Debian Codegraph @

Documentation/Manual/English/calorimetry-examples.texinfo

raw
1 @c -*-texinfo-*-
2 @c This is part of the FisicaLab User Manual.
3 @c Copyright (C) 2013, 2023 German A. Arias.
4 @c See the file copying.texinfo for copying conditions.
5
6 @node Examples calorimetry, Thermodynamics, Calorimetry, Top
7 @chapter Examples calorimetry
8
9 @cindex Examples calorimetry
10
11
12 @menu
13 * Example 1 (cal)::
14 * Example 2 (cal)::
15 * Example 3 (cal)::
16 * Example 4 (cal)::
17 * Example 5 (cal)::
18 * Example 6 (cal)::
19 * Example 7 (cal)::
20 * Example 8 (cal)::
21 * Example 9 (cal)::
22 * Example 10 (cal)::
23 * Example 11 (cal)::
24 * Example 12 (cal)::
25 * Example 13 (cal)::
26 @end menu
27
28
29 @node Example 1 (cal), Example 2 (cal), Examples calorimetry, Examples calorimetry
30 @section Example 1
31
32 @cindex Example 1 (cal)
33
34 A block of copper (specific heat 390 J/kg*K) of 0.5 kg have an initial temperature of 17 C. If this block get 150 calories, what will be its final temperature in Celsius?
35
36 @sp 2
37
38 @strong{Solution with FisicaLab}
39
40 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Block and one element Applied heat. As show the image below:
41
42 @center @image{cal-e1, 3cm}
43
44 To the element Block, that represent the block of copper, we have:
45
46 @sp 1
47
48 @table @strong
49
50 @item Name
51 0
52
53 @item m
54 0.5
55
56 @item c
57 390
58
59 @item Ti
60 17 @@ C
61
62 @item Tf
63 tf @@ C
64
65 @end table
66
67 @sp 1
68
69 And to the element Applied heat:
70
71 @sp 1
72
73 @table @strong
74
75 @item Q
76 150 @@ cal
77
78 @end table
79
80 @sp 1
81
82 Now click in the icon Solve to get the answer:
83
84 @example
85
86 tf = 20.221 C ;
87 Status = success.
88
89 @end example
90
91 @page
92
93
94 @node Example 2 (cal), Example 3 (cal), Example 1 (cal), Examples calorimetry
95 @section Example 2
96
97 @cindex Example 2 (cal)
98
99 An electric heater of 1500 Watts is placed in 10 kilograms of water (specific heat 4187 J/kg*K) with an initial temperature of 24 C. What will be the final temperature of the water in Celsius, after 8 minutes (assuming that all the heat generated by the heater is absorbed by water)?
100
101 @sp 2
102
103 @strong{Solution with FisicaLab}
104
105 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Liquid, one element Applied heat flow and one element Laboratory clock. As show the image below:
106
107 @center @image{cal-e2, 3cm}
108
109 To the element Liquid, the 10 kg of water, we have:
110
111 @sp 1
112
113 @table @strong
114
115 @item Name
116 0
117
118 @item m
119 10
120
121 @item c
122 4187
123
124 @item Ti
125 24 @@ C
126
127 @item Tf
128 tf @@ C
129
130 @end table
131
132 @sp 1
133
134 Now to the element Applied heat flow:
135
136 @sp 1
137
138 @table @strong
139
140 @item dQ/dt
141 1500
142
143 @end table
144
145 @sp 1
146
147 And to the element Laboratory clock:
148
149 @sp 1
150
151 @table @strong
152
153 @item t
154 8 @@ min
155
156 @end table
157
158 @sp 1
159
160 Now click in the icon Solve to get the answer:
161
162 @example
163
164 tf = 41.196 C ;
165 Status = success.
166
167 @end example
168
169 @page
170
171
172 @node Example 3 (cal), Example 4 (cal), Example 2 (cal), Examples calorimetry
173 @section Example 3
174
175 @cindex Example 3 (cal)
176
177 A bar of aluminum (coefficient of linear expansion 24E-6 1/K) of 55 cm and an initial temperature of 20 C, increases its temperature to 100 C. What is the length of the bar at this temperature?
178
179 @sp 2
180
181 @strong{Solution with FisicaLab}
182
183 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Linear expansion as show the image below:
184
185 @center @image{cal-e3, 3cm}
186
187 To this element, we have:
188
189 @sp 1
190
191 @table @strong
192
193 @item k
194 24E-6
195
196 @item Li
197 55 @@ cm
198
199 @item Lf
200 Lf @@ cm
201
202 @item Ti
203 20 @@ cm
204
205 @item Tf
206 100 @@ cm
207
208 @end table
209
210 @sp 1
211
212 Now click in the icon Solve to get the answer:
213
214 @example
215
216 Lf = 55.106 cm ;
217 Status = success.
218
219 @end example
220
221 @page
222
223
224 @node Example 4 (cal), Example 5 (cal), Example 3 (cal), Examples calorimetry
225 @section Example 4
226
227 @cindex Example 4 (cal)
228
229 At 24 C the volume of a recipient of copper is 1 Liter (coefficient of volumetric expansion 51E-6 1/K). What will be its volume, in liters, at 110 C?
230
231 @sp 2
232
233 @strong{Solution with FisicaLab}
234
235 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Volumetric expansion as show the image below:
236
237 @center @image{cal-e4, 3cm}
238
239 To this element, we have:
240
241 @sp 1
242
243 @table @strong
244
245 @item k
246 51E-6
247
248 @item Vi
249 1 @@ L
250
251 @item Vf
252 Vf @ L
253
254 @item Ti
255 24 @@ C
256
257 @item Tf
258 110 @@ C
259
260 @end table
261
262 @sp 1
263
264 Now click in the icon Solve to get the answer:
265
266 @example
267
268 Vf = 1.004 L ;
269 Status = success.
270
271 @end example
272
273 @page
274
275
276 @node Example 5 (cal), Example 6 (cal), Example 4 (cal), Examples calorimetry
277 @section Example 5
278
279 @cindex Example 5 (cal)
280
281 How much heat must be removed to solidify 250 grams of cast iron at its melting point? Give your answer in Joules (heat of fusion of iron = 69.1 cal / g).
282
283 @sp 2
284
285 @strong{Solution with FisicaLab}
286
287 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Change of state solid-liquid and one element Heat extracted. As show the image below:
288
289 @center @image{cal-e5, 3cm}
290
291 To the element Change of state, we have:
292
293 @sp 1
294
295 @table @strong
296
297 @item Name
298 0
299
300 @item m
301 250 @@ g
302
303 @item cf
304 69.1 @@ cal/g
305
306 @item Sense
307 <
308
309 @end table
310
311 @sp 1
312
313 In the entry of @emph{Sense} we type @kbd{<} because the change of state is from liquid to solid. Now to the element Heat extracted:
314
315 @sp 1
316
317 @table @strong
318
319 @item Q
320 Q
321
322 @end table
323
324 @sp 1
325
326 Then click in the icon Solve to get the answer:
327
328 @example
329
330 Q = 72330.425 J ;
331 Status = success.
332
333 @end example
334
335 @page
336
337
338 @node Example 6 (cal), Example 7 (cal), Example 5 (cal), Examples calorimetry
339 @section Example 6
340
341 @cindex Example 6 (cal)
342
343 How much heat in calories must be added to transform a block of 3 kg of ice at -5 C, in water at + 22 C? (specific heat of ice = 0.50 cal/g*K, specific heat of water = 1 cal/g*K, and heat of fusion of water = 79.7 cal/g).
344
345 @sp 2
346
347 @strong{Solution with FisicaLab}
348
349 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Process, one element Applied heat (applied to the element Process), one element Block, one element Change of state solid-liquid and one element Liquid. As show the image below (the yellow arrows are only to indicate the direction of the process):
350
351 @center @image{cal-e6, 8cm}
352
353 To the element Applied heat, with the conversion factor to kilocalories, we have:
354
355 @sp 1
356
357 @table @strong
358
359 @item Q
360 Q @@ cal
361
362 @end table
363
364 @sp 1
365
366 The element Process, whose name in this issue is irrelevant, represents the change of the water from its solid state at -5 C until liquid state at 22 C. This element must contain the element Block, which represents the water in solid state, the element Change of state solid-liquid, which represents the change of state of the water, and the element Liquid, which represents the final state of the water. These elements gonna be called @emph{Solid}, @emph{Fusion} and @emph{Liquid}, respectively. Then to the element Process we have:
367
368 @sp 1
369
370 @table @strong
371
372 @item Name
373 0
374
375 @item Object 1
376 Solid
377
378 @item Object 2
379 Fusion
380
381 @item Object 3
382 Liquid
383
384 @item Object 4
385 0
386
387 @item Object 5
388 0
389
390 @end table
391
392 @sp 1
393
394 Now to the element Block, which represents the water in solid state and that we will call @emph{Solid}, because this name have in the element Process, we have:
395
396 @sp 1
397
398 @table @strong
399
400 @item Name
401 Solid
402
403 @item m
404 3
405
406 @item c
407 0.5 @@ cal/g*K
408
409 @item Ti
410 -5 @@ C
411
412 @item Tf
413 0 @@ C
414
415 @end table
416
417 @sp 1
418
419 Now the element Change of state, called @emph{Fusion}, is:
420
421 @sp 1
422
423 @table @strong
424
425 @item Name
426 Fusion
427
428 @item m
429 3
430
431 @item cf
432 79.7 @@ cal/g
433
434 @item Sense
435 >
436
437 @end table
438
439 @sp 1
440
441 And to the element Liquid, which represents the final state of the water and called @emph{Liquid}, we have:
442
443 @sp 1
444
445 @table @strong
446
447 @item Name
448 Liquid
449
450 @item m
451 3
452
453 @item c
454 1 @@ cal/g*K
455
456 @item Ti
457 0 @@ C
458
459 @item Tf
460 22 @@ C
461
462 @end table
463
464 @sp 1
465
466 Now click in the icon Solve to get the answer:
467
468 @example
469
470 Q = 312.600 kcal ;
471 Status = success.
472
473 @end example
474
475 @page
476
477
478 @node Example 7 (cal), Example 8 (cal), Example 6 (cal), Examples calorimetry
479 @section Example 7
480
481 @cindex Example 7 (cal)
482
483 How much heat, in calories, should be removed to convert 25 g of molten lead at its melting point, in solid lead at 310 C? (Specific heat of the lead = 0.031 cal/g*K, heat of fusion of the lead = 5.54 cal/g, and melting temperature of the lead = 327 C).
484
485 @sp 2
486
487 @strong{Solution with FisicaLab}
488
489 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Process, one element Heat extracted (applied to the element Process), one element Change of state solid-liquid and one element Block. As show the image below (the yellow arrow are only to indicate the direction of the process):
490
491 @center @image{cal-e7, 7cm}
492
493 To the element Heat extracted, we have, using the conversion factor to calories:
494
495 @sp 1
496
497 @table @strong
498
499 @item Q
500 Q @@ cal
501
502 @end table
503
504 @sp 1
505
506 To the element Process (the elements Block and Change of state gonna be called @emph{Solid} and @emph{Fusion} respectively), we have:
507
508 @sp 1
509
510 @table @strong
511
512 @item Name
513 0
514
515 @item Object 1
516 Fusion
517
518 @item Object 2
519 Solid
520
521 @item Object 3
522 0
523
524 @item Object 4
525 0
526
527 @item Object 5
528 0
529
530 @end table
531
532 @sp 1
533
534 To the element Block, called @emph{Solid}, we have:
535
536 @sp 1
537
538 @table @strong
539
540 @item Name
541 Solid
542
543 @item m
544 25 @@ g
545
546 @item c
547 0.031 @@ cal/g*K
548
549 @item Ti
550 327 @@ C
551
552 @item Tf
553 310 @@ C
554
555 @end table
556
557 @sp 1
558
559 Note that the initial temperature is 327 C and the final 310 C. Now to the element Change of state solid-liquid, called @emph{Fusion}, we have care with direction of the change of state (sign <). Then:
560
561 @sp 1
562
563 @table @strong
564
565 @item Name
566 Fusion
567
568 @item m
569 25 @@ g
570
571 @item cf
572 5.54 @@ cal/g
573
574 @item Sense
575 <
576
577 @end table
578
579 @sp 1
580
581 Now click in the icon Solve to get the answer:
582
583 @example
584
585 Q = 151.675 cal ;
586 Status = success.
587
588 @end example
589
590 @page
591
592
593 @node Example 8 (cal), Example 9 (cal), Example 7 (cal), Examples calorimetry
594 @section Example 8
595
596 @cindex Example 8 (cal)
597
598 A rubber balloon inflated have a volume of 2000 cm3 at 18 C. If its temperature is increased at 30 C, What will be the new volume of the balloon (in cm3)?
599
600 @sp 2
601
602 @strong{Solution with FisicaLab}
603
604 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Gas at constant pressure, as show the image below:
605
606 @center @image{cal-e8, 3cm}
607
608 To this element, with the corresponding conversion factors, we have:
609
610 @sp 1
611
612 @table @strong
613
614 @item Vi
615 2000 @@ cm3
616
617 @item Ti
618 18 @@ C
619
620 @item Vf
621 Vf @@ cm3
622
623 @item Tf
624 30 @@ C
625
626 @end table
627
628 @sp 1
629
630 Now click in the icon Solve to get the answer:
631
632 @example
633
634 Vf = 2082.435 cm3 ;
635 Status = success.
636
637 @end example
638
639 @page
640
641
642 @node Example 9 (cal), Example 10 (cal), Example 8 (cal), Examples calorimetry
643 @section Example 9
644
645 @cindex Example 9 (cal)
646
647 A certain gas have a volume of 5 liters, at 10 C and 750 mmHg of pressure. What will be the volume at 100 C and 3 atmospheres of pressure?
648
649 @sp 2
650
651 @strong{Solution with FisicaLab}
652
653 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Gas PV/T, as show the image below:
654
655 @center @image{cal-e9, 3cm}
656
657 To this element, with the corresponding conversion factors, we have:
658
659 @sp 1
660
661 @table @strong
662
663 @item Pi
664 750 @@ mmHg
665
666 @item Vi
667 5 @@ L
668
669 @item Ti
670 10 @@ C
671
672 @item Pf
673 3 @@ atm
674
675 @item Vf
676 Vf @@ L
677
678 @item Tf
679 100 @@ C
680
681 @end table
682
683 @sp 1
684
685 Now click in the icon Solve to get the answer:
686
687 @example
688
689 Vf = 2.162 L ;
690 Status = success.
691
692 @end example
693
694 @page
695
696
697 @node Example 10 (cal), Example 11 (cal), Example 9 (cal), Examples calorimetry
698 @section Example 10
699
700 @cindex Example 10 (cal)
701
702 In a plastic cup of minimum heat capacity, we mix 300 g of water at 10 C, with 185 g of water at 100 C. What is the final temperature in Celsius? (Specific heat of water = 4187 J/kg*K).
703
704 @sp 2
705
706 @strong{Solution with FisicaLab}
707
708 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Calorimetry and two elements Liquid. As show the image below:
709
710 @center @image{cal-e10, 3cm}
711
712 To one of the elements Liquid, we call this A and represent the 300 g of water, we have:
713
714 @sp 1
715
716 @table @strong
717
718 @item Name
719 A
720
721 @item m
722 300 @@ g
723
724 @item c
725 4187
726
727 @item Ti
728 10 @@ C
729
730 @item Tf
731 Tf @@ C
732
733 @end table
734
735 @sp 1
736
737 To the other element Liquid, we call this B and represent the 185 g of water, we have:
738
739 @sp 1
740
741 @table @strong
742
743 @item Name
744 B
745
746 @item m
747 185 @@ g
748
749 @item c
750 4187
751
752 @item Ti
753 100 @@ C
754
755 @item Tf
756 Tf @@ C
757
758 @end table
759
760 @sp 1
761
762 Note that the final temperature is the same unknown data in both elements, as must be. Now to the element Calorimetry:
763
764 @sp 1
765
766 @table @strong
767
768 @item Object 1
769 A
770
771 @item Object 2
772 B
773
774 @item Object 3
775 0
776
777 @item Object 4
778 0
779
780 @end table
781
782 @sp 1
783
784 Now click in the icon Solve to get the answer:
785
786 @example
787
788 Tf = 44.330 C ;
789 Status = success.
790
791 @end example
792
793 @page
794
795
796 @node Example 11 (cal), Example 12 (cal), Example 10 (cal), Examples calorimetry
797 @section Example 11
798
799 @cindex Example 11 (cal)
800
801 In a calorimeter with 325 g of water at 20 C, is introduced 77 g of an unknown metal at 90 C. If the final temperature is 26 C, what is the specific heat of the metal? (Specific heat of water = 4187 J/kg*K).
802
803 @sp 2
804
805 @strong{Solution with FisicaLab}
806
807 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Calorimetry, one element Block and one element Liquid. As show the image below:
808
809 @center @image{cal-e11, 3cm}
810
811 To the element Liquid, we call this @emph{Water}, we have:
812
813 @sp 1
814
815 @table @strong
816
817 @item Name
818 Water
819
820 @item m
821 325 @@ g
822
823 @item c
824 4187
825
826 @item Ti
827 20 @@ C
828
829 @item Tf
830 26 @@ C
831
832 @end table
833
834 @sp 1
835
836 And to the element Block, we call this @emph{Metal}, we have:
837
838 @sp 1
839
840 @table @strong
841
842 @item Name
843 Metal
844
845 @item m
846 77 @@ g
847
848 @item c
849 cM
850
851 @item Ti
852 90 @@ C
853
854 @item Tf
855 26 @@ C
856
857 @end table
858
859 @sp 1
860
861 Note that the final temperature is the same in both elements, as must be. To the element Calorimetry, we have:
862
863 @sp 1
864
865 @table @strong
866
867 @item Object 1
868 Water
869
870 @item Object 2
871 Metal
872
873 @item Object 3
874 0
875
876 @item Object 4
877 0
878
879 @end table
880
881 @sp 1
882
883 Now click in the icon Solve to get the answer:
884
885 @example
886
887 cM = 1656.788 J/kg*K ;
888 Status = success.
889
890 @end example
891
892 @page
893
894
895 @node Example 12 (cal), Example 13 (cal), Example 11 (cal), Examples calorimetry
896 @section Example 12
897
898 @cindex Example 12 (cal)
899
900 A calorimeter of copper (105 g) contain 307 g of water at 23 C. If we add 95 g of ice at -4 C, What is the final temperature of the system in Celsius? (Specific heat of ice = 2090 J/kg*K, specific heat of water = 4187 J/kg*K, specific heat of copper = 390 J/kg*K, and heat of fusion to the water = 79.7 cal/g).
901
902 @sp 2
903
904 @strong{Solution with FisicaLab}
905
906 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Calorimetry, two elements Block, two elements Liquid, one element Change of state solid-liquid and one element Process. As show the image below (yellow circle contains the elements that represent the change of the ice):
907
908 @center @image{cal-e12-1, 5cm}
909
910 To the element Block, that represent the calorimeter of copper and gonna be called @emph{Copper}, we have:
911
912 @sp 1
913
914 @table @strong
915
916 @item Name
917 Copper
918
919 @item m
920 105 @@ g
921
922 @item c
923 390
924
925 @item Ti
926 23 @@ C
927
928 @item Tf
929 Tf @@ C
930
931 @end table
932
933 @sp 1
934
935 To the element Liquid, that represent the water into the calorimeter and gonna be called @emph{Water}, we have:
936
937 @sp 1
938
939 @table @strong
940
941 @item Name
942 Water
943
944 @item m
945 307 @@ g
946
947 @item c
948 4187
949
950 @item Ti
951 23 @@ C
952
953 @item Tf
954 Tf @@ C
955
956 @end table
957
958 @sp 1
959
960 Now, let's assume that the ice melts completely and that the resulting liquid reaches a higher temperature at 0 C. Then to the second element Block, representing the ice in the temperature range of -4 C to 0 C and gonna be called @emph{IceA}, we have:
961
962 @sp 1
963
964 @table @strong
965
966 @item Name
967 IceA
968
969 @item m
970 95 @@ g
971
972 @item c
973 2090
974
975 @item Ti
976 -4 @@ C
977
978 @item Tf
979 0 @@ C
980
981 @end table
982
983 @sp 1
984
985 Now to the element Change of state solid-liquid, representing the melting of ice and gonna be called @emph{IceB}, we have:
986
987 @sp 1
988
989 @table @strong
990
991 @item Name
992 IceB
993
994 @item m
995 95 @@ g
996
997 @item cf
998 79.7 @@ cal/g
999
1000 @item Sense
1001 >
1002
1003 @end table
1004
1005 @sp 1
1006
1007 And to the second element Liquid, representing liquid water obtained by melting ice and gonna be called @emph{IceC}, we have:
1008
1009 @sp 1
1010
1011 @table @strong
1012
1013 @item Name
1014 IceC
1015
1016 @item m
1017 95 @@ g
1018
1019 @item c
1020 4187
1021
1022 @item Ti
1023 0 @@ C
1024
1025 @item Tf
1026 Tf @@ C
1027
1028 @end table
1029
1030 @sp 1
1031
1032 Now to the element Process, which represents the total change suffered by the ice water and gonna be called @emph{Ice}, we have:
1033
1034 @sp 1
1035
1036 @table @strong
1037
1038 @item Name
1039 Ice
1040
1041 @item Object 1
1042 IceA
1043
1044 @item Object 2
1045 IceB
1046
1047 @item Object 3
1048 IceC
1049
1050 @item Object 4
1051 0
1052
1053 @item Object 5
1054 0
1055
1056 @end table
1057
1058 @sp 1
1059
1060 Note that the unknown data of the final temperature is the same in all elements, as must be. Therefore, to the element Calorimeter:
1061
1062 @sp 1
1063
1064 @table @strong
1065
1066 @item Object 1
1067 Copper
1068
1069 @item Object 2
1070 Water
1071
1072 @item Object 3
1073 Ice
1074
1075 @item Object 4
1076 0
1077
1078 @end table
1079
1080 @sp 1
1081
1082 Now click in the icon Solve to get the answer:
1083
1084 @example
1085
1086 Tf = -1.154 C ;
1087 Status = success.
1088
1089 Verify that the calculated temperature is within the
1090 range expected. Otherwise, some process or change never
1091 takes place because the energy isn't enough.
1092
1093 @end example
1094
1095 The warning message tells us that we must verify that the final temperature is within the expected range. Obviously the obtained final temperature is not within the expected range, since we assume that the ice has completely melted and the resulting liquid water took on a final temperature above 0 C. This suggests (as tells us the warning message) that some process is not carried out. The immediate possibility is that the energy of the calorimeter and water, is not enough to melt all the ice. So let's assume that the ice reaches the 0 C, but only part of it melts. Thus removing the element Liquid, which represents the resulting water ice, and also delete its name from the element Process. Then the final temperature isn't an unknown data, because if only part of the ice melts, then the final temperature is 0 C. The new unknown data is the mass of ice that melts. Thus, with this new hypothesis the elements to the problem are as shown the image below:
1096
1097 @center @image{cal-e12-2, 4cm}
1098
1099 We must delete the element @emph{IceC} in the element Process:
1100
1101 @sp 1
1102
1103 @table @strong
1104
1105 @item Name
1106 Ice
1107
1108 @item Object 1
1109 IceA
1110
1111 @item Object 2
1112 IceB
1113
1114 @item Object 3
1115 0
1116
1117 @item Object 4
1118 0
1119
1120 @item Object 5
1121 0
1122
1123 @end table
1124
1125 @sp 1
1126
1127 In the element Change of state solid-liquid, the mass is now the unknown data (we add the conversion factor to grams):
1128
1129 @sp 1
1130
1131 @table @strong
1132
1133 @item Name
1134 IceB
1135
1136 @item m
1137 m @@ g
1138
1139 @item cf
1140 79.7 @@ cal/g
1141
1142 @item Sense
1143 >
1144
1145 @end table
1146
1147 @sp 1
1148
1149 In the elements that represent the copper and its water, the final temperature is now 0 C:
1150
1151 @sp 1
1152
1153 @table @strong
1154
1155 @item Name
1156 Copper
1157
1158 @item m
1159 105 @@ g
1160
1161 @item c
1162 390
1163
1164 @item Ti
1165 23 @@ C
1166
1167 @item Tf
1168 0 @@ C
1169
1170 @end table
1171
1172 @sp 2
1173
1174 @table @strong
1175
1176 @item Name
1177 Water
1178
1179 @item m
1180 307 @@ g
1181
1182 @item c
1183 4187
1184
1185 @item Ti
1186 23 @@ C
1187
1188 @item Tf
1189 0 @@ C
1190
1191 @end table
1192
1193 @sp 1
1194
1195 Now click in the icon Solve to get the answer:
1196
1197 @example
1198
1199 m = 89.037 g ;
1200 Status = success.
1201
1202 @end example
1203
1204 Therefor, the final temperature is 0 C, with only 89 g of melting ice.
1205
1206 @page
1207
1208
1209 @node Example 13 (cal), , Example 12 (cal), Examples calorimetry
1210 @section Example 13
1211
1212 @cindex Example 13 (cal)
1213
1214 One type of oil (specific heat 0.51 cal/g*K) is cooled in a heat exchanger. If the oil, with a flow of 3 L/min, enters to the heat exchanger at 72 C and exits with a temperature of 27 C, What is the flow of the water, used as refrigerant (specific heat 4187 J/kg*K), if this enters with a temperature of 20 C and exits with a temperature of 63 C? Give your answer on L/min.
1215
1216 @sp 2
1217
1218 @strong{Solution with FisicaLab}
1219
1220 Select the Thermodynamics group and, inside this, the Calorimetry and gases module. Erase the content of the chalkboard. And add one element Heat exchanger, as show the image below:
1221
1222 @center @image{cal-e13, 3cm}
1223
1224 To this element:
1225
1226 @sp 1
1227
1228 @table @strong
1229
1230 @item TRi
1231 20 @@ C
1232
1233 @item TRf
1234 63 @@ C
1235
1236 @item dR/dt
1237 Q @@ L/min
1238
1239 @item cR
1240 4187
1241
1242 @item TFi
1243 72 @@ C
1244
1245 @item TFf
1246 27 @@ C
1247
1248 @item dF/dt
1249 3 @@ L/min
1250
1251 @item cF
1252 0.51 @@ cal/g*K
1253
1254 @end table
1255
1256 @sp 1
1257
1258 Now click in the icon Solve to get the answer:
1259
1260 @example
1261
1262 Q = 1.601 L/min ;
1263 Status = success.
1264
1265 @end example