| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Copyright (C) 2017, Intel Corporation |
| 4 |
* |
| 5 |
* based on socfpga_cyclone5_de0_nano_soc.dts |
| 6 |
*/ |
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "socfpga_cyclone5.dtsi" |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Terasic DE10-Nano"; |
| 15 |
compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga"; |
| 16 |
|
| 17 |
chosen { |
| 18 |
stdout-path = "serial0:115200n8"; |
| 19 |
}; |
| 20 |
|
| 21 |
memory@0 { |
| 22 |
/* 1 GiB */ |
| 23 |
device_type = "memory"; |
| 24 |
reg = <0x0 0x40000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
soc { |
| 28 |
fpga: bus@ff200000 { |
| 29 |
compatible = "simple-bus"; |
| 30 |
reg = <0xff200000 0x00200000>; |
| 31 |
ranges = <0x00000000 0xff200000 0x00200000>; |
| 32 |
#address-cells = <1>; |
| 33 |
#size-cells = <1>; |
| 34 |
|
| 35 |
/* |
| 36 |
* Here the devices will appear if an FPGA image is |
| 37 |
* loaded. Their description is expected to be added |
| 38 |
* using a device tree overlay that matches the image. |
| 39 |
*/ |
| 40 |
}; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
&gmac1 { |
| 45 |
/* Uses a KSZ9031RNX phy */ |
| 46 |
phy-mode = "rgmii-id"; |
| 47 |
rxd0-skew-ps = <420>; |
| 48 |
rxd1-skew-ps = <420>; |
| 49 |
rxd2-skew-ps = <420>; |
| 50 |
rxd3-skew-ps = <420>; |
| 51 |
txen-skew-ps = <0>; |
| 52 |
rxdv-skew-ps = <420>; |
| 53 |
status = "okay"; |
| 54 |
}; |
| 55 |
|
| 56 |
&gpio0 { |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
&gpio1 { |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
&gpio2 { |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
|
| 68 |
&i2c0 { |
| 69 |
clock-frequency = <100000>; |
| 70 |
status = "okay"; |
| 71 |
|
| 72 |
accelerometer@53 { |
| 73 |
compatible = "adi,adxl345"; |
| 74 |
reg = <0x53>; |
| 75 |
/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */ |
| 76 |
interrupt-parent = <&portc>; |
| 77 |
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; |
| 78 |
interrupt-names = "INT1"; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
&mmc0 { |
| 83 |
/* micro SD card socket J11 */ |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
&uart0 { |
| 88 |
/* |
| 89 |
* Accessible via USB (FT232R) on Mini-USB plug J4 |
| 90 |
* RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49 |
| 91 |
* TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50 |
| 92 |
* no handshaking lines |
| 93 |
*/ |
| 94 |
clock-frequency = <100000000>; |
| 95 |
}; |