| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "gemini.dtsi" |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Raidsonic NAS IB-4220-B"; |
| 13 |
compatible = "raidsonic,ib-4220-b", "cortina,gemini"; |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
memory@0 { /* 128 MB */ |
| 18 |
device_type = "memory"; |
| 19 |
reg = <0x00000000 0x8000000>; |
| 20 |
}; |
| 21 |
|
| 22 |
chosen { |
| 23 |
bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; |
| 24 |
stdout-path = &uart0; |
| 25 |
}; |
| 26 |
|
| 27 |
gpio_keys { |
| 28 |
compatible = "gpio-keys"; |
| 29 |
|
| 30 |
button-setup { |
| 31 |
debounce-interval = <100>; |
| 32 |
wakeup-source; |
| 33 |
linux,code = <KEY_SETUP>; |
| 34 |
label = "Backup button"; |
| 35 |
/* Conflict with TVC */ |
| 36 |
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 37 |
}; |
| 38 |
button-restart { |
| 39 |
debounce-interval = <100>; |
| 40 |
wakeup-source; |
| 41 |
linux,code = <KEY_RESTART>; |
| 42 |
label = "Softreset button"; |
| 43 |
/* Conflict with TVC */ |
| 44 |
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
leds { |
| 49 |
compatible = "gpio-leds"; |
| 50 |
led-orange-hdd { |
| 51 |
label = "nas4220b:orange:hdd"; |
| 52 |
/* Conflict with TVC */ |
| 53 |
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| 54 |
default-state = "on"; |
| 55 |
}; |
| 56 |
led-green-os { |
| 57 |
label = "nas4220b:green:os"; |
| 58 |
/* Conflict with TVC */ |
| 59 |
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; |
| 60 |
default-state = "on"; |
| 61 |
linux,default-trigger = "heartbeat"; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
mdio0: mdio { |
| 66 |
compatible = "virtual,mdio-gpio"; |
| 67 |
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ |
| 68 |
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ |
| 69 |
#address-cells = <1>; |
| 70 |
#size-cells = <0>; |
| 71 |
|
| 72 |
phy0: ethernet-phy@1 { |
| 73 |
reg = <1>; |
| 74 |
device_type = "ethernet-phy"; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
soc { |
| 79 |
flash@30000000 { |
| 80 |
status = "okay"; |
| 81 |
/* 16MB of flash */ |
| 82 |
reg = <0x30000000 0x01000000>; |
| 83 |
|
| 84 |
partitions { |
| 85 |
compatible = "redboot-fis"; |
| 86 |
/* Eraseblock at 0xfe0000 */ |
| 87 |
fis-index-block = <0x7f>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
syscon: syscon@40000000 { |
| 92 |
pinctrl { |
| 93 |
/* |
| 94 |
* gpio1dgrp cover line 28-31 otherwise used |
| 95 |
* by TVC. |
| 96 |
*/ |
| 97 |
gpio1_default_pins: pinctrl-gpio1 { |
| 98 |
mux { |
| 99 |
function = "gpio1"; |
| 100 |
groups = "gpio1dgrp"; |
| 101 |
}; |
| 102 |
}; |
| 103 |
pinctrl-gmii { |
| 104 |
mux { |
| 105 |
function = "gmii"; |
| 106 |
groups = "gmii_gmac0_grp"; |
| 107 |
}; |
| 108 |
/* Settings come from OpenWRT, pins on SL3516 */ |
| 109 |
conf0 { |
| 110 |
pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV"; |
| 111 |
skew-delay = <0>; |
| 112 |
}; |
| 113 |
conf1 { |
| 114 |
pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC"; |
| 115 |
skew-delay = <15>; |
| 116 |
}; |
| 117 |
conf2 { |
| 118 |
pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN"; |
| 119 |
skew-delay = <7>; |
| 120 |
}; |
| 121 |
conf3 { |
| 122 |
pins = "U8 GMAC0 TXC"; |
| 123 |
skew-delay = <11>; |
| 124 |
}; |
| 125 |
conf4 { |
| 126 |
pins = "V11 GMAC1 TXC"; |
| 127 |
skew-delay = <10>; |
| 128 |
}; |
| 129 |
conf5 { |
| 130 |
/* The data lines all have default skew */ |
| 131 |
pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", |
| 132 |
"Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", |
| 133 |
"T7 GMAC0 TXD0", "U6 GMAC0 TXD1", |
| 134 |
"V7 GMAC0 TXD2", "U7 GMAC0 TXD3", |
| 135 |
"Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", |
| 136 |
"T11 GMAC1 RXD2", "W12 GMAC1 RXD3", |
| 137 |
"U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", |
| 138 |
"W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; |
| 139 |
skew-delay = <7>; |
| 140 |
}; |
| 141 |
/* Set up drive strength on GMAC0 to 16 mA */ |
| 142 |
conf6 { |
| 143 |
groups = "gmii_gmac0_grp"; |
| 144 |
drive-strength = <16>; |
| 145 |
}; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
sata: sata@46000000 { |
| 151 |
cortina,gemini-ata-muxmode = <0>; |
| 152 |
cortina,gemini-enable-sata-bridge; |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
gpio1: gpio@4e000000 { |
| 157 |
pinctrl-names = "default"; |
| 158 |
pinctrl-0 = <&gpio1_default_pins>; |
| 159 |
}; |
| 160 |
|
| 161 |
ethernet@60000000 { |
| 162 |
status = "okay"; |
| 163 |
|
| 164 |
ethernet-port@0 { |
| 165 |
phy-mode = "rgmii"; |
| 166 |
phy-handle = <&phy0>; |
| 167 |
}; |
| 168 |
ethernet-port@1 { |
| 169 |
/* Not used in this platform */ |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
ide@63000000 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
ide@63400000 { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
usb@68000000 { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
usb@69000000 { |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
}; |
| 189 |
}; |