| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle |
| 7 |
*/ |
| 8 |
#ifndef __ASM_JAZZ_H |
| 9 |
#define __ASM_JAZZ_H |
| 10 |
|
| 11 |
/* |
| 12 |
* The addresses below are virtual address. The mappings are |
| 13 |
* created on startup via wired entries in the tlb. The Mips |
| 14 |
* Magnum R3000 and R4000 machines are similar in many aspects, |
| 15 |
* but many hardware register are accessible at 0xb9000000 in |
| 16 |
* instead of 0xe0000000. |
| 17 |
*/ |
| 18 |
|
| 19 |
#define JAZZ_LOCAL_IO_SPACE 0xe0000000 |
| 20 |
|
| 21 |
/* |
| 22 |
* Revision numbers in PICA_ASIC_REVISION |
| 23 |
* |
| 24 |
* 0xf0000000 - Rev1 |
| 25 |
* 0xf0000001 - Rev2 |
| 26 |
* 0xf0000002 - Rev3 |
| 27 |
*/ |
| 28 |
#define PICA_ASIC_REVISION 0xe0000008 |
| 29 |
|
| 30 |
/* |
| 31 |
* The segments of the seven segment LED are mapped |
| 32 |
* to the control bits as follows: |
| 33 |
* |
| 34 |
* (7) |
| 35 |
* --------- |
| 36 |
* | | |
| 37 |
* (2) | | (6) |
| 38 |
* | (1) | |
| 39 |
* --------- |
| 40 |
* | | |
| 41 |
* (3) | | (5) |
| 42 |
* | (4) | |
| 43 |
* --------- . (0) |
| 44 |
*/ |
| 45 |
#define PICA_LED 0xe000f000 |
| 46 |
|
| 47 |
/* |
| 48 |
* Some characters for the LED control registers |
| 49 |
* The original Mips machines seem to have a LED display |
| 50 |
* with integrated decoder while the Acer machines can |
| 51 |
* control each of the seven segments and the dot independently. |
| 52 |
* It's only a toy, anyway... |
| 53 |
*/ |
| 54 |
#define LED_DOT 0x01 |
| 55 |
#define LED_SPACE 0x00 |
| 56 |
#define LED_0 0xfc |
| 57 |
#define LED_1 0x60 |
| 58 |
#define LED_2 0xda |
| 59 |
#define LED_3 0xf2 |
| 60 |
#define LED_4 0x66 |
| 61 |
#define LED_5 0xb6 |
| 62 |
#define LED_6 0xbe |
| 63 |
#define LED_7 0xe0 |
| 64 |
#define LED_8 0xfe |
| 65 |
#define LED_9 0xf6 |
| 66 |
#define LED_A 0xee |
| 67 |
#define LED_b 0x3e |
| 68 |
#define LED_C 0x9c |
| 69 |
#define LED_d 0x7a |
| 70 |
#define LED_E 0x9e |
| 71 |
#define LED_F 0x8e |
| 72 |
|
| 73 |
#ifndef __ASSEMBLER__ |
| 74 |
|
| 75 |
static __inline__ void pica_set_led(unsigned int bits) |
| 76 |
{ |
| 77 |
volatile unsigned int *led_register = (unsigned int *) PICA_LED; |
| 78 |
|
| 79 |
*led_register = bits; |
| 80 |
} |
| 81 |
|
| 82 |
#endif /* !__ASSEMBLER__ */ |
| 83 |
|
| 84 |
/* |
| 85 |
* Base address of the Sonic Ethernet adapter in Jazz machines. |
| 86 |
*/ |
| 87 |
#define JAZZ_ETHERNET_BASE 0xe0001000 |
| 88 |
|
| 89 |
/* |
| 90 |
* Base address of the 53C94 SCSI hostadapter in Jazz machines. |
| 91 |
*/ |
| 92 |
#define JAZZ_SCSI_BASE 0xe0002000 |
| 93 |
|
| 94 |
/* |
| 95 |
* i8042 keyboard controller for JAZZ and PICA chipsets. |
| 96 |
* This address is just a guess and seems to differ from |
| 97 |
* other mips machines such as RC3xxx... |
| 98 |
*/ |
| 99 |
#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 |
| 100 |
#define JAZZ_KEYBOARD_DATA 0xe0005000 |
| 101 |
#define JAZZ_KEYBOARD_COMMAND 0xe0005001 |
| 102 |
|
| 103 |
#ifndef __ASSEMBLER__ |
| 104 |
|
| 105 |
typedef struct { |
| 106 |
unsigned char data; |
| 107 |
unsigned char command; |
| 108 |
} jazz_keyboard_hardware; |
| 109 |
|
| 110 |
#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) |
| 111 |
|
| 112 |
typedef struct { |
| 113 |
unsigned char pad0[3]; |
| 114 |
unsigned char data; |
| 115 |
unsigned char pad1[3]; |
| 116 |
unsigned char command; |
| 117 |
} mips_keyboard_hardware; |
| 118 |
|
| 119 |
/* |
| 120 |
* For now. Needs to be changed for RC3xxx support. See below. |
| 121 |
*/ |
| 122 |
#define keyboard_hardware jazz_keyboard_hardware |
| 123 |
|
| 124 |
#endif /* !__ASSEMBLER__ */ |
| 125 |
|
| 126 |
/* |
| 127 |
* i8042 keyboard controller for most other Mips machines. |
| 128 |
*/ |
| 129 |
#define MIPS_KEYBOARD_ADDRESS 0xb9005000 |
| 130 |
#define MIPS_KEYBOARD_DATA 0xb9005003 |
| 131 |
#define MIPS_KEYBOARD_COMMAND 0xb9005007 |
| 132 |
|
| 133 |
/* |
| 134 |
* Serial and parallel ports (WD 16C552) on the Mips JAZZ |
| 135 |
*/ |
| 136 |
#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 |
| 137 |
#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 |
| 138 |
#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 |
| 139 |
|
| 140 |
/* |
| 141 |
* Dummy Device Address. Used in jazzdma.c |
| 142 |
*/ |
| 143 |
#define JAZZ_DUMMY_DEVICE 0xe000d000 |
| 144 |
|
| 145 |
/* |
| 146 |
* JAZZ timer registers and interrupt no. |
| 147 |
* Note that the hardware timer interrupt is actually on |
| 148 |
* cpu level 6, but to keep compatibility with PC stuff |
| 149 |
* it is remapped to vector 0. See arch/mips/kernel/entry.S. |
| 150 |
*/ |
| 151 |
#define JAZZ_TIMER_INTERVAL 0xe0000228 |
| 152 |
#define JAZZ_TIMER_REGISTER 0xe0000230 |
| 153 |
|
| 154 |
/* |
| 155 |
* DRAM configuration register |
| 156 |
*/ |
| 157 |
#ifndef __ASSEMBLER__ |
| 158 |
#ifdef __MIPSEL__ |
| 159 |
typedef struct { |
| 160 |
unsigned int bank2 : 3; |
| 161 |
unsigned int bank1 : 3; |
| 162 |
unsigned int mem_bus_width : 1; |
| 163 |
unsigned int reserved2 : 1; |
| 164 |
unsigned int page_mode : 1; |
| 165 |
unsigned int reserved1 : 23; |
| 166 |
} dram_configuration; |
| 167 |
#else /* defined (__MIPSEB__) */ |
| 168 |
typedef struct { |
| 169 |
unsigned int reserved1 : 23; |
| 170 |
unsigned int page_mode : 1; |
| 171 |
unsigned int reserved2 : 1; |
| 172 |
unsigned int mem_bus_width : 1; |
| 173 |
unsigned int bank1 : 3; |
| 174 |
unsigned int bank2 : 3; |
| 175 |
} dram_configuration; |
| 176 |
#endif |
| 177 |
#endif /* !__ASSEMBLER__ */ |
| 178 |
|
| 179 |
#define PICA_DRAM_CONFIG 0xe00fffe0 |
| 180 |
|
| 181 |
/* |
| 182 |
* JAZZ interrupt control registers |
| 183 |
*/ |
| 184 |
#define JAZZ_IO_IRQ_SOURCE 0xe0010000 |
| 185 |
#define JAZZ_IO_IRQ_ENABLE 0xe0010002 |
| 186 |
|
| 187 |
/* |
| 188 |
* JAZZ Interrupt Level definitions |
| 189 |
* |
| 190 |
* This is somewhat broken. For reasons which nobody can remember anymore |
| 191 |
* we remap the Jazz interrupts to the usual ISA style interrupt numbers. |
| 192 |
*/ |
| 193 |
#define JAZZ_IRQ_START 24 |
| 194 |
#define JAZZ_IRQ_END (24 + 9) |
| 195 |
#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) |
| 196 |
#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) |
| 197 |
#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) |
| 198 |
#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) |
| 199 |
#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) |
| 200 |
#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) |
| 201 |
#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) |
| 202 |
#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) |
| 203 |
#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) |
| 204 |
#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) |
| 205 |
|
| 206 |
#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) |
| 207 |
|
| 208 |
|
| 209 |
/* |
| 210 |
* JAZZ DMA Channels |
| 211 |
* Note: Channels 4...7 are not used with respect to the Acer PICA-61 |
| 212 |
* chipset which does not provide these DMA channels. |
| 213 |
*/ |
| 214 |
#define JAZZ_SCSI_DMA 0 /* SCSI */ |
| 215 |
#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ |
| 216 |
#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ |
| 217 |
#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ |
| 218 |
|
| 219 |
/* |
| 220 |
* JAZZ R4030 MCT_ADR chip (DMA controller) |
| 221 |
* Note: Virtual Addresses ! |
| 222 |
*/ |
| 223 |
#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ |
| 224 |
#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ |
| 225 |
#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ |
| 226 |
|
| 227 |
#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ |
| 228 |
#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ |
| 229 |
#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ |
| 230 |
|
| 231 |
#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ |
| 232 |
#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ |
| 233 |
#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ |
| 234 |
|
| 235 |
#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ |
| 236 |
#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ |
| 237 |
#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ |
| 238 |
#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ |
| 239 |
|
| 240 |
/* |
| 241 |
* Remote Speed Registers. |
| 242 |
* |
| 243 |
* 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, |
| 244 |
* 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, |
| 245 |
* 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, |
| 246 |
* 12: reserved, 13: free, 14: 7seg LED, 15: ??? |
| 247 |
*/ |
| 248 |
#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ |
| 249 |
/* 0xE0000070,78,80... 0xE00000E8 */ |
| 250 |
#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ |
| 251 |
#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ |
| 252 |
#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ |
| 253 |
#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ |
| 254 |
|
| 255 |
/* |
| 256 |
* Virtual (E)ISA controller address |
| 257 |
*/ |
| 258 |
#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ |
| 259 |
|
| 260 |
/* |
| 261 |
* Access the R4030 DMA and I/O Controller |
| 262 |
*/ |
| 263 |
#ifndef __ASSEMBLER__ |
| 264 |
|
| 265 |
static inline void r4030_delay(void) |
| 266 |
{ |
| 267 |
__asm__ __volatile__( |
| 268 |
".set\tnoreorder\n\t" |
| 269 |
"nop\n\t" |
| 270 |
"nop\n\t" |
| 271 |
"nop\n\t" |
| 272 |
"nop\n\t" |
| 273 |
".set\treorder"); |
| 274 |
} |
| 275 |
|
| 276 |
static inline unsigned short r4030_read_reg16(unsigned long addr) |
| 277 |
{ |
| 278 |
unsigned short ret = *((volatile unsigned short *)addr); |
| 279 |
r4030_delay(); |
| 280 |
return ret; |
| 281 |
} |
| 282 |
|
| 283 |
static inline unsigned int r4030_read_reg32(unsigned long addr) |
| 284 |
{ |
| 285 |
unsigned int ret = *((volatile unsigned int *)addr); |
| 286 |
r4030_delay(); |
| 287 |
return ret; |
| 288 |
} |
| 289 |
|
| 290 |
static inline void r4030_write_reg16(unsigned long addr, unsigned val) |
| 291 |
{ |
| 292 |
*((volatile unsigned short *)addr) = val; |
| 293 |
r4030_delay(); |
| 294 |
} |
| 295 |
|
| 296 |
static inline void r4030_write_reg32(unsigned long addr, unsigned val) |
| 297 |
{ |
| 298 |
*((volatile unsigned int *)addr) = val; |
| 299 |
r4030_delay(); |
| 300 |
} |
| 301 |
|
| 302 |
#endif /* !__ASSEMBLER__ */ |
| 303 |
|
| 304 |
#define JAZZ_FDC_BASE 0xe0003000 |
| 305 |
#define JAZZ_RTC_BASE 0xe0004000 |
| 306 |
#define JAZZ_PORT_BASE 0xe2000000 |
| 307 |
|
| 308 |
#define JAZZ_EISA_BASE 0xe3000000 |
| 309 |
|
| 310 |
#endif /* __ASM_JAZZ_H */ |