| 1 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
| 2 |
/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics |
| 3 |
* Digitizer with Horizontal PLL registers |
| 4 |
* |
| 5 |
* Copyright (C) 2009 Texas Instruments Inc |
| 6 |
* Author: Santiago Nunez-Corrales <[email protected]> |
| 7 |
* |
| 8 |
* This code is partially based upon the TVP5150 driver |
| 9 |
* written by Mauro Carvalho Chehab <[email protected]>, |
| 10 |
* the TVP514x driver written by Vaibhav Hiremath <[email protected]> |
| 11 |
* and the TVP7002 driver in the TI LSP 2.10.00.14 |
| 12 |
*/ |
| 13 |
#ifndef _TVP7002_H_ |
| 14 |
#define _TVP7002_H_ |
| 15 |
|
| 16 |
#define TVP7002_MODULE_NAME "tvp7002" |
| 17 |
|
| 18 |
/** |
| 19 |
* struct tvp7002_config - Platform dependent data |
| 20 |
*@clk_polarity: Clock polarity |
| 21 |
* 0 - Data clocked out on rising edge of DATACLK signal |
| 22 |
* 1 - Data clocked out on falling edge of DATACLK signal |
| 23 |
*@hs_polarity: HSYNC polarity |
| 24 |
* 0 - Active low HSYNC output, 1 - Active high HSYNC output |
| 25 |
*@vs_polarity: VSYNC Polarity |
| 26 |
* 0 - Active low VSYNC output, 1 - Active high VSYNC output |
| 27 |
*@fid_polarity: Active-high Field ID polarity. |
| 28 |
* 0 - The field ID output is set to logic 1 for an odd field |
| 29 |
* (field 1) and set to logic 0 for an even field (field 0). |
| 30 |
* 1 - Operation with polarity inverted. |
| 31 |
*@sog_polarity: Active high Sync on Green output polarity. |
| 32 |
* 0 - Normal operation, 1 - Operation with polarity inverted |
| 33 |
*/ |
| 34 |
struct tvp7002_config { |
| 35 |
bool clk_polarity; |
| 36 |
bool hs_polarity; |
| 37 |
bool vs_polarity; |
| 38 |
bool fid_polarity; |
| 39 |
bool sog_polarity; |
| 40 |
}; |
| 41 |
#endif |