Debian Codegraph @

Documentation/Manual/English/statics-examples.texinfo

raw
1 @c -*-texinfo-*-
2 @c This is part of the FisicaLab User Manual.
3 @c Copyright (C) 2013 German A. Arias.
4 @c See the file copying.texinfo for copying conditions.
5
6 @node Examples statics, Rigid statics, Statics, Top
7 @chapter Examples statics
8
9 @cindex Examples statics
10
11
12 @menu
13 * Example 1 (s)::
14 * Example 2 (s)::
15 * Example 3 (s)::
16 * Example 4 (s)::
17 * Example 5 (s)::
18 * Example 6 (s)::
19 * Example 7 (s)::
20 * Example 8 (s)::
21 * Example 9 (s)::
22 @end menu
23
24
25 @node Example 1 (s), Example 2 (s), Examples statics, Examples statics
26 @section Example 1
27
28 @cindex Example 1 (s)
29
30 Calculate the resultant of the three following forces:
31
32 @center @image{s-e1-1, 7cm}
33
34 @sp 2
35
36 @strong{Solution with FisicaLab}
37
38 Select the Static group and, inside this, the Particles module. Erase the content of the chalkboard and select the SI system. And add one element Point. Now, add two elements Oblique force, one element Horizontal force and one element Resultant. As show the image below:
39
40 @center @image{s-e1-2, 5cm}
41
42 To the element Point we have:
43
44 @sp 1
45
46 @table @strong
47
48 @item Name
49 Point
50
51 @end table
52
53 @sp 1
54
55 Remember that this name is irrelevant. To the element Horizontal force write:
56
57 @sp 1
58
59 @table @strong
60
61 @item f
62 50
63
64 @end table
65
66 @sp 1
67
68 To the element Oblique force that pointing upwards, that correspond to the force of 75 Newtons at 50 degrees, write:
69
70 @sp 1
71
72 @table @strong
73
74 @item f
75 75
76
77 @item ang
78 50
79
80 @end table
81
82 @sp 1
83
84 To the element Oblique force that pointing downwards, that correspond to the force of 35 Newtons at 35 degrees, write:
85
86 @sp 1
87
88 @table @strong
89
90 @item f
91 35
92
93 @item ang
94 35
95
96 @end table
97
98 @sp 1
99
100 And to the element Resultant, write:
101
102 @sp 1
103
104 @table @strong
105
106 @item f
107 r
108
109 @item ang
110 ang
111
112 @end table
113
114 @sp 1
115
116 Now click in the icon Solve to get the answer.
117
118 @example
119
120 r = 132.271 N ; ang = 16.415 degrees ;
121 Status = success.
122
123 @end example
124
125 @page
126
127
128 @node Example 2 (s), Example 3 (s), Example 1 (s), Examples statics
129 @section Example 2
130
131 @cindex Example 2 (s)
132
133 A block with a mass of 5 kg, is above a 30 degrees inclined plane. A string keep the block in rest (see image). If there isn't friction, which is the value of the stress in the string?.
134
135 @center @image{s-e2-1, 5cm}
136
137 @sp 2
138
139 @strong{Solution with FisicaLab}
140
141 Select the Static group and, inside this, the Particles module. Erase the content of the chalkboard and select the SI system. And add two elements Oblique force, one element Block above an inclined plane to the right and one element Stationary reference system, to make the free body diagram of the block. As show the image below:
142
143 @center @image{s-e2-2, 5cm}
144
145 To the Stationary reference system:
146
147 @sp 1
148
149 @table @strong
150
151 @item g
152 9.81
153
154 @end table
155
156 @sp 1
157
158 To the element Block above an inclined plane to the right write:
159
160 @sp 1
161
162 @table @strong
163
164 @item m
165 5
166
167 @item ang
168 30
169
170 @end table
171
172 @sp 1
173
174 To the element Oblique force, that correspond to the normal force, its angle is 60 degrees (if the plane is inclined 30 degrees, the normal force is inclined 60 degrees). Then write:
175
176 @sp 1
177
178 @table @strong
179
180 @item f
181 n
182
183 @item ang
184 60
185
186 @end table
187
188 @sp 1
189
190 To the Oblique force that correspond to the stress in the string, the angle is the 30 degrees (this force is parallel to the plane). Then write:
191
192 @sp 1
193
194 @table @strong
195
196 @item f
197 t
198
199 @item ang
200 30
201
202 @end table
203
204 @sp 1
205
206 Now click in the icon Solve to get the answer.
207
208 @example
209
210 t = 24.525 N ; n = 42.479 ;
211 Status = success.
212
213 @end example
214
215 @page
216
217
218 @node Example 3 (s), Example 4 (s), Example 2 (s), Examples statics
219 @section Example 3
220
221 @cindex Example 3 (s)
222
223 A block, with a mass of 3 kg, is maintained against the wall, to a horizontal force F. If the friction coefficient between the block and wall is 0.25, which is the minimal force F, to avoid the fallen of the block?
224
225 @center @image{s-e3-1, 3cm}
226
227 @sp 2
228
229 @strong{Solution with FisicaLab}
230
231 The minimal force F, correspond to the case when the friction force is maximum. With this in mind, erase the content of the chalkboard ans select the SI system, and add two elements Horizontal force, one element Friction, one element Block and one element Stationary reference system, to make the free body diagram of the block. As show the image below:
232
233 @center @image{s-e3-2, 4cm}
234
235 To the Stationary reference system:
236
237 @sp 1
238
239 @table @strong
240
241 @item g
242 9.81
243
244 @end table
245
246 @sp 1
247
248 To the element Block, write:
249
250 @sp 1
251
252 @table @strong
253
254 @item m
255 3
256
257 @end table
258
259 @sp 1
260
261 To the element Horizontal force that correspond to the force F, write:
262
263 @sp 1
264
265 @table @strong
266
267 @item f
268 F
269
270 @end table
271
272 Because is an unknown data. To the element Horizontal force that correspond to the normal force, write:
273
274 @table @strong
275
276 @item f
277 n
278
279 @end table
280
281 @sp 1
282
283 Is an unknown data too. Now, to the element Friction write:
284
285 @sp 1
286
287 @table @strong
288
289 @item Normal
290 n
291
292 @item u
293 0.25
294
295 @end table
296
297 @sp 1
298
299 Now click in the icon Solve to get the answer.
300
301 @example
302
303 F = 117.720 N ; n = 117.720 N ;
304 Status = success.
305
306 @end example
307
308 @page
309
310
311 @node Example 4 (s), Example 5 (s), Example 3 (s), Examples statics
312 @section Example 4
313
314 @cindex Example 4 (s)
315
316 At what angle will start to slide a block of 3.7 kg when the coefficient of friction is 0.39?
317
318 @sp 2
319
320 @strong{Solution with FisicaLab}
321
322 Erase the content of the chalkboard and select the SI system, and add one element Stationary reference system, one element Block above an inclined plane (to right or left), one element Force, one element Friction and one element Angles. And make the free body diagram as show the image below:
323
324 @center @image{s-e4, 6cm}
325
326 The element Stationary reference system write to default the gravity value. To the element Block above an inclined plane write the mass data. And the angle as an unknown:
327
328 @sp 1
329
330 @table @strong
331
332 @item m
333 3.7
334
335 @item ang
336 ang1
337
338 @end table
339
340 @sp 1
341
342 To the element Force, which represent the normal force, both entries are unknown:
343
344 @sp 1
345
346 @table @strong
347
348 @item f
349 normal
350
351 @item ang
352 ang2
353
354 @end table
355
356 @sp 1
357
358 And to the element Friction write the normal force and the given coefficient:
359
360 @sp 1
361
362 @table @strong
363
364 @item Normal
365 normal
366
367 @item u
368 0.39
369
370 @end table
371
372 @sp 1
373
374 And to the element Angles, add the two unknown angles that must be complementary:
375
376 @sp 1
377
378 @table @strong
379
380 @item ang1
381 ang1
382
383 @item ang2
384 ang2
385
386 @end table
387
388 @sp 1
389
390 Now click in the icon Solve to get the answer:
391
392 @example
393
394 ang1 = 21.306 degrees ; ang2 = 68.694 ;
395 normal = 33.816 N ;
396 Status = success.
397
398 @end example
399
400 @page
401
402
403 @node Example 5 (s), Example 6 (s), Example 4 (s), Examples statics
404 @section Example 5
405
406 @cindex Example 5 (s)
407
408 In the system shown in the image, if the stress in the string A is 2 Newtons. Which is the stress in the string B? Which is the mass block?
409
410 @sp 1
411
412 @center @image{s-e5-1, 6cm}
413
414 @sp 2
415
416 @strong{Solution with FisicaLab}
417
418 Borramos el contenido de la Pizarra, seleccionamos el sistema de unidades SI, y agregamos un elemento Sistema de referencia fijo, un elemento Punto, y un elemento Bloque. Al elemento Punto le agregamos tres elementos Fuerza, y al elemento Bloque solamente uno, para formar dos diagramas de cuerpo libre, tal y como se muestra en la siguiente imagen:
419
420 @center @image{s-e5-2, 4cm}
421
422 The element Stationary reference system write to default the gravity value. To the element Point the name is irrelevant. To the oblique force, that correspond to the stress in the string A, write:
423
424 @sp 1
425
426 @table @strong
427
428 @item f
429 2
430
431 @item ang
432 35
433
434 @end table
435
436 @sp 1
437
438 To the oblique force that correspond to the stress in the string B, write:
439
440 @sp 1
441
442 @table @strong
443
444 @item f
445 B
446
447 @item ang
448 22
449
450 @end table
451
452 @sp 1
453
454 Because the magnitude of the force is an unknown data. To the vertical force, applied to the Point, that correspond to the stress in the string that support the block, write:
455
456 @sp 1
457
458 @table @strong
459
460 @item f
461 t
462
463 @end table
464
465 @sp 1
466
467 Is an unknown data. To the element Block, write:
468
469 @sp 1
470
471 @table @strong
472
473 @item m
474 m
475
476 @end table
477
478 @sp 1
479
480 Because its mass is an unknown data. To the vertical force, applied to the block, write the same unknown data assigned to the vertical force applied to the Point (is the same string):
481
482 @sp 1
483
484 @table @strong
485
486 @item f
487 t
488
489 @end table
490
491 @sp 1
492
493 Now click in the icon Solve to get the answer.
494
495 @example
496
497 t = 1.809 N ; B = 1.767 N ; m = 0.184 kg ;
498 Status = success.
499
500 @end example
501
502 @page
503
504
505 @node Example 6 (s), Example 7 (s), Example 5 (s), Examples statics
506 @section Example 6
507
508 @cindex Example 6 (s)
509
510 A block of 5 kg is supported to a spring as show the image. If the spring constant is 500 N/m. Which is the stress in the string? How much the spring is stretched?
511
512 @center @image{s-e6-1, 3cm}
513
514 @sp 2
515
516 @strong{Solution with FisicaLab}
517
518 Erase the content of the chalkboard and select the SI system, and add one element Spring, one element Block, and one element Stationary reference system. Then add one element Force to the element Spring, and one element Force to the element Block, to make two free body diagrams as show the image below:
519
520 @center @image{s-e6-2, 3cm}
521
522 The element Stationary reference system write to default the gravity value. To the element Block, write:
523
524 @sp 1
525
526 @table @strong
527
528 @item m
529 5
530
531 @end table
532
533 @sp 1
534
535 To the vertical force applied to the spring, that is an unknown data, write:
536
537 @sp 1
538
539 @table @strong
540
541 @item f
542 t
543
544 @end table
545
546 @sp 1
547
548 To the element Spring, the length stretched is an unknown data, write:
549
550 @sp 1
551
552 @table @strong
553
554 @item k
555 500
556
557 @item d
558 d
559
560 @end table
561
562 @sp 1
563
564 To the vertical force applied to the block, that is an unknown data and the same unknown data that to the other force, write:
565
566 @sp 1
567
568 @table @strong
569
570 @item f
571 t
572
573 @end table
574
575 @sp 1
576
577 Now click in the icon Solve to get the answer.
578
579 @example
580
581 t = 49.050 N ; d = 0.098 m ;
582 Status = success.
583
584 @end example
585
586 @page
587
588
589 @node Example 7 (s), Example 8 (s), Example 6 (s), Examples statics
590 @section Example 7
591
592 @cindex Example 7 (s)
593
594 A spring support a block of unknown mass, see image below. If the constant spring is 150 N/m, and this is stretched 5 cm, Which is the mass of the block in grams?
595
596 @center @image{s-e7-1, 3cm}
597
598 @sp 2
599
600 @strong{Solution with FisicaLab}
601
602 Erase the content of the chalkboard and select the SI system, and add one element Spring, one element Block, and one element Stationary reference system. Then add one element Force to the element Spring, and one element Force to the element Block, to make two free body diagrams as show the image below:
603
604 @center @image{s-e7-2, 3cm}
605
606 The element Stationary reference system write to default the gravity value. To the element Block, write:
607
608 @sp 1
609
610 @table @strong
611
612 @item m
613 m @@ g
614
615 @end table
616
617 @sp 1
618
619 Because the mass is an unknown data, and we want this in grams. To the vertical force applied to the block, that is an unknown data, write:
620
621 @sp 1
622
623 @table @strong
624
625 @item f
626 f
627
628 @end table
629
630 @sp 1
631
632 To the element Spring, write:
633
634 @sp 1
635
636 @table @strong
637
638 @item k
639 150
640
641 @item d
642 -5 @@ cm
643
644 @end table
645
646 @sp 1
647
648 The negative sign is because the spring is stretched. To the vertical force applied to the block, that is an unknown data and the same unknown data that to the other force, write:
649
650 @sp 1
651
652 @table @strong
653
654 @item f
655 f
656
657 @end table
658
659 @sp 1
660
661 Now click in the icon Solve to get the answer.
662
663 @example
664
665 f = 7.500 N ; m = 764.526 g ;
666 Status = success.
667
668 @end example
669
670 @page
671
672
673 @node Example 8 (s), Example 9 (s), Example 7 (s), Examples statics
674 @section Example 8
675
676 @cindex Example 8 (s)
677
678 In the system shown in the image. Which is the value of the force F?
679
680 @sp 1
681
682 @center @image{s-e8-1, 6cm}
683
684 @sp 2
685
686 @strong{Solution with FisicaLab}
687
688 Erase the content of the chalkboard and select the SI system, and add the necessary elements to make the three free body diagrams as show the image below (The white circles are just for clarify):
689
690 @center @image{s-e8-2, 5cm}
691
692 To the element Block, write:
693
694 @sp 1
695
696 @table @strong
697
698 @item m
699 7
700
701 @end table
702
703 @sp 1
704
705 To the element force applied to the block, its values is an unknown data, calling this t1, write:
706
707 @sp 1
708
709 @table @strong
710
711 @item f
712 t1
713
714 @end table
715
716 @sp 1
717
718 To the elements Pulley the names are irrelevant. To the downwards vertical force applied to the pulley immediately above the block, write:
719
720 @sp 1
721
722 @table @strong
723
724 @item f
725 t1
726
727 @end table
728
729 @sp 1
730
731 Is the same string that support the block. In that pulley, the two upwards vertical forces, are unknown data, and the same unknown data, because is the same string. Calling this t2, write to both forces:
732
733 @sp 1
734
735 @table @strong
736
737 @item f
738 t2
739
740 @end table
741
742 @sp 1
743
744 In the other pulley, the downwards vertical force, and the oblique force are the same string, then to the vertical force write:
745
746 @sp 1
747
748 @table @strong
749
750 @item f
751 t2
752
753 @end table
754
755 @sp 1
756
757 And to the oblique force, write:
758
759 @sp 1
760
761 @table @strong
762
763 @item f
764 t2
765
766 @item ang
767 25
768
769 @end table
770
771 @sp 1
772
773 The others two forces are the reactions that support the pulley. Calling Ry the vertical reaction, write:
774
775 @sp 1
776
777 @table @strong
778
779 @item f
780 Ry
781
782 @end table
783
784 @sp 1
785
786 And calling Rx the horizontal reaction, write:
787
788 @sp 1
789
790 @table @strong
791
792 @item f
793 Rx
794
795 @end table
796
797 @sp 1
798
799 Now click in the icon Solve to get the answer.
800
801 @example
802
803 t2 = 34.335 N ; Ry = 48.846 N ; t1 = 68.670 N ;
804 Rx = -31.118 N ;
805 Status = success.
806
807 @end example
808
809 The negative sign in the Rx data is because the sense of this force, is the opposite of the force that we add to the pulley.
810
811 @page
812
813
814 @node Example 9 (s), , Example 8 (s), Examples statics
815 @section Example 9
816
817 @cindex Example 9 (s)
818
819 A block with a mass of 20 kg, is supported to a string, as shown the image. If the spring is stretched 4 centimeters, which is the constant spring? which are the reactions in A?
820
821 @center @image{s-e9-1, 5cm}
822
823 @sp 2
824
825 @strong{Solution with FisicaLab}
826
827 Erase the chalkboard and add the necessary elements to make three free body diagrams, as show the image below:
828
829 @center @image{s-e9-2, 6cm}
830
831 We don't need the reactions on the pulley, for that we don't add this. To the element Block, write:
832
833 @sp 1
834
835 @table @strong
836
837 @item m
838 20
839
840 @end table
841
842 @sp 1
843
844 To the force applied to the block:
845
846 @sp 1
847
848 @table @strong
849
850 @item f
851 t
852
853 @end table
854
855 @sp 1
856
857 To the spring write:
858
859 @sp 1
860
861 @table @strong
862
863 @item k
864 k
865
866 @item d
867 4 @@ cm
868
869 @end table
870
871 @sp 1
872
873 And to the forces applied to the spring, write in both:
874
875 @sp 1
876
877 @table @strong
878
879 @item f
880 t
881
882 @item ang
883 45
884
885 @end table
886
887 @sp 1
888
889 Here the angle is irrelevant. The magnitude of the oblique force applied to the point, is an unknown data, but is the same unknown data applied to the spring. Then write:
890
891 @sp 1
892
893 @table @strong
894
895 @item f
896 t
897
898 @item ang
899 45
900
901 @end table
902
903 @sp 1
904
905 We calling the reactions forces applied to the point, Ry and Rx, respectively. Then write:
906
907 @sp 1
908
909 @table @strong
910
911 @item f
912 Ry
913
914 @end table
915
916 @sp 2
917
918 @table @strong
919
920 @item f
921 Rx
922
923 @end table
924
925 @sp 1
926
927 Now click in the icon Solve to get the answer.
928
929 @example
930
931 t = 196.200 N ; k = 4905.000 N/m ; Rx = 138.734 N ;
932 Ry = -138.734 N ;
933 Status = success.
934
935 @end example
936
937 The negative sign in the Ry data is because the sense of this force, is the opposite of the force that we add to the pulley.