Debian Codegraph @

arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 /*
3 * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
4 */
5
6 #include "socfpga_cyclone5.dtsi"
7
8 / {
9 model = "Enclustra Mercury SA1";
10 compatible = "altr,socfpga-cyclone5", "altr,socfpga";
11
12 chosen {
13 stdout-path = "serial0:115200n8";
14 };
15
16 aliases {
17 ethernet0 = &gmac1;
18 };
19
20 /* Adjusted the i2c labels to use generic base-board dtsi files for
21 * Enclustra Arria10 and Cyclone5 SoMs.
22 *
23 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
24 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
25 * fragments. Thus define generic labels here to match the correct i2c
26 * bus in a generic base-board .dtsi file.
27 */
28 soc {
29 i2c_encl: i2c@ffc04000 {
30 };
31 i2c_encl_fpga: i2c@ffc05000 {
32 };
33 };
34
35 memory {
36 name = "memory";
37 device_type = "memory";
38 reg = <0x0 0x40000000>; /* 1GB */
39 };
40 };
41
42 &osc1 {
43 clock-frequency = <50000000>;
44 };
45
46 &i2c_encl {
47 i2c-sda-hold-time-ns = <300>;
48 clock-frequency = <100000>;
49 status = "okay";
50
51 isl12020: rtc@6f {
52 compatible = "isil,isl12022";
53 reg = <0x6f>;
54 };
55 };
56
57 &i2c_encl_fpga {
58 i2c-sda-hold-time-ns = <300>;
59 status = "disabled";
60 };
61
62 &uart0 {
63 clock-frequency = <100000000>;
64 };
65
66 &mmc0 {
67 status = "okay";
68 /delete-property/ cap-mmc-highspeed;
69 /delete-property/ cap-sd-highspeed;
70 };
71
72 &qspi {
73 status = "okay";
74
75 flash0: flash@0 {
76 u-boot,dm-pre-reloc;
77 #address-cells = <1>;
78 #size-cells = <1>;
79 compatible = "jedec,spi-nor";
80 reg = <0>;
81
82 spi-rx-bus-width = <4>;
83 spi-tx-bus-width = <4>;
84 spi-max-frequency = <10000000>;
85
86 cdns,read-delay = <4>;
87 cdns,tshsl-ns = <50>;
88 cdns,tsd2d-ns = <50>;
89 cdns,tchsh-ns = <4>;
90 cdns,tslch-ns = <4>;
91
92 partition@raw {
93 label = "Flash Raw";
94 reg = <0x0 0x4000000>;
95 };
96 };
97 };
98
99 &gpio0 {
100 status = "okay";
101 };
102
103 &gpio1 {
104 status = "okay";
105 };
106
107 &gmac1 {
108 status = "okay";
109 /delete-property/ mac-address;
110 phy-mode = "rgmii-id";
111 phy-handle = <&phy3>;
112
113 mdio0 {
114 #address-cells = <1>;
115 #size-cells = <0>;
116 compatible = "snps,dwmac-mdio";
117
118 phy3: ethernet-phy@3 {
119 reg = <3>;
120
121 /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
122 rxc-skew-ps = <1680>;
123 rxd0-skew-ps = <420>;
124 rxd1-skew-ps = <420>;
125 rxd2-skew-ps = <420>;
126 rxd3-skew-ps = <420>;
127 rxdv-skew-ps = <420>;
128
129 /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
130 txc-skew-ps = <1860>;
131 txd0-skew-ps = <0>;
132 txd1-skew-ps = <0>;
133 txd2-skew-ps = <0>;
134 txd3-skew-ps = <0>;
135 txen-skew-ps = <0>;
136 };
137 };
138 };
139
140 &usb1 {
141 status = "okay";
142 dr_mode = "host";
143 };