Debian Codegraph @

BUGS

raw
1 This file explains, usually via sample code, some bugs that exist in
2 this release of Regina. The smaller this file the better!
3 Outstanding bugs are first; fixed ones at the end of this file.
4
5 /*--------------------------------------------------------------------
6 * INTERPRET "return" does not work correctly. If a value is returned
7 * it does work correctly.
8 * Reported by: Paul G. Barnett
9 * Bug Number: 020
10 * Fixed by:
11 * Fixed in:
12 */
13 Interpret "Return"
14 Say "should not get here!"
15 Return 1
16
17 /*--------------------------------------------------------------------
18 * LINES() BIF on transient streams return 1 when really at EOF
19 * Run program below as:
20 * regina test.rex BUGS
21 * and as
22 * cat BUGS | regina test.rex
23 * Reported by: Mark Hessling
24 * Bug Number: 021
25 * Fixed by:
26 * Fixed in:
27 */
28 /* test.rex */
29 Parse Arg fn
30 numlines = 0
31 Do While(Lines(fn) > 0)
32 line = Linein(fn)
33 numlines = numlines + 1
34 End
35 Say numlines 'in file'
36
37 /*--------------------------------------------------------------------
38 * Regina appears to read complete data files into memory in some
39 * operations. More details to be specified.
40 * Reported by: ???
41 * Bug Number: 024
42 * Fixed by:
43 * Fixed in:
44 */
45
46 /*--------------------------------------------------------------------
47 * Clauses in the Interpret command are not traced correctly.
48 * Reported by: Dennis Bareis
49 * Bug Number: 025
50 * Fixed by:
51 * Fixed in:
52 */
53
54 /*--------------------------------------------------------------------
55 * TRACE R and TRACE I produce incorrect results in various
56 * circumstances.
57 * Reported by: Various
58 * Bug Number:
59 * Fixed by:
60 * Fixed in:
61 */
62
63 /*--------------------------------------------------------------------
64 * Regina is inconsistent with the ANSI standard when it comes to
65 * treatment of whitespace in various circumstances.
66 * Reported by: Dennis Baeris
67 * Bug Number: 20000505-73993
68 * Fixed by:
69 * Fixed in:
70 */
71
72 a = '0a'x
73 b = ' '
74
75 if a = b then say 'incorrect'
76 else say 'ANSI correct'
77
78 if strip(a) == strip(b) then say 'ANSI correct'
79 else say 'incorrect'
80
81 /*--------------------------------------------------------------------
82 * Regina does not trap conditions in externally called routines
83 * Reported by: Mark Hessling
84 * Bug Number:
85 * Fixed by:
86 * Fixed in:
87 */
88 /* a1.rex */
89 signal on syntax
90 call 'a2' 'an err'
91 return 0
92
93 syntax:
94 say 'syntax at' sigl
95 exit 1
96
97 /* a2.rex - must be in REGINA_MACROS */
98 parse arg aa
99 say 'in a2' aa
100 say date('x')
101 return
102
103 Should result in:
104 ----------------
105 in a2 an err
106 syntax at 3
107
108 ======================================================================
109 ============================= FIXED ==================================
110 ======================================================================
111
112 /*--------------------------------------------------------------------
113 * Subroutines cannot have leading numerics in their name.
114 * Reported by: Frank M. Ramaekers Jr.
115 * Bug Number: 001
116 * Fixed by: Mark Hessling
117 * Fixed in: 0.08e
118 */
119 Say 'starting...'
120 rc = 1000_my_proc( "value" )
121 Return
122
123 1000_my_proc: Procedure
124 Parse Arg parm .
125 Say parm
126 Return 0
127
128 /*--------------------------------------------------------------------
129 * Calling CHAROUT with the newline character, '0a'x, would result in
130 * a CR and LF being output. This only happens under DOS, OS/2 and
131 * Win32 platforms.
132 * Reported by: Dennis Bareis
133 * Bug Number: 002
134 * Fixed by: Mark Hessling
135 * Fixed in: 0.08e
136 */
137 newl = '0a'x
138 Call charout "myfile", "Line 1" || newl
139 Return
140
141 /*--------------------------------------------------------------------
142 * Line continuation character; ',' followed by CRLF in source file
143 * would give syntax error.
144 * Reported by: Florian Grosse-Coosmann
145 * Bug Number: 003
146 * Fixed by: Mark Hessling
147 * Fixed in: 0.08e
148 */
149 Say 'Hello', /* line ends in CRLF pair */
150 'world'
151 Return
152
153 /*--------------------------------------------------------------------
154 * The value of the last token parsed with PARSE contains incorrect
155 * leading space(s).
156 * Reported by: Dennis Bareis
157 * Bug Number: 004
158 * Fixed by: Florian Grosse-Coosmann
159 * Fixed in: 0.08f
160 */
161 a = 'one two three'
162 Parse Var a one two three
163 Say '<' || three || '>'
164
165 /*--------------------------------------------------------------------
166 * The value returned by CHARS BIF was incorrect especially after a
167 * LINEIN call. The result is the example following would never end.
168 * Reported by: Yuri Shemanin
169 * Bug Number: 005
170 * Fixed by: Yuri Shemanin
171 * Fixed in: 0.08f
172 */
173 f = 'junk'
174 Do While Chars(f) <> 0
175 l = Linein(f)
176 End
177
178 /*--------------------------------------------------------------------
179 * On some platforms, if operating system command redirection was
180 * done using >FIFO, and the current directory was not writeable by
181 * the user, the command would fail. The cause is that the tmpnam()
182 * C library function is broken on several compilers.
183 * Added workaround to use environment variables, TMP, TEMP or TMPDIR.
184 * Reported by: ???
185 * Bug Number: 006
186 * Fixed by: Mark Hessling
187 * Fixed in: 0.08f
188 */
189
190 /*--------------------------------------------------------------------
191 * On platforms that did not have a C library function, alloca()
192 * Regina would leak memory. This has now been fixed by inclusion
193 * of our own alloca() function if one doesn't exist.
194 * Reported by: Mark Hessling
195 * Bug Number: 007
196 * Fixed by: Mark Hessling
197 * Fixed in: 0.08f
198 */
199
200 /*--------------------------------------------------------------------
201 * A bug in the Win95/98 command processor results in any call to
202 * an operating system command ALWAYS return 0, even though the
203 * command fails.
204 * This change attempts to circumvent this bug, but it can't in all
205 * circumstances. If the operating system command called is an
206 * executable file, and there is no output/input redirection, then
207 * the return code from the executable program will be returned. Any
208 * internal COMMAND.COM command, such as COPY, will ALWAYS return 0;
209 * there is no way around this until M$ fix there COMMAND.COM.
210 * If you use JP Software's 4DOS for NT, then you will have no problems
211 * as it correctly returns the error from the internal command.
212 * Reported by: Michael Sundermann
213 * Bug Number: 008
214 * Fixed by: Michael Sundermann
215 * Fixed in: 0.08f
216 */
217
218 /*--------------------------------------------------------------------
219 * The result of the expression (0 = zero) should be 1, but Regina
220 * returns 0
221 * Reported by: Dan Hofferth
222 * Bug Number: 009
223 * Fixed by: Florian Grosse-Coosman
224 * Fixed in: 0.08f
225 */
226 zero = 0.000
227 say ( 0 = zero ) /* should say 1, but 0 */
228
229 /*--------------------------------------------------------------------
230 * A numeric variable "exposed" by a procedure and subsequently used
231 * in a loop within the procedure that exposed it, gets an erroneous
232 * value.
233 * Reported by: [email protected]
234 * Bug Number: 010
235 * Fixed by: Florian Grosse-Coosmann
236 * Fixed in: 0.08f
237 */
238 num = 0
239 Call my_proc
240 Say 'num = ' num ';should be 6'
241 Return
242
243 my_proc: Procedure Expose num
244 Say 'num = ' num ';should be 0'
245 Do 3
246 num = num + 1
247 End
248 Say 'num = ' num ';should be 3'
249 num = num + 3
250 Say 'num = ' num ';should be 6'
251 Return
252
253 /*--------------------------------------------------------------------
254 * An error with dropping variables...
255 * Reported by: Dennis Bareis
256 * Bug Number: 011
257 * Fixed by: Mark Hessling
258 * Fixed in: 0.08f
259 */
260 call SaveInfo "Fred", "FredsValue";
261 call SaveInfo "Fred", "FredsValue2";
262 call HandleUndefCommand "Fred";
263 call SaveInfo "Fred", "FredsValue3";
264 say 'Passed!!!';
265 exit(0);
266
267 HandleUndefCommand:
268 SavedAs = "Define." || arg(1);
269 say '';
270 say '0.DROPPING "' || SavedAs || '"';
271 if symbol(SavedAs) = 'VAR' then
272 drop(SavedAs)
273 return;
274 SaveInfo:
275 /*--- Check if variable previously existed ------------------------*/
276 say '';
277 say '0.SETTING - ' || arg(1) || ' to "' || arg(2) || '"';
278 SavedAs = "Define." || arg(1);
279 if symbol(SavedAs) = 'VAR' then
280 say '1.Already Existed';
281 else
282 say '1.New info';
283
284 /*--- Save info ---------------------------------------------------*/
285 ExecutingCmd = SavedAs || ' = arg(2)'
286 say '2.Executing: "' || ExecutingCmd || '"'
287 interpret ExecutingCmd;
288
289 /*--- Check variable again! ---------------------------------------*/
290 if symbol(SavedAs) = 'VAR' then
291 do
292 interpret 'ItsValue = ' || SavedAs;
293 say '3.Variable exists, value = "' || ItsValue || '"'
294 end
295 else
296 do
297 say '3.JUST SET VAR YET - Variable does not exist - WRONG!';
298 exit(1);
299 end;
300 return;
301
302 ********************
303 OUTPUT (note Define.FRED seems to exist TWICE in multiple cases):
304
305 0.SETTING - Fred to "FredsValue"
306 1.New info
307 2.Executing: "Define.Fred = arg(2)"
308 3.Variable exists, value = "FredsValue"
309
310 0.SETTING - Fred to "FredsValue2"
311 1.Already Existed
312 2.Executing: "Define.Fred = arg(2)"
313 3.Variable exists, value = "FredsValue2"
314
315 0.DROPPING "Define.Fred"
316
317 0.SETTING - Fred to "FredsValue3"
318 1.New info
319 2.Executing: "Define.Fred = arg(2)"
320 3.JUST SET VAR YET - Variable does not exist - WRONG!
321
322 ^^^^^^^^^^^^^^^^^^^^
323 Dumping variables to <stdout>
324 Variables from bin no 0
325 >>> Variable: EXECUTINGCMD Value: [Define.Fred = arg(2)]
326 Variables from bin no 107
327 >>> Stem : Define. Default: [<none>] Values:
328 Sub-bin no 161
329 >>> Tail: FRED Value: []
330 >>> Stem : DEFINE. Default: [<none>] Values:
331 Sub-bin no 161
332 >>> Tail: FRED Value: [FredsValue3]
333 Variables from bin no 109
334 >>> Variable: ITSVALUE Value: [FredsValue2]
335 Variables from bin no 175
336 >>> Variable: SIGL Value: [8]
337 Variables from bin no 231
338 >>> Variable: SAVEDAS Value: [Define.Fred]
339
340 ^^^^^^^^^^^^^^^^^^^^
341
342 /*--------------------------------------------------------------------
343 * Allow "stderr" to be used to refer to stderr in STREAM BIF.
344 * Reported by: Dennis Bareis
345 * Bug Number: 012
346 * Fixed by: Mark Hessling
347 * Fixed in: 0.08f
348 */
349 rc = Stream('stderr', 'C', 'QUERY EXISTS')
350
351 /*--------------------------------------------------------------------
352 * The internal variable SIGL gets updated prematurely.
353 * Reported by: Dennis Bareis
354 * Bug Number: 013
355 * Fixed by: Florian Grosse-Coosmann
356 * Fixed in: 0.08f
357 */
358
359 Call Alabel
360 Return
361
362 ALabel:
363 Call AnotherLabel SIGL
364 Return
365
366 AnotherLabel:
367 Parse Arg lineo
368 Say lineno
369 Return
370
371 /*--------------------------------------------------------------------
372 * A syntax error in a Rexx script passed to the RexxStart() API via
373 * the "instore" option, will exit the program, rather than return an
374 * error.
375 * Reported by: Mark Hessling
376 * Bug Number: 014
377 * Fixed by: Florian Grosse-Coosmann
378 * Fixed in: 0.08f
379 */
380
381 /*--------------------------------------------------------------------
382 * The VALUE() BIF would not set values of compound variables correctly
383 * if the variable is specified in lower case.
384 * Reported by: Jeff Parlant and Dennis Bareis
385 * Bug Number: 015
386 * Fixed by: Mark Hessling
387 * Fixed in: 0.08g
388 */
389
390 stemname = 'foo.'
391 foo.0 = 1
392 foo.1 = 'something'
393 call func
394 say foo.0
395 say foo.1
396 exit 0
397
398 func: procedure expose stemname (stemname)
399 /* trace ?i */
400 do i = 1 to value(stemname||0)
401 r = value(stemname||i,'something else')
402 end
403 return 0
404
405 /*--------------------------------------------------------------------
406 * The value of the last argument to a procedure when using the ARG() BIF
407 * has an incorrect trailing space.
408 * Reported by: Mark Hessling
409 * Bug Number: 016
410 * Fixed by: Mark Hessling
411 * Fixed in: 0.08g
412 */
413
414 Call proc '123', '456'
415 Return
416
417 proc:
418 Say '<' || arg(1) || '>' /* displays <123> */
419 Say '<' || arg(2) || '>' /* displays <456 > */
420 Return
421
422 /*--------------------------------------------------------------------
423 * INTERPRET "return Func()" does not work correctly.
424 * Reported by: Paul G. Barnett
425 * Bug Number: 017
426 * Fixed by: Mark Hessling
427 * Fixed in: 0.08g - See Bug 020
428 */
429 Interpret "Return F1()"
430 Say "should not get here!"
431 Return
432 F1: Procedure
433 Say "in F1"
434 Return 0
435
436 /*--------------------------------------------------------------------
437 * File names in Regina are always case sensitive, even on non-Unix
438 * platforms. This can result in incorrect read/write pointers when
439 * referencing a file by name with different case.
440 * Reported by: Jackie Cooper
441 * Bug Number: 018
442 * Fixed by: Mark Hessling
443 * Fixed in: 0.08g
444 */
445 myfile = 'abc'
446 myupperfile = 'ABC'
447 Call Lineout, myfile, 'Line1'
448 Call Lineout, myupperfile, 'Line2'
449 Call Lineout, myfile
450 numlines = 0
451 Do While(Lines(myfile)>0)
452 numlines = numlines + 1
453 End
454 Say 'Should be 2 lines, but got only' numlines
455 Return
456
457 /*--------------------------------------------------------------------
458 * Setting Rexx variables using VALUE BIF produce inconsistent results.
459 * Reported by: Dennis Baeris
460 * Bug Number: 019
461 * Fixed by: Mark Hessling
462 * Fixed in: 0.08h
463 */
464 call value "Upd.3", "text";
465 say 'a) Upd.3="' || Upd.3 || '"';
466 say 'b) Upd.3="' || value("Upd.3") || '"';
467 say 'c) Upd.3="' || value("UPD.3") || '"';
468
469 Before fix, output was:
470 a) Upd.3="UPD.3"
471 b) Upd.3="text"
472 c) Upd.3="text"
473
474 after fix:
475 a) Upd.3="text"
476 b) Upd.3="text"
477 c) Upd.3="text"
478
479 /*--------------------------------------------------------------------
480 * Need to fix API call RexxVariablePool() to handle RXSHV_FETCH, RXSHV_SET
481 * and RXSHV_DROPV correctly. They currently behave the same way as
482 * RXSHV_SYFET, RXSHV_SYSET and RXSHV_SYDRO respectively. ie the variables
483 * are treated symbolically rather than explicitly.
484 * Reported by: Mark Hessling
485 * Bug Number: 022
486 * Fixed By: Jim Hasslacher, Jr.
487 * Fixed in: 0.08h
488 */
489
490 /*--------------------------------------------------------------------
491 * Assignment on compound variables does not work.
492 * Reported by: Mike Ruskai
493 * Bug Number: 026
494 * Fixed by: No fix required.
495 * Fixed in: Checked in 0.08h
496 * Comments: Regina follows the ANSI standard when assigning one
497 * stem variable to another.
498 * Confusion arises between the way that Object Rexx
499 * assigns one stem variable to another; Object Rexx does
500 * NOT follow the ANSI standard. In Object Rexx, a.=b.
501 * creates a reference from a. to b.; ie a. is the same
502 * stem as b.
503 */
504 foobar.1='One'
505 foobar.2='Two'
506 drop foobar.5
507 say 'FOOBAR.1 set to "One", FOOBAR.2 set to "Two", FOOBAR.5 dropped'
508 say 'assigning newstem1. to foobar. ...'
509 newstem1. = foobar.
510 say 'dropping newstem1.4'
511 drop newstem1.4
512 Say 'NEWSTEM1.1 Value:' '"'newstem1.1'" should be "FOOBAR."'
513 Say 'NEWSTEM1.2 Value:' '"'newstem1.2'" should be "FOOBAR."'
514 Say 'NEWSTEM1.3 Value:' '"'newstem1.3'" should be "FOOBAR."'
515 Say 'NEWSTEM1.4 Value:' '"'newstem1.4'" should be "NEWSTEM1.4"' '<-dropped'
516 Say 'NEWSTEM1.5 Value:' '"'newstem1.5'" should be "FOOBAR."'
517 say 'assigning newstem2. to newstem1. ...'
518 newstem2. = newstem1.
519 say 'dropping newstem2.4'
520 drop newstem2.4
521 Say 'NEWSTEM2.1 Value:' '"'newstem2.1'" should be "FOOBAR."'
522 Say 'NEWSTEM2.2 Value:' '"'newstem2.2'" should be "FOOBAR."'
523 Say 'NEWSTEM2.3 Value:' '"'newstem2.3'" should be "FOOBAR."'
524 Say 'NEWSTEM2.4 Value:' '"'newstem2.4'" should be "NEWSTEM2.4"' '<-dropped'
525 Say 'NEWSTEM2.5 Value:' '"'newstem2.5'" should be "FOOBAR."'
526 /* with default value for source stem */
527 foobar1. = 'default'
528 foobar1.1='One'
529 foobar1.2='Two'
530 drop foobar1.5
531 say 'FOOBAR1. set to "default", FOOBAR1.1 set to "One", FOOBAR1.2 set to "Two", FOOBAR1.5 dropped'
532 say 'assigning newstem. to foobar. ...'
533 newstem. = foobar1.
534 say 'dropping newstem.4'
535 drop newstem.4
536 Say 'NEWSTEM.1 Value:' '"'newstem.1'" should be "default"'
537 Say 'NEWSTEM.2 Value:' '"'newstem.2'" should be "default"'
538 Say 'NEWSTEM.3 Value:' '"'newstem.3'" should be "default"'
539 Say 'NEWSTEM.4 Value:' '"'newstem.4'" should be "NEWSTEM.4"' '<-dropped'
540 Say 'NEWSTEM.5 Value:' '"'newstem.5'" should be "default"'
541 Say 'NEWSTEM.6 Value:' '"'newstem.6'" should be "default"'
542
543 /*--------------------------------------------------------------------
544 * Inconsistent, invalid return values from STREAM (QUERY EXISTS) when
545 * using the EMX port of Regina under OS/2. This bug possible on other
546 * platforms.
547 * Reported by: Dennis Baeris
548 * Bug Number: 027
549 * Fixed by: Mark Hessling
550 * Fixed in: 0.08h
551 */
552 fn = 'bug027.txt'
553 Call Stream fn, 'C', 'OPEN WRITE REPLACE'
554 Call Lineout fn,'One line'
555 Call Stream fn, 'C', 'CLOSE'
556 line = Linein(fn)
557 Say 'Linein(fn) returned:' '"'line'"' 'should be return "One Line"'
558 stat = Stream(fn,'S')
559 Say 'Stream(fn,"S") returned:' '"'stat'"' 'should be return "READY"'
560 line = Linein(fn)
561 Say 'Linein(fn) returned:' '"'line'"' 'should be return ""'
562 stat = Stream(fn,'S')
563 Say 'Stream(fn,"S") returned:' '"'stat'"' 'should be return "NOTREADY"'
564
565 /*--------------------------------------------------------------------
566 * If Regina was invoked through the SAA interface, and the script named in
567 * the invocation did not exist, the error message did not correctly name
568 * it, or crashed.
569 * Reported By: Jim Hasslacher, Jr.
570 * Bug Number: 029
571 * Fixed By: Jim Hasslacher, Jr.
572 * Fixed in: 0.08h
573 */
574
575 /*--------------------------------------------------------------------
576 * Odd behaviour with DELWORD BIF.
577 * Line 1 gives '0' and this is correct (no '10' in the string).
578 * Line 3 makes the same string as used in line 1 and puts it into a.
579 * Line 4 now gives 3 !!!! Yet there is no '10' in there at all
580 * The rest is just to prove my point the length of the string doensn't change
581 * but after the strip all works as it should...
582 * I think the problem occurs when the first character of the searchstring and
583 * that of the deleted word are the same.
584 * MH - the problem occurs if the word following the word to be deleted is
585 * 1 character shorter than the word being deleted and starts with the
586 * same characters as the word being deleted. Seems the check for a word
587 * at the end of the string checks 1 character past the end of the string.
588 * Reported By: Thomas Zobl
589 * Bug Number: 030
590 * Fixed By: Mark Hessling
591 * Fixed in: 0.08h
592 */
593 Say Wordpos('10','2 11 1')
594
595 b = '2 11 10 1'
596 a = Delword('2 11 10 1',3,1)
597 Say Wordpos('10',a)
598
599 Say Length(a)
600 a = Strip(a)
601 Say Wordpos('10',a)
602 Say Length(a)
603
604 /*--------------------------------------------------------------------
605 * Passing a lower or mixed case variable name to RexxVariablePool() when
606 * setting a Rexx variable fails.
607 *
608 * Reported By: Bill Potvin, II
609 * Bug Number: 031
610 * Fixed By: Mark Hessling
611 * Fixed in: 0.08h
612 */
613 Returncode = SysFileTree("*","Files.")
614 say files.0 /* always returns FILES.0 */
615
616 /*--------------------------------------------------------------------
617 * When registering an external function from within the API, an attempt
618 * to register a function that is already loaded results in a return code
619 * of 1 NOT the correct value of 10 (RXFUNC_DEFINED).
620 *
621 * Reported By: Bill Potvin, II
622 * Bug Number: 033
623 * Fixed By: Mark Hessling
624 * Fixed in: 0.08h
625 */
626
627 /*--------------------------------------------------------------------
628 * The STREAM BIF using QUERY EXISTS incorrectly returns a file name
629 * when the file does not exist under some circumstances.
630 * If in directory e:\regina and a file exists: e:\config.sys, then
631 * Stream('e:\config.sys', 'C', 'QUERY EXISTS') returns:
632 * e:\regina\config.sys
633 *
634 * Reported By: Dennis Baeris
635 * Bug Number: 034
636 * Fixed By: Mark Hessling
637 * Fixed in: 0.08h
638 */
639
640 /*--------------------------------------------------------------------
641 * The following code causes Regina to crash.
642 * Reported by: Florian Grosse-Coosmann
643 * Bug Number: 032
644 * Fixed By: Florian Grosse-Coosmann
645 * Fixed in: 0.08h
646 */
647 Name = "Florian"
648 call MyName Name
649 call MyName2 Name
650 return 0
651
652 MyName:
653 say "Name =" Name || ",arg =" arg(1)
654 Name = "Coosmann"
655 say "Name =" Name || ",arg =" arg(1)
656 return
657
658 MyName2:
659 say "Name =" Name || ",arg =" arg(1)
660 Name = "Grosse-Coosmann"
661 say "Name =" Name || ",arg =" arg(1)
662 return
663
664 /*--------------------------------------------------------------------
665 * When calling an external subroutine and it is found by use of
666 * REGINA_MACROS environment variable, PARSE SOURCE does not return
667 * the filename of the file.
668 *
669 * Reported By: Steve Menschel
670 * Bug Number: 19991129-86098
671 * Fixed By: Mark Hessling
672 * Fixed in: 0.08h
673 */
674
675 /*--------------------------------------------------------------------
676 * Access to the external environment when using regina.dll under OS/2
677 * was not possible.
678 * This was due to the way that regina.exe was incorrectly built.
679 *
680 * Reported By: Paul G Barnett
681 * Bug Number: 035
682 * Fixed By: Mark Hessling
683 * Fixed in: 0.08h
684 */
685
686 /*--------------------------------------------------------------------
687 * Regina incorrectly handles DATE('L') for fractional seconds.
688 * The behaviour would result in consecutively displayed times like:
689 * 17:33:12.498812
690 * 17:33:13.512540
691 * 17:33:13.982322
692 * 17:33:13.049183
693 *
694 * Reported By: Dennis Baeris
695 * Bug Number: ?????
696 * Fixed By: Mark Hessling
697 * Fixed in: 2.0
698 */
699
700 /*--------------------------------------------------------------------
701 * CALL with parameters fails in various situations with syntax error.
702 * Reported by: Dennis Baeris
703 * Bug Number: 023
704 * Fixed by: Anders Christensen
705 * Fixed in: 2.0
706 */
707 myargs = 'arg1 arg2'
708 Call "myprog" myargs /* syntax error */
709 Call "myprog"myargs /* works */
710 Call Fred'1234' /* syntax error */
711
712 /*--------------------------------------------------------------------
713 * Regina incorrectly results in parse error when EXIT called with
714 * non-numeric parameter.
715 * eg. EXIT "fred"
716 *
717 * Reported By: Dennis Baeris
718 * Bug Number: 20000323-75678
719 * Fixed By: Mark Hessling
720 * Fixed in: 2.0
721 */
722
723 /*--------------------------------------------------------------------
724 * Regina get error when calling RETURN from top-level with a
725 * non-numeric parameter.
726 * eg. RETURN "fred"
727 *
728 * Reported By: Gerard Schildberger
729 * Bug Number: 20000325-12811
730 * Fixed By: Mark Hessling
731 * Fixed in: 2.0
732 */
733
734 /*--------------------------------------------------------------------
735 * RANDOM would only return a maximum value of 32767 on many platforms.
736 *
737 * Reported By: Alan Bardgett
738 * Bug Number: 20000128-69102
739 * Fixed By: Mark Hessling
740 * Fixed in: 2.0
741 */
742
743 /*--------------------------------------------------------------------
744 * The Regina parser incorrectly parses the sample code below, and
745 * returns the following error:
746 * Error 15 running "/home/mark/Regina-0.08h/bug030.rex", line 1: Invalid hexadecimal or binary constant
747 * Error 15.3: Only 0-9, a-f, A-F, and blank are valid in hexadecimal string; found "'<'x"
748 * Reported By: Mark Hessling
749 * Bug Number: 19991216-29512
750 * Fixed By: ??? pointed out that it is not a bug.
751 * Fixed in: 3.0.
752 */
753 Say '<'x'>'
754
755 /*--------------------------------------------------------------------
756 * The Regina parser incorrectly parses the sample code below, and
757 * returns the following error:
758 * Error 14 running "/home/mark/Regina-0.08h/bug29512.rex", line 2: Incomplete DO/IF/SELECT"
759 * If the '?' is protected by parentheses, it works.
760 * Reported By: Toby ?
761 * Bug Number: 19991216-29512
762 * Fixed By: ??
763 * Fixed in: ??
764 */
765 If (?) > 0 Then say 'OK'
766 If ? > 0 Then say 'OK'
767
768 /*--------------------------------------------------------------------
769 * Following code still fails with syntax error.
770 * Reported by: Mark Hessling
771 * Bug Number: 20000319-63722
772 * Fixed by:
773 * Fixed in:
774 */
775 Call Fred'1234' /* syntax error */
776
777 /*--------------------------------------------------------------------
778 * Regina crashes with following code:
779 * Reported by: Mark Hessling
780 * Bug Number: 36
781 * Fixed by:
782 * Fixed in:
783 */
784 Signal on syntax
785
786 Say fred()
787 Return
788
789 fred:
790 Return /* should return a value!! */
791
792 syntax:
793 Say Condition( 'D' )
794 Exit
795