Debian Codegraph @

arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts

raw
1 // SPDX-License-Identifier: GPL-2.0 OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/input/input.h>
5 #include "tegra30-apalis-v1.1.dtsi"
6
7 / {
8 model = "Toradex Apalis T30 on Apalis Evaluation Board";
9 compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
10 "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
11 "nvidia,tegra30";
12
13 aliases {
14 rtc0 = "/i2c@7000c000/rtc@68";
15 rtc1 = "/i2c@7000d000/pmic@2d";
16 rtc2 = "/rtc@7000e000";
17 serial0 = &uarta;
18 serial1 = &uartb;
19 serial2 = &uartc;
20 serial3 = &uartd;
21 };
22
23 chosen {
24 stdout-path = "serial0:115200n8";
25 };
26
27 pcie@3000 {
28 pci@1,0 {
29 status = "okay";
30 };
31
32 pci@2,0 {
33 status = "okay";
34 };
35 };
36
37 host1x@50000000 {
38 dc@54200000 {
39 rgb {
40 status = "okay";
41 nvidia,panel = <&panel>;
42 };
43 };
44
45 hdmi@54280000 {
46 status = "okay";
47 hdmi-supply = <&reg_5v0>;
48 };
49 };
50
51 gpio@6000d000 {
52 /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
53 pex-perst-n-hog {
54 gpio-hog;
55 gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
56 output-high;
57 line-name = "PEX_PERST_N";
58 };
59 };
60
61 /* Apalis UART1 */
62 serial@70006000 {
63 /delete-property/ dmas;
64 /delete-property/ dma-names;
65 status = "okay";
66 };
67
68 /* Apalis UART2 */
69 serial@70006040 {
70 status = "okay";
71 };
72
73 /* Apalis UART3 */
74 serial@70006200 {
75 status = "okay";
76 };
77
78 /* Apalis UART4 */
79 serial@70006300 {
80 status = "okay";
81 };
82
83 pwm@7000a000 {
84 status = "okay";
85 };
86
87 /*
88 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
89 * board)
90 */
91 i2c@7000c000 {
92 status = "okay";
93 clock-frequency = <400000>;
94
95 /* M41T0M6 real time clock on carrier board */
96 rtc@68 {
97 compatible = "st,m41t0";
98 reg = <0x68>;
99 };
100 };
101
102 /* GEN2_I2C: unused */
103
104 /*
105 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
106 * carrier board)
107 */
108 i2c@7000c500 {
109 status = "okay";
110 clock-frequency = <400000>;
111 };
112
113 /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
114 i2c@7000c700 {
115 status = "okay";
116 };
117
118 /* SPI1: Apalis SPI1 */
119 spi@7000d400 {
120 status = "okay";
121 spi-max-frequency = <25000000>;
122 };
123
124 /* SPI5: Apalis SPI2 */
125 spi@7000dc00 {
126 status = "okay";
127 spi-max-frequency = <25000000>;
128 };
129
130 /* Apalis SD1 */
131 mmc@78000000 {
132 status = "okay";
133 bus-width = <4>;
134 /* SD1_CD# */
135 cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
136 no-1-8-v;
137 };
138
139 /* Apalis MMC1 */
140 mmc@78000400 {
141 status = "okay";
142 bus-width = <8>;
143 /* MMC1_CD# */
144 cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
145 vqmmc-supply = <&reg_vddio_sdmmc3>;
146 };
147
148 /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
149 usb@7d000000 {
150 status = "okay";
151 dr_mode = "otg";
152 };
153
154 usb-phy@7d000000 {
155 status = "okay";
156 vbus-supply = <&reg_usbo1_vbus>;
157 };
158
159 /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
160 usb@7d004000 {
161 status = "okay";
162 };
163
164 usb-phy@7d004000 {
165 status = "okay";
166 vbus-supply = <&reg_usbh_vbus>;
167 };
168
169 /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
170 usb@7d008000 {
171 status = "okay";
172 };
173
174 usb-phy@7d008000 {
175 status = "okay";
176 vbus-supply = <&reg_usbh_vbus>;
177 };
178
179 backlight: backlight {
180 compatible = "pwm-backlight";
181 brightness-levels = <255 231 223 207 191 159 127 0>;
182 default-brightness-level = <6>;
183 /* BKL1_ON */
184 enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
185 power-supply = <&reg_3v3>;
186 pwms = <&pwm 0 5000000>; /* BKL1_PWM */
187 };
188
189 gpio-keys {
190 compatible = "gpio-keys";
191
192 key-wakeup {
193 label = "WAKE1_MICO";
194 gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
195 linux,code = <KEY_WAKEUP>;
196 debounce-interval = <10>;
197 wakeup-source;
198 };
199 };
200
201 panel: panel {
202 /*
203 * edt,et057090dhu: EDT 5.7" LCD TFT
204 * edt,et070080dh6: EDT 7.0" LCD TFT
205 */
206 compatible = "edt,et057090dhu";
207 backlight = <&backlight>;
208 power-supply = <&reg_3v3>;
209 };
210
211 reg_3v3: regulator-3v3 {
212 compatible = "regulator-fixed";
213 regulator-name = "3.3V_SW";
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216 };
217
218 reg_5v0: regulator-5v0 {
219 compatible = "regulator-fixed";
220 regulator-name = "5V_SW";
221 regulator-min-microvolt = <5000000>;
222 regulator-max-microvolt = <5000000>;
223 };
224
225 /* USBO1_EN */
226 reg_usbo1_vbus: regulator-usbo1-vbus {
227 compatible = "regulator-fixed";
228 regulator-name = "VCC_USBO1";
229 regulator-min-microvolt = <5000000>;
230 regulator-max-microvolt = <5000000>;
231 gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
232 enable-active-high;
233 vin-supply = <&reg_5v0>;
234 };
235
236 /* USBH_EN */
237 reg_usbh_vbus: regulator-usbh-vbus {
238 compatible = "regulator-fixed";
239 regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
240 regulator-min-microvolt = <5000000>;
241 regulator-max-microvolt = <5000000>;
242 gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
243 enable-active-high;
244 vin-supply = <&reg_5v0>;
245 };
246
247 /*
248 * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
249 * EN_+3.3_SDMMC3 GPIO
250 */
251 reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
252 compatible = "regulator-gpio";
253 regulator-name = "VDDIO_SDMMC3";
254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvolt = <3300000>;
256 regulator-type = "voltage";
257 gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
258 states = <1800000 0x0>,
259 <3300000 0x1>;
260 startup-delay-us = <100000>;
261 vin-supply = <&vddio_sdmmc_1v8_reg>;
262 };
263 };