| 1 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
| 2 |
/* |
| 3 |
saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags |
| 4 |
|
| 5 |
Copyright (C) 2006 Hans Verkuil ([email protected]) |
| 6 |
|
| 7 |
*/ |
| 8 |
|
| 9 |
#ifndef _SAA7115_H_ |
| 10 |
#define _SAA7115_H_ |
| 11 |
|
| 12 |
/* s_routing inputs, outputs, and config */ |
| 13 |
|
| 14 |
/* SAA7111/3/4/5 HW inputs */ |
| 15 |
#define SAA7115_COMPOSITE0 0 |
| 16 |
#define SAA7115_COMPOSITE1 1 |
| 17 |
#define SAA7115_COMPOSITE2 2 |
| 18 |
#define SAA7115_COMPOSITE3 3 |
| 19 |
#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ |
| 20 |
#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ |
| 21 |
#define SAA7115_SVIDEO0 6 |
| 22 |
#define SAA7115_SVIDEO1 7 |
| 23 |
#define SAA7115_SVIDEO2 8 |
| 24 |
#define SAA7115_SVIDEO3 9 |
| 25 |
|
| 26 |
/* outputs */ |
| 27 |
#define SAA7115_IPORT_ON 1 |
| 28 |
#define SAA7115_IPORT_OFF 0 |
| 29 |
|
| 30 |
/* SAA7111 specific outputs. */ |
| 31 |
#define SAA7111_VBI_BYPASS 2 |
| 32 |
#define SAA7111_FMT_YUV422 0x00 |
| 33 |
#define SAA7111_FMT_RGB 0x40 |
| 34 |
#define SAA7111_FMT_CCIR 0x80 |
| 35 |
#define SAA7111_FMT_YUV411 0xc0 |
| 36 |
|
| 37 |
/* config flags */ |
| 38 |
/* |
| 39 |
* Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit |
| 40 |
* controls the IDQ signal polarity which is set to 'inverted' if the bit |
| 41 |
* it 1 and to 'default' if it is 0. |
| 42 |
*/ |
| 43 |
#define SAA7115_IDQ_IS_DEFAULT (1 << 0) |
| 44 |
|
| 45 |
/* s_crystal_freq values and flags */ |
| 46 |
|
| 47 |
/* SAA7115 v4l2_crystal_freq frequency values */ |
| 48 |
#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ |
| 49 |
#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ |
| 50 |
|
| 51 |
/* SAA7115 v4l2_crystal_freq audio clock control flags */ |
| 52 |
#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ |
| 53 |
#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ |
| 54 |
#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ |
| 55 |
#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ |
| 56 |
|
| 57 |
/* ===== SAA7113 Config enums ===== */ |
| 58 |
|
| 59 |
/* Register 0x08 "Horizontal time constant" [Bit 3..4]: |
| 60 |
* Should be set to "Fast Locking Mode" according to the datasheet, |
| 61 |
* and that is the default setting in the gm7113c_init table. |
| 62 |
* saa7113_init sets this value to "VTR Mode". */ |
| 63 |
enum saa7113_r08_htc { |
| 64 |
SAA7113_HTC_TV_MODE = 0x00, |
| 65 |
SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ |
| 66 |
SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ |
| 67 |
}; |
| 68 |
|
| 69 |
/* Register 0x10 "Output format selection" [Bit 6..7]: |
| 70 |
* Defaults to ITU_656 as specified in datasheet. */ |
| 71 |
enum saa7113_r10_ofts { |
| 72 |
SAA7113_OFTS_ITU_656 = 0x0, /* Default */ |
| 73 |
SAA7113_OFTS_VFLAG_BY_VREF, |
| 74 |
SAA7113_OFTS_VFLAG_BY_DATA_TYPE |
| 75 |
}; |
| 76 |
|
| 77 |
/* |
| 78 |
* Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: |
| 79 |
* This is used to select what data is output on the RTS0 and RTS1 pins. |
| 80 |
* RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) |
| 81 |
* RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified |
| 82 |
* in the datasheet, but is set to HREF_HS in the saa7113_init table. |
| 83 |
*/ |
| 84 |
enum saa7113_r12_rts { |
| 85 |
SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ |
| 86 |
SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ |
| 87 |
SAA7113_RTS_GPSW, |
| 88 |
SAA7115_RTS_HL, |
| 89 |
SAA7113_RTS_VL, |
| 90 |
SAA7113_RTS_DL, |
| 91 |
SAA7113_RTS_PLIN, |
| 92 |
SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ |
| 93 |
SAA7113_RTS_HS, |
| 94 |
SAA7113_RTS_HQ, |
| 95 |
SAA7113_RTS_ODD, |
| 96 |
SAA7113_RTS_VS, |
| 97 |
SAA7113_RTS_V123, |
| 98 |
SAA7113_RTS_VGATE, |
| 99 |
SAA7113_RTS_VREF, |
| 100 |
SAA7113_RTS_FID |
| 101 |
}; |
| 102 |
|
| 103 |
/** |
| 104 |
* struct saa7115_platform_data - Allow overriding default initialization |
| 105 |
* |
| 106 |
* @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table |
| 107 |
* instead of saa7113_init table |
| 108 |
* (saa7113 only) |
| 109 |
* @saa7113_r08_htc: [R_08 - Bit 3..4] |
| 110 |
* @saa7113_r10_vrln: [R_10 - Bit 3] |
| 111 |
* default: Disabled for gm7113c_init |
| 112 |
* Enabled for saa7113c_init |
| 113 |
* @saa7113_r10_ofts: [R_10 - Bit 6..7] |
| 114 |
* @saa7113_r12_rts0: [R_12 - Bit 0..3] |
| 115 |
* @saa7113_r12_rts1: [R_12 - Bit 4..7] |
| 116 |
* @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled |
| 117 |
*/ |
| 118 |
struct saa7115_platform_data { |
| 119 |
bool saa7113_force_gm7113c_init; |
| 120 |
enum saa7113_r08_htc *saa7113_r08_htc; |
| 121 |
bool *saa7113_r10_vrln; |
| 122 |
enum saa7113_r10_ofts *saa7113_r10_ofts; |
| 123 |
enum saa7113_r12_rts *saa7113_r12_rts0; |
| 124 |
enum saa7113_r12_rts *saa7113_r12_rts1; |
| 125 |
bool *saa7113_r13_adlsb; |
| 126 |
}; |
| 127 |
|
| 128 |
#endif |