| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/* |
| 4 |
* Radio tuning for GCT GRF5101 on RTL8180 |
| 5 |
* |
| 6 |
* Copyright 2007 Andrea Merello <[email protected]> |
| 7 |
* |
| 8 |
* Code from the BSD driver and the rtl8181 project have been |
| 9 |
* very useful to understand certain things |
| 10 |
* |
| 11 |
* I want to thanks the Authors of such projects and the Ndiswrapper |
| 12 |
* project Authors. |
| 13 |
* |
| 14 |
* A special Big Thanks also is for all people who donated me cards, |
| 15 |
* making possible the creation of the original rtl8180 driver |
| 16 |
* from which this code is derived! |
| 17 |
*/ |
| 18 |
|
| 19 |
#include <linux/pci.h> |
| 20 |
#include <linux/delay.h> |
| 21 |
#include <net/mac80211.h> |
| 22 |
|
| 23 |
#include "rtl8180.h" |
| 24 |
#include "grf5101.h" |
| 25 |
|
| 26 |
static const int grf5101_encode[] = { |
| 27 |
0x0, 0x8, 0x4, 0xC, |
| 28 |
0x2, 0xA, 0x6, 0xE, |
| 29 |
0x1, 0x9, 0x5, 0xD, |
| 30 |
0x3, 0xB, 0x7, 0xF |
| 31 |
}; |
| 32 |
|
| 33 |
static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data) |
| 34 |
{ |
| 35 |
struct rtl8180_priv *priv = dev->priv; |
| 36 |
u32 phy_config; |
| 37 |
|
| 38 |
phy_config = grf5101_encode[(data >> 8) & 0xF]; |
| 39 |
phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4; |
| 40 |
phy_config |= grf5101_encode[data & 0xF] << 8; |
| 41 |
phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12; |
| 42 |
phy_config |= (addr & 1) << 16; |
| 43 |
phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24; |
| 44 |
|
| 45 |
/* MAC will bang bits to the chip */ |
| 46 |
phy_config |= 0x90000000; |
| 47 |
|
| 48 |
rtl818x_iowrite32(priv, |
| 49 |
(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); |
| 50 |
|
| 51 |
msleep(3); |
| 52 |
} |
| 53 |
|
| 54 |
static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan) |
| 55 |
{ |
| 56 |
struct rtl8180_priv *priv = dev->priv; |
| 57 |
u8 ant = GRF5101_ANTENNA; |
| 58 |
|
| 59 |
if (priv->rfparam & RF_PARAM_ANTBDEFAULT) |
| 60 |
ant |= BB_ANTENNA_B; |
| 61 |
|
| 62 |
if (chan == 14) |
| 63 |
ant |= BB_ANTATTEN_CHAN14; |
| 64 |
|
| 65 |
rtl8180_write_phy(dev, 0x10, ant); |
| 66 |
} |
| 67 |
|
| 68 |
static u8 grf5101_rf_calc_rssi(u8 agc, u8 sq) |
| 69 |
{ |
| 70 |
if (agc > 60) |
| 71 |
return 65; |
| 72 |
|
| 73 |
/* TODO(?): just return agc (or agc + 5) to avoid mult / div */ |
| 74 |
return 65 * agc / 60; |
| 75 |
} |
| 76 |
|
| 77 |
static void grf5101_rf_set_channel(struct ieee80211_hw *dev, |
| 78 |
struct ieee80211_conf *conf) |
| 79 |
{ |
| 80 |
struct rtl8180_priv *priv = dev->priv; |
| 81 |
int channel = |
| 82 |
ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); |
| 83 |
u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; |
| 84 |
u32 chan = channel - 1; |
| 85 |
|
| 86 |
/* set TX power */ |
| 87 |
write_grf5101(dev, 0x15, 0x0); |
| 88 |
write_grf5101(dev, 0x06, txpw); |
| 89 |
write_grf5101(dev, 0x15, 0x10); |
| 90 |
write_grf5101(dev, 0x15, 0x0); |
| 91 |
|
| 92 |
/* set frequency */ |
| 93 |
write_grf5101(dev, 0x07, 0x0); |
| 94 |
write_grf5101(dev, 0x0B, chan); |
| 95 |
write_grf5101(dev, 0x07, 0x1000); |
| 96 |
|
| 97 |
grf5101_write_phy_antenna(dev, channel); |
| 98 |
} |
| 99 |
|
| 100 |
static void grf5101_rf_stop(struct ieee80211_hw *dev) |
| 101 |
{ |
| 102 |
struct rtl8180_priv *priv = dev->priv; |
| 103 |
u32 anaparam; |
| 104 |
|
| 105 |
anaparam = priv->anaparam; |
| 106 |
anaparam &= 0x000fffff; |
| 107 |
anaparam |= 0x3f900000; |
| 108 |
rtl8180_set_anaparam(priv, anaparam); |
| 109 |
|
| 110 |
write_grf5101(dev, 0x07, 0x0); |
| 111 |
write_grf5101(dev, 0x1f, 0x45); |
| 112 |
write_grf5101(dev, 0x1f, 0x5); |
| 113 |
write_grf5101(dev, 0x00, 0x8e4); |
| 114 |
} |
| 115 |
|
| 116 |
static void grf5101_rf_init(struct ieee80211_hw *dev) |
| 117 |
{ |
| 118 |
struct rtl8180_priv *priv = dev->priv; |
| 119 |
|
| 120 |
rtl8180_set_anaparam(priv, priv->anaparam); |
| 121 |
|
| 122 |
write_grf5101(dev, 0x1f, 0x0); |
| 123 |
write_grf5101(dev, 0x1f, 0x0); |
| 124 |
write_grf5101(dev, 0x1f, 0x40); |
| 125 |
write_grf5101(dev, 0x1f, 0x60); |
| 126 |
write_grf5101(dev, 0x1f, 0x61); |
| 127 |
write_grf5101(dev, 0x1f, 0x61); |
| 128 |
write_grf5101(dev, 0x00, 0xae4); |
| 129 |
write_grf5101(dev, 0x1f, 0x1); |
| 130 |
write_grf5101(dev, 0x1f, 0x41); |
| 131 |
write_grf5101(dev, 0x1f, 0x61); |
| 132 |
|
| 133 |
write_grf5101(dev, 0x01, 0x1a23); |
| 134 |
write_grf5101(dev, 0x02, 0x4971); |
| 135 |
write_grf5101(dev, 0x03, 0x41de); |
| 136 |
write_grf5101(dev, 0x04, 0x2d80); |
| 137 |
write_grf5101(dev, 0x05, 0x68ff); /* 0x61ff original value */ |
| 138 |
write_grf5101(dev, 0x06, 0x0); |
| 139 |
write_grf5101(dev, 0x07, 0x0); |
| 140 |
write_grf5101(dev, 0x08, 0x7533); |
| 141 |
write_grf5101(dev, 0x09, 0xc401); |
| 142 |
write_grf5101(dev, 0x0a, 0x0); |
| 143 |
write_grf5101(dev, 0x0c, 0x1c7); |
| 144 |
write_grf5101(dev, 0x0d, 0x29d3); |
| 145 |
write_grf5101(dev, 0x0e, 0x2e8); |
| 146 |
write_grf5101(dev, 0x10, 0x192); |
| 147 |
write_grf5101(dev, 0x11, 0x248); |
| 148 |
write_grf5101(dev, 0x12, 0x0); |
| 149 |
write_grf5101(dev, 0x13, 0x20c4); |
| 150 |
write_grf5101(dev, 0x14, 0xf4fc); |
| 151 |
write_grf5101(dev, 0x15, 0x0); |
| 152 |
write_grf5101(dev, 0x16, 0x1500); |
| 153 |
|
| 154 |
write_grf5101(dev, 0x07, 0x1000); |
| 155 |
|
| 156 |
/* baseband configuration */ |
| 157 |
rtl8180_write_phy(dev, 0, 0xa8); |
| 158 |
rtl8180_write_phy(dev, 3, 0x0); |
| 159 |
rtl8180_write_phy(dev, 4, 0xc0); |
| 160 |
rtl8180_write_phy(dev, 5, 0x90); |
| 161 |
rtl8180_write_phy(dev, 6, 0x1e); |
| 162 |
rtl8180_write_phy(dev, 7, 0x64); |
| 163 |
|
| 164 |
grf5101_write_phy_antenna(dev, 1); |
| 165 |
|
| 166 |
rtl8180_write_phy(dev, 0x11, 0x88); |
| 167 |
|
| 168 |
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & |
| 169 |
RTL818X_CONFIG2_ANTENNA_DIV) |
| 170 |
rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */ |
| 171 |
else |
| 172 |
rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */ |
| 173 |
|
| 174 |
rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold); |
| 175 |
|
| 176 |
rtl8180_write_phy(dev, 0x19, 0x0); |
| 177 |
rtl8180_write_phy(dev, 0x1a, 0xa0); |
| 178 |
rtl8180_write_phy(dev, 0x1b, 0x44); |
| 179 |
} |
| 180 |
|
| 181 |
const struct rtl818x_rf_ops grf5101_rf_ops = { |
| 182 |
.name = "GCT", |
| 183 |
.init = grf5101_rf_init, |
| 184 |
.stop = grf5101_rf_stop, |
| 185 |
.set_chan = grf5101_rf_set_channel, |
| 186 |
.calc_rssi = grf5101_rf_calc_rssi, |
| 187 |
}; |