| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. |
| 7 |
* Copyright (C) 1999, 2000 by Ralf Baechle |
| 8 |
*/ |
| 9 |
#ifndef _ASM_SN_ADDRS_H |
| 10 |
#define _ASM_SN_ADDRS_H |
| 11 |
|
| 12 |
|
| 13 |
#ifndef __ASSEMBLER__ |
| 14 |
#include <linux/smp.h> |
| 15 |
#include <linux/types.h> |
| 16 |
#endif /* !__ASSEMBLER__ */ |
| 17 |
|
| 18 |
#include <asm/addrspace.h> |
| 19 |
#include <asm/sn/kldir.h> |
| 20 |
|
| 21 |
#if defined(CONFIG_SGI_IP27) |
| 22 |
#include <asm/sn/sn0/addrs.h> |
| 23 |
#elif defined(CONFIG_SGI_IP35) |
| 24 |
#include <asm/sn/sn1/addrs.h> |
| 25 |
#endif |
| 26 |
|
| 27 |
|
| 28 |
#ifndef __ASSEMBLER__ |
| 29 |
|
| 30 |
#define UINT64_CAST (unsigned long) |
| 31 |
|
| 32 |
#else /* __ASSEMBLER__ */ |
| 33 |
|
| 34 |
#define UINT64_CAST |
| 35 |
|
| 36 |
#endif /* __ASSEMBLER__ */ |
| 37 |
|
| 38 |
|
| 39 |
#define NASID_GET_META(_n) ((_n) >> NASID_LOCAL_BITS) |
| 40 |
#ifdef CONFIG_SGI_IP27 |
| 41 |
#define NASID_GET_LOCAL(_n) ((_n) & 0xf) |
| 42 |
#endif |
| 43 |
#define NASID_MAKE(_m, _l) (((_m) << NASID_LOCAL_BITS) | (_l)) |
| 44 |
|
| 45 |
#define NODE_ADDRSPACE_MASK (NODE_ADDRSPACE_SIZE - 1) |
| 46 |
#define TO_NODE_ADDRSPACE(_pa) (UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK) |
| 47 |
|
| 48 |
#define CHANGE_ADDR_NASID(_pa, _nasid) \ |
| 49 |
((UINT64_CAST(_pa) & ~NASID_MASK) | \ |
| 50 |
(UINT64_CAST(_nasid) << NASID_SHFT)) |
| 51 |
|
| 52 |
|
| 53 |
/* |
| 54 |
* The following macros are used to index to the beginning of a specific |
| 55 |
* node's address space. |
| 56 |
*/ |
| 57 |
|
| 58 |
#define NODE_OFFSET(_n) (UINT64_CAST (_n) << NODE_SIZE_BITS) |
| 59 |
|
| 60 |
#define NODE_CAC_BASE(_n) (CAC_BASE + NODE_OFFSET(_n)) |
| 61 |
#define NODE_HSPEC_BASE(_n) (HSPEC_BASE + NODE_OFFSET(_n)) |
| 62 |
#define NODE_IO_BASE(_n) (IO_BASE + NODE_OFFSET(_n)) |
| 63 |
#define NODE_MSPEC_BASE(_n) (MSPEC_BASE + NODE_OFFSET(_n)) |
| 64 |
#define NODE_UNCAC_BASE(_n) (UNCAC_BASE + NODE_OFFSET(_n)) |
| 65 |
|
| 66 |
#define TO_NODE(_n, _x) (NODE_OFFSET(_n) | ((_x) )) |
| 67 |
#define TO_NODE_CAC(_n, _x) (NODE_CAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) |
| 68 |
#define TO_NODE_UNCAC(_n, _x) (NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) |
| 69 |
#define TO_NODE_MSPEC(_n, _x) (NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) |
| 70 |
#define TO_NODE_HSPEC(_n, _x) (NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) |
| 71 |
|
| 72 |
|
| 73 |
#define RAW_NODE_SWIN_BASE(nasid, widget) \ |
| 74 |
(NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) |
| 75 |
|
| 76 |
#define WIDGETID_GET(addr) ((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff)) |
| 77 |
|
| 78 |
/* |
| 79 |
* The following definitions pertain to the IO special address |
| 80 |
* space. They define the location of the big and little windows |
| 81 |
* of any given node. |
| 82 |
*/ |
| 83 |
|
| 84 |
#define SWIN_SIZE_BITS 24 |
| 85 |
#define SWIN_SIZE (UINT64_CAST 1 << 24) |
| 86 |
#define SWIN_SIZEMASK (SWIN_SIZE - 1) |
| 87 |
#define SWIN_WIDGET_MASK 0xF |
| 88 |
|
| 89 |
/* |
| 90 |
* Convert smallwindow address to xtalk address. |
| 91 |
* |
| 92 |
* 'addr' can be physical or virtual address, but will be converted |
| 93 |
* to Xtalk address in the range 0 -> SWINZ_SIZEMASK |
| 94 |
*/ |
| 95 |
#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) |
| 96 |
#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) |
| 97 |
/* |
| 98 |
* Verify if addr belongs to small window address on node with "nasid" |
| 99 |
* |
| 100 |
* |
| 101 |
* NOTE: "addr" is expected to be XKPHYS address, and NOT physical |
| 102 |
* address |
| 103 |
* |
| 104 |
* |
| 105 |
*/ |
| 106 |
#define NODE_SWIN_ADDR(nasid, addr) \ |
| 107 |
(((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ |
| 108 |
((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ |
| 109 |
)) |
| 110 |
|
| 111 |
/* |
| 112 |
* The following define the major position-independent aliases used |
| 113 |
* in SN. |
| 114 |
* UALIAS -- 256MB in size, reads in the UALIAS result in |
| 115 |
* uncached references to the memory of the reader's node. |
| 116 |
* CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped |
| 117 |
* depending on which CPU does the access to provide |
| 118 |
* all CPUs with unique uncached memory at low addresses. |
| 119 |
* LBOOT -- 256MB in size, reads in the LBOOT area result in |
| 120 |
* uncached references to the local hub's boot prom and |
| 121 |
* other directory-bus connected devices. |
| 122 |
* IALIAS -- 8MB in size, reads in the IALIAS result in uncached |
| 123 |
* references to the local hub's registers. |
| 124 |
*/ |
| 125 |
|
| 126 |
#define UALIAS_BASE HSPEC_BASE |
| 127 |
#define UALIAS_SIZE 0x10000000 /* 256 Megabytes */ |
| 128 |
#define UALIAS_LIMIT (UALIAS_BASE + UALIAS_SIZE) |
| 129 |
|
| 130 |
/* |
| 131 |
* The bottom of ualias space is flipped depending on whether you're |
| 132 |
* processor 0 or 1 within a node. |
| 133 |
*/ |
| 134 |
#ifdef CONFIG_SGI_IP27 |
| 135 |
#define UALIAS_FLIP_BASE UALIAS_BASE |
| 136 |
#define UALIAS_FLIP_SIZE 0x20000 |
| 137 |
#define UALIAS_FLIP_BIT 0x10000 |
| 138 |
#define UALIAS_FLIP_ADDR(_x) (cputoslice(smp_processor_id()) ? \ |
| 139 |
(_x) ^ UALIAS_FLIP_BIT : (_x)) |
| 140 |
|
| 141 |
#define LBOOT_BASE (HSPEC_BASE + 0x10000000) |
| 142 |
#define LBOOT_SIZE 0x10000000 |
| 143 |
#define LBOOT_LIMIT (LBOOT_BASE + LBOOT_SIZE) |
| 144 |
#define LBOOT_STRIDE 0 /* IP27 has only one CPU PROM */ |
| 145 |
|
| 146 |
#endif |
| 147 |
|
| 148 |
#define HUB_REGISTER_WIDGET 1 |
| 149 |
#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) |
| 150 |
#define IALIAS_SIZE 0x800000 /* 8 Megabytes */ |
| 151 |
#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ |
| 152 |
((_a) < (IALIAS_BASE + IALIAS_SIZE))) |
| 153 |
|
| 154 |
/* |
| 155 |
* Macro for referring to Hub's RBOOT space |
| 156 |
*/ |
| 157 |
|
| 158 |
#ifdef CONFIG_SGI_IP27 |
| 159 |
#define RBOOT_SIZE 0x10000000 /* 256 Megabytes */ |
| 160 |
#define NODE_RBOOT_BASE(_n) (NODE_HSPEC_BASE(_n) + 0x30000000) |
| 161 |
#define NODE_RBOOT_LIMIT(_n) (NODE_RBOOT_BASE(_n) + RBOOT_SIZE) |
| 162 |
|
| 163 |
#endif |
| 164 |
|
| 165 |
/* |
| 166 |
* Macros for referring the Hub's back door space |
| 167 |
* |
| 168 |
* These macros correctly process addresses in any node's space. |
| 169 |
* WARNING: They won't work in assembler. |
| 170 |
* |
| 171 |
* BDDIR_ENTRY_LO returns the address of the low double-word of the dir |
| 172 |
* entry corresponding to a physical (Cac or Uncac) address. |
| 173 |
* BDDIR_ENTRY_HI returns the address of the high double-word of the entry. |
| 174 |
* BDPRT_ENTRY returns the address of the double-word protection entry |
| 175 |
* corresponding to the page containing the physical address. |
| 176 |
* BDPRT_ENTRY_S Stores the value into the protection entry. |
| 177 |
* BDPRT_ENTRY_L Load the value from the protection entry. |
| 178 |
* BDECC_ENTRY returns the address of the ECC byte corresponding to a |
| 179 |
* double-word at a specified physical address. |
| 180 |
* BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a |
| 181 |
* quad-word at a specified physical address. |
| 182 |
*/ |
| 183 |
#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) |
| 184 |
|
| 185 |
#define NODE_BDECC_BASE(_n) (NODE_BDOOR_BASE(_n)) |
| 186 |
#define NODE_BDDIR_BASE(_n) (NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4)) |
| 187 |
#ifdef CONFIG_SGI_IP27 |
| 188 |
#define BDDIR_ENTRY_LO(_pa) ((HSPEC_BASE + \ |
| 189 |
NODE_ADDRSPACE_SIZE * 3 / 4 + \ |
| 190 |
0x200) | \ |
| 191 |
UINT64_CAST(_pa) & NASID_MASK | \ |
| 192 |
UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ |
| 193 |
UINT64_CAST(_pa) >> 3 & 0x1f << 4) |
| 194 |
|
| 195 |
#define BDDIR_ENTRY_HI(_pa) ((HSPEC_BASE + \ |
| 196 |
NODE_ADDRSPACE_SIZE * 3 / 4 + \ |
| 197 |
0x208) | \ |
| 198 |
UINT64_CAST(_pa) & NASID_MASK | \ |
| 199 |
UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ |
| 200 |
UINT64_CAST(_pa) >> 3 & 0x1f << 4) |
| 201 |
|
| 202 |
#define BDPRT_ENTRY(_pa, _rgn) ((HSPEC_BASE + \ |
| 203 |
NODE_ADDRSPACE_SIZE * 3 / 4) | \ |
| 204 |
UINT64_CAST(_pa) & NASID_MASK | \ |
| 205 |
UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ |
| 206 |
(_rgn) << 3) |
| 207 |
#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn))) |
| 208 |
#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val)) |
| 209 |
#define BDPRT_ENTRY_L(_pa, _rgn) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))) |
| 210 |
|
| 211 |
#define BDECC_ENTRY(_pa) ((HSPEC_BASE + \ |
| 212 |
NODE_ADDRSPACE_SIZE / 2) | \ |
| 213 |
UINT64_CAST(_pa) & NASID_MASK | \ |
| 214 |
UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK | \ |
| 215 |
UINT64_CAST(_pa) >> 3 & 3) |
| 216 |
|
| 217 |
/* |
| 218 |
* Macro to convert a back door directory or protection address into the |
| 219 |
* raw physical address of the associated cache line or protection page. |
| 220 |
*/ |
| 221 |
#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) |
| 222 |
#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) |
| 223 |
|
| 224 |
#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ |
| 225 |
(UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ |
| 226 |
(UINT64_CAST(_ba) & 0x1f << 4) << 3) |
| 227 |
|
| 228 |
#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ |
| 229 |
(UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) |
| 230 |
|
| 231 |
#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ |
| 232 |
(UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2 | \ |
| 233 |
(UINT64_CAST(_ba) & 3) << 3) |
| 234 |
#endif /* CONFIG_SGI_IP27 */ |
| 235 |
|
| 236 |
|
| 237 |
/* |
| 238 |
* The following macros produce the correct base virtual address for |
| 239 |
* the hub registers. The LOCAL_HUB_* macros produce the appropriate |
| 240 |
* address for the local registers. The REMOTE_HUB_* macro produce |
| 241 |
* the address for the specified hub's registers. The intent is |
| 242 |
* that the appropriate PI, MD, NI, or II register would be substituted |
| 243 |
* for _x. |
| 244 |
*/ |
| 245 |
|
| 246 |
/* |
| 247 |
* WARNING: |
| 248 |
* When certain Hub chip workaround are defined, it's not sufficient |
| 249 |
* to dereference the *_HUB_ADDR() macros. You should instead use |
| 250 |
* HUB_L() and HUB_S() if you must deal with pointers to hub registers. |
| 251 |
* Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). |
| 252 |
* They're always safe. |
| 253 |
*/ |
| 254 |
#define LOCAL_HUB_ADDR(_x) (IALIAS_BASE + (_x)) |
| 255 |
#define REMOTE_HUB_ADDR(_n, _x) ((NODE_SWIN_BASE(_n, 1) + 0x800000 + (_x))) |
| 256 |
|
| 257 |
#ifndef __ASSEMBLER__ |
| 258 |
|
| 259 |
#define LOCAL_HUB_PTR(_x) ((u64 *)LOCAL_HUB_ADDR((_x))) |
| 260 |
#define REMOTE_HUB_PTR(_n, _x) ((u64 *)REMOTE_HUB_ADDR((_n), (_x))) |
| 261 |
|
| 262 |
#define LOCAL_HUB_L(_r) __raw_readq(LOCAL_HUB_PTR(_r)) |
| 263 |
#define LOCAL_HUB_S(_r, _d) __raw_writeq((_d), LOCAL_HUB_PTR(_r)) |
| 264 |
#define REMOTE_HUB_L(_n, _r) __raw_readq(REMOTE_HUB_PTR((_n), (_r))) |
| 265 |
#define REMOTE_HUB_S(_n, _r, _d) __raw_writeq((_d), \ |
| 266 |
REMOTE_HUB_PTR((_n), (_r))) |
| 267 |
|
| 268 |
#endif /* !__ASSEMBLER__ */ |
| 269 |
|
| 270 |
/* |
| 271 |
* Software structure locations -- permanently fixed |
| 272 |
* See diagram in kldir.h |
| 273 |
*/ |
| 274 |
|
| 275 |
#define PHYS_RAMBASE 0x0 |
| 276 |
#define K0_RAMBASE PHYS_TO_K0(PHYS_RAMBASE) |
| 277 |
|
| 278 |
#define EX_HANDLER_OFFSET(slice) ((slice) << 16) |
| 279 |
#define EX_HANDLER_ADDR(nasid, slice) \ |
| 280 |
PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice)) |
| 281 |
#define EX_HANDLER_SIZE 0x0400 |
| 282 |
|
| 283 |
#define EX_FRAME_OFFSET(slice) ((slice) << 16 | 0x400) |
| 284 |
#define EX_FRAME_ADDR(nasid, slice) \ |
| 285 |
PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice)) |
| 286 |
#define EX_FRAME_SIZE 0x0c00 |
| 287 |
|
| 288 |
#define ARCS_SPB_OFFSET 0x1000 |
| 289 |
#define ARCS_SPB_ADDR(nasid) \ |
| 290 |
PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) |
| 291 |
#define ARCS_SPB_SIZE 0x0400 |
| 292 |
|
| 293 |
#define KLDIR_OFFSET 0x2000 |
| 294 |
#define KLDIR_ADDR(nasid) \ |
| 295 |
TO_NODE_UNCAC((nasid), KLDIR_OFFSET) |
| 296 |
#define KLDIR_SIZE 0x0400 |
| 297 |
|
| 298 |
|
| 299 |
/* |
| 300 |
* Software structure locations -- indirected through KLDIR |
| 301 |
* See diagram in kldir.h |
| 302 |
* |
| 303 |
* Important: All low memory structures must only be accessed |
| 304 |
* uncached, except for the symmon stacks. |
| 305 |
*/ |
| 306 |
|
| 307 |
#define KLI_LAUNCH 0 /* Dir. entries */ |
| 308 |
#define KLI_KLCONFIG 1 |
| 309 |
#define KLI_NMI 2 |
| 310 |
#define KLI_GDA 3 |
| 311 |
#define KLI_FREEMEM 4 |
| 312 |
#define KLI_SYMMON_STK 5 |
| 313 |
#define KLI_PI_ERROR 6 |
| 314 |
#define KLI_KERN_VARS 7 |
| 315 |
#define KLI_KERN_XP 8 |
| 316 |
#define KLI_KERN_PARTID 9 |
| 317 |
|
| 318 |
#ifndef __ASSEMBLER__ |
| 319 |
|
| 320 |
#define KLD_BASE(nasid) ((kldir_ent_t *) KLDIR_ADDR(nasid)) |
| 321 |
#define KLD_LAUNCH(nasid) (KLD_BASE(nasid) + KLI_LAUNCH) |
| 322 |
#define KLD_NMI(nasid) (KLD_BASE(nasid) + KLI_NMI) |
| 323 |
#define KLD_KLCONFIG(nasid) (KLD_BASE(nasid) + KLI_KLCONFIG) |
| 324 |
#define KLD_PI_ERROR(nasid) (KLD_BASE(nasid) + KLI_PI_ERROR) |
| 325 |
#define KLD_GDA(nasid) (KLD_BASE(nasid) + KLI_GDA) |
| 326 |
#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) |
| 327 |
#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) |
| 328 |
#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) |
| 329 |
#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) |
| 330 |
#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) |
| 331 |
|
| 332 |
#define LAUNCH_OFFSET(nasid, slice) \ |
| 333 |
(KLD_LAUNCH(nasid)->offset + \ |
| 334 |
KLD_LAUNCH(nasid)->stride * (slice)) |
| 335 |
#define LAUNCH_ADDR(nasid, slice) \ |
| 336 |
TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) |
| 337 |
#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size |
| 338 |
|
| 339 |
#define SN_NMI_OFFSET(nasid, slice) \ |
| 340 |
(KLD_NMI(nasid)->offset + \ |
| 341 |
KLD_NMI(nasid)->stride * (slice)) |
| 342 |
#define NMI_ADDR(nasid, slice) \ |
| 343 |
TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) |
| 344 |
#define NMI_SIZE(nasid) KLD_NMI(nasid)->size |
| 345 |
|
| 346 |
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset |
| 347 |
#define KLCONFIG_ADDR(nasid) \ |
| 348 |
TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid)) |
| 349 |
#define KLCONFIG_SIZE(nasid) KLD_KLCONFIG(nasid)->size |
| 350 |
|
| 351 |
#define GDA_ADDR(nasid) KLD_GDA(nasid)->pointer |
| 352 |
#define GDA_SIZE(nasid) KLD_GDA(nasid)->size |
| 353 |
|
| 354 |
#define SYMMON_STK_OFFSET(nasid, slice) \ |
| 355 |
(KLD_SYMMON_STK(nasid)->offset + \ |
| 356 |
KLD_SYMMON_STK(nasid)->stride * (slice)) |
| 357 |
#define SYMMON_STK_STRIDE(nasid) KLD_SYMMON_STK(nasid)->stride |
| 358 |
|
| 359 |
#define SYMMON_STK_ADDR(nasid, slice) \ |
| 360 |
TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice)) |
| 361 |
|
| 362 |
#define SYMMON_STK_SIZE(nasid) KLD_SYMMON_STK(nasid)->stride |
| 363 |
|
| 364 |
#define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size) |
| 365 |
|
| 366 |
#define NODE_OFFSET_TO_K0(_nasid, _off) \ |
| 367 |
PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE) |
| 368 |
#define NODE_OFFSET_TO_K1(_nasid, _off) \ |
| 369 |
TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE) |
| 370 |
|
| 371 |
#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer |
| 372 |
#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size |
| 373 |
|
| 374 |
#endif /* !__ASSEMBLER__ */ |
| 375 |
|
| 376 |
|
| 377 |
#endif /* _ASM_SN_ADDRS_H */ |