Debian Codegraph @

Documentation/Manual/English/dynamics-circular-examples.texinfo

raw
1 @c -*-texinfo-*-
2 @c This is part of the FisicaLab User Manual.
3 @c Copyright (C) 2013 German A. Arias.
4 @c See the file copying.texinfo for copying conditions.
5
6 @node Examples circular dynamics, Calorimetry, Circular dynamics, Top
7 @chapter Examples circular dynamics of particles
8
9 @cindex Examples circular dynamics of particles
10
11
12 @menu
13 * Example 1 (cd)::
14 * Example 2 (cd)::
15 * Example 3 (cd)::
16 * Example 4 (cd)::
17 * Example 5 (cd)::
18 * Example 6 (cd)::
19 * Example 7 (cd)::
20 * Example 8 (cd)::
21 * Example 9 (cd)::
22 * Example 10 (cd)::
23 * Example 11 (cd)::
24 * Example 12 (cd)::
25 * Example 13 (cd)::
26 @end menu
27
28
29 @node Example 1 (cd), Example 2 (cd), Examples circular dynamics, Examples circular dynamics
30 @section Example 1
31
32 @cindex Example 1 (cd)
33
34 The curve of a road section has a steepness of 18 degrees and a curvature radius of 230 meters. If the coefficient of static friction between the tires of a car and the road is 0.33, find: a) The maximum speed at which the car can make the turn, b) The speed for which there is no friction force between the tires and the road and, c) The minimum speed at which the car can make the turn.
35
36 @sp 2
37
38 @strong{Solution with FisicaLab}
39
40 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Mobile with perpendicular circular movement, one element Force and one element Friction. As show the image below:
41
42 @center @image{dc-e1-1, 4cm}
43
44 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. Now to the element Mobile with perpendicular circular movement, that represent the car, and since the car's mass is not provided (it is irrelevant for the requested data), we write 1 kg, and we add the conversion factor km/h to the velocity. Also we write as unknown the tangential force, even when tangential acceleration is 0, to satisfy the requirement of number of unknowns. And we let the center of rotation placed to the right, that corresponds with the applied forces:
45
46 @sp 1
47
48 @table @strong
49
50 @item Name
51 0
52
53 @item m
54 1
55
56 @item vt
57 vt @@ km/h
58
59 @item r
60 230
61
62 @item at
63 0
64
65 @item Ft
66 Ft
67
68 @item C
69 >
70
71 @end table
72
73 @sp 1
74
75 For the element Force, which represents the normal, and taking into account that the steepness of the curve is 18 degrees, we have:
76
77 @sp 1
78
79 @table @strong
80
81 @item f
82 normal
83
84 @item ang
85 72
86
87 @end table
88
89 @sp 1
90
91 And to the friction force:
92
93 @sp 1
94
95 @table @strong
96
97 @item N
98 normal
99
100 @item u
101 0.33
102
103 @item ang
104 18
105
106 @end table
107
108 @sp 1
109
110 Now click in the icon Solve to get the answer:
111
112 @example
113
114 normal = 11.554 N ; vt = 146.462 km/h ; Ft = 0.000 N ;
115 Status = success.
116
117 @end example
118
119 For part b, first remove the friction element, since there should be no friction force:
120
121 @center @image{dc-e1-2, 4cm}
122
123 And click in the icon Solve to get the answer:
124
125 @example
126
127 normal = 10.315 N ; vt = 97.474 km/h ; Ft = 0.000 N ;
128 Status = success.
129
130 @end example
131
132 Now to part c, add again a friction force:
133
134 @center @image{dc-e1-3, 4cm}
135
136 With data:
137
138 @sp 1
139
140 @table @strong
141
142 @item N
143 normal
144
145 @item u
146 0.33
147
148 @item ang
149 18
150
151 @end table
152
153 @sp 1
154
155 And click again in the icon Solve to get the answer:
156
157 @example
158
159 normal = 9.316 N ; vt = 0.503 km/h ; Ft = 0.000 N ;
160 Status = the iteration has not converged yet.
161
162 @end example
163
164 What does this mean? That there is no minimum speed. The given coefficient of friction is enough for park the car on the curve without slipping.
165
166 @page
167
168
169 @node Example 2 (cd), Example 3 (cd), Example 1 (cd), Examples circular dynamics
170 @section Example 2
171
172 @cindex Example 2 (cd)
173
174 A small block A is on a table that rotates from rest with a constant tangential acceleration. If the coefficient of static friction between the block and the turntable is 0.57, find the minimum interval of time for the block to reach a speed of 1.2 m/s without slip.
175
176 @center @image{dc-e2-1, 5cm}
177
178 @sp 2
179
180 @strong{Solution with FisicaLab}
181
182 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, two elements Mobile with circular movement, one element Mobile with perpendicular circular movement, two element Force, one element Angular momentum, one element Moment of a force and one element Maximum acceleration. As show the image below:
183
184 @center @image{dc-e2-2, 7cm}
185
186 The element Stationary reference system write to default the gravity value. And the time is unknown.
187
188 @sp 1
189
190 @table @strong
191
192 @item g
193 9.81
194
195 @item t
196 time
197
198 @end table
199
200 @sp 1
201
202 The mass of the block is not provided, since it is irrelevant to what is asked. But as we need to specify a mass, will place 1 kg. Thus, for the element Mobile with circular movement placed at left, which represents the initial state, we have:
203
204 @sp 1
205
206 @table @strong
207
208 @item Name
209 initial
210
211 @item m
212 1
213
214 @item vt
215 0
216
217 @item r
218 40 @@ cm
219
220 @item y
221 0
222
223 @end table
224
225 @sp 1
226
227 For the another element Mobile with circular movement, placed at right, which represents the final state, we have:
228
229 @sp 1
230
231 @table @strong
232
233 @item Name
234 final
235
236 @item m
237 1
238
239 @item vt
240 1.2
241
242 @item r
243 40 @@ cm
244
245 @item y
246 0
247
248 @end table
249
250 @sp 1
251
252 Now we add both objects to element Angular momentum, where M is the moment that causes the acceleration of the block:
253
254 @sp 1
255
256 @table @strong
257
258 @item System i
259 initial
260
261 @item System f
262 final
263
264 @item M
265 M
266
267 @end table
268
269 @sp 1
270
271 The element Mobile with perpendicular circular motion is used to set additional conditions on the final state. Calling it A and leaving the center of rotation to the right, we have (both, the tangential acceleration and the tangential force, are unknowns):
272
273 @sp 1
274
275 @table @strong
276
277 @item Name
278 A
279
280 @item m
281 1
282
283 @item vt
284 1.2
285
286 @item r
287 40 @@ cm
288
289 @item at
290 at
291
292 @item Ft
293 Ft
294
295 @item C
296 >
297
298 @end table
299
300 @sp 1
301
302 And in the element Maximum acceleration, we add the coefficient of friction, which ensures that both, the tangential force (Ft) and the centripetal force, are due to the maximum friction force:
303
304 @sp 1
305
306 @table @strong
307
308 @item Object
309 A
310
311 @item u
312 0.57
313
314 @end table
315
316 @sp 1
317
318 Now the element Moment of a force, is used to relate the maximum tangential force (Ft) with the applied moment:
319
320 @sp 1
321
322 @table @strong
323
324 @item M
325 M
326
327 @item f
328 Ft
329
330 @item d
331 40 @@ cm
332
333 @end table
334
335 @sp 1
336
337 Finally, for normal and centripetal forces we have, respectively:
338
339 @sp 1
340
341 @table @strong
342
343 @item f
344 normal
345
346 @end table
347
348 @sp 2
349
350 @table @strong
351
352 @item f
353 centripetal
354
355 @end table
356
357 @sp 1
358
359 Now click in the icon Solve to get the answer:
360
361 @example
362
363 centripetal = 3.600 N ; time = 0.280 s ; M = 1.711 N*m ;
364 at = 4.279 m/s2 ; Ft = 4.279 N ; normal = 9.810 N ;
365 Status = success.
366
367 @end example
368
369 The minimum time is 0.28 seconds.
370
371 @page
372
373
374 @node Example 3 (cd), Example 4 (cd), Example 2 (cd), Examples circular dynamics
375 @section Example 3
376
377 @cindex Example 3 (cd)
378
379 A 1.7 kg collar is attached to a spring and can sliding in a vertical plane (no friction) along the bar ABC. The spring constant is 550 N/m and is undeformed when its length is 16 cm. If the collar is released in A (V = 0), find its speed when passing through B.
380
381 @center @image{dc-e3-1, 8cm}
382
383 @sp 2
384
385 @strong{Solution with FisicaLab}
386
387 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Object in rest, one element Mobile with circular movement, two elements Spring, two elements Force, one element Initial system, one element Final system and one element Energy. As show the image below:
388
389 @center @image{dc-e3-2, 5cm}
390
391 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. To the element Object in rest, which represents the collar in A, and taking this position as the horizontal reference:
392
393 @sp 1
394
395 @table @strong
396
397 @item Name
398 initialCollar
399
400 @item m
401 1.7
402
403 @item y
404 0
405
406 @end table
407
408 @sp 1
409
410 And for the element Spring corresponding to the initial state:
411
412 @sp 1
413
414 @table @strong
415
416 @item Name
417 initialSpring
418
419 @item k
420 550
421
422 @item x
423 7 @@ cm
424
425 @end table
426
427 @sp 1
428
429 To the element Force applied to it:
430
431 @sp 1
432
433 @table @strong
434
435 @item f
436 initialForce
437
438 @end table
439
440 @sp 1
441
442 Both, the element Spring and the element Object in rest, corresponds to the initial state, so we add them to the element Initial system, that we call @emph{initial}:
443
444 @sp 1
445
446 @table @strong
447
448 @item Name
449 initial
450
451 @item Object 1
452 initialCollar
453
454 @item Object 2
455 initialSpring
456
457 @item Object 3
458 0
459
460 @item Object 4
461 0
462
463 @end table
464
465 @sp 1
466
467 Now for the element Mobile with circular movement, representing the collar when passing through point B, we have (we do not know the data of the turning radius, but is irrelevant to this problem):
468
469 @sp 1
470
471 @table @strong
472
473 @item Name
474 finalCollar
475
476 @item m
477 1.7
478
479 @item vt
480 vt
481
482 @item r
483 0
484
485 @item y
486 -18 @@ cm
487
488 @end table
489
490 @sp 1
491
492 For the element Spring that corresponds to the final state:
493
494 @sp 1
495
496 @table @strong
497
498 @item Name
499 finalSpring
500
501 @item k
502 550
503
504 @item x
505 2 @@ cm
506
507 @end table
508
509 @sp 1
510
511 And to the applied force:
512
513 @sp 1
514
515 @table @strong
516
517 @item f
518 finalForce
519
520 @end table
521
522 @sp 1
523
524 Now add this element Spring and the element Mobile with circular movement, which represents the final state, to the element Final system, that we call @emph{final}:
525
526 @sp 1
527
528 @table @strong
529
530 @item Name
531 final
532
533 @item Object 1
534 finalCollar
535
536 @item Object 2
537 finalSpring
538
539 @item Object 3
540 0
541
542 @item Object 4
543 0
544
545 @end table
546
547 @sp 1
548
549 Finally, add the elements initial and final system in the element Energy. And knowing that energy is conserved, we have:
550
551 @sp 1
552
553 @table @strong
554
555 @item System i
556 initial
557
558 @item System f
559 final
560
561 @item W
562 0
563
564 @end table
565
566 @sp 1
567
568 Now click in the icon Solve to get the answer:
569
570 @example
571
572 vt = 2.233 m/s ; initialForce = 38.500 N ;
573 finalForce = 11.000 N ;
574 Status = success.
575
576 @end example
577
578 @page
579
580
581 @node Example 4 (cd), Example 5 (cd), Example 3 (cd), Examples circular dynamics
582 @section Example 4
583
584 @cindex Example 4 (cd)
585
586 A 1.5 kg collar can slide without friction along a horizontal bar and is attached to two springs of constant 380 N/m, whose undeformed length is 2 cm. If the collar is released from rest in position A, find its speed when passing through point B.
587
588 @center @image{dc-e4-1, 7cm}
589
590 @sp 2
591
592 @strong{Solution with FisicaLab}
593
594 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Object in rest, one element Mobile with linear movement, four elements Spring, seven elements Force, one element Initial system, one element Final system and one element Energy. As show the image below:
595
596 @center @image{dc-e4-2, 9cm}
597
598 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. To the element Object in rest, which represents the collar in A, we have:
599
600 @sp 1
601
602 @table @strong
603
604 @item Name
605 initialCollar
606
607 @item m
608 1.5
609
610 @item y
611 0
612
613 @end table
614
615 @sp 1
616
617 To the Spring element in the vertical position, we have (this spring is neither stretched nor compressed):
618
619 @sp 1
620
621 @table @strong
622
623 @item Name
624 springOne
625
626 @item k
627 380
628
629 @item x
630 0
631
632 @end table
633
634 @sp 1
635
636 Now for the force applied to the spring:
637
638 @sp 1
639
640 @table @strong
641
642 @item f
643 forceOne
644
645 @end table
646
647 @sp 1
648
649 And to the second spring at the initial state, previously we get the stretched distance, we have (this operation can be done with @code{hypot(6,2)-2 @ cm}):
650
651 @center @image{dc-e4-3, 7cm}
652
653 @sp 1
654
655 @table @strong
656
657 @item Name
658 springTwo
659
660 @item k
661 380
662
663 @item x
664 4.325 @@ cm
665
666 @end table
667
668 @sp 1
669
670 And to the applied force (here the angle is irrelevant):
671
672 @sp 1
673
674 @table @strong
675
676 @item f
677 forceTwo
678
679 @item ang
680 0
681
682 @end table
683
684 @sp 1
685
686 The element Object in rest and the two springs, are the initial state. Then we add them to the Initial system element, that we call @emph{initial}:
687
688 @sp 1
689
690 @table @strong
691
692 @item Name
693 initial
694
695 @item Object 1
696 initialCollar
697
698 @item Object 2
699 springOne
700
701 @item Object 3
702 springTwo
703
704 @item Object 4
705 0
706
707 @end table
708
709 @sp 1
710
711 For the element Mobile with linear movement, which represents the collar at point B, and since the movement is horizontal (angle = 0) and the acceleration is unknown, we have (the coordinates x,y are irrelevant to this problem):
712
713 @sp 1
714
715 @table @strong
716
717 @item Name
718 finalCollar
719
720 @item m
721 1.5
722
723 @item v
724 v
725
726 @item x
727 0
728
729 @item y
730 0
731
732 @item ang
733 0
734
735 @item a
736 acceleration
737
738 @end table
739
740 @sp 1
741
742 For the vertical force, which represents the normal applied by the horizontal bar, we have:
743
744 @sp 1
745
746 @table @strong
747
748 @item f
749 normal
750
751 @end table
752
753 @sp 1
754
755 Now, to the force applied at left, the force applied by the spring to the left, and entering the angle as 2/2, we have:
756
757 @sp 1
758
759 @table @strong
760
761 @item f
762 forceThree
763
764 @item ang
765 45.000
766
767 @end table
768
769 @sp 1
770
771 And to the force applied at right, the force applied by the spring to the right, and entering the angle as 2/4, we have:
772
773 @sp 1
774
775 @table @strong
776
777 @item f
778 forceFour
779
780 @item ang
781 26.565
782
783 @end table
784
785 @sp 1
786
787 Now to the Spring element at left, previously we get the stretched distance (this operation can be done with @code{hypot(2,2)-2 @ cm}):
788
789 @center @image{dc-e4-4, 7cm}
790
791 @sp 1
792
793 @table @strong
794
795 @item Name
796 springThree
797
798 @item k
799 380
800
801 @item x
802 0.828 @@ cm
803
804 @end table
805
806 @sp 1
807
808 And to the applied force (here the angle is irrelevant):
809
810 @sp 1
811
812 @table @strong
813
814 @item f
815 forceThree
816
817 @item ang
818 0
819
820 @end table
821
822 @sp 1
823
824 Now to the Spring element at right we have, previously we get the stretched distance (this operation can be done with @code{hypot(4,2)-2 @ cm}):
825
826 @center @image{dc-e4-5, 7cm}
827
828 @sp 1
829
830 @table @strong
831
832 @item Name
833 springFour
834
835 @item k
836 380
837
838 @item x
839 2.472 @@ cm
840
841 @end table
842
843 @sp 1
844
845 And to the applied force (here the angle is irrelevant):
846
847 @sp 1
848
849 @table @strong
850
851 @item f
852 forceFour
853
854 @item ang
855 0
856
857 @end table
858
859 @sp 1
860
861 The element Mobile with linear movement and the two previous springs, are the final state. Then we add them to the Final system element, that we call @emph{final}:
862
863 @sp 1
864
865 @table @strong
866
867 @item Name
868 final
869
870 @item Object 1
871 finalCollar
872
873 @item Object 2
874 springThree
875
876 @item Object 3
877 springFour
878
879 @item Object 4
880 0
881
882 @end table
883
884 @sp 1
885
886 Finally, add the elements initial and final system in the element Energy. And knowing that energy is conserved, we have:
887
888 @sp 1
889
890 @table @strong
891
892 @item System i
893 initial
894
895 @item System f
896 final
897
898 @item W
899 0
900
901 @end table
902
903 @sp 1
904
905 Now click in the icon Solve to get the answer:
906
907 @example
908
909 normal = 21.141 N ; forceThree = 3.146 N ;
910 forceFour = 9.394 N ; forceTwo = 16.435 N ;
911 forceOne = -0.000 N ; v = 0.549 m/s ;
912 acceleration = 4.118 m/s2 ;
913 Status = success.
914
915 @end example
916
917 The collar speed is 0,549 m/s.
918
919 @page
920
921
922 @node Example 5 (cd), Example 6 (cd), Example 4 (cd), Examples circular dynamics
923 @section Example 5
924
925 @cindex Example 5 (cd)
926
927 A collar of 430 grams can slide without friction along a horizontal rod, which in turn can rotate about a vertical axis. A spring of constant 4 N/m, whose undeformed length is 70 cm, holds the collar to the bar, as shown in the figure below. Initially the bar is turning with a constant angular velocity of 13 rad/s. While a rope holds the collar in the position A. Suddenly the rope breaks and the spring pushes the collar out. Neglecting the mass of the rod, find the tangential velocity of the collar to the position B and its radial acceleration.
928
929 @center @image{dc-e5-1, 8cm}
930
931 @sp 2
932
933 @strong{Solution with FisicaLab}
934
935 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Mobile with circular movement, one element Mobile with polar circular movement, two elements Spring, three elements Force, one element Initial system, one element Final system, one element Energy, one element Angular momentum and one element Angular velocity. As show the image below:
936
937 @center @image{dc-e5-2, 8cm}
938
939 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. Now to the element Mobile with circular movement, which represents the collar in A and taking in account that tangential velocity is unknown, we have:
940
941 @sp 1
942
943 @table @strong
944
945 @item Name
946 initialCollar
947
948 @item m
949 430 @@ g
950
951 @item vt
952 vInitial
953
954 @item r
955 18 @@ cm
956
957 @item y
958 0
959
960 @end table
961
962 @sp 1
963
964 And in the element Angular velocity we set the provided angular velocity for initial state:
965
966 @sp 1
967
968 @table @strong
969
970 @item Object
971 initialCollar
972
973 @item vang
974 13
975
976 @end table
977
978 @sp 1
979
980 For the Spring element of the initial state:
981
982 @sp 1
983
984 @table @strong
985
986 @item Name
987 initialSpring
988
989 @item k
990 4
991
992 @item x
993 -52 @@ cm
994
995 @end table
996
997 @sp 1
998
999 And to the applied force:
1000
1001 @sp 1
1002
1003 @table @strong
1004
1005 @item f
1006 initialForce
1007
1008 @end table
1009
1010 @sp 1
1011
1012 Now add this element Spring and the element Mobile with circular movement, which represents the initial state, to the element Initial system, that we call @emph{initial}:
1013
1014 @sp 1
1015
1016 @table @strong
1017
1018 @item Name
1019 initial
1020
1021 @item Object 1
1022 initialCollar
1023
1024 @item Object 2
1025 initialSpring
1026
1027 @item Object 3
1028 0
1029
1030 @item Object 4
1031 0
1032
1033 @end table
1034
1035 @sp 1
1036
1037 Now to the element Mobile with polar circular movement, which represents the collar in position B, we have:
1038
1039 @sp 1
1040
1041 @table @strong
1042
1043 @item Name
1044 finalCollar
1045
1046 @item m
1047 430 @@ g
1048
1049 @item vt
1050 vtFinal
1051
1052 @item r
1053 60 @@ cm
1054
1055 @item y
1056 0
1057
1058 @item vr
1059 vrFinal
1060
1061 @item ar
1062 arFinal
1063
1064 @end table
1065
1066 @sp 1
1067
1068 And to the applied force to this element, the force applied by the spring, we have:
1069
1070 @sp 1
1071
1072 @table @strong
1073
1074 @item f
1075 finalForce
1076
1077 @end table
1078
1079 @sp 1
1080
1081 This force is necessary to find the radial acceleration. Now to the element Spring of final state:
1082
1083 @sp 1
1084
1085 @table @strong
1086
1087 @item Name
1088 finalSpring
1089
1090 @item k
1091 4
1092
1093 @item x
1094 -10 @@ cm
1095
1096 @end table
1097
1098 @sp 1
1099
1100 And to the applied force:
1101
1102 @sp 1
1103
1104 @table @strong
1105
1106 @item f
1107 finalForce
1108
1109 @end table
1110
1111 @sp 1
1112
1113 Now add this element Spring and the element Mobile with polar circular movement, which represents the final state, to the element Final system, that we call @emph{final}:
1114
1115 @sp 1
1116
1117 @table @strong
1118
1119 @item Name
1120 final
1121
1122 @item Object 1
1123 finalCollar
1124
1125 @item Object 2
1126 finalSpring
1127
1128 @item Object 3
1129 0
1130
1131 @item Object 4
1132 0
1133
1134 @end table
1135
1136 @sp 1
1137
1138 And add the elements initial and final system in the element Energy. And knowing that energy is conserved, we have:
1139
1140 @sp 1
1141
1142 @table @strong
1143
1144 @item System i
1145 initial
1146
1147 @item System f
1148 final
1149
1150 @item W
1151 0
1152
1153 @end table
1154
1155 @sp 1
1156
1157 And in the element Angular momentum, we add the elements that represents the initial and final collar:
1158
1159 @sp 1
1160
1161 @table @strong
1162
1163 @item System i
1164 initialCollar
1165
1166 @item System f
1167 finalCollar
1168
1169 @item M
1170 0
1171
1172 @end table
1173
1174 @sp 1
1175
1176 Now click in the icon Solve to get the answer:
1177
1178 @example
1179
1180 initialForce = 2.080 N ; finalForce = 0.400 N ;
1181 vInitial = 2.340 m/s ; vtFinal = 0.702 m/s ;
1182 vrFinal = 2.721 m/s ; arFinal = 0.930 m/s2 ;
1183 Status = success.
1184
1185 @end example
1186
1187 @page
1188
1189
1190 @node Example 6 (cd), Example 7 (cd), Example 5 (cd), Examples circular dynamics
1191 @section Example 6
1192
1193 @cindex Example 6 (cd)
1194
1195 A system consisting of two small spheres of 900 and 350 grams, joined by a thin rod can rotate freely about a vertical axis passing through the center of mass of the system. Initially the system is at rest when a moment of 5 N*m is applied. Neglecting the mass of the rod, find the angular velocity and angular acceleration of the system after 1.2 seconds. Find also the power applied.
1196
1197 @center @image{dc-e6-1, 7cm}
1198
1199 @sp 2
1200
1201 @strong{Solution with FisicaLab}
1202
1203 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, four elements Mobile with circular movement, one element Mobile with perpendicular circular movement, two elements Force, one element Initial system, one element Final system, one element Power, one element Angular momentum, two elements Angular velocity, one element Angular acceleration, one element Moment of a force and one element Inertia. As show the image below:
1204
1205 @center @image{dc-e6-2, 8cm}
1206
1207 The element Stationary reference system write to default the gravity value. And the time is 1.2 seconds:
1208
1209 @sp 1
1210
1211 @table @strong
1212
1213 @item g
1214 9.81
1215
1216 @item t
1217 1.2
1218
1219 @end table
1220
1221 @sp 1
1222
1223 The two elements Mobile with circular movement at top represents the initial state of the system. Taking the left as the sphere of 900 grams, which we call @emph{Ainitial}, and the right as the sphere of 350 grams, which we call @emph{Binitial}, we have respectively:
1224
1225 @sp 1
1226
1227 @table @strong
1228
1229 @item Name
1230 Ainitial
1231
1232 @item m
1233 900 @@ g
1234
1235 @item vt
1236 0
1237
1238 @item r
1239 17.5 @@ cm
1240
1241 @item y
1242 0
1243
1244 @end table
1245
1246 @sp 2
1247
1248 @table @strong
1249
1250 @item Name
1251 Binitial
1252
1253 @item m
1254 350 @@ g
1255
1256 @item vt
1257 0
1258
1259 @item r
1260 45 @@ cm
1261
1262 @item y
1263 0
1264
1265 @end table
1266
1267 @sp 1
1268
1269 Now we add these to the Initial system element, which we call @emph{initial}:
1270
1271 @sp 1
1272
1273 @table @strong
1274
1275 @item Name
1276 initial
1277
1278 @item Object 1
1279 Ainitial
1280
1281 @item Object 2
1282 Binitial
1283
1284 @item Object 3
1285 0
1286
1287 @item Object 4
1288 0
1289
1290 @end table
1291
1292 @sp 1
1293
1294 The two elements Mobile with circular movement on the bottom represents the final state. Calling @emph{Afinal} the sphere of 900 grams and @emph{Bfinal} the sphere of 350 grams, we have:
1295
1296 @sp 1
1297
1298 @table @strong
1299
1300 @item Name
1301 Afinal
1302
1303 @item m
1304 900 @@ g
1305
1306 @item vt
1307 vtAfinal
1308
1309 @item r
1310 17.5 @@ cm
1311
1312 @item y
1313 0
1314
1315 @end table
1316
1317 @sp 2
1318
1319 @table @strong
1320
1321 @item Name
1322 Bfinal
1323
1324 @item m
1325 350 @@ g
1326
1327 @item vt
1328 vtBfinal
1329
1330 @item r
1331 45 @@ cm
1332
1333 @item y
1334 0
1335
1336 @end table
1337
1338 @sp 1
1339
1340 Now we add these to the Final system element, which we call @emph{final}:
1341
1342 @sp 1
1343
1344 @table @strong
1345
1346 @item Name
1347 final
1348
1349 @item Object 1
1350 Afinal
1351
1352 @item Object 2
1353 Bfinal
1354
1355 @item Object 3
1356 0
1357
1358 @item Object 4
1359 0
1360
1361 @end table
1362
1363 @sp 1
1364
1365 Now add the two systems to element Angular momentum, where we put also the applied momentum:
1366
1367 @sp 1
1368
1369 @table @strong
1370
1371 @item System i
1372 initial
1373
1374 @item System f
1375 final
1376
1377 @item M
1378 5
1379
1380 @end table
1381
1382 @sp 1
1383
1384 Also add these to the Power element, where we put the power as an unknown:
1385
1386 @sp 1
1387
1388 @table @strong
1389
1390 @item System i
1391 initial
1392
1393 @item System f
1394 final
1395
1396 @item P
1397 power
1398
1399 @end table
1400
1401 @sp 1
1402
1403 Now in Angular velocity elements, put the final angular velocity as an unknown (the same for both spheres):
1404
1405 @sp 1
1406
1407 @table @strong
1408
1409 @item Object
1410 Afinal
1411
1412 @item vang
1413 vang
1414
1415 @end table
1416
1417 @sp 2
1418
1419 @table @strong
1420
1421 @item Object
1422 Bfinal
1423
1424 @item vang
1425 vang
1426
1427 @end table
1428
1429 @sp 1
1430
1431 We use the element Mobile with perpendicular circular movement to know the angular acceleration, applying the force produced by the applied moment. But since the system have two spheres with different mass and different radius, first we get the total mass and the effective turning radius of the final system, using the Inertia element:
1432
1433 @sp 1
1434
1435 @table @strong
1436
1437 @item System
1438 final
1439
1440 @item m
1441 mTotal
1442
1443 @item r
1444 radius
1445
1446 @end table
1447
1448 @sp 1
1449
1450 Now we can obtain the corresponding force for this system using the element Moment of a force:
1451
1452 @sp 1
1453
1454 @table @strong
1455
1456 @item M
1457 5
1458
1459 @item f
1460 Ft
1461
1462 @item d
1463 radius
1464
1465 @end table
1466
1467 @sp 1
1468
1469 Now enter these information in the element Mobile with perpendicular circular movement, which we call @emph{system}. As tangential velocity for this system we will place 0, the initial velocity (Since the angular acceleration is constant, has the same value at initial or final state. Anyway, we don't know the final velocity of this mobile.):
1470
1471 @sp 1
1472
1473 @table @strong
1474
1475 @item Name
1476 system
1477
1478 @item m
1479 mTotal
1480
1481 @item vt
1482 0
1483
1484 @item r
1485 radius
1486
1487 @item at
1488 at
1489
1490 @item Ft
1491 Ft
1492
1493 @item C
1494 >
1495
1496 @end table
1497
1498 @sp 1
1499
1500 And to the applied forces:
1501
1502 @sp 1
1503
1504 @table @strong
1505
1506 @item f
1507 normal
1508
1509 @end table
1510
1511 @sp 2
1512
1513 @table @strong
1514
1515 @item f
1516 centripetal
1517
1518 @end table
1519
1520 @sp 1
1521
1522 Finally in the Angular acceleration element, we assign the Mobile with perpendicular circular movement:
1523
1524 @sp 1
1525
1526 @table @strong
1527
1528 @item Object
1529 system
1530
1531 @item aang
1532 aang
1533
1534 @end table
1535
1536 @sp 1
1537
1538 Now click in the icon Solve to get the answer:
1539
1540 @example
1541
1542 normal = 12.263 N ; centripetal = -0.000 N ;
1543 mTotal = 1.250 kg ; radius = 0.281 m ;
1544 Ft = 17.817 N ; aang = 50.794 rad/s2 ;
1545 vtAfinal = 10.667 m/s ; vtBfinal = 27.429 m/s ;
1546 vang = 60.952 rad/s ; power = 152.381 N*m/s ;
1547 at = 14.254 m/s2 ;
1548 Status = success.
1549
1550 @end example
1551
1552 @page
1553
1554
1555 @node Example 7 (cd), Example 8 (cd), Example 6 (cd), Examples circular dynamics
1556 @section Example 7
1557
1558 @cindex Example 7 (cd)
1559
1560 Two small spheres of 300 grams can slide without friction along a horizontal thin bar, which in turn can rotate about a vertical axis. Initially the bar is rotating at a constant angular speed of 9 rad/s, while a rope holds both spheres at a distance of 15 cm from the axis of rotation. Suddenly the rope breaks and the spheres stops at the ends of the bar. Find the final angular velocity and the loss energy. Also find the centripetal force and centripetal acceleration of the spheres at the beginning and end.
1561
1562 @center @image{dc-e7-1, 6cm}
1563
1564 @sp 2
1565
1566 @strong{Solution with FisicaLab}
1567
1568 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, four elements Mobile with circular movement, two elements Force, one element Initial system, one element Final system, one element Energy, one element Angular momentum, two elements Angular velocity and two elements Angular acceleration. As show the image below:
1569
1570 @center @image{dc-e7-2, 8cm}
1571
1572 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. Now the two elements Mobile with circular movement at top represents the initial state of the system. Calling them @emph{Ainitial} and @emph{Binitial}, we have:
1573
1574 @sp 1
1575
1576 @table @strong
1577
1578 @item Name
1579 Ainitial
1580
1581 @item m
1582 300 @@ g
1583
1584 @item vt
1585 vtInitial
1586
1587 @item r
1588 15 @@ cm
1589
1590 @item y
1591 0
1592
1593 @end table
1594
1595 @sp 2
1596
1597 @table @strong
1598
1599 @item Name
1600 Binitial
1601
1602 @item m
1603 300 @@ g
1604
1605 @item vt
1606 vtInitial
1607
1608 @item r
1609 15 @@ cm
1610
1611 @item y
1612 0
1613
1614 @end table
1615
1616 @sp 1
1617
1618 Both have the same tangential speed at the beginning, which is unknown. Now with one of the elements Angular velocity, we set the initial angular velocity. You only need to do this for one of the spheres:
1619
1620 @sp 1
1621
1622 @table @strong
1623
1624 @item Object
1625 Ainitial
1626
1627 @item vang
1628 9
1629
1630 @end table
1631
1632 @sp 1
1633
1634 For the element Force applied to one of these spheres, that represents the centripetal force, we have:
1635
1636 @sp 1
1637
1638 @table @strong
1639
1640 @item f
1641 centInitial
1642
1643 @end table
1644
1645 @sp 1
1646
1647 We only add one force because both spheres have the same centripetal force. Now for one of the Centripetal acceleration elements:
1648
1649 @sp 1
1650
1651 @table @strong
1652
1653 @item Object
1654 Ainitial
1655
1656 @item ac
1657 acInitial
1658
1659 @end table
1660
1661 @sp 1
1662
1663 Now we add these spheres to the Initial system element, which we call @emph{initial}:
1664
1665 @sp 1
1666
1667 @table @strong
1668
1669 @item Name
1670 initial
1671
1672 @item Object 1
1673 Ainitial
1674
1675 @item Object 2
1676 Binitial
1677
1678 @item Object 3
1679 0
1680
1681 @item Object 4
1682 0
1683
1684 @end table
1685
1686 @sp 1
1687
1688 Now the two elements Mobile with circular movement at bottom represents the final state of the system. Calling them @emph{Afinal} and @emph{Bfinal}, we have:
1689
1690 @sp 1
1691
1692 @table @strong
1693
1694 @item Name
1695 Afinal
1696
1697 @item m
1698 300 @@ g
1699
1700 @item vt
1701 vtFinal
1702
1703 @item r
1704 43 @@ cm
1705
1706 @item y
1707 0
1708
1709 @end table
1710
1711 @sp 2
1712
1713 @table @strong
1714
1715 @item Name
1716 Bfinal
1717
1718 @item m
1719 300 @@ g
1720
1721 @item vt
1722 vtFinal
1723
1724 @item r
1725 43 @@ cm
1726
1727 @item y
1728 0
1729
1730 @end table
1731
1732 @sp 1
1733
1734 Both have the same tangential speed at final. For the applied force:
1735
1736 @sp 1
1737
1738 @table @strong
1739
1740 @item f
1741 centFinal
1742
1743 @end table
1744
1745 @sp 1
1746
1747 And to elements Angular velocity and Centripetal acceleration we have, respectively:
1748
1749 @sp 1
1750
1751 @table @strong
1752
1753 @item Object
1754 Afinal
1755
1756 @item vang
1757 vangFinal
1758
1759 @end table
1760
1761 @sp 2
1762
1763 @table @strong
1764
1765 @item Object
1766 Afinal
1767
1768 @item ac
1769 acFinal
1770
1771 @end table
1772
1773 @sp 1
1774
1775 Now we add these spheres to the Final system element, which we call @emph{final}:
1776
1777 @sp 1
1778
1779 @table @strong
1780
1781 @item Name
1782 final
1783
1784 @item Object 1
1785 Afinal
1786
1787 @item Object 2
1788 Bfinal
1789
1790 @item Object 3
1791 0
1792
1793 @item Object 4
1794 0
1795
1796 @end table
1797
1798 @sp 1
1799
1800 And add the elements initial and final system in the element Angular momentum, remember that there isn't an applied moment:
1801
1802 @sp 1
1803
1804 @table @strong
1805
1806 @item System i
1807 initial
1808
1809 @item System f
1810 final
1811
1812 @item M
1813 0
1814
1815 @end table
1816
1817 @sp 1
1818
1819 Also add the elements initial and final system in the element Energy:
1820
1821 @sp 1
1822
1823 @table @strong
1824
1825 @item System i
1826 initial
1827
1828 @item System f
1829 final
1830
1831 @item W
1832 energy
1833
1834 @end table
1835
1836 @sp 1
1837
1838 Now click in the icon Solve to get the answer:
1839
1840 @example
1841
1842 vangFinal = 1.095 rad/s ; acInitial = 12.150 m/s2 ;
1843 acFinal = 0.516 m/s2 ; vtInitial = 1.350 m/s ;
1844 vtFinal = 0.471 m/s ; centInitial = 3.645 N ;
1845 centFinal = 0.155 N ; energy = -0.480 N*m ;
1846 Status = success.
1847
1848 @end example
1849
1850 @page
1851
1852
1853 @node Example 8 (cd), Example 9 (cd), Example 7 (cd), Examples circular dynamics
1854 @section Example 8
1855
1856 @cindex Example 8 (cd)
1857
1858 A small disc of 500 grams and another of 1.5 kg are tied by a rope of 48 cm. Both disks rotate in the direction of clockwise with an angular velocity of 8 rad/s around the center of mass. At the time shown in the image, the center of mass intersects the X axis at 2 meters from the origin with an speed of 0.45 m/s at 55 degrees from the horizontal. Moments after the rope breaks, and it is observed that the disk of 1.5 kg is moved parallel to the axis X and the disk of 500 grams intersects the Y axis at a distance of 4.6 m from the origin. Find a) The speed of both discs after the rope breaks and b) the distance d between the X axis and the trajectory of the disk of 1.5 kg.
1859
1860 @center @image{dc-e8-1, 7cm}
1861
1862 @sp 2
1863
1864 @strong{Solution with FisicaLab}
1865
1866 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add two elements Mobile with circular movement, two elements Mobile with linear movement, one element Center of rotation, one element Initial system, one element Final system, two elements Angular velocity, one element Energy, one element Angular momentum and one element Linear momentum. As show the image below:
1867
1868 @center @image{dc-e8-2, 6cm}
1869
1870 The two elements Mobile with circular movement at left represent the initial state of the system. Taking the left as the disk of 500 grams, which we call @emph{Ainitial}, and the right as the disk of 1.5 kg, which we call @emph{Binitial}, we have respectively (the distance from each disk to the center of rotation can be obtained using the @code{rd()} function and applying the conversion factor):
1871
1872 @sp 1
1873
1874 @table @strong
1875
1876 @item Name
1877 Ainitial
1878
1879 @item m
1880 500 @@ g
1881
1882 @item vt
1883 vtA
1884
1885 @item r
1886 36 @@ cm
1887
1888 @item y
1889 0
1890
1891 @end table
1892
1893 @sp 2
1894
1895 @table @strong
1896
1897 @item Name
1898 Binitial
1899
1900 @item m
1901 1.5
1902
1903 @item vt
1904 vtB
1905
1906 @item r
1907 12 @@ cm
1908
1909 @item y
1910 0
1911
1912 @end table
1913
1914 @sp 1
1915
1916 The tangential velocity is unknown. But we know the angular velocity. Therefore to Angular velocity elements, remember that rotation is in sense of clockwise:
1917
1918 @sp 1
1919
1920 @table @strong
1921
1922 @item Object
1923 Ainitial
1924
1925 @item vang
1926 -8
1927
1928 @end table
1929
1930 @sp 2
1931
1932 @table @strong
1933
1934 @item Object
1935 Binitial
1936
1937 @item vang
1938 -8
1939
1940 @end table
1941
1942 @sp 1
1943
1944 Now for the element Center of rotation, which also forms part of the initial state:
1945
1946 @sp 1
1947
1948 @table @strong
1949
1950 @item Name
1951 center
1952
1953 @item v
1954 0.45
1955
1956 @item ang
1957 55
1958
1959 @item x
1960 2
1961
1962 @item y
1963 0
1964
1965 @end table
1966
1967 @sp 1
1968
1969 As the two elements Mobile with circular movement and Center of rotation are the initial state, we add them to the element Initial system, which we call @emph{initial}:
1970
1971 @sp 1
1972
1973 @table @strong
1974
1975 @item Name
1976 initial
1977
1978 @item Object 1
1979 centtr
1980
1981 @item Object 2
1982 Ainitial
1983
1984 @item Object 3
1985 Binitial
1986
1987 @item Object 4
1988 0
1989
1990 @end table
1991
1992 @sp 1
1993
1994 Now for the element Mobile with linear movement at top, that represent the disk of 500 grams that intersect the axis Y, we have, calling it @emph{Afinal}:
1995
1996 @sp 1
1997
1998 @table @strong
1999
2000 @item Name
2001 Afinal
2002
2003 @item m
2004 500 @@ g
2005
2006 @item v
2007 vAfinal
2008
2009 @item x
2010 0
2011
2012 @item y
2013 4.6
2014
2015 @item ang
2016 angA
2017
2018 @item a
2019 0
2020
2021 @end table
2022
2023 @sp 1
2024
2025 For the other element Mobile with linear movement at bottom, which represents the disk of 1.5 kg which travels parallel to the X axis at a distance d, and calling it @emph{Bfinal}:
2026
2027 @sp 1
2028
2029 @table @strong
2030
2031 @item Name
2032 Bfinal
2033
2034 @item m
2035 1.5
2036
2037 @item v
2038 vBfinal
2039
2040 @item x
2041 0
2042
2043 @item y
2044 d
2045
2046 @item ang
2047 0
2048
2049 @item a
2050 0
2051
2052 @end table
2053
2054 @sp 1
2055
2056 These two elements form the final state, then we add them to the element Final system, which we call @emph{final}:
2057
2058 @sp 1
2059
2060 @table @strong
2061
2062 @item Name
2063 final
2064
2065 @item Object 1
2066 Afinal
2067
2068 @item Object 2
2069 Bfinal
2070
2071 @item Object 3
2072 0
2073
2074 @item Object 4
2075 0
2076
2077 @end table
2078
2079 @sp 1
2080
2081 Now for the element Energy, knowing that energy is conserved, we have:
2082
2083 @sp 1
2084
2085 @table @strong
2086
2087 @item System i
2088 initial
2089
2090 @item System f
2091 final
2092
2093 @item W
2094 0
2095
2096 @end table
2097
2098 @sp 1
2099
2100 To the element Angular momentum, taking into account that no external moments applied:
2101
2102 @sp 1
2103
2104 @table @strong
2105
2106 @item System i
2107 initial
2108
2109 @item System f
2110 final
2111
2112 @item M
2113 0
2114
2115 @end table
2116
2117 @sp 1
2118
2119 And to element Linear momentum, no external forces are applied, we have:
2120
2121 @sp 1
2122
2123 @table @strong
2124
2125 @item System i
2126 initial
2127
2128 @item System f
2129 final
2130
2131 @item Fx
2132 0
2133
2134 @item Fy
2135 0
2136
2137 @end table
2138
2139 @sp 1
2140
2141 Now click in the icon Solve to get the answer:
2142
2143 @example
2144
2145 vBfinal = 1.145 m/s ; d = 2.761 m ; vtA = -2.880 m/s ;
2146 vtB = -0.960 m/s ; vAfinal = 2.818 m/s ;
2147 angA = 148.447 degrees ;
2148 Status = success.
2149
2150 @end example
2151
2152 @page
2153
2154
2155 @node Example 9 (cd), Example 10 (cd), Example 8 (cd), Examples circular dynamics
2156 @section Example 9
2157
2158 @cindex Example 9 (cd)
2159
2160 A child of 30 kg is playing on an ice rink. The child moves at a linear speed of 5 m/s when passing beside a box of 9 kg, which has a rope tied. If the child takes the rope, and once stretched the separation between the child and the box is 6.5 meters, describe the subsequent move of child-box system.
2161
2162 @center @image{dc-e9-1, 7cm}
2163
2164 @sp 2
2165
2166 @strong{Solution with FisicaLab}
2167
2168 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Mobile with linear movement, two elements Mobile with circular movement, one element Center of rotation, one element Final system, two elements Angular velocity, one element Angular momentum and one element Linear momentum. As show the image below:
2169
2170 @center @image{dc-e9-2, 5cm}
2171
2172 The element Mobile with linear movement represents the child in the initial state. Assuming initially that moves along the X axis, we have:
2173
2174 @sp 1
2175
2176 @table @strong
2177
2178 @item Name
2179 initialChild
2180
2181 @item m
2182 30
2183
2184 @item v
2185 5
2186
2187 @item x
2188 0
2189
2190 @item y
2191 0
2192
2193 @item ang
2194 0
2195
2196 @item a
2197 0
2198
2199 @end table
2200
2201 @sp 1
2202
2203 Now the element Center of rotation represents the center around which the child and the box tour at the final state. Noting that the angle of inclination of the rope, once taut, with respect to the horizontal is 27.486 degrees, and the distance from the center of rotation to child is 1.5 meters, we can obtain the coordinates of the center of rotation as (these operations can be done directly at text fields):
2204
2205 @example
2206
2207 x = 1.5*cos(27.486) = 1.331
2208 y = 1.5*sin(27.486) = 0.692
2209
2210 @end example
2211
2212 Thus we have for this element:
2213
2214 @sp 1
2215
2216 @table @strong
2217
2218 @item Name
2219 center
2220
2221 @item v
2222 vCenter
2223
2224 @item ang
2225 angCenter
2226
2227 @item x
2228 1.331
2229
2230 @item y
2231 0.692
2232
2233 @end table
2234
2235 @sp 1
2236
2237 Now the element Mobile with circular movement at top, represents the box, and calculating the distance from this to the center of rotation (5 m, the function @code{rd()} can be used to get this value), we have:
2238
2239 @sp 1
2240
2241 @table @strong
2242
2243 @item Name
2244 finalBox
2245
2246 @item m
2247 9
2248
2249 @item vt
2250 vtBox
2251
2252 @item r
2253 5
2254
2255 @item y
2256 0
2257
2258 @end table
2259
2260 @sp 1
2261
2262 The other element Mobile with circular movement to the lower right side, represents the child in the final state, and calculating the distance of the center of rotation (1.5 m, the function @code{rd()} can be used to get this value), we have:
2263
2264 @sp 1
2265
2266 @table @strong
2267
2268 @item Name
2269 finalBoy
2270
2271 @item m
2272 30
2273
2274 @item vt
2275 vtBoy
2276
2277 @item r
2278 1.5
2279
2280 @item y
2281 0
2282
2283 @end table
2284
2285 @sp 1
2286
2287 The box and the child have the same angular velocity. Therefore for the Angular velocity elements, respectively:
2288
2289 @sp 1
2290
2291 @table @strong
2292
2293 @item Object
2294 finalBoy
2295
2296 @item vang
2297 vang
2298
2299 @end table
2300
2301 @sp 2
2302
2303 @table @strong
2304
2305 @item Object
2306 finalBox
2307
2308 @item vang
2309 vang
2310
2311 @end table
2312
2313 @sp 1
2314
2315 The element Center of rotation and the two elements Mobile with circular movement are the final state. Then we add them to the element Final system, which we call @emph{final}:
2316
2317 @sp 1
2318
2319 @table @strong
2320
2321 @item Name
2322 final
2323
2324 @item Object 1
2325 center
2326
2327 @item Object 2
2328 finalBoy
2329
2330 @item Object 3
2331 finalBox
2332
2333 @item Object 4
2334 0
2335
2336 @end table
2337
2338 @sp 1
2339
2340 To the element Angular momentum, taking into account that no external moments applied:
2341
2342 @sp 1
2343
2344 @table @strong
2345
2346 @item System i
2347 initialBoy
2348
2349 @item System f
2350 final
2351
2352 @item M
2353 0
2354
2355 @end table
2356
2357 @sp 1
2358
2359 And to element Linear momentum, no external forces are applied, we have:
2360
2361 @sp 1
2362
2363 @table @strong
2364
2365 @item System i
2366 initialBoy
2367
2368 @item System f
2369 final
2370
2371 @item Fx
2372 0
2373
2374 @item Fy
2375 0
2376
2377 @end table
2378
2379 @sp 1
2380
2381 Now click in the icon Solve to get the answer:
2382
2383 @example
2384
2385 vang = 0.355 rad/s ; vCenter = 3.846 m/s ;
2386 angCenter = 360.000 degrees ; vtBox = 1.774 m/s ;
2387 vtBoy = 0.532 m/s ;
2388 Status = success.
2389
2390 @end example
2391
2392 The center of rotation moves horizontally to the right with a speed of 3.846 m/s. And the boy and the box rotate in a counter-clockwise with an angular velocity of 0.355 rad/s.
2393
2394 @strong{Note:} @emph{Note that in this problem the mass of 9 kg does not appear in the initial state. This is because for these problems FisicaLab allows only one object in the initial state. The object that initially is moving.}
2395
2396 @page
2397
2398
2399 @node Example 10 (cd), Example 11 (cd), Example 9 (cd), Examples circular dynamics
2400 @section Example 10
2401
2402 @cindex Example 10 (cd)
2403
2404 Three masses are on an horizontal frictionless surface. Two of these, 3 and 6 kg, are at rest and are linked by a lightweight rod. The third, of 1 kg, moves with a speed of 4 m/s as shown in the image. If this collide with mass of 3 kg and bounces at 90 degrees with a speed of 2 m/s. What will be the subsequent movement of the other two masses? Also obtain the absolute velocity of the masses of 3 and 6 kg just after impact.
2405
2406 @center @image{dc-e10-1, 6cm}
2407
2408 @sp 2
2409
2410 @strong{Solution with FisicaLab}
2411
2412 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add two elements Mobile with linear movement, two elements Mobile with circular movement, one element Center of rotation, one element Final system, two elements Angular velocity, two elements Absolute velocity, one element Angular momentum and one element Linear momentum. As show the image below:
2413
2414 @center @image{dc-e10-2, 6cm}
2415
2416 The element Mobile with linear movement to the left represents the mass of 1 kg in the initial state. Assuming the mass of 6 kg is at the origin of the coordinate system, we have for this element, called @emph{initial}:
2417
2418 @sp 1
2419
2420 @table @strong
2421
2422 @item Name
2423 initial
2424
2425 @item m
2426 1
2427
2428 @item v
2429 4
2430
2431 @item x
2432 0
2433
2434 @item y
2435 20 @@ cm
2436
2437 @item ang
2438 0
2439
2440 @item a
2441 0
2442
2443 @end table
2444
2445 @sp 1
2446
2447 To the other Mobile with linear movement, which represents the same mass of 1 kg but in the final state, we have, calling it @emph{A} (the X coordinate is @code{40*cos(30)}, this can be operated directly at text field):
2448
2449 @sp 1
2450
2451 @table @strong
2452
2453 @item Name
2454 A
2455
2456 @item m
2457 1
2458
2459 @item v
2460 2
2461
2462 @item x
2463 34.641 @@ cm
2464
2465 @item y
2466 0
2467
2468 @item ang
2469 90
2470
2471 @item a
2472 0
2473
2474 @end table
2475
2476 @sp 1
2477
2478 To the element Center of rotation, around which the masses of 3 and 6 kg rotate in the final state, we first find its coordinates. Noting that the distance from the mass of 6 kg is 13,333 m, we have (these operations can be done directly at text fields):
2479
2480 @example
2481
2482 x = 13.333*cos(30) = 11.547
2483 y = 13.333*sin(30) = 6.666
2484
2485 @end example
2486
2487 Thus we have for this element:
2488
2489 @sp 1
2490
2491 @table @strong
2492
2493 @item Name
2494 center
2495
2496 @item v
2497 vCenter
2498
2499 @item ang
2500 angCenter
2501
2502 @item x
2503 11.547 @@ cm
2504
2505 @item y
2506 6.666 @@ cm
2507
2508 @end table
2509
2510 @sp 1
2511
2512 Now for the element Mobile with circular movement to the right, that represents the mass of 3 kg in the final state, we have, calling it @emph{B} (the distance from the center can be calculated with the function @code{rd()}):
2513
2514 @sp 1
2515
2516 @table @strong
2517
2518 @item Name
2519 B
2520
2521 @item m
2522 3
2523
2524 @item vt
2525 vtB
2526
2527 @item r
2528 26.666 @@ cm
2529
2530 @item y
2531 0
2532
2533 @end table
2534
2535 @sp 1
2536
2537 To the other element Mobile with circular movement, that represents the mass of 6 kg in the final state, we have, calling it @emph{C} (the distance from the center can be calculated with the function @code{rd()}):
2538
2539 @sp 1
2540
2541 @table @strong
2542
2543 @item Name
2544 C
2545
2546 @item m
2547 6
2548
2549 @item vt
2550 vtC
2551
2552 @item r
2553 13.333 @@ cm
2554
2555 @item y
2556 0
2557
2558 @end table
2559
2560 @sp 1
2561
2562 These two elements have the same angular velocity. Therefore for the Angular velocity elements, respectively:
2563
2564 @sp 1
2565
2566 @table @strong
2567
2568 @item Object
2569 B
2570
2571 @item vang
2572 vang
2573
2574 @end table
2575
2576 @sp 2
2577
2578 @table @strong
2579
2580 @item Object
2581 C
2582
2583 @item vang
2584 vang
2585
2586 @end table
2587
2588 @sp 1
2589
2590 These three mobiles and the center of rotation constitute the final state, then we add them to the element Final system, that we call @emph{final}:
2591
2592 @sp 1
2593
2594 @table @strong
2595
2596 @item Name
2597 final
2598
2599 @item Object 1
2600 center
2601
2602 @item Object 2
2603 A
2604
2605 @item Object 3
2606 B
2607
2608 @item Object 4
2609 C
2610
2611 @end table
2612
2613 @sp 1
2614
2615 Since are requested the absolute velocity of masses 3 and 6 kg (B and C), we have for the elements Absolute velocity, respectively:
2616
2617 @sp 1
2618
2619 @table @strong
2620
2621 @item Object
2622 B
2623
2624 @item angR
2625 30
2626
2627 @item Center
2628 center
2629
2630 @item v
2631 vB
2632
2633 @item ang
2634 angB
2635
2636 @end table
2637
2638 @sp 2
2639
2640 @table @strong
2641
2642 @item Object
2643 C
2644
2645 @item angR
2646 210
2647
2648 @item Center
2649 center
2650
2651 @item v
2652 vC
2653
2654 @item ang
2655 angC
2656
2657 @end table
2658
2659 @sp 1
2660
2661 To the element Angular momentum, taking into account that no external moments applied:
2662
2663 @sp 1
2664
2665 @table @strong
2666
2667 @item System i
2668 initial
2669
2670 @item System f
2671 final
2672
2673 @item M
2674 0
2675
2676 @end table
2677
2678 @sp 1
2679
2680 And to element Linear momentum, no external forces are applied, we have:
2681
2682 @sp 1
2683
2684 @table @strong
2685
2686 @item System i
2687 initial
2688
2689 @item System f
2690 final
2691
2692 @item Fx
2693 0
2694
2695 @item Fy
2696 0
2697
2698 @end table
2699
2700 @sp 1
2701
2702 Now click in the icon Solve to get the answer:
2703
2704 @example
2705
2706 vang = -3.110 rad/s ; vtC = -0.415 m/s ;
2707 vB = 1.274 m/s ; angB = 312.412 degrees ;
2708 vtB = -0.829 m/s ; vC = 0.274 m/s ;
2709 angC = 30.004 degrees ; vCenter = 0.497 m/s ;
2710 angCenter = 333.435 degrees ;
2711 Status = success.
2712
2713 @end example
2714
2715 @strong{Note:} @emph{Note that in this problem the masses of 3 and 6 kg does not appear in the initial state. This is because for these problems FisicaLab allows only one object in the initial state. The object that initially is moving. See previous example.}
2716
2717 @page
2718
2719
2720 @node Example 11 (cd), Example 12 (cd), Example 10 (cd), Examples circular dynamics
2721 @section Example 11
2722
2723 @cindex Example 11 (cd)
2724
2725 A mass of 0.1 slugs is released from rest in A and slides without friction along the track shown. If the radius of curvature of the bottom is 3 ft, find the force applied by the track to the mass when it passes through the point B.
2726
2727 @center @image{dc-e11-1, 5cm}
2728
2729 @sp 2
2730
2731 @strong{Solution with FisicaLab}
2732
2733 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the English system. And add one element Stationary reference system, one element Object in rest, one element Mobile with circular movement, one element Force and one element Energy. As show the image below:
2734
2735 @center @image{dc-e11-2, 5cm}
2736
2737 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. Now the element Object in rest represents the mass at point A. If we take as horizontal reference the position B, the Y coordinate of the mass shall be: @code{5 ft + 3*sin(30) ft = 6.5 ft} (this can be operated directly at text field). Then we have for this element:
2738
2739 @sp 1
2740
2741 @table @strong
2742
2743 @item Name
2744 A
2745
2746 @item m
2747 0.1
2748
2749 @item y
2750 6.5
2751
2752 @end table
2753
2754 @sp 1
2755
2756 Now to the element Mobile with circular movement, which represents the mass at point B, we have (the tangential velocity is unknown):
2757
2758 @sp 1
2759
2760 @table @strong
2761
2762 @item Name
2763 B
2764
2765 @item m
2766 0.1
2767
2768 @item vt
2769 vt
2770
2771 @item r
2772 3
2773
2774 @item y
2775 0
2776
2777 @end table
2778
2779 @sp 1
2780
2781 And to the element Force, which represents the normal force applied by the track:
2782
2783 @sp 1
2784
2785 @table @strong
2786
2787 @item f
2788 normal
2789
2790 @item ang
2791 30
2792
2793 @end table
2794
2795 @sp 1
2796
2797 Now add the elements initial and final system in the element Energy. And knowing that energy is conserved, we have:
2798
2799 @sp 1
2800
2801 @table @strong
2802
2803 @item System i
2804 A
2805
2806 @item System f
2807 B
2808
2809 @item W
2810 0
2811
2812 @end table
2813
2814 @sp 1
2815
2816 Now click in the icon Solve to get the answer:
2817
2818 @example
2819
2820 normal = 15.563 lb ; vt = 20.460 ft/s ;
2821 Status = success.
2822
2823 @end example
2824
2825 @page
2826
2827
2828 @node Example 12 (cd), Example 13 (cd), Example 11 (cd), Examples circular dynamics
2829 @section Example 12
2830
2831 @cindex Example 12 (cd)
2832
2833 A mass of 3 kg traveling at 32 m/s, as shown in the figure below, explodes separating into two fragments. If these pass through the coordinates shown and the 1.8 kg fragment has the shown direction, find the speed of both fragments, as well as the direction of the fragment of 1.2 kg.
2834
2835 @center @image{dc-e12-1, 8cm}
2836
2837 @sp 2
2838
2839 @strong{Solution with FisicaLab}
2840
2841 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add three elements Mobile with linear movement, one element Final system, one element Angular momentum and one element Linear momentum. As show the image below:
2842
2843 @center @image{dc-e12-2, 6cm}
2844
2845 To the element Mobile with linear movement to the left, that represents the mass of 3 kg in the initial state, we have, calling it @emph{A}:
2846
2847 @sp 1
2848
2849 @table @strong
2850
2851 @item Name
2852 A
2853
2854 @item m
2855 3
2856
2857 @item v
2858 32
2859
2860 @item x
2861 0
2862
2863 @item y
2864 4
2865
2866 @item ang
2867 0
2868
2869 @item a
2870 0
2871
2872 @end table
2873
2874 @sp 1
2875
2876 Now for the element Mobile with linear movement at top, that represents the fragment of 1.8 kg, we have, calling it @emph{B}:
2877
2878 @sp 1
2879
2880 @table @strong
2881
2882 @item Name
2883 B
2884
2885 @item m
2886 1.8
2887
2888 @item v
2889 vB
2890
2891 @item x
2892 8
2893
2894 @item y
2895 6.5
2896
2897 @item ang
2898 38
2899
2900 @item a
2901 0
2902
2903 @end table
2904
2905 @sp 1
2906
2907 And to the element Mobile with linear movement at bottom, that represents the fragment of 1.2 kg, we have, calling it @emph{C}:
2908
2909 @sp 1
2910
2911 @table @strong
2912
2913 @item Name
2914 C
2915
2916 @item m
2917 1.2
2918
2919 @item v
2920 vC
2921
2922 @item x
2923 7.5
2924
2925 @item y
2926 0
2927
2928 @item ang
2929 angC
2930
2931 @item a
2932 0
2933
2934 @end table
2935
2936 @sp 1
2937
2938 The fragments B and C are the final state, so we add them to the element Final system, which we call @emph{final}:
2939
2940 @sp 1
2941
2942 @table @strong
2943
2944 @item Name
2945 final
2946
2947 @item Object 1
2948 B
2949
2950 @item Object 2
2951 C
2952
2953 @item Object 3
2954 0
2955
2956 @item Object 4
2957 0
2958
2959 @end table
2960
2961 @sp 1
2962
2963 Now to the element Angular momentum, taking into account that no external moments applied:
2964
2965 @sp 1
2966
2967 @table @strong
2968
2969 @item System i
2970 A
2971
2972 @item System f
2973 final
2974
2975 @item M
2976 0
2977
2978 @end table
2979
2980 @sp 1
2981
2982 And to element Linear momentum, no external forces are applied, we have:
2983
2984 @sp 1
2985
2986 @table @strong
2987
2988 @item System i
2989 A
2990
2991 @item System f
2992 final
2993
2994 @item Fx
2995 0
2996
2997 @item Fy
2998 0
2999
3000 @end table
3001
3002 @sp 1
3003
3004 Now click in the icon Solve to get the answer:
3005
3006 @example
3007
3008 vB = 44.313 m/s ; vC = 49.372 m/s ;
3009 angC = 304.018 degrees ;
3010 Status = success.
3011
3012 @end example
3013
3014 @page
3015
3016
3017 @node Example 13 (cd), , Example 12 (cd), Examples circular dynamics
3018 @section Example 13
3019
3020 @cindex Example 13 (cd)
3021
3022 A small sphere of ​​400 grams, tied to a rope of 60 cm, can oscillate in a vertical plane. If the sphere is released from rest when the rope is stretched horizontally. And if the maximum tension that this support is 7 N, find the angle when the rope breaks.
3023
3024 @center @image{dc-e13-1, 5cm}
3025
3026 @sp 2
3027
3028 @strong{Solution with FisicaLab}
3029
3030 Select the Dynamics group and, inside this, the Circular module. Erase the content of the chalkboard and select the SI system. And add one element Stationary reference system, one element Object in rest, one element Mobile with circular movement, one element Force, one element Energy and one element Sine of angle. As show the image below:
3031
3032 @center @image{dc-e13-2, 5cm}
3033
3034 The element Stationary reference system write to default the gravity value. And the time is irrelevant for this problem. Now the element Object in rest represents the initial state. If we take as horizontal reference this position, we have for this element:
3035
3036 @sp 1
3037
3038 @table @strong
3039
3040 @item Name
3041 A
3042
3043 @item m
3044 400 @@ g
3045
3046 @item y
3047 0
3048
3049 @end table
3050
3051 @sp 1
3052
3053 To the element Mobile with circular movement, which represents the final state, and taking into account that both the speed and height are unknowns, we have:
3054
3055 @sp 1
3056
3057 @table @strong
3058
3059 @item Name
3060 B
3061
3062 @item m
3063 400 @@ g
3064
3065 @item vt
3066 vt
3067
3068 @item r
3069 60 @@ cm
3070
3071 @item y
3072 yB
3073
3074 @end table
3075
3076 @sp 1
3077
3078 And to the Force element, which represents the force applied by the rope and taking into account that the angle of the force is the same as that of the rope, we have:
3079
3080 @sp 1
3081
3082 @table @strong
3083
3084 @item f
3085 7
3086
3087 @item ang
3088 ang
3089
3090 @end table
3091
3092 @sp 1
3093
3094 Now for the Sine of angle element, where we relate the height of the sphere in the final state and the turning radius with the unknown angle, we have:
3095
3096 @sp 1
3097
3098 @table @strong
3099
3100 @item y
3101 yB
3102
3103 @item r
3104 60 @@ cm
3105
3106 @item ang
3107 ang
3108
3109 @end table
3110
3111 @sp 1
3112
3113 Finally for the element Energy, and knowing that energy is conserved, we have:
3114
3115 @sp 1
3116
3117 @table @strong
3118
3119 @item System i
3120 A
3121
3122 @item System f
3123 B
3124
3125 @item W
3126 0
3127
3128 @end table
3129
3130 @sp 1
3131
3132 Now click in the icon Solve to get the answer:
3133
3134 @example
3135
3136 yB = -0.357 m ; ang = 36.486 degrees ; vt = 2.646 m/s ;
3137 Status = success.
3138
3139 @end example