| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/input/input.h> |
| 3 |
#include <dt-bindings/thermal/thermal.h> |
| 4 |
#include "tegra124.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
aliases { |
| 8 |
rtc0 = "/i2c@7000d000/pmic@40"; |
| 9 |
rtc1 = "/rtc@7000e000"; |
| 10 |
serial0 = &uarta; |
| 11 |
}; |
| 12 |
|
| 13 |
chosen { |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
/* |
| 18 |
* Note that recent version of the device tree compiler (starting with |
| 19 |
* version 1.4.2) warn about this node containing a reg property, but |
| 20 |
* missing a unit-address. However, the bootloader on these Chromebook |
| 21 |
* devices relies on the full name of this node to be exactly /memory. |
| 22 |
* Adding the unit-address causes the bootloader to create a /memory |
| 23 |
* node and write the memory bank configuration to that node, which in |
| 24 |
* turn leads the kernel to believe that the device has 2 GiB of |
| 25 |
* memory instead of the amount detected by the bootloader. |
| 26 |
* |
| 27 |
* The name of this node is effectively ABI and must not be changed. |
| 28 |
*/ |
| 29 |
memory { |
| 30 |
device_type = "memory"; |
| 31 |
reg = <0x0 0x80000000 0x0 0x80000000>; |
| 32 |
}; |
| 33 |
|
| 34 |
/delete-node/ memory@80000000; |
| 35 |
|
| 36 |
host1x@50000000 { |
| 37 |
hdmi@54280000 { |
| 38 |
status = "okay"; |
| 39 |
|
| 40 |
vdd-supply = <&vdd_3v3_hdmi>; |
| 41 |
pll-supply = <&vdd_hdmi_pll>; |
| 42 |
hdmi-supply = <&vdd_5v0_hdmi>; |
| 43 |
|
| 44 |
nvidia,ddc-i2c-bus = <&hdmi_ddc>; |
| 45 |
nvidia,hpd-gpio = |
| 46 |
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; |
| 47 |
}; |
| 48 |
|
| 49 |
sor@54540000 { |
| 50 |
status = "okay"; |
| 51 |
|
| 52 |
avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; |
| 53 |
vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; |
| 54 |
|
| 55 |
nvidia,dpaux = <&dpaux>; |
| 56 |
nvidia,panel = <&panel>; |
| 57 |
}; |
| 58 |
|
| 59 |
dpaux@545c0000 { |
| 60 |
vdd-supply = <&vdd_3v3_panel>; |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
gpu@57000000 { |
| 66 |
status = "okay"; |
| 67 |
|
| 68 |
vdd-supply = <&vdd_gpu>; |
| 69 |
}; |
| 70 |
|
| 71 |
serial@70006000 { |
| 72 |
/* Debug connector on the bottom of the board near SD card. */ |
| 73 |
/delete-property/ dmas; |
| 74 |
/delete-property/ dma-names; |
| 75 |
status = "okay"; |
| 76 |
}; |
| 77 |
|
| 78 |
pwm@7000a000 { |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
i2c@7000c000 { |
| 83 |
status = "okay"; |
| 84 |
clock-frequency = <100000>; |
| 85 |
|
| 86 |
acodec: audio-codec@10 { |
| 87 |
compatible = "maxim,max98090"; |
| 88 |
reg = <0x10>; |
| 89 |
interrupt-parent = <&gpio>; |
| 90 |
interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; |
| 91 |
}; |
| 92 |
|
| 93 |
tmp451: temperature-sensor@4c { |
| 94 |
compatible = "ti,tmp451"; |
| 95 |
reg = <0x4c>; |
| 96 |
interrupt-parent = <&gpio>; |
| 97 |
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>; |
| 98 |
|
| 99 |
#thermal-sensor-cells = <1>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
i2c@7000c400 { |
| 104 |
status = "okay"; |
| 105 |
clock-frequency = <100000>; |
| 106 |
|
| 107 |
trackpad@15 { |
| 108 |
compatible = "elan,ekth3000"; |
| 109 |
reg = <0x15>; |
| 110 |
interrupt-parent = <&gpio>; |
| 111 |
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; |
| 112 |
wakeup-source; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
i2c@7000c500 { |
| 117 |
status = "okay"; |
| 118 |
clock-frequency = <400000>; |
| 119 |
|
| 120 |
tpm@20 { |
| 121 |
compatible = "infineon,slb9645tt"; |
| 122 |
reg = <0x20>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
hdmi_ddc: i2c@7000c700 { |
| 127 |
status = "okay"; |
| 128 |
clock-frequency = <100000>; |
| 129 |
}; |
| 130 |
|
| 131 |
i2c@7000d000 { |
| 132 |
status = "okay"; |
| 133 |
clock-frequency = <400000>; |
| 134 |
|
| 135 |
pmic: pmic@40 { |
| 136 |
compatible = "ams,as3722"; |
| 137 |
reg = <0x40>; |
| 138 |
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; |
| 139 |
|
| 140 |
ams,system-power-controller; |
| 141 |
|
| 142 |
#interrupt-cells = <2>; |
| 143 |
interrupt-controller; |
| 144 |
|
| 145 |
gpio-controller; |
| 146 |
#gpio-cells = <2>; |
| 147 |
|
| 148 |
pinctrl-names = "default"; |
| 149 |
pinctrl-0 = <&as3722_default>; |
| 150 |
|
| 151 |
as3722_default: pinmux { |
| 152 |
gpio0 { |
| 153 |
pins = "gpio0"; |
| 154 |
function = "gpio"; |
| 155 |
bias-pull-down; |
| 156 |
}; |
| 157 |
|
| 158 |
gpio1 { |
| 159 |
pins = "gpio1"; |
| 160 |
function = "gpio"; |
| 161 |
bias-pull-up; |
| 162 |
}; |
| 163 |
|
| 164 |
gpio2_4_7 { |
| 165 |
pins = "gpio2", "gpio4", "gpio7"; |
| 166 |
function = "gpio"; |
| 167 |
bias-pull-up; |
| 168 |
}; |
| 169 |
|
| 170 |
gpio3_6 { |
| 171 |
pins = "gpio3", "gpio6"; |
| 172 |
bias-high-impedance; |
| 173 |
}; |
| 174 |
|
| 175 |
gpio5 { |
| 176 |
pins = "gpio5"; |
| 177 |
function = "clk32k-out"; |
| 178 |
bias-pull-down; |
| 179 |
}; |
| 180 |
}; |
| 181 |
|
| 182 |
regulators { |
| 183 |
vsup-sd2-supply = <&vdd_5v0_sys>; |
| 184 |
vsup-sd3-supply = <&vdd_5v0_sys>; |
| 185 |
vsup-sd4-supply = <&vdd_5v0_sys>; |
| 186 |
vsup-sd5-supply = <&vdd_5v0_sys>; |
| 187 |
vin-ldo0-supply = <&vdd_1v35_lp0>; |
| 188 |
vin-ldo1-6-supply = <&vdd_3v3_run>; |
| 189 |
vin-ldo2-5-7-supply = <&vddio_1v8>; |
| 190 |
vin-ldo3-4-supply = <&vdd_3v3_sys>; |
| 191 |
vin-ldo9-10-supply = <&vdd_5v0_sys>; |
| 192 |
vin-ldo11-supply = <&vdd_3v3_run>; |
| 193 |
|
| 194 |
vdd_cpu: sd0 { |
| 195 |
regulator-name = "+VDD_CPU_AP"; |
| 196 |
regulator-min-microvolt = <700000>; |
| 197 |
regulator-max-microvolt = <1350000>; |
| 198 |
regulator-min-microamp = <3500000>; |
| 199 |
regulator-max-microamp = <3500000>; |
| 200 |
regulator-always-on; |
| 201 |
regulator-boot-on; |
| 202 |
ams,ext-control = <2>; |
| 203 |
}; |
| 204 |
|
| 205 |
sd1 { |
| 206 |
regulator-name = "+VDD_CORE"; |
| 207 |
regulator-min-microvolt = <700000>; |
| 208 |
regulator-max-microvolt = <1350000>; |
| 209 |
regulator-min-microamp = <2500000>; |
| 210 |
regulator-max-microamp = <4000000>; |
| 211 |
regulator-always-on; |
| 212 |
regulator-boot-on; |
| 213 |
ams,ext-control = <1>; |
| 214 |
}; |
| 215 |
|
| 216 |
vdd_1v35_lp0: sd2 { |
| 217 |
regulator-name = "+1.35V_LP0(sd2)"; |
| 218 |
regulator-min-microvolt = <1350000>; |
| 219 |
regulator-max-microvolt = <1350000>; |
| 220 |
regulator-always-on; |
| 221 |
regulator-boot-on; |
| 222 |
}; |
| 223 |
|
| 224 |
sd3 { |
| 225 |
regulator-name = "+1.35V_LP0(sd3)"; |
| 226 |
regulator-min-microvolt = <1350000>; |
| 227 |
regulator-max-microvolt = <1350000>; |
| 228 |
regulator-always-on; |
| 229 |
regulator-boot-on; |
| 230 |
}; |
| 231 |
|
| 232 |
vdd_1v05_run: sd4 { |
| 233 |
regulator-name = "+1.05V_RUN"; |
| 234 |
regulator-min-microvolt = <1050000>; |
| 235 |
regulator-max-microvolt = <1050000>; |
| 236 |
}; |
| 237 |
|
| 238 |
vddio_1v8: sd5 { |
| 239 |
regulator-name = "+1.8V_VDDIO"; |
| 240 |
regulator-min-microvolt = <1800000>; |
| 241 |
regulator-max-microvolt = <1800000>; |
| 242 |
regulator-always-on; |
| 243 |
}; |
| 244 |
|
| 245 |
vdd_gpu: sd6 { |
| 246 |
regulator-name = "+VDD_GPU_AP"; |
| 247 |
regulator-min-microvolt = <650000>; |
| 248 |
regulator-max-microvolt = <1200000>; |
| 249 |
regulator-min-microamp = <3500000>; |
| 250 |
regulator-max-microamp = <3500000>; |
| 251 |
regulator-boot-on; |
| 252 |
regulator-always-on; |
| 253 |
}; |
| 254 |
|
| 255 |
avdd_1v05_run: ldo0 { |
| 256 |
regulator-name = "+1.05V_RUN_AVDD"; |
| 257 |
regulator-min-microvolt = <1050000>; |
| 258 |
regulator-max-microvolt = <1050000>; |
| 259 |
regulator-boot-on; |
| 260 |
regulator-always-on; |
| 261 |
ams,ext-control = <1>; |
| 262 |
}; |
| 263 |
|
| 264 |
ldo1 { |
| 265 |
regulator-name = "+1.8V_RUN_CAM"; |
| 266 |
regulator-min-microvolt = <1800000>; |
| 267 |
regulator-max-microvolt = <1800000>; |
| 268 |
}; |
| 269 |
|
| 270 |
ldo2 { |
| 271 |
regulator-name = "+1.2V_GEN_AVDD"; |
| 272 |
regulator-min-microvolt = <1200000>; |
| 273 |
regulator-max-microvolt = <1200000>; |
| 274 |
regulator-boot-on; |
| 275 |
regulator-always-on; |
| 276 |
}; |
| 277 |
|
| 278 |
ldo3 { |
| 279 |
regulator-name = "+1.00V_LP0_VDD_RTC"; |
| 280 |
regulator-min-microvolt = <1000000>; |
| 281 |
regulator-max-microvolt = <1000000>; |
| 282 |
regulator-boot-on; |
| 283 |
regulator-always-on; |
| 284 |
ams,enable-tracking; |
| 285 |
}; |
| 286 |
|
| 287 |
vdd_run_cam: ldo4 { |
| 288 |
regulator-name = "+3.3V_RUN_CAM"; |
| 289 |
regulator-min-microvolt = <2800000>; |
| 290 |
regulator-max-microvolt = <2800000>; |
| 291 |
}; |
| 292 |
|
| 293 |
ldo5 { |
| 294 |
regulator-name = "+1.2V_RUN_CAM_FRONT"; |
| 295 |
regulator-min-microvolt = <1200000>; |
| 296 |
regulator-max-microvolt = <1200000>; |
| 297 |
}; |
| 298 |
|
| 299 |
vddio_sdmmc3: ldo6 { |
| 300 |
regulator-name = "+VDDIO_SDMMC3"; |
| 301 |
regulator-min-microvolt = <1800000>; |
| 302 |
regulator-max-microvolt = <3300000>; |
| 303 |
}; |
| 304 |
|
| 305 |
ldo7 { |
| 306 |
regulator-name = "+1.05V_RUN_CAM_REAR"; |
| 307 |
regulator-min-microvolt = <1050000>; |
| 308 |
regulator-max-microvolt = <1050000>; |
| 309 |
}; |
| 310 |
|
| 311 |
ldo9 { |
| 312 |
regulator-name = "+2.8V_RUN_TOUCH"; |
| 313 |
regulator-min-microvolt = <2800000>; |
| 314 |
regulator-max-microvolt = <2800000>; |
| 315 |
}; |
| 316 |
|
| 317 |
ldo10 { |
| 318 |
regulator-name = "+2.8V_RUN_CAM_AF"; |
| 319 |
regulator-min-microvolt = <2800000>; |
| 320 |
regulator-max-microvolt = <2800000>; |
| 321 |
}; |
| 322 |
|
| 323 |
ldo11 { |
| 324 |
regulator-name = "+1.8V_RUN_VPP_FUSE"; |
| 325 |
regulator-min-microvolt = <1800000>; |
| 326 |
regulator-max-microvolt = <1800000>; |
| 327 |
}; |
| 328 |
}; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
spi@7000d400 { |
| 333 |
status = "okay"; |
| 334 |
|
| 335 |
cros_ec: cros-ec@0 { |
| 336 |
compatible = "google,cros-ec-spi"; |
| 337 |
spi-max-frequency = <3000000>; |
| 338 |
interrupt-parent = <&gpio>; |
| 339 |
interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; |
| 340 |
reg = <0>; |
| 341 |
wakeup-source; |
| 342 |
|
| 343 |
google,cros-ec-spi-msg-delay = <2000>; |
| 344 |
|
| 345 |
i2c-tunnel { |
| 346 |
compatible = "google,cros-ec-i2c-tunnel"; |
| 347 |
#address-cells = <1>; |
| 348 |
#size-cells = <0>; |
| 349 |
|
| 350 |
google,remote-bus = <0>; |
| 351 |
|
| 352 |
charger: bq24735@9 { |
| 353 |
compatible = "ti,bq24735"; |
| 354 |
reg = <0x9>; |
| 355 |
interrupt-parent = <&gpio>; |
| 356 |
interrupts = <TEGRA_GPIO(J, 0) |
| 357 |
IRQ_TYPE_EDGE_BOTH>; |
| 358 |
ti,ac-detect-gpios = <&gpio |
| 359 |
TEGRA_GPIO(J, 0) |
| 360 |
GPIO_ACTIVE_HIGH>; |
| 361 |
ti,external-control; |
| 362 |
}; |
| 363 |
|
| 364 |
battery: sbs-battery@b { |
| 365 |
compatible = "sbs,sbs-battery"; |
| 366 |
reg = <0xb>; |
| 367 |
sbs,i2c-retry-count = <2>; |
| 368 |
sbs,poll-retry-count = <10>; |
| 369 |
power-supplies = <&charger>; |
| 370 |
}; |
| 371 |
}; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
spi@7000da00 { |
| 376 |
status = "okay"; |
| 377 |
spi-max-frequency = <25000000>; |
| 378 |
|
| 379 |
flash@0 { |
| 380 |
compatible = "winbond,w25q32dw", "jedec,spi-nor"; |
| 381 |
spi-max-frequency = <25000000>; |
| 382 |
reg = <0>; |
| 383 |
}; |
| 384 |
}; |
| 385 |
|
| 386 |
pmc@7000e400 { |
| 387 |
nvidia,invert-interrupt; |
| 388 |
nvidia,suspend-mode = <0>; |
| 389 |
nvidia,cpu-pwr-good-time = <500>; |
| 390 |
nvidia,cpu-pwr-off-time = <300>; |
| 391 |
nvidia,core-pwr-good-time = <641 3845>; |
| 392 |
nvidia,core-pwr-off-time = <61036>; |
| 393 |
nvidia,core-power-req-active-high; |
| 394 |
nvidia,sys-clock-req-active-high; |
| 395 |
}; |
| 396 |
|
| 397 |
cec@70015000 { |
| 398 |
status = "okay"; |
| 399 |
}; |
| 400 |
|
| 401 |
hda@70030000 { |
| 402 |
status = "okay"; |
| 403 |
}; |
| 404 |
|
| 405 |
usb@70090000 { |
| 406 |
phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ |
| 407 |
<&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ |
| 408 |
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ |
| 409 |
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ |
| 410 |
<&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ |
| 411 |
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; |
| 412 |
|
| 413 |
avddio-pex-supply = <&vdd_1v05_run>; |
| 414 |
dvddio-pex-supply = <&vdd_1v05_run>; |
| 415 |
avdd-usb-supply = <&vdd_3v3_lp0>; |
| 416 |
avdd-pll-utmip-supply = <&vddio_1v8>; |
| 417 |
avdd-pll-erefe-supply = <&avdd_1v05_run>; |
| 418 |
avdd-usb-ss-pll-supply = <&vdd_1v05_run>; |
| 419 |
hvdd-usb-ss-supply = <&vdd_3v3_lp0>; |
| 420 |
hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; |
| 421 |
|
| 422 |
status = "okay"; |
| 423 |
}; |
| 424 |
|
| 425 |
padctl@7009f000 { |
| 426 |
status = "okay"; |
| 427 |
|
| 428 |
avdd-pll-utmip-supply = <&vddio_1v8>; |
| 429 |
avdd-pll-erefe-supply = <&avdd_1v05_run>; |
| 430 |
avdd-pex-pll-supply = <&vdd_1v05_run>; |
| 431 |
hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; |
| 432 |
|
| 433 |
pads { |
| 434 |
usb2 { |
| 435 |
status = "okay"; |
| 436 |
|
| 437 |
lanes { |
| 438 |
usb2-0 { |
| 439 |
nvidia,function = "xusb"; |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
usb2-1 { |
| 444 |
nvidia,function = "xusb"; |
| 445 |
status = "okay"; |
| 446 |
}; |
| 447 |
|
| 448 |
usb2-2 { |
| 449 |
nvidia,function = "xusb"; |
| 450 |
status = "okay"; |
| 451 |
}; |
| 452 |
}; |
| 453 |
}; |
| 454 |
|
| 455 |
pcie { |
| 456 |
status = "okay"; |
| 457 |
|
| 458 |
lanes { |
| 459 |
pcie-0 { |
| 460 |
nvidia,function = "usb3-ss"; |
| 461 |
status = "okay"; |
| 462 |
}; |
| 463 |
|
| 464 |
pcie-1 { |
| 465 |
nvidia,function = "usb3-ss"; |
| 466 |
status = "okay"; |
| 467 |
}; |
| 468 |
}; |
| 469 |
}; |
| 470 |
}; |
| 471 |
|
| 472 |
ports { |
| 473 |
usb2-0 { |
| 474 |
vbus-supply = <&vdd_usb1_vbus>; |
| 475 |
status = "okay"; |
| 476 |
mode = "otg"; |
| 477 |
usb-role-switch; |
| 478 |
}; |
| 479 |
|
| 480 |
usb2-1 { |
| 481 |
vbus-supply = <&vdd_run_cam>; |
| 482 |
status = "okay"; |
| 483 |
mode = "host"; |
| 484 |
}; |
| 485 |
|
| 486 |
usb2-2 { |
| 487 |
vbus-supply = <&vdd_usb3_vbus>; |
| 488 |
status = "okay"; |
| 489 |
mode = "host"; |
| 490 |
}; |
| 491 |
|
| 492 |
usb3-0 { |
| 493 |
nvidia,usb2-companion = <0>; |
| 494 |
status = "okay"; |
| 495 |
}; |
| 496 |
|
| 497 |
usb3-1 { |
| 498 |
nvidia,usb2-companion = <1>; |
| 499 |
status = "okay"; |
| 500 |
}; |
| 501 |
}; |
| 502 |
}; |
| 503 |
|
| 504 |
mmc@700b0000 { /* WiFi/BT on this bus */ |
| 505 |
status = "okay"; |
| 506 |
bus-width = <4>; |
| 507 |
no-1-8-v; |
| 508 |
non-removable; |
| 509 |
mmc-pwrseq = <&sdhci0_pwrseq>; |
| 510 |
vmmc-supply = <&vdd_3v3_lp0>; |
| 511 |
vqmmc-supply = <&vddio_1v8>; |
| 512 |
keep-power-in-suspend; |
| 513 |
}; |
| 514 |
|
| 515 |
mmc@700b0400 { /* SD Card on this bus */ |
| 516 |
status = "okay"; |
| 517 |
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; |
| 518 |
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; |
| 519 |
bus-width = <4>; |
| 520 |
no-1-8-v; |
| 521 |
vqmmc-supply = <&vddio_sdmmc3>; |
| 522 |
}; |
| 523 |
|
| 524 |
mmc@700b0600 { /* eMMC on this bus */ |
| 525 |
status = "okay"; |
| 526 |
bus-width = <8>; |
| 527 |
no-1-8-v; |
| 528 |
non-removable; |
| 529 |
}; |
| 530 |
|
| 531 |
/* CPU DFLL clock */ |
| 532 |
clock@70110000 { |
| 533 |
status = "okay"; |
| 534 |
vdd-cpu-supply = <&vdd_cpu>; |
| 535 |
nvidia,i2c-fs-rate = <400000>; |
| 536 |
}; |
| 537 |
|
| 538 |
ahub@70300000 { |
| 539 |
i2s@70301100 { |
| 540 |
status = "okay"; |
| 541 |
}; |
| 542 |
}; |
| 543 |
|
| 544 |
backlight: backlight { |
| 545 |
compatible = "pwm-backlight"; |
| 546 |
|
| 547 |
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; |
| 548 |
power-supply = <&vdd_led>; |
| 549 |
pwms = <&pwm 1 1000000>; |
| 550 |
|
| 551 |
default-brightness-level = <224>; |
| 552 |
brightness-levels = |
| 553 |
< 0 1 2 3 4 5 6 7 |
| 554 |
8 9 10 11 12 13 14 15 |
| 555 |
16 17 18 19 20 21 22 23 |
| 556 |
24 25 26 27 28 29 30 31 |
| 557 |
32 33 34 35 36 37 38 39 |
| 558 |
40 41 42 43 44 45 46 47 |
| 559 |
48 49 50 51 52 53 54 55 |
| 560 |
56 57 58 59 60 61 62 63 |
| 561 |
64 65 66 67 68 69 70 71 |
| 562 |
72 73 74 75 76 77 78 79 |
| 563 |
80 81 82 83 84 85 86 87 |
| 564 |
88 89 90 91 92 93 94 95 |
| 565 |
96 97 98 99 100 101 102 103 |
| 566 |
104 105 106 107 108 109 110 111 |
| 567 |
112 113 114 115 116 117 118 119 |
| 568 |
120 121 122 123 124 125 126 127 |
| 569 |
128 129 130 131 132 133 134 135 |
| 570 |
136 137 138 139 140 141 142 143 |
| 571 |
144 145 146 147 148 149 150 151 |
| 572 |
152 153 154 155 156 157 158 159 |
| 573 |
160 161 162 163 164 165 166 167 |
| 574 |
168 169 170 171 172 173 174 175 |
| 575 |
176 177 178 179 180 181 182 183 |
| 576 |
184 185 186 187 188 189 190 191 |
| 577 |
192 193 194 195 196 197 198 199 |
| 578 |
200 201 202 203 204 205 206 207 |
| 579 |
208 209 210 211 212 213 214 215 |
| 580 |
216 217 218 219 220 221 222 223 |
| 581 |
224 225 226 227 228 229 230 231 |
| 582 |
232 233 234 235 236 237 238 239 |
| 583 |
240 241 242 243 244 245 246 247 |
| 584 |
248 249 250 251 252 253 254 255 |
| 585 |
256>; |
| 586 |
}; |
| 587 |
|
| 588 |
clk32k_in: clock-32k { |
| 589 |
compatible = "fixed-clock"; |
| 590 |
clock-frequency = <32768>; |
| 591 |
#clock-cells = <0>; |
| 592 |
}; |
| 593 |
|
| 594 |
cpus { |
| 595 |
cpu0: cpu@0 { |
| 596 |
#cooling-cells = <2>; |
| 597 |
vdd-cpu-supply = <&vdd_cpu>; |
| 598 |
}; |
| 599 |
|
| 600 |
cpu1: cpu@1 { |
| 601 |
#cooling-cells = <2>; |
| 602 |
}; |
| 603 |
|
| 604 |
cpu2: cpu@2 { |
| 605 |
#cooling-cells = <2>; |
| 606 |
}; |
| 607 |
|
| 608 |
cpu3: cpu@3 { |
| 609 |
#cooling-cells = <2>; |
| 610 |
}; |
| 611 |
}; |
| 612 |
|
| 613 |
gpio-keys { |
| 614 |
compatible = "gpio-keys"; |
| 615 |
|
| 616 |
key-power { |
| 617 |
label = "Power"; |
| 618 |
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; |
| 619 |
linux,code = <KEY_POWER>; |
| 620 |
debounce-interval = <30>; |
| 621 |
wakeup-source; |
| 622 |
}; |
| 623 |
|
| 624 |
switch-lid { |
| 625 |
label = "Lid"; |
| 626 |
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; |
| 627 |
linux,input-type = <5>; |
| 628 |
linux,code = <KEY_RESERVED>; |
| 629 |
debounce-interval = <1>; |
| 630 |
wakeup-source; |
| 631 |
}; |
| 632 |
}; |
| 633 |
|
| 634 |
gpio-restart { |
| 635 |
compatible = "gpio-restart"; |
| 636 |
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; |
| 637 |
priority = <200>; |
| 638 |
}; |
| 639 |
|
| 640 |
sdhci0_pwrseq: pwrseq-sdhci0 { |
| 641 |
compatible = "mmc-pwrseq-simple"; |
| 642 |
|
| 643 |
reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; |
| 644 |
}; |
| 645 |
|
| 646 |
vdd_mux: regulator-mux { |
| 647 |
compatible = "regulator-fixed"; |
| 648 |
regulator-name = "+VDD_MUX"; |
| 649 |
regulator-min-microvolt = <12000000>; |
| 650 |
regulator-max-microvolt = <12000000>; |
| 651 |
regulator-always-on; |
| 652 |
regulator-boot-on; |
| 653 |
}; |
| 654 |
|
| 655 |
vdd_5v0_sys: regulator-5v0sys { |
| 656 |
compatible = "regulator-fixed"; |
| 657 |
regulator-name = "+5V_SYS"; |
| 658 |
regulator-min-microvolt = <5000000>; |
| 659 |
regulator-max-microvolt = <5000000>; |
| 660 |
regulator-always-on; |
| 661 |
regulator-boot-on; |
| 662 |
vin-supply = <&vdd_mux>; |
| 663 |
}; |
| 664 |
|
| 665 |
vdd_3v3_sys: regulator-3v3sys { |
| 666 |
compatible = "regulator-fixed"; |
| 667 |
regulator-name = "+3.3V_SYS"; |
| 668 |
regulator-min-microvolt = <3300000>; |
| 669 |
regulator-max-microvolt = <3300000>; |
| 670 |
regulator-always-on; |
| 671 |
regulator-boot-on; |
| 672 |
vin-supply = <&vdd_mux>; |
| 673 |
}; |
| 674 |
|
| 675 |
vdd_3v3_run: regulator-3v3run { |
| 676 |
compatible = "regulator-fixed"; |
| 677 |
regulator-name = "+3.3V_RUN"; |
| 678 |
regulator-min-microvolt = <3300000>; |
| 679 |
regulator-max-microvolt = <3300000>; |
| 680 |
regulator-always-on; |
| 681 |
regulator-boot-on; |
| 682 |
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; |
| 683 |
enable-active-high; |
| 684 |
vin-supply = <&vdd_3v3_sys>; |
| 685 |
}; |
| 686 |
|
| 687 |
vdd_3v3_hdmi: regulator-3v3hdmi { |
| 688 |
compatible = "regulator-fixed"; |
| 689 |
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; |
| 690 |
regulator-min-microvolt = <3300000>; |
| 691 |
regulator-max-microvolt = <3300000>; |
| 692 |
vin-supply = <&vdd_3v3_run>; |
| 693 |
}; |
| 694 |
|
| 695 |
vdd_led: regulator-led { |
| 696 |
compatible = "regulator-fixed"; |
| 697 |
regulator-name = "+VDD_LED"; |
| 698 |
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; |
| 699 |
enable-active-high; |
| 700 |
vin-supply = <&vdd_mux>; |
| 701 |
}; |
| 702 |
|
| 703 |
vdd_5v0_ts: regulator-ts { |
| 704 |
compatible = "regulator-fixed"; |
| 705 |
regulator-name = "+5V_VDD_TS_SW"; |
| 706 |
regulator-min-microvolt = <5000000>; |
| 707 |
regulator-max-microvolt = <5000000>; |
| 708 |
regulator-boot-on; |
| 709 |
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; |
| 710 |
enable-active-high; |
| 711 |
vin-supply = <&vdd_5v0_sys>; |
| 712 |
}; |
| 713 |
|
| 714 |
vdd_usb1_vbus: regulator-usb1 { |
| 715 |
compatible = "regulator-fixed"; |
| 716 |
regulator-name = "+5V_USB_HS"; |
| 717 |
regulator-min-microvolt = <5000000>; |
| 718 |
regulator-max-microvolt = <5000000>; |
| 719 |
regulator-boot-on; |
| 720 |
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; |
| 721 |
enable-active-high; |
| 722 |
gpio-open-drain; |
| 723 |
vin-supply = <&vdd_5v0_sys>; |
| 724 |
}; |
| 725 |
|
| 726 |
vdd_usb3_vbus: regulator-usb3 { |
| 727 |
compatible = "regulator-fixed"; |
| 728 |
regulator-name = "+5V_USB_SS"; |
| 729 |
regulator-min-microvolt = <5000000>; |
| 730 |
regulator-max-microvolt = <5000000>; |
| 731 |
regulator-boot-on; |
| 732 |
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; |
| 733 |
enable-active-high; |
| 734 |
gpio-open-drain; |
| 735 |
vin-supply = <&vdd_5v0_sys>; |
| 736 |
}; |
| 737 |
|
| 738 |
vdd_3v3_panel: regulator-panel { |
| 739 |
compatible = "regulator-fixed"; |
| 740 |
regulator-name = "+3.3V_PANEL"; |
| 741 |
regulator-min-microvolt = <3300000>; |
| 742 |
regulator-max-microvolt = <3300000>; |
| 743 |
gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; |
| 744 |
enable-active-high; |
| 745 |
vin-supply = <&vdd_3v3_run>; |
| 746 |
}; |
| 747 |
|
| 748 |
vdd_3v3_lp0: regulator-lp0 { |
| 749 |
compatible = "regulator-fixed"; |
| 750 |
regulator-name = "+3.3V_LP0"; |
| 751 |
regulator-min-microvolt = <3300000>; |
| 752 |
regulator-max-microvolt = <3300000>; |
| 753 |
/* |
| 754 |
* TODO: find a way to wire this up with the USB EHCI |
| 755 |
* controllers so that it can be enabled on demand. |
| 756 |
*/ |
| 757 |
regulator-always-on; |
| 758 |
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; |
| 759 |
enable-active-high; |
| 760 |
vin-supply = <&vdd_3v3_sys>; |
| 761 |
}; |
| 762 |
|
| 763 |
vdd_hdmi_pll: regulator-hdmipll { |
| 764 |
compatible = "regulator-fixed"; |
| 765 |
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; |
| 766 |
regulator-min-microvolt = <1050000>; |
| 767 |
regulator-max-microvolt = <1050000>; |
| 768 |
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; |
| 769 |
vin-supply = <&vdd_1v05_run>; |
| 770 |
}; |
| 771 |
|
| 772 |
vdd_5v0_hdmi: regulator-hdmicon { |
| 773 |
compatible = "regulator-fixed"; |
| 774 |
regulator-name = "+5V_HDMI_CON"; |
| 775 |
regulator-min-microvolt = <5000000>; |
| 776 |
regulator-max-microvolt = <5000000>; |
| 777 |
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; |
| 778 |
enable-active-high; |
| 779 |
vin-supply = <&vdd_5v0_sys>; |
| 780 |
}; |
| 781 |
|
| 782 |
sound { |
| 783 |
nvidia,audio-routing = |
| 784 |
"Headphones", "HPR", |
| 785 |
"Headphones", "HPL", |
| 786 |
"Speakers", "SPKR", |
| 787 |
"Speakers", "SPKL", |
| 788 |
"Mic Jack", "MICBIAS", |
| 789 |
"DMICL", "Int Mic", |
| 790 |
"DMICR", "Int Mic", |
| 791 |
"IN34", "Mic Jack"; |
| 792 |
|
| 793 |
nvidia,i2s-controller = <&tegra_i2s1>; |
| 794 |
nvidia,audio-codec = <&acodec>; |
| 795 |
|
| 796 |
clocks = <&tegra_car TEGRA124_CLK_PLL_A>, |
| 797 |
<&tegra_car TEGRA124_CLK_PLL_A_OUT0>, |
| 798 |
<&tegra_pmc TEGRA_PMC_CLK_OUT_1>; |
| 799 |
clock-names = "pll_a", "pll_a_out0", "mclk"; |
| 800 |
|
| 801 |
assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, |
| 802 |
<&tegra_pmc TEGRA_PMC_CLK_OUT_1>; |
| 803 |
|
| 804 |
assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, |
| 805 |
<&tegra_car TEGRA124_CLK_EXTERN1>; |
| 806 |
|
| 807 |
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; |
| 808 |
nvidia,mic-det-gpios = |
| 809 |
<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; |
| 810 |
}; |
| 811 |
|
| 812 |
thermal-zones { |
| 813 |
cpu-skin-thermal { |
| 814 |
polling-delay-passive = <1000>; /* milliseconds */ |
| 815 |
polling-delay = <5000>; /* milliseconds */ |
| 816 |
|
| 817 |
thermal-sensors = <&tmp451 0>; |
| 818 |
|
| 819 |
trips { |
| 820 |
cpu_passive_trip: cpu-alert0 { |
| 821 |
/* throttle at 70C until temperature drops to 69.8C */ |
| 822 |
temperature = <70000>; |
| 823 |
hysteresis = <200>; |
| 824 |
type = "passive"; |
| 825 |
}; |
| 826 |
}; |
| 827 |
|
| 828 |
cooling-maps { |
| 829 |
map0 { |
| 830 |
trip = <&cpu_passive_trip>; |
| 831 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 832 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 833 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 834 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 835 |
}; |
| 836 |
}; |
| 837 |
}; |
| 838 |
}; |
| 839 |
}; |
| 840 |
|
| 841 |
#include "../cros-ec-keyboard.dtsi" |