| 1 |
/* |
| 2 |
* Copyright (c) 2014 Redpine Signals Inc. |
| 3 |
* |
| 4 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 5 |
* purpose with or without fee is hereby granted, provided that the above |
| 6 |
* copyright notice and this permission notice appear in all copies. |
| 7 |
* |
| 8 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 9 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 10 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 11 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 12 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 13 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 14 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 15 |
* |
| 16 |
*/ |
| 17 |
|
| 18 |
#include <linux/firmware.h> |
| 19 |
#include <net/rsi_91x.h> |
| 20 |
#include "rsi_sdio.h" |
| 21 |
#include "rsi_common.h" |
| 22 |
|
| 23 |
/** |
| 24 |
* rsi_sdio_master_access_msword() - This function sets the AHB master access |
| 25 |
* MS word in the SDIO slave registers. |
| 26 |
* @adapter: Pointer to the adapter structure. |
| 27 |
* @ms_word: ms word need to be initialized. |
| 28 |
* |
| 29 |
* Return: status: 0 on success, -1 on failure. |
| 30 |
*/ |
| 31 |
int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word) |
| 32 |
{ |
| 33 |
u8 byte; |
| 34 |
u8 function = 0; |
| 35 |
int status = 0; |
| 36 |
|
| 37 |
byte = (u8)(ms_word & 0x00FF); |
| 38 |
|
| 39 |
rsi_dbg(INIT_ZONE, |
| 40 |
"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte); |
| 41 |
|
| 42 |
status = rsi_sdio_write_register(adapter, |
| 43 |
function, |
| 44 |
SDIO_MASTER_ACCESS_MSBYTE, |
| 45 |
&byte); |
| 46 |
if (status) { |
| 47 |
rsi_dbg(ERR_ZONE, |
| 48 |
"%s: fail to access MASTER_ACCESS_MSBYTE\n", |
| 49 |
__func__); |
| 50 |
return -1; |
| 51 |
} |
| 52 |
|
| 53 |
byte = (u8)(ms_word >> 8); |
| 54 |
|
| 55 |
rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte); |
| 56 |
status = rsi_sdio_write_register(adapter, |
| 57 |
function, |
| 58 |
SDIO_MASTER_ACCESS_LSBYTE, |
| 59 |
&byte); |
| 60 |
return status; |
| 61 |
} |
| 62 |
|
| 63 |
static void rsi_rx_handler(struct rsi_hw *adapter); |
| 64 |
|
| 65 |
void rsi_sdio_rx_thread(struct rsi_common *common) |
| 66 |
{ |
| 67 |
struct rsi_hw *adapter = common->priv; |
| 68 |
struct rsi_91x_sdiodev *sdev = adapter->rsi_dev; |
| 69 |
|
| 70 |
do { |
| 71 |
rsi_wait_event(&sdev->rx_thread.event, EVENT_WAIT_FOREVER); |
| 72 |
rsi_reset_event(&sdev->rx_thread.event); |
| 73 |
rsi_rx_handler(adapter); |
| 74 |
} while (!atomic_read(&sdev->rx_thread.thread_done)); |
| 75 |
|
| 76 |
rsi_dbg(INFO_ZONE, "%s: Terminated SDIO RX thread\n", __func__); |
| 77 |
atomic_inc(&sdev->rx_thread.thread_done); |
| 78 |
kthread_complete_and_exit(&sdev->rx_thread.completion, 0); |
| 79 |
} |
| 80 |
|
| 81 |
/** |
| 82 |
* rsi_process_pkt() - This Function reads rx_blocks register and figures out |
| 83 |
* the size of the rx pkt. |
| 84 |
* @common: Pointer to the driver private structure. |
| 85 |
* |
| 86 |
* Return: 0 on success, -1 on failure. |
| 87 |
*/ |
| 88 |
static int rsi_process_pkt(struct rsi_common *common) |
| 89 |
{ |
| 90 |
struct rsi_hw *adapter = common->priv; |
| 91 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 92 |
u8 num_blks = 0; |
| 93 |
u32 rcv_pkt_len = 0; |
| 94 |
int status = 0; |
| 95 |
u8 value = 0; |
| 96 |
|
| 97 |
num_blks = ((adapter->interrupt_status & 1) | |
| 98 |
((adapter->interrupt_status >> RECV_NUM_BLOCKS) << 1)); |
| 99 |
|
| 100 |
if (!num_blks) { |
| 101 |
status = rsi_sdio_read_register(adapter, |
| 102 |
SDIO_RX_NUM_BLOCKS_REG, |
| 103 |
&value); |
| 104 |
if (status) { |
| 105 |
rsi_dbg(ERR_ZONE, |
| 106 |
"%s: Failed to read pkt length from the card:\n", |
| 107 |
__func__); |
| 108 |
return status; |
| 109 |
} |
| 110 |
num_blks = value & 0x1f; |
| 111 |
} |
| 112 |
|
| 113 |
if (dev->write_fail == 2) |
| 114 |
rsi_sdio_ack_intr(common->priv, (1 << MSDU_PKT_PENDING)); |
| 115 |
|
| 116 |
if (unlikely(!num_blks)) { |
| 117 |
dev->write_fail = 2; |
| 118 |
return -1; |
| 119 |
} |
| 120 |
|
| 121 |
rcv_pkt_len = (num_blks * 256); |
| 122 |
|
| 123 |
status = rsi_sdio_host_intf_read_pkt(adapter, dev->pktbuffer, |
| 124 |
rcv_pkt_len); |
| 125 |
if (status) { |
| 126 |
rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n", |
| 127 |
__func__); |
| 128 |
return status; |
| 129 |
} |
| 130 |
|
| 131 |
status = rsi_read_pkt(common, dev->pktbuffer, rcv_pkt_len); |
| 132 |
if (status) { |
| 133 |
rsi_dbg(ERR_ZONE, "Failed to read the packet\n"); |
| 134 |
return status; |
| 135 |
} |
| 136 |
|
| 137 |
return 0; |
| 138 |
} |
| 139 |
|
| 140 |
/** |
| 141 |
* rsi_init_sdio_slave_regs() - This function does the actual initialization |
| 142 |
* of SDBUS slave registers. |
| 143 |
* @adapter: Pointer to the adapter structure. |
| 144 |
* |
| 145 |
* Return: status: 0 on success, -1 on failure. |
| 146 |
*/ |
| 147 |
int rsi_init_sdio_slave_regs(struct rsi_hw *adapter) |
| 148 |
{ |
| 149 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 150 |
u8 function = 0; |
| 151 |
u8 byte; |
| 152 |
int status = 0; |
| 153 |
|
| 154 |
if (dev->next_read_delay) { |
| 155 |
byte = dev->next_read_delay; |
| 156 |
status = rsi_sdio_write_register(adapter, |
| 157 |
function, |
| 158 |
SDIO_NXT_RD_DELAY2, |
| 159 |
&byte); |
| 160 |
if (status) { |
| 161 |
rsi_dbg(ERR_ZONE, |
| 162 |
"%s: Failed to write SDIO_NXT_RD_DELAY2\n", |
| 163 |
__func__); |
| 164 |
return -1; |
| 165 |
} |
| 166 |
} |
| 167 |
|
| 168 |
if (dev->sdio_high_speed_enable) { |
| 169 |
rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__); |
| 170 |
byte = 0x3; |
| 171 |
|
| 172 |
status = rsi_sdio_write_register(adapter, |
| 173 |
function, |
| 174 |
SDIO_REG_HIGH_SPEED, |
| 175 |
&byte); |
| 176 |
if (status) { |
| 177 |
rsi_dbg(ERR_ZONE, |
| 178 |
"%s: Failed to enable SDIO high speed\n", |
| 179 |
__func__); |
| 180 |
return -1; |
| 181 |
} |
| 182 |
} |
| 183 |
|
| 184 |
/* This tells SDIO FIFO when to start read to host */ |
| 185 |
rsi_dbg(INIT_ZONE, "%s: Initializing SDIO read start level\n", __func__); |
| 186 |
byte = 0x24; |
| 187 |
|
| 188 |
status = rsi_sdio_write_register(adapter, |
| 189 |
function, |
| 190 |
SDIO_READ_START_LVL, |
| 191 |
&byte); |
| 192 |
if (status) { |
| 193 |
rsi_dbg(ERR_ZONE, |
| 194 |
"%s: Failed to write SDIO_READ_START_LVL\n", __func__); |
| 195 |
return -1; |
| 196 |
} |
| 197 |
|
| 198 |
rsi_dbg(INIT_ZONE, "%s: Initializing FIFO ctrl registers\n", __func__); |
| 199 |
byte = (128 - 32); |
| 200 |
|
| 201 |
status = rsi_sdio_write_register(adapter, |
| 202 |
function, |
| 203 |
SDIO_READ_FIFO_CTL, |
| 204 |
&byte); |
| 205 |
if (status) { |
| 206 |
rsi_dbg(ERR_ZONE, |
| 207 |
"%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__); |
| 208 |
return -1; |
| 209 |
} |
| 210 |
|
| 211 |
byte = 32; |
| 212 |
status = rsi_sdio_write_register(adapter, |
| 213 |
function, |
| 214 |
SDIO_WRITE_FIFO_CTL, |
| 215 |
&byte); |
| 216 |
if (status) { |
| 217 |
rsi_dbg(ERR_ZONE, |
| 218 |
"%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__); |
| 219 |
return -1; |
| 220 |
} |
| 221 |
|
| 222 |
return 0; |
| 223 |
} |
| 224 |
|
| 225 |
/** |
| 226 |
* rsi_rx_handler() - Read and process SDIO interrupts. |
| 227 |
* @adapter: Pointer to the adapter structure. |
| 228 |
* |
| 229 |
* Return: None. |
| 230 |
*/ |
| 231 |
static void rsi_rx_handler(struct rsi_hw *adapter) |
| 232 |
{ |
| 233 |
struct rsi_common *common = adapter->priv; |
| 234 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 235 |
int status; |
| 236 |
u8 isr_status = 0; |
| 237 |
u8 fw_status = 0; |
| 238 |
|
| 239 |
dev->rx_info.sdio_int_counter++; |
| 240 |
|
| 241 |
do { |
| 242 |
mutex_lock(&common->rx_lock); |
| 243 |
status = rsi_sdio_read_register(common->priv, |
| 244 |
RSI_FN1_INT_REGISTER, |
| 245 |
&isr_status); |
| 246 |
if (status) { |
| 247 |
rsi_dbg(ERR_ZONE, |
| 248 |
"%s: Failed to Read Intr Status Register\n", |
| 249 |
__func__); |
| 250 |
mutex_unlock(&common->rx_lock); |
| 251 |
return; |
| 252 |
} |
| 253 |
adapter->interrupt_status = isr_status; |
| 254 |
|
| 255 |
if (isr_status == 0) { |
| 256 |
rsi_set_event(&common->tx_thread.event); |
| 257 |
dev->rx_info.sdio_intr_status_zero++; |
| 258 |
mutex_unlock(&common->rx_lock); |
| 259 |
return; |
| 260 |
} |
| 261 |
|
| 262 |
rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n", |
| 263 |
__func__, isr_status, (1 << MSDU_PKT_PENDING), |
| 264 |
(1 << FW_ASSERT_IND)); |
| 265 |
|
| 266 |
if (isr_status & BIT(PKT_BUFF_AVAILABLE)) { |
| 267 |
status = rsi_sdio_check_buffer_status(adapter, 0); |
| 268 |
if (status < 0) |
| 269 |
rsi_dbg(ERR_ZONE, |
| 270 |
"%s: Failed to check buffer status\n", |
| 271 |
__func__); |
| 272 |
rsi_sdio_ack_intr(common->priv, |
| 273 |
BIT(PKT_BUFF_AVAILABLE)); |
| 274 |
rsi_set_event(&common->tx_thread.event); |
| 275 |
|
| 276 |
rsi_dbg(ISR_ZONE, "%s: ==> BUFFER_AVAILABLE <==\n", |
| 277 |
__func__); |
| 278 |
dev->buff_status_updated = true; |
| 279 |
|
| 280 |
isr_status &= ~BIT(PKT_BUFF_AVAILABLE); |
| 281 |
} |
| 282 |
|
| 283 |
if (isr_status & BIT(FW_ASSERT_IND)) { |
| 284 |
rsi_dbg(ERR_ZONE, "%s: ==> FIRMWARE Assert <==\n", |
| 285 |
__func__); |
| 286 |
status = rsi_sdio_read_register(common->priv, |
| 287 |
SDIO_FW_STATUS_REG, |
| 288 |
&fw_status); |
| 289 |
if (status) { |
| 290 |
rsi_dbg(ERR_ZONE, |
| 291 |
"%s: Failed to read f/w reg\n", |
| 292 |
__func__); |
| 293 |
} else { |
| 294 |
rsi_dbg(ERR_ZONE, |
| 295 |
"%s: Firmware Status is 0x%x\n", |
| 296 |
__func__, fw_status); |
| 297 |
rsi_sdio_ack_intr(common->priv, |
| 298 |
BIT(FW_ASSERT_IND)); |
| 299 |
} |
| 300 |
|
| 301 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 302 |
|
| 303 |
isr_status &= ~BIT(FW_ASSERT_IND); |
| 304 |
} |
| 305 |
|
| 306 |
if (isr_status & BIT(MSDU_PKT_PENDING)) { |
| 307 |
rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n"); |
| 308 |
dev->rx_info.total_sdio_msdu_pending_intr++; |
| 309 |
|
| 310 |
status = rsi_process_pkt(common); |
| 311 |
if (status) { |
| 312 |
rsi_dbg(ERR_ZONE, "%s: Failed to read pkt\n", |
| 313 |
__func__); |
| 314 |
mutex_unlock(&common->rx_lock); |
| 315 |
return; |
| 316 |
} |
| 317 |
|
| 318 |
isr_status &= ~BIT(MSDU_PKT_PENDING); |
| 319 |
} |
| 320 |
|
| 321 |
if (isr_status) { |
| 322 |
rsi_sdio_ack_intr(common->priv, isr_status); |
| 323 |
dev->rx_info.total_sdio_unknown_intr++; |
| 324 |
isr_status = 0; |
| 325 |
rsi_dbg(ISR_ZONE, "Unknown Interrupt %x\n", |
| 326 |
isr_status); |
| 327 |
} |
| 328 |
|
| 329 |
mutex_unlock(&common->rx_lock); |
| 330 |
} while (1); |
| 331 |
} |
| 332 |
|
| 333 |
/* This function is used to read buffer status register and |
| 334 |
* set relevant fields in rsi_91x_sdiodev struct. |
| 335 |
*/ |
| 336 |
int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num) |
| 337 |
{ |
| 338 |
struct rsi_common *common = adapter->priv; |
| 339 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 340 |
u8 buf_status = 0; |
| 341 |
int status = 0; |
| 342 |
static int counter = 4; |
| 343 |
|
| 344 |
if (!dev->buff_status_updated && counter) { |
| 345 |
counter--; |
| 346 |
goto out; |
| 347 |
} |
| 348 |
|
| 349 |
dev->buff_status_updated = false; |
| 350 |
status = rsi_sdio_read_register(common->priv, |
| 351 |
RSI_DEVICE_BUFFER_STATUS_REGISTER, |
| 352 |
&buf_status); |
| 353 |
|
| 354 |
if (status) { |
| 355 |
rsi_dbg(ERR_ZONE, |
| 356 |
"%s: Failed to read status register\n", __func__); |
| 357 |
return -1; |
| 358 |
} |
| 359 |
|
| 360 |
if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) { |
| 361 |
if (!dev->rx_info.mgmt_buffer_full) |
| 362 |
dev->rx_info.mgmt_buf_full_counter++; |
| 363 |
dev->rx_info.mgmt_buffer_full = true; |
| 364 |
} else { |
| 365 |
dev->rx_info.mgmt_buffer_full = false; |
| 366 |
} |
| 367 |
|
| 368 |
if (buf_status & (BIT(PKT_BUFF_FULL))) { |
| 369 |
if (!dev->rx_info.buffer_full) |
| 370 |
dev->rx_info.buf_full_counter++; |
| 371 |
dev->rx_info.buffer_full = true; |
| 372 |
} else { |
| 373 |
dev->rx_info.buffer_full = false; |
| 374 |
} |
| 375 |
|
| 376 |
if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) { |
| 377 |
if (!dev->rx_info.semi_buffer_full) |
| 378 |
dev->rx_info.buf_semi_full_counter++; |
| 379 |
dev->rx_info.semi_buffer_full = true; |
| 380 |
} else { |
| 381 |
dev->rx_info.semi_buffer_full = false; |
| 382 |
} |
| 383 |
|
| 384 |
if (dev->rx_info.mgmt_buffer_full || dev->rx_info.buf_full_counter) |
| 385 |
counter = 1; |
| 386 |
else |
| 387 |
counter = 4; |
| 388 |
|
| 389 |
out: |
| 390 |
if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full)) |
| 391 |
return QUEUE_FULL; |
| 392 |
|
| 393 |
if ((q_num < MGMT_SOFT_Q) && (dev->rx_info.buffer_full)) |
| 394 |
return QUEUE_FULL; |
| 395 |
|
| 396 |
return QUEUE_NOT_FULL; |
| 397 |
} |
| 398 |
|
| 399 |
/** |
| 400 |
* rsi_sdio_determine_event_timeout() - This Function determines the event |
| 401 |
* timeout duration. |
| 402 |
* @adapter: Pointer to the adapter structure. |
| 403 |
* |
| 404 |
* Return: timeout duration is returned. |
| 405 |
*/ |
| 406 |
int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter) |
| 407 |
{ |
| 408 |
struct rsi_91x_sdiodev *dev = adapter->rsi_dev; |
| 409 |
|
| 410 |
/* Once buffer full is seen, event timeout to occur every 2 msecs */ |
| 411 |
if (dev->rx_info.buffer_full) |
| 412 |
return 2; |
| 413 |
|
| 414 |
return EVENT_WAIT_FOREVER; |
| 415 |
} |