Debian Codegraph @

arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 /*
3 * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
4 */
5
6 #include "socfpga_cyclone5.dtsi"
7
8 / {
9 model = "Enclustra Mercury+ SA2";
10 compatible = "altr,socfpga-cyclone5", "altr,socfpga";
11
12 chosen {
13 stdout-path = "serial0:115200n8";
14 };
15
16 aliases {
17 ethernet0 = &gmac1;
18 };
19
20 /* Adjusted the i2c labels to use generic base-board dtsi files for
21 * Enclustra Arria10 and Cyclone5 SoMs.
22 *
23 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
24 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
25 * fragments. Thus define generic labels here to match the correct i2c
26 * bus in a generic base-board .dtsi file.
27 */
28 soc {
29 i2c_encl: i2c@ffc04000 {
30 };
31 i2c_encl_fpga: i2c@ffc05000 {
32 };
33 };
34
35 memory {
36 name = "memory";
37 device_type = "memory";
38 reg = <0x0 0x80000000>; /* 2GB */
39 };
40 };
41
42 &osc1 {
43 clock-frequency = <50000000>;
44 };
45
46 &i2c_encl {
47 i2c-sda-hold-time-ns = <300>;
48 clock-frequency = <100000>;
49 status = "okay";
50
51 isl12020: rtc@6f {
52 compatible = "isil,isl12022";
53 reg = <0x6f>;
54 };
55
56 atsha204a: crypto@64 {
57 compatible = "atmel,atsha204a";
58 reg = <0x64>;
59 };
60 };
61
62 &i2c_encl_fpga {
63 i2c-sda-hold-time-ns = <300>;
64 status = "disabled";
65 };
66
67 &uart0 {
68 clock-frequency = <100000000>;
69 };
70
71 &mmc0 {
72 status = "okay";
73 };
74
75 &qspi {
76 status = "okay";
77
78 flash0: flash@0 {
79 u-boot,dm-pre-reloc;
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "jedec,spi-nor";
83 reg = <0>;
84
85 spi-rx-bus-width = <4>;
86 spi-tx-bus-width = <4>;
87 spi-max-frequency = <10000000>;
88
89 cdns,read-delay = <4>;
90 cdns,tshsl-ns = <50>;
91 cdns,tsd2d-ns = <50>;
92 cdns,tchsh-ns = <4>;
93 cdns,tslch-ns = <4>;
94
95 partition@raw {
96 label = "Flash Raw";
97 reg = <0x0 0x4000000>;
98 };
99 };
100 };
101
102 &gpio0 {
103 status = "okay";
104 };
105
106 &gpio1 {
107 status = "okay";
108 };
109
110 &gmac1 {
111 status = "okay";
112 /delete-property/ mac-address;
113 phy-mode = "rgmii-id";
114 phy-handle = <&phy3>;
115
116 mdio0 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 compatible = "snps,dwmac-mdio";
120
121 phy3: ethernet-phy@3 {
122 reg = <3>;
123
124 /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
125 rxc-skew-ps = <1680>;
126 rxd0-skew-ps = <420>;
127 rxd1-skew-ps = <420>;
128 rxd2-skew-ps = <420>;
129 rxd3-skew-ps = <420>;
130 rxdv-skew-ps = <420>;
131
132 /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
133 txc-skew-ps = <1860>;
134 txd0-skew-ps = <0>;
135 txd1-skew-ps = <0>;
136 txd2-skew-ps = <0>;
137 txd3-skew-ps = <0>;
138 txen-skew-ps = <0>;
139 };
140 };
141 };
142
143 &usb1 {
144 status = "okay";
145 dr_mode = "host";
146 };