| 1 |
/* |
| 2 |
* Copyright (c) 2014 Redpine Signals Inc. |
| 3 |
* |
| 4 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 5 |
* purpose with or without fee is hereby granted, provided that the above |
| 6 |
* copyright notice and this permission notice appear in all copies. |
| 7 |
* |
| 8 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 9 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 10 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 11 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 12 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 13 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 14 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 15 |
*/ |
| 16 |
|
| 17 |
#include <linux/etherdevice.h> |
| 18 |
#include <linux/timer.h> |
| 19 |
#include "rsi_mgmt.h" |
| 20 |
#include "rsi_common.h" |
| 21 |
#include "rsi_ps.h" |
| 22 |
#include "rsi_hal.h" |
| 23 |
|
| 24 |
static struct bootup_params boot_params_20 = { |
| 25 |
.magic_number = cpu_to_le16(0x5aa5), |
| 26 |
.crystal_good_time = 0x0, |
| 27 |
.valid = cpu_to_le32(VALID_20), |
| 28 |
.reserved_for_valids = 0x0, |
| 29 |
.bootup_mode_info = 0x0, |
| 30 |
.digital_loop_back_params = 0x0, |
| 31 |
.rtls_timestamp_en = 0x0, |
| 32 |
.host_spi_intr_cfg = 0x0, |
| 33 |
.device_clk_info = {{ |
| 34 |
.pll_config_g = { |
| 35 |
.tapll_info_g = { |
| 36 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| |
| 37 |
(TA_PLL_M_VAL_20)), |
| 38 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), |
| 39 |
}, |
| 40 |
.pll960_info_g = { |
| 41 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| |
| 42 |
(PLL960_N_VAL_20)), |
| 43 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), |
| 44 |
.pll_reg_3 = 0x0, |
| 45 |
}, |
| 46 |
.afepll_info_g = { |
| 47 |
.pll_reg = cpu_to_le16(0x9f0), |
| 48 |
} |
| 49 |
}, |
| 50 |
.switch_clk_g = { |
| 51 |
.switch_clk_info = cpu_to_le16(0xb), |
| 52 |
.bbp_lmac_clk_reg_val = cpu_to_le16(0x111), |
| 53 |
.umac_clock_reg_config = cpu_to_le16(0x48), |
| 54 |
.qspi_uart_clock_reg_config = cpu_to_le16(0x1211) |
| 55 |
} |
| 56 |
}, |
| 57 |
{ |
| 58 |
.pll_config_g = { |
| 59 |
.tapll_info_g = { |
| 60 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| |
| 61 |
(TA_PLL_M_VAL_20)), |
| 62 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), |
| 63 |
}, |
| 64 |
.pll960_info_g = { |
| 65 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| |
| 66 |
(PLL960_N_VAL_20)), |
| 67 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), |
| 68 |
.pll_reg_3 = 0x0, |
| 69 |
}, |
| 70 |
.afepll_info_g = { |
| 71 |
.pll_reg = cpu_to_le16(0x9f0), |
| 72 |
} |
| 73 |
}, |
| 74 |
.switch_clk_g = { |
| 75 |
.switch_clk_info = 0x0, |
| 76 |
.bbp_lmac_clk_reg_val = 0x0, |
| 77 |
.umac_clock_reg_config = 0x0, |
| 78 |
.qspi_uart_clock_reg_config = 0x0 |
| 79 |
} |
| 80 |
}, |
| 81 |
{ |
| 82 |
.pll_config_g = { |
| 83 |
.tapll_info_g = { |
| 84 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)| |
| 85 |
(TA_PLL_M_VAL_20)), |
| 86 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20), |
| 87 |
}, |
| 88 |
.pll960_info_g = { |
| 89 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)| |
| 90 |
(PLL960_N_VAL_20)), |
| 91 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20), |
| 92 |
.pll_reg_3 = 0x0, |
| 93 |
}, |
| 94 |
.afepll_info_g = { |
| 95 |
.pll_reg = cpu_to_le16(0x9f0), |
| 96 |
} |
| 97 |
}, |
| 98 |
.switch_clk_g = { |
| 99 |
.switch_clk_info = 0x0, |
| 100 |
.bbp_lmac_clk_reg_val = 0x0, |
| 101 |
.umac_clock_reg_config = 0x0, |
| 102 |
.qspi_uart_clock_reg_config = 0x0 |
| 103 |
} |
| 104 |
} }, |
| 105 |
.buckboost_wakeup_cnt = 0x0, |
| 106 |
.pmu_wakeup_wait = 0x0, |
| 107 |
.shutdown_wait_time = 0x0, |
| 108 |
.pmu_slp_clkout_sel = 0x0, |
| 109 |
.wdt_prog_value = 0x0, |
| 110 |
.wdt_soc_rst_delay = 0x0, |
| 111 |
.dcdc_operation_mode = 0x0, |
| 112 |
.soc_reset_wait_cnt = 0x0, |
| 113 |
.waiting_time_at_fresh_sleep = 0x0, |
| 114 |
.max_threshold_to_avoid_sleep = 0x0, |
| 115 |
.beacon_resedue_alg_en = 0, |
| 116 |
}; |
| 117 |
|
| 118 |
static struct bootup_params boot_params_40 = { |
| 119 |
.magic_number = cpu_to_le16(0x5aa5), |
| 120 |
.crystal_good_time = 0x0, |
| 121 |
.valid = cpu_to_le32(VALID_40), |
| 122 |
.reserved_for_valids = 0x0, |
| 123 |
.bootup_mode_info = 0x0, |
| 124 |
.digital_loop_back_params = 0x0, |
| 125 |
.rtls_timestamp_en = 0x0, |
| 126 |
.host_spi_intr_cfg = 0x0, |
| 127 |
.device_clk_info = {{ |
| 128 |
.pll_config_g = { |
| 129 |
.tapll_info_g = { |
| 130 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| |
| 131 |
(TA_PLL_M_VAL_40)), |
| 132 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), |
| 133 |
}, |
| 134 |
.pll960_info_g = { |
| 135 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| |
| 136 |
(PLL960_N_VAL_40)), |
| 137 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), |
| 138 |
.pll_reg_3 = 0x0, |
| 139 |
}, |
| 140 |
.afepll_info_g = { |
| 141 |
.pll_reg = cpu_to_le16(0x9f0), |
| 142 |
} |
| 143 |
}, |
| 144 |
.switch_clk_g = { |
| 145 |
.switch_clk_info = cpu_to_le16(0x09), |
| 146 |
.bbp_lmac_clk_reg_val = cpu_to_le16(0x1121), |
| 147 |
.umac_clock_reg_config = cpu_to_le16(0x48), |
| 148 |
.qspi_uart_clock_reg_config = cpu_to_le16(0x1211) |
| 149 |
} |
| 150 |
}, |
| 151 |
{ |
| 152 |
.pll_config_g = { |
| 153 |
.tapll_info_g = { |
| 154 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| |
| 155 |
(TA_PLL_M_VAL_40)), |
| 156 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), |
| 157 |
}, |
| 158 |
.pll960_info_g = { |
| 159 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| |
| 160 |
(PLL960_N_VAL_40)), |
| 161 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), |
| 162 |
.pll_reg_3 = 0x0, |
| 163 |
}, |
| 164 |
.afepll_info_g = { |
| 165 |
.pll_reg = cpu_to_le16(0x9f0), |
| 166 |
} |
| 167 |
}, |
| 168 |
.switch_clk_g = { |
| 169 |
.switch_clk_info = 0x0, |
| 170 |
.bbp_lmac_clk_reg_val = 0x0, |
| 171 |
.umac_clock_reg_config = 0x0, |
| 172 |
.qspi_uart_clock_reg_config = 0x0 |
| 173 |
} |
| 174 |
}, |
| 175 |
{ |
| 176 |
.pll_config_g = { |
| 177 |
.tapll_info_g = { |
| 178 |
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)| |
| 179 |
(TA_PLL_M_VAL_40)), |
| 180 |
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40), |
| 181 |
}, |
| 182 |
.pll960_info_g = { |
| 183 |
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)| |
| 184 |
(PLL960_N_VAL_40)), |
| 185 |
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40), |
| 186 |
.pll_reg_3 = 0x0, |
| 187 |
}, |
| 188 |
.afepll_info_g = { |
| 189 |
.pll_reg = cpu_to_le16(0x9f0), |
| 190 |
} |
| 191 |
}, |
| 192 |
.switch_clk_g = { |
| 193 |
.switch_clk_info = 0x0, |
| 194 |
.bbp_lmac_clk_reg_val = 0x0, |
| 195 |
.umac_clock_reg_config = 0x0, |
| 196 |
.qspi_uart_clock_reg_config = 0x0 |
| 197 |
} |
| 198 |
} }, |
| 199 |
.buckboost_wakeup_cnt = 0x0, |
| 200 |
.pmu_wakeup_wait = 0x0, |
| 201 |
.shutdown_wait_time = 0x0, |
| 202 |
.pmu_slp_clkout_sel = 0x0, |
| 203 |
.wdt_prog_value = 0x0, |
| 204 |
.wdt_soc_rst_delay = 0x0, |
| 205 |
.dcdc_operation_mode = 0x0, |
| 206 |
.soc_reset_wait_cnt = 0x0, |
| 207 |
.waiting_time_at_fresh_sleep = 0x0, |
| 208 |
.max_threshold_to_avoid_sleep = 0x0, |
| 209 |
.beacon_resedue_alg_en = 0, |
| 210 |
}; |
| 211 |
|
| 212 |
static struct bootup_params_9116 boot_params_9116_20 = { |
| 213 |
.magic_number = cpu_to_le16(LOADED_TOKEN), |
| 214 |
.valid = cpu_to_le32(VALID_20), |
| 215 |
.device_clk_info_9116 = {{ |
| 216 |
.pll_config_9116_g = { |
| 217 |
.pll_ctrl_set_reg = cpu_to_le16(0xd518), |
| 218 |
.pll_ctrl_clr_reg = cpu_to_le16(0x2ae7), |
| 219 |
.pll_modem_conig_reg = cpu_to_le16(0x2000), |
| 220 |
.soc_clk_config_reg = cpu_to_le16(0x0c18), |
| 221 |
.adc_dac_strm1_config_reg = cpu_to_le16(0x1100), |
| 222 |
.adc_dac_strm2_config_reg = cpu_to_le16(0x6600), |
| 223 |
}, |
| 224 |
.switch_clk_9116_g = { |
| 225 |
.switch_clk_info = |
| 226 |
cpu_to_le32((RSI_SWITCH_TASS_CLK | |
| 227 |
RSI_SWITCH_WLAN_BBP_LMAC_CLK_REG | |
| 228 |
RSI_SWITCH_BBP_LMAC_CLK_REG)), |
| 229 |
.tass_clock_reg = cpu_to_le32(0x083C0503), |
| 230 |
.wlan_bbp_lmac_clk_reg_val = cpu_to_le32(0x01042001), |
| 231 |
.zbbt_bbp_lmac_clk_reg_val = cpu_to_le32(0x02010001), |
| 232 |
.bbp_lmac_clk_en_val = cpu_to_le32(0x0000003b), |
| 233 |
} |
| 234 |
}, |
| 235 |
}, |
| 236 |
}; |
| 237 |
|
| 238 |
static struct bootup_params_9116 boot_params_9116_40 = { |
| 239 |
.magic_number = cpu_to_le16(LOADED_TOKEN), |
| 240 |
.valid = cpu_to_le32(VALID_40), |
| 241 |
.device_clk_info_9116 = {{ |
| 242 |
.pll_config_9116_g = { |
| 243 |
.pll_ctrl_set_reg = cpu_to_le16(0xd518), |
| 244 |
.pll_ctrl_clr_reg = cpu_to_le16(0x2ae7), |
| 245 |
.pll_modem_conig_reg = cpu_to_le16(0x3000), |
| 246 |
.soc_clk_config_reg = cpu_to_le16(0x0c18), |
| 247 |
.adc_dac_strm1_config_reg = cpu_to_le16(0x0000), |
| 248 |
.adc_dac_strm2_config_reg = cpu_to_le16(0x6600), |
| 249 |
}, |
| 250 |
.switch_clk_9116_g = { |
| 251 |
.switch_clk_info = |
| 252 |
cpu_to_le32((RSI_SWITCH_TASS_CLK | |
| 253 |
RSI_SWITCH_WLAN_BBP_LMAC_CLK_REG | |
| 254 |
RSI_SWITCH_BBP_LMAC_CLK_REG | |
| 255 |
RSI_MODEM_CLK_160MHZ)), |
| 256 |
.tass_clock_reg = cpu_to_le32(0x083C0503), |
| 257 |
.wlan_bbp_lmac_clk_reg_val = cpu_to_le32(0x01042002), |
| 258 |
.zbbt_bbp_lmac_clk_reg_val = cpu_to_le32(0x04010002), |
| 259 |
.bbp_lmac_clk_en_val = cpu_to_le32(0x0000003b), |
| 260 |
} |
| 261 |
}, |
| 262 |
}, |
| 263 |
}; |
| 264 |
|
| 265 |
static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130}; |
| 266 |
|
| 267 |
/** |
| 268 |
* rsi_set_default_parameters() - This function sets default parameters. |
| 269 |
* @common: Pointer to the driver private structure. |
| 270 |
* |
| 271 |
* Return: none |
| 272 |
*/ |
| 273 |
static void rsi_set_default_parameters(struct rsi_common *common) |
| 274 |
{ |
| 275 |
common->band = NL80211_BAND_2GHZ; |
| 276 |
common->channel_width = BW_20MHZ; |
| 277 |
common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; |
| 278 |
common->channel = 1; |
| 279 |
memset(&common->rate_config, 0, sizeof(common->rate_config)); |
| 280 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 281 |
common->iface_down = true; |
| 282 |
common->endpoint = EP_2GHZ_20MHZ; |
| 283 |
common->driver_mode = 1; /* End to end mode */ |
| 284 |
common->lp_ps_handshake_mode = 0; /* Default no handShake mode*/ |
| 285 |
common->ulp_ps_handshake_mode = 2; /* Default PKT handShake mode*/ |
| 286 |
common->rf_power_val = 0; /* Default 1.9V */ |
| 287 |
common->wlan_rf_power_mode = 0; |
| 288 |
common->obm_ant_sel_val = 2; |
| 289 |
common->beacon_interval = RSI_BEACON_INTERVAL; |
| 290 |
common->dtim_cnt = RSI_DTIM_COUNT; |
| 291 |
common->w9116_features.pll_mode = 0x0; |
| 292 |
common->w9116_features.rf_type = 1; |
| 293 |
common->w9116_features.wireless_mode = 0; |
| 294 |
common->w9116_features.enable_ppe = 0; |
| 295 |
common->w9116_features.afe_type = 1; |
| 296 |
common->w9116_features.dpd = 0; |
| 297 |
common->w9116_features.sifs_tx_enable = 0; |
| 298 |
common->w9116_features.ps_options = 0; |
| 299 |
} |
| 300 |
|
| 301 |
void init_bgscan_params(struct rsi_common *common) |
| 302 |
{ |
| 303 |
memset((u8 *)&common->bgscan, 0, sizeof(struct rsi_bgscan_params)); |
| 304 |
common->bgscan.bgscan_threshold = RSI_DEF_BGSCAN_THRLD; |
| 305 |
common->bgscan.roam_threshold = RSI_DEF_ROAM_THRLD; |
| 306 |
common->bgscan.bgscan_periodicity = RSI_BGSCAN_PERIODICITY; |
| 307 |
common->bgscan.num_bgscan_channels = 0; |
| 308 |
common->bgscan.two_probe = 1; |
| 309 |
common->bgscan.active_scan_duration = RSI_ACTIVE_SCAN_TIME; |
| 310 |
common->bgscan.passive_scan_duration = RSI_PASSIVE_SCAN_TIME; |
| 311 |
} |
| 312 |
|
| 313 |
/** |
| 314 |
* rsi_set_contention_vals() - This function sets the contention values for the |
| 315 |
* backoff procedure. |
| 316 |
* @common: Pointer to the driver private structure. |
| 317 |
* |
| 318 |
* Return: None. |
| 319 |
*/ |
| 320 |
static void rsi_set_contention_vals(struct rsi_common *common) |
| 321 |
{ |
| 322 |
u8 ii = 0; |
| 323 |
|
| 324 |
for (; ii < NUM_EDCA_QUEUES; ii++) { |
| 325 |
common->tx_qinfo[ii].wme_params = |
| 326 |
(((common->edca_params[ii].cw_min / 2) + |
| 327 |
(common->edca_params[ii].aifs)) * |
| 328 |
WMM_SHORT_SLOT_TIME + SIFS_DURATION); |
| 329 |
common->tx_qinfo[ii].weight = common->tx_qinfo[ii].wme_params; |
| 330 |
common->tx_qinfo[ii].pkt_contended = 0; |
| 331 |
} |
| 332 |
} |
| 333 |
|
| 334 |
/** |
| 335 |
* rsi_send_internal_mgmt_frame() - This function sends management frames to |
| 336 |
* firmware.Also schedules packet to queue |
| 337 |
* for transmission. |
| 338 |
* @common: Pointer to the driver private structure. |
| 339 |
* @skb: Pointer to the socket buffer structure. |
| 340 |
* |
| 341 |
* Return: 0 on success, -1 on failure. |
| 342 |
*/ |
| 343 |
static int rsi_send_internal_mgmt_frame(struct rsi_common *common, |
| 344 |
struct sk_buff *skb) |
| 345 |
{ |
| 346 |
struct skb_info *tx_params; |
| 347 |
struct rsi_cmd_desc *desc; |
| 348 |
|
| 349 |
if (skb == NULL) { |
| 350 |
rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__); |
| 351 |
return -ENOMEM; |
| 352 |
} |
| 353 |
desc = (struct rsi_cmd_desc *)skb->data; |
| 354 |
desc->desc_dword0.len_qno |= cpu_to_le16(DESC_IMMEDIATE_WAKEUP); |
| 355 |
skb->priority = MGMT_SOFT_Q; |
| 356 |
tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data; |
| 357 |
tx_params->flags |= INTERNAL_MGMT_PKT; |
| 358 |
skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb); |
| 359 |
rsi_set_event(&common->tx_thread.event); |
| 360 |
return 0; |
| 361 |
} |
| 362 |
|
| 363 |
/** |
| 364 |
* rsi_load_radio_caps() - This function is used to send radio capabilities |
| 365 |
* values to firmware. |
| 366 |
* @common: Pointer to the driver private structure. |
| 367 |
* |
| 368 |
* Return: 0 on success, corresponding negative error code on failure. |
| 369 |
*/ |
| 370 |
static int rsi_load_radio_caps(struct rsi_common *common) |
| 371 |
{ |
| 372 |
struct rsi_radio_caps *radio_caps; |
| 373 |
struct rsi_hw *adapter = common->priv; |
| 374 |
u16 inx = 0; |
| 375 |
u8 ii; |
| 376 |
u8 radio_id = 0; |
| 377 |
u16 gc[20] = {0xf0, 0xf0, 0xf0, 0xf0, |
| 378 |
0xf0, 0xf0, 0xf0, 0xf0, |
| 379 |
0xf0, 0xf0, 0xf0, 0xf0, |
| 380 |
0xf0, 0xf0, 0xf0, 0xf0, |
| 381 |
0xf0, 0xf0, 0xf0, 0xf0}; |
| 382 |
struct sk_buff *skb; |
| 383 |
u16 frame_len = sizeof(struct rsi_radio_caps); |
| 384 |
|
| 385 |
rsi_dbg(INFO_ZONE, "%s: Sending rate symbol req frame\n", __func__); |
| 386 |
|
| 387 |
skb = dev_alloc_skb(frame_len); |
| 388 |
|
| 389 |
if (!skb) { |
| 390 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 391 |
__func__); |
| 392 |
return -ENOMEM; |
| 393 |
} |
| 394 |
|
| 395 |
memset(skb->data, 0, frame_len); |
| 396 |
radio_caps = (struct rsi_radio_caps *)skb->data; |
| 397 |
|
| 398 |
radio_caps->desc_dword0.frame_type = RADIO_CAPABILITIES; |
| 399 |
radio_caps->channel_num = common->channel; |
| 400 |
radio_caps->rf_model = RSI_RF_TYPE; |
| 401 |
|
| 402 |
radio_caps->radio_cfg_info = RSI_LMAC_CLOCK_80MHZ; |
| 403 |
if (common->channel_width == BW_40MHZ) { |
| 404 |
radio_caps->radio_cfg_info |= RSI_ENABLE_40MHZ; |
| 405 |
|
| 406 |
if (common->fsm_state == FSM_MAC_INIT_DONE) { |
| 407 |
struct ieee80211_hw *hw = adapter->hw; |
| 408 |
struct ieee80211_conf *conf = &hw->conf; |
| 409 |
|
| 410 |
if (conf_is_ht40_plus(conf)) { |
| 411 |
radio_caps->ppe_ack_rate = |
| 412 |
cpu_to_le16(LOWER_20_ENABLE | |
| 413 |
(LOWER_20_ENABLE >> 12)); |
| 414 |
} else if (conf_is_ht40_minus(conf)) { |
| 415 |
radio_caps->ppe_ack_rate = |
| 416 |
cpu_to_le16(UPPER_20_ENABLE | |
| 417 |
(UPPER_20_ENABLE >> 12)); |
| 418 |
} else { |
| 419 |
radio_caps->ppe_ack_rate = |
| 420 |
cpu_to_le16((BW_40MHZ << 12) | |
| 421 |
FULL40M_ENABLE); |
| 422 |
} |
| 423 |
} |
| 424 |
} |
| 425 |
radio_caps->radio_info |= radio_id; |
| 426 |
|
| 427 |
if (adapter->device_model == RSI_DEV_9116 && |
| 428 |
common->channel_width == BW_20MHZ) |
| 429 |
radio_caps->radio_cfg_info &= ~0x3; |
| 430 |
|
| 431 |
radio_caps->sifs_tx_11n = cpu_to_le16(SIFS_TX_11N_VALUE); |
| 432 |
radio_caps->sifs_tx_11b = cpu_to_le16(SIFS_TX_11B_VALUE); |
| 433 |
radio_caps->slot_rx_11n = cpu_to_le16(SHORT_SLOT_VALUE); |
| 434 |
radio_caps->ofdm_ack_tout = cpu_to_le16(OFDM_ACK_TOUT_VALUE); |
| 435 |
radio_caps->cck_ack_tout = cpu_to_le16(CCK_ACK_TOUT_VALUE); |
| 436 |
radio_caps->preamble_type = cpu_to_le16(LONG_PREAMBLE); |
| 437 |
|
| 438 |
for (ii = 0; ii < MAX_HW_QUEUES; ii++) { |
| 439 |
radio_caps->qos_params[ii].cont_win_min_q = cpu_to_le16(3); |
| 440 |
radio_caps->qos_params[ii].cont_win_max_q = cpu_to_le16(0x3f); |
| 441 |
radio_caps->qos_params[ii].aifsn_val_q = cpu_to_le16(2); |
| 442 |
radio_caps->qos_params[ii].txop_q = 0; |
| 443 |
} |
| 444 |
|
| 445 |
for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) { |
| 446 |
if (common->edca_params[ii].cw_max > 0) { |
| 447 |
radio_caps->qos_params[ii].cont_win_min_q = |
| 448 |
cpu_to_le16(common->edca_params[ii].cw_min); |
| 449 |
radio_caps->qos_params[ii].cont_win_max_q = |
| 450 |
cpu_to_le16(common->edca_params[ii].cw_max); |
| 451 |
radio_caps->qos_params[ii].aifsn_val_q = |
| 452 |
cpu_to_le16(common->edca_params[ii].aifs << 8); |
| 453 |
radio_caps->qos_params[ii].txop_q = |
| 454 |
cpu_to_le16(common->edca_params[ii].txop); |
| 455 |
} |
| 456 |
} |
| 457 |
|
| 458 |
radio_caps->qos_params[BROADCAST_HW_Q].txop_q = cpu_to_le16(0xffff); |
| 459 |
radio_caps->qos_params[MGMT_HW_Q].txop_q = 0; |
| 460 |
radio_caps->qos_params[BEACON_HW_Q].txop_q = cpu_to_le16(0xffff); |
| 461 |
|
| 462 |
memcpy(&common->rate_pwr[0], &gc[0], 40); |
| 463 |
for (ii = 0; ii < 20; ii++) |
| 464 |
radio_caps->gcpd_per_rate[inx++] = |
| 465 |
cpu_to_le16(common->rate_pwr[ii] & 0x00FF); |
| 466 |
|
| 467 |
rsi_set_len_qno(&radio_caps->desc_dword0.len_qno, |
| 468 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 469 |
|
| 470 |
skb_put(skb, frame_len); |
| 471 |
|
| 472 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 473 |
} |
| 474 |
|
| 475 |
/** |
| 476 |
* rsi_mgmt_pkt_to_core() - This function is the entry point for Mgmt module. |
| 477 |
* @common: Pointer to the driver private structure. |
| 478 |
* @msg: Pointer to received packet. |
| 479 |
* @msg_len: Length of the received packet. |
| 480 |
* |
| 481 |
* Return: 0 on success, -1 on failure. |
| 482 |
*/ |
| 483 |
static int rsi_mgmt_pkt_to_core(struct rsi_common *common, |
| 484 |
u8 *msg, |
| 485 |
s32 msg_len) |
| 486 |
{ |
| 487 |
struct rsi_hw *adapter = common->priv; |
| 488 |
struct ieee80211_tx_info *info; |
| 489 |
struct skb_info *rx_params; |
| 490 |
u8 pad_bytes = msg[4]; |
| 491 |
struct sk_buff *skb; |
| 492 |
|
| 493 |
if (!adapter->sc_nvifs) |
| 494 |
return -ENOLINK; |
| 495 |
|
| 496 |
msg_len -= pad_bytes; |
| 497 |
if (msg_len <= 0) { |
| 498 |
rsi_dbg(MGMT_RX_ZONE, |
| 499 |
"%s: Invalid rx msg of len = %d\n", |
| 500 |
__func__, msg_len); |
| 501 |
return -EINVAL; |
| 502 |
} |
| 503 |
|
| 504 |
skb = dev_alloc_skb(msg_len); |
| 505 |
if (!skb) |
| 506 |
return -ENOMEM; |
| 507 |
|
| 508 |
skb_put_data(skb, |
| 509 |
(u8 *)(msg + FRAME_DESC_SZ + pad_bytes), |
| 510 |
msg_len); |
| 511 |
|
| 512 |
info = IEEE80211_SKB_CB(skb); |
| 513 |
rx_params = (struct skb_info *)info->driver_data; |
| 514 |
rx_params->rssi = rsi_get_rssi(msg); |
| 515 |
rx_params->channel = rsi_get_channel(msg); |
| 516 |
rsi_indicate_pkt_to_os(common, skb); |
| 517 |
|
| 518 |
return 0; |
| 519 |
} |
| 520 |
|
| 521 |
/** |
| 522 |
* rsi_hal_send_sta_notify_frame() - This function sends the station notify |
| 523 |
* frame to firmware. |
| 524 |
* @common: Pointer to the driver private structure. |
| 525 |
* @opmode: Operating mode of device. |
| 526 |
* @notify_event: Notification about station connection. |
| 527 |
* @bssid: bssid. |
| 528 |
* @qos_enable: Qos is enabled. |
| 529 |
* @aid: Aid (unique for all STA). |
| 530 |
* @sta_id: station id. |
| 531 |
* @vif: Pointer to the ieee80211_vif structure. |
| 532 |
* |
| 533 |
* Return: status: 0 on success, corresponding negative error code on failure. |
| 534 |
*/ |
| 535 |
int rsi_hal_send_sta_notify_frame(struct rsi_common *common, enum opmode opmode, |
| 536 |
u8 notify_event, const unsigned char *bssid, |
| 537 |
u8 qos_enable, u16 aid, u16 sta_id, |
| 538 |
struct ieee80211_vif *vif) |
| 539 |
{ |
| 540 |
struct sk_buff *skb = NULL; |
| 541 |
struct rsi_peer_notify *peer_notify; |
| 542 |
u16 vap_id = ((struct vif_priv *)vif->drv_priv)->vap_id; |
| 543 |
int status; |
| 544 |
u16 frame_len = sizeof(struct rsi_peer_notify); |
| 545 |
|
| 546 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending sta notify frame\n", __func__); |
| 547 |
|
| 548 |
skb = dev_alloc_skb(frame_len); |
| 549 |
|
| 550 |
if (!skb) { |
| 551 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 552 |
__func__); |
| 553 |
return -ENOMEM; |
| 554 |
} |
| 555 |
|
| 556 |
memset(skb->data, 0, frame_len); |
| 557 |
peer_notify = (struct rsi_peer_notify *)skb->data; |
| 558 |
|
| 559 |
if (opmode == RSI_OPMODE_STA) |
| 560 |
peer_notify->command = cpu_to_le16(PEER_TYPE_AP << 1); |
| 561 |
else if (opmode == RSI_OPMODE_AP) |
| 562 |
peer_notify->command = cpu_to_le16(PEER_TYPE_STA << 1); |
| 563 |
|
| 564 |
switch (notify_event) { |
| 565 |
case STA_CONNECTED: |
| 566 |
peer_notify->command |= cpu_to_le16(RSI_ADD_PEER); |
| 567 |
break; |
| 568 |
case STA_DISCONNECTED: |
| 569 |
peer_notify->command |= cpu_to_le16(RSI_DELETE_PEER); |
| 570 |
break; |
| 571 |
default: |
| 572 |
break; |
| 573 |
} |
| 574 |
|
| 575 |
peer_notify->command |= cpu_to_le16((aid & 0xfff) << 4); |
| 576 |
ether_addr_copy(peer_notify->mac_addr, bssid); |
| 577 |
peer_notify->mpdu_density = cpu_to_le16(RSI_MPDU_DENSITY); |
| 578 |
peer_notify->sta_flags = cpu_to_le32((qos_enable) ? 1 : 0); |
| 579 |
|
| 580 |
rsi_set_len_qno(&peer_notify->desc.desc_dword0.len_qno, |
| 581 |
(frame_len - FRAME_DESC_SZ), |
| 582 |
RSI_WIFI_MGMT_Q); |
| 583 |
peer_notify->desc.desc_dword0.frame_type = PEER_NOTIFY; |
| 584 |
peer_notify->desc.desc_dword3.qid_tid = sta_id; |
| 585 |
peer_notify->desc.desc_dword3.sta_id = vap_id; |
| 586 |
|
| 587 |
skb_put(skb, frame_len); |
| 588 |
|
| 589 |
status = rsi_send_internal_mgmt_frame(common, skb); |
| 590 |
|
| 591 |
if ((vif->type == NL80211_IFTYPE_STATION) && |
| 592 |
(!status && qos_enable)) { |
| 593 |
rsi_set_contention_vals(common); |
| 594 |
status = rsi_load_radio_caps(common); |
| 595 |
} |
| 596 |
return status; |
| 597 |
} |
| 598 |
|
| 599 |
/** |
| 600 |
* rsi_send_aggregation_params_frame() - This function sends the ampdu |
| 601 |
* indication frame to firmware. |
| 602 |
* @common: Pointer to the driver private structure. |
| 603 |
* @tid: traffic identifier. |
| 604 |
* @ssn: ssn. |
| 605 |
* @buf_size: buffer size. |
| 606 |
* @event: notification about station connection. |
| 607 |
* @sta_id: station id. |
| 608 |
* |
| 609 |
* Return: 0 on success, corresponding negative error code on failure. |
| 610 |
*/ |
| 611 |
int rsi_send_aggregation_params_frame(struct rsi_common *common, |
| 612 |
u16 tid, |
| 613 |
u16 ssn, |
| 614 |
u8 buf_size, |
| 615 |
u8 event, |
| 616 |
u8 sta_id) |
| 617 |
{ |
| 618 |
struct sk_buff *skb = NULL; |
| 619 |
struct rsi_aggr_params *aggr_params; |
| 620 |
u16 frame_len = sizeof(struct rsi_aggr_params); |
| 621 |
|
| 622 |
skb = dev_alloc_skb(frame_len); |
| 623 |
|
| 624 |
if (!skb) { |
| 625 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 626 |
__func__); |
| 627 |
return -ENOMEM; |
| 628 |
} |
| 629 |
|
| 630 |
memset(skb->data, 0, frame_len); |
| 631 |
aggr_params = (struct rsi_aggr_params *)skb->data; |
| 632 |
|
| 633 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending AMPDU indication frame\n", __func__); |
| 634 |
|
| 635 |
rsi_set_len_qno(&aggr_params->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q); |
| 636 |
aggr_params->desc_dword0.frame_type = AMPDU_IND; |
| 637 |
|
| 638 |
aggr_params->aggr_params = tid & RSI_AGGR_PARAMS_TID_MASK; |
| 639 |
aggr_params->peer_id = sta_id; |
| 640 |
if (event == STA_TX_ADDBA_DONE) { |
| 641 |
aggr_params->seq_start = cpu_to_le16(ssn); |
| 642 |
aggr_params->baw_size = cpu_to_le16(buf_size); |
| 643 |
aggr_params->aggr_params |= RSI_AGGR_PARAMS_START; |
| 644 |
} else if (event == STA_RX_ADDBA_DONE) { |
| 645 |
aggr_params->seq_start = cpu_to_le16(ssn); |
| 646 |
aggr_params->aggr_params |= (RSI_AGGR_PARAMS_START | |
| 647 |
RSI_AGGR_PARAMS_RX_AGGR); |
| 648 |
} else if (event == STA_RX_DELBA) { |
| 649 |
aggr_params->aggr_params |= RSI_AGGR_PARAMS_RX_AGGR; |
| 650 |
} |
| 651 |
|
| 652 |
skb_put(skb, frame_len); |
| 653 |
|
| 654 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 655 |
} |
| 656 |
|
| 657 |
/** |
| 658 |
* rsi_program_bb_rf() - This function starts base band and RF programming. |
| 659 |
* This is called after initial configurations are done. |
| 660 |
* @common: Pointer to the driver private structure. |
| 661 |
* |
| 662 |
* Return: 0 on success, corresponding negative error code on failure. |
| 663 |
*/ |
| 664 |
static int rsi_program_bb_rf(struct rsi_common *common) |
| 665 |
{ |
| 666 |
struct sk_buff *skb; |
| 667 |
struct rsi_bb_rf_prog *bb_rf_prog; |
| 668 |
u16 frame_len = sizeof(struct rsi_bb_rf_prog); |
| 669 |
|
| 670 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__); |
| 671 |
|
| 672 |
skb = dev_alloc_skb(frame_len); |
| 673 |
if (!skb) { |
| 674 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 675 |
__func__); |
| 676 |
return -ENOMEM; |
| 677 |
} |
| 678 |
|
| 679 |
memset(skb->data, 0, frame_len); |
| 680 |
bb_rf_prog = (struct rsi_bb_rf_prog *)skb->data; |
| 681 |
|
| 682 |
rsi_set_len_qno(&bb_rf_prog->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q); |
| 683 |
bb_rf_prog->desc_dword0.frame_type = BBP_PROG_IN_TA; |
| 684 |
bb_rf_prog->endpoint = common->endpoint; |
| 685 |
bb_rf_prog->rf_power_mode = common->wlan_rf_power_mode; |
| 686 |
|
| 687 |
if (common->rf_reset) { |
| 688 |
bb_rf_prog->flags = cpu_to_le16(RF_RESET_ENABLE); |
| 689 |
rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n", |
| 690 |
__func__); |
| 691 |
common->rf_reset = 0; |
| 692 |
} |
| 693 |
common->bb_rf_prog_count = 1; |
| 694 |
bb_rf_prog->flags |= cpu_to_le16(PUT_BBP_RESET | BBP_REG_WRITE | |
| 695 |
(RSI_RF_TYPE << 4)); |
| 696 |
skb_put(skb, frame_len); |
| 697 |
|
| 698 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 699 |
} |
| 700 |
|
| 701 |
/** |
| 702 |
* rsi_set_vap_capabilities() - This function send vap capability to firmware. |
| 703 |
* @common: Pointer to the driver private structure. |
| 704 |
* @mode: Operating mode of device. |
| 705 |
* @mac_addr: MAC address |
| 706 |
* @vap_id: Rate information - offset and mask |
| 707 |
* @vap_status: VAP status - ADD, DELETE or UPDATE |
| 708 |
* |
| 709 |
* Return: 0 on success, corresponding negative error code on failure. |
| 710 |
*/ |
| 711 |
int rsi_set_vap_capabilities(struct rsi_common *common, |
| 712 |
enum opmode mode, |
| 713 |
u8 *mac_addr, |
| 714 |
u8 vap_id, |
| 715 |
u8 vap_status) |
| 716 |
{ |
| 717 |
struct sk_buff *skb = NULL; |
| 718 |
struct rsi_vap_caps *vap_caps; |
| 719 |
struct rsi_hw *adapter = common->priv; |
| 720 |
struct ieee80211_hw *hw = adapter->hw; |
| 721 |
struct ieee80211_conf *conf = &hw->conf; |
| 722 |
u16 frame_len = sizeof(struct rsi_vap_caps); |
| 723 |
|
| 724 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__); |
| 725 |
|
| 726 |
skb = dev_alloc_skb(frame_len); |
| 727 |
if (!skb) { |
| 728 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 729 |
__func__); |
| 730 |
return -ENOMEM; |
| 731 |
} |
| 732 |
|
| 733 |
memset(skb->data, 0, frame_len); |
| 734 |
vap_caps = (struct rsi_vap_caps *)skb->data; |
| 735 |
|
| 736 |
rsi_set_len_qno(&vap_caps->desc_dword0.len_qno, |
| 737 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 738 |
vap_caps->desc_dword0.frame_type = VAP_CAPABILITIES; |
| 739 |
vap_caps->status = vap_status; |
| 740 |
vap_caps->vif_type = mode; |
| 741 |
vap_caps->channel_bw = common->channel_width; |
| 742 |
vap_caps->vap_id = vap_id; |
| 743 |
vap_caps->radioid_macid = ((common->mac_id & 0xf) << 4) | |
| 744 |
(common->radio_id & 0xf); |
| 745 |
|
| 746 |
memcpy(vap_caps->mac_addr, mac_addr, IEEE80211_ADDR_LEN); |
| 747 |
vap_caps->keep_alive_period = cpu_to_le16(90); |
| 748 |
vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD); |
| 749 |
|
| 750 |
vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold); |
| 751 |
|
| 752 |
if (common->band == NL80211_BAND_5GHZ) { |
| 753 |
vap_caps->default_ctrl_rate = cpu_to_le16(RSI_RATE_6); |
| 754 |
vap_caps->default_mgmt_rate = cpu_to_le32(RSI_RATE_6); |
| 755 |
} else { |
| 756 |
vap_caps->default_ctrl_rate = cpu_to_le16(RSI_RATE_1); |
| 757 |
vap_caps->default_mgmt_rate = cpu_to_le32(RSI_RATE_1); |
| 758 |
} |
| 759 |
if (conf_is_ht40(conf)) { |
| 760 |
if (conf_is_ht40_minus(conf)) |
| 761 |
vap_caps->ctrl_rate_flags = |
| 762 |
cpu_to_le16(UPPER_20_ENABLE); |
| 763 |
else if (conf_is_ht40_plus(conf)) |
| 764 |
vap_caps->ctrl_rate_flags = |
| 765 |
cpu_to_le16(LOWER_20_ENABLE); |
| 766 |
else |
| 767 |
vap_caps->ctrl_rate_flags = |
| 768 |
cpu_to_le16(FULL40M_ENABLE); |
| 769 |
} |
| 770 |
|
| 771 |
vap_caps->default_data_rate = 0; |
| 772 |
vap_caps->beacon_interval = cpu_to_le16(common->beacon_interval); |
| 773 |
vap_caps->dtim_period = cpu_to_le16(common->dtim_cnt); |
| 774 |
|
| 775 |
skb_put(skb, frame_len); |
| 776 |
|
| 777 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 778 |
} |
| 779 |
|
| 780 |
/** |
| 781 |
* rsi_hal_load_key() - This function is used to load keys within the firmware. |
| 782 |
* @common: Pointer to the driver private structure. |
| 783 |
* @data: Pointer to the key data. |
| 784 |
* @key_len: Key length to be loaded. |
| 785 |
* @key_type: Type of key: GROUP/PAIRWISE. |
| 786 |
* @key_id: Key index. |
| 787 |
* @cipher: Type of cipher used. |
| 788 |
* @sta_id: Station id. |
| 789 |
* @vif: Pointer to the ieee80211_vif structure. |
| 790 |
* |
| 791 |
* Return: 0 on success, -1 on failure. |
| 792 |
*/ |
| 793 |
int rsi_hal_load_key(struct rsi_common *common, |
| 794 |
u8 *data, |
| 795 |
u16 key_len, |
| 796 |
u8 key_type, |
| 797 |
u8 key_id, |
| 798 |
u32 cipher, |
| 799 |
s16 sta_id, |
| 800 |
struct ieee80211_vif *vif) |
| 801 |
{ |
| 802 |
struct sk_buff *skb = NULL; |
| 803 |
struct rsi_set_key *set_key; |
| 804 |
u16 key_descriptor = 0; |
| 805 |
u16 frame_len = sizeof(struct rsi_set_key); |
| 806 |
|
| 807 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__); |
| 808 |
|
| 809 |
skb = dev_alloc_skb(frame_len); |
| 810 |
if (!skb) { |
| 811 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 812 |
__func__); |
| 813 |
return -ENOMEM; |
| 814 |
} |
| 815 |
|
| 816 |
memset(skb->data, 0, frame_len); |
| 817 |
set_key = (struct rsi_set_key *)skb->data; |
| 818 |
|
| 819 |
if (key_type == RSI_GROUP_KEY) { |
| 820 |
key_descriptor = RSI_KEY_TYPE_BROADCAST; |
| 821 |
if (vif->type == NL80211_IFTYPE_AP) |
| 822 |
key_descriptor |= RSI_KEY_MODE_AP; |
| 823 |
} |
| 824 |
if ((cipher == WLAN_CIPHER_SUITE_WEP40) || |
| 825 |
(cipher == WLAN_CIPHER_SUITE_WEP104)) { |
| 826 |
key_id = 0; |
| 827 |
key_descriptor |= RSI_WEP_KEY; |
| 828 |
if (key_len >= 13) |
| 829 |
key_descriptor |= RSI_WEP_KEY_104; |
| 830 |
} else if (cipher != KEY_TYPE_CLEAR) { |
| 831 |
key_descriptor |= RSI_CIPHER_WPA; |
| 832 |
if (cipher == WLAN_CIPHER_SUITE_TKIP) |
| 833 |
key_descriptor |= RSI_CIPHER_TKIP; |
| 834 |
} |
| 835 |
key_descriptor |= RSI_PROTECT_DATA_FRAMES; |
| 836 |
key_descriptor |= (key_id << RSI_KEY_ID_OFFSET); |
| 837 |
|
| 838 |
rsi_set_len_qno(&set_key->desc_dword0.len_qno, |
| 839 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 840 |
set_key->desc_dword0.frame_type = SET_KEY_REQ; |
| 841 |
set_key->key_desc = cpu_to_le16(key_descriptor); |
| 842 |
set_key->sta_id = sta_id; |
| 843 |
|
| 844 |
if (data) { |
| 845 |
if ((cipher == WLAN_CIPHER_SUITE_WEP40) || |
| 846 |
(cipher == WLAN_CIPHER_SUITE_WEP104)) { |
| 847 |
memcpy(&set_key->key[key_id][1], data, key_len * 2); |
| 848 |
} else { |
| 849 |
memcpy(&set_key->key[0][0], data, key_len); |
| 850 |
} |
| 851 |
memcpy(set_key->tx_mic_key, &data[16], 8); |
| 852 |
memcpy(set_key->rx_mic_key, &data[24], 8); |
| 853 |
} else { |
| 854 |
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); |
| 855 |
} |
| 856 |
|
| 857 |
skb_put(skb, frame_len); |
| 858 |
|
| 859 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 860 |
} |
| 861 |
|
| 862 |
/* |
| 863 |
* This function sends the common device configuration parameters to device. |
| 864 |
* This frame includes the useful information to make device works on |
| 865 |
* specific operating mode. |
| 866 |
*/ |
| 867 |
static int rsi_send_common_dev_params(struct rsi_common *common) |
| 868 |
{ |
| 869 |
struct sk_buff *skb; |
| 870 |
u16 frame_len; |
| 871 |
struct rsi_config_vals *dev_cfgs; |
| 872 |
|
| 873 |
frame_len = sizeof(struct rsi_config_vals); |
| 874 |
|
| 875 |
rsi_dbg(MGMT_TX_ZONE, "Sending common device config params\n"); |
| 876 |
skb = dev_alloc_skb(frame_len); |
| 877 |
if (!skb) { |
| 878 |
rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__); |
| 879 |
return -ENOMEM; |
| 880 |
} |
| 881 |
|
| 882 |
memset(skb->data, 0, frame_len); |
| 883 |
|
| 884 |
dev_cfgs = (struct rsi_config_vals *)skb->data; |
| 885 |
memset(dev_cfgs, 0, (sizeof(struct rsi_config_vals))); |
| 886 |
|
| 887 |
rsi_set_len_qno(&dev_cfgs->len_qno, (frame_len - FRAME_DESC_SZ), |
| 888 |
RSI_COEX_Q); |
| 889 |
dev_cfgs->pkt_type = COMMON_DEV_CONFIG; |
| 890 |
|
| 891 |
dev_cfgs->lp_ps_handshake = common->lp_ps_handshake_mode; |
| 892 |
dev_cfgs->ulp_ps_handshake = common->ulp_ps_handshake_mode; |
| 893 |
|
| 894 |
dev_cfgs->unused_ulp_gpio = RSI_UNUSED_ULP_GPIO_BITMAP; |
| 895 |
dev_cfgs->unused_soc_gpio_bitmap = |
| 896 |
cpu_to_le32(RSI_UNUSED_SOC_GPIO_BITMAP); |
| 897 |
|
| 898 |
dev_cfgs->opermode = common->oper_mode; |
| 899 |
dev_cfgs->wlan_rf_pwr_mode = common->wlan_rf_power_mode; |
| 900 |
dev_cfgs->driver_mode = common->driver_mode; |
| 901 |
dev_cfgs->region_code = NL80211_DFS_FCC; |
| 902 |
dev_cfgs->antenna_sel_val = common->obm_ant_sel_val; |
| 903 |
|
| 904 |
skb_put(skb, frame_len); |
| 905 |
|
| 906 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 907 |
} |
| 908 |
|
| 909 |
/* |
| 910 |
* rsi_load_bootup_params() - This function send bootup params to the firmware. |
| 911 |
* @common: Pointer to the driver private structure. |
| 912 |
* |
| 913 |
* Return: 0 on success, corresponding error code on failure. |
| 914 |
*/ |
| 915 |
static int rsi_load_bootup_params(struct rsi_common *common) |
| 916 |
{ |
| 917 |
struct sk_buff *skb; |
| 918 |
struct rsi_boot_params *boot_params; |
| 919 |
|
| 920 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__); |
| 921 |
skb = dev_alloc_skb(sizeof(struct rsi_boot_params)); |
| 922 |
if (!skb) { |
| 923 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 924 |
__func__); |
| 925 |
return -ENOMEM; |
| 926 |
} |
| 927 |
|
| 928 |
memset(skb->data, 0, sizeof(struct rsi_boot_params)); |
| 929 |
boot_params = (struct rsi_boot_params *)skb->data; |
| 930 |
|
| 931 |
rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__); |
| 932 |
|
| 933 |
if (common->channel_width == BW_40MHZ) { |
| 934 |
memcpy(&boot_params->bootup_params, |
| 935 |
&boot_params_40, |
| 936 |
sizeof(struct bootup_params)); |
| 937 |
rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__, |
| 938 |
UMAC_CLK_40BW); |
| 939 |
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW); |
| 940 |
} else { |
| 941 |
memcpy(&boot_params->bootup_params, |
| 942 |
&boot_params_20, |
| 943 |
sizeof(struct bootup_params)); |
| 944 |
if (boot_params_20.valid != cpu_to_le32(VALID_20)) { |
| 945 |
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW); |
| 946 |
rsi_dbg(MGMT_TX_ZONE, |
| 947 |
"%s: Packet 20MHZ <=== %d\n", __func__, |
| 948 |
UMAC_CLK_20BW); |
| 949 |
} else { |
| 950 |
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ); |
| 951 |
rsi_dbg(MGMT_TX_ZONE, |
| 952 |
"%s: Packet 20MHZ <=== %d\n", __func__, |
| 953 |
UMAC_CLK_40MHZ); |
| 954 |
} |
| 955 |
} |
| 956 |
|
| 957 |
/** |
| 958 |
* Bit{0:11} indicates length of the Packet |
| 959 |
* Bit{12:15} indicates host queue number |
| 960 |
*/ |
| 961 |
boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) | |
| 962 |
(RSI_WIFI_MGMT_Q << 12)); |
| 963 |
boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST); |
| 964 |
|
| 965 |
skb_put(skb, sizeof(struct rsi_boot_params)); |
| 966 |
|
| 967 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 968 |
} |
| 969 |
|
| 970 |
static int rsi_load_9116_bootup_params(struct rsi_common *common) |
| 971 |
{ |
| 972 |
struct sk_buff *skb; |
| 973 |
struct rsi_boot_params_9116 *boot_params; |
| 974 |
|
| 975 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__); |
| 976 |
|
| 977 |
skb = dev_alloc_skb(sizeof(struct rsi_boot_params_9116)); |
| 978 |
if (!skb) |
| 979 |
return -ENOMEM; |
| 980 |
memset(skb->data, 0, sizeof(struct rsi_boot_params)); |
| 981 |
boot_params = (struct rsi_boot_params_9116 *)skb->data; |
| 982 |
|
| 983 |
if (common->channel_width == BW_40MHZ) { |
| 984 |
memcpy(&boot_params->bootup_params, |
| 985 |
&boot_params_9116_40, |
| 986 |
sizeof(struct bootup_params_9116)); |
| 987 |
rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__, |
| 988 |
UMAC_CLK_40BW); |
| 989 |
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_40BW); |
| 990 |
} else { |
| 991 |
memcpy(&boot_params->bootup_params, |
| 992 |
&boot_params_9116_20, |
| 993 |
sizeof(struct bootup_params_9116)); |
| 994 |
if (boot_params_20.valid != cpu_to_le32(VALID_20)) { |
| 995 |
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_20BW); |
| 996 |
rsi_dbg(MGMT_TX_ZONE, |
| 997 |
"%s: Packet 20MHZ <=== %d\n", __func__, |
| 998 |
UMAC_CLK_20BW); |
| 999 |
} else { |
| 1000 |
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_40MHZ); |
| 1001 |
rsi_dbg(MGMT_TX_ZONE, |
| 1002 |
"%s: Packet 20MHZ <=== %d\n", __func__, |
| 1003 |
UMAC_CLK_40MHZ); |
| 1004 |
} |
| 1005 |
} |
| 1006 |
rsi_set_len_qno(&boot_params->desc_dword0.len_qno, |
| 1007 |
sizeof(struct bootup_params_9116), RSI_WIFI_MGMT_Q); |
| 1008 |
boot_params->desc_dword0.frame_type = BOOTUP_PARAMS_REQUEST; |
| 1009 |
skb_put(skb, sizeof(struct rsi_boot_params_9116)); |
| 1010 |
|
| 1011 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1012 |
} |
| 1013 |
|
| 1014 |
/** |
| 1015 |
* rsi_send_reset_mac() - This function prepares reset MAC request and sends an |
| 1016 |
* internal management frame to indicate it to firmware. |
| 1017 |
* @common: Pointer to the driver private structure. |
| 1018 |
* |
| 1019 |
* Return: 0 on success, corresponding error code on failure. |
| 1020 |
*/ |
| 1021 |
static int rsi_send_reset_mac(struct rsi_common *common) |
| 1022 |
{ |
| 1023 |
struct sk_buff *skb; |
| 1024 |
struct rsi_mac_frame *mgmt_frame; |
| 1025 |
|
| 1026 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__); |
| 1027 |
|
| 1028 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1029 |
if (!skb) { |
| 1030 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1031 |
__func__); |
| 1032 |
return -ENOMEM; |
| 1033 |
} |
| 1034 |
|
| 1035 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1036 |
mgmt_frame = (struct rsi_mac_frame *)skb->data; |
| 1037 |
|
| 1038 |
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); |
| 1039 |
mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ); |
| 1040 |
mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8); |
| 1041 |
|
| 1042 |
#define RSI_9116_DEF_TA_AGGR 3 |
| 1043 |
if (common->priv->device_model == RSI_DEV_9116) |
| 1044 |
mgmt_frame->desc_word[3] |= |
| 1045 |
cpu_to_le16(RSI_9116_DEF_TA_AGGR << 8); |
| 1046 |
|
| 1047 |
skb_put(skb, FRAME_DESC_SZ); |
| 1048 |
|
| 1049 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1050 |
} |
| 1051 |
|
| 1052 |
/** |
| 1053 |
* rsi_band_check() - This function programs the band |
| 1054 |
* @common: Pointer to the driver private structure. |
| 1055 |
* @curchan: Pointer to the current channel structure. |
| 1056 |
* |
| 1057 |
* Return: 0 on success, corresponding error code on failure. |
| 1058 |
*/ |
| 1059 |
int rsi_band_check(struct rsi_common *common, |
| 1060 |
struct ieee80211_channel *curchan) |
| 1061 |
{ |
| 1062 |
struct rsi_hw *adapter = common->priv; |
| 1063 |
struct ieee80211_hw *hw = adapter->hw; |
| 1064 |
u8 prev_bw = common->channel_width; |
| 1065 |
u8 prev_ep = common->endpoint; |
| 1066 |
int status = 0; |
| 1067 |
|
| 1068 |
if (common->band != curchan->band) { |
| 1069 |
common->rf_reset = 1; |
| 1070 |
common->band = curchan->band; |
| 1071 |
} |
| 1072 |
|
| 1073 |
if ((hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) || |
| 1074 |
(hw->conf.chandef.width == NL80211_CHAN_WIDTH_20)) |
| 1075 |
common->channel_width = BW_20MHZ; |
| 1076 |
else |
| 1077 |
common->channel_width = BW_40MHZ; |
| 1078 |
|
| 1079 |
if (common->band == NL80211_BAND_2GHZ) { |
| 1080 |
if (common->channel_width) |
| 1081 |
common->endpoint = EP_2GHZ_40MHZ; |
| 1082 |
else |
| 1083 |
common->endpoint = EP_2GHZ_20MHZ; |
| 1084 |
} else { |
| 1085 |
if (common->channel_width) |
| 1086 |
common->endpoint = EP_5GHZ_40MHZ; |
| 1087 |
else |
| 1088 |
common->endpoint = EP_5GHZ_20MHZ; |
| 1089 |
} |
| 1090 |
|
| 1091 |
if (common->endpoint != prev_ep) { |
| 1092 |
status = rsi_program_bb_rf(common); |
| 1093 |
if (status) |
| 1094 |
return status; |
| 1095 |
} |
| 1096 |
|
| 1097 |
if (common->channel_width != prev_bw) { |
| 1098 |
if (adapter->device_model == RSI_DEV_9116) |
| 1099 |
status = rsi_load_9116_bootup_params(common); |
| 1100 |
else |
| 1101 |
status = rsi_load_bootup_params(common); |
| 1102 |
if (status) |
| 1103 |
return status; |
| 1104 |
|
| 1105 |
status = rsi_load_radio_caps(common); |
| 1106 |
if (status) |
| 1107 |
return status; |
| 1108 |
} |
| 1109 |
|
| 1110 |
return status; |
| 1111 |
} |
| 1112 |
|
| 1113 |
/** |
| 1114 |
* rsi_set_channel() - This function programs the channel. |
| 1115 |
* @common: Pointer to the driver private structure. |
| 1116 |
* @channel: Channel value to be set. |
| 1117 |
* |
| 1118 |
* Return: 0 on success, corresponding error code on failure. |
| 1119 |
*/ |
| 1120 |
int rsi_set_channel(struct rsi_common *common, |
| 1121 |
struct ieee80211_channel *channel) |
| 1122 |
{ |
| 1123 |
struct sk_buff *skb = NULL; |
| 1124 |
struct rsi_chan_config *chan_cfg; |
| 1125 |
u16 frame_len = sizeof(struct rsi_chan_config); |
| 1126 |
|
| 1127 |
rsi_dbg(MGMT_TX_ZONE, |
| 1128 |
"%s: Sending scan req frame\n", __func__); |
| 1129 |
|
| 1130 |
if (!channel) |
| 1131 |
return 0; |
| 1132 |
|
| 1133 |
skb = dev_alloc_skb(frame_len); |
| 1134 |
if (!skb) { |
| 1135 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1136 |
__func__); |
| 1137 |
return -ENOMEM; |
| 1138 |
} |
| 1139 |
|
| 1140 |
memset(skb->data, 0, frame_len); |
| 1141 |
chan_cfg = (struct rsi_chan_config *)skb->data; |
| 1142 |
|
| 1143 |
rsi_set_len_qno(&chan_cfg->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q); |
| 1144 |
chan_cfg->desc_dword0.frame_type = SCAN_REQUEST; |
| 1145 |
chan_cfg->channel_number = channel->hw_value; |
| 1146 |
chan_cfg->antenna_gain_offset_2g = channel->max_antenna_gain; |
| 1147 |
chan_cfg->antenna_gain_offset_5g = channel->max_antenna_gain; |
| 1148 |
chan_cfg->region_rftype = (RSI_RF_TYPE & 0xf) << 4; |
| 1149 |
|
| 1150 |
if ((channel->flags & IEEE80211_CHAN_NO_IR) || |
| 1151 |
(channel->flags & IEEE80211_CHAN_RADAR)) { |
| 1152 |
chan_cfg->antenna_gain_offset_2g |= RSI_CHAN_RADAR; |
| 1153 |
} else { |
| 1154 |
if (common->tx_power < channel->max_power) |
| 1155 |
chan_cfg->tx_power = cpu_to_le16(common->tx_power); |
| 1156 |
else |
| 1157 |
chan_cfg->tx_power = cpu_to_le16(channel->max_power); |
| 1158 |
} |
| 1159 |
chan_cfg->region_rftype |= (common->priv->dfs_region & 0xf); |
| 1160 |
|
| 1161 |
if (common->channel_width == BW_40MHZ) |
| 1162 |
chan_cfg->channel_width = 0x1; |
| 1163 |
|
| 1164 |
common->channel = channel->hw_value; |
| 1165 |
|
| 1166 |
skb_put(skb, frame_len); |
| 1167 |
|
| 1168 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1169 |
} |
| 1170 |
|
| 1171 |
/** |
| 1172 |
* rsi_send_radio_params_update() - This function sends the radio |
| 1173 |
* parameters update to device |
| 1174 |
* @common: Pointer to the driver private structure. |
| 1175 |
* |
| 1176 |
* Return: 0 on success, corresponding error code on failure. |
| 1177 |
*/ |
| 1178 |
int rsi_send_radio_params_update(struct rsi_common *common) |
| 1179 |
{ |
| 1180 |
struct rsi_mac_frame *cmd_frame; |
| 1181 |
struct sk_buff *skb = NULL; |
| 1182 |
|
| 1183 |
rsi_dbg(MGMT_TX_ZONE, |
| 1184 |
"%s: Sending Radio Params update frame\n", __func__); |
| 1185 |
|
| 1186 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1187 |
if (!skb) { |
| 1188 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1189 |
__func__); |
| 1190 |
return -ENOMEM; |
| 1191 |
} |
| 1192 |
|
| 1193 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1194 |
cmd_frame = (struct rsi_mac_frame *)skb->data; |
| 1195 |
|
| 1196 |
cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); |
| 1197 |
cmd_frame->desc_word[1] = cpu_to_le16(RADIO_PARAMS_UPDATE); |
| 1198 |
cmd_frame->desc_word[3] = cpu_to_le16(BIT(0)); |
| 1199 |
|
| 1200 |
cmd_frame->desc_word[3] |= cpu_to_le16(common->tx_power << 8); |
| 1201 |
|
| 1202 |
skb_put(skb, FRAME_DESC_SZ); |
| 1203 |
|
| 1204 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1205 |
} |
| 1206 |
|
| 1207 |
/* This function programs the threshold. */ |
| 1208 |
int rsi_send_vap_dynamic_update(struct rsi_common *common) |
| 1209 |
{ |
| 1210 |
struct sk_buff *skb; |
| 1211 |
struct rsi_dynamic_s *dynamic_frame; |
| 1212 |
|
| 1213 |
rsi_dbg(MGMT_TX_ZONE, |
| 1214 |
"%s: Sending vap update indication frame\n", __func__); |
| 1215 |
|
| 1216 |
skb = dev_alloc_skb(sizeof(struct rsi_dynamic_s)); |
| 1217 |
if (!skb) |
| 1218 |
return -ENOMEM; |
| 1219 |
|
| 1220 |
memset(skb->data, 0, sizeof(struct rsi_dynamic_s)); |
| 1221 |
dynamic_frame = (struct rsi_dynamic_s *)skb->data; |
| 1222 |
rsi_set_len_qno(&dynamic_frame->desc_dword0.len_qno, |
| 1223 |
sizeof(dynamic_frame->frame_body), RSI_WIFI_MGMT_Q); |
| 1224 |
|
| 1225 |
dynamic_frame->desc_dword0.frame_type = VAP_DYNAMIC_UPDATE; |
| 1226 |
dynamic_frame->desc_dword2.pkt_info = |
| 1227 |
cpu_to_le32(common->rts_threshold); |
| 1228 |
|
| 1229 |
if (common->wow_flags & RSI_WOW_ENABLED) { |
| 1230 |
/* Beacon miss threshold */ |
| 1231 |
dynamic_frame->desc_dword3.token = |
| 1232 |
cpu_to_le16(RSI_BCN_MISS_THRESHOLD); |
| 1233 |
dynamic_frame->frame_body.keep_alive_period = |
| 1234 |
cpu_to_le16(RSI_WOW_KEEPALIVE); |
| 1235 |
} else { |
| 1236 |
dynamic_frame->frame_body.keep_alive_period = |
| 1237 |
cpu_to_le16(RSI_DEF_KEEPALIVE); |
| 1238 |
} |
| 1239 |
|
| 1240 |
dynamic_frame->desc_dword3.sta_id = 0; /* vap id */ |
| 1241 |
|
| 1242 |
skb_put(skb, sizeof(struct rsi_dynamic_s)); |
| 1243 |
|
| 1244 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1245 |
} |
| 1246 |
|
| 1247 |
/** |
| 1248 |
* rsi_compare() - This function is used to compare two integers |
| 1249 |
* @a: pointer to the first integer |
| 1250 |
* @b: pointer to the second integer |
| 1251 |
* |
| 1252 |
* Return: 0 if both are equal, -1 if the first is smaller, else 1 |
| 1253 |
*/ |
| 1254 |
static int rsi_compare(const void *a, const void *b) |
| 1255 |
{ |
| 1256 |
u16 _a = *(const u16 *)(a); |
| 1257 |
u16 _b = *(const u16 *)(b); |
| 1258 |
|
| 1259 |
if (_a > _b) |
| 1260 |
return -1; |
| 1261 |
|
| 1262 |
if (_a < _b) |
| 1263 |
return 1; |
| 1264 |
|
| 1265 |
return 0; |
| 1266 |
} |
| 1267 |
|
| 1268 |
/** |
| 1269 |
* rsi_map_rates() - This function is used to map selected rates to hw rates. |
| 1270 |
* @rate: The standard rate to be mapped. |
| 1271 |
* @offset: Offset that will be returned. |
| 1272 |
* |
| 1273 |
* Return: 0 if it is a mcs rate, else 1 |
| 1274 |
*/ |
| 1275 |
static bool rsi_map_rates(u16 rate, int *offset) |
| 1276 |
{ |
| 1277 |
int kk; |
| 1278 |
for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) { |
| 1279 |
if (rate == mcs[kk]) { |
| 1280 |
*offset = kk; |
| 1281 |
return false; |
| 1282 |
} |
| 1283 |
} |
| 1284 |
|
| 1285 |
for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) { |
| 1286 |
if (rate == rsi_rates[kk].bitrate / 5) { |
| 1287 |
*offset = kk; |
| 1288 |
break; |
| 1289 |
} |
| 1290 |
} |
| 1291 |
return true; |
| 1292 |
} |
| 1293 |
|
| 1294 |
/** |
| 1295 |
* rsi_send_auto_rate_request() - This function is to set rates for connection |
| 1296 |
* and send autorate request to firmware. |
| 1297 |
* @common: Pointer to the driver private structure. |
| 1298 |
* @sta: mac80211 station. |
| 1299 |
* @sta_id: station id. |
| 1300 |
* @vif: Pointer to the ieee80211_vif structure. |
| 1301 |
* |
| 1302 |
* Return: 0 on success, corresponding error code on failure. |
| 1303 |
*/ |
| 1304 |
static int rsi_send_auto_rate_request(struct rsi_common *common, |
| 1305 |
struct ieee80211_sta *sta, |
| 1306 |
u16 sta_id, |
| 1307 |
struct ieee80211_vif *vif) |
| 1308 |
{ |
| 1309 |
struct sk_buff *skb; |
| 1310 |
struct rsi_auto_rate *auto_rate; |
| 1311 |
int ii = 0, jj = 0, kk = 0; |
| 1312 |
struct ieee80211_hw *hw = common->priv->hw; |
| 1313 |
u8 band = hw->conf.chandef.chan->band; |
| 1314 |
u8 num_supported_rates = 0; |
| 1315 |
u8 rate_table_offset, rate_offset = 0; |
| 1316 |
u32 rate_bitmap, configured_rates; |
| 1317 |
u16 *selected_rates, min_rate; |
| 1318 |
bool is_ht = false, is_sgi = false; |
| 1319 |
u16 frame_len = sizeof(struct rsi_auto_rate); |
| 1320 |
|
| 1321 |
rsi_dbg(MGMT_TX_ZONE, |
| 1322 |
"%s: Sending auto rate request frame\n", __func__); |
| 1323 |
|
| 1324 |
skb = dev_alloc_skb(frame_len); |
| 1325 |
if (!skb) { |
| 1326 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1327 |
__func__); |
| 1328 |
return -ENOMEM; |
| 1329 |
} |
| 1330 |
|
| 1331 |
memset(skb->data, 0, frame_len); |
| 1332 |
selected_rates = kzalloc(2 * RSI_TBL_SZ, GFP_KERNEL); |
| 1333 |
if (!selected_rates) { |
| 1334 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n", |
| 1335 |
__func__); |
| 1336 |
dev_kfree_skb(skb); |
| 1337 |
return -ENOMEM; |
| 1338 |
} |
| 1339 |
|
| 1340 |
auto_rate = (struct rsi_auto_rate *)skb->data; |
| 1341 |
|
| 1342 |
auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f)); |
| 1343 |
auto_rate->collision_tolerance = cpu_to_le16(3); |
| 1344 |
auto_rate->failure_limit = cpu_to_le16(3); |
| 1345 |
auto_rate->initial_boundary = cpu_to_le16(3); |
| 1346 |
auto_rate->max_threshold_limt = cpu_to_le16(27); |
| 1347 |
|
| 1348 |
auto_rate->desc.desc_dword0.frame_type = AUTO_RATE_IND; |
| 1349 |
|
| 1350 |
if (common->channel_width == BW_40MHZ) |
| 1351 |
auto_rate->desc.desc_dword3.qid_tid = BW_40MHZ; |
| 1352 |
auto_rate->desc.desc_dword3.sta_id = sta_id; |
| 1353 |
|
| 1354 |
if (vif->type == NL80211_IFTYPE_STATION) { |
| 1355 |
rate_bitmap = common->bitrate_mask[band]; |
| 1356 |
is_ht = common->vif_info[0].is_ht; |
| 1357 |
is_sgi = common->vif_info[0].sgi; |
| 1358 |
} else { |
| 1359 |
rate_bitmap = sta->deflink.supp_rates[band]; |
| 1360 |
is_ht = sta->deflink.ht_cap.ht_supported; |
| 1361 |
if ((sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_20) || |
| 1362 |
(sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_40)) |
| 1363 |
is_sgi = true; |
| 1364 |
} |
| 1365 |
|
| 1366 |
/* Limit to any rates administratively configured by cfg80211 */ |
| 1367 |
configured_rates = common->rate_config[band].configured_mask ?: 0xffffffff; |
| 1368 |
rate_bitmap &= configured_rates; |
| 1369 |
|
| 1370 |
if (band == NL80211_BAND_2GHZ) { |
| 1371 |
if ((rate_bitmap == 0) && (is_ht)) |
| 1372 |
min_rate = RSI_RATE_MCS0; |
| 1373 |
else |
| 1374 |
min_rate = RSI_RATE_1; |
| 1375 |
rate_table_offset = 0; |
| 1376 |
} else { |
| 1377 |
if ((rate_bitmap == 0) && (is_ht)) |
| 1378 |
min_rate = RSI_RATE_MCS0; |
| 1379 |
else |
| 1380 |
min_rate = RSI_RATE_6; |
| 1381 |
rate_table_offset = 4; |
| 1382 |
} |
| 1383 |
|
| 1384 |
for (ii = 0, jj = 0; |
| 1385 |
ii < (ARRAY_SIZE(rsi_rates) - rate_table_offset); ii++) { |
| 1386 |
if (rate_bitmap & BIT(ii)) { |
| 1387 |
selected_rates[jj++] = |
| 1388 |
(rsi_rates[ii + rate_table_offset].bitrate / 5); |
| 1389 |
rate_offset++; |
| 1390 |
} |
| 1391 |
} |
| 1392 |
num_supported_rates = jj; |
| 1393 |
|
| 1394 |
if (is_ht) { |
| 1395 |
for (ii = 0; ii < ARRAY_SIZE(mcs); ii++) { |
| 1396 |
if (configured_rates & BIT(ii + ARRAY_SIZE(rsi_rates))) { |
| 1397 |
selected_rates[jj++] = mcs[ii]; |
| 1398 |
num_supported_rates++; |
| 1399 |
rate_offset++; |
| 1400 |
} |
| 1401 |
} |
| 1402 |
} |
| 1403 |
|
| 1404 |
sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL); |
| 1405 |
|
| 1406 |
/* mapping the rates to RSI rates */ |
| 1407 |
for (ii = 0; ii < jj; ii++) { |
| 1408 |
if (rsi_map_rates(selected_rates[ii], &kk)) { |
| 1409 |
auto_rate->supported_rates[ii] = |
| 1410 |
cpu_to_le16(rsi_rates[kk].hw_value); |
| 1411 |
} else { |
| 1412 |
auto_rate->supported_rates[ii] = |
| 1413 |
cpu_to_le16(rsi_mcsrates[kk]); |
| 1414 |
} |
| 1415 |
} |
| 1416 |
|
| 1417 |
/* loading HT rates in the bottom half of the auto rate table */ |
| 1418 |
if (is_ht) { |
| 1419 |
for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1; |
| 1420 |
ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) { |
| 1421 |
if (is_sgi || conf_is_ht40(&common->priv->hw->conf)) |
| 1422 |
auto_rate->supported_rates[ii++] = |
| 1423 |
cpu_to_le16(rsi_mcsrates[kk] | BIT(9)); |
| 1424 |
else |
| 1425 |
auto_rate->supported_rates[ii++] = |
| 1426 |
cpu_to_le16(rsi_mcsrates[kk]); |
| 1427 |
auto_rate->supported_rates[ii] = |
| 1428 |
cpu_to_le16(rsi_mcsrates[kk--]); |
| 1429 |
} |
| 1430 |
|
| 1431 |
for (; ii < (RSI_TBL_SZ - 1); ii++) { |
| 1432 |
auto_rate->supported_rates[ii] = |
| 1433 |
cpu_to_le16(rsi_mcsrates[0]); |
| 1434 |
} |
| 1435 |
} |
| 1436 |
|
| 1437 |
for (; ii < RSI_TBL_SZ; ii++) |
| 1438 |
auto_rate->supported_rates[ii] = cpu_to_le16(min_rate); |
| 1439 |
|
| 1440 |
auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2); |
| 1441 |
auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2); |
| 1442 |
num_supported_rates *= 2; |
| 1443 |
|
| 1444 |
rsi_set_len_qno(&auto_rate->desc.desc_dword0.len_qno, |
| 1445 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 1446 |
|
| 1447 |
skb_put(skb, frame_len); |
| 1448 |
kfree(selected_rates); |
| 1449 |
|
| 1450 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1451 |
} |
| 1452 |
|
| 1453 |
/** |
| 1454 |
* rsi_inform_bss_status() - This function informs about bss status with the |
| 1455 |
* help of sta notify params by sending an internal |
| 1456 |
* management frame to firmware. |
| 1457 |
* @common: Pointer to the driver private structure. |
| 1458 |
* @opmode: Operating mode of device. |
| 1459 |
* @status: Bss status type. |
| 1460 |
* @addr: Address of the register. |
| 1461 |
* @qos_enable: Qos is enabled. |
| 1462 |
* @aid: Aid (unique for all STAs). |
| 1463 |
* @sta: mac80211 station. |
| 1464 |
* @sta_id: station id. |
| 1465 |
* @assoc_cap: capabilities. |
| 1466 |
* @vif: Pointer to the ieee80211_vif structure. |
| 1467 |
* |
| 1468 |
* Return: None. |
| 1469 |
*/ |
| 1470 |
void rsi_inform_bss_status(struct rsi_common *common, |
| 1471 |
enum opmode opmode, |
| 1472 |
u8 status, |
| 1473 |
const u8 *addr, |
| 1474 |
u8 qos_enable, |
| 1475 |
u16 aid, |
| 1476 |
struct ieee80211_sta *sta, |
| 1477 |
u16 sta_id, |
| 1478 |
u16 assoc_cap, |
| 1479 |
struct ieee80211_vif *vif) |
| 1480 |
{ |
| 1481 |
if (status) { |
| 1482 |
if (opmode == RSI_OPMODE_STA) |
| 1483 |
common->hw_data_qs_blocked = true; |
| 1484 |
rsi_hal_send_sta_notify_frame(common, |
| 1485 |
opmode, |
| 1486 |
STA_CONNECTED, |
| 1487 |
addr, |
| 1488 |
qos_enable, |
| 1489 |
aid, sta_id, |
| 1490 |
vif); |
| 1491 |
if (!common->rate_config[common->band].fixed_enabled) |
| 1492 |
rsi_send_auto_rate_request(common, sta, sta_id, vif); |
| 1493 |
if (opmode == RSI_OPMODE_STA && |
| 1494 |
!(assoc_cap & WLAN_CAPABILITY_PRIVACY) && |
| 1495 |
!rsi_send_block_unblock_frame(common, false)) |
| 1496 |
common->hw_data_qs_blocked = false; |
| 1497 |
} else { |
| 1498 |
if (opmode == RSI_OPMODE_STA) |
| 1499 |
common->hw_data_qs_blocked = true; |
| 1500 |
|
| 1501 |
if (!(common->wow_flags & RSI_WOW_ENABLED)) |
| 1502 |
rsi_hal_send_sta_notify_frame(common, opmode, |
| 1503 |
STA_DISCONNECTED, addr, |
| 1504 |
qos_enable, aid, sta_id, |
| 1505 |
vif); |
| 1506 |
if (opmode == RSI_OPMODE_STA) |
| 1507 |
rsi_send_block_unblock_frame(common, true); |
| 1508 |
} |
| 1509 |
} |
| 1510 |
|
| 1511 |
/** |
| 1512 |
* rsi_eeprom_read() - This function sends a frame to read the mac address |
| 1513 |
* from the eeprom. |
| 1514 |
* @common: Pointer to the driver private structure. |
| 1515 |
* |
| 1516 |
* Return: 0 on success, -1 on failure. |
| 1517 |
*/ |
| 1518 |
static int rsi_eeprom_read(struct rsi_common *common) |
| 1519 |
{ |
| 1520 |
struct rsi_eeprom_read_frame *mgmt_frame; |
| 1521 |
struct rsi_hw *adapter = common->priv; |
| 1522 |
struct sk_buff *skb; |
| 1523 |
|
| 1524 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__); |
| 1525 |
|
| 1526 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1527 |
if (!skb) { |
| 1528 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1529 |
__func__); |
| 1530 |
return -ENOMEM; |
| 1531 |
} |
| 1532 |
|
| 1533 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1534 |
mgmt_frame = (struct rsi_eeprom_read_frame *)skb->data; |
| 1535 |
|
| 1536 |
/* FrameType */ |
| 1537 |
rsi_set_len_qno(&mgmt_frame->len_qno, 0, RSI_WIFI_MGMT_Q); |
| 1538 |
mgmt_frame->pkt_type = EEPROM_READ; |
| 1539 |
|
| 1540 |
/* Number of bytes to read */ |
| 1541 |
mgmt_frame->pkt_info = |
| 1542 |
cpu_to_le32((adapter->eeprom.length << RSI_EEPROM_LEN_OFFSET) & |
| 1543 |
RSI_EEPROM_LEN_MASK); |
| 1544 |
mgmt_frame->pkt_info |= cpu_to_le32((3 << RSI_EEPROM_HDR_SIZE_OFFSET) & |
| 1545 |
RSI_EEPROM_HDR_SIZE_MASK); |
| 1546 |
|
| 1547 |
/* Address to read */ |
| 1548 |
mgmt_frame->eeprom_offset = cpu_to_le32(adapter->eeprom.offset); |
| 1549 |
|
| 1550 |
skb_put(skb, FRAME_DESC_SZ); |
| 1551 |
|
| 1552 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1553 |
} |
| 1554 |
|
| 1555 |
/** |
| 1556 |
* rsi_send_block_unblock_frame() - This function sends a frame to block/unblock |
| 1557 |
* data queues in the firmware |
| 1558 |
* |
| 1559 |
* @common: Pointer to the driver private structure. |
| 1560 |
* @block_event: Event block if true, unblock if false |
| 1561 |
* returns 0 on success, -1 on failure. |
| 1562 |
*/ |
| 1563 |
int rsi_send_block_unblock_frame(struct rsi_common *common, bool block_event) |
| 1564 |
{ |
| 1565 |
struct rsi_block_unblock_data *mgmt_frame; |
| 1566 |
struct sk_buff *skb; |
| 1567 |
|
| 1568 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending block/unblock frame\n", __func__); |
| 1569 |
|
| 1570 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1571 |
if (!skb) { |
| 1572 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1573 |
__func__); |
| 1574 |
return -ENOMEM; |
| 1575 |
} |
| 1576 |
|
| 1577 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1578 |
mgmt_frame = (struct rsi_block_unblock_data *)skb->data; |
| 1579 |
|
| 1580 |
rsi_set_len_qno(&mgmt_frame->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q); |
| 1581 |
mgmt_frame->desc_dword0.frame_type = BLOCK_HW_QUEUE; |
| 1582 |
mgmt_frame->host_quiet_info = QUIET_INFO_VALID; |
| 1583 |
|
| 1584 |
if (block_event) { |
| 1585 |
rsi_dbg(INFO_ZONE, "blocking the data qs\n"); |
| 1586 |
mgmt_frame->block_q_bitmap = cpu_to_le16(0xf); |
| 1587 |
mgmt_frame->block_q_bitmap |= cpu_to_le16(0xf << 4); |
| 1588 |
} else { |
| 1589 |
rsi_dbg(INFO_ZONE, "unblocking the data qs\n"); |
| 1590 |
mgmt_frame->unblock_q_bitmap = cpu_to_le16(0xf); |
| 1591 |
mgmt_frame->unblock_q_bitmap |= cpu_to_le16(0xf << 4); |
| 1592 |
} |
| 1593 |
|
| 1594 |
skb_put(skb, FRAME_DESC_SZ); |
| 1595 |
|
| 1596 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1597 |
} |
| 1598 |
|
| 1599 |
/** |
| 1600 |
* rsi_send_rx_filter_frame() - Sends a frame to filter the RX packets |
| 1601 |
* |
| 1602 |
* @common: Pointer to the driver private structure. |
| 1603 |
* @rx_filter_word: Flags of filter packets |
| 1604 |
* |
| 1605 |
* Returns 0 on success, -1 on failure. |
| 1606 |
*/ |
| 1607 |
int rsi_send_rx_filter_frame(struct rsi_common *common, u16 rx_filter_word) |
| 1608 |
{ |
| 1609 |
struct rsi_mac_frame *cmd_frame; |
| 1610 |
struct sk_buff *skb; |
| 1611 |
|
| 1612 |
rsi_dbg(MGMT_TX_ZONE, "Sending RX filter frame\n"); |
| 1613 |
|
| 1614 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1615 |
if (!skb) { |
| 1616 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1617 |
__func__); |
| 1618 |
return -ENOMEM; |
| 1619 |
} |
| 1620 |
|
| 1621 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1622 |
cmd_frame = (struct rsi_mac_frame *)skb->data; |
| 1623 |
|
| 1624 |
cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12); |
| 1625 |
cmd_frame->desc_word[1] = cpu_to_le16(SET_RX_FILTER); |
| 1626 |
cmd_frame->desc_word[4] = cpu_to_le16(rx_filter_word); |
| 1627 |
|
| 1628 |
skb_put(skb, FRAME_DESC_SZ); |
| 1629 |
|
| 1630 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1631 |
} |
| 1632 |
|
| 1633 |
int rsi_send_ps_request(struct rsi_hw *adapter, bool enable, |
| 1634 |
struct ieee80211_vif *vif) |
| 1635 |
{ |
| 1636 |
struct rsi_common *common = adapter->priv; |
| 1637 |
struct rsi_request_ps *ps; |
| 1638 |
struct rsi_ps_info *ps_info; |
| 1639 |
struct sk_buff *skb; |
| 1640 |
int frame_len = sizeof(*ps); |
| 1641 |
|
| 1642 |
skb = dev_alloc_skb(frame_len); |
| 1643 |
if (!skb) |
| 1644 |
return -ENOMEM; |
| 1645 |
memset(skb->data, 0, frame_len); |
| 1646 |
|
| 1647 |
ps = (struct rsi_request_ps *)skb->data; |
| 1648 |
ps_info = &adapter->ps_info; |
| 1649 |
|
| 1650 |
rsi_set_len_qno(&ps->desc.desc_dword0.len_qno, |
| 1651 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 1652 |
ps->desc.desc_dword0.frame_type = WAKEUP_SLEEP_REQUEST; |
| 1653 |
if (enable) { |
| 1654 |
ps->ps_sleep.enable = RSI_PS_ENABLE; |
| 1655 |
ps->desc.desc_dword3.token = cpu_to_le16(RSI_SLEEP_REQUEST); |
| 1656 |
} else { |
| 1657 |
ps->ps_sleep.enable = RSI_PS_DISABLE; |
| 1658 |
ps->desc.desc_dword0.len_qno |= cpu_to_le16(RSI_PS_DISABLE_IND); |
| 1659 |
ps->desc.desc_dword3.token = cpu_to_le16(RSI_WAKEUP_REQUEST); |
| 1660 |
} |
| 1661 |
|
| 1662 |
ps->ps_uapsd_acs = common->uapsd_bitmap; |
| 1663 |
|
| 1664 |
ps->ps_sleep.sleep_type = ps_info->sleep_type; |
| 1665 |
ps->ps_sleep.num_bcns_per_lis_int = |
| 1666 |
cpu_to_le16(ps_info->num_bcns_per_lis_int); |
| 1667 |
ps->ps_sleep.sleep_duration = |
| 1668 |
cpu_to_le32(ps_info->deep_sleep_wakeup_period); |
| 1669 |
|
| 1670 |
if (vif->cfg.assoc) |
| 1671 |
ps->ps_sleep.connected_sleep = RSI_CONNECTED_SLEEP; |
| 1672 |
else |
| 1673 |
ps->ps_sleep.connected_sleep = RSI_DEEP_SLEEP; |
| 1674 |
|
| 1675 |
ps->ps_listen_interval = cpu_to_le32(ps_info->listen_interval); |
| 1676 |
ps->ps_dtim_interval_duration = |
| 1677 |
cpu_to_le32(ps_info->dtim_interval_duration); |
| 1678 |
|
| 1679 |
if (ps_info->listen_interval > ps_info->dtim_interval_duration) |
| 1680 |
ps->ps_listen_interval = cpu_to_le32(RSI_PS_DISABLE); |
| 1681 |
|
| 1682 |
ps->ps_num_dtim_intervals = cpu_to_le16(ps_info->num_dtims_per_sleep); |
| 1683 |
skb_put(skb, frame_len); |
| 1684 |
|
| 1685 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1686 |
} |
| 1687 |
|
| 1688 |
static int rsi_send_w9116_features(struct rsi_common *common) |
| 1689 |
{ |
| 1690 |
struct rsi_wlan_9116_features *w9116_features; |
| 1691 |
u16 frame_len = sizeof(struct rsi_wlan_9116_features); |
| 1692 |
struct sk_buff *skb; |
| 1693 |
|
| 1694 |
rsi_dbg(MGMT_TX_ZONE, |
| 1695 |
"%s: Sending wlan 9116 features\n", __func__); |
| 1696 |
|
| 1697 |
skb = dev_alloc_skb(frame_len); |
| 1698 |
if (!skb) |
| 1699 |
return -ENOMEM; |
| 1700 |
memset(skb->data, 0, frame_len); |
| 1701 |
|
| 1702 |
w9116_features = (struct rsi_wlan_9116_features *)skb->data; |
| 1703 |
|
| 1704 |
w9116_features->pll_mode = common->w9116_features.pll_mode; |
| 1705 |
w9116_features->rf_type = common->w9116_features.rf_type; |
| 1706 |
w9116_features->wireless_mode = common->w9116_features.wireless_mode; |
| 1707 |
w9116_features->enable_ppe = common->w9116_features.enable_ppe; |
| 1708 |
w9116_features->afe_type = common->w9116_features.afe_type; |
| 1709 |
if (common->w9116_features.dpd) |
| 1710 |
w9116_features->feature_enable |= cpu_to_le32(RSI_DPD); |
| 1711 |
if (common->w9116_features.sifs_tx_enable) |
| 1712 |
w9116_features->feature_enable |= |
| 1713 |
cpu_to_le32(RSI_SIFS_TX_ENABLE); |
| 1714 |
if (common->w9116_features.ps_options & RSI_DUTY_CYCLING) |
| 1715 |
w9116_features->feature_enable |= cpu_to_le32(RSI_DUTY_CYCLING); |
| 1716 |
if (common->w9116_features.ps_options & RSI_END_OF_FRAME) |
| 1717 |
w9116_features->feature_enable |= cpu_to_le32(RSI_END_OF_FRAME); |
| 1718 |
w9116_features->feature_enable |= |
| 1719 |
cpu_to_le32((common->w9116_features.ps_options & ~0x3) << 2); |
| 1720 |
|
| 1721 |
rsi_set_len_qno(&w9116_features->desc.desc_dword0.len_qno, |
| 1722 |
frame_len - FRAME_DESC_SZ, RSI_WIFI_MGMT_Q); |
| 1723 |
w9116_features->desc.desc_dword0.frame_type = FEATURES_ENABLE; |
| 1724 |
skb_put(skb, frame_len); |
| 1725 |
|
| 1726 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1727 |
} |
| 1728 |
|
| 1729 |
/** |
| 1730 |
* rsi_set_antenna() - This function send antenna configuration request |
| 1731 |
* to device |
| 1732 |
* |
| 1733 |
* @common: Pointer to the driver private structure. |
| 1734 |
* @antenna: bitmap for tx antenna selection |
| 1735 |
* |
| 1736 |
* Return: 0 on Success, negative error code on failure |
| 1737 |
*/ |
| 1738 |
int rsi_set_antenna(struct rsi_common *common, u8 antenna) |
| 1739 |
{ |
| 1740 |
struct rsi_ant_sel_frame *ant_sel_frame; |
| 1741 |
struct sk_buff *skb; |
| 1742 |
|
| 1743 |
skb = dev_alloc_skb(FRAME_DESC_SZ); |
| 1744 |
if (!skb) { |
| 1745 |
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n", |
| 1746 |
__func__); |
| 1747 |
return -ENOMEM; |
| 1748 |
} |
| 1749 |
|
| 1750 |
memset(skb->data, 0, FRAME_DESC_SZ); |
| 1751 |
|
| 1752 |
ant_sel_frame = (struct rsi_ant_sel_frame *)skb->data; |
| 1753 |
ant_sel_frame->desc_dword0.frame_type = ANT_SEL_FRAME; |
| 1754 |
ant_sel_frame->sub_frame_type = ANTENNA_SEL_TYPE; |
| 1755 |
ant_sel_frame->ant_value = cpu_to_le16(antenna & ANTENNA_MASK_VALUE); |
| 1756 |
rsi_set_len_qno(&ant_sel_frame->desc_dword0.len_qno, |
| 1757 |
0, RSI_WIFI_MGMT_Q); |
| 1758 |
skb_put(skb, FRAME_DESC_SZ); |
| 1759 |
|
| 1760 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1761 |
} |
| 1762 |
|
| 1763 |
static int rsi_send_beacon(struct rsi_common *common) |
| 1764 |
{ |
| 1765 |
struct sk_buff *skb = NULL; |
| 1766 |
u8 dword_align_bytes = 0; |
| 1767 |
|
| 1768 |
skb = dev_alloc_skb(MAX_MGMT_PKT_SIZE); |
| 1769 |
if (!skb) |
| 1770 |
return -ENOMEM; |
| 1771 |
|
| 1772 |
memset(skb->data, 0, MAX_MGMT_PKT_SIZE); |
| 1773 |
|
| 1774 |
dword_align_bytes = ((unsigned long)skb->data & 0x3f); |
| 1775 |
if (dword_align_bytes) |
| 1776 |
skb_pull(skb, (64 - dword_align_bytes)); |
| 1777 |
if (rsi_prepare_beacon(common, skb)) { |
| 1778 |
rsi_dbg(ERR_ZONE, "Failed to prepare beacon\n"); |
| 1779 |
dev_kfree_skb(skb); |
| 1780 |
return -EINVAL; |
| 1781 |
} |
| 1782 |
skb_queue_tail(&common->tx_queue[MGMT_BEACON_Q], skb); |
| 1783 |
rsi_set_event(&common->tx_thread.event); |
| 1784 |
rsi_dbg(DATA_TX_ZONE, "%s: Added to beacon queue\n", __func__); |
| 1785 |
|
| 1786 |
return 0; |
| 1787 |
} |
| 1788 |
|
| 1789 |
#ifdef CONFIG_PM |
| 1790 |
int rsi_send_wowlan_request(struct rsi_common *common, u16 flags, |
| 1791 |
u16 sleep_status) |
| 1792 |
{ |
| 1793 |
struct rsi_wowlan_req *cmd_frame; |
| 1794 |
struct sk_buff *skb; |
| 1795 |
u8 length; |
| 1796 |
|
| 1797 |
rsi_dbg(ERR_ZONE, "%s: Sending wowlan request frame\n", __func__); |
| 1798 |
|
| 1799 |
length = sizeof(*cmd_frame); |
| 1800 |
skb = dev_alloc_skb(length); |
| 1801 |
if (!skb) |
| 1802 |
return -ENOMEM; |
| 1803 |
memset(skb->data, 0, length); |
| 1804 |
cmd_frame = (struct rsi_wowlan_req *)skb->data; |
| 1805 |
|
| 1806 |
rsi_set_len_qno(&cmd_frame->desc.desc_dword0.len_qno, |
| 1807 |
(length - FRAME_DESC_SZ), |
| 1808 |
RSI_WIFI_MGMT_Q); |
| 1809 |
cmd_frame->desc.desc_dword0.frame_type = WOWLAN_CONFIG_PARAMS; |
| 1810 |
cmd_frame->host_sleep_status = sleep_status; |
| 1811 |
if (common->secinfo.gtk_cipher) |
| 1812 |
flags |= RSI_WOW_GTK_REKEY; |
| 1813 |
if (sleep_status) |
| 1814 |
cmd_frame->wow_flags = flags; |
| 1815 |
rsi_dbg(INFO_ZONE, "Host_Sleep_Status : %d Flags : %d\n", |
| 1816 |
cmd_frame->host_sleep_status, cmd_frame->wow_flags); |
| 1817 |
|
| 1818 |
skb_put(skb, length); |
| 1819 |
|
| 1820 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1821 |
} |
| 1822 |
#endif |
| 1823 |
|
| 1824 |
int rsi_send_bgscan_params(struct rsi_common *common, int enable) |
| 1825 |
{ |
| 1826 |
struct rsi_bgscan_params *params = &common->bgscan; |
| 1827 |
struct cfg80211_scan_request *scan_req = common->hwscan; |
| 1828 |
struct rsi_bgscan_config *bgscan; |
| 1829 |
struct sk_buff *skb; |
| 1830 |
u16 frame_len = sizeof(*bgscan); |
| 1831 |
u8 i; |
| 1832 |
|
| 1833 |
rsi_dbg(MGMT_TX_ZONE, "%s: Sending bgscan params frame\n", __func__); |
| 1834 |
|
| 1835 |
skb = dev_alloc_skb(frame_len); |
| 1836 |
if (!skb) |
| 1837 |
return -ENOMEM; |
| 1838 |
memset(skb->data, 0, frame_len); |
| 1839 |
|
| 1840 |
bgscan = (struct rsi_bgscan_config *)skb->data; |
| 1841 |
rsi_set_len_qno(&bgscan->desc_dword0.len_qno, |
| 1842 |
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q); |
| 1843 |
bgscan->desc_dword0.frame_type = BG_SCAN_PARAMS; |
| 1844 |
bgscan->bgscan_threshold = cpu_to_le16(params->bgscan_threshold); |
| 1845 |
bgscan->roam_threshold = cpu_to_le16(params->roam_threshold); |
| 1846 |
if (enable) |
| 1847 |
bgscan->bgscan_periodicity = |
| 1848 |
cpu_to_le16(params->bgscan_periodicity); |
| 1849 |
bgscan->active_scan_duration = |
| 1850 |
cpu_to_le16(params->active_scan_duration); |
| 1851 |
bgscan->passive_scan_duration = |
| 1852 |
cpu_to_le16(params->passive_scan_duration); |
| 1853 |
bgscan->two_probe = params->two_probe; |
| 1854 |
|
| 1855 |
bgscan->num_bgscan_channels = scan_req->n_channels; |
| 1856 |
for (i = 0; i < bgscan->num_bgscan_channels; i++) |
| 1857 |
bgscan->channels2scan[i] = |
| 1858 |
cpu_to_le16(scan_req->channels[i]->hw_value); |
| 1859 |
|
| 1860 |
skb_put(skb, frame_len); |
| 1861 |
|
| 1862 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1863 |
} |
| 1864 |
|
| 1865 |
/* This function sends the probe request to be used by firmware in |
| 1866 |
* background scan |
| 1867 |
*/ |
| 1868 |
int rsi_send_bgscan_probe_req(struct rsi_common *common, |
| 1869 |
struct ieee80211_vif *vif) |
| 1870 |
{ |
| 1871 |
struct cfg80211_scan_request *scan_req = common->hwscan; |
| 1872 |
struct rsi_bgscan_probe *bgscan; |
| 1873 |
struct sk_buff *skb; |
| 1874 |
struct sk_buff *probereq_skb; |
| 1875 |
u16 frame_len = sizeof(*bgscan); |
| 1876 |
size_t ssid_len = 0; |
| 1877 |
u8 *ssid = NULL; |
| 1878 |
|
| 1879 |
rsi_dbg(MGMT_TX_ZONE, |
| 1880 |
"%s: Sending bgscan probe req frame\n", __func__); |
| 1881 |
|
| 1882 |
if (common->priv->sc_nvifs <= 0) |
| 1883 |
return -ENODEV; |
| 1884 |
|
| 1885 |
if (scan_req->n_ssids) { |
| 1886 |
ssid = scan_req->ssids[0].ssid; |
| 1887 |
ssid_len = scan_req->ssids[0].ssid_len; |
| 1888 |
} |
| 1889 |
|
| 1890 |
skb = dev_alloc_skb(frame_len + MAX_BGSCAN_PROBE_REQ_LEN); |
| 1891 |
if (!skb) |
| 1892 |
return -ENOMEM; |
| 1893 |
memset(skb->data, 0, frame_len + MAX_BGSCAN_PROBE_REQ_LEN); |
| 1894 |
|
| 1895 |
bgscan = (struct rsi_bgscan_probe *)skb->data; |
| 1896 |
bgscan->desc_dword0.frame_type = BG_SCAN_PROBE_REQ; |
| 1897 |
bgscan->flags = cpu_to_le16(HOST_BG_SCAN_TRIG); |
| 1898 |
if (common->band == NL80211_BAND_5GHZ) { |
| 1899 |
bgscan->mgmt_rate = cpu_to_le16(RSI_RATE_6); |
| 1900 |
bgscan->def_chan = cpu_to_le16(40); |
| 1901 |
} else { |
| 1902 |
bgscan->mgmt_rate = cpu_to_le16(RSI_RATE_1); |
| 1903 |
bgscan->def_chan = cpu_to_le16(11); |
| 1904 |
} |
| 1905 |
bgscan->channel_scan_time = cpu_to_le16(RSI_CHANNEL_SCAN_TIME); |
| 1906 |
|
| 1907 |
probereq_skb = ieee80211_probereq_get(common->priv->hw, vif->addr, ssid, |
| 1908 |
ssid_len, scan_req->ie_len); |
| 1909 |
if (!probereq_skb) { |
| 1910 |
dev_kfree_skb(skb); |
| 1911 |
return -ENOMEM; |
| 1912 |
} |
| 1913 |
|
| 1914 |
memcpy(&skb->data[frame_len], probereq_skb->data, probereq_skb->len); |
| 1915 |
|
| 1916 |
bgscan->probe_req_length = cpu_to_le16(probereq_skb->len); |
| 1917 |
|
| 1918 |
rsi_set_len_qno(&bgscan->desc_dword0.len_qno, |
| 1919 |
(frame_len - FRAME_DESC_SZ + probereq_skb->len), |
| 1920 |
RSI_WIFI_MGMT_Q); |
| 1921 |
|
| 1922 |
skb_put(skb, frame_len + probereq_skb->len); |
| 1923 |
|
| 1924 |
dev_kfree_skb(probereq_skb); |
| 1925 |
|
| 1926 |
return rsi_send_internal_mgmt_frame(common, skb); |
| 1927 |
} |
| 1928 |
|
| 1929 |
/** |
| 1930 |
* rsi_handle_ta_confirm_type() - This function handles the confirm frames. |
| 1931 |
* @common: Pointer to the driver private structure. |
| 1932 |
* @msg: Pointer to received packet. |
| 1933 |
* |
| 1934 |
* Return: 0 on success, -1 on failure. |
| 1935 |
*/ |
| 1936 |
static int rsi_handle_ta_confirm_type(struct rsi_common *common, |
| 1937 |
u8 *msg) |
| 1938 |
{ |
| 1939 |
struct rsi_hw *adapter = common->priv; |
| 1940 |
u8 sub_type = (msg[15] & 0xff); |
| 1941 |
u16 msg_len = ((u16 *)msg)[0] & 0xfff; |
| 1942 |
u8 offset; |
| 1943 |
|
| 1944 |
switch (sub_type) { |
| 1945 |
case BOOTUP_PARAMS_REQUEST: |
| 1946 |
rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n", |
| 1947 |
__func__); |
| 1948 |
if (common->fsm_state == FSM_BOOT_PARAMS_SENT) { |
| 1949 |
if (adapter->device_model == RSI_DEV_9116) { |
| 1950 |
common->band = NL80211_BAND_5GHZ; |
| 1951 |
common->num_supp_bands = 2; |
| 1952 |
|
| 1953 |
if (rsi_send_reset_mac(common)) |
| 1954 |
goto out; |
| 1955 |
else |
| 1956 |
common->fsm_state = FSM_RESET_MAC_SENT; |
| 1957 |
} else { |
| 1958 |
adapter->eeprom.length = |
| 1959 |
(IEEE80211_ADDR_LEN + |
| 1960 |
WLAN_MAC_MAGIC_WORD_LEN + |
| 1961 |
WLAN_HOST_MODE_LEN); |
| 1962 |
adapter->eeprom.offset = WLAN_MAC_EEPROM_ADDR; |
| 1963 |
if (rsi_eeprom_read(common)) { |
| 1964 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 1965 |
goto out; |
| 1966 |
} |
| 1967 |
common->fsm_state = FSM_EEPROM_READ_MAC_ADDR; |
| 1968 |
} |
| 1969 |
} else { |
| 1970 |
rsi_dbg(INFO_ZONE, |
| 1971 |
"%s: Received bootup params cfm in %d state\n", |
| 1972 |
__func__, common->fsm_state); |
| 1973 |
return 0; |
| 1974 |
} |
| 1975 |
break; |
| 1976 |
|
| 1977 |
case EEPROM_READ: |
| 1978 |
rsi_dbg(FSM_ZONE, "EEPROM READ confirm received\n"); |
| 1979 |
if (msg_len <= 0) { |
| 1980 |
rsi_dbg(FSM_ZONE, |
| 1981 |
"%s: [EEPROM_READ] Invalid len %d\n", |
| 1982 |
__func__, msg_len); |
| 1983 |
goto out; |
| 1984 |
} |
| 1985 |
if (msg[16] != MAGIC_WORD) { |
| 1986 |
rsi_dbg(FSM_ZONE, |
| 1987 |
"%s: [EEPROM_READ] Invalid token\n", __func__); |
| 1988 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 1989 |
goto out; |
| 1990 |
} |
| 1991 |
if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) { |
| 1992 |
offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN + |
| 1993 |
WLAN_MAC_MAGIC_WORD_LEN); |
| 1994 |
memcpy(common->mac_addr, &msg[offset], ETH_ALEN); |
| 1995 |
adapter->eeprom.length = |
| 1996 |
((WLAN_MAC_MAGIC_WORD_LEN + 3) & (~3)); |
| 1997 |
adapter->eeprom.offset = WLAN_EEPROM_RFTYPE_ADDR; |
| 1998 |
if (rsi_eeprom_read(common)) { |
| 1999 |
rsi_dbg(ERR_ZONE, |
| 2000 |
"%s: Failed reading RF band\n", |
| 2001 |
__func__); |
| 2002 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 2003 |
goto out; |
| 2004 |
} |
| 2005 |
common->fsm_state = FSM_EEPROM_READ_RF_TYPE; |
| 2006 |
} else if (common->fsm_state == FSM_EEPROM_READ_RF_TYPE) { |
| 2007 |
if ((msg[17] & 0x3) == 0x3) { |
| 2008 |
rsi_dbg(INIT_ZONE, "Dual band supported\n"); |
| 2009 |
common->band = NL80211_BAND_5GHZ; |
| 2010 |
common->num_supp_bands = 2; |
| 2011 |
} else if ((msg[17] & 0x3) == 0x1) { |
| 2012 |
rsi_dbg(INIT_ZONE, |
| 2013 |
"Only 2.4Ghz band supported\n"); |
| 2014 |
common->band = NL80211_BAND_2GHZ; |
| 2015 |
common->num_supp_bands = 1; |
| 2016 |
} |
| 2017 |
if (rsi_send_reset_mac(common)) |
| 2018 |
goto out; |
| 2019 |
common->fsm_state = FSM_RESET_MAC_SENT; |
| 2020 |
} else { |
| 2021 |
rsi_dbg(ERR_ZONE, "%s: Invalid EEPROM read type\n", |
| 2022 |
__func__); |
| 2023 |
return 0; |
| 2024 |
} |
| 2025 |
break; |
| 2026 |
|
| 2027 |
case RESET_MAC_REQ: |
| 2028 |
if (common->fsm_state == FSM_RESET_MAC_SENT) { |
| 2029 |
rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n", |
| 2030 |
__func__); |
| 2031 |
|
| 2032 |
if (rsi_load_radio_caps(common)) |
| 2033 |
goto out; |
| 2034 |
else |
| 2035 |
common->fsm_state = FSM_RADIO_CAPS_SENT; |
| 2036 |
} else { |
| 2037 |
rsi_dbg(ERR_ZONE, |
| 2038 |
"%s: Received reset mac cfm in %d state\n", |
| 2039 |
__func__, common->fsm_state); |
| 2040 |
return 0; |
| 2041 |
} |
| 2042 |
break; |
| 2043 |
|
| 2044 |
case RADIO_CAPABILITIES: |
| 2045 |
if (common->fsm_state == FSM_RADIO_CAPS_SENT) { |
| 2046 |
common->rf_reset = 1; |
| 2047 |
if (adapter->device_model == RSI_DEV_9116 && |
| 2048 |
rsi_send_w9116_features(common)) { |
| 2049 |
rsi_dbg(ERR_ZONE, |
| 2050 |
"Failed to send 9116 features\n"); |
| 2051 |
goto out; |
| 2052 |
} |
| 2053 |
if (rsi_program_bb_rf(common)) { |
| 2054 |
goto out; |
| 2055 |
} else { |
| 2056 |
common->fsm_state = FSM_BB_RF_PROG_SENT; |
| 2057 |
rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n", |
| 2058 |
__func__); |
| 2059 |
} |
| 2060 |
} else { |
| 2061 |
rsi_dbg(INFO_ZONE, |
| 2062 |
"%s: Received radio caps cfm in %d state\n", |
| 2063 |
__func__, common->fsm_state); |
| 2064 |
return 0; |
| 2065 |
} |
| 2066 |
break; |
| 2067 |
|
| 2068 |
case BB_PROG_VALUES_REQUEST: |
| 2069 |
case RF_PROG_VALUES_REQUEST: |
| 2070 |
case BBP_PROG_IN_TA: |
| 2071 |
rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__); |
| 2072 |
if (common->fsm_state == FSM_BB_RF_PROG_SENT) { |
| 2073 |
common->bb_rf_prog_count--; |
| 2074 |
if (!common->bb_rf_prog_count) { |
| 2075 |
common->fsm_state = FSM_MAC_INIT_DONE; |
| 2076 |
if (common->reinit_hw) { |
| 2077 |
complete(&common->wlan_init_completion); |
| 2078 |
} else { |
| 2079 |
if (common->bt_defer_attach) |
| 2080 |
rsi_attach_bt(common); |
| 2081 |
|
| 2082 |
return rsi_mac80211_attach(common); |
| 2083 |
} |
| 2084 |
} |
| 2085 |
} else { |
| 2086 |
rsi_dbg(INFO_ZONE, |
| 2087 |
"%s: Received bbb_rf cfm in %d state\n", |
| 2088 |
__func__, common->fsm_state); |
| 2089 |
return 0; |
| 2090 |
} |
| 2091 |
break; |
| 2092 |
|
| 2093 |
case SCAN_REQUEST: |
| 2094 |
rsi_dbg(INFO_ZONE, "Set channel confirm\n"); |
| 2095 |
break; |
| 2096 |
|
| 2097 |
case WAKEUP_SLEEP_REQUEST: |
| 2098 |
rsi_dbg(INFO_ZONE, "Wakeup/Sleep confirmation.\n"); |
| 2099 |
return rsi_handle_ps_confirm(adapter, msg); |
| 2100 |
|
| 2101 |
case BG_SCAN_PROBE_REQ: |
| 2102 |
rsi_dbg(INFO_ZONE, "BG scan complete event\n"); |
| 2103 |
if (common->bgscan_en) { |
| 2104 |
struct cfg80211_scan_info info; |
| 2105 |
|
| 2106 |
if (!rsi_send_bgscan_params(common, RSI_STOP_BGSCAN)) |
| 2107 |
common->bgscan_en = 0; |
| 2108 |
info.aborted = false; |
| 2109 |
ieee80211_scan_completed(adapter->hw, &info); |
| 2110 |
} |
| 2111 |
rsi_dbg(INFO_ZONE, "Background scan completed\n"); |
| 2112 |
break; |
| 2113 |
|
| 2114 |
default: |
| 2115 |
rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n", |
| 2116 |
__func__); |
| 2117 |
break; |
| 2118 |
} |
| 2119 |
return 0; |
| 2120 |
out: |
| 2121 |
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n", |
| 2122 |
__func__); |
| 2123 |
return -EINVAL; |
| 2124 |
} |
| 2125 |
|
| 2126 |
int rsi_handle_card_ready(struct rsi_common *common, u8 *msg) |
| 2127 |
{ |
| 2128 |
int status; |
| 2129 |
|
| 2130 |
switch (common->fsm_state) { |
| 2131 |
case FSM_CARD_NOT_READY: |
| 2132 |
rsi_dbg(INIT_ZONE, "Card ready indication from Common HAL\n"); |
| 2133 |
rsi_set_default_parameters(common); |
| 2134 |
if (rsi_send_common_dev_params(common) < 0) |
| 2135 |
return -EINVAL; |
| 2136 |
common->fsm_state = FSM_COMMON_DEV_PARAMS_SENT; |
| 2137 |
break; |
| 2138 |
case FSM_COMMON_DEV_PARAMS_SENT: |
| 2139 |
rsi_dbg(INIT_ZONE, "Card ready indication from WLAN HAL\n"); |
| 2140 |
|
| 2141 |
if (common->priv->device_model == RSI_DEV_9116) { |
| 2142 |
if (msg[16] != MAGIC_WORD) { |
| 2143 |
rsi_dbg(FSM_ZONE, |
| 2144 |
"%s: [EEPROM_READ] Invalid token\n", |
| 2145 |
__func__); |
| 2146 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 2147 |
return -EINVAL; |
| 2148 |
} |
| 2149 |
memcpy(common->mac_addr, &msg[20], ETH_ALEN); |
| 2150 |
rsi_dbg(INIT_ZONE, "MAC Addr %pM", common->mac_addr); |
| 2151 |
} |
| 2152 |
/* Get usb buffer status register address */ |
| 2153 |
common->priv->usb_buffer_status_reg = *(u32 *)&msg[8]; |
| 2154 |
rsi_dbg(INFO_ZONE, "USB buffer status register = %x\n", |
| 2155 |
common->priv->usb_buffer_status_reg); |
| 2156 |
|
| 2157 |
if (common->priv->device_model == RSI_DEV_9116) |
| 2158 |
status = rsi_load_9116_bootup_params(common); |
| 2159 |
else |
| 2160 |
status = rsi_load_bootup_params(common); |
| 2161 |
if (status < 0) { |
| 2162 |
common->fsm_state = FSM_CARD_NOT_READY; |
| 2163 |
return status; |
| 2164 |
} |
| 2165 |
common->fsm_state = FSM_BOOT_PARAMS_SENT; |
| 2166 |
break; |
| 2167 |
default: |
| 2168 |
rsi_dbg(ERR_ZONE, |
| 2169 |
"%s: card ready indication in invalid state %d.\n", |
| 2170 |
__func__, common->fsm_state); |
| 2171 |
return -EINVAL; |
| 2172 |
} |
| 2173 |
|
| 2174 |
return 0; |
| 2175 |
} |
| 2176 |
|
| 2177 |
/** |
| 2178 |
* rsi_mgmt_pkt_recv() - This function processes the management packets |
| 2179 |
* received from the hardware. |
| 2180 |
* @common: Pointer to the driver private structure. |
| 2181 |
* @msg: Pointer to the received packet. |
| 2182 |
* |
| 2183 |
* Return: 0 on success, -1 on failure. |
| 2184 |
*/ |
| 2185 |
int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg) |
| 2186 |
{ |
| 2187 |
s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff); |
| 2188 |
u16 msg_type = (msg[2]); |
| 2189 |
|
| 2190 |
rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n", |
| 2191 |
__func__, msg_len, msg_type); |
| 2192 |
|
| 2193 |
switch (msg_type) { |
| 2194 |
case TA_CONFIRM_TYPE: |
| 2195 |
return rsi_handle_ta_confirm_type(common, msg); |
| 2196 |
case CARD_READY_IND: |
| 2197 |
common->hibernate_resume = false; |
| 2198 |
rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n", |
| 2199 |
__func__); |
| 2200 |
return rsi_handle_card_ready(common, msg); |
| 2201 |
case TX_STATUS_IND: |
| 2202 |
switch (msg[RSI_TX_STATUS_TYPE]) { |
| 2203 |
case PROBEREQ_CONFIRM: |
| 2204 |
common->mgmt_q_block = false; |
| 2205 |
rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n", |
| 2206 |
__func__); |
| 2207 |
break; |
| 2208 |
case EAPOL4_CONFIRM: |
| 2209 |
if (msg[RSI_TX_STATUS]) { |
| 2210 |
common->eapol4_confirm = true; |
| 2211 |
if (!rsi_send_block_unblock_frame(common, |
| 2212 |
false)) |
| 2213 |
common->hw_data_qs_blocked = false; |
| 2214 |
} |
| 2215 |
} |
| 2216 |
break; |
| 2217 |
case BEACON_EVENT_IND: |
| 2218 |
rsi_dbg(INFO_ZONE, "Beacon event\n"); |
| 2219 |
if (common->fsm_state != FSM_MAC_INIT_DONE) |
| 2220 |
return -1; |
| 2221 |
if (common->iface_down) |
| 2222 |
return -1; |
| 2223 |
if (!common->beacon_enabled) |
| 2224 |
return -1; |
| 2225 |
rsi_send_beacon(common); |
| 2226 |
break; |
| 2227 |
case WOWLAN_WAKEUP_REASON: |
| 2228 |
rsi_dbg(ERR_ZONE, "\n\nWakeup Type: %x\n", msg[15]); |
| 2229 |
switch (msg[15]) { |
| 2230 |
case RSI_UNICAST_MAGIC_PKT: |
| 2231 |
rsi_dbg(ERR_ZONE, |
| 2232 |
"*** Wakeup for Unicast magic packet ***\n"); |
| 2233 |
break; |
| 2234 |
case RSI_BROADCAST_MAGICPKT: |
| 2235 |
rsi_dbg(ERR_ZONE, |
| 2236 |
"*** Wakeup for Broadcast magic packet ***\n"); |
| 2237 |
break; |
| 2238 |
case RSI_EAPOL_PKT: |
| 2239 |
rsi_dbg(ERR_ZONE, |
| 2240 |
"*** Wakeup for GTK renewal ***\n"); |
| 2241 |
break; |
| 2242 |
case RSI_DISCONNECT_PKT: |
| 2243 |
rsi_dbg(ERR_ZONE, |
| 2244 |
"*** Wakeup for Disconnect ***\n"); |
| 2245 |
break; |
| 2246 |
case RSI_HW_BMISS_PKT: |
| 2247 |
rsi_dbg(ERR_ZONE, |
| 2248 |
"*** Wakeup for HW Beacon miss ***\n"); |
| 2249 |
break; |
| 2250 |
default: |
| 2251 |
rsi_dbg(ERR_ZONE, |
| 2252 |
"##### Un-intentional Wakeup #####\n"); |
| 2253 |
break; |
| 2254 |
} |
| 2255 |
break; |
| 2256 |
case RX_DOT11_MGMT: |
| 2257 |
return rsi_mgmt_pkt_to_core(common, msg, msg_len); |
| 2258 |
default: |
| 2259 |
rsi_dbg(INFO_ZONE, "Received packet type: 0x%x\n", msg_type); |
| 2260 |
} |
| 2261 |
return 0; |
| 2262 |
} |