| 1 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
| 2 |
/* |
| 3 |
* upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines |
| 4 |
* |
| 5 |
* 2006 by Hans Verkuil ([email protected]) |
| 6 |
*/ |
| 7 |
|
| 8 |
#ifndef _UPD64083_H_ |
| 9 |
#define _UPD64083_H_ |
| 10 |
|
| 11 |
/* There are two bits of information that the driver needs in order |
| 12 |
to select the correct routing: the operating mode and the selection |
| 13 |
of the Y input (external or internal). |
| 14 |
|
| 15 |
The first two operating modes expect a composite signal on the Y input, |
| 16 |
the second two operating modes use both the Y and C inputs. |
| 17 |
|
| 18 |
Normally YCS_MODE is used for tuner and composite inputs, and the |
| 19 |
YCNR mode is used for S-Video inputs. |
| 20 |
|
| 21 |
The external Y-ADC is selected when the composite input comes from a |
| 22 |
upd64031a ghost reduction device. If this device is not present, or |
| 23 |
the input is a S-Video signal, then the internal Y-ADC input should |
| 24 |
be used. */ |
| 25 |
|
| 26 |
/* Operating modes: */ |
| 27 |
|
| 28 |
/* YCS mode: Y/C separation (burst locked clocking) */ |
| 29 |
#define UPD64083_YCS_MODE 0 |
| 30 |
/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */ |
| 31 |
#define UPD64083_YCS_PLUS_MODE 1 |
| 32 |
|
| 33 |
/* Note: the following two modes cannot be used in combination with the |
| 34 |
external Y-ADC. */ |
| 35 |
/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */ |
| 36 |
#define UPD64083_MNNR_MODE 2 |
| 37 |
/* YCNR mode: frame recursive YCNR (burst locked clocking) */ |
| 38 |
#define UPD64083_YCNR_MODE 3 |
| 39 |
|
| 40 |
/* Select external Y-ADC: this should be set if this device is used in |
| 41 |
combination with the upd64031a ghost reduction device. |
| 42 |
Otherwise leave at 0 (use internal Y-ADC). */ |
| 43 |
#define UPD64083_EXT_Y_ADC (1 << 2) |
| 44 |
|
| 45 |
#endif |