| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include <dt-bindings/input/input.h> |
| 5 |
#include "tegra114.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Tegra Note 7"; |
| 9 |
compatible = "nvidia,tn7", "nvidia,tegra114"; |
| 10 |
|
| 11 |
chosen { |
| 12 |
/* TN7's bootloader's arguments need to be overridden */ |
| 13 |
bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2"; |
| 14 |
/* TN7's bootloader will place initrd at this address */ |
| 15 |
linux,initrd-start = <0x82000000>; |
| 16 |
linux,initrd-end = <0x82800000>; |
| 17 |
}; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &uartd; |
| 21 |
}; |
| 22 |
|
| 23 |
firmware { |
| 24 |
trusted-foundations { |
| 25 |
compatible = "tlm,trusted-foundations"; |
| 26 |
tlm,version-major = <2>; |
| 27 |
tlm,version-minor = <8>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
memory@80000000 { |
| 32 |
/* memory >= 0x37e00000 is reserved for firmware usage */ |
| 33 |
reg = <0x80000000 0x37e00000>; |
| 34 |
}; |
| 35 |
|
| 36 |
host1x@50000000 { |
| 37 |
dsi@54300000 { |
| 38 |
status = "okay"; |
| 39 |
|
| 40 |
avdd-dsi-csi-supply = <&vdd_1v2_ap>; |
| 41 |
|
| 42 |
panel@0 { |
| 43 |
compatible = "lg,ld070wx3-sl01"; |
| 44 |
reg = <0>; |
| 45 |
|
| 46 |
power-supply = <&vdd_lcd>; |
| 47 |
backlight = <&backlight>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
serial@70006300 { |
| 53 |
/delete-property/ dmas; |
| 54 |
/delete-property/ dma-names; |
| 55 |
status = "okay"; |
| 56 |
}; |
| 57 |
|
| 58 |
pwm@7000a000 { |
| 59 |
status = "okay"; |
| 60 |
}; |
| 61 |
|
| 62 |
i2c@7000d000 { |
| 63 |
status = "okay"; |
| 64 |
clock-frequency = <400000>; |
| 65 |
|
| 66 |
palmas: pmic@58 { |
| 67 |
compatible = "ti,tps65913", "ti,palmas"; |
| 68 |
reg = <0x58>; |
| 69 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 70 |
|
| 71 |
#interrupt-cells = <2>; |
| 72 |
interrupt-controller; |
| 73 |
|
| 74 |
ti,system-power-controller; |
| 75 |
|
| 76 |
palmas_gpio: gpio { |
| 77 |
compatible = "ti,palmas-gpio"; |
| 78 |
gpio-controller; |
| 79 |
#gpio-cells = <2>; |
| 80 |
}; |
| 81 |
|
| 82 |
pmic { |
| 83 |
compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; |
| 84 |
|
| 85 |
ldoln-in-supply = <&vdd_smps10_out2>; |
| 86 |
|
| 87 |
regulators { |
| 88 |
smps123 { |
| 89 |
regulator-name = "vd-cpu"; |
| 90 |
regulator-min-microvolt = <1000000>; |
| 91 |
regulator-max-microvolt = <1000000>; |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
}; |
| 95 |
|
| 96 |
smps45 { |
| 97 |
regulator-name = "vd-soc"; |
| 98 |
regulator-min-microvolt = <1100000>; |
| 99 |
regulator-max-microvolt = <1100000>; |
| 100 |
regulator-always-on; |
| 101 |
regulator-boot-on; |
| 102 |
}; |
| 103 |
|
| 104 |
smps6 { |
| 105 |
regulator-name = "va-lcd-hv"; |
| 106 |
regulator-min-microvolt = <3000000>; |
| 107 |
regulator-max-microvolt = <3000000>; |
| 108 |
regulator-always-on; |
| 109 |
regulator-boot-on; |
| 110 |
}; |
| 111 |
|
| 112 |
smps7 { |
| 113 |
regulator-name = "vd-ddr"; |
| 114 |
regulator-min-microvolt = <1350000>; |
| 115 |
regulator-max-microvolt = <1350000>; |
| 116 |
regulator-always-on; |
| 117 |
regulator-boot-on; |
| 118 |
}; |
| 119 |
|
| 120 |
vdd_1v8: smps8 { |
| 121 |
regulator-name = "vs-pmu-1v8"; |
| 122 |
regulator-min-microvolt = <1800000>; |
| 123 |
regulator-max-microvolt = <1800000>; |
| 124 |
regulator-always-on; |
| 125 |
regulator-boot-on; |
| 126 |
}; |
| 127 |
|
| 128 |
vdd_2v9_sys: smps9 { |
| 129 |
regulator-name = "vs-sys-2v9"; |
| 130 |
regulator-min-microvolt = <2900000>; |
| 131 |
regulator-max-microvolt = <2900000>; |
| 132 |
regulator-always-on; |
| 133 |
regulator-boot-on; |
| 134 |
}; |
| 135 |
|
| 136 |
vdd_smps10_out1: smps10_out1 { |
| 137 |
regulator-name = "vd-smps10-out1"; |
| 138 |
regulator-min-microvolt = <5000000>; |
| 139 |
regulator-max-microvolt = <5000000>; |
| 140 |
regulator-always-on; |
| 141 |
regulator-boot-on; |
| 142 |
}; |
| 143 |
|
| 144 |
vdd_smps10_out2: smps10_out2 { |
| 145 |
regulator-name = "vd-smps10-out2"; |
| 146 |
regulator-min-microvolt = <5000000>; |
| 147 |
regulator-max-microvolt = <5000000>; |
| 148 |
regulator-always-on; |
| 149 |
regulator-boot-on; |
| 150 |
}; |
| 151 |
|
| 152 |
ldo1 { |
| 153 |
regulator-name = "va-pllx"; |
| 154 |
regulator-min-microvolt = <1050000>; |
| 155 |
regulator-max-microvolt = <1050000>; |
| 156 |
regulator-always-on; |
| 157 |
regulator-boot-on; |
| 158 |
}; |
| 159 |
|
| 160 |
vdd_1v2_ap: ldo2 { |
| 161 |
regulator-name = "va-ap-1v2"; |
| 162 |
regulator-min-microvolt = <1200000>; |
| 163 |
regulator-max-microvolt = <1200000>; |
| 164 |
regulator-always-on; |
| 165 |
regulator-boot-on; |
| 166 |
}; |
| 167 |
|
| 168 |
ldo3 { |
| 169 |
regulator-name = "vd-fuse"; |
| 170 |
regulator-min-microvolt = <1800000>; |
| 171 |
regulator-max-microvolt = <1800000>; |
| 172 |
regulator-always-on; |
| 173 |
regulator-boot-on; |
| 174 |
}; |
| 175 |
|
| 176 |
ldo4 { |
| 177 |
regulator-name = "vd-ts-hv"; |
| 178 |
regulator-min-microvolt = <3200000>; |
| 179 |
regulator-max-microvolt = <3200000>; |
| 180 |
regulator-always-on; |
| 181 |
regulator-boot-on; |
| 182 |
}; |
| 183 |
|
| 184 |
ldo5 { |
| 185 |
regulator-name = "va-cam2-hv"; |
| 186 |
regulator-min-microvolt = <2700000>; |
| 187 |
regulator-max-microvolt = <2700000>; |
| 188 |
}; |
| 189 |
|
| 190 |
ldo6 { |
| 191 |
regulator-name = "va-sns-hv"; |
| 192 |
regulator-min-microvolt = <2850000>; |
| 193 |
regulator-max-microvolt = <2850000>; |
| 194 |
}; |
| 195 |
|
| 196 |
ldo7 { |
| 197 |
regulator-name = "va-cam1-hv"; |
| 198 |
regulator-min-microvolt = <2700000>; |
| 199 |
regulator-max-microvolt = <2700000>; |
| 200 |
}; |
| 201 |
|
| 202 |
ldo8 { |
| 203 |
regulator-name = "va-ap-rtc"; |
| 204 |
regulator-min-microvolt = <1100000>; |
| 205 |
regulator-max-microvolt = <1100000>; |
| 206 |
ti,enable-ldo8-tracking; |
| 207 |
regulator-always-on; |
| 208 |
regulator-boot-on; |
| 209 |
}; |
| 210 |
|
| 211 |
ldo9 { |
| 212 |
regulator-name = "vi-sdcard"; |
| 213 |
regulator-min-microvolt = <2900000>; |
| 214 |
regulator-max-microvolt = <2900000>; |
| 215 |
}; |
| 216 |
|
| 217 |
ldousb { |
| 218 |
regulator-name = "avdd-usb"; |
| 219 |
regulator-min-microvolt = <3300000>; |
| 220 |
regulator-max-microvolt = <3300000>; |
| 221 |
regulator-always-on; |
| 222 |
regulator-boot-on; |
| 223 |
}; |
| 224 |
|
| 225 |
ldoln { |
| 226 |
regulator-name = "va-hdmi"; |
| 227 |
regulator-min-microvolt = <3300000>; |
| 228 |
regulator-max-microvolt = <3300000>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
}; |
| 232 |
|
| 233 |
rtc { |
| 234 |
compatible = "ti,palmas-rtc"; |
| 235 |
interrupt-parent = <&palmas>; |
| 236 |
interrupts = <8 0>; |
| 237 |
}; |
| 238 |
|
| 239 |
}; |
| 240 |
}; |
| 241 |
|
| 242 |
pmc@7000e400 { |
| 243 |
nvidia,invert-interrupt; |
| 244 |
}; |
| 245 |
|
| 246 |
/* eMMC */ |
| 247 |
mmc@78000600 { |
| 248 |
status = "okay"; |
| 249 |
bus-width = <8>; |
| 250 |
non-removable; |
| 251 |
}; |
| 252 |
|
| 253 |
usb@7d000000 { |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
usb-phy@7d000000 { |
| 258 |
status = "okay"; |
| 259 |
nvidia,xcvr-setup = <7>; |
| 260 |
nvidia,xcvr-lsfslew = <2>; |
| 261 |
nvidia,xcvr-lsrslew = <2>; |
| 262 |
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 263 |
/* Should be changed to "otg" once we have vbus_supply */ |
| 264 |
/* As of now, USB devices need to be powered externally */ |
| 265 |
dr_mode = "host"; |
| 266 |
}; |
| 267 |
|
| 268 |
backlight: backlight { |
| 269 |
compatible = "pwm-backlight"; |
| 270 |
pwms = <&pwm 1 40000>; |
| 271 |
|
| 272 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 273 |
default-brightness-level = <6>; |
| 274 |
|
| 275 |
power-supply = <&lcd_bl_en>; |
| 276 |
}; |
| 277 |
|
| 278 |
clk32k_in: clock-32k { |
| 279 |
compatible = "fixed-clock"; |
| 280 |
clock-frequency = <32768>; |
| 281 |
#clock-cells = <0>; |
| 282 |
}; |
| 283 |
|
| 284 |
gpio-keys { |
| 285 |
compatible = "gpio-keys"; |
| 286 |
|
| 287 |
key-power { |
| 288 |
label = "Power"; |
| 289 |
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; |
| 290 |
linux,code = <KEY_POWER>; |
| 291 |
wakeup-source; |
| 292 |
}; |
| 293 |
|
| 294 |
key-volume-down { |
| 295 |
label = "Volume Down"; |
| 296 |
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; |
| 297 |
linux,code = <KEY_VOLUMEDOWN>; |
| 298 |
}; |
| 299 |
|
| 300 |
key-volume-up { |
| 301 |
label = "Volume Up"; |
| 302 |
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; |
| 303 |
linux,code = <KEY_VOLUMEUP>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
/* FIXME: output of BQ24192 */ |
| 308 |
vs_sys: regulator-vs { |
| 309 |
compatible = "regulator-fixed"; |
| 310 |
regulator-name = "VS_SYS"; |
| 311 |
regulator-min-microvolt = <4200000>; |
| 312 |
regulator-max-microvolt = <4200000>; |
| 313 |
regulator-always-on; |
| 314 |
regulator-boot-on; |
| 315 |
}; |
| 316 |
|
| 317 |
lcd_bl_en: regulator-lcden { |
| 318 |
compatible = "regulator-fixed"; |
| 319 |
regulator-name = "VDD_LCD_BL"; |
| 320 |
regulator-min-microvolt = <16500000>; |
| 321 |
regulator-max-microvolt = <16500000>; |
| 322 |
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; |
| 323 |
enable-active-high; |
| 324 |
vin-supply = <&vs_sys>; |
| 325 |
regulator-boot-on; |
| 326 |
}; |
| 327 |
|
| 328 |
vdd_lcd: regulator-lcd { |
| 329 |
compatible = "regulator-fixed"; |
| 330 |
regulator-name = "VD_LCD_1V8"; |
| 331 |
regulator-min-microvolt = <1800000>; |
| 332 |
regulator-max-microvolt = <1800000>; |
| 333 |
gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; |
| 334 |
enable-active-high; |
| 335 |
vin-supply = <&vdd_1v8>; |
| 336 |
regulator-boot-on; |
| 337 |
}; |
| 338 |
}; |