| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include <dt-bindings/input/input.h> |
| 5 |
#include "tegra20-colibri.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Toradex Colibri T20 on Iris"; |
| 9 |
compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20", |
| 10 |
"nvidia,tegra20"; |
| 11 |
|
| 12 |
aliases { |
| 13 |
rtc0 = "/i2c@7000c000/rtc@68"; |
| 14 |
rtc1 = "/i2c@7000d000/pmic@34"; |
| 15 |
rtc2 = "/rtc@7000e000"; |
| 16 |
serial0 = &uarta; |
| 17 |
serial1 = &uartd; |
| 18 |
serial2 = &uartb; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
host1x@50000000 { |
| 26 |
dc@54200000 { |
| 27 |
rgb { |
| 28 |
status = "okay"; |
| 29 |
nvidia,panel = <&panel>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
hdmi@54280000 { |
| 34 |
status = "okay"; |
| 35 |
hdmi-supply = <®_5v0>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
pinmux@70000014 { |
| 40 |
state_default: pinmux { |
| 41 |
bl-on { |
| 42 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 43 |
}; |
| 44 |
|
| 45 |
ddc { |
| 46 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 47 |
}; |
| 48 |
|
| 49 |
hotplug-detect { |
| 50 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 51 |
}; |
| 52 |
|
| 53 |
i2c { |
| 54 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 55 |
}; |
| 56 |
|
| 57 |
lcd { |
| 58 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 59 |
}; |
| 60 |
|
| 61 |
lm1 { |
| 62 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 63 |
}; |
| 64 |
|
| 65 |
mmc { |
| 66 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 67 |
}; |
| 68 |
|
| 69 |
mmccd { |
| 70 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 71 |
}; |
| 72 |
|
| 73 |
sdc { |
| 74 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 75 |
}; |
| 76 |
|
| 77 |
sdb_sdd { |
| 78 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 79 |
}; |
| 80 |
|
| 81 |
ssp { |
| 82 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 83 |
}; |
| 84 |
|
| 85 |
uart-a { |
| 86 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 87 |
}; |
| 88 |
|
| 89 |
uart-b { |
| 90 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 91 |
}; |
| 92 |
|
| 93 |
uart-c { |
| 94 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 95 |
}; |
| 96 |
|
| 97 |
usbh-pen { |
| 98 |
nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
/* Colibri UART-A */ |
| 104 |
serial@70006000 { |
| 105 |
/delete-property/ dmas; |
| 106 |
/delete-property/ dma-names; |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
/* Colibri UART-C */ |
| 111 |
serial@70006040 { |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
/* Colibri UART-B */ |
| 116 |
serial@70006300 { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
pwm@7000a000 { |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
/* |
| 125 |
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier |
| 126 |
* board) |
| 127 |
*/ |
| 128 |
i2c@7000c000 { |
| 129 |
status = "okay"; |
| 130 |
clock-frequency = <400000>; |
| 131 |
|
| 132 |
/* M41T0M6 real time clock on carrier board */ |
| 133 |
rtc@68 { |
| 134 |
compatible = "st,m41t0"; |
| 135 |
reg = <0x68>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
/* GEN2_I2C: unused */ |
| 140 |
|
| 141 |
/* CAM_I2C (I2C3): unused */ |
| 142 |
|
| 143 |
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ |
| 144 |
i2c@7000c400 { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
/* SPI4: Colibri SSP */ |
| 149 |
spi@7000da00 { |
| 150 |
status = "okay"; |
| 151 |
spi-max-frequency = <25000000>; |
| 152 |
}; |
| 153 |
|
| 154 |
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */ |
| 155 |
usb@c5000000 { |
| 156 |
status = "okay"; |
| 157 |
dr_mode = "otg"; |
| 158 |
}; |
| 159 |
|
| 160 |
usb-phy@c5000000 { |
| 161 |
status = "okay"; |
| 162 |
vbus-supply = <®_usbc_vbus>; |
| 163 |
}; |
| 164 |
|
| 165 |
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */ |
| 166 |
usb@c5008000 { |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
usb-phy@c5008000 { |
| 171 |
status = "okay"; |
| 172 |
vbus-supply = <®_usbh_vbus>; |
| 173 |
}; |
| 174 |
|
| 175 |
/* SD/MMC */ |
| 176 |
mmc@c8000600 { |
| 177 |
status = "okay"; |
| 178 |
bus-width = <4>; |
| 179 |
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ |
| 180 |
no-1-8-v; |
| 181 |
}; |
| 182 |
|
| 183 |
backlight: backlight { |
| 184 |
compatible = "pwm-backlight"; |
| 185 |
brightness-levels = <255 128 64 32 16 8 4 0>; |
| 186 |
default-brightness-level = <6>; |
| 187 |
/* BL_ON */ |
| 188 |
enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>; |
| 189 |
power-supply = <®_3v3>; |
| 190 |
pwms = <&pwm 0 5000000>; /* PWM<A> */ |
| 191 |
}; |
| 192 |
|
| 193 |
gpio-keys { |
| 194 |
compatible = "gpio-keys"; |
| 195 |
|
| 196 |
key-wakeup { |
| 197 |
label = "SODIMM pin 45 wakeup"; |
| 198 |
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; |
| 199 |
linux,code = <KEY_WAKEUP>; |
| 200 |
debounce-interval = <10>; |
| 201 |
wakeup-source; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
panel: panel { |
| 206 |
/* |
| 207 |
* edt,et057090dhu: EDT 5.7" LCD TFT |
| 208 |
* edt,et070080dh6: EDT 7.0" LCD TFT |
| 209 |
*/ |
| 210 |
compatible = "edt,et057090dhu"; |
| 211 |
backlight = <&backlight>; |
| 212 |
power-supply = <®_3v3>; |
| 213 |
}; |
| 214 |
|
| 215 |
reg_3v3: regulator-3v3 { |
| 216 |
compatible = "regulator-fixed"; |
| 217 |
regulator-name = "3.3V"; |
| 218 |
regulator-min-microvolt = <3300000>; |
| 219 |
regulator-max-microvolt = <3300000>; |
| 220 |
}; |
| 221 |
|
| 222 |
reg_5v0: regulator-5v0 { |
| 223 |
compatible = "regulator-fixed"; |
| 224 |
regulator-name = "5V"; |
| 225 |
regulator-min-microvolt = <5000000>; |
| 226 |
regulator-max-microvolt = <5000000>; |
| 227 |
}; |
| 228 |
|
| 229 |
reg_usbc_vbus: regulator-usbc-vbus { |
| 230 |
compatible = "regulator-fixed"; |
| 231 |
regulator-name = "VCC_USB2"; |
| 232 |
regulator-min-microvolt = <5000000>; |
| 233 |
regulator-max-microvolt = <5000000>; |
| 234 |
vin-supply = <®_5v0>; |
| 235 |
}; |
| 236 |
|
| 237 |
/* USBH_PEN resp. USB_P_EN */ |
| 238 |
reg_usbh_vbus: regulator-usbh-vbus { |
| 239 |
compatible = "regulator-fixed"; |
| 240 |
regulator-name = "VCC_USB1"; |
| 241 |
regulator-min-microvolt = <5000000>; |
| 242 |
regulator-max-microvolt = <5000000>; |
| 243 |
gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; |
| 244 |
vin-supply = <®_5v0>; |
| 245 |
}; |
| 246 |
}; |