| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/input/input.h> |
| 3 |
#include <dt-bindings/thermal/thermal.h> |
| 4 |
#include "tegra30.dtsi" |
| 5 |
#include "tegra30-cpu-opp.dtsi" |
| 6 |
#include "tegra30-cpu-opp-microvolt.dtsi" |
| 7 |
|
| 8 |
/** |
| 9 |
* This file contains common DT entry for all fab version of Cardhu. |
| 10 |
* There is multiple fab version of Cardhu starting from A01 to A07. |
| 11 |
* Cardhu fab version A01 and A03 are not supported. Cardhu fab version |
| 12 |
* A02 will have different sets of GPIOs for fixed regulator compare to |
| 13 |
* Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are |
| 14 |
* compatible with fab version A04. Based on Cardhu fab version, the |
| 15 |
* related dts file need to be chosen like for Cardhu fab version A02, |
| 16 |
* use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use |
| 17 |
* tegra30-cardhu-a04.dts. |
| 18 |
* The identification of board is done in two ways, by looking the sticker |
| 19 |
* on PCB and by reading board id eeprom. |
| 20 |
* The sticker will have number like 600-81291-1000-002 C.3. In this 4th |
| 21 |
* number is the fab version like here it is 002 and hence fab version A02. |
| 22 |
* The (downstream internal) U-Boot of Cardhu display the board-id as |
| 23 |
* follows: |
| 24 |
* BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00 |
| 25 |
* In this Fab version is 02 i.e. A02. |
| 26 |
* The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56). |
| 27 |
* The location 0x8 of this eeprom contains the Fab version. It is 1 byte |
| 28 |
* wide. |
| 29 |
*/ |
| 30 |
|
| 31 |
/ { |
| 32 |
model = "NVIDIA Tegra30 Cardhu evaluation board"; |
| 33 |
compatible = "nvidia,cardhu", "nvidia,tegra30"; |
| 34 |
|
| 35 |
aliases { |
| 36 |
rtc0 = "/i2c@7000d000/tps65911@2d"; |
| 37 |
rtc1 = "/rtc@7000e000"; |
| 38 |
serial0 = &uarta; |
| 39 |
serial1 = &uartc; |
| 40 |
}; |
| 41 |
|
| 42 |
chosen { |
| 43 |
stdout-path = "serial0:115200n8"; |
| 44 |
}; |
| 45 |
|
| 46 |
memory@80000000 { |
| 47 |
reg = <0x80000000 0x40000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
pcie@3000 { |
| 51 |
status = "okay"; |
| 52 |
|
| 53 |
/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ |
| 54 |
avdd-pexb-supply = <&ldo1_reg>; |
| 55 |
vdd-pexb-supply = <&ldo1_reg>; |
| 56 |
avdd-pex-pll-supply = <&ldo1_reg>; |
| 57 |
hvdd-pex-supply = <&pex_hvdd_3v3_reg>; |
| 58 |
vddio-pex-ctl-supply = <&sys_3v3_reg>; |
| 59 |
avdd-plle-supply = <&ldo2_reg>; |
| 60 |
|
| 61 |
pci@1,0 { |
| 62 |
nvidia,num-lanes = <4>; |
| 63 |
}; |
| 64 |
|
| 65 |
pci@2,0 { |
| 66 |
nvidia,num-lanes = <1>; |
| 67 |
}; |
| 68 |
|
| 69 |
pci@3,0 { |
| 70 |
status = "okay"; |
| 71 |
nvidia,num-lanes = <1>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
host1x@50000000 { |
| 76 |
dc@54200000 { |
| 77 |
rgb { |
| 78 |
status = "okay"; |
| 79 |
|
| 80 |
nvidia,panel = <&panel>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
pinmux@70000868 { |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&state_default>; |
| 88 |
|
| 89 |
state_default: pinmux { |
| 90 |
sdmmc1_clk_pz0 { |
| 91 |
nvidia,pins = "sdmmc1_clk_pz0"; |
| 92 |
nvidia,function = "sdmmc1"; |
| 93 |
nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 94 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 95 |
}; |
| 96 |
sdmmc1_cmd_pz1 { |
| 97 |
nvidia,pins = "sdmmc1_cmd_pz1", |
| 98 |
"sdmmc1_dat0_py7", |
| 99 |
"sdmmc1_dat1_py6", |
| 100 |
"sdmmc1_dat2_py5", |
| 101 |
"sdmmc1_dat3_py4"; |
| 102 |
nvidia,function = "sdmmc1"; |
| 103 |
nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 104 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 105 |
}; |
| 106 |
sdmmc3_clk_pa6 { |
| 107 |
nvidia,pins = "sdmmc3_clk_pa6"; |
| 108 |
nvidia,function = "sdmmc3"; |
| 109 |
nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 110 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 111 |
}; |
| 112 |
sdmmc3_cmd_pa7 { |
| 113 |
nvidia,pins = "sdmmc3_cmd_pa7", |
| 114 |
"sdmmc3_dat0_pb7", |
| 115 |
"sdmmc3_dat1_pb6", |
| 116 |
"sdmmc3_dat2_pb5", |
| 117 |
"sdmmc3_dat3_pb4"; |
| 118 |
nvidia,function = "sdmmc3"; |
| 119 |
nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 120 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 121 |
}; |
| 122 |
sdmmc4_clk_pcc4 { |
| 123 |
nvidia,pins = "sdmmc4_clk_pcc4", |
| 124 |
"sdmmc4_rst_n_pcc3"; |
| 125 |
nvidia,function = "sdmmc4"; |
| 126 |
nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 127 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 128 |
}; |
| 129 |
sdmmc4_dat0_paa0 { |
| 130 |
nvidia,pins = "sdmmc4_dat0_paa0", |
| 131 |
"sdmmc4_dat1_paa1", |
| 132 |
"sdmmc4_dat2_paa2", |
| 133 |
"sdmmc4_dat3_paa3", |
| 134 |
"sdmmc4_dat4_paa4", |
| 135 |
"sdmmc4_dat5_paa5", |
| 136 |
"sdmmc4_dat6_paa6", |
| 137 |
"sdmmc4_dat7_paa7"; |
| 138 |
nvidia,function = "sdmmc4"; |
| 139 |
nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 140 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 141 |
}; |
| 142 |
dap2_fs_pa2 { |
| 143 |
nvidia,pins = "dap2_fs_pa2", |
| 144 |
"dap2_sclk_pa3", |
| 145 |
"dap2_din_pa4", |
| 146 |
"dap2_dout_pa5"; |
| 147 |
nvidia,function = "i2s1"; |
| 148 |
nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 149 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 150 |
}; |
| 151 |
sdio3 { |
| 152 |
nvidia,pins = "drive_sdio3"; |
| 153 |
nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; |
| 154 |
nvidia,schmitt = <TEGRA_PIN_DISABLE>; |
| 155 |
nvidia,pull-down-strength = <46>; |
| 156 |
nvidia,pull-up-strength = <42>; |
| 157 |
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>; |
| 158 |
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>; |
| 159 |
}; |
| 160 |
uart3_txd_pw6 { |
| 161 |
nvidia,pins = "uart3_txd_pw6", |
| 162 |
"uart3_cts_n_pa1", |
| 163 |
"uart3_rts_n_pc0", |
| 164 |
"uart3_rxd_pw7"; |
| 165 |
nvidia,function = "uartc"; |
| 166 |
nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 167 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
serial@70006000 { |
| 173 |
/delete-property/ dmas; |
| 174 |
/delete-property/ dma-names; |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
serial@70006200 { |
| 179 |
compatible = "nvidia,tegra30-hsuart"; |
| 180 |
reset-names = "serial"; |
| 181 |
/delete-property/ reg-shift; |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
pwm@7000a000 { |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
panelddc: i2c@7000c000 { |
| 190 |
status = "okay"; |
| 191 |
clock-frequency = <100000>; |
| 192 |
}; |
| 193 |
|
| 194 |
i2c@7000c400 { |
| 195 |
status = "okay"; |
| 196 |
clock-frequency = <100000>; |
| 197 |
}; |
| 198 |
|
| 199 |
i2c@7000c500 { |
| 200 |
status = "okay"; |
| 201 |
clock-frequency = <100000>; |
| 202 |
|
| 203 |
/* ALS and Proximity sensor */ |
| 204 |
isl29028@44 { |
| 205 |
compatible = "isil,isl29028"; |
| 206 |
reg = <0x44>; |
| 207 |
interrupt-parent = <&gpio>; |
| 208 |
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>; |
| 209 |
}; |
| 210 |
|
| 211 |
i2cmux@70 { |
| 212 |
compatible = "nxp,pca9546"; |
| 213 |
#address-cells = <1>; |
| 214 |
#size-cells = <0>; |
| 215 |
reg = <0x70>; |
| 216 |
reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
i2c@7000c700 { |
| 221 |
status = "okay"; |
| 222 |
clock-frequency = <100000>; |
| 223 |
}; |
| 224 |
|
| 225 |
i2c@7000d000 { |
| 226 |
status = "okay"; |
| 227 |
clock-frequency = <100000>; |
| 228 |
|
| 229 |
wm8903: wm8903@1a { |
| 230 |
compatible = "wlf,wm8903"; |
| 231 |
reg = <0x1a>; |
| 232 |
interrupt-parent = <&gpio>; |
| 233 |
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; |
| 234 |
|
| 235 |
gpio-controller; |
| 236 |
#gpio-cells = <2>; |
| 237 |
|
| 238 |
micdet-cfg = <0>; |
| 239 |
micdet-delay = <100>; |
| 240 |
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; |
| 241 |
}; |
| 242 |
|
| 243 |
pmic: tps65911@2d { |
| 244 |
compatible = "ti,tps65911"; |
| 245 |
reg = <0x2d>; |
| 246 |
|
| 247 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 248 |
#interrupt-cells = <2>; |
| 249 |
interrupt-controller; |
| 250 |
wakeup-source; |
| 251 |
|
| 252 |
ti,system-power-controller; |
| 253 |
|
| 254 |
#gpio-cells = <2>; |
| 255 |
gpio-controller; |
| 256 |
|
| 257 |
vcc1-supply = <&vdd_ac_bat_reg>; |
| 258 |
vcc2-supply = <&vdd_ac_bat_reg>; |
| 259 |
vcc3-supply = <&vio_reg>; |
| 260 |
vcc4-supply = <&vdd_5v0_reg>; |
| 261 |
vcc5-supply = <&vdd_ac_bat_reg>; |
| 262 |
vcc6-supply = <&vdd2_reg>; |
| 263 |
vcc7-supply = <&vdd_ac_bat_reg>; |
| 264 |
vccio-supply = <&vdd_ac_bat_reg>; |
| 265 |
|
| 266 |
regulators { |
| 267 |
vdd1_reg: vdd1 { |
| 268 |
regulator-name = "vddio_ddr_1v2"; |
| 269 |
regulator-min-microvolt = <1200000>; |
| 270 |
regulator-max-microvolt = <1200000>; |
| 271 |
regulator-always-on; |
| 272 |
}; |
| 273 |
|
| 274 |
vdd2_reg: vdd2 { |
| 275 |
regulator-name = "vdd_1v5_gen"; |
| 276 |
regulator-min-microvolt = <1500000>; |
| 277 |
regulator-max-microvolt = <1500000>; |
| 278 |
regulator-always-on; |
| 279 |
}; |
| 280 |
|
| 281 |
vddctrl_reg: vddctrl { |
| 282 |
regulator-name = "vdd_cpu,vdd_sys"; |
| 283 |
regulator-min-microvolt = <800000>; |
| 284 |
regulator-max-microvolt = <1250000>; |
| 285 |
regulator-coupled-with = <&vdd_core>; |
| 286 |
regulator-coupled-max-spread = <300000>; |
| 287 |
regulator-max-step-microvolt = <100000>; |
| 288 |
regulator-always-on; |
| 289 |
|
| 290 |
nvidia,tegra-cpu-regulator; |
| 291 |
}; |
| 292 |
|
| 293 |
vio_reg: vio { |
| 294 |
regulator-name = "vdd_1v8_gen"; |
| 295 |
regulator-min-microvolt = <1800000>; |
| 296 |
regulator-max-microvolt = <1800000>; |
| 297 |
regulator-always-on; |
| 298 |
}; |
| 299 |
|
| 300 |
ldo1_reg: ldo1 { |
| 301 |
regulator-name = "vdd_pexa,vdd_pexb"; |
| 302 |
regulator-min-microvolt = <1050000>; |
| 303 |
regulator-max-microvolt = <1050000>; |
| 304 |
}; |
| 305 |
|
| 306 |
ldo2_reg: ldo2 { |
| 307 |
regulator-name = "vdd_sata,avdd_plle"; |
| 308 |
regulator-min-microvolt = <1050000>; |
| 309 |
regulator-max-microvolt = <1050000>; |
| 310 |
}; |
| 311 |
|
| 312 |
/* LDO3 is not connected to anything */ |
| 313 |
|
| 314 |
ldo4_reg: ldo4 { |
| 315 |
regulator-name = "vdd_rtc"; |
| 316 |
regulator-min-microvolt = <1200000>; |
| 317 |
regulator-max-microvolt = <1200000>; |
| 318 |
regulator-always-on; |
| 319 |
}; |
| 320 |
|
| 321 |
ldo5_reg: ldo5 { |
| 322 |
regulator-name = "vddio_sdmmc,avdd_vdac"; |
| 323 |
regulator-min-microvolt = <3300000>; |
| 324 |
regulator-max-microvolt = <3300000>; |
| 325 |
regulator-always-on; |
| 326 |
}; |
| 327 |
|
| 328 |
ldo6_reg: ldo6 { |
| 329 |
regulator-name = "avdd_dsi_csi,pwrdet_mipi"; |
| 330 |
regulator-min-microvolt = <1200000>; |
| 331 |
regulator-max-microvolt = <1200000>; |
| 332 |
}; |
| 333 |
|
| 334 |
ldo7_reg: ldo7 { |
| 335 |
regulator-name = "vdd_pllm,x,u,a_p_c_s"; |
| 336 |
regulator-min-microvolt = <1200000>; |
| 337 |
regulator-max-microvolt = <1200000>; |
| 338 |
regulator-always-on; |
| 339 |
}; |
| 340 |
|
| 341 |
ldo8_reg: ldo8 { |
| 342 |
regulator-name = "vdd_ddr_hs"; |
| 343 |
regulator-min-microvolt = <1000000>; |
| 344 |
regulator-max-microvolt = <1000000>; |
| 345 |
regulator-always-on; |
| 346 |
}; |
| 347 |
}; |
| 348 |
}; |
| 349 |
|
| 350 |
nct1008: temperature-sensor@4c { |
| 351 |
compatible = "onnn,nct1008"; |
| 352 |
reg = <0x4c>; |
| 353 |
vcc-supply = <&sys_3v3_reg>; |
| 354 |
interrupt-parent = <&gpio>; |
| 355 |
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>; |
| 356 |
#thermal-sensor-cells = <1>; |
| 357 |
}; |
| 358 |
|
| 359 |
vdd_core: tps62361@60 { |
| 360 |
compatible = "ti,tps62361"; |
| 361 |
reg = <0x60>; |
| 362 |
|
| 363 |
regulator-name = "tps62361-vout"; |
| 364 |
regulator-min-microvolt = <500000>; |
| 365 |
regulator-max-microvolt = <1500000>; |
| 366 |
regulator-coupled-with = <&vddctrl_reg>; |
| 367 |
regulator-coupled-max-spread = <300000>; |
| 368 |
regulator-max-step-microvolt = <100000>; |
| 369 |
regulator-boot-on; |
| 370 |
regulator-always-on; |
| 371 |
ti,vsel0-state-high; |
| 372 |
ti,vsel1-state-high; |
| 373 |
|
| 374 |
nvidia,tegra-core-regulator; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
spi@7000da00 { |
| 379 |
status = "okay"; |
| 380 |
spi-max-frequency = <25000000>; |
| 381 |
|
| 382 |
flash@1 { |
| 383 |
compatible = "winbond,w25q32", "jedec,spi-nor"; |
| 384 |
reg = <1>; |
| 385 |
spi-max-frequency = <20000000>; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
pmc@7000e400 { |
| 390 |
status = "okay"; |
| 391 |
nvidia,invert-interrupt; |
| 392 |
nvidia,suspend-mode = <1>; |
| 393 |
nvidia,cpu-pwr-good-time = <2000>; |
| 394 |
nvidia,cpu-pwr-off-time = <200>; |
| 395 |
nvidia,core-pwr-good-time = <3845 3845>; |
| 396 |
nvidia,core-pwr-off-time = <0>; |
| 397 |
nvidia,core-power-req-active-high; |
| 398 |
nvidia,sys-clock-req-active-high; |
| 399 |
core-supply = <&vdd_core>; |
| 400 |
}; |
| 401 |
|
| 402 |
ahub@70080000 { |
| 403 |
i2s@70080400 { |
| 404 |
status = "okay"; |
| 405 |
}; |
| 406 |
}; |
| 407 |
|
| 408 |
mmc@78000000 { |
| 409 |
status = "okay"; |
| 410 |
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; |
| 411 |
wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; |
| 412 |
power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; |
| 413 |
bus-width = <4>; |
| 414 |
}; |
| 415 |
|
| 416 |
mmc@78000600 { |
| 417 |
status = "okay"; |
| 418 |
bus-width = <8>; |
| 419 |
non-removable; |
| 420 |
}; |
| 421 |
|
| 422 |
usb@7d008000 { |
| 423 |
status = "okay"; |
| 424 |
}; |
| 425 |
|
| 426 |
usb-phy@7d008000 { |
| 427 |
vbus-supply = <&usb3_vbus_reg>; |
| 428 |
status = "okay"; |
| 429 |
}; |
| 430 |
|
| 431 |
backlight: backlight { |
| 432 |
compatible = "pwm-backlight"; |
| 433 |
|
| 434 |
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; |
| 435 |
power-supply = <&vdd_bl_reg>; |
| 436 |
pwms = <&pwm 0 5000000>; |
| 437 |
|
| 438 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 439 |
default-brightness-level = <6>; |
| 440 |
}; |
| 441 |
|
| 442 |
clk32k_in: clock-32k { |
| 443 |
compatible = "fixed-clock"; |
| 444 |
clock-frequency = <32768>; |
| 445 |
#clock-cells = <0>; |
| 446 |
}; |
| 447 |
|
| 448 |
cpus { |
| 449 |
cpu0: cpu@0 { |
| 450 |
cpu-supply = <&vddctrl_reg>; |
| 451 |
operating-points-v2 = <&cpu0_opp_table>; |
| 452 |
#cooling-cells = <2>; |
| 453 |
}; |
| 454 |
|
| 455 |
cpu1: cpu@1 { |
| 456 |
cpu-supply = <&vddctrl_reg>; |
| 457 |
operating-points-v2 = <&cpu0_opp_table>; |
| 458 |
#cooling-cells = <2>; |
| 459 |
}; |
| 460 |
|
| 461 |
cpu2: cpu@2 { |
| 462 |
cpu-supply = <&vddctrl_reg>; |
| 463 |
operating-points-v2 = <&cpu0_opp_table>; |
| 464 |
#cooling-cells = <2>; |
| 465 |
}; |
| 466 |
|
| 467 |
cpu3: cpu@3 { |
| 468 |
cpu-supply = <&vddctrl_reg>; |
| 469 |
operating-points-v2 = <&cpu0_opp_table>; |
| 470 |
#cooling-cells = <2>; |
| 471 |
}; |
| 472 |
}; |
| 473 |
|
| 474 |
gpio-keys { |
| 475 |
compatible = "gpio-keys"; |
| 476 |
|
| 477 |
key-power { |
| 478 |
label = "Power"; |
| 479 |
interrupt-parent = <&pmic>; |
| 480 |
interrupts = <2 0>; |
| 481 |
linux,code = <KEY_POWER>; |
| 482 |
debounce-interval = <100>; |
| 483 |
wakeup-source; |
| 484 |
}; |
| 485 |
|
| 486 |
key-volume-down { |
| 487 |
label = "Volume Down"; |
| 488 |
gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; |
| 489 |
linux,code = <KEY_VOLUMEDOWN>; |
| 490 |
debounce-interval = <10>; |
| 491 |
}; |
| 492 |
|
| 493 |
key-volume-up { |
| 494 |
label = "Volume Up"; |
| 495 |
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; |
| 496 |
linux,code = <KEY_VOLUMEUP>; |
| 497 |
debounce-interval = <10>; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
panel: panel { |
| 502 |
compatible = "chunghwa,claa101wb01"; |
| 503 |
ddc-i2c-bus = <&panelddc>; |
| 504 |
|
| 505 |
power-supply = <&vdd_pnl1_reg>; |
| 506 |
enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>; |
| 507 |
|
| 508 |
backlight = <&backlight>; |
| 509 |
}; |
| 510 |
|
| 511 |
vdd_ac_bat_reg: regulator-acbat { |
| 512 |
compatible = "regulator-fixed"; |
| 513 |
regulator-name = "vdd_ac_bat"; |
| 514 |
regulator-min-microvolt = <5000000>; |
| 515 |
regulator-max-microvolt = <5000000>; |
| 516 |
regulator-always-on; |
| 517 |
}; |
| 518 |
|
| 519 |
cam_1v8_reg: regulator-cam { |
| 520 |
compatible = "regulator-fixed"; |
| 521 |
regulator-name = "cam_1v8"; |
| 522 |
regulator-min-microvolt = <1800000>; |
| 523 |
regulator-max-microvolt = <1800000>; |
| 524 |
enable-active-high; |
| 525 |
gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; |
| 526 |
vin-supply = <&vio_reg>; |
| 527 |
}; |
| 528 |
|
| 529 |
cp_5v_reg: regulator-5v0cp { |
| 530 |
compatible = "regulator-fixed"; |
| 531 |
regulator-name = "cp_5v"; |
| 532 |
regulator-min-microvolt = <5000000>; |
| 533 |
regulator-max-microvolt = <5000000>; |
| 534 |
regulator-boot-on; |
| 535 |
regulator-always-on; |
| 536 |
enable-active-high; |
| 537 |
gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; |
| 538 |
}; |
| 539 |
|
| 540 |
emmc_3v3_reg: regulator-emmc { |
| 541 |
compatible = "regulator-fixed"; |
| 542 |
regulator-name = "emmc_3v3"; |
| 543 |
regulator-min-microvolt = <3300000>; |
| 544 |
regulator-max-microvolt = <3300000>; |
| 545 |
regulator-always-on; |
| 546 |
regulator-boot-on; |
| 547 |
enable-active-high; |
| 548 |
gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; |
| 549 |
vin-supply = <&sys_3v3_reg>; |
| 550 |
}; |
| 551 |
|
| 552 |
modem_3v3_reg: regulator-modem { |
| 553 |
compatible = "regulator-fixed"; |
| 554 |
regulator-name = "modem_3v3"; |
| 555 |
regulator-min-microvolt = <3300000>; |
| 556 |
regulator-max-microvolt = <3300000>; |
| 557 |
enable-active-high; |
| 558 |
gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; |
| 559 |
}; |
| 560 |
|
| 561 |
pex_hvdd_3v3_reg: regulator-pex { |
| 562 |
compatible = "regulator-fixed"; |
| 563 |
regulator-name = "pex_hvdd_3v3"; |
| 564 |
regulator-min-microvolt = <3300000>; |
| 565 |
regulator-max-microvolt = <3300000>; |
| 566 |
enable-active-high; |
| 567 |
gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; |
| 568 |
vin-supply = <&sys_3v3_reg>; |
| 569 |
}; |
| 570 |
|
| 571 |
vdd_cam1_ldo_reg: regulator-cam1 { |
| 572 |
compatible = "regulator-fixed"; |
| 573 |
regulator-name = "vdd_cam1_ldo"; |
| 574 |
regulator-min-microvolt = <2800000>; |
| 575 |
regulator-max-microvolt = <2800000>; |
| 576 |
enable-active-high; |
| 577 |
gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; |
| 578 |
vin-supply = <&sys_3v3_reg>; |
| 579 |
}; |
| 580 |
|
| 581 |
vdd_cam2_ldo_reg: regulator-cam2 { |
| 582 |
compatible = "regulator-fixed"; |
| 583 |
regulator-name = "vdd_cam2_ldo"; |
| 584 |
regulator-min-microvolt = <2800000>; |
| 585 |
regulator-max-microvolt = <2800000>; |
| 586 |
enable-active-high; |
| 587 |
gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; |
| 588 |
vin-supply = <&sys_3v3_reg>; |
| 589 |
}; |
| 590 |
|
| 591 |
vdd_cam3_ldo_reg: regulator-cam3 { |
| 592 |
compatible = "regulator-fixed"; |
| 593 |
regulator-name = "vdd_cam3_ldo"; |
| 594 |
regulator-min-microvolt = <3300000>; |
| 595 |
regulator-max-microvolt = <3300000>; |
| 596 |
enable-active-high; |
| 597 |
gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; |
| 598 |
vin-supply = <&sys_3v3_reg>; |
| 599 |
}; |
| 600 |
|
| 601 |
vdd_com_reg: regulator-com { |
| 602 |
compatible = "regulator-fixed"; |
| 603 |
regulator-name = "vdd_com"; |
| 604 |
regulator-min-microvolt = <3300000>; |
| 605 |
regulator-max-microvolt = <3300000>; |
| 606 |
regulator-always-on; |
| 607 |
regulator-boot-on; |
| 608 |
enable-active-high; |
| 609 |
gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; |
| 610 |
vin-supply = <&sys_3v3_reg>; |
| 611 |
}; |
| 612 |
|
| 613 |
vdd_fuse_3v3_reg: regulator-fuse { |
| 614 |
compatible = "regulator-fixed"; |
| 615 |
regulator-name = "vdd_fuse_3v3"; |
| 616 |
regulator-min-microvolt = <3300000>; |
| 617 |
regulator-max-microvolt = <3300000>; |
| 618 |
enable-active-high; |
| 619 |
gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; |
| 620 |
vin-supply = <&sys_3v3_reg>; |
| 621 |
}; |
| 622 |
|
| 623 |
vdd_pnl1_reg: regulator-pnl1 { |
| 624 |
compatible = "regulator-fixed"; |
| 625 |
regulator-name = "vdd_pnl1"; |
| 626 |
regulator-min-microvolt = <3300000>; |
| 627 |
regulator-max-microvolt = <3300000>; |
| 628 |
regulator-always-on; |
| 629 |
regulator-boot-on; |
| 630 |
enable-active-high; |
| 631 |
gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; |
| 632 |
vin-supply = <&sys_3v3_reg>; |
| 633 |
}; |
| 634 |
|
| 635 |
vdd_vid_reg: regulator-vid { |
| 636 |
compatible = "regulator-fixed"; |
| 637 |
regulator-name = "vddio_vid"; |
| 638 |
regulator-min-microvolt = <5000000>; |
| 639 |
regulator-max-microvolt = <5000000>; |
| 640 |
enable-active-high; |
| 641 |
gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; |
| 642 |
gpio-open-drain; |
| 643 |
vin-supply = <&vdd_5v0_reg>; |
| 644 |
}; |
| 645 |
|
| 646 |
sound { |
| 647 |
compatible = "nvidia,tegra-audio-wm8903-cardhu", |
| 648 |
"nvidia,tegra-audio-wm8903"; |
| 649 |
nvidia,model = "NVIDIA Tegra Cardhu"; |
| 650 |
|
| 651 |
nvidia,audio-routing = |
| 652 |
"Headphone Jack", "HPOUTR", |
| 653 |
"Headphone Jack", "HPOUTL", |
| 654 |
"Int Spk", "ROP", |
| 655 |
"Int Spk", "RON", |
| 656 |
"Int Spk", "LOP", |
| 657 |
"Int Spk", "LON", |
| 658 |
"Mic Jack", "MICBIAS", |
| 659 |
"IN1L", "Mic Jack"; |
| 660 |
|
| 661 |
nvidia,i2s-controller = <&tegra_i2s1>; |
| 662 |
nvidia,audio-codec = <&wm8903>; |
| 663 |
|
| 664 |
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; |
| 665 |
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) |
| 666 |
GPIO_ACTIVE_LOW>; |
| 667 |
|
| 668 |
clocks = <&tegra_car TEGRA30_CLK_PLL_A>, |
| 669 |
<&tegra_car TEGRA30_CLK_PLL_A_OUT0>, |
| 670 |
<&tegra_pmc TEGRA_PMC_CLK_OUT_1>; |
| 671 |
clock-names = "pll_a", "pll_a_out0", "mclk"; |
| 672 |
|
| 673 |
assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, |
| 674 |
<&tegra_pmc TEGRA_PMC_CLK_OUT_1>; |
| 675 |
|
| 676 |
assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, |
| 677 |
<&tegra_car TEGRA30_CLK_EXTERN1>; |
| 678 |
}; |
| 679 |
|
| 680 |
thermal-zones { |
| 681 |
cpu-thermal { |
| 682 |
polling-delay-passive = <1000>; /* milliseconds */ |
| 683 |
polling-delay = <5000>; /* milliseconds */ |
| 684 |
|
| 685 |
thermal-sensors = <&nct1008 1>; |
| 686 |
|
| 687 |
trips { |
| 688 |
trip0: cpu-alert0 { |
| 689 |
/* throttle at 57C until temperature drops to 56.8C */ |
| 690 |
temperature = <57000>; |
| 691 |
hysteresis = <200>; |
| 692 |
type = "passive"; |
| 693 |
}; |
| 694 |
|
| 695 |
trip1: cpu-crit { |
| 696 |
/* shut down at 60C */ |
| 697 |
temperature = <60000>; |
| 698 |
hysteresis = <2000>; |
| 699 |
type = "critical"; |
| 700 |
}; |
| 701 |
}; |
| 702 |
|
| 703 |
cooling-maps { |
| 704 |
map0 { |
| 705 |
trip = <&trip0>; |
| 706 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 707 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 708 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 709 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 710 |
}; |
| 711 |
}; |
| 712 |
}; |
| 713 |
}; |
| 714 |
}; |