This file explains, usually via sample code, some bugs that exist in this release of Regina. The smaller this file the better! Outstanding bugs are first; fixed ones at the end of this file. /*-------------------------------------------------------------------- * INTERPRET "return" does not work correctly. If a value is returned * it does work correctly. * Reported by: Paul G. Barnett * Bug Number: 020 * Fixed by: * Fixed in: */ Interpret "Return" Say "should not get here!" Return 1 /*-------------------------------------------------------------------- * LINES() BIF on transient streams return 1 when really at EOF * Run program below as: * regina test.rex BUGS * and as * cat BUGS | regina test.rex * Reported by: Mark Hessling * Bug Number: 021 * Fixed by: * Fixed in: */ /* test.rex */ Parse Arg fn numlines = 0 Do While(Lines(fn) > 0) line = Linein(fn) numlines = numlines + 1 End Say numlines 'in file' /*-------------------------------------------------------------------- * Regina appears to read complete data files into memory in some * operations. More details to be specified. * Reported by: ??? * Bug Number: 024 * Fixed by: * Fixed in: */ /*-------------------------------------------------------------------- * Clauses in the Interpret command are not traced correctly. * Reported by: Dennis Bareis * Bug Number: 025 * Fixed by: * Fixed in: */ /*-------------------------------------------------------------------- * TRACE R and TRACE I produce incorrect results in various * circumstances. * Reported by: Various * Bug Number: * Fixed by: * Fixed in: */ /*-------------------------------------------------------------------- * Regina is inconsistent with the ANSI standard when it comes to * treatment of whitespace in various circumstances. * Reported by: Dennis Baeris * Bug Number: 20000505-73993 * Fixed by: * Fixed in: */ a = '0a'x b = ' ' if a = b then say 'incorrect' else say 'ANSI correct' if strip(a) == strip(b) then say 'ANSI correct' else say 'incorrect' /*-------------------------------------------------------------------- * Regina does not trap conditions in externally called routines * Reported by: Mark Hessling * Bug Number: * Fixed by: * Fixed in: */ /* a1.rex */ signal on syntax call 'a2' 'an err' return 0 syntax: say 'syntax at' sigl exit 1 /* a2.rex - must be in REGINA_MACROS */ parse arg aa say 'in a2' aa say date('x') return Should result in: ---------------- in a2 an err syntax at 3 ====================================================================== ============================= FIXED ================================== ====================================================================== /*-------------------------------------------------------------------- * Subroutines cannot have leading numerics in their name. * Reported by: Frank M. Ramaekers Jr. * Bug Number: 001 * Fixed by: Mark Hessling * Fixed in: 0.08e */ Say 'starting...' rc = 1000_my_proc( "value" ) Return 1000_my_proc: Procedure Parse Arg parm . Say parm Return 0 /*-------------------------------------------------------------------- * Calling CHAROUT with the newline character, '0a'x, would result in * a CR and LF being output. This only happens under DOS, OS/2 and * Win32 platforms. * Reported by: Dennis Bareis * Bug Number: 002 * Fixed by: Mark Hessling * Fixed in: 0.08e */ newl = '0a'x Call charout "myfile", "Line 1" || newl Return /*-------------------------------------------------------------------- * Line continuation character; ',' followed by CRLF in source file * would give syntax error. * Reported by: Florian Grosse-Coosmann * Bug Number: 003 * Fixed by: Mark Hessling * Fixed in: 0.08e */ Say 'Hello', /* line ends in CRLF pair */ 'world' Return /*-------------------------------------------------------------------- * The value of the last token parsed with PARSE contains incorrect * leading space(s). * Reported by: Dennis Bareis * Bug Number: 004 * Fixed by: Florian Grosse-Coosmann * Fixed in: 0.08f */ a = 'one two three' Parse Var a one two three Say '<' || three || '>' /*-------------------------------------------------------------------- * The value returned by CHARS BIF was incorrect especially after a * LINEIN call. The result is the example following would never end. * Reported by: Yuri Shemanin * Bug Number: 005 * Fixed by: Yuri Shemanin * Fixed in: 0.08f */ f = 'junk' Do While Chars(f) <> 0 l = Linein(f) End /*-------------------------------------------------------------------- * On some platforms, if operating system command redirection was * done using >FIFO, and the current directory was not writeable by * the user, the command would fail. The cause is that the tmpnam() * C library function is broken on several compilers. * Added workaround to use environment variables, TMP, TEMP or TMPDIR. * Reported by: ??? * Bug Number: 006 * Fixed by: Mark Hessling * Fixed in: 0.08f */ /*-------------------------------------------------------------------- * On platforms that did not have a C library function, alloca() * Regina would leak memory. This has now been fixed by inclusion * of our own alloca() function if one doesn't exist. * Reported by: Mark Hessling * Bug Number: 007 * Fixed by: Mark Hessling * Fixed in: 0.08f */ /*-------------------------------------------------------------------- * A bug in the Win95/98 command processor results in any call to * an operating system command ALWAYS return 0, even though the * command fails. * This change attempts to circumvent this bug, but it can't in all * circumstances. If the operating system command called is an * executable file, and there is no output/input redirection, then * the return code from the executable program will be returned. Any * internal COMMAND.COM command, such as COPY, will ALWAYS return 0; * there is no way around this until M$ fix there COMMAND.COM. * If you use JP Software's 4DOS for NT, then you will have no problems * as it correctly returns the error from the internal command. * Reported by: Michael Sundermann * Bug Number: 008 * Fixed by: Michael Sundermann * Fixed in: 0.08f */ /*-------------------------------------------------------------------- * The result of the expression (0 = zero) should be 1, but Regina * returns 0 * Reported by: Dan Hofferth * Bug Number: 009 * Fixed by: Florian Grosse-Coosman * Fixed in: 0.08f */ zero = 0.000 say ( 0 = zero ) /* should say 1, but 0 */ /*-------------------------------------------------------------------- * A numeric variable "exposed" by a procedure and subsequently used * in a loop within the procedure that exposed it, gets an erroneous * value. * Reported by: rick@emma.panam.wimsey.com * Bug Number: 010 * Fixed by: Florian Grosse-Coosmann * Fixed in: 0.08f */ num = 0 Call my_proc Say 'num = ' num ';should be 6' Return my_proc: Procedure Expose num Say 'num = ' num ';should be 0' Do 3 num = num + 1 End Say 'num = ' num ';should be 3' num = num + 3 Say 'num = ' num ';should be 6' Return /*-------------------------------------------------------------------- * An error with dropping variables... * Reported by: Dennis Bareis * Bug Number: 011 * Fixed by: Mark Hessling * Fixed in: 0.08f */ call SaveInfo "Fred", "FredsValue"; call SaveInfo "Fred", "FredsValue2"; call HandleUndefCommand "Fred"; call SaveInfo "Fred", "FredsValue3"; say 'Passed!!!'; exit(0); HandleUndefCommand: SavedAs = "Define." || arg(1); say ''; say '0.DROPPING "' || SavedAs || '"'; if symbol(SavedAs) = 'VAR' then drop(SavedAs) return; SaveInfo: /*--- Check if variable previously existed ------------------------*/ say ''; say '0.SETTING - ' || arg(1) || ' to "' || arg(2) || '"'; SavedAs = "Define." || arg(1); if symbol(SavedAs) = 'VAR' then say '1.Already Existed'; else say '1.New info'; /*--- Save info ---------------------------------------------------*/ ExecutingCmd = SavedAs || ' = arg(2)' say '2.Executing: "' || ExecutingCmd || '"' interpret ExecutingCmd; /*--- Check variable again! ---------------------------------------*/ if symbol(SavedAs) = 'VAR' then do interpret 'ItsValue = ' || SavedAs; say '3.Variable exists, value = "' || ItsValue || '"' end else do say '3.JUST SET VAR YET - Variable does not exist - WRONG!'; exit(1); end; return; ******************** OUTPUT (note Define.FRED seems to exist TWICE in multiple cases): 0.SETTING - Fred to "FredsValue" 1.New info 2.Executing: "Define.Fred = arg(2)" 3.Variable exists, value = "FredsValue" 0.SETTING - Fred to "FredsValue2" 1.Already Existed 2.Executing: "Define.Fred = arg(2)" 3.Variable exists, value = "FredsValue2" 0.DROPPING "Define.Fred" 0.SETTING - Fred to "FredsValue3" 1.New info 2.Executing: "Define.Fred = arg(2)" 3.JUST SET VAR YET - Variable does not exist - WRONG! ^^^^^^^^^^^^^^^^^^^^ Dumping variables to Variables from bin no 0 >>> Variable: EXECUTINGCMD Value: [Define.Fred = arg(2)] Variables from bin no 107 >>> Stem : Define. Default: [] Values: Sub-bin no 161 >>> Tail: FRED Value: [] >>> Stem : DEFINE. Default: [] Values: Sub-bin no 161 >>> Tail: FRED Value: [FredsValue3] Variables from bin no 109 >>> Variable: ITSVALUE Value: [FredsValue2] Variables from bin no 175 >>> Variable: SIGL Value: [8] Variables from bin no 231 >>> Variable: SAVEDAS Value: [Define.Fred] ^^^^^^^^^^^^^^^^^^^^ /*-------------------------------------------------------------------- * Allow "stderr" to be used to refer to stderr in STREAM BIF. * Reported by: Dennis Bareis * Bug Number: 012 * Fixed by: Mark Hessling * Fixed in: 0.08f */ rc = Stream('stderr', 'C', 'QUERY EXISTS') /*-------------------------------------------------------------------- * The internal variable SIGL gets updated prematurely. * Reported by: Dennis Bareis * Bug Number: 013 * Fixed by: Florian Grosse-Coosmann * Fixed in: 0.08f */ Call Alabel Return ALabel: Call AnotherLabel SIGL Return AnotherLabel: Parse Arg lineo Say lineno Return /*-------------------------------------------------------------------- * A syntax error in a Rexx script passed to the RexxStart() API via * the "instore" option, will exit the program, rather than return an * error. * Reported by: Mark Hessling * Bug Number: 014 * Fixed by: Florian Grosse-Coosmann * Fixed in: 0.08f */ /*-------------------------------------------------------------------- * The VALUE() BIF would not set values of compound variables correctly * if the variable is specified in lower case. * Reported by: Jeff Parlant and Dennis Bareis * Bug Number: 015 * Fixed by: Mark Hessling * Fixed in: 0.08g */ stemname = 'foo.' foo.0 = 1 foo.1 = 'something' call func say foo.0 say foo.1 exit 0 func: procedure expose stemname (stemname) /* trace ?i */ do i = 1 to value(stemname||0) r = value(stemname||i,'something else') end return 0 /*-------------------------------------------------------------------- * The value of the last argument to a procedure when using the ARG() BIF * has an incorrect trailing space. * Reported by: Mark Hessling * Bug Number: 016 * Fixed by: Mark Hessling * Fixed in: 0.08g */ Call proc '123', '456' Return proc: Say '<' || arg(1) || '>' /* displays <123> */ Say '<' || arg(2) || '>' /* displays <456 > */ Return /*-------------------------------------------------------------------- * INTERPRET "return Func()" does not work correctly. * Reported by: Paul G. Barnett * Bug Number: 017 * Fixed by: Mark Hessling * Fixed in: 0.08g - See Bug 020 */ Interpret "Return F1()" Say "should not get here!" Return F1: Procedure Say "in F1" Return 0 /*-------------------------------------------------------------------- * File names in Regina are always case sensitive, even on non-Unix * platforms. This can result in incorrect read/write pointers when * referencing a file by name with different case. * Reported by: Jackie Cooper * Bug Number: 018 * Fixed by: Mark Hessling * Fixed in: 0.08g */ myfile = 'abc' myupperfile = 'ABC' Call Lineout, myfile, 'Line1' Call Lineout, myupperfile, 'Line2' Call Lineout, myfile numlines = 0 Do While(Lines(myfile)>0) numlines = numlines + 1 End Say 'Should be 2 lines, but got only' numlines Return /*-------------------------------------------------------------------- * Setting Rexx variables using VALUE BIF produce inconsistent results. * Reported by: Dennis Baeris * Bug Number: 019 * Fixed by: Mark Hessling * Fixed in: 0.08h */ call value "Upd.3", "text"; say 'a) Upd.3="' || Upd.3 || '"'; say 'b) Upd.3="' || value("Upd.3") || '"'; say 'c) Upd.3="' || value("UPD.3") || '"'; Before fix, output was: a) Upd.3="UPD.3" b) Upd.3="text" c) Upd.3="text" after fix: a) Upd.3="text" b) Upd.3="text" c) Upd.3="text" /*-------------------------------------------------------------------- * Need to fix API call RexxVariablePool() to handle RXSHV_FETCH, RXSHV_SET * and RXSHV_DROPV correctly. They currently behave the same way as * RXSHV_SYFET, RXSHV_SYSET and RXSHV_SYDRO respectively. ie the variables * are treated symbolically rather than explicitly. * Reported by: Mark Hessling * Bug Number: 022 * Fixed By: Jim Hasslacher, Jr. * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * Assignment on compound variables does not work. * Reported by: Mike Ruskai * Bug Number: 026 * Fixed by: No fix required. * Fixed in: Checked in 0.08h * Comments: Regina follows the ANSI standard when assigning one * stem variable to another. * Confusion arises between the way that Object Rexx * assigns one stem variable to another; Object Rexx does * NOT follow the ANSI standard. In Object Rexx, a.=b. * creates a reference from a. to b.; ie a. is the same * stem as b. */ foobar.1='One' foobar.2='Two' drop foobar.5 say 'FOOBAR.1 set to "One", FOOBAR.2 set to "Two", FOOBAR.5 dropped' say 'assigning newstem1. to foobar. ...' newstem1. = foobar. say 'dropping newstem1.4' drop newstem1.4 Say 'NEWSTEM1.1 Value:' '"'newstem1.1'" should be "FOOBAR."' Say 'NEWSTEM1.2 Value:' '"'newstem1.2'" should be "FOOBAR."' Say 'NEWSTEM1.3 Value:' '"'newstem1.3'" should be "FOOBAR."' Say 'NEWSTEM1.4 Value:' '"'newstem1.4'" should be "NEWSTEM1.4"' '<-dropped' Say 'NEWSTEM1.5 Value:' '"'newstem1.5'" should be "FOOBAR."' say 'assigning newstem2. to newstem1. ...' newstem2. = newstem1. say 'dropping newstem2.4' drop newstem2.4 Say 'NEWSTEM2.1 Value:' '"'newstem2.1'" should be "FOOBAR."' Say 'NEWSTEM2.2 Value:' '"'newstem2.2'" should be "FOOBAR."' Say 'NEWSTEM2.3 Value:' '"'newstem2.3'" should be "FOOBAR."' Say 'NEWSTEM2.4 Value:' '"'newstem2.4'" should be "NEWSTEM2.4"' '<-dropped' Say 'NEWSTEM2.5 Value:' '"'newstem2.5'" should be "FOOBAR."' /* with default value for source stem */ foobar1. = 'default' foobar1.1='One' foobar1.2='Two' drop foobar1.5 say 'FOOBAR1. set to "default", FOOBAR1.1 set to "One", FOOBAR1.2 set to "Two", FOOBAR1.5 dropped' say 'assigning newstem. to foobar. ...' newstem. = foobar1. say 'dropping newstem.4' drop newstem.4 Say 'NEWSTEM.1 Value:' '"'newstem.1'" should be "default"' Say 'NEWSTEM.2 Value:' '"'newstem.2'" should be "default"' Say 'NEWSTEM.3 Value:' '"'newstem.3'" should be "default"' Say 'NEWSTEM.4 Value:' '"'newstem.4'" should be "NEWSTEM.4"' '<-dropped' Say 'NEWSTEM.5 Value:' '"'newstem.5'" should be "default"' Say 'NEWSTEM.6 Value:' '"'newstem.6'" should be "default"' /*-------------------------------------------------------------------- * Inconsistent, invalid return values from STREAM (QUERY EXISTS) when * using the EMX port of Regina under OS/2. This bug possible on other * platforms. * Reported by: Dennis Baeris * Bug Number: 027 * Fixed by: Mark Hessling * Fixed in: 0.08h */ fn = 'bug027.txt' Call Stream fn, 'C', 'OPEN WRITE REPLACE' Call Lineout fn,'One line' Call Stream fn, 'C', 'CLOSE' line = Linein(fn) Say 'Linein(fn) returned:' '"'line'"' 'should be return "One Line"' stat = Stream(fn,'S') Say 'Stream(fn,"S") returned:' '"'stat'"' 'should be return "READY"' line = Linein(fn) Say 'Linein(fn) returned:' '"'line'"' 'should be return ""' stat = Stream(fn,'S') Say 'Stream(fn,"S") returned:' '"'stat'"' 'should be return "NOTREADY"' /*-------------------------------------------------------------------- * If Regina was invoked through the SAA interface, and the script named in * the invocation did not exist, the error message did not correctly name * it, or crashed. * Reported By: Jim Hasslacher, Jr. * Bug Number: 029 * Fixed By: Jim Hasslacher, Jr. * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * Odd behaviour with DELWORD BIF. * Line 1 gives '0' and this is correct (no '10' in the string). * Line 3 makes the same string as used in line 1 and puts it into a. * Line 4 now gives 3 !!!! Yet there is no '10' in there at all * The rest is just to prove my point the length of the string doensn't change * but after the strip all works as it should... * I think the problem occurs when the first character of the searchstring and * that of the deleted word are the same. * MH - the problem occurs if the word following the word to be deleted is * 1 character shorter than the word being deleted and starts with the * same characters as the word being deleted. Seems the check for a word * at the end of the string checks 1 character past the end of the string. * Reported By: Thomas Zobl * Bug Number: 030 * Fixed By: Mark Hessling * Fixed in: 0.08h */ Say Wordpos('10','2 11 1') b = '2 11 10 1' a = Delword('2 11 10 1',3,1) Say Wordpos('10',a) Say Length(a) a = Strip(a) Say Wordpos('10',a) Say Length(a) /*-------------------------------------------------------------------- * Passing a lower or mixed case variable name to RexxVariablePool() when * setting a Rexx variable fails. * * Reported By: Bill Potvin, II * Bug Number: 031 * Fixed By: Mark Hessling * Fixed in: 0.08h */ Returncode = SysFileTree("*","Files.") say files.0 /* always returns FILES.0 */ /*-------------------------------------------------------------------- * When registering an external function from within the API, an attempt * to register a function that is already loaded results in a return code * of 1 NOT the correct value of 10 (RXFUNC_DEFINED). * * Reported By: Bill Potvin, II * Bug Number: 033 * Fixed By: Mark Hessling * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * The STREAM BIF using QUERY EXISTS incorrectly returns a file name * when the file does not exist under some circumstances. * If in directory e:\regina and a file exists: e:\config.sys, then * Stream('e:\config.sys', 'C', 'QUERY EXISTS') returns: * e:\regina\config.sys * * Reported By: Dennis Baeris * Bug Number: 034 * Fixed By: Mark Hessling * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * The following code causes Regina to crash. * Reported by: Florian Grosse-Coosmann * Bug Number: 032 * Fixed By: Florian Grosse-Coosmann * Fixed in: 0.08h */ Name = "Florian" call MyName Name call MyName2 Name return 0 MyName: say "Name =" Name || ",arg =" arg(1) Name = "Coosmann" say "Name =" Name || ",arg =" arg(1) return MyName2: say "Name =" Name || ",arg =" arg(1) Name = "Grosse-Coosmann" say "Name =" Name || ",arg =" arg(1) return /*-------------------------------------------------------------------- * When calling an external subroutine and it is found by use of * REGINA_MACROS environment variable, PARSE SOURCE does not return * the filename of the file. * * Reported By: Steve Menschel * Bug Number: 19991129-86098 * Fixed By: Mark Hessling * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * Access to the external environment when using regina.dll under OS/2 * was not possible. * This was due to the way that regina.exe was incorrectly built. * * Reported By: Paul G Barnett * Bug Number: 035 * Fixed By: Mark Hessling * Fixed in: 0.08h */ /*-------------------------------------------------------------------- * Regina incorrectly handles DATE('L') for fractional seconds. * The behaviour would result in consecutively displayed times like: * 17:33:12.498812 * 17:33:13.512540 * 17:33:13.982322 * 17:33:13.049183 * * Reported By: Dennis Baeris * Bug Number: ????? * Fixed By: Mark Hessling * Fixed in: 2.0 */ /*-------------------------------------------------------------------- * CALL with parameters fails in various situations with syntax error. * Reported by: Dennis Baeris * Bug Number: 023 * Fixed by: Anders Christensen * Fixed in: 2.0 */ myargs = 'arg1 arg2' Call "myprog" myargs /* syntax error */ Call "myprog"myargs /* works */ Call Fred'1234' /* syntax error */ /*-------------------------------------------------------------------- * Regina incorrectly results in parse error when EXIT called with * non-numeric parameter. * eg. EXIT "fred" * * Reported By: Dennis Baeris * Bug Number: 20000323-75678 * Fixed By: Mark Hessling * Fixed in: 2.0 */ /*-------------------------------------------------------------------- * Regina get error when calling RETURN from top-level with a * non-numeric parameter. * eg. RETURN "fred" * * Reported By: Gerard Schildberger * Bug Number: 20000325-12811 * Fixed By: Mark Hessling * Fixed in: 2.0 */ /*-------------------------------------------------------------------- * RANDOM would only return a maximum value of 32767 on many platforms. * * Reported By: Alan Bardgett * Bug Number: 20000128-69102 * Fixed By: Mark Hessling * Fixed in: 2.0 */ /*-------------------------------------------------------------------- * The Regina parser incorrectly parses the sample code below, and * returns the following error: * Error 15 running "/home/mark/Regina-0.08h/bug030.rex", line 1: Invalid hexadecimal or binary constant * Error 15.3: Only 0-9, a-f, A-F, and blank are valid in hexadecimal string; found "'<'x" * Reported By: Mark Hessling * Bug Number: 19991216-29512 * Fixed By: ??? pointed out that it is not a bug. * Fixed in: 3.0. */ Say '<'x'>' /*-------------------------------------------------------------------- * The Regina parser incorrectly parses the sample code below, and * returns the following error: * Error 14 running "/home/mark/Regina-0.08h/bug29512.rex", line 2: Incomplete DO/IF/SELECT" * If the '?' is protected by parentheses, it works. * Reported By: Toby ? * Bug Number: 19991216-29512 * Fixed By: ?? * Fixed in: ?? */ If (?) > 0 Then say 'OK' If ? > 0 Then say 'OK' /*-------------------------------------------------------------------- * Following code still fails with syntax error. * Reported by: Mark Hessling * Bug Number: 20000319-63722 * Fixed by: * Fixed in: */ Call Fred'1234' /* syntax error */ /*-------------------------------------------------------------------- * Regina crashes with following code: * Reported by: Mark Hessling * Bug Number: 36 * Fixed by: * Fixed in: */ Signal on syntax Say fred() Return fred: Return /* should return a value!! */ syntax: Say Condition( 'D' ) Exit