Debian Codegraph @

upstream/debian-unstable/man2/ioctl_console.2

raw
1 .\" Copyright 1995, James R. Van Zandt <[email protected]>
2 .\" Copyright 1995, Andries E. Brouwer <[email protected]>
3 .\" Copyright 1995, Rickard E. Faith <[email protected]>
4 .\" Copyright 1995, H. Peter Anvin <[email protected]>
5 .\" Copyright, the authors of the Linux man-pages project
6 .\"
7 .\" SPDX-License-Identifier: GPL-2.0-or-later
8 .\"
9 .TH ioctl_console 2 2026-02-08 "Linux man-pages 6.18"
10 .SH NAME
11 ioctl_console \- ioctls for console terminal and virtual consoles
12 .SH SYNOPSIS
13 .nf
14 .B #include <sys/ioctl.h>
15 .P
16 .BI "int ioctl(int " fd ", unsigned long " op ", ...);"
17 .fi
18 .SH DESCRIPTION
19 The following Linux-specific
20 .BR ioctl (2)
21 operations are supported for console terminals and virtual consoles.
22 .TP
23 .BR KDGETLED (2const)
24 .TQ
25 .BR KDSETLED (2const)
26 .TQ
27 .BR KDGKBLED (2const)
28 .TQ
29 .BR KDSKBLED (2const)
30 .TQ
31 .BR KDGKBTYPE (2const)
32 .TQ
33 .BR KDADDIO (2const)
34 .TQ
35 .BR KDDELIO (2const)
36 .TQ
37 .BR KDENABIO (2const)
38 .TQ
39 .BR KDDISABIO (2const)
40 .TQ
41 .BR KDSETMODE (2const)
42 .TQ
43 .BR KDGETMODE (2const)
44 .TQ
45 .BR KDMKTONE (2const)
46 .TQ
47 .BR KIOCSOUND (2const)
48 .TQ
49 .BR GIO_CMAP (2const)
50 .TQ
51 .BR PIO_CMAP (2const)
52 .TQ
53 .BR GIO_FONT (2const)
54 .TQ
55 .BR GIO_FONTX (2const)
56 .TQ
57 .BR PIO_FONT (2const)
58 .TQ
59 .BR PIO_FONTX (2const)
60 .TQ
61 .BR PIO_FONTRESET (2const)
62 .TQ
63 .BR GIO_SCRNMAP (2const)
64 .TQ
65 .BR GIO_UNISCRNMAP (2const)
66 .TQ
67 .BR PIO_SCRNMAP (2const)
68 .TQ
69 .BR PIO_UNISCRNMAP (2const)
70 .TQ
71 .BR GIO_UNIMAP (2const)
72 .TQ
73 .BR PIO_UNIMAP (2const)
74 .TQ
75 .BR PIO_UNIMAPCLR (2const)
76 .TQ
77 .BR KDGKBMODE (2const)
78 .TQ
79 .BR KDSKBMODE (2const)
80 .TQ
81 .BR KDGKBMETA (2const)
82 .TQ
83 .BR KDSKBMETA (2const)
84 .TQ
85 .BR KDGKBENT (2const)
86 .TQ
87 .BR KDSKBENT (2const)
88 .TQ
89 .BR KDGKBSENT (2const)
90 .TQ
91 .BR KDSKBSENT (2const)
92 .TQ
93 .BR KDGKBDIACR (2const)
94 .TQ
95 .BR KDGETKEYCODE (2const)
96 .TQ
97 .BR KDSETKEYCODE (2const)
98 .TQ
99 .BR KDSIGACCEPT (2const)
100 See
101 .BR ioctl_kd (2).
102 .TP
103 .BR TIOCLINUX (2const)
104 .TP
105 .BR VT_OPENQRY (2const)
106 .TQ
107 .BR VT_GETMODE (2const)
108 .TQ
109 .BR VT_SETMODE (2const)
110 .TQ
111 .BR VT_GETSTATE (2const)
112 .TQ
113 .BR VT_RELDISP (2const)
114 .TQ
115 .BR VT_ACTIVATE (2const)
116 .TQ
117 .BR VT_WAITACTIVE (2const)
118 .TQ
119 .BR VT_DISALLOCATE (2const)
120 .TQ
121 .BR VT_RESIZE (2const)
122 .TQ
123 .BR VT_RESIZEX (2const)
124 See
125 .BR ioctl_vt (2).
126 .SH RETURN VALUE
127 On success, 0 is returned (except where indicated).
128 On failure, \-1 is returned, and
129 .I errno
130 is set to indicate the error.
131 .SH STANDARDS
132 Linux.
133 .SH CAVEATS
134 Do not regard this man page as documentation of the Linux console ioctls.
135 This is provided for the curious only, as an alternative to reading the
136 source.
137 Ioctl's are undocumented Linux internals, liable to be changed
138 without warning.
139 (And indeed, this page more or less describes the
140 situation as of kernel version 1.1.94;
141 there are many minor and not-so-minor
142 differences with earlier versions.)
143 .P
144 Very often, ioctls are introduced for communication between the
145 kernel and one particular well-known program (fdisk, hdparm, setserial,
146 tunelp, loadkeys, selection, setfont, etc.), and their behavior will be
147 changed when required by this particular program.
148 .SH SEE ALSO
149 .BR ioctl (2),
150 .BR TIOCLINUX (2const),
151 .BR ioctl_kd (2),
152 .BR ioctl_vt (2),
153 .BR dumpkeys (1),
154 .BR kbd_mode (1),
155 .BR loadkeys (1),
156 .BR mknod (1),
157 .BR setleds (1),
158 .BR setmetamode (1),
159 .BR execve (2),
160 .BR fcntl (2),
161 .BR ioctl_tty (2),
162 .BR ioperm (2),
163 .BR termios (3),
164 .BR console_codes (4),
165 .BR mt (4),
166 .BR sd (4),
167 .BR tty (4),
168 .BR ttyS (4),
169 .BR vcs (4),
170 .BR vcsa (4),
171 .BR charsets (7),
172 .BR mapscrn (8),
173 .BR resizecons (8),
174 .BR setfont (8)