| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree file for Cortina systems Gemini SoC |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 7 |
#include <dt-bindings/clock/cortina,gemini-clock.h> |
| 8 |
#include <dt-bindings/reset/cortina,gemini-reset.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
soc { |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
ranges; |
| 16 |
compatible = "simple-bus"; |
| 17 |
interrupt-parent = <&intcon>; |
| 18 |
|
| 19 |
flash: flash@30000000 { |
| 20 |
compatible = "cortina,gemini-flash", "cfi-flash"; |
| 21 |
syscon = <&syscon>; |
| 22 |
pinctrl-names = "default"; |
| 23 |
pinctrl-0 = <&pflash_default_pins>; |
| 24 |
bank-width = <2>; |
| 25 |
status = "disabled"; |
| 26 |
}; |
| 27 |
|
| 28 |
syscon: syscon@40000000 { |
| 29 |
compatible = "cortina,gemini-syscon", |
| 30 |
"syscon", "simple-mfd"; |
| 31 |
reg = <0x40000000 0x1000>; |
| 32 |
#clock-cells = <1>; |
| 33 |
#reset-cells = <1>; |
| 34 |
|
| 35 |
syscon-reboot { |
| 36 |
compatible = "syscon-reboot"; |
| 37 |
regmap = <&syscon>; |
| 38 |
/* GLOBAL_RESET register */ |
| 39 |
offset = <0x0c>; |
| 40 |
/* RESET_GLOBAL | RESET_CPU1 */ |
| 41 |
mask = <0xC0000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
pinctrl { |
| 45 |
compatible = "cortina,gemini-pinctrl"; |
| 46 |
regmap = <&syscon>; |
| 47 |
/* Hog the DRAM pins */ |
| 48 |
pinctrl-names = "default"; |
| 49 |
pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, |
| 50 |
<&vcontrol_default_pins>; |
| 51 |
|
| 52 |
dram_default_pins: pinctrl-dram { |
| 53 |
mux { |
| 54 |
function = "dram"; |
| 55 |
groups = "dramgrp"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
rtc_default_pins: pinctrl-rtc { |
| 59 |
mux { |
| 60 |
function = "rtc"; |
| 61 |
groups = "rtcgrp"; |
| 62 |
}; |
| 63 |
}; |
| 64 |
power_default_pins: pinctrl-power { |
| 65 |
mux { |
| 66 |
function = "power"; |
| 67 |
groups = "powergrp"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
cir_default_pins: pinctrl-cir { |
| 71 |
mux { |
| 72 |
function = "cir"; |
| 73 |
groups = "cirgrp"; |
| 74 |
}; |
| 75 |
}; |
| 76 |
system_default_pins: pinctrl-system { |
| 77 |
mux { |
| 78 |
function = "system"; |
| 79 |
groups = "systemgrp"; |
| 80 |
}; |
| 81 |
}; |
| 82 |
vcontrol_default_pins: pinctrl-vcontrol { |
| 83 |
mux { |
| 84 |
function = "vcontrol"; |
| 85 |
groups = "vcontrolgrp"; |
| 86 |
}; |
| 87 |
}; |
| 88 |
ice_default_pins: pinctrl-ice { |
| 89 |
mux { |
| 90 |
function = "ice"; |
| 91 |
groups = "icegrp"; |
| 92 |
}; |
| 93 |
}; |
| 94 |
uart_default_pins: pinctrl-uart { |
| 95 |
mux { |
| 96 |
function = "uart"; |
| 97 |
groups = "uartrxtxgrp"; |
| 98 |
}; |
| 99 |
}; |
| 100 |
pflash_default_pins: pinctrl-pflash { |
| 101 |
mux { |
| 102 |
function = "pflash"; |
| 103 |
groups = "pflashgrp"; |
| 104 |
}; |
| 105 |
}; |
| 106 |
usb_default_pins: pinctrl-usb { |
| 107 |
mux { |
| 108 |
function = "usb"; |
| 109 |
groups = "usbgrp"; |
| 110 |
}; |
| 111 |
}; |
| 112 |
gmii_default_pins: pinctrl-gmii { |
| 113 |
/* |
| 114 |
* Only activate GMAC0 by default since |
| 115 |
* GMAC1 will overlap with 8 GPIO lines |
| 116 |
* gpio2a, gpio2b. Overlay groups with |
| 117 |
* "gmii_gmac0_grp", "gmii_gmac1_grp" for |
| 118 |
* both ethernet interfaces. |
| 119 |
*/ |
| 120 |
mux { |
| 121 |
function = "gmii"; |
| 122 |
groups = "gmii_gmac0_grp"; |
| 123 |
}; |
| 124 |
}; |
| 125 |
pci_default_pins: pinctrl-pci { |
| 126 |
mux { |
| 127 |
function = "pci"; |
| 128 |
groups = "pcigrp"; |
| 129 |
}; |
| 130 |
}; |
| 131 |
sata_default_pins: pinctrl-sata { |
| 132 |
mux { |
| 133 |
function = "sata"; |
| 134 |
groups = "satagrp"; |
| 135 |
}; |
| 136 |
}; |
| 137 |
/* Activate both groups of pins for this state */ |
| 138 |
sata_and_ide_pins: pinctrl-sata-ide { |
| 139 |
mux0 { |
| 140 |
function = "sata"; |
| 141 |
groups = "satagrp"; |
| 142 |
}; |
| 143 |
mux1 { |
| 144 |
function = "ide"; |
| 145 |
groups = "idegrp"; |
| 146 |
}; |
| 147 |
}; |
| 148 |
tvc_default_pins: pinctrl-tvc { |
| 149 |
mux { |
| 150 |
function = "tvc"; |
| 151 |
groups = "tvcgrp"; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
watchdog@41000000 { |
| 158 |
compatible = "cortina,gemini-watchdog", "faraday,ftwdt010"; |
| 159 |
reg = <0x41000000 0x1000>; |
| 160 |
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; |
| 161 |
resets = <&syscon GEMINI_RESET_WDOG>; |
| 162 |
clocks = <&syscon GEMINI_CLK_APB>; |
| 163 |
clock-names = "PCLK"; |
| 164 |
}; |
| 165 |
|
| 166 |
uart0: serial@42000000 { |
| 167 |
compatible = "ns16550a"; |
| 168 |
reg = <0x42000000 0x100>; |
| 169 |
resets = <&syscon GEMINI_RESET_UART>; |
| 170 |
clocks = <&syscon GEMINI_CLK_UART>; |
| 171 |
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; |
| 172 |
pinctrl-names = "default"; |
| 173 |
pinctrl-0 = <&uart_default_pins>; |
| 174 |
reg-shift = <2>; |
| 175 |
}; |
| 176 |
|
| 177 |
timer@43000000 { |
| 178 |
compatible = "faraday,fttmr010"; |
| 179 |
reg = <0x43000000 0x1000>; |
| 180 |
interrupt-parent = <&intcon>; |
| 181 |
interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ |
| 182 |
<15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ |
| 183 |
<16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ |
| 184 |
resets = <&syscon GEMINI_RESET_TIMER>; |
| 185 |
/* APB clock or RTC clock */ |
| 186 |
clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; |
| 187 |
clock-names = "PCLK", "EXTCLK"; |
| 188 |
syscon = <&syscon>; |
| 189 |
}; |
| 190 |
|
| 191 |
rtc@45000000 { |
| 192 |
compatible = "cortina,gemini-rtc", "faraday,ftrtc010"; |
| 193 |
reg = <0x45000000 0x100>; |
| 194 |
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; |
| 195 |
resets = <&syscon GEMINI_RESET_RTC>; |
| 196 |
clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; |
| 197 |
clock-names = "PCLK", "EXTCLK"; |
| 198 |
pinctrl-names = "default"; |
| 199 |
pinctrl-0 = <&rtc_default_pins>; |
| 200 |
}; |
| 201 |
|
| 202 |
sata: sata@46000000 { |
| 203 |
compatible = "cortina,gemini-sata-bridge"; |
| 204 |
reg = <0x46000000 0x100>; |
| 205 |
resets = <&syscon GEMINI_RESET_SATA0>, |
| 206 |
<&syscon GEMINI_RESET_SATA1>; |
| 207 |
reset-names = "sata0", "sata1"; |
| 208 |
clocks = <&syscon GEMINI_CLK_GATE_SATA0>, |
| 209 |
<&syscon GEMINI_CLK_GATE_SATA1>; |
| 210 |
clock-names = "SATA0_PCLK", "SATA1_PCLK"; |
| 211 |
/* |
| 212 |
* This defines the special "ide" state that needs |
| 213 |
* to be explicitly enabled to enable the IDE pins, |
| 214 |
* as these pins are normally used for other things. |
| 215 |
*/ |
| 216 |
pinctrl-names = "default", "ide"; |
| 217 |
pinctrl-0 = <&sata_default_pins>; |
| 218 |
pinctrl-1 = <&sata_and_ide_pins>; |
| 219 |
syscon = <&syscon>; |
| 220 |
status = "disabled"; |
| 221 |
}; |
| 222 |
|
| 223 |
intcon: interrupt-controller@48000000 { |
| 224 |
compatible = "faraday,ftintc010"; |
| 225 |
reg = <0x48000000 0x1000>; |
| 226 |
resets = <&syscon GEMINI_RESET_INTCON0>; |
| 227 |
interrupt-controller; |
| 228 |
#interrupt-cells = <2>; |
| 229 |
}; |
| 230 |
|
| 231 |
power-controller@4b000000 { |
| 232 |
compatible = "cortina,gemini-power-controller"; |
| 233 |
reg = <0x4b000000 0x100>; |
| 234 |
interrupts = <26 IRQ_TYPE_EDGE_RISING>; |
| 235 |
pinctrl-names = "default"; |
| 236 |
pinctrl-0 = <&power_default_pins>; |
| 237 |
}; |
| 238 |
|
| 239 |
gpio0: gpio@4d000000 { |
| 240 |
compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; |
| 241 |
reg = <0x4d000000 0x100>; |
| 242 |
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| 243 |
resets = <&syscon GEMINI_RESET_GPIO0>; |
| 244 |
clocks = <&syscon GEMINI_CLK_APB>; |
| 245 |
gpio-controller; |
| 246 |
#gpio-cells = <2>; |
| 247 |
interrupt-controller; |
| 248 |
#interrupt-cells = <2>; |
| 249 |
}; |
| 250 |
|
| 251 |
gpio1: gpio@4e000000 { |
| 252 |
compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; |
| 253 |
reg = <0x4e000000 0x100>; |
| 254 |
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; |
| 255 |
resets = <&syscon GEMINI_RESET_GPIO1>; |
| 256 |
clocks = <&syscon GEMINI_CLK_APB>; |
| 257 |
gpio-controller; |
| 258 |
#gpio-cells = <2>; |
| 259 |
interrupt-controller; |
| 260 |
#interrupt-cells = <2>; |
| 261 |
}; |
| 262 |
|
| 263 |
gpio2: gpio@4f000000 { |
| 264 |
compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; |
| 265 |
reg = <0x4f000000 0x100>; |
| 266 |
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; |
| 267 |
resets = <&syscon GEMINI_RESET_GPIO2>; |
| 268 |
clocks = <&syscon GEMINI_CLK_APB>; |
| 269 |
gpio-controller; |
| 270 |
#gpio-cells = <2>; |
| 271 |
interrupt-controller; |
| 272 |
#interrupt-cells = <2>; |
| 273 |
}; |
| 274 |
|
| 275 |
pci@50000000 { |
| 276 |
compatible = "cortina,gemini-pci", "faraday,ftpci100"; |
| 277 |
/* |
| 278 |
* The first 256 bytes in the IO range is actually used |
| 279 |
* to configure the host bridge. |
| 280 |
*/ |
| 281 |
reg = <0x50000000 0x100>; |
| 282 |
resets = <&syscon GEMINI_RESET_PCI>; |
| 283 |
clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>; |
| 284 |
clock-names = "PCLK", "PCICLK"; |
| 285 |
pinctrl-names = "default"; |
| 286 |
pinctrl-0 = <&pci_default_pins>; |
| 287 |
device_type = "pci"; |
| 288 |
#address-cells = <3>; |
| 289 |
#size-cells = <2>; |
| 290 |
status = "disabled"; |
| 291 |
|
| 292 |
#interrupt-cells = <1>; |
| 293 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 294 |
interrupt-map = |
| 295 |
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ |
| 296 |
<0x4800 0 0 2 &pci_intc 1>, |
| 297 |
<0x4800 0 0 3 &pci_intc 2>, |
| 298 |
<0x4800 0 0 4 &pci_intc 3>, |
| 299 |
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ |
| 300 |
<0x5000 0 0 2 &pci_intc 2>, |
| 301 |
<0x5000 0 0 3 &pci_intc 3>, |
| 302 |
<0x5000 0 0 4 &pci_intc 0>, |
| 303 |
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ |
| 304 |
<0x5800 0 0 2 &pci_intc 3>, |
| 305 |
<0x5800 0 0 3 &pci_intc 0>, |
| 306 |
<0x5800 0 0 4 &pci_intc 1>, |
| 307 |
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ |
| 308 |
<0x6000 0 0 2 &pci_intc 0>, |
| 309 |
<0x6000 0 0 3 &pci_intc 1>, |
| 310 |
<0x6000 0 0 4 &pci_intc 2>; |
| 311 |
|
| 312 |
bus-range = <0x00 0xff>; |
| 313 |
/* PCI ranges mappings */ |
| 314 |
ranges = |
| 315 |
/* 1MiB I/O space 0x50000000-0x500fffff */ |
| 316 |
<0x01000000 0 0 0x50000000 0 0x00100000>, |
| 317 |
/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ |
| 318 |
<0x02000000 0 0x58000000 0x58000000 0 0x08000000>; |
| 319 |
|
| 320 |
/* DMA ranges */ |
| 321 |
dma-ranges = |
| 322 |
/* 128MiB at 0x00000000-0x07ffffff */ |
| 323 |
<0x02000000 0 0x00000000 0x00000000 0 0x08000000>, |
| 324 |
/* 64MiB at 0x00000000-0x03ffffff */ |
| 325 |
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>, |
| 326 |
/* 64MiB at 0x00000000-0x03ffffff */ |
| 327 |
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>; |
| 328 |
|
| 329 |
/* |
| 330 |
* This PCI host bridge variant has a cascaded interrupt |
| 331 |
* controller embedded in the host bridge. |
| 332 |
*/ |
| 333 |
pci_intc: interrupt-controller { |
| 334 |
interrupt-parent = <&intcon>; |
| 335 |
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; |
| 336 |
interrupt-controller; |
| 337 |
#address-cells = <0>; |
| 338 |
#interrupt-cells = <1>; |
| 339 |
}; |
| 340 |
}; |
| 341 |
|
| 342 |
ethernet: ethernet@60000000 { |
| 343 |
compatible = "cortina,gemini-ethernet"; |
| 344 |
reg = <0x60000000 0x4000>, /* Global registers, queue */ |
| 345 |
<0x60004000 0x2000>, /* V-bit */ |
| 346 |
<0x60006000 0x2000>; /* A-bit */ |
| 347 |
pinctrl-names = "default"; |
| 348 |
pinctrl-0 = <&gmii_default_pins>; |
| 349 |
status = "disabled"; |
| 350 |
#address-cells = <1>; |
| 351 |
#size-cells = <1>; |
| 352 |
ranges; |
| 353 |
|
| 354 |
gmac0: ethernet-port@0 { |
| 355 |
compatible = "cortina,gemini-ethernet-port"; |
| 356 |
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ |
| 357 |
<0x6000a000 0x2000>; /* Port 0 GMAC */ |
| 358 |
interrupt-parent = <&intcon>; |
| 359 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; |
| 360 |
resets = <&syscon GEMINI_RESET_GMAC0>; |
| 361 |
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; |
| 362 |
clock-names = "PCLK"; |
| 363 |
}; |
| 364 |
|
| 365 |
gmac1: ethernet-port@1 { |
| 366 |
compatible = "cortina,gemini-ethernet-port"; |
| 367 |
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ |
| 368 |
<0x6000e000 0x2000>; /* Port 1 GMAC */ |
| 369 |
interrupt-parent = <&intcon>; |
| 370 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; |
| 371 |
resets = <&syscon GEMINI_RESET_GMAC1>; |
| 372 |
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; |
| 373 |
clock-names = "PCLK"; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
crypto: crypto@62000000 { |
| 378 |
compatible = "cortina,sl3516-crypto"; |
| 379 |
reg = <0x62000000 0x10000>; |
| 380 |
interrupts = <7 IRQ_TYPE_EDGE_RISING>; |
| 381 |
resets = <&syscon GEMINI_RESET_SECURITY>; |
| 382 |
clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; |
| 383 |
}; |
| 384 |
|
| 385 |
ide0: ide@63000000 { |
| 386 |
compatible = "cortina,gemini-pata", "faraday,ftide010"; |
| 387 |
reg = <0x63000000 0x1000>; |
| 388 |
interrupts = <4 IRQ_TYPE_EDGE_RISING>; |
| 389 |
resets = <&syscon GEMINI_RESET_IDE>; |
| 390 |
clocks = <&syscon GEMINI_CLK_GATE_IDE>; |
| 391 |
clock-names = "PCLK"; |
| 392 |
sata = <&sata>; |
| 393 |
status = "disabled"; |
| 394 |
#address-cells = <1>; |
| 395 |
#size-cells = <0>; |
| 396 |
}; |
| 397 |
|
| 398 |
ide1: ide@63400000 { |
| 399 |
compatible = "cortina,gemini-pata", "faraday,ftide010"; |
| 400 |
reg = <0x63400000 0x1000>; |
| 401 |
interrupts = <5 IRQ_TYPE_EDGE_RISING>; |
| 402 |
resets = <&syscon GEMINI_RESET_IDE>; |
| 403 |
clocks = <&syscon GEMINI_CLK_GATE_IDE>; |
| 404 |
clock-names = "PCLK"; |
| 405 |
sata = <&sata>; |
| 406 |
status = "disabled"; |
| 407 |
#address-cells = <1>; |
| 408 |
#size-cells = <0>; |
| 409 |
}; |
| 410 |
|
| 411 |
dma-controller@67000000 { |
| 412 |
compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; |
| 413 |
/* Faraday Technology FTDMAC020 variant */ |
| 414 |
arm,primecell-periphid = <0x0003b080>; |
| 415 |
reg = <0x67000000 0x1000>; |
| 416 |
interrupts = <9 IRQ_TYPE_EDGE_RISING>; |
| 417 |
resets = <&syscon GEMINI_RESET_DMAC>; |
| 418 |
clocks = <&syscon GEMINI_CLK_AHB>; |
| 419 |
clock-names = "apb_pclk"; |
| 420 |
/* Bus interface AHB1 (AHB0) is totally tilted */ |
| 421 |
lli-bus-interface-ahb2; |
| 422 |
mem-bus-interface-ahb2; |
| 423 |
memcpy-burst-size = <256>; |
| 424 |
memcpy-bus-width = <32>; |
| 425 |
#dma-cells = <2>; |
| 426 |
}; |
| 427 |
|
| 428 |
display-controller@6a000000 { |
| 429 |
compatible = "cortina,gemini-tvc", "faraday,tve200"; |
| 430 |
reg = <0x6a000000 0x1000>; |
| 431 |
interrupts = <13 IRQ_TYPE_EDGE_RISING>; |
| 432 |
resets = <&syscon GEMINI_RESET_TVC>; |
| 433 |
clocks = <&syscon GEMINI_CLK_GATE_TVC>, |
| 434 |
<&syscon GEMINI_CLK_TVC>; |
| 435 |
clock-names = "PCLK", "TVE"; |
| 436 |
pinctrl-names = "default"; |
| 437 |
pinctrl-0 = <&tvc_default_pins>; |
| 438 |
status = "disabled"; |
| 439 |
}; |
| 440 |
|
| 441 |
usb0: usb@68000000 { |
| 442 |
compatible = "cortina,gemini-usb", "faraday,fotg200"; |
| 443 |
reg = <0x68000000 0x1000>; |
| 444 |
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; |
| 445 |
resets = <&syscon GEMINI_RESET_USB0>; |
| 446 |
clocks = <&syscon GEMINI_CLK_GATE_USB0>; |
| 447 |
clock-names = "PCLK"; |
| 448 |
/* |
| 449 |
* This will claim pins for USB0 and USB1 at the same |
| 450 |
* time as they are using some common pins. If you for |
| 451 |
* some reason have a system using USB1 at 96000000 but |
| 452 |
* NOT using USB0 at 68000000 you wll have to add the |
| 453 |
* usb_default_pins to the USB controller at 96000000 |
| 454 |
* in your .dts for the board. |
| 455 |
*/ |
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&usb_default_pins>; |
| 458 |
/* Default to host mode */ |
| 459 |
dr_mode = "host"; |
| 460 |
syscon = <&syscon>; |
| 461 |
status = "disabled"; |
| 462 |
}; |
| 463 |
|
| 464 |
usb1: usb@69000000 { |
| 465 |
compatible = "cortina,gemini-usb", "faraday,fotg200"; |
| 466 |
reg = <0x69000000 0x1000>; |
| 467 |
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; |
| 468 |
resets = <&syscon GEMINI_RESET_USB1>; |
| 469 |
clocks = <&syscon GEMINI_CLK_GATE_USB1>; |
| 470 |
clock-names = "PCLK"; |
| 471 |
syscon = <&syscon>; |
| 472 |
status = "disabled"; |
| 473 |
}; |
| 474 |
}; |
| 475 |
}; |