| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* LinkStation power off restart driver |
| 4 |
* Copyright (C) 2020 Daniel González Cabanelas <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <linux/module.h> |
| 8 |
#include <linux/notifier.h> |
| 9 |
#include <linux/of.h> |
| 10 |
#include <linux/of_mdio.h> |
| 11 |
#include <linux/of_platform.h> |
| 12 |
#include <linux/reboot.h> |
| 13 |
#include <linux/phy.h> |
| 14 |
|
| 15 |
/* Defines from the eth phy Marvell driver */ |
| 16 |
#define MII_MARVELL_COPPER_PAGE 0 |
| 17 |
#define MII_MARVELL_LED_PAGE 3 |
| 18 |
#define MII_MARVELL_WOL_PAGE 17 |
| 19 |
#define MII_MARVELL_PHY_PAGE 22 |
| 20 |
|
| 21 |
#define MII_PHY_LED_CTRL 16 |
| 22 |
#define MII_PHY_LED_POL_CTRL 17 |
| 23 |
#define MII_88E1318S_PHY_LED_TCR 18 |
| 24 |
#define MII_88E1318S_PHY_WOL_CTRL 16 |
| 25 |
#define MII_M1011_IEVENT 19 |
| 26 |
|
| 27 |
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) |
| 28 |
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) |
| 29 |
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) |
| 30 |
#define LED2_FORCE_ON (0x8 << 8) |
| 31 |
#define LEDMASK GENMASK(11,8) |
| 32 |
|
| 33 |
#define MII_88E1318S_PHY_LED_POL_LED2 BIT(4) |
| 34 |
|
| 35 |
struct power_off_cfg { |
| 36 |
char *mdio_node_name; |
| 37 |
void (*phy_set_reg)(bool restart); |
| 38 |
}; |
| 39 |
|
| 40 |
static struct phy_device *phydev; |
| 41 |
static const struct power_off_cfg *cfg; |
| 42 |
|
| 43 |
static void linkstation_mvphy_reg_intn(bool restart) |
| 44 |
{ |
| 45 |
int rc = 0, saved_page; |
| 46 |
u16 data = 0; |
| 47 |
|
| 48 |
if (restart) |
| 49 |
data = MII_88E1318S_PHY_LED_TCR_FORCE_INT; |
| 50 |
|
| 51 |
saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE); |
| 52 |
if (saved_page < 0) |
| 53 |
goto err; |
| 54 |
|
| 55 |
/* Force manual LED2 control to let INTn work */ |
| 56 |
__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON); |
| 57 |
|
| 58 |
/* Set the LED[2]/INTn pin to the required state */ |
| 59 |
__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR, |
| 60 |
MII_88E1318S_PHY_LED_TCR_FORCE_INT, |
| 61 |
MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data); |
| 62 |
|
| 63 |
if (!data) { |
| 64 |
/* Clear interrupts to ensure INTn won't be holded in high state */ |
| 65 |
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE); |
| 66 |
__phy_read(phydev, MII_M1011_IEVENT); |
| 67 |
|
| 68 |
/* If WOL was enabled and a magic packet was received before powering |
| 69 |
* off, we won't be able to wake up by sending another magic packet. |
| 70 |
* Clear WOL status. |
| 71 |
*/ |
| 72 |
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE); |
| 73 |
__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL, |
| 74 |
MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS); |
| 75 |
} |
| 76 |
err: |
| 77 |
rc = phy_restore_page(phydev, saved_page, rc); |
| 78 |
if (rc < 0) |
| 79 |
dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); |
| 80 |
} |
| 81 |
|
| 82 |
static void readynas_mvphy_set_reg(bool restart) |
| 83 |
{ |
| 84 |
int rc = 0, saved_page; |
| 85 |
u16 data = 0; |
| 86 |
|
| 87 |
if (restart) |
| 88 |
data = MII_88E1318S_PHY_LED_POL_LED2; |
| 89 |
|
| 90 |
saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE); |
| 91 |
if (saved_page < 0) |
| 92 |
goto err; |
| 93 |
|
| 94 |
/* Set the LED[2].0 Polarity bit to the required state */ |
| 95 |
__phy_modify(phydev, MII_PHY_LED_POL_CTRL, |
| 96 |
MII_88E1318S_PHY_LED_POL_LED2, data); |
| 97 |
|
| 98 |
if (!data) { |
| 99 |
/* If WOL was enabled and a magic packet was received before powering |
| 100 |
* off, we won't be able to wake up by sending another magic packet. |
| 101 |
* Clear WOL status. |
| 102 |
*/ |
| 103 |
__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE); |
| 104 |
__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL, |
| 105 |
MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS); |
| 106 |
} |
| 107 |
err: |
| 108 |
rc = phy_restore_page(phydev, saved_page, rc); |
| 109 |
if (rc < 0) |
| 110 |
dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); |
| 111 |
} |
| 112 |
|
| 113 |
static const struct power_off_cfg linkstation_power_off_cfg = { |
| 114 |
.mdio_node_name = "mdio", |
| 115 |
.phy_set_reg = linkstation_mvphy_reg_intn, |
| 116 |
}; |
| 117 |
|
| 118 |
static const struct power_off_cfg readynas_power_off_cfg = { |
| 119 |
.mdio_node_name = "mdio-bus", |
| 120 |
.phy_set_reg = readynas_mvphy_set_reg, |
| 121 |
}; |
| 122 |
|
| 123 |
static int linkstation_reboot_notifier(struct notifier_block *nb, |
| 124 |
unsigned long action, void *unused) |
| 125 |
{ |
| 126 |
if (action == SYS_RESTART) |
| 127 |
cfg->phy_set_reg(true); |
| 128 |
|
| 129 |
return NOTIFY_DONE; |
| 130 |
} |
| 131 |
|
| 132 |
static struct notifier_block linkstation_reboot_nb = { |
| 133 |
.notifier_call = linkstation_reboot_notifier, |
| 134 |
}; |
| 135 |
|
| 136 |
static void linkstation_poweroff(void) |
| 137 |
{ |
| 138 |
unregister_reboot_notifier(&linkstation_reboot_nb); |
| 139 |
cfg->phy_set_reg(false); |
| 140 |
|
| 141 |
kernel_restart("Power off"); |
| 142 |
} |
| 143 |
|
| 144 |
static const struct of_device_id ls_poweroff_of_match[] = { |
| 145 |
{ .compatible = "buffalo,ls421d", |
| 146 |
.data = &linkstation_power_off_cfg, |
| 147 |
}, |
| 148 |
{ .compatible = "buffalo,ls421de", |
| 149 |
.data = &linkstation_power_off_cfg, |
| 150 |
}, |
| 151 |
{ .compatible = "netgear,readynas-duo-v2", |
| 152 |
.data = &readynas_power_off_cfg, |
| 153 |
}, |
| 154 |
{ }, |
| 155 |
}; |
| 156 |
|
| 157 |
static int __init linkstation_poweroff_init(void) |
| 158 |
{ |
| 159 |
struct mii_bus *bus; |
| 160 |
struct device_node *dn; |
| 161 |
const struct of_device_id *match; |
| 162 |
|
| 163 |
dn = of_find_matching_node(NULL, ls_poweroff_of_match); |
| 164 |
if (!dn) |
| 165 |
return -ENODEV; |
| 166 |
of_node_put(dn); |
| 167 |
|
| 168 |
match = of_match_node(ls_poweroff_of_match, dn); |
| 169 |
cfg = match->data; |
| 170 |
|
| 171 |
dn = of_find_node_by_name(NULL, cfg->mdio_node_name); |
| 172 |
if (!dn) |
| 173 |
return -ENODEV; |
| 174 |
|
| 175 |
bus = of_mdio_find_bus(dn); |
| 176 |
of_node_put(dn); |
| 177 |
if (!bus) |
| 178 |
return -EPROBE_DEFER; |
| 179 |
|
| 180 |
phydev = phy_find_first(bus); |
| 181 |
put_device(&bus->dev); |
| 182 |
if (!phydev) |
| 183 |
return -EPROBE_DEFER; |
| 184 |
|
| 185 |
register_reboot_notifier(&linkstation_reboot_nb); |
| 186 |
pm_power_off = linkstation_poweroff; |
| 187 |
|
| 188 |
return 0; |
| 189 |
} |
| 190 |
|
| 191 |
static void __exit linkstation_poweroff_exit(void) |
| 192 |
{ |
| 193 |
pm_power_off = NULL; |
| 194 |
unregister_reboot_notifier(&linkstation_reboot_nb); |
| 195 |
} |
| 196 |
|
| 197 |
module_init(linkstation_poweroff_init); |
| 198 |
module_exit(linkstation_poweroff_exit); |
| 199 |
|
| 200 |
MODULE_AUTHOR("Daniel González Cabanelas <[email protected]>"); |
| 201 |
MODULE_DESCRIPTION("LinkStation power off driver"); |
| 202 |
MODULE_LICENSE("GPL v2"); |