| 1 |
/* |
| 2 |
* @section LICENSE |
| 3 |
* Copyright (c) 2014 Redpine Signals Inc. |
| 4 |
* |
| 5 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 6 |
* purpose with or without fee is hereby granted, provided that the above |
| 7 |
* copyright notice and this permission notice appear in all copies. |
| 8 |
* |
| 9 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 12 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 14 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 15 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 |
* |
| 17 |
*/ |
| 18 |
|
| 19 |
#ifndef __RSI_SDIO_INTF__ |
| 20 |
#define __RSI_SDIO_INTF__ |
| 21 |
|
| 22 |
#include <linux/mmc/card.h> |
| 23 |
#include <linux/mmc/mmc.h> |
| 24 |
#include <linux/mmc/host.h> |
| 25 |
#include <linux/mmc/sdio_func.h> |
| 26 |
#include <linux/mmc/sdio.h> |
| 27 |
#include <linux/mmc/sd.h> |
| 28 |
#include <linux/mmc/sdio_ids.h> |
| 29 |
#include "rsi_main.h" |
| 30 |
|
| 31 |
enum sdio_interrupt_type { |
| 32 |
BUFFER_FULL = 0x0, |
| 33 |
BUFFER_AVAILABLE = 0x2, |
| 34 |
FIRMWARE_ASSERT_IND = 0x3, |
| 35 |
MSDU_PACKET_PENDING = 0x4, |
| 36 |
UNKNOWN_INT = 0XE |
| 37 |
}; |
| 38 |
|
| 39 |
/* Buffer status register related info */ |
| 40 |
#define PKT_BUFF_SEMI_FULL 0 |
| 41 |
#define PKT_BUFF_FULL 1 |
| 42 |
#define PKT_MGMT_BUFF_FULL 2 |
| 43 |
#define MSDU_PKT_PENDING 3 |
| 44 |
#define RECV_NUM_BLOCKS 4 |
| 45 |
/* Interrupt Bit Related Macros */ |
| 46 |
#define PKT_BUFF_AVAILABLE 1 |
| 47 |
#define FW_ASSERT_IND 2 |
| 48 |
|
| 49 |
#define RSI_MASTER_REG_BUF_SIZE 12 |
| 50 |
|
| 51 |
#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3 |
| 52 |
#define RSI_FN1_INT_REGISTER 0xf9 |
| 53 |
#define RSI_INT_ENABLE_REGISTER 0x04 |
| 54 |
#define RSI_INT_ENABLE_MASK 0xfc |
| 55 |
#define RSI_SD_REQUEST_MASTER 0x10000 |
| 56 |
|
| 57 |
/* FOR SD CARD ONLY */ |
| 58 |
#define SDIO_RX_NUM_BLOCKS_REG 0x000F1 |
| 59 |
#define SDIO_FW_STATUS_REG 0x000F2 |
| 60 |
#define SDIO_NXT_RD_DELAY2 0x000F5 |
| 61 |
#define SDIO_MASTER_ACCESS_MSBYTE 0x000FA |
| 62 |
#define SDIO_MASTER_ACCESS_LSBYTE 0x000FB |
| 63 |
#define SDIO_READ_START_LVL 0x000FC |
| 64 |
#define SDIO_READ_FIFO_CTL 0x000FD |
| 65 |
#define SDIO_WRITE_FIFO_CTL 0x000FE |
| 66 |
#define SDIO_WAKEUP_REG 0x000FF |
| 67 |
#define SDIO_FUN1_INTR_CLR_REG 0x0008 |
| 68 |
#define SDIO_REG_HIGH_SPEED 0x0013 |
| 69 |
|
| 70 |
#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE) \ |
| 71 |
{ \ |
| 72 |
TYPE = \ |
| 73 |
(_I & (1 << PKT_BUFF_AVAILABLE)) ? \ |
| 74 |
BUFFER_AVAILABLE : \ |
| 75 |
(_I & (1 << MSDU_PKT_PENDING)) ? \ |
| 76 |
MSDU_PACKET_PENDING : \ |
| 77 |
(_I & (1 << FW_ASSERT_IND)) ? \ |
| 78 |
FIRMWARE_ASSERT_IND : UNKNOWN_INT; \ |
| 79 |
} |
| 80 |
|
| 81 |
/* common registers in SDIO function1 */ |
| 82 |
#define TA_SOFT_RESET_REG 0x0004 |
| 83 |
#define TA_TH0_PC_REG 0x0400 |
| 84 |
#define TA_HOLD_THREAD_REG 0x0844 |
| 85 |
#define TA_RELEASE_THREAD_REG 0x0848 |
| 86 |
|
| 87 |
#define TA_SOFT_RST_CLR 0 |
| 88 |
#define TA_SOFT_RST_SET BIT(0) |
| 89 |
#define TA_PC_ZERO 0 |
| 90 |
#define TA_HOLD_THREAD_VALUE 0xF |
| 91 |
#define TA_RELEASE_THREAD_VALUE 0xF |
| 92 |
#define TA_BASE_ADDR 0x2200 |
| 93 |
#define MISC_CFG_BASE_ADDR 0x4105 |
| 94 |
|
| 95 |
struct receive_info { |
| 96 |
bool buffer_full; |
| 97 |
bool semi_buffer_full; |
| 98 |
bool mgmt_buffer_full; |
| 99 |
u32 mgmt_buf_full_counter; |
| 100 |
u32 buf_semi_full_counter; |
| 101 |
u8 watch_bufferfull_count; |
| 102 |
u32 sdio_intr_status_zero; |
| 103 |
u32 sdio_int_counter; |
| 104 |
u32 total_sdio_msdu_pending_intr; |
| 105 |
u32 total_sdio_unknown_intr; |
| 106 |
u32 buf_full_counter; |
| 107 |
u32 buf_available_counter; |
| 108 |
}; |
| 109 |
|
| 110 |
struct rsi_91x_sdiodev { |
| 111 |
struct sdio_func *pfunction; |
| 112 |
struct task_struct *sdio_irq_task; |
| 113 |
struct receive_info rx_info; |
| 114 |
u32 next_read_delay; |
| 115 |
u32 sdio_high_speed_enable; |
| 116 |
u8 sdio_clock_speed; |
| 117 |
u32 cardcapability; |
| 118 |
u8 prev_desc[16]; |
| 119 |
u16 tx_blk_size; |
| 120 |
u8 write_fail; |
| 121 |
bool buff_status_updated; |
| 122 |
struct rsi_thread rx_thread; |
| 123 |
u8 pktbuffer[8192] __aligned(4); |
| 124 |
}; |
| 125 |
|
| 126 |
int rsi_init_sdio_slave_regs(struct rsi_hw *adapter); |
| 127 |
int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data); |
| 128 |
int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length); |
| 129 |
int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function, |
| 130 |
u32 addr, u8 *data); |
| 131 |
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr, |
| 132 |
u8 *data, u16 count); |
| 133 |
int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word); |
| 134 |
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit); |
| 135 |
int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter); |
| 136 |
int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num); |
| 137 |
void rsi_sdio_rx_thread(struct rsi_common *common); |
| 138 |
#endif |