Debian Codegraph @

texmf-dist/fonts/source/public/wsuipa/wbxipa9.mf

raw
1 % Please see the file LICENCE-wsuipa.txt for licensing information.
2
3 % This is WBXIPA9.MF in text format, as of June 10, 1988.
4 % Computer Modern Bold Extended IPA 9 point
5 if unknown cmbase: input cmbase fi
6
7 font_identifier:="WBXIPA"; font_size 9pt#;
8
9 u#:=21.3/36pt#; % unit width
10 width_adj#:=10.2/36pt#; % width adjustment for certain characters
11 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
12 cap_serif_fit#:=6.2/36pt#; % extra sidebar near uppercase serifs
13 letter_fit#:=0pt#; % extra space added to all sidebars
14
15 body_height#:=243/36pt#; % height of tallest characters
16 asc_height#:=225/36pt#; % height of lowercase ascenders
17 cap_height#:=222.3/36pt#; % height of caps
18 fig_height#:=208.8/36pt#; % height of numerals
19 x_height#:=144/36pt#; % height of lowercase without ascenders
20 math_axis#:=81/36pt#; % axis of symmetry for math symbols
21 bar_height#:=76/36pt#; % height of crossbar in lowercase e
22 comma_depth#:=63/36pt#; % depth of comma below baseline
23 desc_depth#:=63/36pt#; % depth of lowercase descenders
24
25 crisp#:=0pt#; % diameter of serif corners
26 tiny#:=13/36pt#; % diameter of rounded corners
27 fine#:=10/36pt#; % diameter of sharply rounded corners
28 thin_join#:=10/36pt#; % width of extrafine details
29 hair#:=16.6/36pt#; % lowercase hairline breadth
30 stem#:=38/36pt#; % lowercase stem breadth
31 curve#:=43/36pt#; % lowercase curve breadth
32 ess#:=35/36pt#; % breadth in middle of lowercase s
33 flare#:=42/36pt#; % diameter of bulbs or breadth of terminals
34 dot_size#:=51/36pt#; % diameter of dots
35 cap_hair#:=19/36pt#; % uppercase hairline breadth
36 cap_stem#:=47/36pt#; % uppercase stem breadth
37 cap_curve#:=51/36pt#; % uppercase curve breadth
38 cap_ess#:=48/36pt#; % breadth in middle of uppercase s
39 rule_thickness#:=.57pt#; % thickness of lines in math symbols
40
41 dish#:=1/36pt#; % amount erased at top or bottom of serifs
42 bracket#:=9/36pt#; % vertical distance from serif base to tangent
43 jut#:=22/36pt#; % protrusion of lowercase serifs
44 cap_jut#:=35/36pt#; % protrusion of uppercase serifs
45 beak_jut#:=10.2/36pt#; % horizontal protrusion of beak serifs
46 beak#:=63/36pt#; % vertical protrusion of beak serifs
47 vair#:=12.5/36pt#; % vertical diameter of hairlines
48 notch_cut#:=9pt#; % maximum breadth above or below notches
49 bar#:=16/36pt#; % lowercase bar thickness
50 slab#:=16/36pt#; % serif and arm thickness
51 cap_bar#:=16/36pt#; % uppercase bar thickness
52 cap_band#:=16/36pt#; % uppercase thickness above/below lobes
53 cap_notch_cut#:=9pt#; % max breadth above/below uppercase notches
54 serif_drop#:=2.7/36pt#; % vertical drop of sloped serifs
55 stem_corr#:=1.9/36pt#; % for small refinements of stem breadth
56 vair_corr#:=1.4/36pt#; % for small refinements of hairline height
57 apex_corr#:=0pt#; % extra width at diagonal junctions
58
59 o#:=4/36pt#; % amount of overshoot for curves
60 apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
61
62 slant:=0; % tilt ratio $(\Delta x/\Delta y)$
63 fudge:=1; % factor applied to weights of heavy characters
64 math_spread:=.7; % extra openness of math symbols
65 superness:=8/11; % parameter for superellipses
66 superpull:=1/8; % extra openness inside bowls
67 beak_darkness:=.4; % fraction of triangle inside beak serifs
68 ligs:=2; % level of ligatures to be included
69
70 square_dots:=false; % should dots be square?
71 hefty:=false; % should we try hard not to be overweight?
72 serifs:=true; % should serifs and bulbs be attached?
73 monospace:=false; % should all characters have the same width?
74 variant_g:=false; % should an italic-style g be used?
75 low_asterisk:=false; % should the asterisk be centered at the axis?
76 math_fitting:=false; % should math-mode spacing be used?
77
78 % now come replacements used to set the lowercase caps
79
80 lower.u#:=16/36pt#; % unit width
81 lower.width_adj#:=0pt#; % width adjustment for certain characters
82 lower.cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs
83 lower.letter_fit#:=2.16/36pt#; % extra space added to all sidebars
84
85 lower.body_height#:=201/36pt#; % height of tallest characters
86 lower.cap_height#:=166.49/36pt#; % height of caps
87 lower.x_height#:=106/36pt#; % height of lowercase without ascenders
88 lower.bar_height#:=58.49/36pt#; % height of crossbar in lowercase e
89 lower.comma_depth#:=46.79/36pt#; % depth of comma below baseline
90
91 lower.flare#:=31/36pt#; % diameter of bulbs or breadth of terminals
92 lower.cap_hair#:=15/36pt#; % uppercase hairline breadth
93 lower.stem#:=32/36pt#; % lowercase stem breadth
94 lower.cap_stem#:=37/36pt#; % uppercase stem breadth
95 lower.cap_curve#:=42/36pt#; % uppercase curve breadth
96 lower.cap_ess#:=38/36pt#; % breadth in middle of uppercase s
97
98 lower.cap_jut#:=24.5/36pt#; % protrusion of uppercase serifs
99 lower.beak_jut#:=7/36pt#; % horizontal protrusion of beak serifs
100 lower.beak#:=46/36pt#; % vertical protrusion of beak serifs
101 lower.slab#:=13/36pt#; % serif and arm thickness
102 lower.cap_bar#:=13/36pt#; % uppercase bar thickness
103 lower.cap_band#:=13/36pt#; % uppercase thickness above/below lobes
104 lower.cap_notch_cut#:=9pt#; % m ax breadth above/below uppercase notches
105
106 lower.o#:=2.5/36pt#; % amount of overshoot for curves
107 lower.apex_o#:=2/36pt#; % amount of overshoot for diagonal junctions
108
109 lower.fudge:=1; % factor applied to weights of heavy characters
110
111 generate iparoman % switch to the driver file