| 1 |
/* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 |
/* |
| 3 |
* tc358743 - Toshiba HDMI to CSI-2 bridge |
| 4 |
* |
| 5 |
* Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| 6 |
*/ |
| 7 |
|
| 8 |
/* |
| 9 |
* References (c = chapter, p = page): |
| 10 |
* REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60 |
| 11 |
* REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls |
| 12 |
*/ |
| 13 |
|
| 14 |
#ifndef _TC358743_ |
| 15 |
#define _TC358743_ |
| 16 |
|
| 17 |
enum tc358743_ddc5v_delays { |
| 18 |
DDC5V_DELAY_0_MS, |
| 19 |
DDC5V_DELAY_50_MS, |
| 20 |
DDC5V_DELAY_100_MS, |
| 21 |
DDC5V_DELAY_200_MS, |
| 22 |
}; |
| 23 |
|
| 24 |
enum tc358743_hdmi_detection_delay { |
| 25 |
HDMI_MODE_DELAY_0_MS, |
| 26 |
HDMI_MODE_DELAY_25_MS, |
| 27 |
HDMI_MODE_DELAY_50_MS, |
| 28 |
HDMI_MODE_DELAY_100_MS, |
| 29 |
}; |
| 30 |
|
| 31 |
struct tc358743_platform_data { |
| 32 |
/* System clock connected to REFCLK (pin H5) */ |
| 33 |
u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */ |
| 34 |
|
| 35 |
/* DDC +5V debounce delay to avoid spurious interrupts when the cable |
| 36 |
* is connected. |
| 37 |
* Sets DDC5V_MODE in register DDC_CTL. |
| 38 |
* Default: DDC5V_DELAY_0_MS |
| 39 |
*/ |
| 40 |
enum tc358743_ddc5v_delays ddc5v_delay; |
| 41 |
|
| 42 |
bool enable_hdcp; |
| 43 |
|
| 44 |
/* |
| 45 |
* The FIFO size is 512x32, so Toshiba recommend to set the default FIFO |
| 46 |
* level to somewhere in the middle (e.g. 300), so it can cover speed |
| 47 |
* mismatches in input and output ports. |
| 48 |
*/ |
| 49 |
u16 fifo_level; |
| 50 |
|
| 51 |
/* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */ |
| 52 |
u16 pll_prd; |
| 53 |
u16 pll_fbd; |
| 54 |
|
| 55 |
/* CSI |
| 56 |
* Calculate CSI parameters with REF_02 for the highest resolution your |
| 57 |
* CSI interface can handle. The driver will adjust the number of CSI |
| 58 |
* lanes in use according to the pixel clock. |
| 59 |
* |
| 60 |
* The values in brackets are calculated with REF_02 when the number of |
| 61 |
* bps pr lane is 823.5 MHz, and can serve as a starting point. |
| 62 |
*/ |
| 63 |
u32 lineinitcnt; /* (0x00001770) */ |
| 64 |
u32 lptxtimecnt; /* (0x00000005) */ |
| 65 |
u32 tclk_headercnt; /* (0x00001d04) */ |
| 66 |
u32 tclk_trailcnt; /* (0x00000000) */ |
| 67 |
u32 ths_headercnt; /* (0x00000505) */ |
| 68 |
u32 twakeup; /* (0x00004650) */ |
| 69 |
u32 tclk_postcnt; /* (0x00000000) */ |
| 70 |
u32 ths_trailcnt; /* (0x00000004) */ |
| 71 |
u32 hstxvregcnt; /* (0x00000005) */ |
| 72 |
|
| 73 |
/* DVI->HDMI detection delay to avoid unnecessary switching between DVI |
| 74 |
* and HDMI mode. |
| 75 |
* Sets HDMI_DET_V in register HDMI_DET. |
| 76 |
* Default: HDMI_MODE_DELAY_0_MS |
| 77 |
*/ |
| 78 |
enum tc358743_hdmi_detection_delay hdmi_detection_delay; |
| 79 |
|
| 80 |
/* Reset PHY automatically when TMDS clock goes from DC to AC. |
| 81 |
* Sets PHY_AUTO_RST2 in register PHY_CTL2. |
| 82 |
* Default: false |
| 83 |
*/ |
| 84 |
bool hdmi_phy_auto_reset_tmds_detected; |
| 85 |
|
| 86 |
/* Reset PHY automatically when TMDS clock passes 21 MHz. |
| 87 |
* Sets PHY_AUTO_RST3 in register PHY_CTL2. |
| 88 |
* Default: false |
| 89 |
*/ |
| 90 |
bool hdmi_phy_auto_reset_tmds_in_range; |
| 91 |
|
| 92 |
/* Reset PHY automatically when TMDS clock is detected. |
| 93 |
* Sets PHY_AUTO_RST4 in register PHY_CTL2. |
| 94 |
* Default: false |
| 95 |
*/ |
| 96 |
bool hdmi_phy_auto_reset_tmds_valid; |
| 97 |
|
| 98 |
/* Reset HDMI PHY automatically when hsync period is out of range. |
| 99 |
* Sets H_PI_RST in register HV_RST. |
| 100 |
* Default: false |
| 101 |
*/ |
| 102 |
bool hdmi_phy_auto_reset_hsync_out_of_range; |
| 103 |
|
| 104 |
/* Reset HDMI PHY automatically when vsync period is out of range. |
| 105 |
* Sets V_PI_RST in register HV_RST. |
| 106 |
* Default: false |
| 107 |
*/ |
| 108 |
bool hdmi_phy_auto_reset_vsync_out_of_range; |
| 109 |
}; |
| 110 |
|
| 111 |
/* custom controls */ |
| 112 |
/* Audio sample rate in Hz */ |
| 113 |
#define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0) |
| 114 |
/* Audio present status */ |
| 115 |
#define TC358743_CID_AUDIO_PRESENT (V4L2_CID_USER_TC358743_BASE + 1) |
| 116 |
|
| 117 |
#endif |