Debian Codegraph @

Documentation/Manual/English/dynamics.texinfo

raw
1 @c -*-texinfo-*-
2 @c This is part of the FisicaLab User Manual.
3 @c Copyright (C) 2013 German A. Arias.
4 @c See the file copying.texinfo for copying conditions.
5
6 @node Dynamics, Examples dynamics of particles, Examples statics rigid bodies, Top
7 @chapter Module dynamics of particles
8
9 @cindex Module dynamics of particles
10
11 The conversion factors for SI system are:
12
13 @sp 2
14
15 @table @strong
16
17 @item h
18 hour
19
20 @item min
21 minute
22
23 @item hp
24 horse power
25
26 @item cv
27 steam horses
28
29 @item T
30 metric ton
31
32 @item g
33 gram
34
35 @item slug
36 slug
37
38 @item km
39 kilometer
40
41 @item cm
42 centimeter
43
44 @item mm
45 millimeter
46
47 @item mi
48 mile
49
50 @item ft
51 feet
52
53 @item in
54 inch
55
56 @item km/h
57 kilometers per hour
58
59 @item cm/s
60 centimeters per second
61
62 @item mm/s
63 millimeters per second
64
65 @item mph
66 miles per hour
67
68 @item ft/s
69 feet per second
70
71 @item in/s
72 inch per second
73
74 @item kt
75 knot
76
77 @item cm/s2
78 centimeters per squared second
79
80 @item mm/s2
81 millimeters per squared second
82
83 @item ft/s2
84 feet per squared second
85
86 @item in/s2
87 inch per squared second
88
89 @end table
90
91 @page
92
93 And for the English system are:
94
95 @sp 2
96
97 @table @strong
98
99 @item h
100 hour
101
102 @item min
103 minute
104
105 @item hp
106 horsepower
107
108 @item cv
109 steam horses
110
111 @item kg
112 kilogram
113
114 @item g
115 gram
116
117 @item km
118 kilometer
119
120 @item m
121 meter
122
123 @item cm
124 centimeter
125
126 @item mm
127 millimeter
128
129 @item mi
130 mile
131
132 @item in
133 feet
134
135 @item km/h
136 kilometers per hour
137
138 @item m/s
139 meters per second
140
141 @item cm/s
142 centimeters per second
143
144 @item mm/s
145 millimeters per second
146
147 @item mph
148 miles per hour
149
150 @item in/s
151 inch per second
152
153 @item kt
154 knot
155
156 @item m/s2
157 meters per squared second
158
159 @item cm/s2
160 centimeters per squared second
161
162 @item mm/s2
163 millimeters per squared second
164
165 @item in/s2
166 inch per squared second
167
168 @item lb/in
169 pound per inch
170
171 @end table
172
173 @sp 2
174
175 In this module, the forces (elements Force, Friction or Contact) are added to the objects (elements Block, Pulley or Spring) placing the force in one of the cells around the object. Each object (if there isn't in the chalkboard's border) have 8 cells around it. This module have 44 elements, presented below. With a description of each one, its data and its number of equations. Note that some elements have one or two equations, depending of the applied forces, or of the objects that interact with it.
176
177 @page
178
179
180 @menu
181 * Stationary reference system: Stationary reference system (d).
182 * Mobile: Mobile (d).
183 * Mobile in X/Y: Mobile in X/Y (d).
184 * Block with vertical movement: Block vertical (d).
185 * Block with horizontal movement: Block horizontal (d).
186 * Block with movement along an inclined plane to the left: Block plane to the left (d).
187 * Block with movement along an inclined plane to the right: Block plane to the right (d).
188 * Pulley: Pulley (d).
189 * Springs: Springs (d).
190 * Forces: Forces (d).
191 * Frictions: Frictions (d).
192 * Frictions between blocks (contacts): Frictions between blocks (d).
193 * Relation between accelerations: Relation between accelerations (d).
194 * Relative motion: Relative motion (d).
195 * Collision: Collision (d).
196 * Energy: Energy (d).
197 * Momentum: Momentum (d).
198 * Power: Power (d).
199 @end menu
200
201 @node Stationary reference system (d), Mobile (d), Dynamics, Dynamics
202 @section Stationary reference system
203
204 @cindex Stationary reference system (d)
205
206 @image{s_fijo}
207
208 Stationary reference system, with X axis horizontal and positive to the right, and Y axis vertical an positive to upwards.
209
210 @multitable @columnfractions .15 .6
211
212 @item Equations:
213 @tab None.
214
215 @headitem Data:
216 @tab
217
218 @item g:
219 @tab Value of the gravity (absolute value). To default FisicaLab write the gravity value to the selected system (9.81 m/s2 to SI, and 32.2 ft/s2 to English system).
220
221 @item t:
222 @tab End time to the problem.
223
224 @end multitable
225
226 @page
227
228
229 @node Mobile (d), Mobile in X/Y (d), Stationary reference system (d), Dynamics
230 @section Mobile
231
232 @cindex Mobile (d)
233
234 @image{particula}
235
236 Mobile to collision problems. The angles are measured from the positive X axis, and the positive sense is the opposite of clockwise.
237
238 @multitable @columnfractions .15 .6
239
240 @item Equations:
241 @tab None.
242
243 @headitem Data:
244 @tab
245
246 @item Name:
247 @tab Name of the mobile.
248
249 @item m:
250 @tab Mass of the mobile.
251
252 @item vi:
253 @tab Initial velocity, in the direction specified by the initial angle.
254
255 @item angi:
256 @tab Initial angle.
257
258 @item vf:
259 @tab Final velocity, in the direction specified by the final angle.
260
261 @item angf:
262 @tab Final angle.
263
264 @end multitable
265
266 @page
267
268
269 @node Mobile in X/Y (d), Block vertical (d), Mobile (d), Dynamics
270 @section Mobile in X/Y
271
272 @cindex Mobile in X/Y (d)
273
274 @image{movil_x}
275 @image{movil_y}
276
277 Mobiles with movement along the X and Y axis, respectively.
278
279 @multitable @columnfractions .15 .6
280
281 @item Equations:
282 @tab None.
283
284 @headitem Data:
285 @tab
286
287 @item Name:
288 @tab Name of the mobile.
289
290 @item m:
291 @tab Mass of the mobile.
292
293 @item vi:
294 @tab Initial velocity.
295
296 @item vf:
297 @tab Final velocity.
298
299 @end multitable
300
301 @page
302
303
304 @node Block vertical (d), Block horizontal (d), Mobile in X/Y (d), Dynamics
305 @section Block with vertical movement
306
307 @cindex Block with vertical movement (d)
308
309 @image{bloque_v}
310
311 Block with vertical movement. Allows only one friction force, vertical or horizontal.
312
313 @multitable @columnfractions .15 .6
314
315 @item Equations:
316 @tab 3 or 4 (if all the applied forces are vertical the block have 3 equation, otherwise have 4).
317
318 @headitem Data:
319 @tab
320
321 @item Name:
322 @tab Name of the block.
323
324 @item m:
325 @tab Mass block.
326
327 @item a:
328 @tab Acceleration of the block.
329
330 @item vi:
331 @tab Initial velocity.
332
333 @item vf:
334 @tab Final velocity.
335
336 @item d:
337 @tab Travelled distance.
338
339 @item Relative to:
340 @tab To default is @emph{sf} meaning that the data is measured from a stationary reference system. But you can set a block whit horizontal movement, if the data is relative to that block.
341
342 @end multitable
343
344 @page
345
346
347 @node Block horizontal (d), Block plane to the left (d), Block vertical (d), Dynamics
348 @section Block with horizontal movement
349
350 @cindex Block with horizontal movement (d)
351
352 @image{bloque_h}
353
354 Block with horizontal movement. Allows only one horizontal friction force.
355
356 @multitable @columnfractions .15 .6
357
358 @item Equations:
359 @tab 4
360
361 @headitem Data:
362 @tab
363
364 @item Name:
365 @tab Name of the block.
366
367 @item m:
368 @tab Mass of the block.
369
370 @item a:
371 @tab Acceleration of the block.
372
373 @item vi:
374 @tab Initial velocity.
375
376 @item vf:
377 @tab Final velocity.
378
379 @item d:
380 @tab Travelled distance.
381
382 @item Relative to:
383 @tab To default is @emph{sf} meaning that the data is measured from a stationary reference system. But you can set a block, if the data is relative to that block.
384
385 @end multitable
386
387 @page
388
389
390 @node Block plane to the left (d), Block plane to the right (d), Block horizontal (d), Dynamics
391 @section Block with movement along an inclined plane to the left
392
393 @cindex Block with movement along an inclined plane to the left (d)
394
395 @image{bloque_i}
396
397 The data of this object are referring to a reference system, with the X axis along the plane and positive to upwards. And Y axis perpendicular to the plane and positive to upwards. Allows only one friction force parallel to the plane.
398
399 @multitable @columnfractions .15 .6
400
401 @item Equations:
402 @tab 4
403
404 @headitem Data:
405 @tab
406
407 @item Name:
408 @tab Name of the block.
409
410 @item m:
411 @tab Mass of the block.
412
413 @item ang:
414 @tab Angle of the plane, measured from the horizontal.
415
416 @item a:
417 @tab Acceleration of the block.
418
419 @item vi:
420 @tab Initial velocity.
421
422 @item vf:
423 @tab Final velocity.
424
425 @item d:
426 @tab Travelled distance.
427
428 @item Relative to:
429 @tab To default is @emph{sf} meaning that the data is measured from a stationary reference system. But you can set a block, if the data is relative to that block.
430
431 @end multitable
432
433 @page
434
435
436 @node Block plane to the right (d), Pulley (d), Block plane to the left (d), Dynamics
437 @section Block with movement along an inclined plane to the right
438
439 @cindex Block with movement along an inclined plane to the right (d)
440
441 @image{bloque_d}
442
443 The data of this object are referring to a reference system, with the X axis along the plane and positive to upwards. And Y axis perpendicular to the plane and positive to upwards. Allows only one friction force parallel to the plane.
444
445 @multitable @columnfractions .15 .6
446
447 @item Equations:
448 @tab 4
449
450 @headitem Data:
451 @tab
452
453 @item Name:
454 @tab Name of the block.
455
456 @item m:
457 @tab Mass of the block.
458
459 @item ang:
460 @tab Angle of the plane, measured from the horizontal.
461
462 @item a:
463 @tab Acceleration of the block.
464
465 @item vi:
466 @tab Initial velocity.
467
468 @item vf:
469 @tab Final velocity.
470
471 @item d:
472 @tab Travelled distance.
473
474 @item Relative to:
475 @tab To default is @emph{sf} meaning that the data is measured from a stationary reference system. But you can set a block, if the data is relative to that block.
476
477 @end multitable
478
479 @page
480
481
482 @node Pulley (d), Springs (d), Block plane to the right (d), Dynamics
483 @section Pulley
484
485 @cindex Pulley (d)
486
487 @image{polea}
488
489 Pulley without mass. Don't allows frictions or contacts.
490
491 @multitable @columnfractions .15 .6
492
493 @item Equations:
494 @tab 1 or 2 (if all applied forces are vertical, or horizontal, the block have 1 equation, otherwise have 2).
495
496 @headitem Data:
497 @tab
498
499 @item Name:
500 @tab Name of the pulley (this data is irrelevant).
501
502 @end multitable
503
504
505 @node Springs (d), Forces (d), Pulley (d), Dynamics
506 @section Springs
507
508 @cindex Springs (d)
509
510 @image{resortes}
511
512 Springs without mass, that satisfies the Hooke's law. @emph{xi} and @emph{xf} are, respectively, the initial and end length that the spring is stretched or compressed. If the spring is stretched the length is positive, if is compressed is negative. Allow one or two forces. If have two forces these must have different sense (stretching or compressing the spring), and the same values or unknown data. Don't allows frictions or contacts. The forces must be in the direction which will move the spring (see examples).
513
514 @multitable @columnfractions .15 .6
515
516 @item Equations:
517 @tab 1
518
519 @headitem Data:
520 @tab
521
522 @item k:
523 @tab Spring constant.
524
525 @item xi:
526 @tab Initial length.
527
528 @item xf:
529 @tab Final length.
530
531 @end multitable
532
533 @page
534
535
536 @node Forces (d), Frictions (d), Springs (d), Dynamics
537 @section Forces
538
539 @cindex Forces (d)
540
541 @image{fuerzas}
542
543 Forces with the direction and sense of the arrow.
544
545 @multitable @columnfractions .15 .6
546
547 @item Equations:
548 @tab None.
549
550 @headitem Data:
551 @tab
552
553 @item f
554 @tab Magnitude of the force.
555
556 @item ang
557 @tab Positive angle of the force, measured from the horizontal. This entry is displayed only for oblique forces.
558
559 @end multitable
560
561
562 @node Frictions (d), Frictions between blocks (d), Forces (d), Dynamics
563 @section Frictions
564
565 @cindex Frictions (d)
566
567 @image{fricciones}
568
569 Frictions with the direction and sense of the arrow. The oblique frictions, to be applied to a block on an inclined plane, are assumed parallels to the plane.
570
571 @multitable @columnfractions .15 .6
572
573 @item Equations:
574 @tab None.
575
576 @headitem Data:
577 @tab
578
579 @item Normal:
580 @tab Normal to calculate the friction force.
581
582 @item u:
583 @tab Friction coefficient, static or dynamic.
584
585 @end multitable
586
587 @page
588
589
590 @node Frictions between blocks (d), Relation between accelerations (d), Frictions (d), Dynamics
591 @section Frictions between blocks (contacts)
592
593 @cindex Frictions between blocks (contacts) (d)
594
595 @image{contactos}
596
597 Friction forces between blocks, with the direction and sense of the arrows.
598
599 @multitable @columnfractions .15 .6
600
601 @item Equations:
602 @tab None.
603
604 @headitem Data:
605 @tab
606
607 @item Normal:
608 @tab Normal to calculate the friction force.
609
610 @item u:
611 @tab Friction coefficient, static or dynamic.
612
613 @item ang:
614 @tab Positive angle of the friction, measured from the horizontal. This entry is displayed only for oblique frictions.
615
616 @end multitable
617
618
619 @node Relation between accelerations (d), Relative motion (d), Frictions between blocks (d), Dynamics
620 @section Relation between accelerations
621
622 @cindex Relation between accelerations (d)
623
624 @image{relacion}
625
626 Allows to make a relation between the magnitudes of accelerations measured in different reference systems.
627
628 @multitable @columnfractions .15 .6
629
630 @item Equations:
631 @tab 1
632
633 @headitem Data:
634 @tab
635
636 @item a1:
637 @tab Acceleration of the first block.
638
639 @item a2:
640 @tab Acceleration of the second block.
641
642 @item z:
643 @tab The relation factor, to default is -1.
644
645 @end multitable
646
647 @page
648
649
650 @node Relative motion (d), Collision (d), Relation between accelerations (d), Dynamics
651 @section Relative motion
652
653 @cindex Relative motion (d)
654
655 @image{mov_rel}
656
657 Allows get the acceleration, final velocity and travelled distance of a block in reference to the stationary system. When its data is relative to another block, that making a mobile reference system. The angles are measured from the positive X axis, and the positive sense is the opposite of clockwise.
658
659 @multitable @columnfractions .15 .6
660
661 @item Equations:
662 @tab 6
663
664 @headitem Data:
665 @tab
666
667 @item Object:
668 @tab Name of the object that its data is relative.
669
670 @item asf:
671 @tab Magnitude of the acceleration.
672
673 @item ang_asf:
674 @tab Angle of the acceleration vector.
675
676 @item vf_sf:
677 @tab Magnitude of the final velocity.
678
679 @item ang_vfsf:
680 @tab Angle of the final velocity vector.
681
682 @item dsf:
683 @tab Travelled distance of the block.
684
685 @item ang_dsf:
686 @tab Angle of the travelled distance.
687
688 @end multitable
689
690 @page
691
692
693 @node Collision (d), Energy (d), Relative motion (d), Dynamics
694 @section Collision
695
696 @cindex Collision (d)
697
698 @image{colision}
699
700 Collision between mobiles. Allows collision between two Mobile in X, or two Mobile in Y. Or between two Mobile. Any other collision isn't allowed.
701
702 @multitable @columnfractions .15 .6
703
704 @item Equations:
705 @tab 2 or 4 (if the collision is between two mobiles in x, or two mobiles in Y, have 2 equations. Otherwise 4).
706
707 @headitem Data:
708 @tab
709
710 @item Object 1:
711 @tab Name of first mobile.
712
713 @item Object 2:
714 @tab Name of second mobile.
715
716 @item e:
717 @tab Coefficient of restitution.
718
719 @item angn:
720 @tab Angle of the normal between the objects (when collide). Measured from the positive X axis. The positive sense is the opposite of clockwise.
721
722 @end multitable
723
724 @page
725
726
727 @node Energy (d), Momentum (d), Collision (d), Dynamics
728 @section Energy
729
730 @cindex Energy (d)
731
732 @image{energia}
733
734 Set the principle of energy and work to 1, 2, 3, or 4 blocks or mobiles.
735
736 @multitable @columnfractions .15 .6
737
738 @item Equations:
739 @tab 1
740
741 @headitem Data:
742 @tab
743
744 @item Object 1:
745 @tab Name of the first block or mobile.
746
747 @item Object 2:
748 @tab Name of the second block or mobile.
749
750 @item Object 3:
751 @tab Name of the third block or mobile.
752
753 @item Object 4:
754 @tab Name of four block or mobile.
755
756 @item W:
757 @tab External work to the system.
758
759 @end multitable
760
761 @page
762
763
764 @node Momentum (d), Power (d), Energy (d), Dynamics
765 @section Momentum
766
767 @cindex Momentum (d)
768
769 @image{momento}
770
771 Set the principle of momentum and impulse, to one block or mobile.
772
773 @multitable @columnfractions .15 .6
774
775 @item Equations:
776 @tab 2
777
778 @headitem Data:
779 @tab
780
781 @item Object:
782 @tab Name of the block or mobile.
783
784 @item Imp:
785 @tab Magnitude of the impulse's vector.
786
787 @item ang:
788 @tab Angle of the impulse's vector. Measured from the positive X axis. The positive sense is the opposite of clockwise.
789
790 @item fImp:
791 @tab Impulsive force.
792
793 @end multitable
794
795
796 @node Power (d), , Momentum (d), Dynamics
797 @section Power
798
799 @cindex Power (d)
800
801 @image{potencia}
802
803 It measures the developed power.
804
805 @multitable @columnfractions .15 .6
806
807 @item Equations:
808 @tab 1
809
810 @headitem Data:
811 @tab
812
813 @item Object:
814 @tab Name of the block.
815
816 @item P:
817 @tab Power.
818
819 @end multitable