| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef RTL8180_H |
| 3 |
#define RTL8180_H |
| 4 |
|
| 5 |
#include "rtl818x.h" |
| 6 |
|
| 7 |
#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD |
| 8 |
|
| 9 |
#define RF_PARAM_ANALOGPHY (1 << 0) |
| 10 |
#define RF_PARAM_ANTBDEFAULT (1 << 1) |
| 11 |
#define RF_PARAM_CARRIERSENSE1 (1 << 2) |
| 12 |
#define RF_PARAM_CARRIERSENSE2 (1 << 3) |
| 13 |
|
| 14 |
#define BB_ANTATTEN_CHAN14 0x0C |
| 15 |
#define BB_ANTENNA_B 0x40 |
| 16 |
|
| 17 |
#define BB_HOST_BANG (1 << 30) |
| 18 |
#define BB_HOST_BANG_EN (1 << 2) |
| 19 |
#define BB_HOST_BANG_CLK (1 << 1) |
| 20 |
#define BB_HOST_BANG_DATA 1 |
| 21 |
|
| 22 |
#define ANAPARAM_TXDACOFF_SHIFT 27 |
| 23 |
#define ANAPARAM_PWR0_SHIFT 28 |
| 24 |
#define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT) |
| 25 |
#define ANAPARAM_PWR1_SHIFT 20 |
| 26 |
#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) |
| 27 |
|
| 28 |
/* rtl8180/rtl8185 have 3 queue + beacon queue. |
| 29 |
* mac80211 can use just one, + beacon = 2 tot. |
| 30 |
*/ |
| 31 |
#define RTL8180_NR_TX_QUEUES 2 |
| 32 |
|
| 33 |
/* rtl8187SE have 6 queues + beacon queues |
| 34 |
* mac80211 can use 4 QoS data queue, + beacon = 5 tot |
| 35 |
*/ |
| 36 |
#define RTL8187SE_NR_TX_QUEUES 5 |
| 37 |
|
| 38 |
/* for array static allocation, it is the max of above */ |
| 39 |
#define RTL818X_NR_TX_QUEUES 5 |
| 40 |
|
| 41 |
struct rtl8180_tx_desc { |
| 42 |
__le32 flags; |
| 43 |
__le16 rts_duration; |
| 44 |
__le16 plcp_len; |
| 45 |
__le32 tx_buf; |
| 46 |
union{ |
| 47 |
__le32 frame_len; |
| 48 |
struct { |
| 49 |
__le16 frame_len_se; |
| 50 |
__le16 frame_duration; |
| 51 |
} __packed; |
| 52 |
} __packed; |
| 53 |
__le32 next_tx_desc; |
| 54 |
u8 cw; |
| 55 |
u8 retry_limit; |
| 56 |
u8 agc; |
| 57 |
u8 flags2; |
| 58 |
/* rsvd for 8180/8185. |
| 59 |
* valid for 8187se but we dont use it |
| 60 |
*/ |
| 61 |
u32 reserved; |
| 62 |
/* all rsvd for 8180/8185 */ |
| 63 |
__le16 flags3; |
| 64 |
__le16 frag_qsize; |
| 65 |
} __packed; |
| 66 |
|
| 67 |
struct rtl818x_rx_cmd_desc { |
| 68 |
__le32 flags; |
| 69 |
u32 reserved; |
| 70 |
__le32 rx_buf; |
| 71 |
} __packed; |
| 72 |
|
| 73 |
struct rtl8180_rx_desc { |
| 74 |
__le32 flags; |
| 75 |
__le32 flags2; |
| 76 |
__le64 tsft; |
| 77 |
|
| 78 |
} __packed; |
| 79 |
|
| 80 |
struct rtl8187se_rx_desc { |
| 81 |
__le32 flags; |
| 82 |
__le64 tsft; |
| 83 |
__le32 flags2; |
| 84 |
__le32 flags3; |
| 85 |
u32 reserved[3]; |
| 86 |
} __packed; |
| 87 |
|
| 88 |
struct rtl8180_tx_ring { |
| 89 |
struct rtl8180_tx_desc *desc; |
| 90 |
dma_addr_t dma; |
| 91 |
unsigned int idx; |
| 92 |
unsigned int entries; |
| 93 |
struct sk_buff_head queue; |
| 94 |
}; |
| 95 |
|
| 96 |
struct rtl8180_vif { |
| 97 |
struct ieee80211_hw *dev; |
| 98 |
|
| 99 |
/* beaconing */ |
| 100 |
struct delayed_work beacon_work; |
| 101 |
bool enable_beacon; |
| 102 |
}; |
| 103 |
|
| 104 |
struct rtl8180_priv { |
| 105 |
/* common between rtl818x drivers */ |
| 106 |
struct rtl818x_csr __iomem *map; |
| 107 |
const struct rtl818x_rf_ops *rf; |
| 108 |
struct ieee80211_vif *vif; |
| 109 |
|
| 110 |
/* rtl8180 driver specific */ |
| 111 |
bool map_pio; |
| 112 |
spinlock_t lock; |
| 113 |
void *rx_ring; |
| 114 |
u8 rx_ring_sz; |
| 115 |
dma_addr_t rx_ring_dma; |
| 116 |
unsigned int rx_idx; |
| 117 |
struct sk_buff *rx_buf[32]; |
| 118 |
struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES]; |
| 119 |
struct ieee80211_channel channels[14]; |
| 120 |
struct ieee80211_rate rates[12]; |
| 121 |
struct ieee80211_supported_band band; |
| 122 |
struct ieee80211_tx_queue_params queue_param[4]; |
| 123 |
struct pci_dev *pdev; |
| 124 |
u32 rx_conf; |
| 125 |
u8 slot_time; |
| 126 |
u16 ack_time; |
| 127 |
|
| 128 |
enum { |
| 129 |
RTL818X_CHIP_FAMILY_RTL8180, |
| 130 |
RTL818X_CHIP_FAMILY_RTL8185, |
| 131 |
RTL818X_CHIP_FAMILY_RTL8187SE, |
| 132 |
} chip_family; |
| 133 |
u32 anaparam; |
| 134 |
u16 rfparam; |
| 135 |
u8 csthreshold; |
| 136 |
u8 mac_addr[ETH_ALEN]; |
| 137 |
u8 rf_type; |
| 138 |
u8 xtal_out; |
| 139 |
u8 xtal_in; |
| 140 |
u8 xtal_cal; |
| 141 |
u8 thermal_meter_val; |
| 142 |
u8 thermal_meter_en; |
| 143 |
u8 antenna_diversity_en; |
| 144 |
u8 antenna_diversity_default; |
| 145 |
/* sequence # */ |
| 146 |
u16 seqno; |
| 147 |
}; |
| 148 |
|
| 149 |
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); |
| 150 |
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam); |
| 151 |
void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2); |
| 152 |
|
| 153 |
static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, const u8 __iomem *addr) |
| 154 |
{ |
| 155 |
return ioread8(addr); |
| 156 |
} |
| 157 |
|
| 158 |
static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, const __le16 __iomem *addr) |
| 159 |
{ |
| 160 |
return ioread16(addr); |
| 161 |
} |
| 162 |
|
| 163 |
static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, const __le32 __iomem *addr) |
| 164 |
{ |
| 165 |
return ioread32(addr); |
| 166 |
} |
| 167 |
|
| 168 |
static inline void rtl818x_iowrite8(struct rtl8180_priv *priv, |
| 169 |
u8 __iomem *addr, u8 val) |
| 170 |
{ |
| 171 |
iowrite8(val, addr); |
| 172 |
} |
| 173 |
|
| 174 |
static inline void rtl818x_iowrite16(struct rtl8180_priv *priv, |
| 175 |
__le16 __iomem *addr, u16 val) |
| 176 |
{ |
| 177 |
iowrite16(val, addr); |
| 178 |
} |
| 179 |
|
| 180 |
static inline void rtl818x_iowrite32(struct rtl8180_priv *priv, |
| 181 |
__le32 __iomem *addr, u32 val) |
| 182 |
{ |
| 183 |
iowrite32(val, addr); |
| 184 |
} |
| 185 |
|
| 186 |
#endif /* RTL8180_H */ |