| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* NXP Wireless LAN device driver: debugfs |
| 4 |
* |
| 5 |
* Copyright 2011-2020 NXP |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/debugfs.h> |
| 9 |
|
| 10 |
#include "main.h" |
| 11 |
#include "11n.h" |
| 12 |
|
| 13 |
|
| 14 |
static struct dentry *mwifiex_dfs_dir; |
| 15 |
|
| 16 |
static char *bss_modes[] = { |
| 17 |
"UNSPECIFIED", |
| 18 |
"ADHOC", |
| 19 |
"STATION", |
| 20 |
"AP", |
| 21 |
"AP_VLAN", |
| 22 |
"WDS", |
| 23 |
"MONITOR", |
| 24 |
"MESH_POINT", |
| 25 |
"P2P_CLIENT", |
| 26 |
"P2P_GO", |
| 27 |
"P2P_DEVICE", |
| 28 |
}; |
| 29 |
|
| 30 |
/* |
| 31 |
* Proc info file read handler. |
| 32 |
* |
| 33 |
* This function is called when the 'info' file is opened for reading. |
| 34 |
* It prints the following driver related information - |
| 35 |
* - Driver name |
| 36 |
* - Driver version |
| 37 |
* - Driver extended version |
| 38 |
* - Interface name |
| 39 |
* - BSS mode |
| 40 |
* - Media state (connected or disconnected) |
| 41 |
* - MAC address |
| 42 |
* - Total number of Tx bytes |
| 43 |
* - Total number of Rx bytes |
| 44 |
* - Total number of Tx packets |
| 45 |
* - Total number of Rx packets |
| 46 |
* - Total number of dropped Tx packets |
| 47 |
* - Total number of dropped Rx packets |
| 48 |
* - Total number of corrupted Tx packets |
| 49 |
* - Total number of corrupted Rx packets |
| 50 |
* - Carrier status (on or off) |
| 51 |
* - Tx queue status (started or stopped) |
| 52 |
* |
| 53 |
* For STA mode drivers, it also prints the following extra - |
| 54 |
* - ESSID |
| 55 |
* - BSSID |
| 56 |
* - Channel |
| 57 |
* - Region code |
| 58 |
* - Multicast count |
| 59 |
* - Multicast addresses |
| 60 |
*/ |
| 61 |
static ssize_t |
| 62 |
mwifiex_info_read(struct file *file, char __user *ubuf, |
| 63 |
size_t count, loff_t *ppos) |
| 64 |
{ |
| 65 |
struct mwifiex_private *priv = |
| 66 |
(struct mwifiex_private *) file->private_data; |
| 67 |
struct net_device *netdev = priv->netdev; |
| 68 |
struct netdev_hw_addr *ha; |
| 69 |
struct netdev_queue *txq; |
| 70 |
unsigned long page = get_zeroed_page(GFP_KERNEL); |
| 71 |
char *p = (char *) page, fmt[64]; |
| 72 |
struct mwifiex_bss_info info; |
| 73 |
ssize_t ret; |
| 74 |
int i = 0; |
| 75 |
|
| 76 |
if (!p) |
| 77 |
return -ENOMEM; |
| 78 |
|
| 79 |
memset(&info, 0, sizeof(info)); |
| 80 |
ret = mwifiex_get_bss_info(priv, &info); |
| 81 |
if (ret) |
| 82 |
goto free_and_exit; |
| 83 |
|
| 84 |
mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1); |
| 85 |
|
| 86 |
mwifiex_get_ver_ext(priv, 0); |
| 87 |
|
| 88 |
p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); |
| 89 |
p += sprintf(p, "driver_version = %s", fmt); |
| 90 |
p += sprintf(p, "\nverext = %s", priv->version_str); |
| 91 |
p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); |
| 92 |
|
| 93 |
if (info.bss_mode >= ARRAY_SIZE(bss_modes)) |
| 94 |
p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); |
| 95 |
else |
| 96 |
p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); |
| 97 |
|
| 98 |
p += sprintf(p, "media_state=\"%s\"\n", |
| 99 |
(!priv->media_connected ? "Disconnected" : "Connected")); |
| 100 |
p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); |
| 101 |
|
| 102 |
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) { |
| 103 |
p += sprintf(p, "multicast_count=\"%d\"\n", |
| 104 |
netdev_mc_count(netdev)); |
| 105 |
p += sprintf(p, "essid=\"%.*s\"\n", info.ssid.ssid_len, |
| 106 |
info.ssid.ssid); |
| 107 |
p += sprintf(p, "bssid=\"%pM\"\n", info.bssid); |
| 108 |
p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan); |
| 109 |
p += sprintf(p, "country_code = \"%s\"\n", info.country_code); |
| 110 |
p += sprintf(p, "region_code=\"0x%x\"\n", |
| 111 |
priv->adapter->region_code); |
| 112 |
|
| 113 |
netdev_for_each_mc_addr(ha, netdev) |
| 114 |
p += sprintf(p, "multicast_address[%d]=\"%pM\"\n", |
| 115 |
i++, ha->addr); |
| 116 |
} |
| 117 |
|
| 118 |
p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes); |
| 119 |
p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes); |
| 120 |
p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets); |
| 121 |
p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets); |
| 122 |
p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped); |
| 123 |
p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped); |
| 124 |
p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors); |
| 125 |
p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors); |
| 126 |
p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev)) |
| 127 |
? "on" : "off")); |
| 128 |
p += sprintf(p, "tx queue"); |
| 129 |
for (i = 0; i < netdev->num_tx_queues; i++) { |
| 130 |
txq = netdev_get_tx_queue(netdev, i); |
| 131 |
p += sprintf(p, " %d:%s", i, netif_tx_queue_stopped(txq) ? |
| 132 |
"stopped" : "started"); |
| 133 |
} |
| 134 |
p += sprintf(p, "\n"); |
| 135 |
|
| 136 |
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| 137 |
(unsigned long) p - page); |
| 138 |
|
| 139 |
free_and_exit: |
| 140 |
free_page(page); |
| 141 |
return ret; |
| 142 |
} |
| 143 |
|
| 144 |
/* |
| 145 |
* Proc getlog file read handler. |
| 146 |
* |
| 147 |
* This function is called when the 'getlog' file is opened for reading |
| 148 |
* It prints the following log information - |
| 149 |
* - Number of multicast Tx frames |
| 150 |
* - Number of failed packets |
| 151 |
* - Number of Tx retries |
| 152 |
* - Number of multicast Tx retries |
| 153 |
* - Number of duplicate frames |
| 154 |
* - Number of RTS successes |
| 155 |
* - Number of RTS failures |
| 156 |
* - Number of ACK failures |
| 157 |
* - Number of fragmented Rx frames |
| 158 |
* - Number of multicast Rx frames |
| 159 |
* - Number of FCS errors |
| 160 |
* - Number of Tx frames |
| 161 |
* - WEP ICV error counts |
| 162 |
* - Number of received beacons |
| 163 |
* - Number of missed beacons |
| 164 |
*/ |
| 165 |
static ssize_t |
| 166 |
mwifiex_getlog_read(struct file *file, char __user *ubuf, |
| 167 |
size_t count, loff_t *ppos) |
| 168 |
{ |
| 169 |
struct mwifiex_private *priv = |
| 170 |
(struct mwifiex_private *) file->private_data; |
| 171 |
unsigned long page = get_zeroed_page(GFP_KERNEL); |
| 172 |
char *p = (char *) page; |
| 173 |
ssize_t ret; |
| 174 |
struct mwifiex_ds_get_stats stats; |
| 175 |
|
| 176 |
if (!p) |
| 177 |
return -ENOMEM; |
| 178 |
|
| 179 |
memset(&stats, 0, sizeof(stats)); |
| 180 |
ret = mwifiex_get_stats_info(priv, &stats); |
| 181 |
if (ret) |
| 182 |
goto free_and_exit; |
| 183 |
|
| 184 |
p += sprintf(p, "\n" |
| 185 |
"mcasttxframe %u\n" |
| 186 |
"failed %u\n" |
| 187 |
"retry %u\n" |
| 188 |
"multiretry %u\n" |
| 189 |
"framedup %u\n" |
| 190 |
"rtssuccess %u\n" |
| 191 |
"rtsfailure %u\n" |
| 192 |
"ackfailure %u\n" |
| 193 |
"rxfrag %u\n" |
| 194 |
"mcastrxframe %u\n" |
| 195 |
"fcserror %u\n" |
| 196 |
"txframe %u\n" |
| 197 |
"wepicverrcnt-1 %u\n" |
| 198 |
"wepicverrcnt-2 %u\n" |
| 199 |
"wepicverrcnt-3 %u\n" |
| 200 |
"wepicverrcnt-4 %u\n" |
| 201 |
"bcn_rcv_cnt %u\n" |
| 202 |
"bcn_miss_cnt %u\n", |
| 203 |
stats.mcast_tx_frame, |
| 204 |
stats.failed, |
| 205 |
stats.retry, |
| 206 |
stats.multi_retry, |
| 207 |
stats.frame_dup, |
| 208 |
stats.rts_success, |
| 209 |
stats.rts_failure, |
| 210 |
stats.ack_failure, |
| 211 |
stats.rx_frag, |
| 212 |
stats.mcast_rx_frame, |
| 213 |
stats.fcs_error, |
| 214 |
stats.tx_frame, |
| 215 |
stats.wep_icv_error[0], |
| 216 |
stats.wep_icv_error[1], |
| 217 |
stats.wep_icv_error[2], |
| 218 |
stats.wep_icv_error[3], |
| 219 |
stats.bcn_rcv_cnt, |
| 220 |
stats.bcn_miss_cnt); |
| 221 |
|
| 222 |
|
| 223 |
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| 224 |
(unsigned long) p - page); |
| 225 |
|
| 226 |
free_and_exit: |
| 227 |
free_page(page); |
| 228 |
return ret; |
| 229 |
} |
| 230 |
|
| 231 |
/* Sysfs histogram file read handler. |
| 232 |
* |
| 233 |
* This function is called when the 'histogram' file is opened for reading |
| 234 |
* It prints the following histogram information - |
| 235 |
* - Number of histogram samples |
| 236 |
* - Receive packet number of each rx_rate |
| 237 |
* - Receive packet number of each snr |
| 238 |
* - Receive packet number of each nosie_flr |
| 239 |
* - Receive packet number of each signal streath |
| 240 |
*/ |
| 241 |
static ssize_t |
| 242 |
mwifiex_histogram_read(struct file *file, char __user *ubuf, |
| 243 |
size_t count, loff_t *ppos) |
| 244 |
{ |
| 245 |
struct mwifiex_private *priv = |
| 246 |
(struct mwifiex_private *)file->private_data; |
| 247 |
ssize_t ret; |
| 248 |
struct mwifiex_histogram_data *phist_data; |
| 249 |
int i, value; |
| 250 |
unsigned long page = get_zeroed_page(GFP_KERNEL); |
| 251 |
char *p = (char *)page; |
| 252 |
|
| 253 |
if (!p) |
| 254 |
return -ENOMEM; |
| 255 |
|
| 256 |
if (!priv || !priv->hist_data) { |
| 257 |
ret = -EFAULT; |
| 258 |
goto free_and_exit; |
| 259 |
} |
| 260 |
|
| 261 |
phist_data = priv->hist_data; |
| 262 |
|
| 263 |
p += sprintf(p, "\n" |
| 264 |
"total samples = %d\n", |
| 265 |
atomic_read(&phist_data->num_samples)); |
| 266 |
|
| 267 |
p += sprintf(p, |
| 268 |
"rx rates (in Mbps): 0=1M 1=2M 2=5.5M 3=11M 4=6M 5=9M 6=12M\n" |
| 269 |
"7=18M 8=24M 9=36M 10=48M 11=54M 12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n"); |
| 270 |
|
| 271 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { |
| 272 |
p += sprintf(p, |
| 273 |
"44-53=MCS0-9(VHT:BW20) 54-63=MCS0-9(VHT:BW40) 64-73=MCS0-9(VHT:BW80)\n\n"); |
| 274 |
} else { |
| 275 |
p += sprintf(p, "\n"); |
| 276 |
} |
| 277 |
|
| 278 |
for (i = 0; i < MWIFIEX_MAX_RX_RATES; i++) { |
| 279 |
value = atomic_read(&phist_data->rx_rate[i]); |
| 280 |
if (value) |
| 281 |
p += sprintf(p, "rx_rate[%02d] = %d\n", i, value); |
| 282 |
} |
| 283 |
|
| 284 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { |
| 285 |
for (i = MWIFIEX_MAX_RX_RATES; i < MWIFIEX_MAX_AC_RX_RATES; |
| 286 |
i++) { |
| 287 |
value = atomic_read(&phist_data->rx_rate[i]); |
| 288 |
if (value) |
| 289 |
p += sprintf(p, "rx_rate[%02d] = %d\n", |
| 290 |
i, value); |
| 291 |
} |
| 292 |
} |
| 293 |
|
| 294 |
for (i = 0; i < MWIFIEX_MAX_SNR; i++) { |
| 295 |
value = atomic_read(&phist_data->snr[i]); |
| 296 |
if (value) |
| 297 |
p += sprintf(p, "snr[%02ddB] = %d\n", i, value); |
| 298 |
} |
| 299 |
for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) { |
| 300 |
value = atomic_read(&phist_data->noise_flr[i]); |
| 301 |
if (value) |
| 302 |
p += sprintf(p, "noise_flr[%02ddBm] = %d\n", |
| 303 |
(int)(i-128), value); |
| 304 |
} |
| 305 |
for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) { |
| 306 |
value = atomic_read(&phist_data->sig_str[i]); |
| 307 |
if (value) |
| 308 |
p += sprintf(p, "sig_strength[-%02ddBm] = %d\n", |
| 309 |
i, value); |
| 310 |
} |
| 311 |
|
| 312 |
ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page, |
| 313 |
(unsigned long)p - page); |
| 314 |
|
| 315 |
free_and_exit: |
| 316 |
free_page(page); |
| 317 |
return ret; |
| 318 |
} |
| 319 |
|
| 320 |
static ssize_t |
| 321 |
mwifiex_histogram_write(struct file *file, const char __user *ubuf, |
| 322 |
size_t count, loff_t *ppos) |
| 323 |
{ |
| 324 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 325 |
|
| 326 |
if (priv && priv->hist_data) |
| 327 |
mwifiex_hist_data_reset(priv); |
| 328 |
return 0; |
| 329 |
} |
| 330 |
|
| 331 |
static struct mwifiex_debug_info info; |
| 332 |
|
| 333 |
/* |
| 334 |
* Proc debug file read handler. |
| 335 |
* |
| 336 |
* This function is called when the 'debug' file is opened for reading |
| 337 |
* It prints the following log information - |
| 338 |
* - Interrupt count |
| 339 |
* - WMM AC VO packets count |
| 340 |
* - WMM AC VI packets count |
| 341 |
* - WMM AC BE packets count |
| 342 |
* - WMM AC BK packets count |
| 343 |
* - Maximum Tx buffer size |
| 344 |
* - Tx buffer size |
| 345 |
* - Current Tx buffer size |
| 346 |
* - Power Save mode |
| 347 |
* - Power Save state |
| 348 |
* - Deep Sleep status |
| 349 |
* - Device wakeup required status |
| 350 |
* - Number of wakeup tries |
| 351 |
* - Host Sleep configured status |
| 352 |
* - Host Sleep activated status |
| 353 |
* - Number of Tx timeouts |
| 354 |
* - Number of command timeouts |
| 355 |
* - Last timed out command ID |
| 356 |
* - Last timed out command action |
| 357 |
* - Last command ID |
| 358 |
* - Last command action |
| 359 |
* - Last command index |
| 360 |
* - Last command response ID |
| 361 |
* - Last command response index |
| 362 |
* - Last event |
| 363 |
* - Last event index |
| 364 |
* - Number of host to card command failures |
| 365 |
* - Number of sleep confirm command failures |
| 366 |
* - Number of host to card data failure |
| 367 |
* - Number of deauthentication events |
| 368 |
* - Number of disassociation events |
| 369 |
* - Number of link lost events |
| 370 |
* - Number of deauthentication commands |
| 371 |
* - Number of association success commands |
| 372 |
* - Number of association failure commands |
| 373 |
* - Number of commands sent |
| 374 |
* - Number of data packets sent |
| 375 |
* - Number of command responses received |
| 376 |
* - Number of events received |
| 377 |
* - Tx BA stream table (TID, RA) |
| 378 |
* - Rx reorder table (TID, TA, Start window, Window size, Buffer) |
| 379 |
*/ |
| 380 |
static ssize_t |
| 381 |
mwifiex_debug_read(struct file *file, char __user *ubuf, |
| 382 |
size_t count, loff_t *ppos) |
| 383 |
{ |
| 384 |
struct mwifiex_private *priv = |
| 385 |
(struct mwifiex_private *) file->private_data; |
| 386 |
unsigned long page = get_zeroed_page(GFP_KERNEL); |
| 387 |
char *p = (char *) page; |
| 388 |
ssize_t ret; |
| 389 |
|
| 390 |
if (!p) |
| 391 |
return -ENOMEM; |
| 392 |
|
| 393 |
ret = mwifiex_get_debug_info(priv, &info); |
| 394 |
if (ret) |
| 395 |
goto free_and_exit; |
| 396 |
|
| 397 |
p += mwifiex_debug_info_to_buffer(priv, p, &info); |
| 398 |
|
| 399 |
ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| 400 |
(unsigned long) p - page); |
| 401 |
|
| 402 |
free_and_exit: |
| 403 |
free_page(page); |
| 404 |
return ret; |
| 405 |
} |
| 406 |
|
| 407 |
static u32 saved_reg_type, saved_reg_offset, saved_reg_value; |
| 408 |
|
| 409 |
/* |
| 410 |
* Proc regrdwr file write handler. |
| 411 |
* |
| 412 |
* This function is called when the 'regrdwr' file is opened for writing |
| 413 |
* |
| 414 |
* This function can be used to write to a register. |
| 415 |
*/ |
| 416 |
static ssize_t |
| 417 |
mwifiex_regrdwr_write(struct file *file, |
| 418 |
const char __user *ubuf, size_t count, loff_t *ppos) |
| 419 |
{ |
| 420 |
char *buf; |
| 421 |
int ret; |
| 422 |
u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX; |
| 423 |
|
| 424 |
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); |
| 425 |
if (IS_ERR(buf)) |
| 426 |
return PTR_ERR(buf); |
| 427 |
|
| 428 |
if (sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value) != 3) { |
| 429 |
ret = -EINVAL; |
| 430 |
goto done; |
| 431 |
} |
| 432 |
|
| 433 |
if (reg_type == 0 || reg_offset == 0) { |
| 434 |
ret = -EINVAL; |
| 435 |
goto done; |
| 436 |
} else { |
| 437 |
saved_reg_type = reg_type; |
| 438 |
saved_reg_offset = reg_offset; |
| 439 |
saved_reg_value = reg_value; |
| 440 |
ret = count; |
| 441 |
} |
| 442 |
done: |
| 443 |
kfree(buf); |
| 444 |
return ret; |
| 445 |
} |
| 446 |
|
| 447 |
/* |
| 448 |
* Proc regrdwr file read handler. |
| 449 |
* |
| 450 |
* This function is called when the 'regrdwr' file is opened for reading |
| 451 |
* |
| 452 |
* This function can be used to read from a register. |
| 453 |
*/ |
| 454 |
static ssize_t |
| 455 |
mwifiex_regrdwr_read(struct file *file, char __user *ubuf, |
| 456 |
size_t count, loff_t *ppos) |
| 457 |
{ |
| 458 |
struct mwifiex_private *priv = |
| 459 |
(struct mwifiex_private *) file->private_data; |
| 460 |
unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| 461 |
char *buf = (char *) addr; |
| 462 |
int pos = 0, ret = 0; |
| 463 |
u32 reg_value; |
| 464 |
|
| 465 |
if (!buf) |
| 466 |
return -ENOMEM; |
| 467 |
|
| 468 |
if (!saved_reg_type) { |
| 469 |
/* No command has been given */ |
| 470 |
pos += snprintf(buf, PAGE_SIZE, "0"); |
| 471 |
goto done; |
| 472 |
} |
| 473 |
/* Set command has been given */ |
| 474 |
if (saved_reg_value != UINT_MAX) { |
| 475 |
ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset, |
| 476 |
saved_reg_value); |
| 477 |
|
| 478 |
pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", |
| 479 |
saved_reg_type, saved_reg_offset, |
| 480 |
saved_reg_value); |
| 481 |
|
| 482 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 483 |
|
| 484 |
goto done; |
| 485 |
} |
| 486 |
/* Get command has been given */ |
| 487 |
ret = mwifiex_reg_read(priv, saved_reg_type, |
| 488 |
saved_reg_offset, ®_value); |
| 489 |
if (ret) { |
| 490 |
ret = -EINVAL; |
| 491 |
goto done; |
| 492 |
} |
| 493 |
|
| 494 |
pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type, |
| 495 |
saved_reg_offset, reg_value); |
| 496 |
|
| 497 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 498 |
|
| 499 |
done: |
| 500 |
free_page(addr); |
| 501 |
return ret; |
| 502 |
} |
| 503 |
|
| 504 |
/* Proc debug_mask file read handler. |
| 505 |
* This function is called when the 'debug_mask' file is opened for reading |
| 506 |
* This function can be used read driver debugging mask value. |
| 507 |
*/ |
| 508 |
static ssize_t |
| 509 |
mwifiex_debug_mask_read(struct file *file, char __user *ubuf, |
| 510 |
size_t count, loff_t *ppos) |
| 511 |
{ |
| 512 |
struct mwifiex_private *priv = |
| 513 |
(struct mwifiex_private *)file->private_data; |
| 514 |
unsigned long page = get_zeroed_page(GFP_KERNEL); |
| 515 |
char *buf = (char *)page; |
| 516 |
size_t ret = 0; |
| 517 |
int pos = 0; |
| 518 |
|
| 519 |
if (!buf) |
| 520 |
return -ENOMEM; |
| 521 |
|
| 522 |
pos += snprintf(buf, PAGE_SIZE, "debug mask=0x%08x\n", |
| 523 |
priv->adapter->debug_mask); |
| 524 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 525 |
|
| 526 |
free_page(page); |
| 527 |
return ret; |
| 528 |
} |
| 529 |
|
| 530 |
/* Proc debug_mask file read handler. |
| 531 |
* This function is called when the 'debug_mask' file is opened for reading |
| 532 |
* This function can be used read driver debugging mask value. |
| 533 |
*/ |
| 534 |
static ssize_t |
| 535 |
mwifiex_debug_mask_write(struct file *file, const char __user *ubuf, |
| 536 |
size_t count, loff_t *ppos) |
| 537 |
{ |
| 538 |
int ret; |
| 539 |
unsigned long debug_mask; |
| 540 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 541 |
char *buf; |
| 542 |
|
| 543 |
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); |
| 544 |
if (IS_ERR(buf)) |
| 545 |
return PTR_ERR(buf); |
| 546 |
|
| 547 |
if (kstrtoul(buf, 0, &debug_mask)) { |
| 548 |
ret = -EINVAL; |
| 549 |
goto done; |
| 550 |
} |
| 551 |
|
| 552 |
priv->adapter->debug_mask = debug_mask; |
| 553 |
ret = count; |
| 554 |
done: |
| 555 |
kfree(buf); |
| 556 |
return ret; |
| 557 |
} |
| 558 |
|
| 559 |
/* debugfs verext file write handler. |
| 560 |
* This function is called when the 'verext' file is opened for write |
| 561 |
*/ |
| 562 |
static ssize_t |
| 563 |
mwifiex_verext_write(struct file *file, const char __user *ubuf, |
| 564 |
size_t count, loff_t *ppos) |
| 565 |
{ |
| 566 |
int ret; |
| 567 |
u32 versionstrsel; |
| 568 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 569 |
|
| 570 |
ret = kstrtou32_from_user(ubuf, count, 10, &versionstrsel); |
| 571 |
if (ret) |
| 572 |
return ret; |
| 573 |
|
| 574 |
priv->versionstrsel = versionstrsel; |
| 575 |
|
| 576 |
return count; |
| 577 |
} |
| 578 |
|
| 579 |
/* Proc verext file read handler. |
| 580 |
* This function is called when the 'verext' file is opened for reading |
| 581 |
* This function can be used read driver exteneed verion string. |
| 582 |
*/ |
| 583 |
static ssize_t |
| 584 |
mwifiex_verext_read(struct file *file, char __user *ubuf, |
| 585 |
size_t count, loff_t *ppos) |
| 586 |
{ |
| 587 |
struct mwifiex_private *priv = |
| 588 |
(struct mwifiex_private *)file->private_data; |
| 589 |
char buf[256]; |
| 590 |
int ret; |
| 591 |
|
| 592 |
mwifiex_get_ver_ext(priv, priv->versionstrsel); |
| 593 |
ret = snprintf(buf, sizeof(buf), "version string: %s\n", |
| 594 |
priv->version_str); |
| 595 |
|
| 596 |
return simple_read_from_buffer(ubuf, count, ppos, buf, ret); |
| 597 |
} |
| 598 |
|
| 599 |
/* Proc memrw file write handler. |
| 600 |
* This function is called when the 'memrw' file is opened for writing |
| 601 |
* This function can be used to write to a memory location. |
| 602 |
*/ |
| 603 |
static ssize_t |
| 604 |
mwifiex_memrw_write(struct file *file, const char __user *ubuf, size_t count, |
| 605 |
loff_t *ppos) |
| 606 |
{ |
| 607 |
int ret; |
| 608 |
char cmd; |
| 609 |
struct mwifiex_ds_mem_rw mem_rw; |
| 610 |
u16 cmd_action; |
| 611 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 612 |
char *buf; |
| 613 |
|
| 614 |
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); |
| 615 |
if (IS_ERR(buf)) |
| 616 |
return PTR_ERR(buf); |
| 617 |
|
| 618 |
ret = sscanf(buf, "%c %x %x", &cmd, &mem_rw.addr, &mem_rw.value); |
| 619 |
if (ret != 3) { |
| 620 |
ret = -EINVAL; |
| 621 |
goto done; |
| 622 |
} |
| 623 |
|
| 624 |
if ((cmd == 'r') || (cmd == 'R')) { |
| 625 |
cmd_action = HostCmd_ACT_GEN_GET; |
| 626 |
mem_rw.value = 0; |
| 627 |
} else if ((cmd == 'w') || (cmd == 'W')) { |
| 628 |
cmd_action = HostCmd_ACT_GEN_SET; |
| 629 |
} else { |
| 630 |
ret = -EINVAL; |
| 631 |
goto done; |
| 632 |
} |
| 633 |
|
| 634 |
memcpy(&priv->mem_rw, &mem_rw, sizeof(mem_rw)); |
| 635 |
if (mwifiex_send_cmd(priv, HostCmd_CMD_MEM_ACCESS, cmd_action, 0, |
| 636 |
&mem_rw, true)) |
| 637 |
ret = -1; |
| 638 |
else |
| 639 |
ret = count; |
| 640 |
|
| 641 |
done: |
| 642 |
kfree(buf); |
| 643 |
return ret; |
| 644 |
} |
| 645 |
|
| 646 |
/* Proc memrw file read handler. |
| 647 |
* This function is called when the 'memrw' file is opened for reading |
| 648 |
* This function can be used to read from a memory location. |
| 649 |
*/ |
| 650 |
static ssize_t |
| 651 |
mwifiex_memrw_read(struct file *file, char __user *ubuf, |
| 652 |
size_t count, loff_t *ppos) |
| 653 |
{ |
| 654 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 655 |
unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| 656 |
char *buf = (char *)addr; |
| 657 |
int ret, pos = 0; |
| 658 |
|
| 659 |
if (!buf) |
| 660 |
return -ENOMEM; |
| 661 |
|
| 662 |
pos += snprintf(buf, PAGE_SIZE, "0x%x 0x%x\n", priv->mem_rw.addr, |
| 663 |
priv->mem_rw.value); |
| 664 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 665 |
|
| 666 |
free_page(addr); |
| 667 |
return ret; |
| 668 |
} |
| 669 |
|
| 670 |
static u32 saved_offset = -1, saved_bytes = -1; |
| 671 |
|
| 672 |
/* |
| 673 |
* Proc rdeeprom file write handler. |
| 674 |
* |
| 675 |
* This function is called when the 'rdeeprom' file is opened for writing |
| 676 |
* |
| 677 |
* This function can be used to write to a RDEEPROM location. |
| 678 |
*/ |
| 679 |
static ssize_t |
| 680 |
mwifiex_rdeeprom_write(struct file *file, |
| 681 |
const char __user *ubuf, size_t count, loff_t *ppos) |
| 682 |
{ |
| 683 |
char *buf; |
| 684 |
int ret = 0; |
| 685 |
int offset = -1, bytes = -1; |
| 686 |
|
| 687 |
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); |
| 688 |
if (IS_ERR(buf)) |
| 689 |
return PTR_ERR(buf); |
| 690 |
|
| 691 |
if (sscanf(buf, "%d %d", &offset, &bytes) != 2) { |
| 692 |
ret = -EINVAL; |
| 693 |
goto done; |
| 694 |
} |
| 695 |
|
| 696 |
if (offset == -1 || bytes == -1) { |
| 697 |
ret = -EINVAL; |
| 698 |
goto done; |
| 699 |
} else { |
| 700 |
saved_offset = offset; |
| 701 |
saved_bytes = bytes; |
| 702 |
ret = count; |
| 703 |
} |
| 704 |
done: |
| 705 |
kfree(buf); |
| 706 |
return ret; |
| 707 |
} |
| 708 |
|
| 709 |
/* |
| 710 |
* Proc rdeeprom read write handler. |
| 711 |
* |
| 712 |
* This function is called when the 'rdeeprom' file is opened for reading |
| 713 |
* |
| 714 |
* This function can be used to read from a RDEEPROM location. |
| 715 |
*/ |
| 716 |
static ssize_t |
| 717 |
mwifiex_rdeeprom_read(struct file *file, char __user *ubuf, |
| 718 |
size_t count, loff_t *ppos) |
| 719 |
{ |
| 720 |
struct mwifiex_private *priv = |
| 721 |
(struct mwifiex_private *) file->private_data; |
| 722 |
unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| 723 |
char *buf = (char *) addr; |
| 724 |
int pos, ret, i; |
| 725 |
u8 value[MAX_EEPROM_DATA]; |
| 726 |
|
| 727 |
if (!buf) |
| 728 |
return -ENOMEM; |
| 729 |
|
| 730 |
if (saved_offset == -1) { |
| 731 |
/* No command has been given */ |
| 732 |
pos = snprintf(buf, PAGE_SIZE, "0"); |
| 733 |
goto done; |
| 734 |
} |
| 735 |
|
| 736 |
/* Get command has been given */ |
| 737 |
ret = mwifiex_eeprom_read(priv, (u16) saved_offset, |
| 738 |
(u16) saved_bytes, value); |
| 739 |
if (ret) { |
| 740 |
ret = -EINVAL; |
| 741 |
goto out_free; |
| 742 |
} |
| 743 |
|
| 744 |
pos = snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes); |
| 745 |
|
| 746 |
for (i = 0; i < saved_bytes; i++) |
| 747 |
pos += scnprintf(buf + pos, PAGE_SIZE - pos, "%d ", value[i]); |
| 748 |
|
| 749 |
done: |
| 750 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 751 |
out_free: |
| 752 |
free_page(addr); |
| 753 |
return ret; |
| 754 |
} |
| 755 |
|
| 756 |
/* Proc hscfg file write handler |
| 757 |
* This function can be used to configure the host sleep parameters. |
| 758 |
*/ |
| 759 |
static ssize_t |
| 760 |
mwifiex_hscfg_write(struct file *file, const char __user *ubuf, |
| 761 |
size_t count, loff_t *ppos) |
| 762 |
{ |
| 763 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 764 |
char *buf; |
| 765 |
int ret, arg_num; |
| 766 |
struct mwifiex_ds_hs_cfg hscfg; |
| 767 |
int conditions = HS_CFG_COND_DEF; |
| 768 |
u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF; |
| 769 |
|
| 770 |
buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); |
| 771 |
if (IS_ERR(buf)) |
| 772 |
return PTR_ERR(buf); |
| 773 |
|
| 774 |
arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap); |
| 775 |
|
| 776 |
memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg)); |
| 777 |
|
| 778 |
if (arg_num > 3) { |
| 779 |
mwifiex_dbg(priv->adapter, ERROR, |
| 780 |
"Too many arguments\n"); |
| 781 |
ret = -EINVAL; |
| 782 |
goto done; |
| 783 |
} |
| 784 |
|
| 785 |
if (arg_num >= 1 && arg_num < 3) |
| 786 |
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, |
| 787 |
MWIFIEX_SYNC_CMD, &hscfg); |
| 788 |
|
| 789 |
if (arg_num) { |
| 790 |
if (conditions == HS_CFG_CANCEL) { |
| 791 |
mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD); |
| 792 |
ret = count; |
| 793 |
goto done; |
| 794 |
} |
| 795 |
hscfg.conditions = conditions; |
| 796 |
} |
| 797 |
if (arg_num >= 2) |
| 798 |
hscfg.gpio = gpio; |
| 799 |
if (arg_num == 3) |
| 800 |
hscfg.gap = gap; |
| 801 |
|
| 802 |
hscfg.is_invoke_hostcmd = false; |
| 803 |
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET, |
| 804 |
MWIFIEX_SYNC_CMD, &hscfg); |
| 805 |
|
| 806 |
mwifiex_enable_hs(priv->adapter); |
| 807 |
clear_bit(MWIFIEX_IS_HS_ENABLING, &priv->adapter->work_flags); |
| 808 |
ret = count; |
| 809 |
done: |
| 810 |
kfree(buf); |
| 811 |
return ret; |
| 812 |
} |
| 813 |
|
| 814 |
/* Proc hscfg file read handler |
| 815 |
* This function can be used to read host sleep configuration |
| 816 |
* parameters from driver. |
| 817 |
*/ |
| 818 |
static ssize_t |
| 819 |
mwifiex_hscfg_read(struct file *file, char __user *ubuf, |
| 820 |
size_t count, loff_t *ppos) |
| 821 |
{ |
| 822 |
struct mwifiex_private *priv = (void *)file->private_data; |
| 823 |
unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| 824 |
char *buf = (char *)addr; |
| 825 |
int pos, ret; |
| 826 |
struct mwifiex_ds_hs_cfg hscfg; |
| 827 |
|
| 828 |
if (!buf) |
| 829 |
return -ENOMEM; |
| 830 |
|
| 831 |
mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, |
| 832 |
MWIFIEX_SYNC_CMD, &hscfg); |
| 833 |
|
| 834 |
pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions, |
| 835 |
hscfg.gpio, hscfg.gap); |
| 836 |
|
| 837 |
ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| 838 |
|
| 839 |
free_page(addr); |
| 840 |
return ret; |
| 841 |
} |
| 842 |
|
| 843 |
static ssize_t |
| 844 |
mwifiex_timeshare_coex_read(struct file *file, char __user *ubuf, |
| 845 |
size_t count, loff_t *ppos) |
| 846 |
{ |
| 847 |
struct mwifiex_private *priv = file->private_data; |
| 848 |
char buf[3]; |
| 849 |
bool timeshare_coex; |
| 850 |
int ret; |
| 851 |
unsigned int len; |
| 852 |
|
| 853 |
if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) |
| 854 |
return -EOPNOTSUPP; |
| 855 |
|
| 856 |
ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, |
| 857 |
HostCmd_ACT_GEN_GET, 0, ×hare_coex, true); |
| 858 |
if (ret) |
| 859 |
return ret; |
| 860 |
|
| 861 |
len = sprintf(buf, "%d\n", timeshare_coex); |
| 862 |
return simple_read_from_buffer(ubuf, count, ppos, buf, len); |
| 863 |
} |
| 864 |
|
| 865 |
static ssize_t |
| 866 |
mwifiex_timeshare_coex_write(struct file *file, const char __user *ubuf, |
| 867 |
size_t count, loff_t *ppos) |
| 868 |
{ |
| 869 |
bool timeshare_coex; |
| 870 |
struct mwifiex_private *priv = file->private_data; |
| 871 |
int ret; |
| 872 |
|
| 873 |
if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) |
| 874 |
return -EOPNOTSUPP; |
| 875 |
|
| 876 |
ret = kstrtobool_from_user(ubuf, count, ×hare_coex); |
| 877 |
if (ret) |
| 878 |
return ret; |
| 879 |
|
| 880 |
ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, |
| 881 |
HostCmd_ACT_GEN_SET, 0, ×hare_coex, true); |
| 882 |
if (ret) |
| 883 |
return ret; |
| 884 |
else |
| 885 |
return count; |
| 886 |
} |
| 887 |
|
| 888 |
static ssize_t |
| 889 |
mwifiex_reset_write(struct file *file, |
| 890 |
const char __user *ubuf, size_t count, loff_t *ppos) |
| 891 |
{ |
| 892 |
struct mwifiex_private *priv = file->private_data; |
| 893 |
struct mwifiex_adapter *adapter = priv->adapter; |
| 894 |
bool result; |
| 895 |
int rc; |
| 896 |
|
| 897 |
rc = kstrtobool_from_user(ubuf, count, &result); |
| 898 |
if (rc) |
| 899 |
return rc; |
| 900 |
|
| 901 |
if (!result) |
| 902 |
return -EINVAL; |
| 903 |
|
| 904 |
if (adapter->if_ops.card_reset) { |
| 905 |
dev_info(adapter->dev, "Resetting per request\n"); |
| 906 |
adapter->if_ops.card_reset(adapter); |
| 907 |
} |
| 908 |
|
| 909 |
return count; |
| 910 |
} |
| 911 |
|
| 912 |
#define MWIFIEX_DFS_ADD_FILE(name) do { \ |
| 913 |
debugfs_create_file(#name, 0644, priv->dfs_dev_dir, priv, \ |
| 914 |
&mwifiex_dfs_##name##_fops); \ |
| 915 |
} while (0); |
| 916 |
|
| 917 |
#define MWIFIEX_DFS_FILE_OPS(name) \ |
| 918 |
static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| 919 |
.read = mwifiex_##name##_read, \ |
| 920 |
.write = mwifiex_##name##_write, \ |
| 921 |
.open = simple_open, \ |
| 922 |
}; |
| 923 |
|
| 924 |
#define MWIFIEX_DFS_FILE_READ_OPS(name) \ |
| 925 |
static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| 926 |
.read = mwifiex_##name##_read, \ |
| 927 |
.open = simple_open, \ |
| 928 |
}; |
| 929 |
|
| 930 |
#define MWIFIEX_DFS_FILE_WRITE_OPS(name) \ |
| 931 |
static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| 932 |
.write = mwifiex_##name##_write, \ |
| 933 |
.open = simple_open, \ |
| 934 |
}; |
| 935 |
|
| 936 |
|
| 937 |
MWIFIEX_DFS_FILE_READ_OPS(info); |
| 938 |
MWIFIEX_DFS_FILE_READ_OPS(debug); |
| 939 |
MWIFIEX_DFS_FILE_READ_OPS(getlog); |
| 940 |
MWIFIEX_DFS_FILE_OPS(regrdwr); |
| 941 |
MWIFIEX_DFS_FILE_OPS(rdeeprom); |
| 942 |
MWIFIEX_DFS_FILE_OPS(memrw); |
| 943 |
MWIFIEX_DFS_FILE_OPS(hscfg); |
| 944 |
MWIFIEX_DFS_FILE_OPS(histogram); |
| 945 |
MWIFIEX_DFS_FILE_OPS(debug_mask); |
| 946 |
MWIFIEX_DFS_FILE_OPS(timeshare_coex); |
| 947 |
MWIFIEX_DFS_FILE_WRITE_OPS(reset); |
| 948 |
MWIFIEX_DFS_FILE_OPS(verext); |
| 949 |
|
| 950 |
/* |
| 951 |
* This function creates the debug FS directory structure and the files. |
| 952 |
*/ |
| 953 |
void |
| 954 |
mwifiex_dev_debugfs_init(struct mwifiex_private *priv) |
| 955 |
{ |
| 956 |
if (!mwifiex_dfs_dir || !priv) |
| 957 |
return; |
| 958 |
|
| 959 |
priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name, |
| 960 |
mwifiex_dfs_dir); |
| 961 |
|
| 962 |
MWIFIEX_DFS_ADD_FILE(info); |
| 963 |
MWIFIEX_DFS_ADD_FILE(debug); |
| 964 |
MWIFIEX_DFS_ADD_FILE(getlog); |
| 965 |
MWIFIEX_DFS_ADD_FILE(regrdwr); |
| 966 |
MWIFIEX_DFS_ADD_FILE(rdeeprom); |
| 967 |
|
| 968 |
MWIFIEX_DFS_ADD_FILE(memrw); |
| 969 |
MWIFIEX_DFS_ADD_FILE(hscfg); |
| 970 |
MWIFIEX_DFS_ADD_FILE(histogram); |
| 971 |
MWIFIEX_DFS_ADD_FILE(debug_mask); |
| 972 |
MWIFIEX_DFS_ADD_FILE(timeshare_coex); |
| 973 |
MWIFIEX_DFS_ADD_FILE(reset); |
| 974 |
MWIFIEX_DFS_ADD_FILE(verext); |
| 975 |
} |
| 976 |
|
| 977 |
/* |
| 978 |
* This function removes the debug FS directory structure and the files. |
| 979 |
*/ |
| 980 |
void |
| 981 |
mwifiex_dev_debugfs_remove(struct mwifiex_private *priv) |
| 982 |
{ |
| 983 |
if (!priv) |
| 984 |
return; |
| 985 |
|
| 986 |
debugfs_remove_recursive(priv->dfs_dev_dir); |
| 987 |
} |
| 988 |
|
| 989 |
/* |
| 990 |
* This function creates the top level proc directory. |
| 991 |
*/ |
| 992 |
void |
| 993 |
mwifiex_debugfs_init(void) |
| 994 |
{ |
| 995 |
if (!mwifiex_dfs_dir) |
| 996 |
mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL); |
| 997 |
} |
| 998 |
|
| 999 |
/* |
| 1000 |
* This function removes the top level proc directory. |
| 1001 |
*/ |
| 1002 |
void |
| 1003 |
mwifiex_debugfs_remove(void) |
| 1004 |
{ |
| 1005 |
debugfs_remove(mwifiex_dfs_dir); |
| 1006 |
} |