| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/clock/ingenic,tcu.h> |
| 3 |
#include <dt-bindings/clock/ingenic,x1830-cgu.h> |
| 4 |
#include <dt-bindings/dma/x1830-dma.h> |
| 5 |
|
| 6 |
/ { |
| 7 |
#address-cells = <1>; |
| 8 |
#size-cells = <1>; |
| 9 |
compatible = "ingenic,x1830"; |
| 10 |
|
| 11 |
cpus { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <0>; |
| 14 |
|
| 15 |
cpu0: cpu@0 { |
| 16 |
device_type = "cpu"; |
| 17 |
compatible = "ingenic,xburst-fpu2.0-mxu2.0"; |
| 18 |
reg = <0>; |
| 19 |
|
| 20 |
clocks = <&cgu X1830_CLK_CPU>; |
| 21 |
clock-names = "cpu"; |
| 22 |
}; |
| 23 |
}; |
| 24 |
|
| 25 |
cpuintc: interrupt-controller { |
| 26 |
#address-cells = <0>; |
| 27 |
#interrupt-cells = <1>; |
| 28 |
interrupt-controller; |
| 29 |
compatible = "mti,cpu-interrupt-controller"; |
| 30 |
}; |
| 31 |
|
| 32 |
intc: interrupt-controller@10001000 { |
| 33 |
compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc"; |
| 34 |
reg = <0x10001000 0x50>; |
| 35 |
|
| 36 |
interrupt-controller; |
| 37 |
#interrupt-cells = <1>; |
| 38 |
|
| 39 |
interrupt-parent = <&cpuintc>; |
| 40 |
interrupts = <2>; |
| 41 |
}; |
| 42 |
|
| 43 |
exclk: ext { |
| 44 |
compatible = "fixed-clock"; |
| 45 |
#clock-cells = <0>; |
| 46 |
}; |
| 47 |
|
| 48 |
rtclk: rtc { |
| 49 |
compatible = "fixed-clock"; |
| 50 |
#clock-cells = <0>; |
| 51 |
clock-frequency = <32768>; |
| 52 |
}; |
| 53 |
|
| 54 |
cgu: x1830-cgu@10000000 { |
| 55 |
compatible = "ingenic,x1830-cgu", "simple-mfd"; |
| 56 |
reg = <0x10000000 0x100>; |
| 57 |
#address-cells = <1>; |
| 58 |
#size-cells = <1>; |
| 59 |
ranges = <0x0 0x10000000 0x100>; |
| 60 |
|
| 61 |
#clock-cells = <1>; |
| 62 |
|
| 63 |
clocks = <&exclk>, <&rtclk>; |
| 64 |
clock-names = "ext", "rtc"; |
| 65 |
|
| 66 |
otg_phy: usb-phy@3c { |
| 67 |
compatible = "ingenic,x1830-phy"; |
| 68 |
reg = <0x3c 0x10>; |
| 69 |
|
| 70 |
clocks = <&cgu X1830_CLK_OTGPHY>; |
| 71 |
|
| 72 |
#phy-cells = <0>; |
| 73 |
|
| 74 |
status = "disabled"; |
| 75 |
}; |
| 76 |
|
| 77 |
mac_phy_ctrl: mac-phy-ctrl@e8 { |
| 78 |
compatible = "syscon"; |
| 79 |
reg = <0xe8 0x4>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
|
| 83 |
ost: timer@12000000 { |
| 84 |
compatible = "ingenic,x1830-ost", "ingenic,x1000-ost"; |
| 85 |
reg = <0x12000000 0x3c>; |
| 86 |
|
| 87 |
#clock-cells = <1>; |
| 88 |
|
| 89 |
clocks = <&cgu X1830_CLK_OST>; |
| 90 |
clock-names = "ost"; |
| 91 |
|
| 92 |
interrupt-parent = <&cpuintc>; |
| 93 |
interrupts = <4>; |
| 94 |
}; |
| 95 |
|
| 96 |
tcu: timer@10002000 { |
| 97 |
compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd"; |
| 98 |
reg = <0x10002000 0x1000>; |
| 99 |
#address-cells = <1>; |
| 100 |
#size-cells = <1>; |
| 101 |
ranges = <0x0 0x10002000 0x1000>; |
| 102 |
|
| 103 |
#clock-cells = <1>; |
| 104 |
|
| 105 |
clocks = <&cgu X1830_CLK_RTCLK>, |
| 106 |
<&cgu X1830_CLK_EXCLK>, |
| 107 |
<&cgu X1830_CLK_PCLK>, |
| 108 |
<&cgu X1830_CLK_TCU>; |
| 109 |
clock-names = "rtc", "ext", "pclk", "tcu"; |
| 110 |
|
| 111 |
interrupt-controller; |
| 112 |
#interrupt-cells = <1>; |
| 113 |
|
| 114 |
interrupt-parent = <&intc>; |
| 115 |
interrupts = <27 26 25>; |
| 116 |
|
| 117 |
wdt: watchdog@0 { |
| 118 |
compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog"; |
| 119 |
reg = <0x0 0x10>; |
| 120 |
|
| 121 |
clocks = <&tcu TCU_CLK_WDT>; |
| 122 |
clock-names = "wdt"; |
| 123 |
}; |
| 124 |
|
| 125 |
pwm: pwm@40 { |
| 126 |
compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm"; |
| 127 |
reg = <0x40 0x80>; |
| 128 |
|
| 129 |
#pwm-cells = <3>; |
| 130 |
|
| 131 |
clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, |
| 132 |
<&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, |
| 133 |
<&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, |
| 134 |
<&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; |
| 135 |
clock-names = "timer0", "timer1", "timer2", "timer3", |
| 136 |
"timer4", "timer5", "timer6", "timer7"; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
rtc: rtc@10003000 { |
| 141 |
compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc"; |
| 142 |
reg = <0x10003000 0x4c>; |
| 143 |
|
| 144 |
interrupt-parent = <&intc>; |
| 145 |
interrupts = <32>; |
| 146 |
|
| 147 |
clocks = <&cgu X1830_CLK_RTCLK>; |
| 148 |
clock-names = "rtc"; |
| 149 |
}; |
| 150 |
|
| 151 |
pinctrl: pin-controller@10010000 { |
| 152 |
compatible = "ingenic,x1830-pinctrl"; |
| 153 |
reg = <0x10010000 0x800>; |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <0>; |
| 156 |
|
| 157 |
gpa: gpio@0 { |
| 158 |
compatible = "ingenic,x1830-gpio"; |
| 159 |
reg = <0>; |
| 160 |
|
| 161 |
gpio-controller; |
| 162 |
gpio-ranges = <&pinctrl 0 0 32>; |
| 163 |
#gpio-cells = <2>; |
| 164 |
|
| 165 |
interrupt-controller; |
| 166 |
#interrupt-cells = <2>; |
| 167 |
|
| 168 |
interrupt-parent = <&intc>; |
| 169 |
interrupts = <17>; |
| 170 |
}; |
| 171 |
|
| 172 |
gpb: gpio@1 { |
| 173 |
compatible = "ingenic,x1830-gpio"; |
| 174 |
reg = <1>; |
| 175 |
|
| 176 |
gpio-controller; |
| 177 |
gpio-ranges = <&pinctrl 0 32 32>; |
| 178 |
#gpio-cells = <2>; |
| 179 |
|
| 180 |
interrupt-controller; |
| 181 |
#interrupt-cells = <2>; |
| 182 |
|
| 183 |
interrupt-parent = <&intc>; |
| 184 |
interrupts = <16>; |
| 185 |
}; |
| 186 |
|
| 187 |
gpc: gpio@2 { |
| 188 |
compatible = "ingenic,x1830-gpio"; |
| 189 |
reg = <2>; |
| 190 |
|
| 191 |
gpio-controller; |
| 192 |
gpio-ranges = <&pinctrl 0 64 32>; |
| 193 |
#gpio-cells = <2>; |
| 194 |
|
| 195 |
interrupt-controller; |
| 196 |
#interrupt-cells = <2>; |
| 197 |
|
| 198 |
interrupt-parent = <&intc>; |
| 199 |
interrupts = <15>; |
| 200 |
}; |
| 201 |
|
| 202 |
gpd: gpio@3 { |
| 203 |
compatible = "ingenic,x1830-gpio"; |
| 204 |
reg = <3>; |
| 205 |
|
| 206 |
gpio-controller; |
| 207 |
gpio-ranges = <&pinctrl 0 96 32>; |
| 208 |
#gpio-cells = <2>; |
| 209 |
|
| 210 |
interrupt-controller; |
| 211 |
#interrupt-cells = <2>; |
| 212 |
|
| 213 |
interrupt-parent = <&intc>; |
| 214 |
interrupts = <14>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
uart0: serial@10030000 { |
| 219 |
compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; |
| 220 |
reg = <0x10030000 0x100>; |
| 221 |
|
| 222 |
interrupt-parent = <&intc>; |
| 223 |
interrupts = <51>; |
| 224 |
|
| 225 |
clocks = <&exclk>, <&cgu X1830_CLK_UART0>; |
| 226 |
clock-names = "baud", "module"; |
| 227 |
|
| 228 |
status = "disabled"; |
| 229 |
}; |
| 230 |
|
| 231 |
uart1: serial@10031000 { |
| 232 |
compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; |
| 233 |
reg = <0x10031000 0x100>; |
| 234 |
|
| 235 |
interrupt-parent = <&intc>; |
| 236 |
interrupts = <50>; |
| 237 |
|
| 238 |
clocks = <&exclk>, <&cgu X1830_CLK_UART1>; |
| 239 |
clock-names = "baud", "module"; |
| 240 |
|
| 241 |
status = "disabled"; |
| 242 |
}; |
| 243 |
|
| 244 |
ssi0: spi@10043000 { |
| 245 |
compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; |
| 246 |
reg = <0x10043000 0x20>; |
| 247 |
#address-cells = <1>; |
| 248 |
#size-cells = <0>; |
| 249 |
|
| 250 |
interrupt-parent = <&intc>; |
| 251 |
interrupts = <9>; |
| 252 |
|
| 253 |
clocks = <&cgu X1830_CLK_SSI0>; |
| 254 |
clock-names = "spi"; |
| 255 |
|
| 256 |
dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, |
| 257 |
<&pdma X1830_DMA_SSI0_TX 0xffffffff>; |
| 258 |
dma-names = "rx", "tx"; |
| 259 |
|
| 260 |
status = "disabled"; |
| 261 |
}; |
| 262 |
|
| 263 |
ssi1: spi@10044000 { |
| 264 |
compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; |
| 265 |
reg = <0x10044000 0x20>; |
| 266 |
#address-cells = <1>; |
| 267 |
#size-cells = <0>; |
| 268 |
|
| 269 |
interrupt-parent = <&intc>; |
| 270 |
interrupts = <8>; |
| 271 |
|
| 272 |
clocks = <&cgu X1830_CLK_SSI1>; |
| 273 |
clock-names = "spi"; |
| 274 |
|
| 275 |
dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, |
| 276 |
<&pdma X1830_DMA_SSI1_TX 0xffffffff>; |
| 277 |
dma-names = "rx", "tx"; |
| 278 |
|
| 279 |
status = "disabled"; |
| 280 |
}; |
| 281 |
|
| 282 |
i2c0: i2c-controller@10050000 { |
| 283 |
compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| 284 |
reg = <0x10050000 0x1000>; |
| 285 |
#address-cells = <1>; |
| 286 |
#size-cells = <0>; |
| 287 |
|
| 288 |
interrupt-parent = <&intc>; |
| 289 |
interrupts = <60>; |
| 290 |
|
| 291 |
clocks = <&cgu X1830_CLK_SMB0>; |
| 292 |
|
| 293 |
status = "disabled"; |
| 294 |
}; |
| 295 |
|
| 296 |
i2c1: i2c-controller@10051000 { |
| 297 |
compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| 298 |
reg = <0x10051000 0x1000>; |
| 299 |
#address-cells = <1>; |
| 300 |
#size-cells = <0>; |
| 301 |
|
| 302 |
interrupt-parent = <&intc>; |
| 303 |
interrupts = <59>; |
| 304 |
|
| 305 |
clocks = <&cgu X1830_CLK_SMB1>; |
| 306 |
|
| 307 |
status = "disabled"; |
| 308 |
}; |
| 309 |
|
| 310 |
i2c2: i2c-controller@10052000 { |
| 311 |
compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; |
| 312 |
reg = <0x10052000 0x1000>; |
| 313 |
#address-cells = <1>; |
| 314 |
#size-cells = <0>; |
| 315 |
|
| 316 |
interrupt-parent = <&intc>; |
| 317 |
interrupts = <58>; |
| 318 |
|
| 319 |
clocks = <&cgu X1830_CLK_SMB2>; |
| 320 |
|
| 321 |
status = "disabled"; |
| 322 |
}; |
| 323 |
|
| 324 |
dtrng: trng@10072000 { |
| 325 |
compatible = "ingenic,x1830-dtrng"; |
| 326 |
reg = <0x10072000 0xc>; |
| 327 |
|
| 328 |
clocks = <&cgu X1830_CLK_DTRNG>; |
| 329 |
|
| 330 |
status = "disabled"; |
| 331 |
}; |
| 332 |
|
| 333 |
pdma: dma-controller@13420000 { |
| 334 |
compatible = "ingenic,x1830-dma"; |
| 335 |
reg = <0x13420000 0x400>, <0x13421000 0x40>; |
| 336 |
|
| 337 |
#dma-cells = <2>; |
| 338 |
|
| 339 |
interrupt-parent = <&intc>; |
| 340 |
interrupts = <10>; |
| 341 |
|
| 342 |
clocks = <&cgu X1830_CLK_PDMA>; |
| 343 |
}; |
| 344 |
|
| 345 |
msc0: mmc@13450000 { |
| 346 |
compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; |
| 347 |
reg = <0x13450000 0x1000>; |
| 348 |
|
| 349 |
interrupt-parent = <&intc>; |
| 350 |
interrupts = <37>; |
| 351 |
|
| 352 |
clocks = <&cgu X1830_CLK_MSC0>; |
| 353 |
clock-names = "mmc"; |
| 354 |
|
| 355 |
cap-sd-highspeed; |
| 356 |
cap-mmc-highspeed; |
| 357 |
cap-sdio-irq; |
| 358 |
|
| 359 |
dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>, |
| 360 |
<&pdma X1830_DMA_MSC0_TX 0xffffffff>; |
| 361 |
dma-names = "rx", "tx"; |
| 362 |
|
| 363 |
status = "disabled"; |
| 364 |
}; |
| 365 |
|
| 366 |
msc1: mmc@13460000 { |
| 367 |
compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; |
| 368 |
reg = <0x13460000 0x1000>; |
| 369 |
|
| 370 |
interrupt-parent = <&intc>; |
| 371 |
interrupts = <36>; |
| 372 |
|
| 373 |
clocks = <&cgu X1830_CLK_MSC1>; |
| 374 |
clock-names = "mmc"; |
| 375 |
|
| 376 |
cap-sd-highspeed; |
| 377 |
cap-mmc-highspeed; |
| 378 |
cap-sdio-irq; |
| 379 |
|
| 380 |
dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>, |
| 381 |
<&pdma X1830_DMA_MSC1_TX 0xffffffff>; |
| 382 |
dma-names = "rx", "tx"; |
| 383 |
|
| 384 |
status = "disabled"; |
| 385 |
}; |
| 386 |
|
| 387 |
mac: ethernet@134b0000 { |
| 388 |
compatible = "ingenic,x1830-mac", "snps,dwmac"; |
| 389 |
reg = <0x134b0000 0x2000>; |
| 390 |
|
| 391 |
interrupt-parent = <&intc>; |
| 392 |
interrupts = <55>; |
| 393 |
interrupt-names = "macirq"; |
| 394 |
|
| 395 |
clocks = <&cgu X1830_CLK_MAC>; |
| 396 |
clock-names = "stmmaceth"; |
| 397 |
|
| 398 |
mode-reg = <&mac_phy_ctrl>; |
| 399 |
|
| 400 |
status = "disabled"; |
| 401 |
|
| 402 |
mdio: mdio { |
| 403 |
compatible = "snps,dwmac-mdio"; |
| 404 |
#address-cells = <1>; |
| 405 |
#size-cells = <0>; |
| 406 |
|
| 407 |
status = "disabled"; |
| 408 |
}; |
| 409 |
}; |
| 410 |
|
| 411 |
otg: usb@13500000 { |
| 412 |
compatible = "ingenic,x1830-otg"; |
| 413 |
reg = <0x13500000 0x40000>; |
| 414 |
|
| 415 |
interrupt-parent = <&intc>; |
| 416 |
interrupts = <21>; |
| 417 |
|
| 418 |
clocks = <&cgu X1830_CLK_OTG>; |
| 419 |
clock-names = "otg"; |
| 420 |
|
| 421 |
phys = <&otg_phy>; |
| 422 |
phy-names = "usb2-phy"; |
| 423 |
|
| 424 |
g-rx-fifo-size = <768>; |
| 425 |
g-np-tx-fifo-size = <256>; |
| 426 |
g-tx-fifo-size = <256 256 256 256 256 256 256 512>; |
| 427 |
|
| 428 |
status = "disabled"; |
| 429 |
}; |
| 430 |
}; |