| 1 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Imagination Technologies |
| 4 |
* Author: Paul Burton <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#ifndef __MIPS_ASM_MIPS_CPS_H__ |
| 8 |
# error Please include asm/mips-cps.h rather than asm/mips-cm.h |
| 9 |
#endif |
| 10 |
|
| 11 |
#ifndef __MIPS_ASM_MIPS_CM_H__ |
| 12 |
#define __MIPS_ASM_MIPS_CM_H__ |
| 13 |
|
| 14 |
#include <linux/bitfield.h> |
| 15 |
#include <linux/bitops.h> |
| 16 |
#include <linux/errno.h> |
| 17 |
|
| 18 |
/* The base address of the CM GCR block */ |
| 19 |
extern void __iomem *mips_gcr_base; |
| 20 |
|
| 21 |
/* The base address of the CM L2-only sync region */ |
| 22 |
extern void __iomem *mips_cm_l2sync_base; |
| 23 |
|
| 24 |
/** |
| 25 |
* mips_cm_phys_base - retrieve the physical base address of the CM |
| 26 |
* |
| 27 |
* This function returns the physical base address of the Coherence Manager |
| 28 |
* global control block, or 0 if no Coherence Manager is present. It provides |
| 29 |
* a default implementation which reads the CMGCRBase register where available, |
| 30 |
* and may be overridden by platforms which determine this address in a |
| 31 |
* different way by defining a function with the same prototype. |
| 32 |
*/ |
| 33 |
extern phys_addr_t mips_cm_phys_base(void); |
| 34 |
|
| 35 |
/** |
| 36 |
* mips_cm_l2sync_phys_base - retrieve the physical base address of the CM |
| 37 |
* L2-sync region |
| 38 |
* |
| 39 |
* This function returns the physical base address of the Coherence Manager |
| 40 |
* L2-cache only region. It provides a default implementation which reads the |
| 41 |
* CMGCRL2OnlySyncBase register where available or returns a 4K region just |
| 42 |
* behind the CM GCR base address. It may be overridden by platforms which |
| 43 |
* determine this address in a different way by defining a function with the |
| 44 |
* same prototype. |
| 45 |
*/ |
| 46 |
extern phys_addr_t mips_cm_l2sync_phys_base(void); |
| 47 |
|
| 48 |
/* |
| 49 |
* mips_cm_is64 - determine CM register width |
| 50 |
* |
| 51 |
* The CM register width is determined by the version of the CM, with CM3 |
| 52 |
* introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs. |
| 53 |
* However we may run a kernel built for MIPS32 on a system with 64 bit GCRs, |
| 54 |
* or vice-versa. This variable indicates the width of the memory accesses |
| 55 |
* that the kernel will perform to GCRs, which may differ from the actual |
| 56 |
* width of the GCRs. |
| 57 |
* |
| 58 |
* It's set to 0 for 32-bit accesses and 1 for 64-bit accesses. |
| 59 |
*/ |
| 60 |
extern int mips_cm_is64; |
| 61 |
|
| 62 |
/* |
| 63 |
* mips_cm_is_l2_hci_broken - determine if HCI is broken |
| 64 |
* |
| 65 |
* Some CM reports show that Hardware Cache Initialization is |
| 66 |
* complete, but in reality it's not the case. They also incorrectly |
| 67 |
* indicate that Hardware Cache Initialization is supported. This |
| 68 |
* flags allows warning about this broken feature. |
| 69 |
*/ |
| 70 |
extern bool mips_cm_is_l2_hci_broken; |
| 71 |
|
| 72 |
/** |
| 73 |
* mips_cm_error_report - Report CM cache errors |
| 74 |
*/ |
| 75 |
#ifdef CONFIG_MIPS_CM |
| 76 |
extern void mips_cm_error_report(void); |
| 77 |
#else |
| 78 |
static inline void mips_cm_error_report(void) {} |
| 79 |
#endif |
| 80 |
|
| 81 |
/** |
| 82 |
* mips_cm_probe - probe for a Coherence Manager |
| 83 |
* |
| 84 |
* Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM |
| 85 |
* is successfully detected, else -errno. |
| 86 |
*/ |
| 87 |
#ifdef CONFIG_MIPS_CM |
| 88 |
extern int mips_cm_probe(void); |
| 89 |
#else |
| 90 |
static inline int mips_cm_probe(void) |
| 91 |
{ |
| 92 |
return -ENODEV; |
| 93 |
} |
| 94 |
#endif |
| 95 |
|
| 96 |
/** |
| 97 |
* mips_cm_present - determine whether a Coherence Manager is present |
| 98 |
* |
| 99 |
* Returns true if a CM is present in the system, else false. |
| 100 |
*/ |
| 101 |
static inline bool mips_cm_present(void) |
| 102 |
{ |
| 103 |
#ifdef CONFIG_MIPS_CM |
| 104 |
return mips_gcr_base != NULL; |
| 105 |
#else |
| 106 |
return false; |
| 107 |
#endif |
| 108 |
} |
| 109 |
|
| 110 |
/** |
| 111 |
* mips_cm_update_property - update property from the device tree |
| 112 |
* |
| 113 |
* Retrieve the properties from the device tree if a CM node exist and |
| 114 |
* update the internal variable based on this. |
| 115 |
*/ |
| 116 |
#ifdef CONFIG_MIPS_CM |
| 117 |
extern void mips_cm_update_property(void); |
| 118 |
#else |
| 119 |
static inline void mips_cm_update_property(void) {} |
| 120 |
#endif |
| 121 |
|
| 122 |
/** |
| 123 |
* mips_cm_has_l2sync - determine whether an L2-only sync region is present |
| 124 |
* |
| 125 |
* Returns true if the system implements an L2-only sync region, else false. |
| 126 |
*/ |
| 127 |
static inline bool mips_cm_has_l2sync(void) |
| 128 |
{ |
| 129 |
#ifdef CONFIG_MIPS_CM |
| 130 |
return mips_cm_l2sync_base != NULL; |
| 131 |
#else |
| 132 |
return false; |
| 133 |
#endif |
| 134 |
} |
| 135 |
|
| 136 |
/* Offsets to register blocks from the CM base address */ |
| 137 |
#define MIPS_CM_GCB_OFS 0x0000 /* Global Control Block */ |
| 138 |
#define MIPS_CM_CLCB_OFS 0x2000 /* Core Local Control Block */ |
| 139 |
#define MIPS_CM_COCB_OFS 0x4000 /* Core Other Control Block */ |
| 140 |
#define MIPS_CM_GDB_OFS 0x6000 /* Global Debug Block */ |
| 141 |
|
| 142 |
/* Total size of the CM memory mapped registers */ |
| 143 |
#define MIPS_CM_GCR_SIZE 0x8000 |
| 144 |
|
| 145 |
/* Size of the L2-only sync region */ |
| 146 |
#define MIPS_CM_L2SYNC_SIZE 0x1000 |
| 147 |
|
| 148 |
#define GCR_ACCESSOR_RO(sz, off, name) \ |
| 149 |
CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_GCB_OFS + off, name) \ |
| 150 |
CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name) |
| 151 |
|
| 152 |
#define GCR_ACCESSOR_RW(sz, off, name) \ |
| 153 |
CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_GCB_OFS + off, name) \ |
| 154 |
CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name) |
| 155 |
|
| 156 |
#define GCR_CX_ACCESSOR_RO(sz, off, name) \ |
| 157 |
CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \ |
| 158 |
CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name) |
| 159 |
|
| 160 |
#define GCR_CX_ACCESSOR_RW(sz, off, name) \ |
| 161 |
CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \ |
| 162 |
CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name) |
| 163 |
|
| 164 |
/* GCR_CONFIG - Information about the system */ |
| 165 |
GCR_ACCESSOR_RO(64, 0x000, config) |
| 166 |
#define CM_GCR_CONFIG_CLUSTER_COH_CAPABLE BIT_ULL(43) |
| 167 |
#define CM_GCR_CONFIG_CLUSTER_ID GENMASK_ULL(39, 32) |
| 168 |
#define CM_GCR_CONFIG_NUM_CLUSTERS GENMASK(29, 23) |
| 169 |
#define CM_GCR_CONFIG_NUMIOCU GENMASK(15, 8) |
| 170 |
#define CM_GCR_CONFIG_PCORES GENMASK(7, 0) |
| 171 |
|
| 172 |
/* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */ |
| 173 |
GCR_ACCESSOR_RW(64, 0x008, base) |
| 174 |
#define CM_GCR_BASE_GCRBASE GENMASK_ULL(47, 15) |
| 175 |
#define CM_GCR_BASE_CMDEFTGT GENMASK(1, 0) |
| 176 |
#define CM_GCR_BASE_CMDEFTGT_MEM 0 |
| 177 |
#define CM_GCR_BASE_CMDEFTGT_RESERVED 1 |
| 178 |
#define CM_GCR_BASE_CMDEFTGT_IOCU0 2 |
| 179 |
#define CM_GCR_BASE_CMDEFTGT_IOCU1 3 |
| 180 |
|
| 181 |
/* GCR_ACCESS - Controls core/IOCU access to GCRs */ |
| 182 |
GCR_ACCESSOR_RW(32, 0x020, access) |
| 183 |
#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0) |
| 184 |
|
| 185 |
/* GCR_REV - Indicates the Coherence Manager revision */ |
| 186 |
GCR_ACCESSOR_RO(32, 0x030, rev) |
| 187 |
#define CM_GCR_REV_MAJOR GENMASK(15, 8) |
| 188 |
#define CM_GCR_REV_MINOR GENMASK(7, 0) |
| 189 |
|
| 190 |
#define CM_ENCODE_REV(major, minor) \ |
| 191 |
(FIELD_PREP(CM_GCR_REV_MAJOR, major) | \ |
| 192 |
FIELD_PREP(CM_GCR_REV_MINOR, minor)) |
| 193 |
|
| 194 |
#define CM_REV_CM2 CM_ENCODE_REV(6, 0) |
| 195 |
#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0) |
| 196 |
#define CM_REV_CM3 CM_ENCODE_REV(8, 0) |
| 197 |
#define CM_REV_CM3_5 CM_ENCODE_REV(9, 0) |
| 198 |
|
| 199 |
/* GCR_ERR_CONTROL - Control error checking logic */ |
| 200 |
GCR_ACCESSOR_RW(32, 0x038, err_control) |
| 201 |
#define CM_GCR_ERR_CONTROL_L2_ECC_EN BIT(1) |
| 202 |
#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT BIT(0) |
| 203 |
|
| 204 |
/* GCR_ERR_MASK - Control which errors are reported as interrupts */ |
| 205 |
GCR_ACCESSOR_RW(64, 0x040, error_mask) |
| 206 |
|
| 207 |
/* GCR_ERR_CAUSE - Indicates the type of error that occurred */ |
| 208 |
GCR_ACCESSOR_RW(64, 0x048, error_cause) |
| 209 |
#define CM_GCR_ERROR_CAUSE_ERRTYPE GENMASK(31, 27) |
| 210 |
#define CM3_GCR_ERROR_CAUSE_ERRTYPE GENMASK_ULL(63, 58) |
| 211 |
#define CM_GCR_ERROR_CAUSE_ERRINFO GENMASK(26, 0) |
| 212 |
|
| 213 |
/* GCR_ERR_ADDR - Indicates the address associated with an error */ |
| 214 |
GCR_ACCESSOR_RW(64, 0x050, error_addr) |
| 215 |
|
| 216 |
/* GCR_ERR_MULT - Indicates when multiple errors have occurred */ |
| 217 |
GCR_ACCESSOR_RW(64, 0x058, error_mult) |
| 218 |
#define CM_GCR_ERROR_MULT_ERR2ND GENMASK(4, 0) |
| 219 |
|
| 220 |
/* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */ |
| 221 |
GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base) |
| 222 |
#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE GENMASK(31, 12) |
| 223 |
#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN BIT(0) |
| 224 |
|
| 225 |
/* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */ |
| 226 |
GCR_ACCESSOR_RW(64, 0x080, gic_base) |
| 227 |
#define CM_GCR_GIC_BASE_GICBASE GENMASK(31, 17) |
| 228 |
#define CM_GCR_GIC_BASE_GICEN BIT(0) |
| 229 |
|
| 230 |
/* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */ |
| 231 |
GCR_ACCESSOR_RW(64, 0x088, cpc_base) |
| 232 |
#define CM_GCR_CPC_BASE_CPCBASE GENMASK(31, 15) |
| 233 |
#define CM_GCR_CPC_BASE_CPCEN BIT(0) |
| 234 |
|
| 235 |
/* GCR_REGn_BASE - Base addresses of CM address regions */ |
| 236 |
GCR_ACCESSOR_RW(64, 0x090, reg0_base) |
| 237 |
GCR_ACCESSOR_RW(64, 0x0a0, reg1_base) |
| 238 |
GCR_ACCESSOR_RW(64, 0x0b0, reg2_base) |
| 239 |
GCR_ACCESSOR_RW(64, 0x0c0, reg3_base) |
| 240 |
#define CM_GCR_REGn_BASE_BASEADDR GENMASK(31, 16) |
| 241 |
|
| 242 |
/* GCR_REGn_MASK - Size & destination of CM address regions */ |
| 243 |
GCR_ACCESSOR_RW(64, 0x098, reg0_mask) |
| 244 |
GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask) |
| 245 |
GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask) |
| 246 |
GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask) |
| 247 |
#define CM_GCR_REGn_MASK_ADDRMASK GENMASK(31, 16) |
| 248 |
#define CM_GCR_REGn_MASK_CCAOVR GENMASK(7, 5) |
| 249 |
#define CM_GCR_REGn_MASK_CCAOVREN BIT(4) |
| 250 |
#define CM_GCR_REGn_MASK_DROPL2 BIT(2) |
| 251 |
#define CM_GCR_REGn_MASK_CMTGT GENMASK(1, 0) |
| 252 |
#define CM_GCR_REGn_MASK_CMTGT_DISABLED 0x0 |
| 253 |
#define CM_GCR_REGn_MASK_CMTGT_MEM 0x1 |
| 254 |
#define CM_GCR_REGn_MASK_CMTGT_IOCU0 0x2 |
| 255 |
#define CM_GCR_REGn_MASK_CMTGT_IOCU1 0x3 |
| 256 |
|
| 257 |
/* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */ |
| 258 |
GCR_ACCESSOR_RO(32, 0x0d0, gic_status) |
| 259 |
#define CM_GCR_GIC_STATUS_EX BIT(0) |
| 260 |
|
| 261 |
/* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */ |
| 262 |
GCR_ACCESSOR_RO(32, 0x0f0, cpc_status) |
| 263 |
#define CM_GCR_CPC_STATUS_EX BIT(0) |
| 264 |
|
| 265 |
/* GCR_ACCESS - Controls core/IOCU access to GCRs */ |
| 266 |
GCR_ACCESSOR_RW(32, 0x120, access_cm3) |
| 267 |
#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0) |
| 268 |
|
| 269 |
/* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */ |
| 270 |
GCR_ACCESSOR_RW(32, 0x130, l2_config) |
| 271 |
#define CM_GCR_L2_CONFIG_BYPASS BIT(20) |
| 272 |
#define CM_GCR_L2_CONFIG_SET_SIZE GENMASK(15, 12) |
| 273 |
#define CM_GCR_L2_CONFIG_LINE_SIZE GENMASK(11, 8) |
| 274 |
#define CM_GCR_L2_CONFIG_ASSOC GENMASK(7, 0) |
| 275 |
|
| 276 |
/* GCR_SYS_CONFIG2 - Further information about the system */ |
| 277 |
GCR_ACCESSOR_RO(32, 0x150, sys_config2) |
| 278 |
#define CM_GCR_SYS_CONFIG2_MAXVPW GENMASK(3, 0) |
| 279 |
|
| 280 |
/* GCR_L2-RAM_CONFIG - Configuration & status of L2 cache RAMs */ |
| 281 |
GCR_ACCESSOR_RW(64, 0x240, l2_ram_config) |
| 282 |
#define CM_GCR_L2_RAM_CONFIG_PRESENT BIT(31) |
| 283 |
#define CM_GCR_L2_RAM_CONFIG_HCI_DONE BIT(30) |
| 284 |
#define CM_GCR_L2_RAM_CONFIG_HCI_SUPPORTED BIT(29) |
| 285 |
|
| 286 |
/* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */ |
| 287 |
GCR_ACCESSOR_RW(32, 0x300, l2_pft_control) |
| 288 |
#define CM_GCR_L2_PFT_CONTROL_PAGEMASK GENMASK(31, 12) |
| 289 |
#define CM_GCR_L2_PFT_CONTROL_PFTEN BIT(8) |
| 290 |
#define CM_GCR_L2_PFT_CONTROL_NPFT GENMASK(7, 0) |
| 291 |
|
| 292 |
/* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */ |
| 293 |
GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b) |
| 294 |
#define CM_GCR_L2_PFT_CONTROL_B_CEN BIT(8) |
| 295 |
#define CM_GCR_L2_PFT_CONTROL_B_PORTID GENMASK(7, 0) |
| 296 |
|
| 297 |
/* GCR_L2_TAG_ADDR - Access addresses in L2 cache tags */ |
| 298 |
GCR_ACCESSOR_RW(64, 0x600, l2_tag_addr) |
| 299 |
|
| 300 |
/* GCR_L2_TAG_STATE - Access L2 cache tag state */ |
| 301 |
GCR_ACCESSOR_RW(64, 0x608, l2_tag_state) |
| 302 |
|
| 303 |
/* GCR_L2_DATA - Access data in L2 cache lines */ |
| 304 |
GCR_ACCESSOR_RW(64, 0x610, l2_data) |
| 305 |
|
| 306 |
/* GCR_L2_ECC - Access ECC information from L2 cache lines */ |
| 307 |
GCR_ACCESSOR_RW(64, 0x618, l2_ecc) |
| 308 |
|
| 309 |
/* GCR_L2SM_COP - L2 cache op state machine control */ |
| 310 |
GCR_ACCESSOR_RW(32, 0x620, l2sm_cop) |
| 311 |
#define CM_GCR_L2SM_COP_PRESENT BIT(31) |
| 312 |
#define CM_GCR_L2SM_COP_RESULT GENMASK(8, 6) |
| 313 |
#define CM_GCR_L2SM_COP_RESULT_DONTCARE 0 |
| 314 |
#define CM_GCR_L2SM_COP_RESULT_DONE_OK 1 |
| 315 |
#define CM_GCR_L2SM_COP_RESULT_DONE_ERROR 2 |
| 316 |
#define CM_GCR_L2SM_COP_RESULT_ABORT_OK 3 |
| 317 |
#define CM_GCR_L2SM_COP_RESULT_ABORT_ERROR 4 |
| 318 |
#define CM_GCR_L2SM_COP_RUNNING BIT(5) |
| 319 |
#define CM_GCR_L2SM_COP_TYPE GENMASK(4, 2) |
| 320 |
#define CM_GCR_L2SM_COP_TYPE_IDX_WBINV 0 |
| 321 |
#define CM_GCR_L2SM_COP_TYPE_IDX_STORETAG 1 |
| 322 |
#define CM_GCR_L2SM_COP_TYPE_IDX_STORETAGDATA 2 |
| 323 |
#define CM_GCR_L2SM_COP_TYPE_HIT_INV 4 |
| 324 |
#define CM_GCR_L2SM_COP_TYPE_HIT_WBINV 5 |
| 325 |
#define CM_GCR_L2SM_COP_TYPE_HIT_WB 6 |
| 326 |
#define CM_GCR_L2SM_COP_TYPE_FETCHLOCK 7 |
| 327 |
#define CM_GCR_L2SM_COP_CMD GENMASK(1, 0) |
| 328 |
#define CM_GCR_L2SM_COP_CMD_START 1 /* only when idle */ |
| 329 |
#define CM_GCR_L2SM_COP_CMD_ABORT 3 /* only when running */ |
| 330 |
|
| 331 |
/* GCR_L2SM_TAG_ADDR_COP - L2 cache op state machine address control */ |
| 332 |
GCR_ACCESSOR_RW(64, 0x628, l2sm_tag_addr_cop) |
| 333 |
#define CM_GCR_L2SM_TAG_ADDR_COP_NUM_LINES GENMASK_ULL(63, 48) |
| 334 |
#define CM_GCR_L2SM_TAG_ADDR_COP_START_TAG GENMASK_ULL(47, 6) |
| 335 |
|
| 336 |
/* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */ |
| 337 |
GCR_ACCESSOR_RW(64, 0x680, bev_base) |
| 338 |
|
| 339 |
/* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */ |
| 340 |
GCR_CX_ACCESSOR_RW(32, 0x000, reset_release) |
| 341 |
|
| 342 |
/* GCR_Cx_COHERENCE - Controls core coherence */ |
| 343 |
GCR_CX_ACCESSOR_RW(32, 0x008, coherence) |
| 344 |
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN GENMASK(7, 0) |
| 345 |
#define CM3_GCR_Cx_COHERENCE_COHEN BIT(0) |
| 346 |
|
| 347 |
/* GCR_Cx_CONFIG - Information about a core's configuration */ |
| 348 |
GCR_CX_ACCESSOR_RO(32, 0x010, config) |
| 349 |
#define CM_GCR_Cx_CONFIG_IOCUTYPE GENMASK(11, 10) |
| 350 |
#define CM_GCR_Cx_CONFIG_PVPE GENMASK(9, 0) |
| 351 |
|
| 352 |
/* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */ |
| 353 |
GCR_CX_ACCESSOR_RW(32, 0x018, other) |
| 354 |
#define CM_GCR_Cx_OTHER_CORENUM GENMASK(31, 16) /* CM < 3 */ |
| 355 |
#define CM_GCR_Cx_OTHER_CLUSTER_EN BIT(31) /* CM >= 3.5 */ |
| 356 |
#define CM_GCR_Cx_OTHER_GIC_EN BIT(30) /* CM >= 3.5 */ |
| 357 |
#define CM_GCR_Cx_OTHER_BLOCK GENMASK(25, 24) /* CM >= 3.5 */ |
| 358 |
#define CM_GCR_Cx_OTHER_BLOCK_LOCAL 0 |
| 359 |
#define CM_GCR_Cx_OTHER_BLOCK_GLOBAL 1 |
| 360 |
#define CM_GCR_Cx_OTHER_BLOCK_USER 2 |
| 361 |
#define CM_GCR_Cx_OTHER_BLOCK_GLOBAL_HIGH 3 |
| 362 |
#define CM_GCR_Cx_OTHER_CLUSTER GENMASK(21, 16) /* CM >= 3.5 */ |
| 363 |
#define CM3_GCR_Cx_OTHER_CORE GENMASK(13, 8) /* CM >= 3 */ |
| 364 |
#define CM_GCR_Cx_OTHER_CORE_CM 32 |
| 365 |
#define CM3_GCR_Cx_OTHER_VP GENMASK(2, 0) /* CM >= 3 */ |
| 366 |
|
| 367 |
/* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */ |
| 368 |
GCR_CX_ACCESSOR_RW(32, 0x020, reset_base) |
| 369 |
GCR_CX_ACCESSOR_RW(64, 0x020, reset64_base) |
| 370 |
#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE GENMASK(31, 12) |
| 371 |
#define CM_GCR_Cx_RESET64_BASE_BEVEXCBASE GENMASK_ULL(47, 12) |
| 372 |
#define CM_GCR_Cx_RESET_BASE_MODE BIT(1) |
| 373 |
|
| 374 |
/* GCR_Cx_ID - Identify the current core */ |
| 375 |
GCR_CX_ACCESSOR_RO(32, 0x028, id) |
| 376 |
#define CM_GCR_Cx_ID_CLUSTER GENMASK(15, 8) |
| 377 |
#define CM_GCR_Cx_ID_CORE GENMASK(7, 0) |
| 378 |
|
| 379 |
/* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */ |
| 380 |
GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base) |
| 381 |
#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET BIT(31) |
| 382 |
#define CM_GCR_Cx_RESET_EXT_BASE_UEB BIT(30) |
| 383 |
#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK GENMASK(27, 20) |
| 384 |
#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA GENMASK(7, 1) |
| 385 |
#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT BIT(0) |
| 386 |
|
| 387 |
/** |
| 388 |
* mips_cm_l2sync - perform an L2-only sync operation |
| 389 |
* |
| 390 |
* If an L2-only sync region is present in the system then this function |
| 391 |
* performs and L2-only sync and returns zero. Otherwise it returns -ENODEV. |
| 392 |
*/ |
| 393 |
static inline int mips_cm_l2sync(void) |
| 394 |
{ |
| 395 |
if (!mips_cm_has_l2sync()) |
| 396 |
return -ENODEV; |
| 397 |
|
| 398 |
writel(0, mips_cm_l2sync_base); |
| 399 |
return 0; |
| 400 |
} |
| 401 |
|
| 402 |
/** |
| 403 |
* mips_cm_revision() - return CM revision |
| 404 |
* |
| 405 |
* Return: The revision of the CM, from GCR_REV, or 0 if no CM is present. The |
| 406 |
* return value should be checked against the CM_REV_* macros. |
| 407 |
*/ |
| 408 |
static inline int mips_cm_revision(void) |
| 409 |
{ |
| 410 |
if (!mips_cm_present()) |
| 411 |
return 0; |
| 412 |
|
| 413 |
return read_gcr_rev(); |
| 414 |
} |
| 415 |
|
| 416 |
/** |
| 417 |
* mips_cm_max_vp_width() - return the width in bits of VP indices |
| 418 |
* |
| 419 |
* Return: the width, in bits, of VP indices in fields that combine core & VP |
| 420 |
* indices. |
| 421 |
*/ |
| 422 |
static inline unsigned int mips_cm_max_vp_width(void) |
| 423 |
{ |
| 424 |
extern int smp_num_siblings; |
| 425 |
|
| 426 |
if (mips_cm_revision() >= CM_REV_CM3) |
| 427 |
return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW, |
| 428 |
read_gcr_sys_config2()); |
| 429 |
|
| 430 |
if (mips_cm_present()) { |
| 431 |
/* |
| 432 |
* We presume that all cores in the system will have the same |
| 433 |
* number of VP(E)s, and if that ever changes then this will |
| 434 |
* need revisiting. |
| 435 |
*/ |
| 436 |
return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1; |
| 437 |
} |
| 438 |
|
| 439 |
if (IS_ENABLED(CONFIG_SMP)) |
| 440 |
return smp_num_siblings; |
| 441 |
|
| 442 |
return 1; |
| 443 |
} |
| 444 |
|
| 445 |
/** |
| 446 |
* mips_cm_vp_id() - calculate the hardware VP ID for a CPU |
| 447 |
* @cpu: the CPU whose VP ID to calculate |
| 448 |
* |
| 449 |
* Hardware such as the GIC uses identifiers for VPs which may not match the |
| 450 |
* CPU numbers used by Linux. This function calculates the hardware VP |
| 451 |
* identifier corresponding to a given CPU. |
| 452 |
* |
| 453 |
* Return: the VP ID for the CPU. |
| 454 |
*/ |
| 455 |
static inline unsigned int mips_cm_vp_id(unsigned int cpu) |
| 456 |
{ |
| 457 |
unsigned int core = cpu_core(&cpu_data[cpu]); |
| 458 |
unsigned int vp = cpu_vpe_id(&cpu_data[cpu]); |
| 459 |
|
| 460 |
return (core * mips_cm_max_vp_width()) + vp; |
| 461 |
} |
| 462 |
|
| 463 |
#ifdef CONFIG_MIPS_CM |
| 464 |
|
| 465 |
/** |
| 466 |
* mips_cm_lock_other - lock access to redirect/other region |
| 467 |
* @cluster: the other cluster to be accessed |
| 468 |
* @core: the other core to be accessed |
| 469 |
* @vp: the VP within the other core to be accessed |
| 470 |
* @block: the register block to be accessed |
| 471 |
* |
| 472 |
* Configure the redirect/other region for the local core/VP (depending upon |
| 473 |
* the CM revision) to target the specified @cluster, @core, @vp & register |
| 474 |
* @block. Must be called before using the redirect/other region, and followed |
| 475 |
* by a call to mips_cm_unlock_other() when access to the redirect/other region |
| 476 |
* is complete. |
| 477 |
* |
| 478 |
* This function acquires a spinlock such that code between it & |
| 479 |
* mips_cm_unlock_other() calls cannot be pre-empted by anything which may |
| 480 |
* reconfigure the redirect/other region, and cannot be interfered with by |
| 481 |
* another VP in the core. As such calls to this function should not be nested. |
| 482 |
*/ |
| 483 |
extern void mips_cm_lock_other(unsigned int cluster, unsigned int core, |
| 484 |
unsigned int vp, unsigned int block); |
| 485 |
|
| 486 |
/** |
| 487 |
* mips_cm_unlock_other - unlock access to redirect/other region |
| 488 |
* |
| 489 |
* Must be called after mips_cm_lock_other() once all required access to the |
| 490 |
* redirect/other region has been completed. |
| 491 |
*/ |
| 492 |
extern void mips_cm_unlock_other(void); |
| 493 |
|
| 494 |
#else /* !CONFIG_MIPS_CM */ |
| 495 |
|
| 496 |
static inline void mips_cm_lock_other(unsigned int cluster, unsigned int core, |
| 497 |
unsigned int vp, unsigned int block) { } |
| 498 |
static inline void mips_cm_unlock_other(void) { } |
| 499 |
|
| 500 |
#endif /* !CONFIG_MIPS_CM */ |
| 501 |
|
| 502 |
/** |
| 503 |
* mips_cm_lock_other_cpu - lock access to redirect/other region |
| 504 |
* @cpu: the other CPU whose register we want to access |
| 505 |
* |
| 506 |
* Configure the redirect/other region for the local core/VP (depending upon |
| 507 |
* the CM revision) to target the specified @cpu & register @block. This is |
| 508 |
* equivalent to calling mips_cm_lock_other() but accepts a Linux CPU number |
| 509 |
* for convenience. |
| 510 |
*/ |
| 511 |
static inline void mips_cm_lock_other_cpu(unsigned int cpu, unsigned int block) |
| 512 |
{ |
| 513 |
struct cpuinfo_mips *d = &cpu_data[cpu]; |
| 514 |
|
| 515 |
mips_cm_lock_other(cpu_cluster(d), cpu_core(d), cpu_vpe_id(d), block); |
| 516 |
} |
| 517 |
|
| 518 |
#endif /* __MIPS_ASM_MIPS_CM_H__ */ |