| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* NXP Wireless LAN device driver: USB specific handling |
| 4 |
* |
| 5 |
* Copyright 2011-2020 NXP |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "main.h" |
| 9 |
#include "usb.h" |
| 10 |
|
| 11 |
#define USB_VERSION "1.0" |
| 12 |
|
| 13 |
static const struct mwifiex_if_ops usb_ops; |
| 14 |
|
| 15 |
static const struct usb_device_id mwifiex_usb_table[] = { |
| 16 |
/* 8766 */ |
| 17 |
{USB_DEVICE(USB8XXX_VID, USB8766_PID_1)}, |
| 18 |
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8766_PID_2, |
| 19 |
USB_CLASS_VENDOR_SPEC, |
| 20 |
USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| 21 |
/* 8797 */ |
| 22 |
{USB_DEVICE(USB8XXX_VID, USB8797_PID_1)}, |
| 23 |
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2, |
| 24 |
USB_CLASS_VENDOR_SPEC, |
| 25 |
USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| 26 |
/* 8801 */ |
| 27 |
{USB_DEVICE(USB8XXX_VID, USB8801_PID_1)}, |
| 28 |
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8801_PID_2, |
| 29 |
USB_CLASS_VENDOR_SPEC, |
| 30 |
USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| 31 |
/* 8997 */ |
| 32 |
{USB_DEVICE(USB8XXX_VID, USB8997_PID_1)}, |
| 33 |
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8997_PID_2, |
| 34 |
USB_CLASS_VENDOR_SPEC, |
| 35 |
USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| 36 |
{ } /* Terminating entry */ |
| 37 |
}; |
| 38 |
|
| 39 |
MODULE_DEVICE_TABLE(usb, mwifiex_usb_table); |
| 40 |
|
| 41 |
static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size); |
| 42 |
|
| 43 |
/* This function handles received packet. Necessary action is taken based on |
| 44 |
* cmd/event/data. |
| 45 |
*/ |
| 46 |
static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, |
| 47 |
struct sk_buff *skb, u8 ep) |
| 48 |
{ |
| 49 |
u32 recv_type; |
| 50 |
__le32 tmp; |
| 51 |
int ret; |
| 52 |
|
| 53 |
if (adapter->hs_activated) |
| 54 |
mwifiex_process_hs_config(adapter); |
| 55 |
|
| 56 |
if (skb->len < INTF_HEADER_LEN) { |
| 57 |
mwifiex_dbg(adapter, ERROR, |
| 58 |
"%s: invalid skb->len\n", __func__); |
| 59 |
return -1; |
| 60 |
} |
| 61 |
|
| 62 |
switch (ep) { |
| 63 |
case MWIFIEX_USB_EP_CMD_EVENT: |
| 64 |
mwifiex_dbg(adapter, EVENT, |
| 65 |
"%s: EP_CMD_EVENT\n", __func__); |
| 66 |
skb_copy_from_linear_data(skb, &tmp, INTF_HEADER_LEN); |
| 67 |
recv_type = le32_to_cpu(tmp); |
| 68 |
skb_pull(skb, INTF_HEADER_LEN); |
| 69 |
|
| 70 |
switch (recv_type) { |
| 71 |
case MWIFIEX_USB_TYPE_CMD: |
| 72 |
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) { |
| 73 |
mwifiex_dbg(adapter, ERROR, |
| 74 |
"CMD: skb->len too large\n"); |
| 75 |
ret = -1; |
| 76 |
goto exit_restore_skb; |
| 77 |
} else if (!adapter->curr_cmd) { |
| 78 |
mwifiex_dbg(adapter, WARN, "CMD: no curr_cmd\n"); |
| 79 |
if (adapter->ps_state == PS_STATE_SLEEP_CFM) { |
| 80 |
mwifiex_process_sleep_confirm_resp( |
| 81 |
adapter, skb->data, |
| 82 |
skb->len); |
| 83 |
ret = 0; |
| 84 |
goto exit_restore_skb; |
| 85 |
} |
| 86 |
ret = -1; |
| 87 |
goto exit_restore_skb; |
| 88 |
} |
| 89 |
|
| 90 |
adapter->curr_cmd->resp_skb = skb; |
| 91 |
adapter->cmd_resp_received = true; |
| 92 |
break; |
| 93 |
case MWIFIEX_USB_TYPE_EVENT: |
| 94 |
if (skb->len < sizeof(u32)) { |
| 95 |
mwifiex_dbg(adapter, ERROR, |
| 96 |
"EVENT: skb->len too small\n"); |
| 97 |
ret = -1; |
| 98 |
goto exit_restore_skb; |
| 99 |
} |
| 100 |
skb_copy_from_linear_data(skb, &tmp, sizeof(u32)); |
| 101 |
adapter->event_cause = le32_to_cpu(tmp); |
| 102 |
mwifiex_dbg(adapter, EVENT, |
| 103 |
"event_cause %#x\n", adapter->event_cause); |
| 104 |
|
| 105 |
if (skb->len > MAX_EVENT_SIZE) { |
| 106 |
mwifiex_dbg(adapter, ERROR, |
| 107 |
"EVENT: event body too large\n"); |
| 108 |
ret = -1; |
| 109 |
goto exit_restore_skb; |
| 110 |
} |
| 111 |
|
| 112 |
memcpy(adapter->event_body, skb->data + |
| 113 |
MWIFIEX_EVENT_HEADER_LEN, skb->len); |
| 114 |
|
| 115 |
adapter->event_received = true; |
| 116 |
adapter->event_skb = skb; |
| 117 |
break; |
| 118 |
default: |
| 119 |
mwifiex_dbg(adapter, ERROR, |
| 120 |
"unknown recv_type %#x\n", recv_type); |
| 121 |
ret = -1; |
| 122 |
goto exit_restore_skb; |
| 123 |
} |
| 124 |
break; |
| 125 |
case MWIFIEX_USB_EP_DATA: |
| 126 |
mwifiex_dbg(adapter, DATA, "%s: EP_DATA\n", __func__); |
| 127 |
if (skb->len > MWIFIEX_RX_DATA_BUF_SIZE) { |
| 128 |
mwifiex_dbg(adapter, ERROR, |
| 129 |
"DATA: skb->len too large\n"); |
| 130 |
return -1; |
| 131 |
} |
| 132 |
|
| 133 |
skb_queue_tail(&adapter->rx_data_q, skb); |
| 134 |
adapter->data_received = true; |
| 135 |
atomic_inc(&adapter->rx_pending); |
| 136 |
break; |
| 137 |
default: |
| 138 |
mwifiex_dbg(adapter, ERROR, |
| 139 |
"%s: unknown endport %#x\n", __func__, ep); |
| 140 |
return -1; |
| 141 |
} |
| 142 |
|
| 143 |
return -EINPROGRESS; |
| 144 |
|
| 145 |
exit_restore_skb: |
| 146 |
/* The buffer will be reused for further cmds/events */ |
| 147 |
skb_push(skb, INTF_HEADER_LEN); |
| 148 |
|
| 149 |
return ret; |
| 150 |
} |
| 151 |
|
| 152 |
static void mwifiex_usb_rx_complete(struct urb *urb) |
| 153 |
{ |
| 154 |
struct urb_context *context = (struct urb_context *)urb->context; |
| 155 |
struct mwifiex_adapter *adapter = context->adapter; |
| 156 |
struct sk_buff *skb = context->skb; |
| 157 |
struct usb_card_rec *card; |
| 158 |
int recv_length = urb->actual_length; |
| 159 |
int size, status; |
| 160 |
|
| 161 |
if (!adapter || !adapter->card) { |
| 162 |
pr_err("mwifiex adapter or card structure is not valid\n"); |
| 163 |
return; |
| 164 |
} |
| 165 |
|
| 166 |
card = (struct usb_card_rec *)adapter->card; |
| 167 |
if (card->rx_cmd_ep == context->ep) |
| 168 |
atomic_dec(&card->rx_cmd_urb_pending); |
| 169 |
else |
| 170 |
atomic_dec(&card->rx_data_urb_pending); |
| 171 |
|
| 172 |
if (recv_length) { |
| 173 |
if (urb->status || |
| 174 |
test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) { |
| 175 |
mwifiex_dbg(adapter, ERROR, |
| 176 |
"URB status is failed: %d\n", urb->status); |
| 177 |
/* Do not free skb in case of command ep */ |
| 178 |
if (card->rx_cmd_ep != context->ep) |
| 179 |
dev_kfree_skb_any(skb); |
| 180 |
goto setup_for_next; |
| 181 |
} |
| 182 |
if (skb->len > recv_length) |
| 183 |
skb_trim(skb, recv_length); |
| 184 |
else |
| 185 |
skb_put(skb, recv_length - skb->len); |
| 186 |
|
| 187 |
status = mwifiex_usb_recv(adapter, skb, context->ep); |
| 188 |
|
| 189 |
mwifiex_dbg(adapter, INFO, |
| 190 |
"info: recv_length=%d, status=%d\n", |
| 191 |
recv_length, status); |
| 192 |
if (status == -EINPROGRESS) { |
| 193 |
mwifiex_queue_main_work(adapter); |
| 194 |
|
| 195 |
/* urb for data_ep is re-submitted now; |
| 196 |
* urb for cmd_ep will be re-submitted in callback |
| 197 |
* mwifiex_usb_recv_complete |
| 198 |
*/ |
| 199 |
if (card->rx_cmd_ep == context->ep) |
| 200 |
return; |
| 201 |
} else { |
| 202 |
if (status == -1) |
| 203 |
mwifiex_dbg(adapter, ERROR, |
| 204 |
"received data processing failed!\n"); |
| 205 |
|
| 206 |
/* Do not free skb in case of command ep */ |
| 207 |
if (card->rx_cmd_ep != context->ep) |
| 208 |
dev_kfree_skb_any(skb); |
| 209 |
} |
| 210 |
} else if (urb->status) { |
| 211 |
if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { |
| 212 |
mwifiex_dbg(adapter, FATAL, |
| 213 |
"Card is removed: %d\n", urb->status); |
| 214 |
set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 215 |
} |
| 216 |
dev_kfree_skb_any(skb); |
| 217 |
return; |
| 218 |
} else { |
| 219 |
/* Do not free skb in case of command ep */ |
| 220 |
if (card->rx_cmd_ep != context->ep) |
| 221 |
dev_kfree_skb_any(skb); |
| 222 |
|
| 223 |
/* fall through setup_for_next */ |
| 224 |
} |
| 225 |
|
| 226 |
setup_for_next: |
| 227 |
if (card->rx_cmd_ep == context->ep) |
| 228 |
size = MWIFIEX_RX_CMD_BUF_SIZE; |
| 229 |
else |
| 230 |
size = MWIFIEX_RX_DATA_BUF_SIZE; |
| 231 |
|
| 232 |
if (card->rx_cmd_ep == context->ep) { |
| 233 |
mwifiex_usb_submit_rx_urb(context, size); |
| 234 |
} else { |
| 235 |
if (atomic_read(&adapter->rx_pending) <= HIGH_RX_PENDING) { |
| 236 |
mwifiex_usb_submit_rx_urb(context, size); |
| 237 |
} else { |
| 238 |
context->skb = NULL; |
| 239 |
} |
| 240 |
} |
| 241 |
|
| 242 |
return; |
| 243 |
} |
| 244 |
|
| 245 |
static void mwifiex_usb_tx_complete(struct urb *urb) |
| 246 |
{ |
| 247 |
struct urb_context *context = (struct urb_context *)(urb->context); |
| 248 |
struct mwifiex_adapter *adapter = context->adapter; |
| 249 |
struct usb_card_rec *card = adapter->card; |
| 250 |
struct usb_tx_data_port *port; |
| 251 |
int i; |
| 252 |
|
| 253 |
mwifiex_dbg(adapter, INFO, |
| 254 |
"%s: status: %d\n", __func__, urb->status); |
| 255 |
|
| 256 |
if (context->ep == card->tx_cmd_ep) { |
| 257 |
mwifiex_dbg(adapter, CMD, |
| 258 |
"%s: CMD\n", __func__); |
| 259 |
atomic_dec(&card->tx_cmd_urb_pending); |
| 260 |
adapter->cmd_sent = false; |
| 261 |
} else { |
| 262 |
mwifiex_dbg(adapter, DATA, |
| 263 |
"%s: DATA\n", __func__); |
| 264 |
mwifiex_write_data_complete(adapter, context->skb, 0, |
| 265 |
urb->status ? -1 : 0); |
| 266 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 267 |
port = &card->port[i]; |
| 268 |
if (context->ep == port->tx_data_ep) { |
| 269 |
atomic_dec(&port->tx_data_urb_pending); |
| 270 |
port->block_status = false; |
| 271 |
break; |
| 272 |
} |
| 273 |
} |
| 274 |
adapter->data_sent = false; |
| 275 |
} |
| 276 |
|
| 277 |
if (card->mc_resync_flag) |
| 278 |
mwifiex_multi_chan_resync(adapter); |
| 279 |
|
| 280 |
mwifiex_queue_main_work(adapter); |
| 281 |
|
| 282 |
return; |
| 283 |
} |
| 284 |
|
| 285 |
static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size) |
| 286 |
{ |
| 287 |
struct mwifiex_adapter *adapter = ctx->adapter; |
| 288 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 289 |
|
| 290 |
if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { |
| 291 |
if (card->rx_cmd_ep == ctx->ep) { |
| 292 |
mwifiex_dbg(adapter, INFO, "%s: free rx_cmd skb\n", |
| 293 |
__func__); |
| 294 |
dev_kfree_skb_any(ctx->skb); |
| 295 |
ctx->skb = NULL; |
| 296 |
} |
| 297 |
mwifiex_dbg(adapter, ERROR, |
| 298 |
"%s: card removed/suspended, EP %d rx_cmd URB submit skipped\n", |
| 299 |
__func__, ctx->ep); |
| 300 |
return -1; |
| 301 |
} |
| 302 |
|
| 303 |
if (card->rx_cmd_ep != ctx->ep) { |
| 304 |
ctx->skb = dev_alloc_skb(size); |
| 305 |
if (!ctx->skb) { |
| 306 |
mwifiex_dbg(adapter, ERROR, |
| 307 |
"%s: dev_alloc_skb failed\n", __func__); |
| 308 |
return -ENOMEM; |
| 309 |
} |
| 310 |
} |
| 311 |
|
| 312 |
if (card->rx_cmd_ep == ctx->ep && |
| 313 |
card->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT) |
| 314 |
usb_fill_int_urb(ctx->urb, card->udev, |
| 315 |
usb_rcvintpipe(card->udev, ctx->ep), |
| 316 |
ctx->skb->data, size, mwifiex_usb_rx_complete, |
| 317 |
(void *)ctx, card->rx_cmd_interval); |
| 318 |
else |
| 319 |
usb_fill_bulk_urb(ctx->urb, card->udev, |
| 320 |
usb_rcvbulkpipe(card->udev, ctx->ep), |
| 321 |
ctx->skb->data, size, mwifiex_usb_rx_complete, |
| 322 |
(void *)ctx); |
| 323 |
|
| 324 |
if (card->rx_cmd_ep == ctx->ep) |
| 325 |
atomic_inc(&card->rx_cmd_urb_pending); |
| 326 |
else |
| 327 |
atomic_inc(&card->rx_data_urb_pending); |
| 328 |
|
| 329 |
if (usb_submit_urb(ctx->urb, GFP_ATOMIC)) { |
| 330 |
mwifiex_dbg(adapter, ERROR, "usb_submit_urb failed\n"); |
| 331 |
dev_kfree_skb_any(ctx->skb); |
| 332 |
ctx->skb = NULL; |
| 333 |
|
| 334 |
if (card->rx_cmd_ep == ctx->ep) |
| 335 |
atomic_dec(&card->rx_cmd_urb_pending); |
| 336 |
else |
| 337 |
atomic_dec(&card->rx_data_urb_pending); |
| 338 |
|
| 339 |
return -1; |
| 340 |
} |
| 341 |
|
| 342 |
return 0; |
| 343 |
} |
| 344 |
|
| 345 |
static void mwifiex_usb_free(struct usb_card_rec *card) |
| 346 |
{ |
| 347 |
struct usb_tx_data_port *port; |
| 348 |
int i, j; |
| 349 |
|
| 350 |
if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) |
| 351 |
usb_kill_urb(card->rx_cmd.urb); |
| 352 |
|
| 353 |
usb_free_urb(card->rx_cmd.urb); |
| 354 |
card->rx_cmd.urb = NULL; |
| 355 |
|
| 356 |
if (atomic_read(&card->rx_data_urb_pending)) |
| 357 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| 358 |
if (card->rx_data_list[i].urb) |
| 359 |
usb_kill_urb(card->rx_data_list[i].urb); |
| 360 |
|
| 361 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| 362 |
usb_free_urb(card->rx_data_list[i].urb); |
| 363 |
card->rx_data_list[i].urb = NULL; |
| 364 |
} |
| 365 |
|
| 366 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 367 |
port = &card->port[i]; |
| 368 |
for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| 369 |
usb_kill_urb(port->tx_data_list[j].urb); |
| 370 |
usb_free_urb(port->tx_data_list[j].urb); |
| 371 |
port->tx_data_list[j].urb = NULL; |
| 372 |
} |
| 373 |
} |
| 374 |
|
| 375 |
usb_free_urb(card->tx_cmd.urb); |
| 376 |
card->tx_cmd.urb = NULL; |
| 377 |
|
| 378 |
return; |
| 379 |
} |
| 380 |
|
| 381 |
/* This function probes an mwifiex device and registers it. It allocates |
| 382 |
* the card structure, initiates the device registration and initialization |
| 383 |
* procedure by adding a logical interface. |
| 384 |
*/ |
| 385 |
static int mwifiex_usb_probe(struct usb_interface *intf, |
| 386 |
const struct usb_device_id *id) |
| 387 |
{ |
| 388 |
struct usb_device *udev = interface_to_usbdev(intf); |
| 389 |
struct usb_host_interface *iface_desc = intf->cur_altsetting; |
| 390 |
struct usb_endpoint_descriptor *epd; |
| 391 |
int ret, i; |
| 392 |
struct usb_card_rec *card; |
| 393 |
u16 id_vendor, id_product, bcd_device; |
| 394 |
|
| 395 |
card = devm_kzalloc(&intf->dev, sizeof(*card), GFP_KERNEL); |
| 396 |
if (!card) |
| 397 |
return -ENOMEM; |
| 398 |
|
| 399 |
init_completion(&card->fw_done); |
| 400 |
|
| 401 |
id_vendor = le16_to_cpu(udev->descriptor.idVendor); |
| 402 |
id_product = le16_to_cpu(udev->descriptor.idProduct); |
| 403 |
bcd_device = le16_to_cpu(udev->descriptor.bcdDevice); |
| 404 |
pr_debug("info: VID/PID = %X/%X, Boot2 version = %X\n", |
| 405 |
id_vendor, id_product, bcd_device); |
| 406 |
|
| 407 |
/* PID_1 is used for firmware downloading only */ |
| 408 |
switch (id_product) { |
| 409 |
case USB8766_PID_1: |
| 410 |
case USB8797_PID_1: |
| 411 |
case USB8801_PID_1: |
| 412 |
case USB8997_PID_1: |
| 413 |
card->usb_boot_state = USB8XXX_FW_DNLD; |
| 414 |
break; |
| 415 |
case USB8766_PID_2: |
| 416 |
case USB8797_PID_2: |
| 417 |
case USB8801_PID_2: |
| 418 |
case USB8997_PID_2: |
| 419 |
card->usb_boot_state = USB8XXX_FW_READY; |
| 420 |
break; |
| 421 |
default: |
| 422 |
pr_warn("unknown id_product %#x\n", id_product); |
| 423 |
card->usb_boot_state = USB8XXX_FW_DNLD; |
| 424 |
break; |
| 425 |
} |
| 426 |
|
| 427 |
card->udev = udev; |
| 428 |
card->intf = intf; |
| 429 |
|
| 430 |
pr_debug("info: bcdUSB=%#x Device Class=%#x SubClass=%#x Protocol=%#x\n", |
| 431 |
le16_to_cpu(udev->descriptor.bcdUSB), |
| 432 |
udev->descriptor.bDeviceClass, |
| 433 |
udev->descriptor.bDeviceSubClass, |
| 434 |
udev->descriptor.bDeviceProtocol); |
| 435 |
|
| 436 |
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| 437 |
epd = &iface_desc->endpoint[i].desc; |
| 438 |
if (usb_endpoint_dir_in(epd) && |
| 439 |
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && |
| 440 |
(usb_endpoint_xfer_bulk(epd) || |
| 441 |
usb_endpoint_xfer_int(epd))) { |
| 442 |
card->rx_cmd_ep_type = usb_endpoint_type(epd); |
| 443 |
card->rx_cmd_interval = epd->bInterval; |
| 444 |
pr_debug("info: Rx CMD/EVT:: max pkt size: %d, addr: %d, ep_type: %d\n", |
| 445 |
le16_to_cpu(epd->wMaxPacketSize), |
| 446 |
epd->bEndpointAddress, card->rx_cmd_ep_type); |
| 447 |
card->rx_cmd_ep = usb_endpoint_num(epd); |
| 448 |
atomic_set(&card->rx_cmd_urb_pending, 0); |
| 449 |
} |
| 450 |
if (usb_endpoint_dir_in(epd) && |
| 451 |
usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && |
| 452 |
usb_endpoint_xfer_bulk(epd)) { |
| 453 |
pr_debug("info: bulk IN: max pkt size: %d, addr: %d\n", |
| 454 |
le16_to_cpu(epd->wMaxPacketSize), |
| 455 |
epd->bEndpointAddress); |
| 456 |
card->rx_data_ep = usb_endpoint_num(epd); |
| 457 |
atomic_set(&card->rx_data_urb_pending, 0); |
| 458 |
} |
| 459 |
if (usb_endpoint_dir_out(epd) && |
| 460 |
usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && |
| 461 |
usb_endpoint_xfer_bulk(epd)) { |
| 462 |
pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", |
| 463 |
le16_to_cpu(epd->wMaxPacketSize), |
| 464 |
epd->bEndpointAddress); |
| 465 |
card->port[0].tx_data_ep = usb_endpoint_num(epd); |
| 466 |
atomic_set(&card->port[0].tx_data_urb_pending, 0); |
| 467 |
} |
| 468 |
if (usb_endpoint_dir_out(epd) && |
| 469 |
usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA_CH2 && |
| 470 |
usb_endpoint_xfer_bulk(epd)) { |
| 471 |
pr_debug("info: bulk OUT chan2:\t" |
| 472 |
"max pkt size: %d, addr: %d\n", |
| 473 |
le16_to_cpu(epd->wMaxPacketSize), |
| 474 |
epd->bEndpointAddress); |
| 475 |
card->port[1].tx_data_ep = usb_endpoint_num(epd); |
| 476 |
atomic_set(&card->port[1].tx_data_urb_pending, 0); |
| 477 |
} |
| 478 |
if (usb_endpoint_dir_out(epd) && |
| 479 |
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && |
| 480 |
(usb_endpoint_xfer_bulk(epd) || |
| 481 |
usb_endpoint_xfer_int(epd))) { |
| 482 |
card->tx_cmd_ep_type = usb_endpoint_type(epd); |
| 483 |
card->tx_cmd_interval = epd->bInterval; |
| 484 |
pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", |
| 485 |
le16_to_cpu(epd->wMaxPacketSize), |
| 486 |
epd->bEndpointAddress); |
| 487 |
pr_debug("info: Tx CMD:: max pkt size: %d, addr: %d, ep_type: %d\n", |
| 488 |
le16_to_cpu(epd->wMaxPacketSize), |
| 489 |
epd->bEndpointAddress, card->tx_cmd_ep_type); |
| 490 |
card->tx_cmd_ep = usb_endpoint_num(epd); |
| 491 |
atomic_set(&card->tx_cmd_urb_pending, 0); |
| 492 |
card->bulk_out_maxpktsize = |
| 493 |
le16_to_cpu(epd->wMaxPacketSize); |
| 494 |
} |
| 495 |
} |
| 496 |
|
| 497 |
switch (card->usb_boot_state) { |
| 498 |
case USB8XXX_FW_DNLD: |
| 499 |
/* Reject broken descriptors. */ |
| 500 |
if (!card->rx_cmd_ep || !card->tx_cmd_ep) |
| 501 |
return -ENODEV; |
| 502 |
if (card->bulk_out_maxpktsize == 0) |
| 503 |
return -ENODEV; |
| 504 |
break; |
| 505 |
case USB8XXX_FW_READY: |
| 506 |
/* Assume the driver can handle missing endpoints for now. */ |
| 507 |
break; |
| 508 |
default: |
| 509 |
WARN_ON(1); |
| 510 |
return -ENODEV; |
| 511 |
} |
| 512 |
|
| 513 |
usb_set_intfdata(intf, card); |
| 514 |
|
| 515 |
ret = mwifiex_add_card(card, &card->fw_done, &usb_ops, |
| 516 |
MWIFIEX_USB, &card->udev->dev); |
| 517 |
if (ret) { |
| 518 |
pr_err("%s: mwifiex_add_card failed: %d\n", __func__, ret); |
| 519 |
usb_reset_device(udev); |
| 520 |
return ret; |
| 521 |
} |
| 522 |
|
| 523 |
usb_get_dev(udev); |
| 524 |
|
| 525 |
return 0; |
| 526 |
} |
| 527 |
|
| 528 |
/* Kernel needs to suspend all functions separately. Therefore all |
| 529 |
* registered functions must have drivers with suspend and resume |
| 530 |
* methods. Failing that the kernel simply removes the whole card. |
| 531 |
* |
| 532 |
* If already not suspended, this function allocates and sends a |
| 533 |
* 'host sleep activate' request to the firmware and turns off the traffic. |
| 534 |
*/ |
| 535 |
static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message) |
| 536 |
{ |
| 537 |
struct usb_card_rec *card = usb_get_intfdata(intf); |
| 538 |
struct mwifiex_adapter *adapter; |
| 539 |
struct usb_tx_data_port *port; |
| 540 |
int i, j; |
| 541 |
|
| 542 |
/* Might still be loading firmware */ |
| 543 |
wait_for_completion(&card->fw_done); |
| 544 |
|
| 545 |
adapter = card->adapter; |
| 546 |
if (!adapter) { |
| 547 |
dev_err(&intf->dev, "card is not valid\n"); |
| 548 |
return 0; |
| 549 |
} |
| 550 |
|
| 551 |
if (unlikely(test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags))) |
| 552 |
mwifiex_dbg(adapter, WARN, |
| 553 |
"Device already suspended\n"); |
| 554 |
|
| 555 |
/* Enable the Host Sleep */ |
| 556 |
if (!mwifiex_enable_hs(adapter)) { |
| 557 |
mwifiex_dbg(adapter, ERROR, |
| 558 |
"cmd: failed to suspend\n"); |
| 559 |
clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); |
| 560 |
return -EFAULT; |
| 561 |
} |
| 562 |
|
| 563 |
|
| 564 |
/* 'MWIFIEX_IS_SUSPENDED' bit indicates device is suspended. |
| 565 |
* It must be set here before the usb_kill_urb() calls. Reason |
| 566 |
* is in the complete handlers, urb->status(= -ENOENT) and |
| 567 |
* this flag is used in combination to distinguish between a |
| 568 |
* 'suspended' state and a 'disconnect' one. |
| 569 |
*/ |
| 570 |
set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| 571 |
clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); |
| 572 |
|
| 573 |
if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) |
| 574 |
usb_kill_urb(card->rx_cmd.urb); |
| 575 |
|
| 576 |
if (atomic_read(&card->rx_data_urb_pending)) |
| 577 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| 578 |
if (card->rx_data_list[i].urb) |
| 579 |
usb_kill_urb(card->rx_data_list[i].urb); |
| 580 |
|
| 581 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 582 |
port = &card->port[i]; |
| 583 |
for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| 584 |
if (port->tx_data_list[j].urb) |
| 585 |
usb_kill_urb(port->tx_data_list[j].urb); |
| 586 |
} |
| 587 |
} |
| 588 |
|
| 589 |
if (card->tx_cmd.urb) |
| 590 |
usb_kill_urb(card->tx_cmd.urb); |
| 591 |
|
| 592 |
return 0; |
| 593 |
} |
| 594 |
|
| 595 |
/* Kernel needs to suspend all functions separately. Therefore all |
| 596 |
* registered functions must have drivers with suspend and resume |
| 597 |
* methods. Failing that the kernel simply removes the whole card. |
| 598 |
* |
| 599 |
* If already not resumed, this function turns on the traffic and |
| 600 |
* sends a 'host sleep cancel' request to the firmware. |
| 601 |
*/ |
| 602 |
static int mwifiex_usb_resume(struct usb_interface *intf) |
| 603 |
{ |
| 604 |
struct usb_card_rec *card = usb_get_intfdata(intf); |
| 605 |
struct mwifiex_adapter *adapter; |
| 606 |
int i; |
| 607 |
|
| 608 |
if (!card->adapter) { |
| 609 |
dev_err(&intf->dev, "%s: card->adapter is NULL\n", |
| 610 |
__func__); |
| 611 |
return 0; |
| 612 |
} |
| 613 |
adapter = card->adapter; |
| 614 |
|
| 615 |
if (unlikely(!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags))) { |
| 616 |
mwifiex_dbg(adapter, WARN, |
| 617 |
"Device already resumed\n"); |
| 618 |
return 0; |
| 619 |
} |
| 620 |
|
| 621 |
/* Indicate device resumed. The netdev queue will be resumed only |
| 622 |
* after the urbs have been re-submitted |
| 623 |
*/ |
| 624 |
clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| 625 |
|
| 626 |
if (!atomic_read(&card->rx_data_urb_pending)) |
| 627 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| 628 |
mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], |
| 629 |
MWIFIEX_RX_DATA_BUF_SIZE); |
| 630 |
|
| 631 |
if (!atomic_read(&card->rx_cmd_urb_pending)) { |
| 632 |
card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); |
| 633 |
if (card->rx_cmd.skb) |
| 634 |
mwifiex_usb_submit_rx_urb(&card->rx_cmd, |
| 635 |
MWIFIEX_RX_CMD_BUF_SIZE); |
| 636 |
} |
| 637 |
|
| 638 |
/* Disable Host Sleep */ |
| 639 |
if (adapter->hs_activated) |
| 640 |
mwifiex_cancel_hs(mwifiex_get_priv(adapter, |
| 641 |
MWIFIEX_BSS_ROLE_ANY), |
| 642 |
MWIFIEX_ASYNC_CMD); |
| 643 |
|
| 644 |
return 0; |
| 645 |
} |
| 646 |
|
| 647 |
static void mwifiex_usb_disconnect(struct usb_interface *intf) |
| 648 |
{ |
| 649 |
struct usb_card_rec *card = usb_get_intfdata(intf); |
| 650 |
struct mwifiex_adapter *adapter; |
| 651 |
|
| 652 |
wait_for_completion(&card->fw_done); |
| 653 |
|
| 654 |
adapter = card->adapter; |
| 655 |
if (!adapter || !adapter->priv_num) |
| 656 |
return; |
| 657 |
|
| 658 |
if (card->udev->state != USB_STATE_NOTATTACHED && !adapter->mfg_mode) { |
| 659 |
mwifiex_deauthenticate_all(adapter); |
| 660 |
|
| 661 |
mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter, |
| 662 |
MWIFIEX_BSS_ROLE_ANY), |
| 663 |
MWIFIEX_FUNC_SHUTDOWN); |
| 664 |
} |
| 665 |
|
| 666 |
mwifiex_dbg(adapter, FATAL, |
| 667 |
"%s: removing card\n", __func__); |
| 668 |
mwifiex_remove_card(adapter); |
| 669 |
|
| 670 |
usb_put_dev(interface_to_usbdev(intf)); |
| 671 |
} |
| 672 |
|
| 673 |
static void mwifiex_usb_coredump(struct device *dev) |
| 674 |
{ |
| 675 |
struct usb_interface *intf = to_usb_interface(dev); |
| 676 |
struct usb_card_rec *card = usb_get_intfdata(intf); |
| 677 |
|
| 678 |
mwifiex_fw_dump_event(mwifiex_get_priv(card->adapter, |
| 679 |
MWIFIEX_BSS_ROLE_ANY)); |
| 680 |
} |
| 681 |
|
| 682 |
static struct usb_driver mwifiex_usb_driver = { |
| 683 |
.name = "mwifiex_usb", |
| 684 |
.probe = mwifiex_usb_probe, |
| 685 |
.disconnect = mwifiex_usb_disconnect, |
| 686 |
.id_table = mwifiex_usb_table, |
| 687 |
.suspend = mwifiex_usb_suspend, |
| 688 |
.resume = mwifiex_usb_resume, |
| 689 |
.soft_unbind = 1, |
| 690 |
.driver = { |
| 691 |
.coredump = mwifiex_usb_coredump, |
| 692 |
}, |
| 693 |
}; |
| 694 |
|
| 695 |
static int mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, |
| 696 |
u32 *len, u8 ep, u32 timeout) |
| 697 |
{ |
| 698 |
struct usb_card_rec *card = adapter->card; |
| 699 |
int actual_length, ret; |
| 700 |
|
| 701 |
if (!(*len % card->bulk_out_maxpktsize)) |
| 702 |
(*len)++; |
| 703 |
|
| 704 |
/* Send the data block */ |
| 705 |
ret = usb_bulk_msg(card->udev, usb_sndbulkpipe(card->udev, ep), pbuf, |
| 706 |
*len, &actual_length, timeout); |
| 707 |
if (ret) { |
| 708 |
mwifiex_dbg(adapter, ERROR, |
| 709 |
"usb_bulk_msg for tx failed: %d\n", ret); |
| 710 |
return ret; |
| 711 |
} |
| 712 |
|
| 713 |
*len = actual_length; |
| 714 |
|
| 715 |
return ret; |
| 716 |
} |
| 717 |
|
| 718 |
static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, |
| 719 |
u32 *len, u8 ep, u32 timeout) |
| 720 |
{ |
| 721 |
struct usb_card_rec *card = adapter->card; |
| 722 |
int actual_length, ret; |
| 723 |
|
| 724 |
/* Receive the data response */ |
| 725 |
ret = usb_bulk_msg(card->udev, usb_rcvbulkpipe(card->udev, ep), pbuf, |
| 726 |
*len, &actual_length, timeout); |
| 727 |
if (ret) { |
| 728 |
mwifiex_dbg(adapter, ERROR, |
| 729 |
"usb_bulk_msg for rx failed: %d\n", ret); |
| 730 |
return ret; |
| 731 |
} |
| 732 |
|
| 733 |
*len = actual_length; |
| 734 |
|
| 735 |
return ret; |
| 736 |
} |
| 737 |
|
| 738 |
static void mwifiex_usb_port_resync(struct mwifiex_adapter *adapter) |
| 739 |
{ |
| 740 |
struct usb_card_rec *card = adapter->card; |
| 741 |
u8 active_port = MWIFIEX_USB_EP_DATA; |
| 742 |
struct mwifiex_private *priv = NULL; |
| 743 |
int i; |
| 744 |
|
| 745 |
if (adapter->usb_mc_status) { |
| 746 |
for (i = 0; i < adapter->priv_num; i++) { |
| 747 |
priv = adapter->priv[i]; |
| 748 |
if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && |
| 749 |
!priv->bss_started) || |
| 750 |
(priv->bss_role == MWIFIEX_BSS_ROLE_STA && |
| 751 |
!priv->media_connected)) |
| 752 |
priv->usb_port = MWIFIEX_USB_EP_DATA; |
| 753 |
} |
| 754 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) |
| 755 |
card->port[i].block_status = false; |
| 756 |
} else { |
| 757 |
for (i = 0; i < adapter->priv_num; i++) { |
| 758 |
priv = adapter->priv[i]; |
| 759 |
if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && |
| 760 |
priv->bss_started) || |
| 761 |
(priv->bss_role == MWIFIEX_BSS_ROLE_STA && |
| 762 |
priv->media_connected)) { |
| 763 |
active_port = priv->usb_port; |
| 764 |
break; |
| 765 |
} |
| 766 |
} |
| 767 |
for (i = 0; i < adapter->priv_num; i++) { |
| 768 |
priv = adapter->priv[i]; |
| 769 |
priv->usb_port = active_port; |
| 770 |
} |
| 771 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 772 |
if (active_port == card->port[i].tx_data_ep) |
| 773 |
card->port[i].block_status = false; |
| 774 |
else |
| 775 |
card->port[i].block_status = true; |
| 776 |
} |
| 777 |
} |
| 778 |
} |
| 779 |
|
| 780 |
static bool mwifiex_usb_is_port_ready(struct mwifiex_private *priv) |
| 781 |
{ |
| 782 |
struct usb_card_rec *card = priv->adapter->card; |
| 783 |
int idx; |
| 784 |
|
| 785 |
for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| 786 |
if (priv->usb_port == card->port[idx].tx_data_ep) |
| 787 |
return !card->port[idx].block_status; |
| 788 |
} |
| 789 |
|
| 790 |
return false; |
| 791 |
} |
| 792 |
|
| 793 |
static inline u8 mwifiex_usb_data_sent(struct mwifiex_adapter *adapter) |
| 794 |
{ |
| 795 |
struct usb_card_rec *card = adapter->card; |
| 796 |
int i; |
| 797 |
|
| 798 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) |
| 799 |
if (!card->port[i].block_status) |
| 800 |
return false; |
| 801 |
|
| 802 |
return true; |
| 803 |
} |
| 804 |
|
| 805 |
static int mwifiex_usb_construct_send_urb(struct mwifiex_adapter *adapter, |
| 806 |
struct usb_tx_data_port *port, u8 ep, |
| 807 |
struct urb_context *context, |
| 808 |
struct sk_buff *skb_send) |
| 809 |
{ |
| 810 |
struct usb_card_rec *card = adapter->card; |
| 811 |
int ret = -EINPROGRESS; |
| 812 |
struct urb *tx_urb; |
| 813 |
|
| 814 |
context->adapter = adapter; |
| 815 |
context->ep = ep; |
| 816 |
context->skb = skb_send; |
| 817 |
tx_urb = context->urb; |
| 818 |
|
| 819 |
if (ep == card->tx_cmd_ep && |
| 820 |
card->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT) |
| 821 |
usb_fill_int_urb(tx_urb, card->udev, |
| 822 |
usb_sndintpipe(card->udev, ep), skb_send->data, |
| 823 |
skb_send->len, mwifiex_usb_tx_complete, |
| 824 |
(void *)context, card->tx_cmd_interval); |
| 825 |
else |
| 826 |
usb_fill_bulk_urb(tx_urb, card->udev, |
| 827 |
usb_sndbulkpipe(card->udev, ep), |
| 828 |
skb_send->data, skb_send->len, |
| 829 |
mwifiex_usb_tx_complete, (void *)context); |
| 830 |
|
| 831 |
tx_urb->transfer_flags |= URB_ZERO_PACKET; |
| 832 |
|
| 833 |
if (ep == card->tx_cmd_ep) |
| 834 |
atomic_inc(&card->tx_cmd_urb_pending); |
| 835 |
else |
| 836 |
atomic_inc(&port->tx_data_urb_pending); |
| 837 |
|
| 838 |
if (ep != card->tx_cmd_ep && |
| 839 |
atomic_read(&port->tx_data_urb_pending) == |
| 840 |
MWIFIEX_TX_DATA_URB) { |
| 841 |
port->block_status = true; |
| 842 |
adapter->data_sent = mwifiex_usb_data_sent(adapter); |
| 843 |
ret = -ENOSR; |
| 844 |
} |
| 845 |
|
| 846 |
if (usb_submit_urb(tx_urb, GFP_ATOMIC)) { |
| 847 |
mwifiex_dbg(adapter, ERROR, |
| 848 |
"%s: usb_submit_urb failed\n", __func__); |
| 849 |
if (ep == card->tx_cmd_ep) { |
| 850 |
atomic_dec(&card->tx_cmd_urb_pending); |
| 851 |
} else { |
| 852 |
atomic_dec(&port->tx_data_urb_pending); |
| 853 |
port->block_status = false; |
| 854 |
adapter->data_sent = false; |
| 855 |
if (port->tx_data_ix) |
| 856 |
port->tx_data_ix--; |
| 857 |
else |
| 858 |
port->tx_data_ix = MWIFIEX_TX_DATA_URB; |
| 859 |
} |
| 860 |
ret = -1; |
| 861 |
} |
| 862 |
|
| 863 |
return ret; |
| 864 |
} |
| 865 |
|
| 866 |
static int mwifiex_usb_prepare_tx_aggr_skb(struct mwifiex_adapter *adapter, |
| 867 |
struct usb_tx_data_port *port, |
| 868 |
struct sk_buff **skb_send) |
| 869 |
{ |
| 870 |
struct sk_buff *skb_aggr, *skb_tmp; |
| 871 |
u8 *payload, pad; |
| 872 |
u16 align = adapter->bus_aggr.tx_aggr_align; |
| 873 |
struct mwifiex_txinfo *tx_info = NULL; |
| 874 |
bool is_txinfo_set = false; |
| 875 |
|
| 876 |
/* Packets in aggr_list will be send in either skb_aggr or |
| 877 |
* write complete, delete the tx_aggr timer |
| 878 |
*/ |
| 879 |
if (port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| 880 |
timer_delete(&port->tx_aggr.timer_cnxt.hold_timer); |
| 881 |
port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| 882 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| 883 |
} |
| 884 |
|
| 885 |
skb_aggr = mwifiex_alloc_dma_align_buf(port->tx_aggr.aggr_len, |
| 886 |
GFP_ATOMIC); |
| 887 |
if (!skb_aggr) { |
| 888 |
mwifiex_dbg(adapter, ERROR, |
| 889 |
"%s: alloc skb_aggr failed\n", __func__); |
| 890 |
|
| 891 |
while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) |
| 892 |
mwifiex_write_data_complete(adapter, skb_tmp, 0, -1); |
| 893 |
|
| 894 |
port->tx_aggr.aggr_num = 0; |
| 895 |
port->tx_aggr.aggr_len = 0; |
| 896 |
return -EBUSY; |
| 897 |
} |
| 898 |
|
| 899 |
tx_info = MWIFIEX_SKB_TXCB(skb_aggr); |
| 900 |
memset(tx_info, 0, sizeof(*tx_info)); |
| 901 |
|
| 902 |
while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) { |
| 903 |
/* padding for aligning next packet header*/ |
| 904 |
pad = (align - (skb_tmp->len & (align - 1))) % align; |
| 905 |
payload = skb_put(skb_aggr, skb_tmp->len + pad); |
| 906 |
memcpy(payload, skb_tmp->data, skb_tmp->len); |
| 907 |
if (skb_queue_empty(&port->tx_aggr.aggr_list)) { |
| 908 |
/* do not padding for last packet*/ |
| 909 |
*(__le16 *)payload = cpu_to_le16(skb_tmp->len); |
| 910 |
*(__le16 *)&payload[2] = |
| 911 |
cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); |
| 912 |
skb_trim(skb_aggr, skb_aggr->len - pad); |
| 913 |
} else { |
| 914 |
/* add aggregation interface header */ |
| 915 |
*(__le16 *)payload = cpu_to_le16(skb_tmp->len + pad); |
| 916 |
*(__le16 *)&payload[2] = |
| 917 |
cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2); |
| 918 |
} |
| 919 |
|
| 920 |
if (!is_txinfo_set) { |
| 921 |
tx_info->bss_num = MWIFIEX_SKB_TXCB(skb_tmp)->bss_num; |
| 922 |
tx_info->bss_type = MWIFIEX_SKB_TXCB(skb_tmp)->bss_type; |
| 923 |
is_txinfo_set = true; |
| 924 |
} |
| 925 |
|
| 926 |
port->tx_aggr.aggr_num--; |
| 927 |
port->tx_aggr.aggr_len -= (skb_tmp->len + pad); |
| 928 |
mwifiex_write_data_complete(adapter, skb_tmp, 0, 0); |
| 929 |
} |
| 930 |
|
| 931 |
tx_info->pkt_len = skb_aggr->len - |
| 932 |
(sizeof(struct txpd) + adapter->intf_hdr_len); |
| 933 |
tx_info->flags |= MWIFIEX_BUF_FLAG_AGGR_PKT; |
| 934 |
|
| 935 |
port->tx_aggr.aggr_num = 0; |
| 936 |
port->tx_aggr.aggr_len = 0; |
| 937 |
*skb_send = skb_aggr; |
| 938 |
|
| 939 |
return 0; |
| 940 |
} |
| 941 |
|
| 942 |
/* This function prepare data packet to be send under usb tx aggregation |
| 943 |
* protocol, check current usb aggregation status, link packet to aggrgation |
| 944 |
* list if possible, work flow as below: |
| 945 |
* (1) if only 1 packet available, add usb tx aggregation header and send. |
| 946 |
* (2) if packet is able to aggregated, link it to current aggregation list. |
| 947 |
* (3) if packet is not able to aggregated, aggregate and send exist packets |
| 948 |
* in aggrgation list. Then, link packet in the list if there is more |
| 949 |
* packet in transmit queue, otherwise try to transmit single packet. |
| 950 |
*/ |
| 951 |
static int mwifiex_usb_aggr_tx_data(struct mwifiex_adapter *adapter, u8 ep, |
| 952 |
struct sk_buff *skb, |
| 953 |
struct mwifiex_tx_param *tx_param, |
| 954 |
struct usb_tx_data_port *port) |
| 955 |
{ |
| 956 |
u8 *payload, pad; |
| 957 |
u16 align = adapter->bus_aggr.tx_aggr_align; |
| 958 |
struct sk_buff *skb_send = NULL; |
| 959 |
struct urb_context *context = NULL; |
| 960 |
struct txpd *local_tx_pd = |
| 961 |
(struct txpd *)((u8 *)skb->data + adapter->intf_hdr_len); |
| 962 |
u8 f_send_aggr_buf = 0; |
| 963 |
u8 f_send_cur_buf = 0; |
| 964 |
u8 f_precopy_cur_buf = 0; |
| 965 |
u8 f_postcopy_cur_buf = 0; |
| 966 |
u32 timeout; |
| 967 |
int ret; |
| 968 |
|
| 969 |
/* padding to ensure each packet alginment */ |
| 970 |
pad = (align - (skb->len & (align - 1))) % align; |
| 971 |
|
| 972 |
if (tx_param && tx_param->next_pkt_len) { |
| 973 |
/* next packet available in tx queue*/ |
| 974 |
if (port->tx_aggr.aggr_len + skb->len + pad > |
| 975 |
adapter->bus_aggr.tx_aggr_max_size) { |
| 976 |
f_send_aggr_buf = 1; |
| 977 |
f_postcopy_cur_buf = 1; |
| 978 |
} else { |
| 979 |
/* current packet could be aggregated*/ |
| 980 |
f_precopy_cur_buf = 1; |
| 981 |
|
| 982 |
if (port->tx_aggr.aggr_len + skb->len + pad + |
| 983 |
tx_param->next_pkt_len > |
| 984 |
adapter->bus_aggr.tx_aggr_max_size || |
| 985 |
port->tx_aggr.aggr_num + 2 > |
| 986 |
adapter->bus_aggr.tx_aggr_max_num) { |
| 987 |
/* next packet could not be aggregated |
| 988 |
* send current aggregation buffer |
| 989 |
*/ |
| 990 |
f_send_aggr_buf = 1; |
| 991 |
} |
| 992 |
} |
| 993 |
} else { |
| 994 |
/* last packet in tx queue */ |
| 995 |
if (port->tx_aggr.aggr_num > 0) { |
| 996 |
/* pending packets in aggregation buffer*/ |
| 997 |
if (port->tx_aggr.aggr_len + skb->len + pad > |
| 998 |
adapter->bus_aggr.tx_aggr_max_size) { |
| 999 |
/* current packet not be able to aggregated, |
| 1000 |
* send aggr buffer first, then send packet. |
| 1001 |
*/ |
| 1002 |
f_send_cur_buf = 1; |
| 1003 |
} else { |
| 1004 |
/* last packet, Aggregation and send */ |
| 1005 |
f_precopy_cur_buf = 1; |
| 1006 |
} |
| 1007 |
|
| 1008 |
f_send_aggr_buf = 1; |
| 1009 |
} else { |
| 1010 |
/* no pending packets in aggregation buffer, |
| 1011 |
* send current packet immediately |
| 1012 |
*/ |
| 1013 |
f_send_cur_buf = 1; |
| 1014 |
} |
| 1015 |
} |
| 1016 |
|
| 1017 |
if (local_tx_pd->flags & MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET) { |
| 1018 |
/* Send NULL packet immediately*/ |
| 1019 |
if (f_precopy_cur_buf) { |
| 1020 |
if (skb_queue_empty(&port->tx_aggr.aggr_list)) { |
| 1021 |
f_precopy_cur_buf = 0; |
| 1022 |
f_send_aggr_buf = 0; |
| 1023 |
f_send_cur_buf = 1; |
| 1024 |
} else { |
| 1025 |
f_send_aggr_buf = 1; |
| 1026 |
} |
| 1027 |
} else if (f_postcopy_cur_buf) { |
| 1028 |
f_send_cur_buf = 1; |
| 1029 |
f_postcopy_cur_buf = 0; |
| 1030 |
} |
| 1031 |
} |
| 1032 |
|
| 1033 |
if (f_precopy_cur_buf) { |
| 1034 |
skb_queue_tail(&port->tx_aggr.aggr_list, skb); |
| 1035 |
port->tx_aggr.aggr_len += (skb->len + pad); |
| 1036 |
port->tx_aggr.aggr_num++; |
| 1037 |
if (f_send_aggr_buf) |
| 1038 |
goto send_aggr_buf; |
| 1039 |
|
| 1040 |
/* packet will not been send immediately, |
| 1041 |
* set a timer to make sure it will be sent under |
| 1042 |
* strict time limit. Dynamically fit the timeout |
| 1043 |
* value, according to packets number in aggr_list |
| 1044 |
*/ |
| 1045 |
if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| 1046 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs = |
| 1047 |
MWIFIEX_USB_TX_AGGR_TMO_MIN; |
| 1048 |
timeout = |
| 1049 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| 1050 |
mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| 1051 |
jiffies + msecs_to_jiffies(timeout)); |
| 1052 |
port->tx_aggr.timer_cnxt.is_hold_timer_set = true; |
| 1053 |
} else { |
| 1054 |
if (port->tx_aggr.timer_cnxt.hold_tmo_msecs < |
| 1055 |
MWIFIEX_USB_TX_AGGR_TMO_MAX) { |
| 1056 |
/* Dyanmic fit timeout */ |
| 1057 |
timeout = |
| 1058 |
++port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| 1059 |
mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| 1060 |
jiffies + msecs_to_jiffies(timeout)); |
| 1061 |
} |
| 1062 |
} |
| 1063 |
} |
| 1064 |
|
| 1065 |
send_aggr_buf: |
| 1066 |
if (f_send_aggr_buf) { |
| 1067 |
ret = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); |
| 1068 |
if (!ret) { |
| 1069 |
context = &port->tx_data_list[port->tx_data_ix++]; |
| 1070 |
ret = mwifiex_usb_construct_send_urb(adapter, port, ep, |
| 1071 |
context, skb_send); |
| 1072 |
if (ret == -1) |
| 1073 |
mwifiex_write_data_complete(adapter, skb_send, |
| 1074 |
0, -1); |
| 1075 |
} |
| 1076 |
} |
| 1077 |
|
| 1078 |
if (f_send_cur_buf) { |
| 1079 |
if (f_send_aggr_buf) { |
| 1080 |
if (atomic_read(&port->tx_data_urb_pending) >= |
| 1081 |
MWIFIEX_TX_DATA_URB) { |
| 1082 |
port->block_status = true; |
| 1083 |
adapter->data_sent = |
| 1084 |
mwifiex_usb_data_sent(adapter); |
| 1085 |
/* no available urb, postcopy packet*/ |
| 1086 |
f_postcopy_cur_buf = 1; |
| 1087 |
goto postcopy_cur_buf; |
| 1088 |
} |
| 1089 |
|
| 1090 |
if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| 1091 |
port->tx_data_ix = 0; |
| 1092 |
} |
| 1093 |
|
| 1094 |
payload = skb->data; |
| 1095 |
*(__le16 *)&payload[2] = |
| 1096 |
cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); |
| 1097 |
*(__le16 *)payload = cpu_to_le16(skb->len); |
| 1098 |
skb_send = skb; |
| 1099 |
context = &port->tx_data_list[port->tx_data_ix++]; |
| 1100 |
return mwifiex_usb_construct_send_urb(adapter, port, ep, |
| 1101 |
context, skb_send); |
| 1102 |
} |
| 1103 |
|
| 1104 |
postcopy_cur_buf: |
| 1105 |
if (f_postcopy_cur_buf) { |
| 1106 |
skb_queue_tail(&port->tx_aggr.aggr_list, skb); |
| 1107 |
port->tx_aggr.aggr_len += (skb->len + pad); |
| 1108 |
port->tx_aggr.aggr_num++; |
| 1109 |
/* New aggregation begin, start timer */ |
| 1110 |
if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| 1111 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs = |
| 1112 |
MWIFIEX_USB_TX_AGGR_TMO_MIN; |
| 1113 |
timeout = port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| 1114 |
mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| 1115 |
jiffies + msecs_to_jiffies(timeout)); |
| 1116 |
port->tx_aggr.timer_cnxt.is_hold_timer_set = true; |
| 1117 |
} |
| 1118 |
} |
| 1119 |
|
| 1120 |
return -EINPROGRESS; |
| 1121 |
} |
| 1122 |
|
| 1123 |
static void mwifiex_usb_tx_aggr_tmo(struct timer_list *t) |
| 1124 |
{ |
| 1125 |
struct urb_context *urb_cnxt = NULL; |
| 1126 |
struct sk_buff *skb_send = NULL; |
| 1127 |
struct tx_aggr_tmr_cnxt *timer_context = |
| 1128 |
timer_container_of(timer_context, t, hold_timer); |
| 1129 |
struct mwifiex_adapter *adapter = timer_context->adapter; |
| 1130 |
struct usb_tx_data_port *port = timer_context->port; |
| 1131 |
int err = 0; |
| 1132 |
|
| 1133 |
spin_lock_bh(&port->tx_aggr_lock); |
| 1134 |
err = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); |
| 1135 |
if (err) { |
| 1136 |
mwifiex_dbg(adapter, ERROR, |
| 1137 |
"prepare tx aggr skb failed, err=%d\n", err); |
| 1138 |
goto unlock; |
| 1139 |
} |
| 1140 |
|
| 1141 |
if (atomic_read(&port->tx_data_urb_pending) >= |
| 1142 |
MWIFIEX_TX_DATA_URB) { |
| 1143 |
port->block_status = true; |
| 1144 |
adapter->data_sent = |
| 1145 |
mwifiex_usb_data_sent(adapter); |
| 1146 |
err = -1; |
| 1147 |
goto done; |
| 1148 |
} |
| 1149 |
|
| 1150 |
if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| 1151 |
port->tx_data_ix = 0; |
| 1152 |
|
| 1153 |
urb_cnxt = &port->tx_data_list[port->tx_data_ix++]; |
| 1154 |
err = mwifiex_usb_construct_send_urb(adapter, port, port->tx_data_ep, |
| 1155 |
urb_cnxt, skb_send); |
| 1156 |
done: |
| 1157 |
if (err == -1) |
| 1158 |
mwifiex_write_data_complete(adapter, skb_send, 0, -1); |
| 1159 |
unlock: |
| 1160 |
spin_unlock_bh(&port->tx_aggr_lock); |
| 1161 |
} |
| 1162 |
|
| 1163 |
/* This function write a command/data packet to card. */ |
| 1164 |
static int mwifiex_usb_host_to_card(struct mwifiex_adapter *adapter, u8 ep, |
| 1165 |
struct sk_buff *skb, |
| 1166 |
struct mwifiex_tx_param *tx_param) |
| 1167 |
{ |
| 1168 |
struct usb_card_rec *card = adapter->card; |
| 1169 |
struct urb_context *context = NULL; |
| 1170 |
struct usb_tx_data_port *port = NULL; |
| 1171 |
int idx, ret; |
| 1172 |
|
| 1173 |
if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { |
| 1174 |
mwifiex_dbg(adapter, ERROR, |
| 1175 |
"%s: not allowed while suspended\n", __func__); |
| 1176 |
return -1; |
| 1177 |
} |
| 1178 |
|
| 1179 |
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) { |
| 1180 |
mwifiex_dbg(adapter, ERROR, "%s: device removed\n", __func__); |
| 1181 |
return -1; |
| 1182 |
} |
| 1183 |
|
| 1184 |
mwifiex_dbg(adapter, INFO, "%s: ep=%d\n", __func__, ep); |
| 1185 |
|
| 1186 |
if (ep == card->tx_cmd_ep) { |
| 1187 |
context = &card->tx_cmd; |
| 1188 |
} else { |
| 1189 |
/* get the data port structure for endpoint */ |
| 1190 |
for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| 1191 |
if (ep == card->port[idx].tx_data_ep) { |
| 1192 |
port = &card->port[idx]; |
| 1193 |
if (atomic_read(&port->tx_data_urb_pending) |
| 1194 |
>= MWIFIEX_TX_DATA_URB) { |
| 1195 |
port->block_status = true; |
| 1196 |
adapter->data_sent = |
| 1197 |
mwifiex_usb_data_sent(adapter); |
| 1198 |
return -EBUSY; |
| 1199 |
} |
| 1200 |
if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| 1201 |
port->tx_data_ix = 0; |
| 1202 |
break; |
| 1203 |
} |
| 1204 |
} |
| 1205 |
|
| 1206 |
if (!port) { |
| 1207 |
mwifiex_dbg(adapter, ERROR, "Wrong usb tx data port\n"); |
| 1208 |
return -1; |
| 1209 |
} |
| 1210 |
|
| 1211 |
if (adapter->bus_aggr.enable) { |
| 1212 |
spin_lock_bh(&port->tx_aggr_lock); |
| 1213 |
ret = mwifiex_usb_aggr_tx_data(adapter, ep, skb, |
| 1214 |
tx_param, port); |
| 1215 |
spin_unlock_bh(&port->tx_aggr_lock); |
| 1216 |
return ret; |
| 1217 |
} |
| 1218 |
|
| 1219 |
context = &port->tx_data_list[port->tx_data_ix++]; |
| 1220 |
} |
| 1221 |
|
| 1222 |
return mwifiex_usb_construct_send_urb(adapter, port, ep, context, skb); |
| 1223 |
} |
| 1224 |
|
| 1225 |
static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter) |
| 1226 |
{ |
| 1227 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1228 |
struct usb_tx_data_port *port; |
| 1229 |
int i, j; |
| 1230 |
|
| 1231 |
card->tx_cmd.adapter = adapter; |
| 1232 |
card->tx_cmd.ep = card->tx_cmd_ep; |
| 1233 |
|
| 1234 |
card->tx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); |
| 1235 |
if (!card->tx_cmd.urb) |
| 1236 |
return -ENOMEM; |
| 1237 |
|
| 1238 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 1239 |
port = &card->port[i]; |
| 1240 |
if (!port->tx_data_ep) |
| 1241 |
continue; |
| 1242 |
port->tx_data_ix = 0; |
| 1243 |
skb_queue_head_init(&port->tx_aggr.aggr_list); |
| 1244 |
if (port->tx_data_ep == MWIFIEX_USB_EP_DATA) |
| 1245 |
port->block_status = false; |
| 1246 |
else |
| 1247 |
port->block_status = true; |
| 1248 |
for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| 1249 |
port->tx_data_list[j].adapter = adapter; |
| 1250 |
port->tx_data_list[j].ep = port->tx_data_ep; |
| 1251 |
port->tx_data_list[j].urb = |
| 1252 |
usb_alloc_urb(0, GFP_KERNEL); |
| 1253 |
if (!port->tx_data_list[j].urb) |
| 1254 |
return -ENOMEM; |
| 1255 |
} |
| 1256 |
|
| 1257 |
port->tx_aggr.timer_cnxt.adapter = adapter; |
| 1258 |
port->tx_aggr.timer_cnxt.port = port; |
| 1259 |
port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| 1260 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| 1261 |
timer_setup(&port->tx_aggr.timer_cnxt.hold_timer, |
| 1262 |
mwifiex_usb_tx_aggr_tmo, 0); |
| 1263 |
} |
| 1264 |
|
| 1265 |
return 0; |
| 1266 |
} |
| 1267 |
|
| 1268 |
static int mwifiex_usb_rx_init(struct mwifiex_adapter *adapter) |
| 1269 |
{ |
| 1270 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1271 |
int i; |
| 1272 |
|
| 1273 |
card->rx_cmd.adapter = adapter; |
| 1274 |
card->rx_cmd.ep = card->rx_cmd_ep; |
| 1275 |
|
| 1276 |
card->rx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); |
| 1277 |
if (!card->rx_cmd.urb) |
| 1278 |
return -ENOMEM; |
| 1279 |
|
| 1280 |
card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); |
| 1281 |
if (!card->rx_cmd.skb) |
| 1282 |
return -ENOMEM; |
| 1283 |
|
| 1284 |
if (mwifiex_usb_submit_rx_urb(&card->rx_cmd, MWIFIEX_RX_CMD_BUF_SIZE)) |
| 1285 |
return -1; |
| 1286 |
|
| 1287 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| 1288 |
card->rx_data_list[i].adapter = adapter; |
| 1289 |
card->rx_data_list[i].ep = card->rx_data_ep; |
| 1290 |
|
| 1291 |
card->rx_data_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); |
| 1292 |
if (!card->rx_data_list[i].urb) |
| 1293 |
return -1; |
| 1294 |
if (mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], |
| 1295 |
MWIFIEX_RX_DATA_BUF_SIZE)) |
| 1296 |
return -1; |
| 1297 |
} |
| 1298 |
|
| 1299 |
return 0; |
| 1300 |
} |
| 1301 |
|
| 1302 |
/* This function register usb device and initialize parameter. */ |
| 1303 |
static int mwifiex_register_dev(struct mwifiex_adapter *adapter) |
| 1304 |
{ |
| 1305 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1306 |
|
| 1307 |
card->adapter = adapter; |
| 1308 |
|
| 1309 |
switch (le16_to_cpu(card->udev->descriptor.idProduct)) { |
| 1310 |
case USB8997_PID_1: |
| 1311 |
case USB8997_PID_2: |
| 1312 |
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K; |
| 1313 |
strcpy(adapter->fw_name, USB8997_DEFAULT_FW_NAME); |
| 1314 |
adapter->ext_scan = true; |
| 1315 |
break; |
| 1316 |
case USB8766_PID_1: |
| 1317 |
case USB8766_PID_2: |
| 1318 |
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| 1319 |
strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME); |
| 1320 |
adapter->ext_scan = true; |
| 1321 |
break; |
| 1322 |
case USB8801_PID_1: |
| 1323 |
case USB8801_PID_2: |
| 1324 |
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| 1325 |
strcpy(adapter->fw_name, USB8801_DEFAULT_FW_NAME); |
| 1326 |
adapter->ext_scan = false; |
| 1327 |
break; |
| 1328 |
case USB8797_PID_1: |
| 1329 |
case USB8797_PID_2: |
| 1330 |
default: |
| 1331 |
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| 1332 |
strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME); |
| 1333 |
break; |
| 1334 |
} |
| 1335 |
|
| 1336 |
adapter->usb_mc_status = false; |
| 1337 |
adapter->usb_mc_setup = false; |
| 1338 |
|
| 1339 |
return 0; |
| 1340 |
} |
| 1341 |
|
| 1342 |
static void mwifiex_usb_cleanup_tx_aggr(struct mwifiex_adapter *adapter) |
| 1343 |
{ |
| 1344 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1345 |
struct usb_tx_data_port *port; |
| 1346 |
struct sk_buff *skb_tmp; |
| 1347 |
int idx; |
| 1348 |
|
| 1349 |
for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| 1350 |
port = &card->port[idx]; |
| 1351 |
if (adapter->bus_aggr.enable) |
| 1352 |
while ((skb_tmp = |
| 1353 |
skb_dequeue(&port->tx_aggr.aggr_list))) |
| 1354 |
mwifiex_write_data_complete(adapter, skb_tmp, |
| 1355 |
0, -1); |
| 1356 |
if (port->tx_aggr.timer_cnxt.hold_timer.function) |
| 1357 |
timer_delete_sync(&port->tx_aggr.timer_cnxt.hold_timer); |
| 1358 |
port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| 1359 |
port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| 1360 |
} |
| 1361 |
} |
| 1362 |
|
| 1363 |
static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) |
| 1364 |
{ |
| 1365 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1366 |
|
| 1367 |
mwifiex_usb_free(card); |
| 1368 |
|
| 1369 |
mwifiex_usb_cleanup_tx_aggr(adapter); |
| 1370 |
|
| 1371 |
card->adapter = NULL; |
| 1372 |
} |
| 1373 |
|
| 1374 |
static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, |
| 1375 |
struct mwifiex_fw_image *fw) |
| 1376 |
{ |
| 1377 |
int ret = 0; |
| 1378 |
u8 *firmware = fw->fw_buf, *recv_buff; |
| 1379 |
u32 retries = USB8XXX_FW_MAX_RETRY + 1; |
| 1380 |
u32 dlen; |
| 1381 |
u32 fw_seqnum = 0, tlen = 0, dnld_cmd = 0; |
| 1382 |
struct fw_data *fwdata; |
| 1383 |
struct fw_sync_header sync_fw; |
| 1384 |
u8 check_winner = 1; |
| 1385 |
|
| 1386 |
if (!firmware) { |
| 1387 |
mwifiex_dbg(adapter, ERROR, |
| 1388 |
"No firmware image found! Terminating download\n"); |
| 1389 |
ret = -1; |
| 1390 |
goto fw_exit; |
| 1391 |
} |
| 1392 |
|
| 1393 |
/* Allocate memory for transmit */ |
| 1394 |
fwdata = kzalloc(FW_DNLD_TX_BUF_SIZE, GFP_KERNEL); |
| 1395 |
if (!fwdata) { |
| 1396 |
ret = -ENOMEM; |
| 1397 |
goto fw_exit; |
| 1398 |
} |
| 1399 |
|
| 1400 |
/* Allocate memory for receive */ |
| 1401 |
recv_buff = kzalloc(FW_DNLD_RX_BUF_SIZE, GFP_KERNEL); |
| 1402 |
if (!recv_buff) { |
| 1403 |
ret = -ENOMEM; |
| 1404 |
goto cleanup; |
| 1405 |
} |
| 1406 |
|
| 1407 |
do { |
| 1408 |
/* Send pseudo data to check winner status first */ |
| 1409 |
if (check_winner) { |
| 1410 |
memset(&fwdata->fw_hdr, 0, sizeof(struct fw_header)); |
| 1411 |
dlen = 0; |
| 1412 |
} else { |
| 1413 |
/* copy the header of the fw_data to get the length */ |
| 1414 |
memcpy(&fwdata->fw_hdr, &firmware[tlen], |
| 1415 |
sizeof(struct fw_header)); |
| 1416 |
|
| 1417 |
dlen = le32_to_cpu(fwdata->fw_hdr.data_len); |
| 1418 |
dnld_cmd = le32_to_cpu(fwdata->fw_hdr.dnld_cmd); |
| 1419 |
tlen += sizeof(struct fw_header); |
| 1420 |
|
| 1421 |
/* Command 7 doesn't have data length field */ |
| 1422 |
if (dnld_cmd == FW_CMD_7) |
| 1423 |
dlen = 0; |
| 1424 |
|
| 1425 |
memcpy(fwdata->data, &firmware[tlen], dlen); |
| 1426 |
|
| 1427 |
fwdata->seq_num = cpu_to_le32(fw_seqnum); |
| 1428 |
tlen += dlen; |
| 1429 |
} |
| 1430 |
|
| 1431 |
/* If the send/receive fails or CRC occurs then retry */ |
| 1432 |
while (--retries) { |
| 1433 |
u8 *buf = (u8 *)fwdata; |
| 1434 |
u32 len = FW_DATA_XMIT_SIZE; |
| 1435 |
|
| 1436 |
/* send the firmware block */ |
| 1437 |
ret = mwifiex_write_data_sync(adapter, buf, &len, |
| 1438 |
MWIFIEX_USB_EP_CMD_EVENT, |
| 1439 |
MWIFIEX_USB_TIMEOUT); |
| 1440 |
if (ret) { |
| 1441 |
mwifiex_dbg(adapter, ERROR, |
| 1442 |
"write_data_sync: failed: %d\n", |
| 1443 |
ret); |
| 1444 |
continue; |
| 1445 |
} |
| 1446 |
|
| 1447 |
buf = recv_buff; |
| 1448 |
len = FW_DNLD_RX_BUF_SIZE; |
| 1449 |
|
| 1450 |
/* Receive the firmware block response */ |
| 1451 |
ret = mwifiex_read_data_sync(adapter, buf, &len, |
| 1452 |
MWIFIEX_USB_EP_CMD_EVENT, |
| 1453 |
MWIFIEX_USB_TIMEOUT); |
| 1454 |
if (ret) { |
| 1455 |
mwifiex_dbg(adapter, ERROR, |
| 1456 |
"read_data_sync: failed: %d\n", |
| 1457 |
ret); |
| 1458 |
continue; |
| 1459 |
} |
| 1460 |
|
| 1461 |
memcpy(&sync_fw, recv_buff, |
| 1462 |
sizeof(struct fw_sync_header)); |
| 1463 |
|
| 1464 |
/* check 1st firmware block resp for highest bit set */ |
| 1465 |
if (check_winner) { |
| 1466 |
if (le32_to_cpu(sync_fw.cmd) & 0x80000000) { |
| 1467 |
mwifiex_dbg(adapter, WARN, |
| 1468 |
"USB is not the winner %#x\n", |
| 1469 |
sync_fw.cmd); |
| 1470 |
|
| 1471 |
/* returning success */ |
| 1472 |
ret = 0; |
| 1473 |
goto cleanup; |
| 1474 |
} |
| 1475 |
|
| 1476 |
mwifiex_dbg(adapter, MSG, |
| 1477 |
"start to download FW...\n"); |
| 1478 |
|
| 1479 |
check_winner = 0; |
| 1480 |
break; |
| 1481 |
} |
| 1482 |
|
| 1483 |
/* check the firmware block response for CRC errors */ |
| 1484 |
if (sync_fw.cmd) { |
| 1485 |
mwifiex_dbg(adapter, ERROR, |
| 1486 |
"FW received block with CRC %#x\n", |
| 1487 |
sync_fw.cmd); |
| 1488 |
ret = -1; |
| 1489 |
continue; |
| 1490 |
} |
| 1491 |
|
| 1492 |
retries = USB8XXX_FW_MAX_RETRY + 1; |
| 1493 |
break; |
| 1494 |
} |
| 1495 |
fw_seqnum++; |
| 1496 |
} while ((dnld_cmd != FW_HAS_LAST_BLOCK) && retries); |
| 1497 |
|
| 1498 |
cleanup: |
| 1499 |
mwifiex_dbg(adapter, MSG, |
| 1500 |
"info: FW download over, size %d bytes\n", tlen); |
| 1501 |
|
| 1502 |
kfree(recv_buff); |
| 1503 |
kfree(fwdata); |
| 1504 |
|
| 1505 |
if (retries) |
| 1506 |
ret = 0; |
| 1507 |
fw_exit: |
| 1508 |
return ret; |
| 1509 |
} |
| 1510 |
|
| 1511 |
static int mwifiex_usb_dnld_fw(struct mwifiex_adapter *adapter, |
| 1512 |
struct mwifiex_fw_image *fw) |
| 1513 |
{ |
| 1514 |
int ret; |
| 1515 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1516 |
|
| 1517 |
if (card->usb_boot_state == USB8XXX_FW_DNLD) { |
| 1518 |
ret = mwifiex_prog_fw_w_helper(adapter, fw); |
| 1519 |
if (ret) |
| 1520 |
return -1; |
| 1521 |
|
| 1522 |
/* Boot state changes after successful firmware download */ |
| 1523 |
if (card->usb_boot_state == USB8XXX_FW_DNLD) |
| 1524 |
return -1; |
| 1525 |
} |
| 1526 |
|
| 1527 |
ret = mwifiex_usb_rx_init(adapter); |
| 1528 |
if (!ret) |
| 1529 |
ret = mwifiex_usb_tx_init(adapter); |
| 1530 |
|
| 1531 |
return ret; |
| 1532 |
} |
| 1533 |
|
| 1534 |
static void mwifiex_submit_rx_urb(struct mwifiex_adapter *adapter, u8 ep) |
| 1535 |
{ |
| 1536 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1537 |
|
| 1538 |
skb_push(card->rx_cmd.skb, INTF_HEADER_LEN); |
| 1539 |
if ((ep == card->rx_cmd_ep) && |
| 1540 |
(!atomic_read(&card->rx_cmd_urb_pending))) |
| 1541 |
mwifiex_usb_submit_rx_urb(&card->rx_cmd, |
| 1542 |
MWIFIEX_RX_CMD_BUF_SIZE); |
| 1543 |
|
| 1544 |
return; |
| 1545 |
} |
| 1546 |
|
| 1547 |
static int mwifiex_usb_cmd_event_complete(struct mwifiex_adapter *adapter, |
| 1548 |
struct sk_buff *skb) |
| 1549 |
{ |
| 1550 |
mwifiex_submit_rx_urb(adapter, MWIFIEX_USB_EP_CMD_EVENT); |
| 1551 |
|
| 1552 |
return 0; |
| 1553 |
} |
| 1554 |
|
| 1555 |
/* This function wakes up the card. */ |
| 1556 |
static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) |
| 1557 |
{ |
| 1558 |
/* Simulation of HS_AWAKE event */ |
| 1559 |
adapter->pm_wakeup_fw_try = false; |
| 1560 |
timer_delete(&adapter->wakeup_timer); |
| 1561 |
adapter->pm_wakeup_card_req = false; |
| 1562 |
adapter->ps_state = PS_STATE_AWAKE; |
| 1563 |
|
| 1564 |
return 0; |
| 1565 |
} |
| 1566 |
|
| 1567 |
static void mwifiex_usb_submit_rem_rx_urbs(struct mwifiex_adapter *adapter) |
| 1568 |
{ |
| 1569 |
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| 1570 |
int i; |
| 1571 |
struct urb_context *ctx; |
| 1572 |
|
| 1573 |
for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| 1574 |
if (card->rx_data_list[i].skb) |
| 1575 |
continue; |
| 1576 |
ctx = &card->rx_data_list[i]; |
| 1577 |
mwifiex_usb_submit_rx_urb(ctx, MWIFIEX_RX_DATA_BUF_SIZE); |
| 1578 |
} |
| 1579 |
} |
| 1580 |
|
| 1581 |
/* This function is called after the card has woken up. */ |
| 1582 |
static inline int |
| 1583 |
mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) |
| 1584 |
{ |
| 1585 |
return 0; |
| 1586 |
} |
| 1587 |
|
| 1588 |
static const struct mwifiex_if_ops usb_ops = { |
| 1589 |
.register_dev = mwifiex_register_dev, |
| 1590 |
.unregister_dev = mwifiex_unregister_dev, |
| 1591 |
.wakeup = mwifiex_pm_wakeup_card, |
| 1592 |
.wakeup_complete = mwifiex_pm_wakeup_card_complete, |
| 1593 |
|
| 1594 |
/* USB specific */ |
| 1595 |
.dnld_fw = mwifiex_usb_dnld_fw, |
| 1596 |
.cmdrsp_complete = mwifiex_usb_cmd_event_complete, |
| 1597 |
.event_complete = mwifiex_usb_cmd_event_complete, |
| 1598 |
.host_to_card = mwifiex_usb_host_to_card, |
| 1599 |
.submit_rem_rx_urbs = mwifiex_usb_submit_rem_rx_urbs, |
| 1600 |
.multi_port_resync = mwifiex_usb_port_resync, |
| 1601 |
.is_port_ready = mwifiex_usb_is_port_ready, |
| 1602 |
}; |
| 1603 |
|
| 1604 |
module_usb_driver(mwifiex_usb_driver); |
| 1605 |
|
| 1606 |
MODULE_AUTHOR("Marvell International Ltd."); |
| 1607 |
MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION); |
| 1608 |
MODULE_VERSION(USB_VERSION); |
| 1609 |
MODULE_LICENSE("GPL v2"); |
| 1610 |
MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME); |
| 1611 |
MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME); |
| 1612 |
MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME); |
| 1613 |
MODULE_FIRMWARE(USB8997_DEFAULT_FW_NAME); |