| 1 |
% Please see the file LICENCE-wsuipa.txt for licensing information. |
| 2 |
|
| 3 |
% Washington State University International Phonetic Alphabet |
| 4 |
% Computer Modern Bold Extended 8 point |
| 5 |
if unknown cmbase: input cmbase fi |
| 6 |
|
| 7 |
font_identifier:="WBXIPA"; font_size 8pt#; |
| 8 |
|
| 9 |
u#:=19.6/36pt#; % unit width |
| 10 |
width_adj#:=9.4/36pt#; % width adjustment for certain characters |
| 11 |
serif_fit#:=0pt#; % extra sidebar near lowercase serifs |
| 12 |
cap_serif_fit#:=5.4/36pt#; % extra sidebar near uppercase serifs |
| 13 |
letter_fit#:=0pt#; % extra space added to all sidebars |
| 14 |
|
| 15 |
body_height#:=216/36pt#; % height of tallest characters |
| 16 |
asc_height#:=200/36pt#; % height of lowercase ascenders |
| 17 |
cap_height#:=197.6/36pt#; % height of caps |
| 18 |
fig_height#:=185.6/36pt#; % height of numerals |
| 19 |
x_height#:=128/36pt#; % height of lowercase without ascenders |
| 20 |
math_axis#:=72/36pt#; % axis of symmetry for math symbols |
| 21 |
bar_height#:=67/36pt#; % height of crossbar in lowercase e |
| 22 |
comma_depth#:=56/36pt#; % depth of comma below baseline |
| 23 |
desc_depth#:=56/36pt#; % depth of lowercase descenders |
| 24 |
|
| 25 |
crisp#:=0pt#; % diameter of serif corners |
| 26 |
tiny#:=12/36pt#; % diameter of rounded corners |
| 27 |
fine#:=10/36pt#; % diameter of sharply rounded corners |
| 28 |
thin_join#:=10/36pt#; % width of extrafine details |
| 29 |
hair#:=16.2/36pt#; % lowercase hairline breadth |
| 30 |
stem#:=35/36pt#; % lowercase stem breadth |
| 31 |
curve#:=39/36pt#; % lowercase curve breadth |
| 32 |
ess#:=32/36pt#; % breadth in middle of lowercase s |
| 33 |
flare#:=39/36pt#; % diameter of bulbs or breadth of terminals |
| 34 |
dot_size#:=46/36pt#; % diameter of dots |
| 35 |
cap_hair#:=19/36pt#; % uppercase hairline breadth |
| 36 |
cap_stem#:=43/36pt#; % uppercase stem breadth |
| 37 |
cap_curve#:=46/36pt#; % uppercase curve breadth |
| 38 |
cap_ess#:=43/36pt#; % breadth in middle of uppercase s |
| 39 |
rule_thickness#:=.54pt#; % thickness of lines in math symbols |
| 40 |
|
| 41 |
dish#:=1/36pt#; % amount erased at top or bottom of serifs |
| 42 |
bracket#:=8/36pt#; % vertical distance from serif base to tangent |
| 43 |
jut#:=19/36pt#; % protrusion of lowercase serifs |
| 44 |
cap_jut#:=31/36pt#; % protrusion of uppercase serifs |
| 45 |
beak_jut#:=9.4/36pt#; % horizontal protrusion of beak serifs |
| 46 |
beak#:=55/36pt#; % vertical protrusion of beak serifs |
| 47 |
vair#:=12/36pt#; % vertical diameter of hairlines |
| 48 |
notch_cut#:=8pt#; % maximum breadth above or below notches |
| 49 |
bar#:=15/36pt#; % lowercase bar thickness |
| 50 |
slab#:=15/36pt#; % serif and arm thickness |
| 51 |
cap_bar#:=15/36pt#; % uppercase bar thickness |
| 52 |
cap_band#:=15/36pt#; % uppercase thickness above/below lobes |
| 53 |
cap_notch_cut#:=8pt#; % max breadth above/below uppercase notches |
| 54 |
serif_drop#:=2.4/36pt#; % vertical drop of sloped serifs |
| 55 |
stem_corr#:=1.8/36pt#; % for small refinements of stem breadth |
| 56 |
vair_corr#:=1.3/36pt#; % for small refinements of hairline height |
| 57 |
apex_corr#:=0pt#; % extra width at diagonal junctions |
| 58 |
|
| 59 |
o#:=4/36pt#; % amount of overshoot for curves |
| 60 |
apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions |
| 61 |
|
| 62 |
slant:=0; % tilt ratio $(\Delta x/\Delta y)$ |
| 63 |
fudge:=1; % factor applied to weights of heavy characters |
| 64 |
math_spread:=.9; % extra openness of math symbols |
| 65 |
superness:=8/11; % parameter for superellipses |
| 66 |
superpull:=1/8; % extra openness inside bowls |
| 67 |
beak_darkness:=.4; % fraction of triangle inside beak serifs |
| 68 |
ligs:=2; % level of ligatures to be included |
| 69 |
|
| 70 |
square_dots:=false; % should dots be square? |
| 71 |
hefty:=false; % should we try hard not to be overweight? |
| 72 |
serifs:=true; % should serifs and bulbs be attached? |
| 73 |
monospace:=false; % should all characters have the same width? |
| 74 |
variant_g:=false; % should an italic-style g be used? |
| 75 |
low_asterisk:=false; % should the asterisk be centered at the axis? |
| 76 |
math_fitting:=false; % should math-mode spacing be used? |
| 77 |
|
| 78 |
|
| 79 |
% now come replacements used to set the lowercase caps |
| 80 |
|
| 81 |
lower.u#:=15.68/36pt#; % unit width |
| 82 |
lower.width_adj#:=0pt#; % width adjustment for certain characters |
| 83 |
lower.cap_serif_fit#:=4.3/36pt#; % extra sidebar near uppercase serifs |
| 84 |
lower.letter_fit#:=1.2/36pt#; % extra space added to all sidebars |
| 85 |
|
| 86 |
lower.body_height#:=159.8/36pt#; % height of tallest characters |
| 87 |
lower.cap_height#:=147.99/36pt#; % height of caps |
| 88 |
lower.x_height#:=92.7/36pt#; % height of lowercase without ascenders |
| 89 |
lower.bar_height#:=52/36pt#; % height of crossbar in lowercase e |
| 90 |
lower.comma_depth#:=41.59/36pt#; % depth of comma below baseline |
| 91 |
|
| 92 |
lower.flare#:=28/36pt#; % diameter of bulbs or breadth of terminals |
| 93 |
lower.cap_hair#:=13/36pt#; % uppercase hairline breadth |
| 94 |
lower.stem#:=29/36pt#; % lowercase stem breadth |
| 95 |
lower.cap_stem#:=34/36pt#; % uppercase stem breadth |
| 96 |
lower.cap_curve#:=37/36pt#; % uppercase curve breadth |
| 97 |
lower.cap_ess#:=34/36pt#; % breadth in middle of uppercase s |
| 98 |
|
| 99 |
lower.cap_jut#:=21/36pt#; % protrusion of uppercase serifs |
| 100 |
lower.beak_jut#:=6.5/36pt#; % horizontal protrusion of beak serifs |
| 101 |
lower.beak#:=40/36pt#; % vertical protrusion of beak serifs |
| 102 |
lower.slab#:=12/36pt#; % serif and arm thickness |
| 103 |
lower.cap_bar#:=12/36pt#; % uppercase bar thickness |
| 104 |
lower.cap_band#:=12/36pt#; % uppercase thickness above/below lobes |
| 105 |
lower.cap_notch_cut#:=8pt#; % m ax breadth above/below uppercase notches |
| 106 |
|
| 107 |
lower.o#:=2.5/36pt#; % amount of overshoot for curves |
| 108 |
lower.apex_o#:=1.5/36pt#; % amount of overshoot for diagonal junctions |
| 109 |
|
| 110 |
lower.fudge:=1; % factor applied to weights of heavy characters |
| 111 |
|
| 112 |
generate iparoman % switch to the driver file |