| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* QNAP Turbo NAS Board power off. Can also be used on Synology devices. |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Andrew Lunn <[email protected]> |
| 6 |
* |
| 7 |
* Based on the code from: |
| 8 |
* |
| 9 |
* Copyright (C) 2009 Martin Michlmayr <[email protected]> |
| 10 |
* Copyright (C) 2008 Byron Bradley <[email protected]> |
| 11 |
*/ |
| 12 |
|
| 13 |
#include <linux/kernel.h> |
| 14 |
#include <linux/module.h> |
| 15 |
#include <linux/platform_device.h> |
| 16 |
#include <linux/serial_reg.h> |
| 17 |
#include <linux/of.h> |
| 18 |
#include <linux/io.h> |
| 19 |
#include <linux/clk.h> |
| 20 |
|
| 21 |
#define UART1_REG(x) (base + ((UART_##x) << 2)) |
| 22 |
|
| 23 |
struct power_off_cfg { |
| 24 |
u32 baud; |
| 25 |
char cmd; |
| 26 |
}; |
| 27 |
|
| 28 |
static const struct power_off_cfg qnap_power_off_cfg = { |
| 29 |
.baud = 19200, |
| 30 |
.cmd = 'A', |
| 31 |
}; |
| 32 |
|
| 33 |
static const struct power_off_cfg synology_power_off_cfg = { |
| 34 |
.baud = 9600, |
| 35 |
.cmd = '1', |
| 36 |
}; |
| 37 |
|
| 38 |
static const struct of_device_id qnap_power_off_of_match_table[] = { |
| 39 |
{ .compatible = "qnap,power-off", |
| 40 |
.data = &qnap_power_off_cfg, |
| 41 |
}, |
| 42 |
{ .compatible = "synology,power-off", |
| 43 |
.data = &synology_power_off_cfg, |
| 44 |
}, |
| 45 |
{} |
| 46 |
}; |
| 47 |
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); |
| 48 |
|
| 49 |
static void __iomem *base; |
| 50 |
static unsigned long tclk; |
| 51 |
static const struct power_off_cfg *cfg; |
| 52 |
|
| 53 |
static void qnap_power_off(void) |
| 54 |
{ |
| 55 |
const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud)); |
| 56 |
|
| 57 |
pr_err("%s: triggering power-off...\n", __func__); |
| 58 |
|
| 59 |
/* hijack UART1 and reset into sane state */ |
| 60 |
writel(0x83, UART1_REG(LCR)); |
| 61 |
writel(divisor & 0xff, UART1_REG(DLL)); |
| 62 |
writel((divisor >> 8) & 0xff, UART1_REG(DLM)); |
| 63 |
writel(0x03, UART1_REG(LCR)); |
| 64 |
writel(0x00, UART1_REG(IER)); |
| 65 |
writel(0x00, UART1_REG(FCR)); |
| 66 |
writel(0x00, UART1_REG(MCR)); |
| 67 |
|
| 68 |
/* send the power-off command to PIC */ |
| 69 |
writel(cfg->cmd, UART1_REG(TX)); |
| 70 |
} |
| 71 |
|
| 72 |
static int qnap_power_off_probe(struct platform_device *pdev) |
| 73 |
{ |
| 74 |
struct device_node *np = pdev->dev.of_node; |
| 75 |
struct resource *res; |
| 76 |
struct clk *clk; |
| 77 |
|
| 78 |
const struct of_device_id *match = |
| 79 |
of_match_node(qnap_power_off_of_match_table, np); |
| 80 |
cfg = match->data; |
| 81 |
|
| 82 |
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 83 |
if (!res) { |
| 84 |
dev_err(&pdev->dev, "Missing resource"); |
| 85 |
return -EINVAL; |
| 86 |
} |
| 87 |
|
| 88 |
base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| 89 |
if (!base) { |
| 90 |
dev_err(&pdev->dev, "Unable to map resource"); |
| 91 |
return -EINVAL; |
| 92 |
} |
| 93 |
|
| 94 |
/* We need to know tclk in order to calculate the UART divisor */ |
| 95 |
clk = devm_clk_get(&pdev->dev, NULL); |
| 96 |
if (IS_ERR(clk)) { |
| 97 |
dev_err(&pdev->dev, "Clk missing"); |
| 98 |
return PTR_ERR(clk); |
| 99 |
} |
| 100 |
|
| 101 |
tclk = clk_get_rate(clk); |
| 102 |
|
| 103 |
/* Check that nothing else has already setup a handler */ |
| 104 |
if (pm_power_off) { |
| 105 |
dev_err(&pdev->dev, "pm_power_off already claimed for %ps", |
| 106 |
pm_power_off); |
| 107 |
return -EBUSY; |
| 108 |
} |
| 109 |
pm_power_off = qnap_power_off; |
| 110 |
|
| 111 |
return 0; |
| 112 |
} |
| 113 |
|
| 114 |
static void qnap_power_off_remove(struct platform_device *pdev) |
| 115 |
{ |
| 116 |
pm_power_off = NULL; |
| 117 |
} |
| 118 |
|
| 119 |
static struct platform_driver qnap_power_off_driver = { |
| 120 |
.probe = qnap_power_off_probe, |
| 121 |
.remove = qnap_power_off_remove, |
| 122 |
.driver = { |
| 123 |
.name = "qnap_power_off", |
| 124 |
.of_match_table = of_match_ptr(qnap_power_off_of_match_table), |
| 125 |
}, |
| 126 |
}; |
| 127 |
module_platform_driver(qnap_power_off_driver); |
| 128 |
|
| 129 |
MODULE_AUTHOR("Andrew Lunn <[email protected]>"); |
| 130 |
MODULE_DESCRIPTION("QNAP Power off driver"); |
| 131 |
MODULE_LICENSE("GPL v2"); |