| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Radio tuning for Maxim max2820 on RTL8180 |
| 4 |
* |
| 5 |
* Copyright 2007 Andrea Merello <[email protected]> |
| 6 |
* |
| 7 |
* Code from the BSD driver and the rtl8181 project have been |
| 8 |
* very useful to understand certain things |
| 9 |
* |
| 10 |
* I want to thanks the Authors of such projects and the Ndiswrapper |
| 11 |
* project Authors. |
| 12 |
* |
| 13 |
* A special Big Thanks also is for all people who donated me cards, |
| 14 |
* making possible the creation of the original rtl8180 driver |
| 15 |
* from which this code is derived! |
| 16 |
*/ |
| 17 |
|
| 18 |
#include <linux/pci.h> |
| 19 |
#include <linux/delay.h> |
| 20 |
#include <net/mac80211.h> |
| 21 |
|
| 22 |
#include "rtl8180.h" |
| 23 |
#include "max2820.h" |
| 24 |
|
| 25 |
static const u32 max2820_chan[] = { |
| 26 |
12, /* CH 1 */ |
| 27 |
17, |
| 28 |
22, |
| 29 |
27, |
| 30 |
32, |
| 31 |
37, |
| 32 |
42, |
| 33 |
47, |
| 34 |
52, |
| 35 |
57, |
| 36 |
62, |
| 37 |
67, |
| 38 |
72, |
| 39 |
84, /* CH 14 */ |
| 40 |
}; |
| 41 |
|
| 42 |
static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data) |
| 43 |
{ |
| 44 |
struct rtl8180_priv *priv = dev->priv; |
| 45 |
u32 phy_config; |
| 46 |
|
| 47 |
phy_config = 0x90 + (data & 0xf); |
| 48 |
phy_config <<= 16; |
| 49 |
phy_config += addr; |
| 50 |
phy_config <<= 8; |
| 51 |
phy_config += (data >> 4) & 0xff; |
| 52 |
|
| 53 |
rtl818x_iowrite32(priv, |
| 54 |
(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); |
| 55 |
|
| 56 |
msleep(1); |
| 57 |
} |
| 58 |
|
| 59 |
static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan) |
| 60 |
{ |
| 61 |
struct rtl8180_priv *priv = dev->priv; |
| 62 |
u8 ant; |
| 63 |
|
| 64 |
ant = MAXIM_ANTENNA; |
| 65 |
if (priv->rfparam & RF_PARAM_ANTBDEFAULT) |
| 66 |
ant |= BB_ANTENNA_B; |
| 67 |
if (chan == 14) |
| 68 |
ant |= BB_ANTATTEN_CHAN14; |
| 69 |
|
| 70 |
rtl8180_write_phy(dev, 0x10, ant); |
| 71 |
} |
| 72 |
|
| 73 |
static u8 max2820_rf_calc_rssi(u8 agc, u8 sq) |
| 74 |
{ |
| 75 |
bool odd; |
| 76 |
|
| 77 |
odd = !!(agc & 1); |
| 78 |
|
| 79 |
agc >>= 1; |
| 80 |
if (odd) |
| 81 |
agc += 76; |
| 82 |
else |
| 83 |
agc += 66; |
| 84 |
|
| 85 |
/* TODO: change addends above to avoid mult / div below */ |
| 86 |
return 65 * agc / 100; |
| 87 |
} |
| 88 |
|
| 89 |
static void max2820_rf_set_channel(struct ieee80211_hw *dev, |
| 90 |
struct ieee80211_conf *conf) |
| 91 |
{ |
| 92 |
struct rtl8180_priv *priv = dev->priv; |
| 93 |
int channel = conf ? |
| 94 |
ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1; |
| 95 |
unsigned int chan_idx = channel - 1; |
| 96 |
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; |
| 97 |
u32 chan = max2820_chan[chan_idx]; |
| 98 |
|
| 99 |
/* While philips SA2400 drive the PA bias from |
| 100 |
* sa2400, for MAXIM we do this directly from BB */ |
| 101 |
rtl8180_write_phy(dev, 3, txpw); |
| 102 |
|
| 103 |
max2820_write_phy_antenna(dev, channel); |
| 104 |
write_max2820(dev, 3, chan); |
| 105 |
} |
| 106 |
|
| 107 |
static void max2820_rf_stop(struct ieee80211_hw *dev) |
| 108 |
{ |
| 109 |
rtl8180_write_phy(dev, 3, 0x8); |
| 110 |
write_max2820(dev, 1, 0); |
| 111 |
} |
| 112 |
|
| 113 |
|
| 114 |
static void max2820_rf_init(struct ieee80211_hw *dev) |
| 115 |
{ |
| 116 |
struct rtl8180_priv *priv = dev->priv; |
| 117 |
|
| 118 |
/* MAXIM from netbsd driver */ |
| 119 |
write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */ |
| 120 |
write_max2820(dev, 1, 0x01e); /* enable register */ |
| 121 |
write_max2820(dev, 2, 0x001); /* synt register */ |
| 122 |
|
| 123 |
max2820_rf_set_channel(dev, NULL); |
| 124 |
|
| 125 |
write_max2820(dev, 4, 0x313); /* rx register */ |
| 126 |
|
| 127 |
/* PA is driven directly by the BB, we keep the MAXIM bias |
| 128 |
* at the highest value in case that setting it to lower |
| 129 |
* values may introduce some further attenuation somewhere.. |
| 130 |
*/ |
| 131 |
write_max2820(dev, 5, 0x00f); |
| 132 |
|
| 133 |
/* baseband configuration */ |
| 134 |
rtl8180_write_phy(dev, 0, 0x88); /* sys1 */ |
| 135 |
rtl8180_write_phy(dev, 3, 0x08); /* txagc */ |
| 136 |
rtl8180_write_phy(dev, 4, 0xf8); /* lnadet */ |
| 137 |
rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit */ |
| 138 |
rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */ |
| 139 |
rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet */ |
| 140 |
|
| 141 |
max2820_write_phy_antenna(dev, 1); |
| 142 |
|
| 143 |
rtl8180_write_phy(dev, 0x11, 0x88); /* trl */ |
| 144 |
|
| 145 |
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & |
| 146 |
RTL818X_CONFIG2_ANTENNA_DIV) |
| 147 |
rtl8180_write_phy(dev, 0x12, 0xc7); |
| 148 |
else |
| 149 |
rtl8180_write_phy(dev, 0x12, 0x47); |
| 150 |
|
| 151 |
rtl8180_write_phy(dev, 0x13, 0x9b); |
| 152 |
|
| 153 |
rtl8180_write_phy(dev, 0x19, 0x0); /* CHESTLIM */ |
| 154 |
rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */ |
| 155 |
|
| 156 |
max2820_rf_set_channel(dev, NULL); |
| 157 |
} |
| 158 |
|
| 159 |
const struct rtl818x_rf_ops max2820_rf_ops = { |
| 160 |
.name = "Maxim", |
| 161 |
.init = max2820_rf_init, |
| 162 |
.stop = max2820_rf_stop, |
| 163 |
.set_chan = max2820_rf_set_channel, |
| 164 |
.calc_rssi = max2820_rf_calc_rssi, |
| 165 |
}; |