| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR X11) |
| 2 |
/* |
| 3 |
* Copyright (C) 2015 Marek Vasut <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "socfpga_cyclone5.dtsi" |
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "samtec VIN|ING FPGA"; |
| 12 |
compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga"; |
| 13 |
|
| 14 |
chosen { |
| 15 |
bootargs = "earlyprintk"; |
| 16 |
stdout-path = "serial0:115200n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@0 { |
| 20 |
name = "memory"; |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x0 0x40000000>; /* 1GB */ |
| 23 |
}; |
| 24 |
|
| 25 |
aliases { |
| 26 |
/* |
| 27 |
* This allow the ethaddr uboot environment variable contents |
| 28 |
* to be added to the gmac1 device tree blob. |
| 29 |
*/ |
| 30 |
ethernet0 = &gmac1; |
| 31 |
ethernet1 = &gmac0; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio-keys { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
|
| 37 |
hps_temp0 { |
| 38 |
label = "BTN_0"; /* TEMP_OS */ |
| 39 |
gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPI5 */ |
| 40 |
linux,code = <BTN_0>; |
| 41 |
}; |
| 42 |
|
| 43 |
hps_hkey0 { |
| 44 |
label = "GP_SWITCH"; /* GP_SWITCH */ |
| 45 |
gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPI6 */ |
| 46 |
linux,code = <BTN_1>; |
| 47 |
}; |
| 48 |
|
| 49 |
hps_hkey1 { |
| 50 |
label = "RESET_SWITCH"; /* RESET_SWITCH */ |
| 51 |
gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPI7 */ |
| 52 |
linux,code = <BTN_2>; |
| 53 |
}; |
| 54 |
|
| 55 |
hps_hkey2 { |
| 56 |
label = "POWER_DOWN"; /* POWER_DOWN */ |
| 57 |
gpios = <&portc 4 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ |
| 58 |
linux,code = <KEY_POWER>; |
| 59 |
}; |
| 60 |
|
| 61 |
hps_hkey3 { |
| 62 |
label = "SENSE"; /* SENSE */ |
| 63 |
gpios = <&porta 9 GPIO_ACTIVE_LOW>; /* HPS_GPIO9 */ |
| 64 |
linux,code = <BTN_3>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
regulator-usb-nrst { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
regulator-name = "usb_nrst"; |
| 71 |
regulator-min-microvolt = <5000000>; |
| 72 |
regulator-max-microvolt = <5000000>; |
| 73 |
gpio = <&portb 5 GPIO_ACTIVE_HIGH>; |
| 74 |
startup-delay-us = <70000>; |
| 75 |
enable-active-high; |
| 76 |
regulator-always-on; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
&gmac1 { |
| 81 |
status = "okay"; |
| 82 |
phy-mode = "rgmii"; |
| 83 |
phy-handle = <&phy1>; |
| 84 |
|
| 85 |
snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>; |
| 86 |
snps,reset-active-low; |
| 87 |
snps,reset-delays-us = <10000 10000 10000>; |
| 88 |
|
| 89 |
mdio0 { |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <0>; |
| 92 |
compatible = "snps,dwmac-mdio"; |
| 93 |
phy1: ethernet-phy@1 { |
| 94 |
reg = <1>; |
| 95 |
rxd0-skew-ps = <0>; |
| 96 |
rxd1-skew-ps = <0>; |
| 97 |
rxd2-skew-ps = <0>; |
| 98 |
rxd3-skew-ps = <0>; |
| 99 |
txd0-skew-ps = <0>; |
| 100 |
txd1-skew-ps = <0>; |
| 101 |
txd2-skew-ps = <0>; |
| 102 |
txd3-skew-ps = <0>; |
| 103 |
txen-skew-ps = <0>; |
| 104 |
txc-skew-ps = <1860>; |
| 105 |
rxdv-skew-ps = <0>; |
| 106 |
rxc-skew-ps = <1860>; |
| 107 |
}; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&gpio0 { /* GPIO 0..29 */ |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
&gpio1 { /* GPIO 30..57 */ |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */ |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&i2c0 { |
| 124 |
status = "okay"; |
| 125 |
|
| 126 |
gpio: pca9557@1f { |
| 127 |
compatible = "nxp,pca9557"; |
| 128 |
reg = <0x1f>; |
| 129 |
gpio-controller; |
| 130 |
#gpio-cells = <2>; |
| 131 |
}; |
| 132 |
|
| 133 |
temp: temperature-sensor@48 { |
| 134 |
compatible = "national,lm75"; |
| 135 |
reg = <0x48>; |
| 136 |
}; |
| 137 |
|
| 138 |
eeprom@50 { |
| 139 |
compatible = "atmel,24c01"; |
| 140 |
pagesize = <8>; |
| 141 |
reg = <0x50>; |
| 142 |
}; |
| 143 |
|
| 144 |
i2c-mux@70 { |
| 145 |
compatible = "nxp,pca9548"; |
| 146 |
#address-cells = <1>; |
| 147 |
#size-cells = <0>; |
| 148 |
reg = <0x70>; |
| 149 |
|
| 150 |
i2c@0 { |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <0>; |
| 153 |
reg = <0>; |
| 154 |
}; |
| 155 |
|
| 156 |
i2c@1 { |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
reg = <1>; |
| 160 |
}; |
| 161 |
|
| 162 |
i2c@2 { |
| 163 |
#address-cells = <1>; |
| 164 |
#size-cells = <0>; |
| 165 |
reg = <2>; |
| 166 |
}; |
| 167 |
|
| 168 |
i2c@3 { |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <0>; |
| 171 |
reg = <3>; |
| 172 |
}; |
| 173 |
|
| 174 |
i2c@4 { |
| 175 |
#address-cells = <1>; |
| 176 |
#size-cells = <0>; |
| 177 |
reg = <4>; |
| 178 |
}; |
| 179 |
|
| 180 |
i2c@5 { |
| 181 |
#address-cells = <1>; |
| 182 |
#size-cells = <0>; |
| 183 |
reg = <5>; |
| 184 |
}; |
| 185 |
|
| 186 |
i2c@6 { /* Backplane EEPROM */ |
| 187 |
#address-cells = <1>; |
| 188 |
#size-cells = <0>; |
| 189 |
reg = <6>; |
| 190 |
eeprom@51 { |
| 191 |
compatible = "atmel,24c01"; |
| 192 |
pagesize = <8>; |
| 193 |
reg = <0x51>; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
i2c@7 { /* Power board EEPROM */ |
| 198 |
#address-cells = <1>; |
| 199 |
#size-cells = <0>; |
| 200 |
reg = <7>; |
| 201 |
eeprom@51 { |
| 202 |
compatible = "atmel,24c01"; |
| 203 |
pagesize = <8>; |
| 204 |
reg = <0x51>; |
| 205 |
}; |
| 206 |
}; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&i2c1 { |
| 211 |
status = "okay"; |
| 212 |
clock-frequency = <100000>; |
| 213 |
|
| 214 |
eeprom@50 { |
| 215 |
compatible = "atmel,24c02"; |
| 216 |
pagesize = <8>; |
| 217 |
reg = <0x50>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
&qspi { |
| 222 |
status = "okay"; |
| 223 |
|
| 224 |
flash@0 { |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <1>; |
| 227 |
compatible = "micron,n25q128", "jedec,spi-nor"; |
| 228 |
reg = <0>; /* chip select */ |
| 229 |
spi-max-frequency = <100000000>; |
| 230 |
m25p,fast-read; |
| 231 |
|
| 232 |
cdns,read-delay = <4>; |
| 233 |
cdns,tshsl-ns = <50>; |
| 234 |
cdns,tsd2d-ns = <50>; |
| 235 |
cdns,tchsh-ns = <4>; |
| 236 |
cdns,tslch-ns = <4>; |
| 237 |
}; |
| 238 |
|
| 239 |
flash@1 { |
| 240 |
#address-cells = <1>; |
| 241 |
#size-cells = <1>; |
| 242 |
compatible = "micron,mt25qu02g", "jedec,spi-nor"; |
| 243 |
reg = <1>; /* chip select */ |
| 244 |
spi-max-frequency = <100000000>; |
| 245 |
m25p,fast-read; |
| 246 |
|
| 247 |
cdns,read-delay = <4>; |
| 248 |
cdns,tshsl-ns = <50>; |
| 249 |
cdns,tsd2d-ns = <50>; |
| 250 |
cdns,tchsh-ns = <4>; |
| 251 |
cdns,tslch-ns = <4>; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
&usb0 { |
| 256 |
dr_mode = "host"; |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&usb1 { |
| 261 |
dr_mode = "peripheral"; |
| 262 |
status = "okay"; |
| 263 |
}; |