Debian Codegraph @

translations/manual/ko/regexp_quick_reference.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
5 #
6 # Translators:
7 # Snowcat8436 <[email protected]>, 2018
8 # Junghee Lee <[email protected]>, 2026
9 #
10 #, fuzzy
11 msgid ""
12 msgstr ""
13 "Project-Id-Version: calibre 9.6.100\n"
14 "Report-Msgid-Bugs-To: \n"
15 "POT-Creation-Date: 2026-04-08 13:52+0000\n"
16 "PO-Revision-Date: 2017-12-15 03:02+0000\n"
17 "Last-Translator: Junghee Lee <[email protected]>, 2026\n"
18 "Language-Team: Korean (https://app.transifex.com/calibre/teams/19337/ko/)\n"
19 "MIME-Version: 1.0\n"
20 "Content-Type: text/plain; charset=UTF-8\n"
21 "Content-Transfer-Encoding: 8bit\n"
22 "Language: ko\n"
23 "Plural-Forms: nplurals=1; plural=0;\n"
24
25 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:2
26 msgid "Quick reference for regexp syntax"
27 msgstr "정규 표현식 구문 빠른 참조"
28
29 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:4
30 msgid ""
31 "This checklist summarizes the most commonly used/hard to remember parts of "
32 "the regexp engine available in most parts of calibre."
33 msgstr ""
34 "이 체크리스트는 calibre의 대부분에서 사용 가능한 정규 표현식 엔진에서 가장 많이 사용되거나 기억하기 어려운 부분을 요약합니다."
35
36 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:10
37 msgid "Contents"
38 msgstr "목차"
39
40 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:13
41 msgid "Character classes"
42 msgstr "문자 클래스"
43
44 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:15
45 msgid ""
46 "Character classes are useful to represent different groups of characters, "
47 "succinctly."
48 msgstr "문자 클래스는 다양한 문자 그룹을 간결하게 표현하는 데 유용합니다."
49
50 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:18
51 msgid "Examples:"
52 msgstr "예시:"
53
54 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:21
55 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:52
56 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:241
57 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:271
58 msgid "**Representation**"
59 msgstr "**표현**"
60
61 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:21
62 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:52
63 msgid "**Class**"
64 msgstr "**클래스**"
65
66 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:24
67 msgid "``[a-z]``"
68 msgstr "``[a-z]``"
69
70 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:24
71 msgid ""
72 "Lowercase letters. Does not include characters with accent mark and "
73 "ligatures"
74 msgstr "소문자. 악센트 기호와 합자가 포함되지 않음"
75
76 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:27
77 msgid "``[a-z0-9]``"
78 msgstr "``[a-z0-9]``"
79
80 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:27
81 msgid "Lowercase letters from a to z or numbers from 0 to 9"
82 msgstr "a부터 z까지의 소문자 또는 0부터 9까지의 숫자"
83
84 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:29
85 msgid "``[A-Za-z-]``"
86 msgstr "``[A-Za-z-]``"
87
88 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:29
89 msgid ""
90 "Uppercase or lowercase letters, or a dash. To include the dash in a class, "
91 "you must put it at the beginning or at the end so as not to confuse it with "
92 "the hyphen that specifies a range of characters"
93 msgstr ""
94 "대문자 또는 소문자, 또는 대시. 클래스에 대시를 포함하려면 문자 범위를 지정하는 하이픈과 혼동되지 않도록 처음이나 끝에 놓아야 합니다"
95
96 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:33
97 msgid "``[^0-9]``"
98 msgstr "``[^0-9]``"
99
100 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:33
101 msgid ""
102 "Any character except a digit. The caret (^) placed at the beginning of the "
103 "class excludes the characters of the class (complemented class)"
104 msgstr "숫자를 제외한 모든 문자. 클래스 시작 부분에 놓인 캐럿(^)은 해당 클래스의 문자를 제외합니다 (보수 클래스)"
105
106 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:36
107 msgid "``[[a-z]--[aeiouy]]``"
108 msgstr "``[[a-z]--[aeiouy]]``"
109
110 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:36
111 msgid ""
112 "The lowercase consonants. A class can be included in a class. The characters"
113 " ``--`` exclude what follows them"
114 msgstr "소문자 자음. 클래스 안에 클래스를 포함할 수 있습니다. ``--`` 문자는 뒤에 오는 것을 제외합니다"
115
116 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:39
117 msgid "``[\\w--[\\d_]]``"
118 msgstr "``[\\w--[\\d_]]``"
119
120 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:39
121 msgid ""
122 "All letters (including foreign accented characters). Abbreviated classes can"
123 " be used inside a class"
124 msgstr "모든 문자 (외국어 악센트 문자 포함). 약어 클래스는 클래스 안에서 사용할 수 있습니다"
125
126 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:44
127 msgid "Example::"
128 msgstr "예시::"
129
130 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:49
131 msgid "Shorthand character classes"
132 msgstr "약어 문자 클래스"
133
134 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:55
135 msgid "``\\d``"
136 msgstr "``\\d``"
137
138 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:55
139 msgid "A digit (same as ``[0-9]``)"
140 msgstr "숫자 (``[0-9]``와 동일)"
141
142 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:57
143 msgid "``\\D``"
144 msgstr "``\\D``"
145
146 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:57
147 msgid "Any non-numeric character (same as ``[^0-9]``)"
148 msgstr "숫자가 아닌 모든 문자 (``[^0-9]``와 동일)"
149
150 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:59
151 msgid "``\\w``"
152 msgstr "``\\w``"
153
154 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:59
155 msgid ""
156 "An alphanumeric character (``[a-zA-Z0-9]``) including characters with accent"
157 " mark and ligatures"
158 msgstr "악센트 기호와 합자가 포함된 영숫자 문자 (``[a-zA-Z0-9]``)"
159
160 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:62
161 msgid "``\\W``"
162 msgstr "``\\W``"
163
164 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:62
165 msgid "Any “non-word” character"
166 msgstr "“단어가 아닌” 모든 문자"
167
168 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:64
169 msgid "``\\s``"
170 msgstr "``\\s``"
171
172 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:64
173 msgid "Space, non-breaking space, tab, carriage return"
174 msgstr "공백, 줄바꿈 없는 공백, 탭, 캐리지 리턴"
175
176 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:66
177 msgid "``\\S``"
178 msgstr "``\\S``"
179
180 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:66
181 msgid "Any “non-whitespace” character"
182 msgstr "“공백이 아닌” 모든 문자"
183
184 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:68
185 msgid "``.``"
186 msgstr "``.``"
187
188 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:68
189 msgid ""
190 "Any character except newline. Use the “dot all” checkbox or the ``(?s)`` "
191 "regexp modifier to include the newline character."
192 msgstr ""
193 "줄바꿈을 제외한 모든 문자. 줄바꿈 문자를 포함하려면 “dot all” 체크박스를 사용하거나 ``(?s)`` 정규식 수정자를 "
194 "사용하십시오."
195
196 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:73
197 msgid "The quantifiers"
198 msgstr "한정자"
199
200 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:76
201 msgid "**Quantifier**"
202 msgstr "**한정자**"
203
204 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:76
205 msgid "**Number of occurrences of the expression preceding the quantifier**"
206 msgstr "**한정자 앞의 표현식 출현 횟수**"
207
208 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:79
209 msgid "``?``"
210 msgstr "``?``"
211
212 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:79
213 msgid "0 or 1 occurrence of the expression. Same as ``{0,1}``"
214 msgstr "표현식의 0 또는 1회 출현. ``{0,1}``과 동일"
215
216 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:81
217 msgid "``+``"
218 msgstr "``+``"
219
220 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:81
221 msgid "1 or more occurrences of the expression. Same as ``{1,}``"
222 msgstr "표현식의 1회 이상 출현. ``{1,}``과 동일"
223
224 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:83
225 msgid "``*``"
226 msgstr "``*``"
227
228 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:83
229 msgid "0, 1 or more occurrences of the expression. Same as ``{0,}``"
230 msgstr "표현식의 0, 1 또는 그 이상 출현. ``{0,}``과 동일"
231
232 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:85
233 msgid "``{n}``"
234 msgstr "``{n}``"
235
236 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:85
237 msgid "Exactly n occurrences of the expression"
238 msgstr "표현식의 정확히 n회 출현"
239
240 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:87
241 msgid "``{min,max}``"
242 msgstr "``{min,max}``"
243
244 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:87
245 msgid "Number of occurrences between the minimum and maximum values included"
246 msgstr "최소값과 최대값(포함) 사이의 출현 횟수"
247
248 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:89
249 msgid "``{min,}``"
250 msgstr "``{min,}``"
251
252 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:89
253 msgid "Number of occurrences between the minimum value included and infinity"
254 msgstr "최소값(포함)과 무한대 사이의 출현 횟수"
255
256 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:91
257 msgid "``{,max}``"
258 msgstr "``{,max}``"
259
260 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:91
261 msgid "Number of occurrences between 0 and the maximum value included"
262 msgstr "0과 최대값(포함) 사이의 출현 횟수"
263
264 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:97
265 msgid "Greed"
266 msgstr "탐욕"
267
268 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:99
269 msgid ""
270 "By default, with quantifiers, the regular expression engine is greedy: it "
271 "extends the selection as much as possible. This often causes surprises, at "
272 "first. ``?`` follows a quantifier to make it lazy. Avoid putting two in the "
273 "same expression, the result can be unpredictable."
274 msgstr ""
275 "기본적으로 한정자와 함께 사용하면 정규 표현식 엔진은 탐욕(greedy) 모드로 작동하여 선택을 가능한 한 많이 확장합니다. 이는 "
276 "처음에는 종종 당황스러운 결과를 초래합니다. 한정자 뒤에 ``?``를 붙이면 게으른(lazy) 모드가 됩니다. 같은 표현식에 두 개를 "
277 "넣지 마세요. 결과를 예측할 수 없습니다."
278
279 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:104
280 msgid ""
281 "Beware of nesting quantifiers, for example, the pattern ``(a*)*``, as it "
282 "exponentially increases processing time."
283 msgstr "한정자를 중첩하는 것은 주의하세요. 예를 들어 ``(a*)*`` 패턴은 처리 시간을 기하급수적으로 증가시킵니다."
284
285 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:108
286 msgid "Alternation"
287 msgstr "대안"
288
289 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:110
290 msgid ""
291 "The ``|`` character in a regular expression is a logical ``OR``. It means "
292 "that either the preceding or the following expression can match."
293 msgstr ""
294 "정규 표현식에서 ``|`` 문자는 논리적 ``OR``입니다. 앞의 표현식이나 뒤의 표현식 중 하나가 일치할 수 있음을 의미합니다."
295
296 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:114
297 msgid "Exclusion"
298 msgstr "제외"
299
300 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:116
301 msgid "Method 1"
302 msgstr "방법 1"
303
304 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:118
305 msgid "``pattern_to_exclude(*SKIP)(*FAIL)|pattern_to_select``"
306 msgstr "``제외할_패턴(*SKIP)(*FAIL)|선택할_패턴``"
307
308 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:120
309 msgid "Example:"
310 msgstr "예시:"
311
312 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:122
313 msgid "``\"Blabla\"(*SKIP)(*FAIL)|Blabla``"
314 msgstr "``\"Blabla\"(*SKIP)(*FAIL)|Blabla``"
315
316 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:124
317 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:132
318 msgid ""
319 "selects Blabla, in the strings Blabla or \"Blabla or Blabla\", but not in "
320 "\"Blabla\"."
321 msgstr "Blabla 또는 \"Blabla 또는 Blabla\" 문자열에서는 Blabla를 선택하지만, \"Blabla\"에서는 선택하지 않습니다."
322
323 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:126
324 msgid "Method 2"
325 msgstr "방법 2"
326
327 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:128
328 msgid "``pattern_to_exclude\\K|(pattern_to_select)``"
329 msgstr "``제외할_패턴\\K|(선택할_패턴)``"
330
331 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:130
332 msgid "``\"Blabla\"\\K|(Blabla)``"
333 msgstr "``\"Blabla\"\\K|(Blabla)``"
334
335 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:135
336 msgid "Anchors"
337 msgstr "앵커"
338
339 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:137
340 msgid ""
341 "An anchor is a way to match a logical location in a string, rather than a "
342 "character. The most useful anchors for text processing are:"
343 msgstr "앵커는 문자가 아닌 문자열의 논리적 위치를 일치시키는 방법입니다. 텍스트 처리에 가장 유용한 앵커는 다음과 같습니다:"
344
345 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:140
346 msgid "``\\b``"
347 msgstr "``\\b``"
348
349 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:141
350 msgid ""
351 "Designates a word boundary, i.e. a transition from space to non-space "
352 "character. For example, you can use ``\\bsurd`` to match ``the surd`` but "
353 "not ``absurd``."
354 msgstr ""
355 "단어 경계, 즉 공백에서 비공백 문자로의 전환을 나타냅니다. 예를 들어 ``\\bsurd``를 사용하면 ``the surd``는 "
356 "일치하지만 ``absurd``는 일치하지 않습니다."
357
358 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:145
359 msgid "``^``"
360 msgstr "``^``"
361
362 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:146
363 msgid "Matches the start of a line (in multi-line mode, which is the default)"
364 msgstr "줄의 시작과 일치합니다 (기본값인 다중 줄 모드에서)"
365
366 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:149
367 msgid "``$``"
368 msgstr "``$``"
369
370 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:150
371 msgid "Matches the end of a line (in multi-line mode, which is the default)"
372 msgstr "줄의 끝과 일치합니다 (기본값인 다중 줄 모드에서)"
373
374 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:152
375 msgid "``\\K``"
376 msgstr "``\\K``"
377
378 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:153
379 msgid ""
380 "Resets the start position of the selection to its position in the pattern. "
381 "Some regexp engines (but not calibre) do not allow lookbehind of variable "
382 "length, especially with quantifiers. When you can use ``\\K`` with these "
383 "engines, it also allows you to get rid of this limit by writing the "
384 "equivalent of a positive lookbehind of variable length."
385 msgstr ""
386 "선택의 시작 위치를 패턴 내의 해당 위치로 재설정합니다. 일부 정규 표현식 엔진(calibre는 해당하지 않음)은 특히 한정자와 함께 "
387 "사용할 때 가변 길이의 룩비하인드를 허용하지 않습니다. 이러한 엔진에서 ``\\K``를 사용할 수 있다면 가변 길이의 긍정적 룩비하인드와"
388 " 동등하게 작성하여 이 제한을 없앨 수도 있습니다."
389
390 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:160
391 msgid "Groups"
392 msgstr "그룹"
393
394 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:162
395 msgid "``(expression)``"
396 msgstr "``(표현식)``"
397
398 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:163
399 msgid ""
400 "Capturing group, which stores the selection and can be recalled later in the"
401 " *search* or *replace* patterns with ``\\n``, where ``n`` is the sequence "
402 "number of the capturing group (starting at 1 in reading order)"
403 msgstr ""
404 "캡처 그룹은 선택을 저장하며, 나중에 *검색* 또는 *바꾸기* 패턴에서 ``\\n``으로 참조할 수 있습니다. 여기서 ``n``은 캡처 "
405 "그룹의 순서 번호입니다 (읽기 순서에서 1부터 시작)"
406
407 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:167
408 msgid "``(?:expression)``"
409 msgstr "``(?:표현식)``"
410
411 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:168
412 msgid "Group that does not capture the selection"
413 msgstr "선택을 캡처하지 않는 그룹"
414
415 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:170
416 msgid "``(?>expression)``"
417 msgstr "``(?>표현식)``"
418
419 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:171
420 msgid ""
421 "Atomic Group: As soon as the expression is satisfied, the regexp engine "
422 "passes, and if the rest of the pattern fails, it will not backtrack to try "
423 "other combinations with the expression. Atomic groups do not capture."
424 msgstr ""
425 "원자적 그룹: 표현식이 만족되는 즉시 정규 표현식 엔진이 통과하며, 나머지 패턴이 실패하면 해당 표현식으로 다른 조합을 시도하기 위해 "
426 "백트래킹하지 않습니다. 원자적 그룹은 캡처하지 않습니다."
427
428 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:176
429 msgid "``(?|expression)``"
430 msgstr "``(?|표현식)``"
431
432 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:177
433 msgid ""
434 "Branch reset group: the branches of the alternations included in the "
435 "expression share the same group numbers"
436 msgstr "분기 재설정 그룹: 표현식에 포함된 대안의 분기가 동일한 그룹 번호를 공유합니다"
437
438 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:180
439 msgid "``(?<name>expression)``"
440 msgstr "``(?<이름>표현식)``"
441
442 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:181
443 msgid ""
444 "Group named “name”. The selection can be recalled later in the *search* "
445 "pattern by ``(?P=name)`` and in the *replace* by ``\\g<name>``. Two "
446 "different groups can use the same name."
447 msgstr ""
448 "“name”이라는 이름의 그룹. 선택한 항목은 나중에 *search* 패턴에서 ``(?P=name)`` 으로, "
449 "*replace*에서 ``\\g<name>``으로 다시 불러올 수 있습니다. 두 개의 서로 다른 그룹이 동일한 이름을 사용할 수 "
450 "있습니다."
451
452 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:187
453 msgid "Lookarounds"
454 msgstr "룩어라운드"
455
456 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:190
457 msgid "**Lookaround**"
458 msgstr "**룩어라운드**"
459
460 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:190
461 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:241
462 msgid "**Meaning**"
463 msgstr "**의미**"
464
465 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:193
466 msgid "``?=``"
467 msgstr "``?=``"
468
469 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:193
470 msgid "Positive lookahead (to be placed after the selection)"
471 msgstr "긍정적 룩어헤드 (선택 뒤에 놓음)"
472
473 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:196
474 msgid "``?!``"
475 msgstr "``?!``"
476
477 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:196
478 msgid "Negative lookahead (to be placed after the selection)"
479 msgstr "부정적 룩어헤드 (선택 뒤에 놓음)"
480
481 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:199
482 msgid "``?<=``"
483 msgstr "``?<=``"
484
485 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:199
486 msgid "Positive lookbehind (to be placed before the selection)"
487 msgstr "긍정적 룩비하인드 (선택 앞에 놓음)"
488
489 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:202
490 msgid "``?<!``"
491 msgstr "``?<!``"
492
493 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:202
494 msgid "Negative lookbehind (to be placed before the selection)"
495 msgstr "부정적 룩비하인드 (선택 앞에 놓음)"
496
497 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:206
498 msgid ""
499 "Lookaheads and lookbehinds do not consume characters, they are zero length "
500 "and do not capture. They are atomic groups: as soon as the assertion is "
501 "satisfied, the regexp engine passes, and if the rest of the pattern fails, "
502 "it will not backtrack inside the lookaround to try other combinations."
503 msgstr ""
504 "룩어헤드와 룩비하인드는 문자를 소비하지 않으며, 길이가 0이고 캡처하지 않습니다.它们是 원자적 그룹입니다: 어서션이 만족되는 즉시 정규 "
505 "표현식 엔진이 통과하며, 나머지 패턴이 실패하면 룩어라운드 내에서 다른 조합을 시도하기 위해 백트래킹하지 않습니다."
506
507 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:211
508 msgid ""
509 "When looking for multiple matches in a string, at the starting position of "
510 "each match attempt, a lookbehind can inspect the characters before the "
511 "current position. Therefore, on the string 123, the pattern ``(?<=\\d)\\d`` "
512 "(a digit preceded by a digit) should, in theory, select 2 and 3. On the "
513 "other hand, ``\\d\\K\\d`` can only select 2, because the starting position "
514 "after the first selection is immediately before 3, and there are not enough "
515 "digits for a second match. Similarly, ``\\d(\\d)`` only captures 2. In "
516 "calibre's regexp engine practice, the positive lookbehind behaves in the "
517 "same way, and selects only 2, contrary to theory."
518 msgstr ""
519 "문자열에서 여러 일치 항목을 찾을 때, 각 일치 시도의 시작 위치에서 룩비하인드는 현재 위치 이전의 문자를 검사할 수 있습니다. 따라서 "
520 "문자열 123에서 패턴 ``(?<=\\d)\\d`` (숫자 뒤에 오는 숫자)는 이론적으로 2와 3을 선택해야 합니다. 반면에 "
521 "``\\d\\K\\d``는 첫 번째 선택 후 시작 위치가 3 바로 앞이므로 2만 선택할 수 있으며, 두 번째 일치를 위한 충분한 숫자가 "
522 "없습니다. 마찬가지로 ``\\d(\\d)``는 2만 캡처합니다. calibre의 정규 표현식 엔진에서는 긍정적 룩비하인드가 이론과 달리 "
523 "동일한 방식으로 작동하여 2만 선택합니다."
524
525 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:221
526 msgid ""
527 "Groups can be placed inside lookarounds, but capture is rarely useful. "
528 "Nevertheless, if it is useful, it will be necessary to be very careful in "
529 "the use of a quantifier in a lookbehind: the greed associated with the "
530 "absence of backtracking can give a surprising capture. For this reason, use "
531 "``\\K`` rather than a positive lookbehind when you have a quantifier (or "
532 "worse, several) in a capturing group of the positive lookbehind."
533 msgstr ""
534 "그룹을 룩어라운드 안에 넣을 수 있지만, 캡처는 거의 유용하지 않습니다. 그럼에도 불구하고 유용한 경우, 룩비하인드에서 한정자를 사용할 "
535 "때 매우 주의해야 합니다: 백트래킹의 부재와 관련된 탐욕은 예상치 못한 캡처를 초래할 수 있습니다. 이러한 이유로 긍정적 룩비하인드의 "
536 "캡처 그룹에 한정자(또는 더 나쁜 경우 여러 개)가 있을 때는 긍정적 룩비하인드 대신 ``\\K``를 사용하세요."
537
538 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:228
539 msgid "Example of negative lookahead:"
540 msgstr "부정적 룩어헤드 예시:"
541
542 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:230
543 msgid "``(?![^<>{}]*[>}])``"
544 msgstr "``(?![^<>{}]*[>}])``"
545
546 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:232
547 msgid ""
548 "Placed at the end of the pattern prevents selecting within a tag or a style "
549 "embedded in the file."
550 msgstr "패턴 끝에 놓으면 파일에 임베디드된 태그나 스타일 안에서 선택하는 것을 방지합니다."
551
552 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:234
553 msgid ""
554 "Whenever possible, it is always better to \"anchor\" the lookarounds, to "
555 "reduce the number of steps necessary to obtain the result."
556 msgstr "가능하면 항상 룩어라운드를 \"앵커링\"하여 결과를 얻기 위해 필요한 단계 수를 줄이는 것이 좋습니다."
557
558 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:238
559 msgid "Recursion"
560 msgstr "재귀"
561
562 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:244
563 msgid "``(?R)``"
564 msgstr "``(?R)``"
565
566 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:244
567 msgid "Recursion of the entire pattern"
568 msgstr "전체 패턴의 재귀"
569
570 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:247
571 msgid "``(?1)``"
572 msgstr "``(?1)``"
573
574 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:247
575 msgid ""
576 "Recursion of the only pattern of the numbered capturing group, here group 1"
577 msgstr "번호가 매겨진 캡처 그룹(여기서는 그룹 1)의 패턴만 재귀"
578
579 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:251
580 msgid ""
581 "Recursion is calling oneself. This is useful for balanced queries, such as "
582 "quoted strings, which can contain embedded quoted strings. Thus, if during "
583 "the processing of a string between double quotation marks, we encounter the "
584 "beginning of a new string between double quotation marks, well we know how "
585 "to do, and we call ourselves. Then we have a pattern like::"
586 msgstr ""
587 "재귀는 자기 자신을 호출하는 것입니다. 이는 중첩된 따옴표 문자열을 포함할 수 있는 따옴표 문자열 같은 균형 잡힌 쿼리에 유용합니다. "
588 "따라서 큰따옴표 사이의 문자열을 처리하는 동안 새로운 큰따옴표 문자열의 시작을 만나면, 어떻게 해야 하는지 알고 있으므로 자기 자신을 "
589 "호출합니다. 그러면 다음과 같은 패턴을 갖게 됩니다::"
590
591 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:259
592 msgid ""
593 "To select a string between double quotation marks without stopping on an "
594 "embedded string::"
595 msgstr "중첩된 문자열에서 멈추지 않고 큰따옴표 사이의 문자열을 선택하려면::"
596
597 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:263
598 msgid ""
599 "This template can also be used to modify pairs of tags that can be embedded,"
600 " such as ``<div>`` tags."
601 msgstr "이 템플릿은 ``<div>`` 태그처럼 중첩될 수 있는 태그 쌍을 수정하는 데도 사용할 수 있습니다."
602
603 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:268
604 msgid "Special characters"
605 msgstr "특수 문자"
606
607 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:271
608 msgid "**Character**"
609 msgstr "**문자**"
610
611 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:274
612 msgid "``\\t``"
613 msgstr "``\\t``"
614
615 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:274
616 msgid "tabulation"
617 msgstr "탭"
618
619 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:277
620 msgid "``\\n``"
621 msgstr "``\\n``"
622
623 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:277
624 msgid "line break"
625 msgstr "줄바꿈"
626
627 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:280
628 msgid "``\\x20``"
629 msgstr "``\\x20``"
630
631 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:280
632 msgid "(breakable) space"
633 msgstr "(끊어질 수 있는) 공백"
634
635 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:283
636 msgid "``\\xa0``"
637 msgstr "``\\xa0``"
638
639 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:283
640 msgid "no-break space"
641 msgstr "줄바꿈 없는 공백"
642
643 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:288
644 msgid "Meta-characters"
645 msgstr "메타 문자"
646
647 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:290
648 msgid ""
649 "Meta-characters are those that have a special meaning for the regexp engine."
650 " Of these, twelve must be preceded by an escape character, the backslash "
651 "(``\\``), to lose their special meaning and become a regular character "
652 "again::"
653 msgstr ""
654 "메타 문자는 정규 표현식 엔진에 특별한 의미를 갖는 문자입니다. 이 중 12개는 이스케이프 문자인 백슬래시(``\\``)를 앞에 붙여야 "
655 "특별한 의미를 잃고 일반 문자가 됩니다::"
656
657 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:296
658 msgid ""
659 "Seven other meta-characters do not need to be preceded by a backslash (but "
660 "can be without any other consequence)::"
661 msgstr "또 다른 7개의 메타 문자는 백슬래시를 앞에 붙일 필요가 없습니다 (다른 결과 없이 붙일 수도 있습니다)::"
662
663 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:302
664 msgid ""
665 "Special characters lose their status if they are used inside a class "
666 "(between brackets ``[]``). The closing bracket and the dash have a special "
667 "status in a class. Outside the class, the dash is a simple literal, the "
668 "closing bracket remains a meta-character."
669 msgstr ""
670 "특수 문자는 클래스 안(괄호 ``[]`` 사이)에서 사용하면 특수 문자 지위를 잃습니다. 닫는 괄호와 대시는 클래스 안에서 특수한 지위를"
671 " 가집니다. 클래스 밖에서 대시는 단순 리터럴이고, 닫는 괄호는 메타 문자로 유지됩니다."
672
673 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:307
674 msgid ""
675 "The slash (/) and the number sign (or hash character) (#) are not meta-"
676 "characters, they don’t need to be escaped."
677 msgstr "슬래시(/)와 우물 정자(또는 해시 문자)(#)는 메타 문자가 아니므로 이스케이프할 필요가 없습니다."
678
679 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:310
680 msgid ""
681 "In some tools, like regex101.com with the Python engine, double quotes have "
682 "the special status of separator, and must be escaped, or the options "
683 "changed. This is not the case in the editor of calibre."
684 msgstr ""
685 "Python 엔진을 사용하는 regex101.com 같은 일부 도구에서는 큰따옴표가 구분자로서 특별한 지위를 가지며, 이스케이프하거나 "
686 "옵션을 변경해야 합니다. calibre의 편집기에서는 그렇지 않습니다."
687
688 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:315
689 msgid "Modes"
690 msgstr "모드"
691
692 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:317
693 msgid "``(?s)``"
694 msgstr "``(?s)``"
695
696 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:318
697 msgid "Causes the dot (``.``) to match newline characters as well"
698 msgstr "점(``.``)이 줄바꿈 문자도 일치하도록 합니다"
699
700 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:320
701 msgid "``(?m)``"
702 msgstr "``(?m)``"
703
704 #: ../../../__w/calibre/calibre/manual/regexp_quick_reference.rst:321
705 msgid ""
706 "Makes the ``^`` and ``$`` anchors match the start and end of lines instead "
707 "of the start and end of the entire string."
708 msgstr "``^``와 ``$`` 앵커가 전체 문자열의 시작과 끝이 아닌 줄의 시작과 끝을 일치하도록 합니다."