Debian Codegraph @

Documentation/Manual/English/statics-rigid-examples.texinfo

raw
1 @c -*-texinfo-*-
2 @c This is part of the FisicaLab User Manual.
3 @c Copyright (C) 2013 German A. Arias.
4 @c See the file copying.texinfo for copying conditions.
5
6 @node Examples statics rigid bodies, Dynamics, Rigid statics, Top
7 @chapter Examples statics rigid bodies
8
9 @cindex Examples statics rigid bodies
10
11
12 @menu
13 * Example 1 (rs)::
14 * Example 2 (rs)::
15 * Example 3 (rs)::
16 * Example 4 (rs)::
17 * Example 5 (rs)::
18 * Example 6 (rs)::
19 * Example 7 (rs)::
20 * Example 8 (rs)::
21 * Example 9 (rs)::
22 * Example 10 (rs)::
23 * Example 11 (rs)::
24 * Example 12 (rs)::
25 * Example 13 (rs)::
26 @end menu
27
28
29 @node Example 1 (rs), Example 2 (rs), Examples statics rigid bodies, Examples statics rigid bodies
30 @section Example 1
31
32 @cindex Example 1 (rs)
33
34 Calculate the resultant, at point A, of the forces applied to the piece.
35
36 @center @image{sr-e1-1, 7cm}
37
38 @sp 2
39
40 @strong{Solution with FisicaLab}
41
42 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Points, four elements Point, one element Resultant and three elements Force, as show the image below:
43
44 @center @image{sr-e1-2, 7cm}
45
46 To the element Points, we call this @emph{Piece}:
47
48 @sp 1
49
50 @table @strong
51
52 @item Name
53 Piece
54
55 @end table
56
57 @sp 1
58
59 To the element Point that represent the corner A, assuming this is at the origin, we have:
60
61 @sp 1
62
63 @table @strong
64
65 @item Name
66 Piece
67
68 @item x
69 0
70
71 @item y
72 0
73
74 @end table
75
76 @sp 1
77
78 Now to the element Point at corner B:
79
80 @sp 1
81
82 @table @strong
83
84 @item Name
85 Piece
86
87 @item x
88 30 @@ cm
89
90 @item y
91 20 @@ cm
92
93 @end table
94
95 @sp 1
96
97 And to the applied force at this corner:
98
99 @sp 1
100
101 @table @strong
102
103 @item f
104 20
105
106 @end table
107
108 @sp 1
109
110 To the element Point at corner C:
111
112 @sp 1
113
114 @table @strong
115
116 @item Name
117 Piece
118
119 @item x
120 75 @@ cm
121
122 @item y
123 20 @@ cm
124
125 @end table
126
127 @sp 1
128
129 And to the applied force here:
130
131 @sp 1
132
133 @table @strong
134
135 @item f
136 30
137
138 @item ang
139 55
140
141 @end table
142
143 @sp 1
144
145 To corner D:
146
147 @sp 1
148
149 @table @strong
150
151 @item Name
152 Piece
153
154 @item x
155 45 @@ mm
156
157 @item y
158 0
159
160 @end table
161
162 @sp 1
163
164 And to the force:
165
166 @sp 1
167
168 @table @strong
169
170 @item f
171 17
172
173 @item ang
174 40
175
176 @end table
177
178 @sp 1
179
180 Now to the element Resultant:
181
182 @sp 1
183
184 @table @strong
185
186 @item M
187 Mr
188
189 @item f
190 Fr
191
192 @item ang
193 angr
194
195 @end table
196
197 @sp 1
198
199 Now click in the icon Solve to get the answer:
200
201 @example
202
203 Mr = -2.296 N*m ; Fr = 33.906 N ; angr = 277.089 degrees ;
204 Status = success.
205
206 @end example
207
208 @page
209
210
211 @node Example 2 (rs), Example 3 (rs), Example 1 (rs), Examples statics rigid bodies
212 @section Example 2
213
214 @cindex Example 2 (rs)
215
216 Calculate the resultant, at point O, of the applied force (ignore the weight of the beam).
217
218 @center @image{sr-e2-1, 6cm}
219
220 @sp 2
221
222 @strong{Solution with FisicaLab}
223
224 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the English system. And add one element Stationary reference system, one element Beam, two elements of beam, one element Force and one element Resultant with vertical force, as show the image below:
225
226 @center @image{sr-e2-2, 6cm}
227
228 The element Stationary reference system set, to default, the gravity value:
229
230 @sp 1
231
232 @table @strong
233
234 @item g
235 32.2
236
237 @end table
238
239 @sp 1
240
241 To the element Beam, we call this @emph{Beam}, we have:
242
243 @sp 1
244
245 @table @strong
246
247 @item Name
248 Beam
249
250 @item m
251 0
252
253 @item lc
254 0
255
256 @item ang
257 55
258
259 @end table
260
261 @sp 1
262
263 Here we have 0 to the mass, because we must ignore the weight of the beam. To the element of beam that represent the lower side, we have:
264
265 @sp 1
266
267 @table @strong
268
269 @item Name
270 Beam
271
272 @item l
273 0
274
275 @end table
276
277 @sp 1
278
279 And to the element Resultant applied here:
280
281 @sp 1
282
283 @table @strong
284
285 @item M
286 Mr
287
288 @item f
289 Fr
290
291 @end table
292
293 @sp 1
294
295 To the other element of beam, we have:
296
297 @sp 1
298
299 @table @strong
300
301 @item Name
302 Beam
303
304 @item l
305 27 @@ in
306
307 @end table
308
309 @sp 1
310
311 And to the applied force:
312
313 @sp 1
314
315 @table @strong
316
317 @item f
318 85
319
320 @end table
321
322 @sp 1
323
324 Now click in the icon Solve to get the answer:
325
326 @example
327
328 Mr = -109.696 lb*ft ; Fr = -85.000 lb ;
329 Status = success.
330
331 @end example
332
333 @page
334
335
336 @node Example 3 (rs), Example 4 (rs), Example 2 (rs), Examples statics rigid bodies
337 @section Example 3
338
339 @cindex Example 3 (rs)
340
341 If we want to replace the two forces of 175 N and 380 N force with a single force applied at point P as shown the image, What should be the distance from point P to point O and the magnitude of this force? (The beam and the drum form a rigid body)
342
343 @center @image{sr-e3-1, 6cm}
344
345 @sp 2
346
347 @strong{Solution with FisicaLab}
348
349 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. This problem can be solved on different ways, here we will solve it as follow. First add one element Points, three elements point and the necessary elements force and resultant, as show the image below. Our initial intention is calculate the couple of the pair of 175 N forces, at point O.
350
351 @center @image{sr-e3-2, 4cm}
352
353 To the element Points, that represent the different points of the drum and that we call @emph{Drum}, we have:
354
355 @sp 1
356
357 @table @strong
358
359 @item Name
360 Drum
361
362 @end table
363
364 @sp 1
365
366 To the element Point that represent the center O, we assume this at origin:
367
368 @sp 1
369
370 @table @strong
371
372 @item Name
373 Drum
374
375 @item x
376 0
377
378 @item y
379 0
380
381 @end table
382
383 @sp 1
384
385 And to the element Resultant applied here:
386
387 @sp 1
388
389 @table @strong
390
391 @item M
392 Mr
393
394 @item f
395 Fr
396
397 @end table
398
399 @sp 1
400
401 Now to the upper point, we have:
402
403 @sp 1
404
405 @table @strong
406
407 @item Name
408 Drum
409
410 @item x
411 0
412
413 @item y
414 45 @@ mm
415
416 @end table
417
418 @sp 1
419
420 And to the lower point:
421
422 @sp 1
423
424 @table @strong
425
426 @item Name
427 Drum
428
429 @item x
430 0
431
432 @item y
433 -45 @@ mm
434
435 @end table
436
437 @sp 1
438
439 And to the two applied forces:
440
441 @sp 1
442
443 @table @strong
444
445 @item f
446 175
447
448 @end table
449
450 @sp 1
451
452 Now click in the icon Solve to get the answer:
453
454 @example
455
456 Mr = -15.750 N*m ; Fr = 0.000 N ;
457 Status = success.
458
459 @end example
460
461 Now that we know the moment of the pair of 175 N forces, erase the content of chalkboard and add the necessary elements as show the image below:
462
463 @center @image{sr-e3-3, 6cm}
464
465 The Stationary reference system set the gravity value to default. Now to the element Beam, we call this @emph{Beam}, we have:
466
467 @sp 1
468
469 @table @strong
470
471 @item Name
472 Beam
473
474 @item m
475 0
476
477 @item lc
478 0
479
480 @item ang
481 60
482
483 @end table
484
485 @sp 1
486
487 Here we ignore the weight of the beam. To the element of beam that represent the lower side and to the applied couple (the previous calculated value), we have:
488
489 @sp 1
490
491 @table @strong
492
493 @item Name
494 Beam
495
496 @item l
497 0
498
499 @end table
500
501 @sp 2
502
503 @table @strong
504
505 @item M
506 -15.750
507
508 @end table
509
510 @sp 1
511
512 Now to the element of beam where is applied the other force, and to this force, we have:
513
514 @sp 1
515
516 @table @strong
517
518 @item Name
519 Beam
520
521 @item l
522 28 @@ cm
523
524 @end table
525
526 @sp 2
527
528 @table @strong
529
530 @item f
531 380
532
533 @end table
534
535 @sp 1
536
537 To the element of beam that represent the point P:
538
539 @sp 1
540
541 @table @strong
542
543 @item Name
544 Beam
545
546 @item l
547 d
548
549 @end table
550
551 @sp 1
552
553 Here the distance is an unknown data. And to the resultant applied here:
554
555 @sp 1
556
557 @table @strong
558
559 @item M
560 0
561
562 @item f
563 Fr
564
565 @end table
566
567 @sp 1
568
569 Here the couple is 0, because we want just a force, which is an unknown data. Now click in the icon Solve to get the answer:
570
571 @example
572
573 d = 0.363 m ; Fr = -380.000 N ;
574 Status = success.
575
576 @end example
577
578 @page
579
580
581 @node Example 4 (rs), Example 5 (rs), Example 3 (rs), Examples statics rigid bodies
582 @section Example 4
583
584 @cindex Example 4 (rs)
585
586 Calculate the resultant, at joint O, of the applied forces.
587
588 @center @image{sr-e4-1, 7cm}
589
590 @sp 2
591
592 @strong{Solution with FisicaLab}
593
594 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Beam, three elements of beam and the necessary elements Force and Resultant, as show the image below:
595
596 @center @image{sr-e4-2, 6cm}
597
598 The gravity value is added to default. Now to the element Beam, that we call @emph{Beam}, we have:
599
600 @sp 1
601
602 @table @strong
603
604 @item Name
605 Beam
606
607 @item m
608 0
609
610 @item lc
611 0
612
613 @item ang
614 55
615
616 @end table
617
618 @sp 1
619
620 To the element of beam that represent the lower side, and to the resultant applied here, we have:
621
622 @sp 1
623
624 @table @strong
625
626 @item Name
627 Beam
628
629 @item l
630 0
631
632 @end table
633
634 @sp 2
635
636 @table @strong
637
638 @item M
639 Mr
640
641 @item f
642 Fr
643
644 @item ang
645 angr
646
647 @end table
648
649 @sp 1
650
651 On the resultant element all are unknown data. Now to the element of beam that represent the point A, and to the applied force, we have:
652
653 @sp 1
654
655 @table @strong
656
657 @item Name
658 Name
659
660 @item l
661 62 @@ cm
662
663 @end table
664
665 @sp 2
666
667 @table @strong
668
669 @item f
670 50
671
672 @item ang
673 15
674
675 @end table
676
677 @sp 1
678
679 To the element of beam that represent the point B and to the applied force, we have:
680
681 @sp 1
682
683 @table @strong
684
685 @item Name
686 Beam
687
688 @item l
689 90 @@ cm
690
691 @end table
692
693 @sp 2
694
695 @table @strong
696
697 @item f
698 50
699
700 @item ang
701 15
702
703 @end table
704
705 @sp 1
706
707 Now click in the icon Solve to get the answer:
708
709 @example
710
711 Mr = -8.999 N*m ; Fr = 0.000 N ; angr = 208.262 degrees ;
712 Status = success.
713
714 @end example
715
716 As we expected the resultant is only a couple. Here the angle is irrelevant.
717
718 @page
719
720
721 @node Example 5 (rs), Example 6 (rs), Example 4 (rs), Examples statics rigid bodies
722 @section Example 5
723
724 @cindex Example 5 (rs)
725
726 Calculate the support reactions, knowing that the beam has a mass of 4 kg and a length of 2.1 m.
727
728 @center @image{sr-e5-1, 8cm}
729
730 @sp 2
731
732 @strong{Solution with FisicaLab}
733
734 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Beam, six elements of beam and the necessary elements Force, as show the image below:
735
736 @center @image{sr-e5-2, 8cm}
737
738 The Stationary reference system set the gravity value to default. Now to the element Beam, that we call @emph{Beam} and assuming has its center of mass at middle, we have:
739
740 @sp 1
741
742 @table @strong
743
744 @item Name
745 Beam
746
747 @item m
748 4
749
750 @item lc
751 1.05
752
753 @item ang
754 0
755
756 @end table
757
758 @sp 1
759
760 Now to the elements of beam and its applied forces we have, from left to right:
761
762 @sp 1
763
764 @table @strong
765
766 @item Name
767 Beam
768
769 @item l
770 12 @@ cm
771
772 @end table
773
774 @sp 2
775
776 @table @strong
777
778 @item f
779 30
780
781 @end table
782
783 @sp 1
784
785 To the element at 40 cm from the left side, we call RA the reaction:
786
787 @sp 1
788
789 @table @strong
790
791 @item Name
792 Beam
793
794 @item l
795 40 @@ cm
796
797 @end table
798
799 @sp 2
800
801 @table @strong
802
803 @item f
804 RA
805
806 @end table
807
808 @sp 1
809
810 At 85 cm from the left side:
811
812 @sp 1
813
814 @table @strong
815
816 @item Name
817 Beam
818
819 @item l
820 85 @@ cm
821
822 @end table
823
824 @sp 2
825
826 @table @strong
827
828 @item f
829 24
830
831 @end table
832
833 @sp 1
834
835 At 110 cm:
836
837 @sp 1
838
839 @table @strong
840
841 @item Name
842 Beam
843
844 @item l
845 110 @@ cm
846
847 @end table
848
849 @sp 2
850
851 @table @strong
852
853 @item f
854 45
855
856 @end table
857
858 @sp 1
859
860 At 160 cm, we call RB the reaction:
861
862 @sp 1
863
864 @table @strong
865
866 @item Name
867 Beam
868
869 @item l
870 160 @@ cm
871
872 @end table
873
874 @sp 2
875
876 @table @strong
877
878 @item f
879 RB
880
881 @end table
882
883 @sp 1
884
885 And at 195 cm, the last element:
886
887 @sp 1
888
889 @table @strong
890
891 @item Name
892 Beam
893
894 @item l
895 195 @@ cm
896
897 @end table
898
899 @sp 2
900
901 @table @strong
902
903 @item f
904 33
905
906 @end table
907
908 @sp 1
909
910 Now click in the icon Solve to get the answer:
911
912 @example
913
914 RB = 92.130 N ; RA = 79.110 N ;
915 Status = success.
916
917 @end example
918
919 @page
920
921
922 @node Example 6 (rs), Example 7 (rs), Example 5 (rs), Examples statics rigid bodies
923 @section Example 6
924
925 @cindex Example 6 (rs)
926
927 If the tension in the cable BC is 155 N, what are the reactions at A? (The mass of the beam is 3 kg and its center of mass is 75 cm from A).
928
929 @center @image{sr-e6-1, 7cm}
930
931 @sp 2
932
933 @strong{Solution with FisicaLab}
934
935 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Beam, three elements of beam and the necessary elements Force and Couple, as show the image below:
936
937 @center @image{sr-e6-2, 6cm}
938
939 The Stationary reference system set the gravity value to default. Now to the element Beam, that we call @emph{Beam}:
940
941 @sp 1
942
943 @table @strong
944
945 @item Name
946 Beam
947
948 @item m
949 3
950
951 @item lc
952 75 @@ cm
953
954 @item ang
955 0
956
957 @end table
958
959 @sp 1
960
961 To the element of beam at side A, we have:
962
963 @sp 1
964
965 @table @strong
966
967 @item Name
968 Beam
969
970 @item l
971 0
972
973 @end table
974
975 @sp 1
976
977 And to the forces and couple applied, all unknown data, we have:
978
979 @sp 1
980
981 @table @strong
982
983 @item f
984 Ry
985
986 @end table
987
988 @sp 2
989
990 @table @strong
991
992 @item f
993 Rx
994
995 @end table
996
997 @sp 2
998
999 @table @strong
1000
1001 @item M
1002 M
1003
1004 @end table
1005
1006 @sp 1
1007
1008 To the element of beam where the mass is hanging:
1009
1010 @sp 1
1011
1012 @table @strong
1013
1014 @item Name
1015 Beam
1016
1017 @item l
1018 0.9
1019
1020 @end table
1021
1022 @sp 1
1023
1024 And to the applied force, the weight of the mass (@code{18 kg*9.81 m/s2 = 176.58 N}), we have:
1025
1026 @sp 1
1027
1028 @table @strong
1029
1030 @item f
1031 176.58
1032
1033 @end table
1034
1035 @sp 1
1036
1037 And to the element of beam that represent the right side:
1038
1039 @sp 1
1040
1041 @table @strong
1042
1043 @item Name
1044 Beam
1045
1046 @item l
1047 1.3
1048
1049 @end table
1050
1051 @sp 1
1052
1053 And to the applied force by the cable:
1054
1055 @sp 1
1056
1057 @table @strong
1058
1059 @item f
1060 155
1061
1062 @item ang
1063 35
1064
1065 @end table
1066
1067 @sp 1
1068
1069 Now click in the icon Solve to get the answer:
1070
1071 @example
1072
1073 Ry = 117.106 N ; Rx = 126.969 N ; M = 65.419 N*m ;
1074 Status = success.
1075
1076 @end example
1077
1078 @page
1079
1080
1081 @node Example 7 (rs), Example 8 (rs), Example 6 (rs), Examples statics rigid bodies
1082 @section Example 7
1083
1084 @cindex Example 7 (rs)
1085
1086 What is the maximum force F that can be applied without tipping the piece? (The mass of the piece is 3.5 kg and the mass center point is indicated by the 18 cm).
1087
1088 @center @image{sr-e7-1, 7cm}
1089
1090 @sp 2
1091
1092 @strong{Solution with FisicaLab}
1093
1094 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Solid, two elements of solid and the necessary elements Force, as show the image below:
1095
1096 @center @image{sr-e7-2, 5cm}
1097
1098 The Stationary reference system set the gravity value to default. Now to the element Solid, that we call @emph{Piece}, we have:
1099
1100 @sp 1
1101
1102 @table @strong
1103
1104 @item Name
1105 Piece
1106
1107 @item m
1108 3.5
1109
1110 @item xc
1111 18 @@ cm
1112
1113 @item yc
1114 0
1115
1116 @item ang
1117 0
1118
1119 @end table
1120
1121 @sp 1
1122
1123 To the element of solid that represent the corner where is applied the force F, we have:
1124
1125 @sp 1
1126
1127 @table @strong
1128
1129 @item Name
1130 Piece
1131
1132 @item x
1133 50 @@ cm
1134
1135 @item y
1136 0
1137
1138 @end table
1139
1140 @sp 1
1141
1142 And to the applied force here, that is an unknown data:
1143
1144 @sp 1
1145
1146 @table @strong
1147
1148 @item f
1149 F
1150
1151 @end table
1152
1153 @sp 1
1154
1155 The other element of solid represent the lower right corner, because when the tipping is imminent, the normal force is applied here. Therefore, we have:
1156
1157 @sp 1
1158
1159 @table @strong
1160
1161 @item Name
1162 Piece
1163
1164 @item x
1165 25 @@ cm
1166
1167 @item y
1168 0
1169
1170 @end table
1171
1172 @sp 1
1173
1174 And to the applied force, that represent the normal force and that is an unknown data:
1175
1176 @sp 1
1177
1178 @table @strong
1179
1180 @item f
1181 N
1182
1183 @end table
1184
1185 @sp 1
1186
1187 Now click in the icon Solve to get the answer:
1188
1189 @example
1190
1191 N = 43.949 N ; F = 9.614 N ;
1192 Status = success.
1193
1194 @end example
1195
1196 @page
1197
1198
1199 @node Example 8 (rs), Example 9 (rs), Example 7 (rs), Examples statics rigid bodies
1200 @section Example 8
1201
1202 @cindex Example 8 (rs)
1203
1204 A uniform block of 4 kg, as show the image, is placed on a slope. What is the maximum angle of inclination of the plane, so that the block does not slide or tipping (whichever comes first)? (The coefficient of friction between the block and the plane is 0.4).
1205
1206 @center @image{sr-e8-1, 6cm}
1207
1208 @sp 2
1209
1210 @strong{Solution with FisicaLab}
1211
1212 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Solid, one element of Solid, one element Angles and the necessary elements Force and Friction, as show the image below:
1213
1214 @center @image{sr-e8-2, 5cm}
1215
1216 Our intention to introduce a frictional force is find the angle when the slip is imminent. Thus, the block element represents the point where is applied the normal and here we apply the friction force too (we can move the friction along its action line, so we can apply it in this element).
1217
1218 The Stationary reference system set the gravity value to default. Now on the element Solid, that we call @emph{Block}, we have:
1219
1220 @sp 1
1221
1222 @table @strong
1223
1224 @item Name
1225 Block
1226
1227 @item m
1228 4
1229
1230 @item xc
1231 8 @@ cm
1232
1233 @item yc
1234 18 @@ cm
1235
1236 @item ang
1237 ang1
1238
1239 @end table
1240
1241 @sp 1
1242
1243 Here the angle is an unknown data. To the element of solid, we have:
1244
1245 @sp 1
1246
1247 @table @strong
1248
1249 @item Name
1250 Block
1251
1252 @item x
1253 x @@ cm
1254
1255 @item y
1256 0
1257
1258 @end table
1259
1260 @sp 1
1261
1262 The x coordinate is unknown. This must be so. Because when the sliding of block is imminent, we don't know at where is applied the normal force. Now to the normal force:
1263
1264 @sp 1
1265
1266 @table @strong
1267
1268 @item f
1269 normal
1270
1271 @item ang
1272 ang2
1273
1274 @end table
1275
1276 @sp 1
1277
1278 To the element Friction:
1279
1280 @sp 1
1281
1282 @table @strong
1283
1284 @item Normal
1285 normal
1286
1287 @item ang
1288 ang1
1289
1290 @item u
1291 0.4
1292
1293 @end table
1294
1295 @sp 1
1296
1297 The angle is the same as of the block. Because the friction is parallel to the plane. Now to the element Angles, we have:
1298
1299 @sp 1
1300
1301 @table @strong
1302
1303 @item ang1
1304 ang1
1305
1306 @item ang2
1307 ang2
1308
1309 @end table
1310
1311 @sp 1
1312
1313 Because these angles must be complementary. Once entered the data, click on the icon Solve to get the answer:
1314
1315 @example
1316
1317 normal = 36.433 N ; ang1 = 21.801 degrees ;
1318 ang2 = 68.199 degrees ; x = 0.800 cm ;
1319 Status = success.
1320
1321 @end example
1322
1323 Then, the angle when the sliding of block is imminent is 21.801 degrees (As we expected, because @code{arctan 0.4 = 21.801}). In the case of a negative value, this would mean that the block has already overturned.
1324
1325 @page
1326
1327
1328 @node Example 9 (rs), Example 10 (rs), Example 8 (rs), Examples statics rigid bodies
1329 @section Example 9
1330
1331 @cindex Example 9 (rs)
1332
1333 A uniform ladder, of 3.5 kg and 3.8 m long, rests against a wall as show the image. If a child with a mass of 40 kg, ups to the fourth step at 3.2 m from the base, find the angle for which this position corresponds to the slip imminent if the coefficient of friction between the ladder and the floor is 0.35 (there is no friction between the ladder and the wall).
1334
1335 @center @image{sr-e9-1, 5cm}
1336
1337 @sp 2
1338
1339 @strong{Solution with FisicaLab}
1340
1341 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Beam, three elements of beam and the necessary elements Force and Friction, as show the image below:
1342
1343 @center @image{sr-e9-2, 8cm}
1344
1345 The Stationary reference system set the gravity value to default. Now to the element Beam, that we call @emph{Ladder}, recalling that the ladder is uniform and that the angle is unknown:
1346
1347 @sp 1
1348
1349 @table @strong
1350
1351 @item Name
1352 Ladder
1353
1354 @item m
1355 3.5
1356
1357 @item lc
1358 1.9
1359
1360 @item ang
1361 ang
1362
1363 @end table
1364
1365 @sp 1
1366
1367 To the element of beam that represent the lower side, we have:
1368
1369 @sp 1
1370
1371 @table @strong
1372
1373 @item Name
1374 Ladder
1375
1376 @item l
1377 0
1378
1379 @end table
1380
1381 @sp 1
1382
1383 And to the normal force and the friction:
1384
1385 @sp 1
1386
1387 @table @strong
1388
1389 @item f
1390 N
1391
1392 @end table
1393
1394 @sp 2
1395
1396 @table @strong
1397
1398 @item Normal
1399 N
1400
1401 @item u
1402 0.35
1403
1404 @end table
1405
1406 @sp 1
1407
1408 Now to the element that represent the point where the child is supported, we have:
1409
1410 @sp 1
1411
1412 @table @strong
1413
1414 @item Name
1415 Ladder
1416
1417 @item l
1418 3.2
1419
1420 @end table
1421
1422 @sp 1
1423
1424 And to the force that represent the weight of this child (@code{40 kg*9.81 m/s2 = 392.4 N}):
1425
1426 @sp 1
1427
1428 @table @strong
1429
1430 @item f
1431 392.4
1432
1433 @end table
1434
1435 @sp 1
1436
1437 Finally, to the element that represent the upper side:
1438
1439 @sp 1
1440
1441 @table @strong
1442
1443 @item Name
1444 Ladder
1445
1446 @item l
1447 3.8
1448
1449 @end table
1450
1451 @sp 1
1452
1453 And to the force that represent the reaction of the wall:
1454
1455 @sp 1
1456
1457 @table @strong
1458
1459 @item f
1460 Rx
1461
1462 @end table
1463
1464 @sp 1
1465
1466 Now click in the icon Solve to get the answer:
1467
1468 @example
1469
1470 Rx = 149.357 N ; ang = 66.748 degrees ; N = 426.735 N ;
1471 Status = success.
1472
1473 @end example
1474
1475 @page
1476
1477
1478 @node Example 10 (rs), Example 11 (rs), Example 9 (rs), Examples statics rigid bodies
1479 @section Example 10
1480
1481 @cindex Example 10 (rs)
1482
1483 Consider the structure in the image below. Calculate reactions at O and reactions between the beams at points A, B and C. Ignore the weight of the beams.
1484
1485 @center @image{sr-e10-1, 6cm}
1486
1487 @sp 2
1488
1489 @strong{Solution with FisicaLab}
1490
1491 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, three elements Beam, seven elements of beam and the necessary elements Force and Couple, as show the image below (the yellow lines separate the areas where are defined the beams):
1492
1493 @center @image{sr-e10-2, 9cm}
1494
1495 In the image can be seen that, according to Newton's third law, the reactions between the beams have a different sense. And we assign the same magnitude or unknown data. The Stationary reference system set the gravity value to default. Now to the element Beam that represent the vertical beam, that we call @emph{OAB}:
1496
1497 @sp 1
1498
1499 @table @strong
1500
1501 @item Name
1502 OAB
1503
1504 @item m
1505 0
1506
1507 @item lc
1508 0
1509
1510 @item ang
1511 90
1512
1513 @end table
1514
1515 @sp 1
1516
1517 This beam is composed of three elements, which represent the points O, A and B. For the element in O, and their respective reactions, called Rx, Ry, M, we have:
1518
1519 @sp 1
1520
1521 @table @strong
1522
1523 @item Name
1524 OAB
1525
1526 @item l
1527 0
1528
1529 @end table
1530
1531 @sp 2
1532
1533 @table @strong
1534
1535 @item f
1536 Rx
1537
1538 @end table
1539
1540 @sp 2
1541
1542 @table @strong
1543
1544 @item f
1545 Ry
1546
1547 @end table
1548
1549 @sp 2
1550
1551 @table @strong
1552
1553 @item M
1554 M
1555
1556 @end table
1557
1558 @sp 1
1559
1560 For the element in A and their respective reactions, RAx and RAy, we have:
1561
1562 @sp 1
1563
1564 @table @strong
1565
1566 @item Name
1567 OAB
1568
1569 @item l
1570 1.8
1571
1572 @end table
1573
1574 @sp 2
1575
1576 @table @strong
1577
1578 @item f
1579 RAx
1580
1581 @end table
1582
1583 @sp 2
1584
1585 @table @strong
1586
1587 @item f
1588 RAy
1589
1590 @end table
1591
1592 @sp 1
1593
1594 For the element in B and their respective reactions, RBx and RBy, we have:
1595
1596 @sp 1
1597
1598 @table @strong
1599
1600 @item Name
1601 OAB
1602
1603 @item l
1604 2.5
1605
1606 @end table
1607
1608 @sp 2
1609
1610 @table @strong
1611
1612 @item f
1613 RBx
1614
1615 @end table
1616
1617 @table @strong
1618
1619 @sp 2
1620
1621 @item f
1622 RBy
1623
1624 @end table
1625
1626 @sp 1
1627
1628 Now for the element Beam representing the horizontal beam, that we call @emph{AC}, we have:
1629
1630 @sp 1
1631
1632 @table @strong
1633
1634 @item Name
1635 AC
1636
1637 @item m
1638 0
1639
1640 @item lc
1641 0
1642
1643 @item ang
1644 0
1645
1646 @end table
1647
1648 @sp 1
1649
1650 For the element of beam that represent the point A, and to its respective reactions, we have:
1651
1652 @sp 1
1653
1654 @table @strong
1655
1656 @item Name
1657 AC
1658
1659 @item l
1660 0
1661
1662 @end table
1663
1664 @sp 2
1665
1666 @table @strong
1667
1668 @item f
1669 RAx
1670
1671 @end table
1672
1673 @sp 2
1674
1675 @table @strong
1676
1677 @item f
1678 RAy
1679
1680 @end table
1681
1682 @sp 1
1683
1684 To the element of beam at point C, for the reactions RCx, RCy and to the weight of 50 kg (@code{50 kg*9.81 m/s2 = 490.5 N}), we have:
1685
1686 @sp 1
1687
1688 @table @strong
1689
1690 @item Name
1691 AC
1692
1693 @item l
1694 1.3
1695
1696 @end table
1697
1698 @sp 2
1699
1700 @table @strong
1701
1702 @item f
1703 RCx
1704
1705 @end table
1706
1707 @sp 2
1708
1709 @table @strong
1710
1711 @item f
1712 RCy
1713
1714 @end table
1715
1716 @sp 2
1717
1718 @table @strong
1719
1720 @item f
1721 490.500
1722
1723 @end table
1724
1725 @sp 1
1726
1727 Now to the element Beam that represent the beam from B to C, that we call @emph{BC} (here the angle is entered as slope -0.7/1.3):
1728
1729 @sp 1
1730
1731 @table @strong
1732
1733 @item Name
1734 BC
1735
1736 @item m
1737 0
1738
1739 @item lc
1740 0
1741
1742 @item ang
1743 -28.301
1744
1745 @end table
1746
1747 @sp 1
1748
1749 To the element of beam at B and to its reactions, we have:
1750
1751 @sp 1
1752
1753 @table @strong
1754
1755 @item Name
1756 BC
1757
1758 @item l
1759 0
1760
1761 @end table
1762
1763 @sp 2
1764
1765 @table @strong
1766
1767 @item f
1768 RBx
1769
1770 @end table
1771
1772 @sp 2
1773
1774 @table @strong
1775
1776 @item f
1777 RBy
1778
1779 @end table
1780
1781 @sp 1
1782
1783 For the element of beam at C, we should calculate the distance between B and C. Which can be calculated with @code{hypot(0.7,1.3)}:
1784
1785 @sp 1
1786
1787 @table @strong
1788
1789 @item Name
1790 BC
1791
1792 @item l
1793 1.476
1794
1795 @end table
1796
1797 @sp 1
1798
1799 And to the reactions RCx and RCy (we don't add here the weight of the 50 kg, because was added at the beam AC):
1800
1801 @sp 1
1802
1803 @table @strong
1804
1805 @item f
1806 RCx
1807
1808 @end table
1809
1810 @sp 2
1811
1812 @table @strong
1813
1814 @item f
1815 RCy
1816
1817 @end table
1818
1819 @sp 1
1820
1821 Now click in the icon Solve to get the answer:
1822
1823 @example
1824
1825 RAx = 910.919 N ; RAy = -0.000 N ; RCy = 490.500 N ;
1826 RCx = 910.919 N ; RBx = 910.919 N ; RBy = 490.500 N ;
1827 M = 637.643 N*m ; Ry = 490.500 N ; Rx = 0.000 N ;
1828 Status = success.
1829
1830 @end example
1831
1832 @strong{Note:} @emph{A more easy way to solve this problem (that avoid having to calculating the length of the beam BC), is replace the BC beam with two elements Beam of 2 forces (notice that the beam BC is an element that supports two forces). See image below. Everything is a matter of deciding which is best for the problem to solve. The beam AC is also a beam of two forces. However, we can't replace both.}
1833
1834 @center @image{sr-e10-3, 9cm}
1835
1836 @page
1837
1838
1839 @node Example 11 (rs), Example 12 (rs), Example 10 (rs), Examples statics rigid bodies
1840 @section Example 11
1841
1842 @cindex Example 11 (rs)
1843
1844 A uniform block of 25 kg and 50 cm of edge, as show the image below, is placed on a slope of 20 degrees. If we want move up the block as fast as possible (constant speed) by the horizontal force F, What is the maximum possible coefficient of friction? Which is the force?
1845
1846 @center @image{sr-e11-1, 6cm}
1847
1848 @sp 2
1849
1850 @strong{Solution with FisicaLab}
1851
1852 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Solid, two elements of solid and the necessary elements Force and Friction, as show the image below:
1853
1854 @center @image{sr-e11-2, 6cm}
1855
1856 The Stationary reference system set the gravity value to default. Now to the element Solid, that we call @emph{Block} we have:
1857
1858 @sp 1
1859
1860 @table @strong
1861
1862 @item Name
1863 Block
1864
1865 @item m
1866 25
1867
1868 @item xc
1869 25 @@ cm
1870
1871 @item yc
1872 25 @@ cm
1873
1874 @item ang
1875 20
1876
1877 @end table
1878
1879 @sp 1
1880
1881 To the element of solid that represent the upper corner, where is applied the force F, we have:
1882
1883 @sp 1
1884
1885 @table @strong
1886
1887 @item Name
1888 Block
1889
1890 @item x
1891 0
1892
1893 @item y
1894 50 @@ cm
1895
1896 @end table
1897
1898 @sp 1
1899
1900 And to the horizontal force:
1901
1902 @sp 1
1903
1904 @table @strong
1905
1906 @item f
1907 F
1908
1909 @end table
1910
1911 @sp 1
1912
1913 The normal force and the friction are applied to the element of solid that represent the lower right corner. Because when we move up the block as fast as possible, the tipping is imminent. Then, we have:
1914
1915 @sp 1
1916
1917 @table @strong
1918
1919 @item Name
1920 Block
1921
1922 @item x
1923 50 @@ cm
1924
1925 @item y
1926 0
1927
1928 @end table
1929
1930 @sp 1
1931
1932 To the force that represent the normal force:
1933
1934 @sp 1
1935
1936 @table @strong
1937
1938 @item f
1939 N
1940
1941 @item ang
1942 70
1943
1944 @end table
1945
1946 @sp 1
1947
1948 And to the friction:
1949
1950 @sp 1
1951
1952 @table @strong
1953
1954 @item Normal
1955 N
1956
1957 @item ang
1958 20
1959
1960 @item u
1961 u
1962
1963 @end table
1964
1965 @sp 1
1966
1967 Now click in the icon Solve to get the answer:
1968
1969 @example
1970
1971 F = 262.970 N ; N = 320.401 N ; u = 0.509 ad ;
1972 Status = success.
1973
1974 @end example
1975
1976 @page
1977
1978
1979 @node Example 12 (rs), Example 13 (rs), Example 11 (rs), Examples statics rigid bodies
1980 @section Example 12
1981
1982 @cindex Example 12 (rs)
1983
1984 In the structure of the image all the joints are pin joints. Ignoring the weight of the beams, get all the reactions in the joints.
1985
1986 @center @image{sr-e12-1, 7cm}
1987
1988 @sp 2
1989
1990 @strong{Solution with FisicaLab}
1991
1992 Notice that the beams BE and CF are beams of two forces. So, we build the problem with two elements Beam, and the necessary elements Force and Beams of 2 forces, as show below:
1993
1994 @center @image{sr-e12-2, 7cm}
1995
1996 The Stationary reference system set the gravity value to default. Now to the element Beam that represent the ABC beam, we have:
1997
1998 @sp 1
1999
2000 @table @strong
2001
2002 @item Name
2003 ABC
2004
2005 @item m
2006 0
2007
2008 @item lc
2009 0
2010
2011 @item ang
2012 90
2013
2014 @end table
2015
2016 @sp 1
2017
2018 This beam have three elements: A, B and C. To the element that correspond with A:
2019
2020 @sp 1
2021
2022 @table @strong
2023
2024 @item Name
2025 ABC
2026
2027 @item l
2028 0
2029
2030 @end table
2031
2032 @sp 1
2033
2034 And to the applied Forces, the reactions:
2035
2036 @sp 1
2037
2038 @table @strong
2039
2040 @item f
2041 RAx
2042
2043 @end table
2044
2045 @sp 2
2046
2047 @table @strong
2048
2049 @item f
2050 RAy
2051
2052 @end table
2053
2054 @sp 1
2055
2056 Now to the element that correspond with B:
2057
2058 @sp 1
2059
2060 @table @strong
2061
2062 @item Name
2063 ABC
2064
2065 @item l
2066 22 @@ cm
2067
2068 @end table
2069
2070 @sp 1
2071
2072 And to the element Beam of 2 forces, that correspond with the beam from B to E, the angle is entered as the slope 22/50:
2073
2074 @sp 1
2075
2076 @table @strong
2077
2078 @item f
2079 BE
2080
2081 @item ang
2082 23.749
2083
2084 @end table
2085
2086 @sp 1
2087
2088 To the element that correspond with C:
2089
2090 @sp 1
2091
2092 @table @strong
2093
2094 @item Name
2095 ABC
2096
2097 @item l
2098 95 @@ cm
2099
2100 @end table
2101
2102 @sp 1
2103
2104 To the element Force, that correspond with the force of 450 N:
2105
2106 @sp 1
2107
2108 @table @strong
2109
2110 @item f
2111 450
2112
2113 @end table
2114
2115 @sp 1
2116
2117 And to the element Beam of 2 forces, that correspond with the beam from C to F, the angle is entered as the slope 23/50:
2118
2119 @sp 1
2120
2121 @table @strong
2122
2123 @item f
2124 CF
2125
2126 @item ang
2127 24.702
2128
2129 @end table
2130
2131 @sp 1
2132
2133 Now to the element Beam that represent the DEF beam, we have:
2134
2135 @sp 1
2136
2137 @table @strong
2138
2139 @item Name
2140 DEF
2141
2142 @item m
2143 0
2144
2145 @item lc
2146 0
2147
2148 @item ang
2149 90
2150
2151 @end table
2152
2153 @sp 1
2154
2155 This beam have three elements: D, E and F. To the element that correspond with D:
2156
2157 @sp 1
2158
2159 @table @strong
2160
2161 @item Name
2162 DEF
2163
2164 @item l
2165 0
2166
2167 @end table
2168
2169 @sp 1
2170
2171 And to the applied Forces, the reactions:
2172
2173 @sp 1
2174
2175 @table @strong
2176
2177 @item f
2178 RDy
2179
2180 @end table
2181
2182 @sp 2
2183
2184 @table @strong
2185
2186 @item f
2187 RDx
2188
2189 @end table
2190
2191 @sp 1
2192
2193 To the element that correspond with E:
2194
2195 @sp 1
2196
2197 @table @strong
2198
2199 @item Name
2200 DEF
2201
2202 @item l
2203 44 @@ cm
2204
2205 @end table
2206
2207 @sp 1
2208
2209 And to the element Beam of 2 forces, that correspond with the beam from B to E, the angle is also the slope 22/50:
2210
2211 @sp 1
2212
2213 @table @strong
2214
2215 @item f
2216 BE
2217
2218 @item ang
2219 23.749
2220
2221 @end table
2222
2223 @sp 1
2224
2225 To the element that correspond with F:
2226
2227 @sp 1
2228
2229 @table @strong
2230
2231 @item Name
2232 DEF
2233
2234 @item l
2235 72 @@ cm
2236
2237 @end table
2238
2239 @sp 1
2240
2241 And to the element Beam of 2 forces, that correspond with the beam from C to F, the angle is also the slope 23/50:
2242
2243 @sp 1
2244
2245 @table @strong
2246
2247 @item f
2248 CF
2249
2250 @item ang
2251 24.702
2252
2253 @end table
2254
2255 @sp 1
2256
2257 Now click in the icon Solve to get the answer:
2258
2259 @example
2260
2261 RDy = 854.981 N ; RDx = -461.094 N ;
2262 BE = -1295.364 N [tension] ;
2263 CF = 797.558 N [compression] ; RAy = -854.981 N ;
2264 RAx = 911.094 N ;
2265 Status = success.
2266
2267 @end example
2268
2269 @page
2270
2271
2272 @node Example 13 (rs), , Example 12 (rs), Examples statics rigid bodies
2273 @section Example 13
2274
2275 @cindex Example 13 (rs)
2276
2277 In the truss of the image, find the support reactions and internal forces in all beams under the load conditions shown.
2278
2279 @center @image{sr-e13-1, 9cm}
2280
2281 @sp 2
2282
2283 @strong{Solution with FisicaLab}
2284
2285 Select the group Static and, inside this, the module Static of solids. Erase the content of the chalkboard and select the English system. Then add one element Truss, eight elements Joint of truss, eight elements Force, five forces for the load forces and three for the support reactions (notice that in support A there is only one vertical force), and 26 elements Beam of truss to build the problem as show below:
2286
2287 @center @image{sr-e13-2, 9cm}
2288
2289 To the element Truss, we use the name AH:
2290
2291 @sp 1
2292
2293 @table @strong
2294
2295 @item Name
2296 AH
2297
2298 @end table
2299
2300 @sp 1
2301
2302 All the elements Joint of truss, will owned by this truss. So, we add each joint to this truss:
2303
2304 @sp 1
2305
2306 @table @strong
2307
2308 @item Truss
2309 AH
2310
2311 @end table
2312
2313 @sp 1
2314
2315 For the two elements Beam of truss that represent the beam from joint A to C, and calling AC the internal force, we have:
2316
2317 @sp 1
2318
2319 @table @strong
2320
2321 @item t
2322 AC
2323
2324 @end table
2325
2326 @sp 1
2327
2328 Now for the two elements Beam of truss that represent the beam from joint A to B, and calling AB the internal force and entering the angle as the slope 6/8, we have:
2329
2330 @sp 1
2331
2332 @table @strong
2333
2334 @item t
2335 AB
2336
2337 @item ang
2338 36.870
2339
2340 @end table
2341
2342 @sp 1
2343
2344 For the two elements Beam of truss that represent the beam from joint B to C, and calling BC the internal force, we have:
2345
2346 @sp 1
2347
2348 @table @strong
2349
2350 @item t
2351 BC
2352
2353 @end table
2354
2355 @sp 1
2356
2357 For the two elements Beam of truss that represent the beam from joint B to E, and calling BE the internal force, we have:
2358
2359 @sp 1
2360
2361 @table @strong
2362
2363 @item t
2364 BD
2365
2366 @item ang
2367 16.260
2368
2369 @end table
2370
2371 @sp 1
2372
2373 Here the angle is entered as slope 28/96. The numerator and denominator should be at the same units: 2 ft 4 in = 28 in and 6 ft = 96 in. Also can be used 2.333/6 using the feet unit. Now for the two elements Beam of truss that represent the beam from joint B to E, and calling BE the internal force, we have:
2374
2375 @sp 1
2376
2377 @table @strong
2378
2379 @item t
2380 BE
2381
2382 @item ang
2383 36.870
2384
2385 @end table
2386
2387 @sp 1
2388
2389 Here the angle is also the slope 6/8. For the two elements Beam of truss that represent the beam from joint C to E, and calling CE the internal force, we have:
2390
2391 @sp 1
2392
2393 @table @strong
2394
2395 @item t
2396 CE
2397
2398 @end table
2399
2400 @sp 1
2401
2402 For the two elements Beam of truss that represent the beam from joint D to E, and calling DE the internal force, we have:
2403
2404 @sp 1
2405
2406 @table @strong
2407
2408 @item t
2409 DE
2410
2411 @end table
2412
2413 @sp 1
2414
2415 Now for the two elements Beam of truss that represent the beam from joint D to F, and calling DF the internal force, we have:
2416
2417 @sp 1
2418
2419 @table @strong
2420
2421 @item t
2422 DF
2423
2424 @item ang
2425 16.260
2426
2427 @end table
2428
2429 @sp 1
2430
2431 Here the angle is entered as slope 28/96. For the two elements Beam of truss that represent the beam from joint E to F, and calling EF the internal force, we have:
2432
2433 @sp 1
2434
2435 @table @strong
2436
2437 @item t
2438 EF
2439
2440 @item ang
2441 36.870
2442
2443 @end table
2444
2445 @sp 1
2446
2447 Here the angle is entered as slope 6/8. Now for the two elements Beam of truss that represent the beam from joint E to G, and calling EG the internal force, we have:
2448
2449 @sp 1
2450
2451 @table @strong
2452
2453 @item t
2454 EG
2455
2456 @end table
2457
2458 @sp 1
2459
2460 For the two elements Beam of truss that represent the beam from joint F to G, and calling FG the internal force, we have:
2461
2462 @sp 1
2463
2464 @table @strong
2465
2466 @item t
2467 FG
2468
2469 @end table
2470
2471 @sp 1
2472
2473 For the two elements Beam of truss that represent the beam from joint F to H, and calling FH the internal force, we have:
2474
2475 @sp 1
2476
2477 @table @strong
2478
2479 @item t
2480 FH
2481
2482 @item ang
2483 36.870
2484
2485 @end table
2486
2487 @sp 1
2488
2489 Here the angle is entered as slope 6/8. Now for the two elements Beam of truss that represent the beam from joint G to H, and calling GH the internal force, we have:
2490
2491 @sp 1
2492
2493 @table @strong
2494
2495 @item t
2496 GH
2497
2498 @end table
2499
2500 @sp 1
2501
2502 Now to the element Force that represent the reaction in A:
2503
2504 @sp 1
2505
2506 @table @strong
2507
2508 @item f
2509 RAy
2510
2511 @end table
2512
2513 @sp 1
2514
2515 And to the two elements Force that represent the reactions in H:
2516
2517 @sp 1
2518
2519 @table @strong
2520
2521 @item f
2522 RHy
2523
2524 @end table
2525
2526 @sp 2
2527
2528 @table @strong
2529
2530 @item f
2531 RHx
2532
2533 @end table
2534
2535 @sp 1
2536
2537 Now to the elements Force that represent the load forces, three of 600 lb and two of 300 lb:
2538
2539 @sp 1
2540
2541 @table @strong
2542
2543 @item f
2544 300
2545
2546 @end table
2547
2548 @sp 2
2549
2550 @table @strong
2551
2552 @item f
2553 600
2554
2555 @end table
2556
2557 @sp 1
2558
2559 Now click in the icon Solve to get the answer:
2560
2561 @example
2562
2563 FG = 0.000 lb [tension] ; EF = -59.993 lb [compression] ;
2564 DF = -1200.000 lb [compression] ; RAy = 1200.000 lb ;
2565 FH = -1499.996 lb [compression] ;
2566 AC = 1199.996 lb [tension] ;
2567 AB = -1499.996 lb [compression] ;
2568 GH = 1199.996 lb [tension] ;
2569 RHy = 1200.000 lb ; RHx = 0.000 lb ;
2570 BC = -0.000 lb [compression] ;
2571 CE = 1199.996 lb [tension] ;
2572 BD = -1200.000 lb [compression] ;
2573 DE = 71.992 lb [tension] ; BE = -59.993 lb [compression] ;
2574 EG = 1199.996 lb [tension] ;
2575 Status = success.
2576
2577 @end example
2578