| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "gemini.dtsi" |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/thermal/thermal.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; |
| 14 |
compatible = "dlink,dns-313", "cortina,gemini"; |
| 15 |
#address-cells = <1>; |
| 16 |
#size-cells = <1>; |
| 17 |
|
| 18 |
memory@0 { |
| 19 |
/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ |
| 20 |
device_type = "memory"; |
| 21 |
reg = <0x00000000 0x4000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
aliases { |
| 25 |
mdio-gpio0 = &mdio0; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; |
| 30 |
stdout-path = "uart0:19200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
gpio_keys { |
| 34 |
compatible = "gpio-keys"; |
| 35 |
|
| 36 |
button-reset { |
| 37 |
debounce-interval = <100>; |
| 38 |
wakeup-source; |
| 39 |
linux,code = <KEY_RESTART>; |
| 40 |
label = "reset"; |
| 41 |
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
leds { |
| 46 |
compatible = "gpio-leds"; |
| 47 |
led-power { |
| 48 |
label = "dns313:blue:power"; |
| 49 |
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; |
| 50 |
default-state = "on"; |
| 51 |
linux,default-trigger = "heartbeat"; |
| 52 |
}; |
| 53 |
led-disk-blue { |
| 54 |
label = "dns313:blue:disk"; |
| 55 |
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; |
| 56 |
default-state = "off"; |
| 57 |
}; |
| 58 |
led-disk-green { |
| 59 |
label = "dns313:green:disk"; |
| 60 |
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; |
| 61 |
default-state = "off"; |
| 62 |
linux,default-trigger = "disk-read"; |
| 63 |
}; |
| 64 |
led-disk-red { |
| 65 |
label = "dns313:red:disk"; |
| 66 |
gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; |
| 67 |
default-state = "off"; |
| 68 |
linux,default-trigger = "disk-write"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
/* |
| 73 |
* This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM. |
| 74 |
*/ |
| 75 |
fan0: gpio-fan { |
| 76 |
compatible = "gpio-fan"; |
| 77 |
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, |
| 78 |
<&gpio0 12 GPIO_ACTIVE_HIGH>; |
| 79 |
gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; |
| 80 |
#cooling-cells = <2>; |
| 81 |
}; |
| 82 |
|
| 83 |
/* |
| 84 |
* This is the type B USB connector on the device, |
| 85 |
* a GPIO-controlled USB VBUS detect |
| 86 |
*/ |
| 87 |
usb1_phy: phy { |
| 88 |
compatible = "gpio-usb-b-connector", "usb-b-connector"; |
| 89 |
#phy-cells = <0>; |
| 90 |
vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; |
| 91 |
}; |
| 92 |
|
| 93 |
/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ |
| 94 |
i2c { |
| 95 |
compatible = "i2c-gpio"; |
| 96 |
sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; |
| 97 |
scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; |
| 98 |
#address-cells = <1>; |
| 99 |
#size-cells = <0>; |
| 100 |
|
| 101 |
g751: temperature-sensor@48 { |
| 102 |
compatible = "gmt,g751"; |
| 103 |
reg = <0x48>; |
| 104 |
#thermal-sensor-cells = <0>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
thermal-zones { |
| 109 |
chassis-thermal { |
| 110 |
/* Poll every 20 seconds */ |
| 111 |
polling-delay = <20000>; |
| 112 |
/* Poll every 2nd second when cooling */ |
| 113 |
polling-delay-passive = <2000>; |
| 114 |
|
| 115 |
thermal-sensors = <&g751>; |
| 116 |
|
| 117 |
/* Tripping points from the fan.script in the rootfs */ |
| 118 |
trips { |
| 119 |
chassis_alert0: chassis-alert0 { |
| 120 |
/* At 43 degrees turn on low speed */ |
| 121 |
temperature = <43000>; |
| 122 |
hysteresis = <3000>; |
| 123 |
type = "active"; |
| 124 |
}; |
| 125 |
chassis_alert1: chassis-alert1 { |
| 126 |
/* At 47 degrees turn on high speed */ |
| 127 |
temperature = <47000>; |
| 128 |
hysteresis = <3000>; |
| 129 |
type = "active"; |
| 130 |
}; |
| 131 |
chassis_crit: chassis-crit { |
| 132 |
/* Just shut down at 60 degrees */ |
| 133 |
temperature = <60000>; |
| 134 |
hysteresis = <2000>; |
| 135 |
type = "critical"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
cooling-maps { |
| 140 |
map0 { |
| 141 |
trip = <&chassis_alert0>; |
| 142 |
cooling-device = <&fan0 1 1>; |
| 143 |
}; |
| 144 |
map1 { |
| 145 |
trip = <&chassis_alert1>; |
| 146 |
cooling-device = <&fan0 2 2>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
mdio0: mdio { |
| 153 |
compatible = "virtual,mdio-gpio"; |
| 154 |
/* Uses MDC and MDIO */ |
| 155 |
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ |
| 156 |
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
|
| 160 |
/* This is a Realtek RTL8211B Gigabit ethernet transceiver */ |
| 161 |
phy0: ethernet-phy@1 { |
| 162 |
reg = <1>; |
| 163 |
device_type = "ethernet-phy"; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
soc { |
| 168 |
flash@30000000 { |
| 169 |
/* |
| 170 |
* This is a Eon EN29LV400AB 512 KiB flash with |
| 171 |
* three partitions. |
| 172 |
*/ |
| 173 |
compatible = "cortina,gemini-flash", "jedec-flash"; |
| 174 |
status = "okay"; |
| 175 |
reg = <0x30000000 0x00080000>; |
| 176 |
#address-cells = <1>; |
| 177 |
#size-cells = <1>; |
| 178 |
|
| 179 |
/* |
| 180 |
* This "RedBoot" is the Storlink derivative. |
| 181 |
*/ |
| 182 |
partition@0 { |
| 183 |
label = "RedBoot"; |
| 184 |
reg = <0x00000000 0x00040000>; |
| 185 |
read-only; |
| 186 |
}; |
| 187 |
partition@40000 { |
| 188 |
label = "MTD1"; |
| 189 |
reg = <0x00040000 0x00020000>; |
| 190 |
read-only; |
| 191 |
}; |
| 192 |
partition@60000 { |
| 193 |
label = "MTD2"; |
| 194 |
reg = <0x00060000 0x00020000>; |
| 195 |
read-only; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
syscon: syscon@40000000 { |
| 200 |
pinctrl { |
| 201 |
/* |
| 202 |
*/ |
| 203 |
gpio0_default_pins: pinctrl-gpio0 { |
| 204 |
mux { |
| 205 |
function = "gpio0"; |
| 206 |
groups = |
| 207 |
/* Used by LEDs conflicts ICE */ |
| 208 |
"gpio0bgrp", |
| 209 |
/* Used by ? conflicts ICE */ |
| 210 |
"gpio0cgrp", |
| 211 |
/* |
| 212 |
* Used by fan & G751, conflicts LPC, |
| 213 |
* UART modem lines, SSP |
| 214 |
*/ |
| 215 |
"gpio0egrp", |
| 216 |
/* Used by G751 */ |
| 217 |
"gpio0fgrp", |
| 218 |
/* Used by MDIO */ |
| 219 |
"gpio0igrp"; |
| 220 |
}; |
| 221 |
}; |
| 222 |
gpio1_default_pins: pinctrl-gpio1 { |
| 223 |
mux { |
| 224 |
function = "gpio1"; |
| 225 |
/* Used by "reset" button */ |
| 226 |
groups = "gpio1dgrp"; |
| 227 |
}; |
| 228 |
}; |
| 229 |
pinctrl-gmii { |
| 230 |
mux { |
| 231 |
function = "gmii"; |
| 232 |
groups = "gmii_gmac0_grp"; |
| 233 |
}; |
| 234 |
/* |
| 235 |
* In the vendor Linux tree, these values are set for the C3 |
| 236 |
* version of the SL3512 ASIC with the comment "benson suggest" |
| 237 |
*/ |
| 238 |
conf0 { |
| 239 |
pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; |
| 240 |
skew-delay = <0>; |
| 241 |
}; |
| 242 |
conf1 { |
| 243 |
pins = "T8 GMAC0 RXC"; |
| 244 |
skew-delay = <10>; |
| 245 |
}; |
| 246 |
conf2 { |
| 247 |
pins = "T11 GMAC1 RXC"; |
| 248 |
skew-delay = <15>; |
| 249 |
}; |
| 250 |
conf3 { |
| 251 |
pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; |
| 252 |
skew-delay = <7>; |
| 253 |
}; |
| 254 |
conf4 { |
| 255 |
pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC"; |
| 256 |
skew-delay = <10>; |
| 257 |
}; |
| 258 |
conf5 { |
| 259 |
/* The data lines all have default skew */ |
| 260 |
pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", |
| 261 |
"P9 GMAC0 RXD2", "R9 GMAC0 RXD3", |
| 262 |
"R11 GMAC1 RXD0", "P11 GMAC1 RXD1", |
| 263 |
"V12 GMAC1 RXD2", "U12 GMAC1 RXD3", |
| 264 |
"R10 GMAC1 TXD0", "T10 GMAC1 TXD1", |
| 265 |
"U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; |
| 266 |
skew-delay = <7>; |
| 267 |
}; |
| 268 |
conf6 { |
| 269 |
pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", |
| 270 |
"R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; |
| 271 |
skew-delay = <5>; |
| 272 |
}; |
| 273 |
/* Set up drive strength on GMAC0 to 16 mA */ |
| 274 |
conf7 { |
| 275 |
groups = "gmii_gmac0_grp"; |
| 276 |
drive-strength = <16>; |
| 277 |
}; |
| 278 |
}; |
| 279 |
}; |
| 280 |
}; |
| 281 |
|
| 282 |
sata: sata@46000000 { |
| 283 |
/* The ROM uses this muxmode */ |
| 284 |
cortina,gemini-ata-muxmode = <0>; |
| 285 |
cortina,gemini-enable-sata-bridge; |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
gpio0: gpio@4d000000 { |
| 290 |
pinctrl-names = "default"; |
| 291 |
pinctrl-0 = <&gpio0_default_pins>; |
| 292 |
}; |
| 293 |
|
| 294 |
gpio1: gpio@4e000000 { |
| 295 |
pinctrl-names = "default"; |
| 296 |
pinctrl-0 = <&gpio1_default_pins>; |
| 297 |
}; |
| 298 |
|
| 299 |
ethernet@60000000 { |
| 300 |
status = "okay"; |
| 301 |
|
| 302 |
ethernet-port@0 { |
| 303 |
phy-mode = "rgmii"; |
| 304 |
phy-handle = <&phy0>; |
| 305 |
}; |
| 306 |
ethernet-port@1 { |
| 307 |
/* Not used in this platform */ |
| 308 |
}; |
| 309 |
}; |
| 310 |
|
| 311 |
ide@63000000 { |
| 312 |
status = "okay"; |
| 313 |
}; |
| 314 |
|
| 315 |
usb@69000000 { |
| 316 |
status = "okay"; |
| 317 |
dr_mode = "peripheral"; |
| 318 |
usb-phy = <&usb1_phy>; |
| 319 |
pinctrl-names = "default"; |
| 320 |
pinctrl-0 = <&usb_default_pins>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
}; |