| 1 |
/* |
| 2 |
* Copyright (c) 2014 Redpine Signals Inc. |
| 3 |
* |
| 4 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 5 |
* purpose with or without fee is hereby granted, provided that the above |
| 6 |
* copyright notice and this permission notice appear in all copies. |
| 7 |
* |
| 8 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 9 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 10 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 11 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 12 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 13 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 14 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 15 |
* |
| 16 |
*/ |
| 17 |
|
| 18 |
#include <linux/module.h> |
| 19 |
#include "rsi_sdio.h" |
| 20 |
#include "rsi_common.h" |
| 21 |
#include "rsi_coex.h" |
| 22 |
#include "rsi_hal.h" |
| 23 |
|
| 24 |
/* Default operating mode is wlan STA + BT */ |
| 25 |
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; |
| 26 |
module_param(dev_oper_mode, ushort, 0444); |
| 27 |
MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC); |
| 28 |
|
| 29 |
/** |
| 30 |
* rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg. |
| 31 |
* @rw: Read/write |
| 32 |
* @func: function number |
| 33 |
* @raw: indicates whether to perform read after write |
| 34 |
* @address: address to which to read/write |
| 35 |
* @writedata: data to write |
| 36 |
* |
| 37 |
* Return: argument |
| 38 |
*/ |
| 39 |
static u32 rsi_sdio_set_cmd52_arg(bool rw, |
| 40 |
u8 func, |
| 41 |
u8 raw, |
| 42 |
u32 address, |
| 43 |
u8 writedata) |
| 44 |
{ |
| 45 |
return ((rw & 1) << 31) | ((func & 0x7) << 28) | |
| 46 |
((raw & 1) << 27) | (1 << 26) | |
| 47 |
((address & 0x1FFFF) << 9) | (1 << 8) | |
| 48 |
(writedata & 0xFF); |
| 49 |
} |
| 50 |
|
| 51 |
/** |
| 52 |
* rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card. |
| 53 |
* @card: Pointer to the mmc_card. |
| 54 |
* @address: Address to write. |
| 55 |
* @byte: Data to write. |
| 56 |
* |
| 57 |
* Return: Write status. |
| 58 |
*/ |
| 59 |
static int rsi_cmd52writebyte(struct mmc_card *card, |
| 60 |
u32 address, |
| 61 |
u8 byte) |
| 62 |
{ |
| 63 |
struct mmc_command io_cmd; |
| 64 |
u32 arg; |
| 65 |
|
| 66 |
memset(&io_cmd, 0, sizeof(io_cmd)); |
| 67 |
arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte); |
| 68 |
io_cmd.opcode = SD_IO_RW_DIRECT; |
| 69 |
io_cmd.arg = arg; |
| 70 |
io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; |
| 71 |
|
| 72 |
return mmc_wait_for_cmd(card->host, &io_cmd, 0); |
| 73 |
} |
| 74 |
|
| 75 |
/** |
| 76 |
* rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card. |
| 77 |
* @card: Pointer to the mmc_card. |
| 78 |
* @address: Address to read from. |
| 79 |
* @byte: Variable to store read value. |
| 80 |
* |
| 81 |
* Return: Read status. |
| 82 |
*/ |
| 83 |
static int rsi_cmd52readbyte(struct mmc_card *card, |
| 84 |
u32 address, |
| 85 |
u8 *byte) |
| 86 |
{ |
| 87 |
struct mmc_command io_cmd; |
| 88 |
u32 arg; |
| 89 |
int err; |
| 90 |
|
| 91 |
memset(&io_cmd, 0, sizeof(io_cmd)); |
| 92 |
arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0); |
| 93 |
io_cmd.opcode = SD_IO_RW_DIRECT; |
| 94 |
io_cmd.arg = arg; |
| 95 |
io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; |
| 96 |
|
| 97 |
err = mmc_wait_for_cmd(card->host, &io_cmd, 0); |
| 98 |
if ((!err) && (byte)) |
| 99 |
*byte = io_cmd.resp[0] & 0xFF; |
| 100 |
return err; |
| 101 |
} |
| 102 |
|
| 103 |
/** |
| 104 |
* rsi_issue_sdiocommand() - This function issues sdio commands. |
| 105 |
* @func: Pointer to the sdio_func structure. |
| 106 |
* @opcode: Opcode value. |
| 107 |
* @arg: Arguments to pass. |
| 108 |
* @flags: Flags which are set. |
| 109 |
* @resp: Pointer to store response. |
| 110 |
* |
| 111 |
* Return: err: command status as 0 or -1. |
| 112 |
*/ |
| 113 |
static int rsi_issue_sdiocommand(struct sdio_func *func, |
| 114 |
u32 opcode, |
| 115 |
u32 arg, |
| 116 |
u32 flags, |
| 117 |
u32 *resp) |
| 118 |
{ |
| 119 |
struct mmc_command cmd; |
| 120 |
struct mmc_host *host; |
| 121 |
int err; |
| 122 |
|
| 123 |
host = func->card->host; |
| 124 |
|
| 125 |
memset(&cmd, 0, sizeof(struct mmc_command)); |
| 126 |
cmd.opcode = opcode; |
| 127 |
cmd.arg = arg; |
| 128 |
cmd.flags = flags; |
| 129 |
err = mmc_wait_for_cmd(host, &cmd, 3); |
| 130 |
|
| 131 |
if ((!err) && (resp)) |
| 132 |
*resp = cmd.resp[0]; |
| 133 |
|
| 134 |
return err; |
| 135 |
} |
| 136 |
|
| 137 |
/** |
| 138 |
* rsi_handle_interrupt() - This function is called upon the occurrence |
| 139 |
* of an interrupt. |
| 140 |
* @function: Pointer to the sdio_func structure. |
| 141 |
* |
| 142 |
* Return: None. |
| 143 |
*/ |
| 144 |
static void rsi_handle_interrupt(struct sdio_func *function) |
| 145 |
{ |
| 146 |
struct rsi_hw *adapter = sdio_get_drvdata(function); |
| 147 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 148 |
|
| 149 |
if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED) |
| 150 |
return; |
| 151 |
|
| 152 |
rsi_set_event(&dev->rx_thread.event); |
| 153 |
} |
| 154 |
|
| 155 |
/** |
| 156 |
* rsi_reset_card() - This function resets and re-initializes the card. |
| 157 |
* @pfunction: Pointer to the sdio_func structure. |
| 158 |
* |
| 159 |
* Return: None. |
| 160 |
*/ |
| 161 |
static void rsi_reset_card(struct sdio_func *pfunction) |
| 162 |
{ |
| 163 |
int ret = 0; |
| 164 |
int err; |
| 165 |
struct mmc_card *card = pfunction->card; |
| 166 |
struct mmc_host *host = card->host; |
| 167 |
u8 cmd52_resp; |
| 168 |
u32 clock, resp, i; |
| 169 |
u16 rca; |
| 170 |
|
| 171 |
/* Reset 9110 chip */ |
| 172 |
ret = rsi_cmd52writebyte(pfunction->card, |
| 173 |
SDIO_CCCR_ABORT, |
| 174 |
(1 << 3)); |
| 175 |
|
| 176 |
/* Card will not send any response as it is getting reset immediately |
| 177 |
* Hence expect a timeout status from host controller |
| 178 |
*/ |
| 179 |
if (ret != -ETIMEDOUT) |
| 180 |
rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret); |
| 181 |
|
| 182 |
/* Wait for few milli seconds to get rid of residue charges if any */ |
| 183 |
msleep(20); |
| 184 |
|
| 185 |
/* Initialize the SDIO card */ |
| 186 |
host->ios.chip_select = MMC_CS_DONTCARE; |
| 187 |
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; |
| 188 |
host->ios.power_mode = MMC_POWER_UP; |
| 189 |
host->ios.bus_width = MMC_BUS_WIDTH_1; |
| 190 |
host->ios.timing = MMC_TIMING_LEGACY; |
| 191 |
host->ops->set_ios(host, &host->ios); |
| 192 |
|
| 193 |
/* |
| 194 |
* This delay should be sufficient to allow the power supply |
| 195 |
* to reach the minimum voltage. |
| 196 |
*/ |
| 197 |
msleep(20); |
| 198 |
|
| 199 |
host->ios.clock = host->f_min; |
| 200 |
host->ios.power_mode = MMC_POWER_ON; |
| 201 |
host->ops->set_ios(host, &host->ios); |
| 202 |
|
| 203 |
/* |
| 204 |
* This delay must be at least 74 clock sizes, or 1 ms, or the |
| 205 |
* time required to reach a stable voltage. |
| 206 |
*/ |
| 207 |
msleep(20); |
| 208 |
|
| 209 |
/* Issue CMD0. Goto idle state */ |
| 210 |
host->ios.chip_select = MMC_CS_HIGH; |
| 211 |
host->ops->set_ios(host, &host->ios); |
| 212 |
msleep(20); |
| 213 |
err = rsi_issue_sdiocommand(pfunction, |
| 214 |
MMC_GO_IDLE_STATE, |
| 215 |
0, |
| 216 |
(MMC_RSP_NONE | MMC_CMD_BC), |
| 217 |
NULL); |
| 218 |
host->ios.chip_select = MMC_CS_DONTCARE; |
| 219 |
host->ops->set_ios(host, &host->ios); |
| 220 |
msleep(20); |
| 221 |
host->use_spi_crc = 0; |
| 222 |
|
| 223 |
if (err) |
| 224 |
rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err); |
| 225 |
|
| 226 |
/* Issue CMD5, arg = 0 */ |
| 227 |
err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 0, |
| 228 |
(MMC_RSP_R4 | MMC_CMD_BCR), &resp); |
| 229 |
if (err) |
| 230 |
rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", |
| 231 |
__func__, err); |
| 232 |
card->ocr = resp; |
| 233 |
/* Issue CMD5, arg = ocr. Wait till card is ready */ |
| 234 |
for (i = 0; i < 100; i++) { |
| 235 |
err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, |
| 236 |
card->ocr, |
| 237 |
(MMC_RSP_R4 | MMC_CMD_BCR), &resp); |
| 238 |
if (err) { |
| 239 |
rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", |
| 240 |
__func__, err); |
| 241 |
break; |
| 242 |
} |
| 243 |
|
| 244 |
if (resp & MMC_CARD_BUSY) |
| 245 |
break; |
| 246 |
msleep(20); |
| 247 |
} |
| 248 |
|
| 249 |
if ((i == 100) || (err)) { |
| 250 |
rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n", |
| 251 |
__func__, i, err); |
| 252 |
return; |
| 253 |
} |
| 254 |
|
| 255 |
/* Issue CMD3, get RCA */ |
| 256 |
err = rsi_issue_sdiocommand(pfunction, |
| 257 |
SD_SEND_RELATIVE_ADDR, |
| 258 |
0, |
| 259 |
(MMC_RSP_R6 | MMC_CMD_BCR), |
| 260 |
&resp); |
| 261 |
if (err) { |
| 262 |
rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err); |
| 263 |
return; |
| 264 |
} |
| 265 |
rca = resp >> 16; |
| 266 |
host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; |
| 267 |
host->ops->set_ios(host, &host->ios); |
| 268 |
|
| 269 |
/* Issue CMD7, select card */ |
| 270 |
err = rsi_issue_sdiocommand(pfunction, |
| 271 |
MMC_SELECT_CARD, |
| 272 |
(rca << 16), |
| 273 |
(MMC_RSP_R1 | MMC_CMD_AC), |
| 274 |
NULL); |
| 275 |
if (err) { |
| 276 |
rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err); |
| 277 |
return; |
| 278 |
} |
| 279 |
|
| 280 |
/* Enable high speed */ |
| 281 |
if (card->host->caps & MMC_CAP_SD_HIGHSPEED) { |
| 282 |
rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__); |
| 283 |
err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp); |
| 284 |
if (err) { |
| 285 |
rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n", |
| 286 |
__func__, err); |
| 287 |
} else { |
| 288 |
err = rsi_cmd52writebyte(card, |
| 289 |
SDIO_CCCR_SPEED, |
| 290 |
(cmd52_resp | SDIO_SPEED_EHS)); |
| 291 |
if (err) { |
| 292 |
rsi_dbg(ERR_ZONE, |
| 293 |
"%s: CCR speed regwrite failed %d\n", |
| 294 |
__func__, err); |
| 295 |
return; |
| 296 |
} |
| 297 |
host->ios.timing = MMC_TIMING_SD_HS; |
| 298 |
host->ops->set_ios(host, &host->ios); |
| 299 |
} |
| 300 |
} |
| 301 |
|
| 302 |
/* Set clock */ |
| 303 |
if (mmc_card_hs(card)) |
| 304 |
clock = 50000000; |
| 305 |
else |
| 306 |
clock = card->cis.max_dtr; |
| 307 |
|
| 308 |
if (clock > host->f_max) |
| 309 |
clock = host->f_max; |
| 310 |
|
| 311 |
host->ios.clock = clock; |
| 312 |
host->ops->set_ios(host, &host->ios); |
| 313 |
|
| 314 |
if (card->host->caps & MMC_CAP_4_BIT_DATA) { |
| 315 |
/* CMD52: Set bus width & disable card detect resistor */ |
| 316 |
err = rsi_cmd52writebyte(card, |
| 317 |
SDIO_CCCR_IF, |
| 318 |
(SDIO_BUS_CD_DISABLE | |
| 319 |
SDIO_BUS_WIDTH_4BIT)); |
| 320 |
if (err) { |
| 321 |
rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n", |
| 322 |
__func__, err); |
| 323 |
return; |
| 324 |
} |
| 325 |
host->ios.bus_width = MMC_BUS_WIDTH_4; |
| 326 |
host->ops->set_ios(host, &host->ios); |
| 327 |
} |
| 328 |
} |
| 329 |
|
| 330 |
/** |
| 331 |
* rsi_setclock() - This function sets the clock frequency. |
| 332 |
* @adapter: Pointer to the adapter structure. |
| 333 |
* @freq: Clock frequency. |
| 334 |
* |
| 335 |
* Return: None. |
| 336 |
*/ |
| 337 |
static void rsi_setclock(struct rsi_hw *adapter, u32 freq) |
| 338 |
{ |
| 339 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 340 |
struct mmc_host *host = dev->pfunction->card->host; |
| 341 |
u32 clock; |
| 342 |
|
| 343 |
clock = freq * 1000; |
| 344 |
if (clock > host->f_max) |
| 345 |
clock = host->f_max; |
| 346 |
host->ios.clock = clock; |
| 347 |
host->ops->set_ios(host, &host->ios); |
| 348 |
} |
| 349 |
|
| 350 |
/** |
| 351 |
* rsi_setblocklength() - This function sets the host block length. |
| 352 |
* @adapter: Pointer to the adapter structure. |
| 353 |
* @length: Block length to be set. |
| 354 |
* |
| 355 |
* Return: status: 0 on success, -1 on failure. |
| 356 |
*/ |
| 357 |
static int rsi_setblocklength(struct rsi_hw *adapter, u32 length) |
| 358 |
{ |
| 359 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 360 |
int status; |
| 361 |
rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__); |
| 362 |
|
| 363 |
status = sdio_set_block_size(dev->pfunction, length); |
| 364 |
dev->pfunction->max_blksize = 256; |
| 365 |
adapter->block_size = dev->pfunction->max_blksize; |
| 366 |
|
| 367 |
rsi_dbg(INFO_ZONE, |
| 368 |
"%s: Operational blk length is %d\n", __func__, length); |
| 369 |
return status; |
| 370 |
} |
| 371 |
|
| 372 |
/** |
| 373 |
* rsi_setupcard() - This function queries and sets the card's features. |
| 374 |
* @adapter: Pointer to the adapter structure. |
| 375 |
* |
| 376 |
* Return: status: 0 on success, -1 on failure. |
| 377 |
*/ |
| 378 |
static int rsi_setupcard(struct rsi_hw *adapter) |
| 379 |
{ |
| 380 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 381 |
int status = 0; |
| 382 |
|
| 383 |
rsi_setclock(adapter, 50000); |
| 384 |
|
| 385 |
dev->tx_blk_size = 256; |
| 386 |
status = rsi_setblocklength(adapter, dev->tx_blk_size); |
| 387 |
if (status) |
| 388 |
rsi_dbg(ERR_ZONE, |
| 389 |
"%s: Unable to set block length\n", __func__); |
| 390 |
return status; |
| 391 |
} |
| 392 |
|
| 393 |
/** |
| 394 |
* rsi_sdio_read_register() - This function reads one byte of information |
| 395 |
* from a register. |
| 396 |
* @adapter: Pointer to the adapter structure. |
| 397 |
* @addr: Address of the register. |
| 398 |
* @data: Pointer to the data that stores the data read. |
| 399 |
* |
| 400 |
* Return: 0 on success, -1 on failure. |
| 401 |
*/ |
| 402 |
int rsi_sdio_read_register(struct rsi_hw *adapter, |
| 403 |
u32 addr, |
| 404 |
u8 *data) |
| 405 |
{ |
| 406 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 407 |
u8 fun_num = 0; |
| 408 |
int status; |
| 409 |
|
| 410 |
if (likely(dev->sdio_irq_task != current)) |
| 411 |
sdio_claim_host(dev->pfunction); |
| 412 |
|
| 413 |
if (fun_num == 0) |
| 414 |
*data = sdio_f0_readb(dev->pfunction, addr, &status); |
| 415 |
else |
| 416 |
*data = sdio_readb(dev->pfunction, addr, &status); |
| 417 |
|
| 418 |
if (likely(dev->sdio_irq_task != current)) |
| 419 |
sdio_release_host(dev->pfunction); |
| 420 |
|
| 421 |
return status; |
| 422 |
} |
| 423 |
|
| 424 |
/** |
| 425 |
* rsi_sdio_write_register() - This function writes one byte of information |
| 426 |
* into a register. |
| 427 |
* @adapter: Pointer to the adapter structure. |
| 428 |
* @function: Function Number. |
| 429 |
* @addr: Address of the register. |
| 430 |
* @data: Pointer to the data tha has to be written. |
| 431 |
* |
| 432 |
* Return: 0 on success, -1 on failure. |
| 433 |
*/ |
| 434 |
int rsi_sdio_write_register(struct rsi_hw *adapter, |
| 435 |
u8 function, |
| 436 |
u32 addr, |
| 437 |
u8 *data) |
| 438 |
{ |
| 439 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 440 |
int status = 0; |
| 441 |
|
| 442 |
if (likely(dev->sdio_irq_task != current)) |
| 443 |
sdio_claim_host(dev->pfunction); |
| 444 |
|
| 445 |
if (function == 0) |
| 446 |
sdio_f0_writeb(dev->pfunction, *data, addr, &status); |
| 447 |
else |
| 448 |
sdio_writeb(dev->pfunction, *data, addr, &status); |
| 449 |
|
| 450 |
if (likely(dev->sdio_irq_task != current)) |
| 451 |
sdio_release_host(dev->pfunction); |
| 452 |
|
| 453 |
return status; |
| 454 |
} |
| 455 |
|
| 456 |
/** |
| 457 |
* rsi_sdio_ack_intr() - This function acks the interrupt received. |
| 458 |
* @adapter: Pointer to the adapter structure. |
| 459 |
* @int_bit: Interrupt bit to write into register. |
| 460 |
* |
| 461 |
* Return: None. |
| 462 |
*/ |
| 463 |
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit) |
| 464 |
{ |
| 465 |
int status; |
| 466 |
status = rsi_sdio_write_register(adapter, |
| 467 |
1, |
| 468 |
(SDIO_FUN1_INTR_CLR_REG | |
| 469 |
RSI_SD_REQUEST_MASTER), |
| 470 |
&int_bit); |
| 471 |
if (status) |
| 472 |
rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__); |
| 473 |
} |
| 474 |
|
| 475 |
|
| 476 |
|
| 477 |
/** |
| 478 |
* rsi_sdio_read_register_multiple() - This function read multiple bytes of |
| 479 |
* information from the SD card. |
| 480 |
* @adapter: Pointer to the adapter structure. |
| 481 |
* @addr: Address of the register. |
| 482 |
* @count: Number of multiple bytes to be read. |
| 483 |
* @data: Pointer to the read data. |
| 484 |
* |
| 485 |
* Return: 0 on success, -1 on failure. |
| 486 |
*/ |
| 487 |
static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter, |
| 488 |
u32 addr, |
| 489 |
u8 *data, |
| 490 |
u16 count) |
| 491 |
{ |
| 492 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 493 |
u32 status; |
| 494 |
|
| 495 |
if (likely(dev->sdio_irq_task != current)) |
| 496 |
sdio_claim_host(dev->pfunction); |
| 497 |
|
| 498 |
status = sdio_readsb(dev->pfunction, data, addr, count); |
| 499 |
|
| 500 |
if (likely(dev->sdio_irq_task != current)) |
| 501 |
sdio_release_host(dev->pfunction); |
| 502 |
|
| 503 |
if (status != 0) |
| 504 |
rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__); |
| 505 |
return status; |
| 506 |
} |
| 507 |
|
| 508 |
/** |
| 509 |
* rsi_sdio_write_register_multiple() - This function writes multiple bytes of |
| 510 |
* information to the SD card. |
| 511 |
* @adapter: Pointer to the adapter structure. |
| 512 |
* @addr: Address of the register. |
| 513 |
* @data: Pointer to the data that has to be written. |
| 514 |
* @count: Number of multiple bytes to be written. |
| 515 |
* |
| 516 |
* Return: 0 on success, -1 on failure. |
| 517 |
*/ |
| 518 |
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, |
| 519 |
u32 addr, |
| 520 |
u8 *data, |
| 521 |
u16 count) |
| 522 |
{ |
| 523 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 524 |
int status; |
| 525 |
|
| 526 |
if (dev->write_fail > 1) { |
| 527 |
rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__); |
| 528 |
return 0; |
| 529 |
} else if (dev->write_fail == 1) { |
| 530 |
/** |
| 531 |
* Assuming it is a CRC failure, we want to allow another |
| 532 |
* card write |
| 533 |
*/ |
| 534 |
rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__); |
| 535 |
dev->write_fail++; |
| 536 |
} |
| 537 |
|
| 538 |
if (likely(dev->sdio_irq_task != current)) |
| 539 |
sdio_claim_host(dev->pfunction); |
| 540 |
|
| 541 |
status = sdio_writesb(dev->pfunction, addr, data, count); |
| 542 |
|
| 543 |
if (likely(dev->sdio_irq_task != current)) |
| 544 |
sdio_release_host(dev->pfunction); |
| 545 |
|
| 546 |
if (status) { |
| 547 |
rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n", |
| 548 |
__func__, status); |
| 549 |
dev->write_fail = 2; |
| 550 |
} else { |
| 551 |
memcpy(dev->prev_desc, data, FRAME_DESC_SZ); |
| 552 |
} |
| 553 |
return status; |
| 554 |
} |
| 555 |
|
| 556 |
static int rsi_sdio_load_data_master_write(struct rsi_hw *adapter, |
| 557 |
u32 base_address, |
| 558 |
u32 instructions_sz, |
| 559 |
u16 block_size, |
| 560 |
u8 *ta_firmware) |
| 561 |
{ |
| 562 |
u32 num_blocks, offset, i; |
| 563 |
u16 msb_address, lsb_address; |
| 564 |
u8 *temp_buf; |
| 565 |
int status; |
| 566 |
|
| 567 |
num_blocks = instructions_sz / block_size; |
| 568 |
msb_address = base_address >> 16; |
| 569 |
|
| 570 |
rsi_dbg(INFO_ZONE, "ins_size: %d, num_blocks: %d\n", |
| 571 |
instructions_sz, num_blocks); |
| 572 |
|
| 573 |
temp_buf = kmalloc(block_size, GFP_KERNEL); |
| 574 |
if (!temp_buf) |
| 575 |
return -ENOMEM; |
| 576 |
|
| 577 |
/* Loading DM ms word in the sdio slave */ |
| 578 |
status = rsi_sdio_master_access_msword(adapter, msb_address); |
| 579 |
if (status < 0) { |
| 580 |
rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__); |
| 581 |
goto out_free; |
| 582 |
} |
| 583 |
|
| 584 |
for (offset = 0, i = 0; i < num_blocks; i++, offset += block_size) { |
| 585 |
memcpy(temp_buf, ta_firmware + offset, block_size); |
| 586 |
lsb_address = (u16)base_address; |
| 587 |
status = rsi_sdio_write_register_multiple |
| 588 |
(adapter, |
| 589 |
lsb_address | RSI_SD_REQUEST_MASTER, |
| 590 |
temp_buf, block_size); |
| 591 |
if (status < 0) { |
| 592 |
rsi_dbg(ERR_ZONE, "%s: failed to write\n", __func__); |
| 593 |
goto out_free; |
| 594 |
} |
| 595 |
rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, i); |
| 596 |
base_address += block_size; |
| 597 |
|
| 598 |
if ((base_address >> 16) != msb_address) { |
| 599 |
msb_address += 1; |
| 600 |
|
| 601 |
/* Loading DM ms word in the sdio slave */ |
| 602 |
status = rsi_sdio_master_access_msword(adapter, |
| 603 |
msb_address); |
| 604 |
if (status < 0) { |
| 605 |
rsi_dbg(ERR_ZONE, |
| 606 |
"%s: Unable to set ms word reg\n", |
| 607 |
__func__); |
| 608 |
goto out_free; |
| 609 |
} |
| 610 |
} |
| 611 |
} |
| 612 |
|
| 613 |
if (instructions_sz % block_size) { |
| 614 |
memset(temp_buf, 0, block_size); |
| 615 |
memcpy(temp_buf, ta_firmware + offset, |
| 616 |
instructions_sz % block_size); |
| 617 |
lsb_address = (u16)base_address; |
| 618 |
status = rsi_sdio_write_register_multiple |
| 619 |
(adapter, |
| 620 |
lsb_address | RSI_SD_REQUEST_MASTER, |
| 621 |
temp_buf, |
| 622 |
instructions_sz % block_size); |
| 623 |
if (status < 0) |
| 624 |
goto out_free; |
| 625 |
rsi_dbg(INFO_ZONE, |
| 626 |
"Written Last Block in Address 0x%x Successfully\n", |
| 627 |
offset | RSI_SD_REQUEST_MASTER); |
| 628 |
} |
| 629 |
|
| 630 |
status = 0; |
| 631 |
out_free: |
| 632 |
kfree(temp_buf); |
| 633 |
return status; |
| 634 |
} |
| 635 |
|
| 636 |
#define FLASH_SIZE_ADDR 0x04000016 |
| 637 |
static int rsi_sdio_master_reg_read(struct rsi_hw *adapter, u32 addr, |
| 638 |
u32 *read_buf, u16 size) |
| 639 |
{ |
| 640 |
u32 addr_on_bus, *data; |
| 641 |
u16 ms_addr; |
| 642 |
int status; |
| 643 |
|
| 644 |
data = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL); |
| 645 |
if (!data) |
| 646 |
return -ENOMEM; |
| 647 |
|
| 648 |
ms_addr = (addr >> 16); |
| 649 |
status = rsi_sdio_master_access_msword(adapter, ms_addr); |
| 650 |
if (status < 0) { |
| 651 |
rsi_dbg(ERR_ZONE, |
| 652 |
"%s: Unable to set ms word to common reg\n", |
| 653 |
__func__); |
| 654 |
goto err; |
| 655 |
} |
| 656 |
addr &= 0xFFFF; |
| 657 |
|
| 658 |
addr_on_bus = (addr & 0xFF000000); |
| 659 |
if ((addr_on_bus == (FLASH_SIZE_ADDR & 0xFF000000)) || |
| 660 |
(addr_on_bus == 0x0)) |
| 661 |
addr_on_bus = (addr & ~(0x3)); |
| 662 |
else |
| 663 |
addr_on_bus = addr; |
| 664 |
|
| 665 |
/* Bring TA out of reset */ |
| 666 |
status = rsi_sdio_read_register_multiple |
| 667 |
(adapter, |
| 668 |
(addr_on_bus | RSI_SD_REQUEST_MASTER), |
| 669 |
(u8 *)data, 4); |
| 670 |
if (status < 0) { |
| 671 |
rsi_dbg(ERR_ZONE, "%s: AHB register read failed\n", __func__); |
| 672 |
goto err; |
| 673 |
} |
| 674 |
if (size == 2) { |
| 675 |
if ((addr & 0x3) == 0) |
| 676 |
*read_buf = *data; |
| 677 |
else |
| 678 |
*read_buf = (*data >> 16); |
| 679 |
*read_buf = (*read_buf & 0xFFFF); |
| 680 |
} else if (size == 1) { |
| 681 |
if ((addr & 0x3) == 0) |
| 682 |
*read_buf = *data; |
| 683 |
else if ((addr & 0x3) == 1) |
| 684 |
*read_buf = (*data >> 8); |
| 685 |
else if ((addr & 0x3) == 2) |
| 686 |
*read_buf = (*data >> 16); |
| 687 |
else |
| 688 |
*read_buf = (*data >> 24); |
| 689 |
*read_buf = (*read_buf & 0xFF); |
| 690 |
} else { |
| 691 |
*read_buf = *data; |
| 692 |
} |
| 693 |
|
| 694 |
err: |
| 695 |
kfree(data); |
| 696 |
return status; |
| 697 |
} |
| 698 |
|
| 699 |
static int rsi_sdio_master_reg_write(struct rsi_hw *adapter, |
| 700 |
unsigned long addr, |
| 701 |
unsigned long data, u16 size) |
| 702 |
{ |
| 703 |
unsigned long *data_aligned; |
| 704 |
int status; |
| 705 |
|
| 706 |
data_aligned = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL); |
| 707 |
if (!data_aligned) |
| 708 |
return -ENOMEM; |
| 709 |
|
| 710 |
if (size == 2) { |
| 711 |
*data_aligned = ((data << 16) | (data & 0xFFFF)); |
| 712 |
} else if (size == 1) { |
| 713 |
u32 temp_data = data & 0xFF; |
| 714 |
|
| 715 |
*data_aligned = ((temp_data << 24) | (temp_data << 16) | |
| 716 |
(temp_data << 8) | temp_data); |
| 717 |
} else { |
| 718 |
*data_aligned = data; |
| 719 |
} |
| 720 |
size = 4; |
| 721 |
|
| 722 |
status = rsi_sdio_master_access_msword(adapter, (addr >> 16)); |
| 723 |
if (status < 0) { |
| 724 |
rsi_dbg(ERR_ZONE, |
| 725 |
"%s: Unable to set ms word to common reg\n", |
| 726 |
__func__); |
| 727 |
kfree(data_aligned); |
| 728 |
return -EIO; |
| 729 |
} |
| 730 |
addr = addr & 0xFFFF; |
| 731 |
|
| 732 |
/* Bring TA out of reset */ |
| 733 |
status = rsi_sdio_write_register_multiple |
| 734 |
(adapter, |
| 735 |
(addr | RSI_SD_REQUEST_MASTER), |
| 736 |
(u8 *)data_aligned, size); |
| 737 |
if (status < 0) |
| 738 |
rsi_dbg(ERR_ZONE, |
| 739 |
"%s: Unable to do AHB reg write\n", __func__); |
| 740 |
|
| 741 |
kfree(data_aligned); |
| 742 |
return status; |
| 743 |
} |
| 744 |
|
| 745 |
/** |
| 746 |
* rsi_sdio_host_intf_write_pkt() - This function writes the packet to device. |
| 747 |
* @adapter: Pointer to the adapter structure. |
| 748 |
* @pkt: Pointer to the data to be written on to the device. |
| 749 |
* @len: length of the data to be written on to the device. |
| 750 |
* |
| 751 |
* Return: 0 on success, -1 on failure. |
| 752 |
*/ |
| 753 |
static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, |
| 754 |
u8 *pkt, |
| 755 |
u32 len) |
| 756 |
{ |
| 757 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 758 |
u32 block_size = dev->tx_blk_size; |
| 759 |
u32 num_blocks, address, length; |
| 760 |
u32 queueno; |
| 761 |
int status; |
| 762 |
|
| 763 |
queueno = ((pkt[1] >> 4) & 0xf); |
| 764 |
if (queueno == RSI_BT_MGMT_Q || queueno == RSI_BT_DATA_Q) |
| 765 |
queueno = RSI_BT_Q; |
| 766 |
|
| 767 |
num_blocks = len / block_size; |
| 768 |
|
| 769 |
if (len % block_size) |
| 770 |
num_blocks++; |
| 771 |
|
| 772 |
address = (num_blocks * block_size | (queueno << 12)); |
| 773 |
length = num_blocks * block_size; |
| 774 |
|
| 775 |
status = rsi_sdio_write_register_multiple(adapter, |
| 776 |
address, |
| 777 |
(u8 *)pkt, |
| 778 |
length); |
| 779 |
if (status) |
| 780 |
rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n", |
| 781 |
__func__, status); |
| 782 |
rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__); |
| 783 |
return status; |
| 784 |
} |
| 785 |
|
| 786 |
/** |
| 787 |
* rsi_sdio_host_intf_read_pkt() - This function reads the packet |
| 788 |
* from the device. |
| 789 |
* @adapter: Pointer to the adapter data structure. |
| 790 |
* @pkt: Pointer to the packet data to be read from the device. |
| 791 |
* @length: Length of the data to be read from the device. |
| 792 |
* |
| 793 |
* Return: 0 on success, -1 on failure. |
| 794 |
*/ |
| 795 |
int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, |
| 796 |
u8 *pkt, |
| 797 |
u32 length) |
| 798 |
{ |
| 799 |
int status = -EINVAL; |
| 800 |
|
| 801 |
if (!length) { |
| 802 |
rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__); |
| 803 |
return status; |
| 804 |
} |
| 805 |
|
| 806 |
status = rsi_sdio_read_register_multiple(adapter, |
| 807 |
length, |
| 808 |
(u8 *)pkt, |
| 809 |
length); /*num of bytes*/ |
| 810 |
|
| 811 |
if (status) |
| 812 |
rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__, |
| 813 |
status); |
| 814 |
return status; |
| 815 |
} |
| 816 |
|
| 817 |
/** |
| 818 |
* rsi_init_sdio_interface() - This function does init specific to SDIO. |
| 819 |
* |
| 820 |
* @adapter: Pointer to the adapter data structure. |
| 821 |
* @pfunction: Pointer to the sdio_func structure. |
| 822 |
* |
| 823 |
* Return: 0 on success, -1 on failure. |
| 824 |
*/ |
| 825 |
static int rsi_init_sdio_interface(struct rsi_hw *adapter, |
| 826 |
struct sdio_func *pfunction) |
| 827 |
{ |
| 828 |
struct rsi_91x_sdiodev *rsi_91x_dev; |
| 829 |
int status; |
| 830 |
|
| 831 |
rsi_91x_dev = kzalloc_obj(*rsi_91x_dev); |
| 832 |
if (!rsi_91x_dev) |
| 833 |
return -ENOMEM; |
| 834 |
|
| 835 |
adapter->rsi_dev = rsi_91x_dev; |
| 836 |
|
| 837 |
sdio_claim_host(pfunction); |
| 838 |
|
| 839 |
pfunction->enable_timeout = 100; |
| 840 |
status = sdio_enable_func(pfunction); |
| 841 |
if (status) { |
| 842 |
rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__); |
| 843 |
sdio_release_host(pfunction); |
| 844 |
return status; |
| 845 |
} |
| 846 |
|
| 847 |
rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); |
| 848 |
|
| 849 |
rsi_91x_dev->pfunction = pfunction; |
| 850 |
adapter->device = &pfunction->dev; |
| 851 |
|
| 852 |
sdio_set_drvdata(pfunction, adapter); |
| 853 |
|
| 854 |
status = rsi_setupcard(adapter); |
| 855 |
if (status) { |
| 856 |
rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__); |
| 857 |
goto fail; |
| 858 |
} |
| 859 |
|
| 860 |
rsi_dbg(INIT_ZONE, "%s: Setup card successfully\n", __func__); |
| 861 |
|
| 862 |
status = rsi_init_sdio_slave_regs(adapter); |
| 863 |
if (status) { |
| 864 |
rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__); |
| 865 |
goto fail; |
| 866 |
} |
| 867 |
sdio_release_host(pfunction); |
| 868 |
|
| 869 |
adapter->determine_event_timeout = rsi_sdio_determine_event_timeout; |
| 870 |
adapter->check_hw_queue_status = rsi_sdio_check_buffer_status; |
| 871 |
|
| 872 |
#ifdef CONFIG_RSI_DEBUGFS |
| 873 |
adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES; |
| 874 |
#endif |
| 875 |
return 0; |
| 876 |
fail: |
| 877 |
sdio_disable_func(pfunction); |
| 878 |
sdio_release_host(pfunction); |
| 879 |
return status; |
| 880 |
} |
| 881 |
|
| 882 |
static int rsi_sdio_reinit_device(struct rsi_hw *adapter) |
| 883 |
{ |
| 884 |
struct rsi_91x_sdiodev *sdev = adapter->rsi_dev; |
| 885 |
struct sdio_func *pfunction = sdev->pfunction; |
| 886 |
int ii; |
| 887 |
|
| 888 |
for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) |
| 889 |
skb_queue_purge(&adapter->priv->tx_queue[ii]); |
| 890 |
|
| 891 |
/* Initialize device again */ |
| 892 |
sdio_claim_host(pfunction); |
| 893 |
|
| 894 |
sdio_release_irq(pfunction); |
| 895 |
rsi_reset_card(pfunction); |
| 896 |
|
| 897 |
sdio_enable_func(pfunction); |
| 898 |
rsi_setupcard(adapter); |
| 899 |
rsi_init_sdio_slave_regs(adapter); |
| 900 |
sdio_claim_irq(pfunction, rsi_handle_interrupt); |
| 901 |
rsi_hal_device_init(adapter); |
| 902 |
|
| 903 |
sdio_release_host(pfunction); |
| 904 |
|
| 905 |
return 0; |
| 906 |
} |
| 907 |
|
| 908 |
static int rsi_sdio_ta_reset(struct rsi_hw *adapter) |
| 909 |
{ |
| 910 |
int status; |
| 911 |
u32 addr; |
| 912 |
u8 *data; |
| 913 |
|
| 914 |
data = kzalloc(RSI_9116_REG_SIZE, GFP_KERNEL); |
| 915 |
if (!data) |
| 916 |
return -ENOMEM; |
| 917 |
|
| 918 |
status = rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR); |
| 919 |
if (status < 0) { |
| 920 |
rsi_dbg(ERR_ZONE, |
| 921 |
"Unable to set ms word to common reg\n"); |
| 922 |
goto err; |
| 923 |
} |
| 924 |
|
| 925 |
rsi_dbg(INIT_ZONE, "%s: Bring TA out of reset\n", __func__); |
| 926 |
put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); |
| 927 |
addr = TA_HOLD_THREAD_REG | RSI_SD_REQUEST_MASTER; |
| 928 |
status = rsi_sdio_write_register_multiple(adapter, addr, |
| 929 |
(u8 *)data, |
| 930 |
RSI_9116_REG_SIZE); |
| 931 |
if (status < 0) { |
| 932 |
rsi_dbg(ERR_ZONE, "Unable to hold TA threads\n"); |
| 933 |
goto err; |
| 934 |
} |
| 935 |
|
| 936 |
put_unaligned_le32(TA_SOFT_RST_CLR, data); |
| 937 |
addr = TA_SOFT_RESET_REG | RSI_SD_REQUEST_MASTER; |
| 938 |
status = rsi_sdio_write_register_multiple(adapter, addr, |
| 939 |
(u8 *)data, |
| 940 |
RSI_9116_REG_SIZE); |
| 941 |
if (status < 0) { |
| 942 |
rsi_dbg(ERR_ZONE, "Unable to get TA out of reset\n"); |
| 943 |
goto err; |
| 944 |
} |
| 945 |
|
| 946 |
put_unaligned_le32(TA_PC_ZERO, data); |
| 947 |
addr = TA_TH0_PC_REG | RSI_SD_REQUEST_MASTER; |
| 948 |
status = rsi_sdio_write_register_multiple(adapter, addr, |
| 949 |
(u8 *)data, |
| 950 |
RSI_9116_REG_SIZE); |
| 951 |
if (status < 0) { |
| 952 |
rsi_dbg(ERR_ZONE, "Unable to Reset TA PC value\n"); |
| 953 |
status = -EINVAL; |
| 954 |
goto err; |
| 955 |
} |
| 956 |
|
| 957 |
put_unaligned_le32(TA_RELEASE_THREAD_VALUE, data); |
| 958 |
addr = TA_RELEASE_THREAD_REG | RSI_SD_REQUEST_MASTER; |
| 959 |
status = rsi_sdio_write_register_multiple(adapter, addr, |
| 960 |
(u8 *)data, |
| 961 |
RSI_9116_REG_SIZE); |
| 962 |
if (status < 0) { |
| 963 |
rsi_dbg(ERR_ZONE, "Unable to release TA threads\n"); |
| 964 |
goto err; |
| 965 |
} |
| 966 |
|
| 967 |
status = rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR); |
| 968 |
if (status < 0) { |
| 969 |
rsi_dbg(ERR_ZONE, "Unable to set ms word to common reg\n"); |
| 970 |
goto err; |
| 971 |
} |
| 972 |
rsi_dbg(INIT_ZONE, "***** TA Reset done *****\n"); |
| 973 |
|
| 974 |
err: |
| 975 |
kfree(data); |
| 976 |
return status; |
| 977 |
} |
| 978 |
|
| 979 |
static struct rsi_host_intf_ops sdio_host_intf_ops = { |
| 980 |
.write_pkt = rsi_sdio_host_intf_write_pkt, |
| 981 |
.read_pkt = rsi_sdio_host_intf_read_pkt, |
| 982 |
.master_access_msword = rsi_sdio_master_access_msword, |
| 983 |
.read_reg_multiple = rsi_sdio_read_register_multiple, |
| 984 |
.write_reg_multiple = rsi_sdio_write_register_multiple, |
| 985 |
.master_reg_read = rsi_sdio_master_reg_read, |
| 986 |
.master_reg_write = rsi_sdio_master_reg_write, |
| 987 |
.load_data_master_write = rsi_sdio_load_data_master_write, |
| 988 |
.reinit_device = rsi_sdio_reinit_device, |
| 989 |
.ta_reset = rsi_sdio_ta_reset, |
| 990 |
}; |
| 991 |
|
| 992 |
/** |
| 993 |
* rsi_probe() - This function is called by kernel when the driver provided |
| 994 |
* Vendor and device IDs are matched. All the initialization |
| 995 |
* work is done here. |
| 996 |
* @pfunction: Pointer to the sdio_func structure. |
| 997 |
* @id: Pointer to sdio_device_id structure. |
| 998 |
* |
| 999 |
* Return: 0 on success, 1 on failure. |
| 1000 |
*/ |
| 1001 |
static int rsi_probe(struct sdio_func *pfunction, |
| 1002 |
const struct sdio_device_id *id) |
| 1003 |
{ |
| 1004 |
struct rsi_hw *adapter; |
| 1005 |
struct rsi_91x_sdiodev *sdev; |
| 1006 |
int status = -EINVAL; |
| 1007 |
|
| 1008 |
rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); |
| 1009 |
|
| 1010 |
adapter = rsi_91x_init(dev_oper_mode); |
| 1011 |
if (!adapter) { |
| 1012 |
rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", |
| 1013 |
__func__); |
| 1014 |
return -EINVAL; |
| 1015 |
} |
| 1016 |
adapter->rsi_host_intf = RSI_HOST_INTF_SDIO; |
| 1017 |
adapter->host_intf_ops = &sdio_host_intf_ops; |
| 1018 |
|
| 1019 |
if (rsi_init_sdio_interface(adapter, pfunction)) { |
| 1020 |
rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n", |
| 1021 |
__func__); |
| 1022 |
status = -EIO; |
| 1023 |
goto fail_free_adapter; |
| 1024 |
} |
| 1025 |
|
| 1026 |
if (pfunction->device == SDIO_DEVICE_ID_RSI_9113) { |
| 1027 |
rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__); |
| 1028 |
adapter->device_model = RSI_DEV_9113; |
| 1029 |
} else if (pfunction->device == SDIO_DEVICE_ID_RSI_9116) { |
| 1030 |
rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__); |
| 1031 |
adapter->device_model = RSI_DEV_9116; |
| 1032 |
} else { |
| 1033 |
rsi_dbg(ERR_ZONE, |
| 1034 |
"%s: Unsupported RSI device id 0x%x\n", __func__, |
| 1035 |
pfunction->device); |
| 1036 |
goto fail_free_adapter; |
| 1037 |
} |
| 1038 |
|
| 1039 |
sdev = adapter->rsi_dev; |
| 1040 |
rsi_init_event(&sdev->rx_thread.event); |
| 1041 |
status = rsi_create_kthread(adapter->priv, &sdev->rx_thread, |
| 1042 |
rsi_sdio_rx_thread, "SDIO-RX-Thread"); |
| 1043 |
if (status) { |
| 1044 |
rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__); |
| 1045 |
goto fail_kill_thread; |
| 1046 |
} |
| 1047 |
|
| 1048 |
sdio_claim_host(pfunction); |
| 1049 |
if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) { |
| 1050 |
rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__); |
| 1051 |
sdio_release_host(pfunction); |
| 1052 |
status = -EIO; |
| 1053 |
goto fail_claim_irq; |
| 1054 |
} |
| 1055 |
sdio_release_host(pfunction); |
| 1056 |
rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__); |
| 1057 |
|
| 1058 |
if (rsi_hal_device_init(adapter)) { |
| 1059 |
rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__); |
| 1060 |
status = -EINVAL; |
| 1061 |
goto fail_dev_init; |
| 1062 |
} |
| 1063 |
rsi_dbg(INFO_ZONE, "===> RSI Device Init Done <===\n"); |
| 1064 |
|
| 1065 |
if (rsi_sdio_master_access_msword(adapter, MISC_CFG_BASE_ADDR)) { |
| 1066 |
rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__); |
| 1067 |
status = -EIO; |
| 1068 |
goto fail_dev_init; |
| 1069 |
} |
| 1070 |
|
| 1071 |
adapter->priv->hibernate_resume = false; |
| 1072 |
adapter->priv->reinit_hw = false; |
| 1073 |
return 0; |
| 1074 |
|
| 1075 |
fail_dev_init: |
| 1076 |
sdio_claim_host(pfunction); |
| 1077 |
sdio_release_irq(pfunction); |
| 1078 |
sdio_release_host(pfunction); |
| 1079 |
fail_claim_irq: |
| 1080 |
rsi_kill_thread(&sdev->rx_thread); |
| 1081 |
fail_kill_thread: |
| 1082 |
sdio_claim_host(pfunction); |
| 1083 |
sdio_disable_func(pfunction); |
| 1084 |
sdio_release_host(pfunction); |
| 1085 |
fail_free_adapter: |
| 1086 |
rsi_91x_deinit(adapter); |
| 1087 |
rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); |
| 1088 |
return status; |
| 1089 |
} |
| 1090 |
|
| 1091 |
static void ulp_read_write(struct rsi_hw *adapter, u16 addr, u32 data, |
| 1092 |
u16 len_in_bits) |
| 1093 |
{ |
| 1094 |
rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG1, |
| 1095 |
((addr << 6) | ((data >> 16) & 0xffff)), 2); |
| 1096 |
rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG0, |
| 1097 |
(data & 0xffff), 2); |
| 1098 |
rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG0, |
| 1099 |
RSI_GSPI_CTRL_REG0_VALUE, 2); |
| 1100 |
rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG1, |
| 1101 |
((len_in_bits - 1) | RSI_GSPI_TRIG), 2); |
| 1102 |
msleep(20); |
| 1103 |
} |
| 1104 |
|
| 1105 |
/*This function resets and re-initializes the chip.*/ |
| 1106 |
static void rsi_reset_chip(struct rsi_hw *adapter) |
| 1107 |
{ |
| 1108 |
u8 *data; |
| 1109 |
u8 sdio_interrupt_status = 0; |
| 1110 |
u8 request = 1; |
| 1111 |
int ret; |
| 1112 |
|
| 1113 |
data = kzalloc(sizeof(u32), GFP_KERNEL); |
| 1114 |
if (!data) |
| 1115 |
return; |
| 1116 |
|
| 1117 |
rsi_dbg(INFO_ZONE, "Writing disable to wakeup register\n"); |
| 1118 |
ret = rsi_sdio_write_register(adapter, 0, SDIO_WAKEUP_REG, &request); |
| 1119 |
if (ret < 0) { |
| 1120 |
rsi_dbg(ERR_ZONE, |
| 1121 |
"%s: Failed to write SDIO wakeup register\n", __func__); |
| 1122 |
goto err; |
| 1123 |
} |
| 1124 |
msleep(20); |
| 1125 |
ret = rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER, |
| 1126 |
&sdio_interrupt_status); |
| 1127 |
if (ret < 0) { |
| 1128 |
rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n", |
| 1129 |
__func__); |
| 1130 |
goto err; |
| 1131 |
} |
| 1132 |
rsi_dbg(INFO_ZONE, "%s: Intr Status Register value = %d\n", |
| 1133 |
__func__, sdio_interrupt_status); |
| 1134 |
|
| 1135 |
/* Put Thread-Arch processor on hold */ |
| 1136 |
if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { |
| 1137 |
rsi_dbg(ERR_ZONE, |
| 1138 |
"%s: Unable to set ms word to common reg\n", |
| 1139 |
__func__); |
| 1140 |
goto err; |
| 1141 |
} |
| 1142 |
|
| 1143 |
put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); |
| 1144 |
if (rsi_sdio_write_register_multiple(adapter, TA_HOLD_THREAD_REG | |
| 1145 |
RSI_SD_REQUEST_MASTER, |
| 1146 |
data, 4)) { |
| 1147 |
rsi_dbg(ERR_ZONE, |
| 1148 |
"%s: Unable to hold Thread-Arch processor threads\n", |
| 1149 |
__func__); |
| 1150 |
goto err; |
| 1151 |
} |
| 1152 |
|
| 1153 |
/* This msleep will ensure Thread-Arch processor to go to hold |
| 1154 |
* and any pending dma transfers to rf spi in device to finish. |
| 1155 |
*/ |
| 1156 |
msleep(100); |
| 1157 |
if (adapter->device_model != RSI_DEV_9116) { |
| 1158 |
ulp_read_write(adapter, RSI_ULP_RESET_REG, RSI_ULP_WRITE_0, 32); |
| 1159 |
ulp_read_write(adapter, |
| 1160 |
RSI_WATCH_DOG_TIMER_1, RSI_ULP_WRITE_2, 32); |
| 1161 |
ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_2, RSI_ULP_WRITE_0, |
| 1162 |
32); |
| 1163 |
ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_1, |
| 1164 |
RSI_ULP_WRITE_50, 32); |
| 1165 |
ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_2, |
| 1166 |
RSI_ULP_WRITE_0, 32); |
| 1167 |
ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_ENABLE, |
| 1168 |
RSI_ULP_TIMER_ENABLE, 32); |
| 1169 |
} else { |
| 1170 |
if ((rsi_sdio_master_reg_write(adapter, |
| 1171 |
NWP_WWD_INTERRUPT_TIMER, |
| 1172 |
NWP_WWD_INT_TIMER_CLKS, |
| 1173 |
RSI_9116_REG_SIZE)) < 0) { |
| 1174 |
rsi_dbg(ERR_ZONE, "Failed to write to intr timer\n"); |
| 1175 |
} |
| 1176 |
if ((rsi_sdio_master_reg_write(adapter, |
| 1177 |
NWP_WWD_SYSTEM_RESET_TIMER, |
| 1178 |
NWP_WWD_SYS_RESET_TIMER_CLKS, |
| 1179 |
RSI_9116_REG_SIZE)) < 0) { |
| 1180 |
rsi_dbg(ERR_ZONE, |
| 1181 |
"Failed to write to system reset timer\n"); |
| 1182 |
} |
| 1183 |
if ((rsi_sdio_master_reg_write(adapter, |
| 1184 |
NWP_WWD_MODE_AND_RSTART, |
| 1185 |
NWP_WWD_TIMER_DISABLE, |
| 1186 |
RSI_9116_REG_SIZE)) < 0) { |
| 1187 |
rsi_dbg(ERR_ZONE, |
| 1188 |
"Failed to write to mode and restart\n"); |
| 1189 |
} |
| 1190 |
rsi_dbg(ERR_ZONE, "***** Watch Dog Reset Successful *****\n"); |
| 1191 |
} |
| 1192 |
/* This msleep will be sufficient for the ulp |
| 1193 |
* read write operations to complete for chip reset. |
| 1194 |
*/ |
| 1195 |
msleep(500); |
| 1196 |
err: |
| 1197 |
kfree(data); |
| 1198 |
return; |
| 1199 |
} |
| 1200 |
|
| 1201 |
/** |
| 1202 |
* rsi_disconnect() - This function performs the reverse of the probe function. |
| 1203 |
* @pfunction: Pointer to the sdio_func structure. |
| 1204 |
* |
| 1205 |
* Return: void. |
| 1206 |
*/ |
| 1207 |
static void rsi_disconnect(struct sdio_func *pfunction) |
| 1208 |
{ |
| 1209 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1210 |
struct rsi_91x_sdiodev *dev; |
| 1211 |
|
| 1212 |
if (!adapter) |
| 1213 |
return; |
| 1214 |
|
| 1215 |
dev = adapter->rsi_dev; |
| 1216 |
|
| 1217 |
rsi_kill_thread(&dev->rx_thread); |
| 1218 |
sdio_claim_host(pfunction); |
| 1219 |
sdio_release_irq(pfunction); |
| 1220 |
sdio_release_host(pfunction); |
| 1221 |
mdelay(10); |
| 1222 |
|
| 1223 |
rsi_mac80211_detach(adapter); |
| 1224 |
mdelay(10); |
| 1225 |
|
| 1226 |
if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && |
| 1227 |
adapter->priv->bt_adapter) { |
| 1228 |
rsi_bt_ops.detach(adapter->priv->bt_adapter); |
| 1229 |
adapter->priv->bt_adapter = NULL; |
| 1230 |
} |
| 1231 |
|
| 1232 |
/* Reset Chip */ |
| 1233 |
rsi_reset_chip(adapter); |
| 1234 |
|
| 1235 |
/* Resetting to take care of the case, where-in driver is re-loaded */ |
| 1236 |
sdio_claim_host(pfunction); |
| 1237 |
rsi_reset_card(pfunction); |
| 1238 |
sdio_disable_func(pfunction); |
| 1239 |
sdio_release_host(pfunction); |
| 1240 |
dev->write_fail = 2; |
| 1241 |
rsi_91x_deinit(adapter); |
| 1242 |
rsi_dbg(ERR_ZONE, "##### RSI SDIO device disconnected #####\n"); |
| 1243 |
|
| 1244 |
} |
| 1245 |
|
| 1246 |
#ifdef CONFIG_PM |
| 1247 |
static int rsi_set_sdio_pm_caps(struct rsi_hw *adapter) |
| 1248 |
{ |
| 1249 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 1250 |
struct sdio_func *func = dev->pfunction; |
| 1251 |
int ret; |
| 1252 |
|
| 1253 |
ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| 1254 |
if (ret) |
| 1255 |
rsi_dbg(ERR_ZONE, "Set sdio keep pwr flag failed: %d\n", ret); |
| 1256 |
|
| 1257 |
return ret; |
| 1258 |
} |
| 1259 |
|
| 1260 |
static int rsi_sdio_disable_interrupts(struct sdio_func *pfunc) |
| 1261 |
{ |
| 1262 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunc); |
| 1263 |
u8 isr_status = 0, data = 0; |
| 1264 |
int ret; |
| 1265 |
unsigned long t1; |
| 1266 |
|
| 1267 |
rsi_dbg(INFO_ZONE, "Waiting for interrupts to be cleared.."); |
| 1268 |
t1 = jiffies; |
| 1269 |
do { |
| 1270 |
rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER, |
| 1271 |
&isr_status); |
| 1272 |
rsi_dbg(INFO_ZONE, "."); |
| 1273 |
} while ((isr_status) && (jiffies_to_msecs(jiffies - t1) < 20)); |
| 1274 |
rsi_dbg(INFO_ZONE, "Interrupts cleared\n"); |
| 1275 |
|
| 1276 |
sdio_claim_host(pfunc); |
| 1277 |
ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); |
| 1278 |
if (ret < 0) { |
| 1279 |
rsi_dbg(ERR_ZONE, |
| 1280 |
"%s: Failed to read int enable register\n", |
| 1281 |
__func__); |
| 1282 |
goto done; |
| 1283 |
} |
| 1284 |
|
| 1285 |
data &= RSI_INT_ENABLE_MASK; |
| 1286 |
ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data); |
| 1287 |
if (ret < 0) { |
| 1288 |
rsi_dbg(ERR_ZONE, |
| 1289 |
"%s: Failed to write to int enable register\n", |
| 1290 |
__func__); |
| 1291 |
goto done; |
| 1292 |
} |
| 1293 |
ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); |
| 1294 |
if (ret < 0) { |
| 1295 |
rsi_dbg(ERR_ZONE, |
| 1296 |
"%s: Failed to read int enable register\n", |
| 1297 |
__func__); |
| 1298 |
goto done; |
| 1299 |
} |
| 1300 |
rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data); |
| 1301 |
|
| 1302 |
done: |
| 1303 |
sdio_release_host(pfunc); |
| 1304 |
return ret; |
| 1305 |
} |
| 1306 |
|
| 1307 |
static int rsi_sdio_enable_interrupts(struct sdio_func *pfunc) |
| 1308 |
{ |
| 1309 |
u8 data; |
| 1310 |
int ret; |
| 1311 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunc); |
| 1312 |
struct rsi_common *common = adapter->priv; |
| 1313 |
|
| 1314 |
sdio_claim_host(pfunc); |
| 1315 |
ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); |
| 1316 |
if (ret < 0) { |
| 1317 |
rsi_dbg(ERR_ZONE, |
| 1318 |
"%s: Failed to read int enable register\n", __func__); |
| 1319 |
goto done; |
| 1320 |
} |
| 1321 |
|
| 1322 |
data |= ~RSI_INT_ENABLE_MASK & 0xff; |
| 1323 |
|
| 1324 |
ret = rsi_cmd52writebyte(pfunc->card, RSI_INT_ENABLE_REGISTER, data); |
| 1325 |
if (ret < 0) { |
| 1326 |
rsi_dbg(ERR_ZONE, |
| 1327 |
"%s: Failed to write to int enable register\n", |
| 1328 |
__func__); |
| 1329 |
goto done; |
| 1330 |
} |
| 1331 |
|
| 1332 |
if ((common->wow_flags & RSI_WOW_ENABLED) && |
| 1333 |
(common->wow_flags & RSI_WOW_NO_CONNECTION)) |
| 1334 |
rsi_dbg(ERR_ZONE, |
| 1335 |
"##### Device can not wake up through WLAN\n"); |
| 1336 |
|
| 1337 |
ret = rsi_cmd52readbyte(pfunc->card, RSI_INT_ENABLE_REGISTER, &data); |
| 1338 |
if (ret < 0) { |
| 1339 |
rsi_dbg(ERR_ZONE, |
| 1340 |
"%s: Failed to read int enable register\n", __func__); |
| 1341 |
goto done; |
| 1342 |
} |
| 1343 |
rsi_dbg(INFO_ZONE, "int enable reg content = %x\n", data); |
| 1344 |
|
| 1345 |
done: |
| 1346 |
sdio_release_host(pfunc); |
| 1347 |
return ret; |
| 1348 |
} |
| 1349 |
|
| 1350 |
static int rsi_suspend(struct device *dev) |
| 1351 |
{ |
| 1352 |
int ret; |
| 1353 |
struct sdio_func *pfunction = dev_to_sdio_func(dev); |
| 1354 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1355 |
struct rsi_common *common; |
| 1356 |
|
| 1357 |
if (!adapter) { |
| 1358 |
rsi_dbg(ERR_ZONE, "Device is not ready\n"); |
| 1359 |
return -ENODEV; |
| 1360 |
} |
| 1361 |
common = adapter->priv; |
| 1362 |
rsi_sdio_disable_interrupts(pfunction); |
| 1363 |
|
| 1364 |
ret = rsi_set_sdio_pm_caps(adapter); |
| 1365 |
if (ret) |
| 1366 |
rsi_dbg(INFO_ZONE, |
| 1367 |
"Setting power management caps failed\n"); |
| 1368 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 1369 |
|
| 1370 |
return 0; |
| 1371 |
} |
| 1372 |
|
| 1373 |
static int rsi_resume(struct device *dev) |
| 1374 |
{ |
| 1375 |
struct sdio_func *pfunction = dev_to_sdio_func(dev); |
| 1376 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1377 |
struct rsi_common *common = adapter->priv; |
| 1378 |
|
| 1379 |
common->fsm_state = FSM_MAC_INIT_DONE; |
| 1380 |
rsi_sdio_enable_interrupts(pfunction); |
| 1381 |
|
| 1382 |
return 0; |
| 1383 |
} |
| 1384 |
|
| 1385 |
static int rsi_freeze(struct device *dev) |
| 1386 |
{ |
| 1387 |
int ret; |
| 1388 |
struct sdio_func *pfunction = dev_to_sdio_func(dev); |
| 1389 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1390 |
struct rsi_common *common; |
| 1391 |
struct rsi_91x_sdiodev *sdev; |
| 1392 |
|
| 1393 |
rsi_dbg(INFO_ZONE, "SDIO Bus freeze ===>\n"); |
| 1394 |
|
| 1395 |
if (!adapter) { |
| 1396 |
rsi_dbg(ERR_ZONE, "Device is not ready\n"); |
| 1397 |
return -ENODEV; |
| 1398 |
} |
| 1399 |
common = adapter->priv; |
| 1400 |
sdev = adapter->rsi_dev; |
| 1401 |
|
| 1402 |
if ((common->wow_flags & RSI_WOW_ENABLED) && |
| 1403 |
(common->wow_flags & RSI_WOW_NO_CONNECTION)) |
| 1404 |
rsi_dbg(ERR_ZONE, |
| 1405 |
"##### Device can not wake up through WLAN\n"); |
| 1406 |
|
| 1407 |
if (IS_ENABLED(CONFIG_RSI_COEX) && common->coex_mode > 1 && |
| 1408 |
common->bt_adapter) { |
| 1409 |
rsi_bt_ops.detach(common->bt_adapter); |
| 1410 |
common->bt_adapter = NULL; |
| 1411 |
} |
| 1412 |
|
| 1413 |
ret = rsi_sdio_disable_interrupts(pfunction); |
| 1414 |
|
| 1415 |
if (sdev->write_fail) |
| 1416 |
rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n"); |
| 1417 |
|
| 1418 |
ret = rsi_set_sdio_pm_caps(adapter); |
| 1419 |
if (ret) |
| 1420 |
rsi_dbg(INFO_ZONE, "Setting power management caps failed\n"); |
| 1421 |
|
| 1422 |
rsi_dbg(INFO_ZONE, "***** RSI module freezed *****\n"); |
| 1423 |
|
| 1424 |
return 0; |
| 1425 |
} |
| 1426 |
|
| 1427 |
static int rsi_thaw(struct device *dev) |
| 1428 |
{ |
| 1429 |
struct sdio_func *pfunction = dev_to_sdio_func(dev); |
| 1430 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1431 |
struct rsi_common *common = adapter->priv; |
| 1432 |
|
| 1433 |
rsi_dbg(ERR_ZONE, "SDIO Bus thaw =====>\n"); |
| 1434 |
|
| 1435 |
common->hibernate_resume = true; |
| 1436 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 1437 |
common->iface_down = true; |
| 1438 |
|
| 1439 |
rsi_sdio_enable_interrupts(pfunction); |
| 1440 |
|
| 1441 |
rsi_dbg(INFO_ZONE, "***** RSI module thaw done *****\n"); |
| 1442 |
|
| 1443 |
return 0; |
| 1444 |
} |
| 1445 |
|
| 1446 |
static void rsi_shutdown(struct sdio_func *pfunction) |
| 1447 |
{ |
| 1448 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1449 |
struct rsi_91x_sdiodev *sdev = adapter->rsi_dev; |
| 1450 |
struct ieee80211_hw *hw = adapter->hw; |
| 1451 |
|
| 1452 |
rsi_dbg(ERR_ZONE, "SDIO Bus shutdown =====>\n"); |
| 1453 |
|
| 1454 |
if (hw && hw->wiphy && hw->wiphy->wowlan_config) { |
| 1455 |
if (rsi_config_wowlan(adapter, hw->wiphy->wowlan_config)) |
| 1456 |
rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n"); |
| 1457 |
} |
| 1458 |
|
| 1459 |
if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && |
| 1460 |
adapter->priv->bt_adapter) { |
| 1461 |
rsi_bt_ops.detach(adapter->priv->bt_adapter); |
| 1462 |
adapter->priv->bt_adapter = NULL; |
| 1463 |
} |
| 1464 |
|
| 1465 |
rsi_sdio_disable_interrupts(sdev->pfunction); |
| 1466 |
|
| 1467 |
if (sdev->write_fail) |
| 1468 |
rsi_dbg(INFO_ZONE, "###### Device is not ready #######\n"); |
| 1469 |
|
| 1470 |
rsi_dbg(INFO_ZONE, "***** RSI module shut down *****\n"); |
| 1471 |
} |
| 1472 |
|
| 1473 |
static int rsi_restore(struct device *dev) |
| 1474 |
{ |
| 1475 |
struct sdio_func *pfunction = dev_to_sdio_func(dev); |
| 1476 |
struct rsi_hw *adapter = sdio_get_drvdata(pfunction); |
| 1477 |
struct rsi_common *common = adapter->priv; |
| 1478 |
|
| 1479 |
rsi_dbg(INFO_ZONE, "SDIO Bus restore ======>\n"); |
| 1480 |
common->hibernate_resume = true; |
| 1481 |
common->fsm_state = FSM_FW_NOT_LOADED; |
| 1482 |
common->iface_down = true; |
| 1483 |
|
| 1484 |
adapter->sc_nvifs = 0; |
| 1485 |
adapter->ps_state = PS_NONE; |
| 1486 |
|
| 1487 |
common->wow_flags = 0; |
| 1488 |
common->iface_down = false; |
| 1489 |
|
| 1490 |
rsi_dbg(INFO_ZONE, "RSI module restored\n"); |
| 1491 |
|
| 1492 |
return 0; |
| 1493 |
} |
| 1494 |
static const struct dev_pm_ops rsi_pm_ops = { |
| 1495 |
.suspend = rsi_suspend, |
| 1496 |
.resume_noirq = rsi_resume, |
| 1497 |
.freeze = rsi_freeze, |
| 1498 |
.thaw = rsi_thaw, |
| 1499 |
.restore = rsi_restore, |
| 1500 |
}; |
| 1501 |
#endif |
| 1502 |
|
| 1503 |
static const struct sdio_device_id rsi_dev_table[] = { |
| 1504 |
{ SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9113) }, |
| 1505 |
{ SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9116) }, |
| 1506 |
{ /* Blank */}, |
| 1507 |
}; |
| 1508 |
|
| 1509 |
static struct sdio_driver rsi_driver = { |
| 1510 |
.name = "RSI-SDIO WLAN", |
| 1511 |
.probe = rsi_probe, |
| 1512 |
.remove = rsi_disconnect, |
| 1513 |
.id_table = rsi_dev_table, |
| 1514 |
#ifdef CONFIG_PM |
| 1515 |
.shutdown = rsi_shutdown, |
| 1516 |
.drv = { |
| 1517 |
.pm = &rsi_pm_ops, |
| 1518 |
} |
| 1519 |
#endif |
| 1520 |
}; |
| 1521 |
module_sdio_driver(rsi_driver); |
| 1522 |
|
| 1523 |
MODULE_AUTHOR("Redpine Signals Inc"); |
| 1524 |
MODULE_DESCRIPTION("Common SDIO layer for RSI drivers"); |
| 1525 |
MODULE_DEVICE_TABLE(sdio, rsi_dev_table); |
| 1526 |
MODULE_FIRMWARE(FIRMWARE_RSI9113); |
| 1527 |
MODULE_VERSION("0.1"); |
| 1528 |
MODULE_LICENSE("Dual BSD/GPL"); |