| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
// Copyright (C) 2016 Broadcom |
| 3 |
|
| 4 |
#include <linux/io.h> |
| 5 |
#include <linux/mod_devicetable.h> |
| 6 |
#include <linux/platform_device.h> |
| 7 |
#include <linux/reboot.h> |
| 8 |
|
| 9 |
#define RSTMGR_REG_WR_ACCESS_OFFSET 0 |
| 10 |
#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4 |
| 11 |
|
| 12 |
#define RSTMGR_WR_PASSWORD 0xa5a5 |
| 13 |
#define RSTMGR_WR_PASSWORD_SHIFT 8 |
| 14 |
#define RSTMGR_WR_ACCESS_ENABLE 1 |
| 15 |
|
| 16 |
static void __iomem *kona_reset_base; |
| 17 |
|
| 18 |
static int kona_reset_handler(struct sys_off_data *data) |
| 19 |
{ |
| 20 |
/* |
| 21 |
* A soft reset is triggered by writing a 0 to bit 0 of the soft reset |
| 22 |
* register. To write to that register we must first write the password |
| 23 |
* and the enable bit in the write access enable register. |
| 24 |
*/ |
| 25 |
writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) | |
| 26 |
RSTMGR_WR_ACCESS_ENABLE, |
| 27 |
kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET); |
| 28 |
writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET); |
| 29 |
|
| 30 |
return NOTIFY_DONE; |
| 31 |
} |
| 32 |
|
| 33 |
static int kona_reset_probe(struct platform_device *pdev) |
| 34 |
{ |
| 35 |
kona_reset_base = devm_platform_ioremap_resource(pdev, 0); |
| 36 |
if (IS_ERR(kona_reset_base)) |
| 37 |
return PTR_ERR(kona_reset_base); |
| 38 |
|
| 39 |
return devm_register_sys_off_handler(&pdev->dev, SYS_OFF_MODE_RESTART, |
| 40 |
128, kona_reset_handler, NULL); |
| 41 |
} |
| 42 |
|
| 43 |
static const struct of_device_id of_match[] = { |
| 44 |
{ .compatible = "brcm,bcm21664-resetmgr" }, |
| 45 |
{}, |
| 46 |
}; |
| 47 |
|
| 48 |
static struct platform_driver bcm_kona_reset_driver = { |
| 49 |
.probe = kona_reset_probe, |
| 50 |
.driver = { |
| 51 |
.name = "brcm-kona-reset", |
| 52 |
.of_match_table = of_match, |
| 53 |
}, |
| 54 |
}; |
| 55 |
|
| 56 |
builtin_platform_driver(bcm_kona_reset_driver); |