| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* NXP Wireless LAN device driver: association and ad-hoc start/join |
| 4 |
* |
| 5 |
* Copyright 2011-2020 NXP |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "decl.h" |
| 9 |
#include "ioctl.h" |
| 10 |
#include "util.h" |
| 11 |
#include "fw.h" |
| 12 |
#include "main.h" |
| 13 |
#include "wmm.h" |
| 14 |
#include "11n.h" |
| 15 |
#include "11ac.h" |
| 16 |
|
| 17 |
#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9))) |
| 18 |
|
| 19 |
/* |
| 20 |
* Append a generic IE as a pass through TLV to a TLV buffer. |
| 21 |
* |
| 22 |
* This function is called from the network join command preparation routine. |
| 23 |
* |
| 24 |
* If the IE buffer has been setup by the application, this routine appends |
| 25 |
* the buffer as a pass through TLV type to the request. |
| 26 |
*/ |
| 27 |
static int |
| 28 |
mwifiex_cmd_append_generic_ie(struct mwifiex_private *priv, u8 **buffer) |
| 29 |
{ |
| 30 |
int ret_len = 0; |
| 31 |
struct mwifiex_ie_types_header ie_header; |
| 32 |
|
| 33 |
/* Null Checks */ |
| 34 |
if (!buffer) |
| 35 |
return 0; |
| 36 |
if (!(*buffer)) |
| 37 |
return 0; |
| 38 |
|
| 39 |
/* |
| 40 |
* If there is a generic ie buffer setup, append it to the return |
| 41 |
* parameter buffer pointer. |
| 42 |
*/ |
| 43 |
if (priv->gen_ie_buf_len) { |
| 44 |
mwifiex_dbg(priv->adapter, INFO, |
| 45 |
"info: %s: append generic ie len %d to %p\n", |
| 46 |
__func__, priv->gen_ie_buf_len, *buffer); |
| 47 |
|
| 48 |
/* Wrap the generic IE buffer with a pass through TLV type */ |
| 49 |
ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); |
| 50 |
ie_header.len = cpu_to_le16(priv->gen_ie_buf_len); |
| 51 |
memcpy(*buffer, &ie_header, sizeof(ie_header)); |
| 52 |
|
| 53 |
/* Increment the return size and the return buffer pointer |
| 54 |
param */ |
| 55 |
*buffer += sizeof(ie_header); |
| 56 |
ret_len += sizeof(ie_header); |
| 57 |
|
| 58 |
/* Copy the generic IE buffer to the output buffer, advance |
| 59 |
pointer */ |
| 60 |
memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len); |
| 61 |
|
| 62 |
/* Increment the return size and the return buffer pointer |
| 63 |
param */ |
| 64 |
*buffer += priv->gen_ie_buf_len; |
| 65 |
ret_len += priv->gen_ie_buf_len; |
| 66 |
|
| 67 |
/* Reset the generic IE buffer */ |
| 68 |
priv->gen_ie_buf_len = 0; |
| 69 |
} |
| 70 |
|
| 71 |
/* return the length appended to the buffer */ |
| 72 |
return ret_len; |
| 73 |
} |
| 74 |
|
| 75 |
/* |
| 76 |
* Append TSF tracking info from the scan table for the target AP. |
| 77 |
* |
| 78 |
* This function is called from the network join command preparation routine. |
| 79 |
* |
| 80 |
* The TSF table TSF sent to the firmware contains two TSF values: |
| 81 |
* - The TSF of the target AP from its previous beacon/probe response |
| 82 |
* - The TSF timestamp of our local MAC at the time we observed the |
| 83 |
* beacon/probe response. |
| 84 |
* |
| 85 |
* The firmware uses the timestamp values to set an initial TSF value |
| 86 |
* in the MAC for the new association after a reassociation attempt. |
| 87 |
*/ |
| 88 |
static int |
| 89 |
mwifiex_cmd_append_tsf_tlv(struct mwifiex_private *priv, u8 **buffer, |
| 90 |
struct mwifiex_bssdescriptor *bss_desc) |
| 91 |
{ |
| 92 |
struct mwifiex_ie_types_tsf_timestamp tsf_tlv; |
| 93 |
__le64 tsf_val; |
| 94 |
|
| 95 |
/* Null Checks */ |
| 96 |
if (buffer == NULL) |
| 97 |
return 0; |
| 98 |
if (*buffer == NULL) |
| 99 |
return 0; |
| 100 |
|
| 101 |
memset(&tsf_tlv, 0x00, sizeof(struct mwifiex_ie_types_tsf_timestamp)); |
| 102 |
|
| 103 |
tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP); |
| 104 |
tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val)); |
| 105 |
|
| 106 |
memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header)); |
| 107 |
*buffer += sizeof(tsf_tlv.header); |
| 108 |
|
| 109 |
/* TSF at the time when beacon/probe_response was received */ |
| 110 |
tsf_val = cpu_to_le64(bss_desc->fw_tsf); |
| 111 |
memcpy(*buffer, &tsf_val, sizeof(tsf_val)); |
| 112 |
*buffer += sizeof(tsf_val); |
| 113 |
|
| 114 |
tsf_val = cpu_to_le64(bss_desc->timestamp); |
| 115 |
|
| 116 |
mwifiex_dbg(priv->adapter, INFO, |
| 117 |
"info: %s: TSF offset calc: %016llx - %016llx\n", |
| 118 |
__func__, bss_desc->timestamp, bss_desc->fw_tsf); |
| 119 |
|
| 120 |
memcpy(*buffer, &tsf_val, sizeof(tsf_val)); |
| 121 |
*buffer += sizeof(tsf_val); |
| 122 |
|
| 123 |
return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val)); |
| 124 |
} |
| 125 |
|
| 126 |
/* |
| 127 |
* This function finds out the common rates between rate1 and rate2. |
| 128 |
* |
| 129 |
* It will fill common rates in rate1 as output if found. |
| 130 |
* |
| 131 |
* NOTE: Setting the MSB of the basic rates needs to be taken |
| 132 |
* care of, either before or after calling this function. |
| 133 |
*/ |
| 134 |
static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1, |
| 135 |
u32 rate1_size, u8 *rate2, u32 rate2_size) |
| 136 |
{ |
| 137 |
int ret; |
| 138 |
u8 *ptr = rate1, *tmp; |
| 139 |
u32 i, j; |
| 140 |
|
| 141 |
tmp = kmemdup(rate1, rate1_size, GFP_KERNEL); |
| 142 |
if (!tmp) { |
| 143 |
mwifiex_dbg(priv->adapter, ERROR, "failed to alloc tmp buf\n"); |
| 144 |
return -ENOMEM; |
| 145 |
} |
| 146 |
|
| 147 |
memset(rate1, 0, rate1_size); |
| 148 |
|
| 149 |
for (i = 0; i < rate2_size && rate2[i]; i++) { |
| 150 |
for (j = 0; j < rate1_size && tmp[j]; j++) { |
| 151 |
/* Check common rate, excluding the bit for |
| 152 |
basic rate */ |
| 153 |
if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) { |
| 154 |
*rate1++ = tmp[j]; |
| 155 |
break; |
| 156 |
} |
| 157 |
} |
| 158 |
} |
| 159 |
|
| 160 |
mwifiex_dbg(priv->adapter, INFO, "info: Tx data rate set to %#x\n", |
| 161 |
priv->data_rate); |
| 162 |
|
| 163 |
if (!priv->is_data_rate_auto) { |
| 164 |
while (*ptr) { |
| 165 |
if ((*ptr & 0x7f) == priv->data_rate) { |
| 166 |
ret = 0; |
| 167 |
goto done; |
| 168 |
} |
| 169 |
ptr++; |
| 170 |
} |
| 171 |
mwifiex_dbg(priv->adapter, ERROR, |
| 172 |
"previously set fixed data rate %#x\t" |
| 173 |
"is not compatible with the network\n", |
| 174 |
priv->data_rate); |
| 175 |
|
| 176 |
ret = -1; |
| 177 |
goto done; |
| 178 |
} |
| 179 |
|
| 180 |
ret = 0; |
| 181 |
done: |
| 182 |
kfree(tmp); |
| 183 |
return ret; |
| 184 |
} |
| 185 |
|
| 186 |
/* |
| 187 |
* This function creates the intersection of the rates supported by a |
| 188 |
* target BSS and our adapter settings for use in an assoc/join command. |
| 189 |
*/ |
| 190 |
static int |
| 191 |
mwifiex_setup_rates_from_bssdesc(struct mwifiex_private *priv, |
| 192 |
struct mwifiex_bssdescriptor *bss_desc, |
| 193 |
u8 *out_rates, u32 *out_rates_size) |
| 194 |
{ |
| 195 |
u8 card_rates[MWIFIEX_SUPPORTED_RATES]; |
| 196 |
u32 card_rates_size; |
| 197 |
|
| 198 |
/* Copy AP supported rates */ |
| 199 |
memcpy(out_rates, bss_desc->supported_rates, MWIFIEX_SUPPORTED_RATES); |
| 200 |
/* Get the STA supported rates */ |
| 201 |
card_rates_size = mwifiex_get_active_data_rates(priv, card_rates); |
| 202 |
/* Get the common rates between AP and STA supported rates */ |
| 203 |
if (mwifiex_get_common_rates(priv, out_rates, MWIFIEX_SUPPORTED_RATES, |
| 204 |
card_rates, card_rates_size)) { |
| 205 |
*out_rates_size = 0; |
| 206 |
mwifiex_dbg(priv->adapter, ERROR, |
| 207 |
"%s: cannot get common rates\n", |
| 208 |
__func__); |
| 209 |
return -1; |
| 210 |
} |
| 211 |
|
| 212 |
*out_rates_size = |
| 213 |
min_t(size_t, strlen(out_rates), MWIFIEX_SUPPORTED_RATES); |
| 214 |
|
| 215 |
return 0; |
| 216 |
} |
| 217 |
|
| 218 |
/* |
| 219 |
* This function appends a WPS IE. It is called from the network join command |
| 220 |
* preparation routine. |
| 221 |
* |
| 222 |
* If the IE buffer has been setup by the application, this routine appends |
| 223 |
* the buffer as a WPS TLV type to the request. |
| 224 |
*/ |
| 225 |
static int |
| 226 |
mwifiex_cmd_append_wps_ie(struct mwifiex_private *priv, u8 **buffer) |
| 227 |
{ |
| 228 |
int retLen = 0; |
| 229 |
struct mwifiex_ie_types_header ie_header; |
| 230 |
|
| 231 |
if (!buffer || !*buffer) |
| 232 |
return 0; |
| 233 |
|
| 234 |
/* |
| 235 |
* If there is a wps ie buffer setup, append it to the return |
| 236 |
* parameter buffer pointer. |
| 237 |
*/ |
| 238 |
if (priv->wps_ie_len) { |
| 239 |
mwifiex_dbg(priv->adapter, CMD, |
| 240 |
"cmd: append wps ie %d to %p\n", |
| 241 |
priv->wps_ie_len, *buffer); |
| 242 |
|
| 243 |
/* Wrap the generic IE buffer with a pass through TLV type */ |
| 244 |
ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); |
| 245 |
ie_header.len = cpu_to_le16(priv->wps_ie_len); |
| 246 |
memcpy(*buffer, &ie_header, sizeof(ie_header)); |
| 247 |
*buffer += sizeof(ie_header); |
| 248 |
retLen += sizeof(ie_header); |
| 249 |
|
| 250 |
memcpy(*buffer, priv->wps_ie, priv->wps_ie_len); |
| 251 |
*buffer += priv->wps_ie_len; |
| 252 |
retLen += priv->wps_ie_len; |
| 253 |
|
| 254 |
} |
| 255 |
|
| 256 |
kfree(priv->wps_ie); |
| 257 |
priv->wps_ie_len = 0; |
| 258 |
return retLen; |
| 259 |
} |
| 260 |
|
| 261 |
/* |
| 262 |
* This function appends a WAPI IE. |
| 263 |
* |
| 264 |
* This function is called from the network join command preparation routine. |
| 265 |
* |
| 266 |
* If the IE buffer has been setup by the application, this routine appends |
| 267 |
* the buffer as a WAPI TLV type to the request. |
| 268 |
*/ |
| 269 |
static int |
| 270 |
mwifiex_cmd_append_wapi_ie(struct mwifiex_private *priv, u8 **buffer) |
| 271 |
{ |
| 272 |
int retLen = 0; |
| 273 |
struct mwifiex_ie_types_header ie_header; |
| 274 |
|
| 275 |
/* Null Checks */ |
| 276 |
if (buffer == NULL) |
| 277 |
return 0; |
| 278 |
if (*buffer == NULL) |
| 279 |
return 0; |
| 280 |
|
| 281 |
/* |
| 282 |
* If there is a wapi ie buffer setup, append it to the return |
| 283 |
* parameter buffer pointer. |
| 284 |
*/ |
| 285 |
if (priv->wapi_ie_len) { |
| 286 |
mwifiex_dbg(priv->adapter, CMD, |
| 287 |
"cmd: append wapi ie %d to %p\n", |
| 288 |
priv->wapi_ie_len, *buffer); |
| 289 |
|
| 290 |
/* Wrap the generic IE buffer with a pass through TLV type */ |
| 291 |
ie_header.type = cpu_to_le16(TLV_TYPE_WAPI_IE); |
| 292 |
ie_header.len = cpu_to_le16(priv->wapi_ie_len); |
| 293 |
memcpy(*buffer, &ie_header, sizeof(ie_header)); |
| 294 |
|
| 295 |
/* Increment the return size and the return buffer pointer |
| 296 |
param */ |
| 297 |
*buffer += sizeof(ie_header); |
| 298 |
retLen += sizeof(ie_header); |
| 299 |
|
| 300 |
/* Copy the wapi IE buffer to the output buffer, advance |
| 301 |
pointer */ |
| 302 |
memcpy(*buffer, priv->wapi_ie, priv->wapi_ie_len); |
| 303 |
|
| 304 |
/* Increment the return size and the return buffer pointer |
| 305 |
param */ |
| 306 |
*buffer += priv->wapi_ie_len; |
| 307 |
retLen += priv->wapi_ie_len; |
| 308 |
|
| 309 |
} |
| 310 |
/* return the length appended to the buffer */ |
| 311 |
return retLen; |
| 312 |
} |
| 313 |
|
| 314 |
/* |
| 315 |
* This function appends rsn ie tlv for wpa/wpa2 security modes. |
| 316 |
* It is called from the network join command preparation routine. |
| 317 |
*/ |
| 318 |
static int mwifiex_append_rsn_ie_wpa_wpa2(struct mwifiex_private *priv, |
| 319 |
u8 **buffer) |
| 320 |
{ |
| 321 |
struct mwifiex_ie_types_rsn_param_set *rsn_ie_tlv; |
| 322 |
int rsn_ie_len; |
| 323 |
|
| 324 |
if (!buffer || !(*buffer)) |
| 325 |
return 0; |
| 326 |
|
| 327 |
rsn_ie_tlv = (struct mwifiex_ie_types_rsn_param_set *) (*buffer); |
| 328 |
rsn_ie_tlv->header.type = cpu_to_le16((u16) priv->wpa_ie[0]); |
| 329 |
rsn_ie_tlv->header.type = cpu_to_le16( |
| 330 |
le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF); |
| 331 |
rsn_ie_tlv->header.len = cpu_to_le16((u16) priv->wpa_ie[1]); |
| 332 |
rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len) |
| 333 |
& 0x00FF); |
| 334 |
if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2)) |
| 335 |
memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2], |
| 336 |
le16_to_cpu(rsn_ie_tlv->header.len)); |
| 337 |
else |
| 338 |
return -1; |
| 339 |
|
| 340 |
rsn_ie_len = sizeof(rsn_ie_tlv->header) + |
| 341 |
le16_to_cpu(rsn_ie_tlv->header.len); |
| 342 |
*buffer += rsn_ie_len; |
| 343 |
|
| 344 |
return rsn_ie_len; |
| 345 |
} |
| 346 |
|
| 347 |
/* |
| 348 |
* This function prepares command for association. |
| 349 |
* |
| 350 |
* This sets the following parameters - |
| 351 |
* - Peer MAC address |
| 352 |
* - Listen interval |
| 353 |
* - Beacon interval |
| 354 |
* - Capability information |
| 355 |
* |
| 356 |
* ...and the following TLVs, as required - |
| 357 |
* - SSID TLV |
| 358 |
* - PHY TLV |
| 359 |
* - SS TLV |
| 360 |
* - Rates TLV |
| 361 |
* - Authentication TLV |
| 362 |
* - Channel TLV |
| 363 |
* - WPA/WPA2 IE |
| 364 |
* - 11n TLV |
| 365 |
* - Vendor specific TLV |
| 366 |
* - WMM TLV |
| 367 |
* - WAPI IE |
| 368 |
* - Generic IE |
| 369 |
* - TSF TLV |
| 370 |
* |
| 371 |
* Preparation also includes - |
| 372 |
* - Setting command ID and proper size |
| 373 |
* - Ensuring correct endian-ness |
| 374 |
*/ |
| 375 |
int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, |
| 376 |
struct host_cmd_ds_command *cmd, |
| 377 |
struct mwifiex_bssdescriptor *bss_desc) |
| 378 |
{ |
| 379 |
struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate; |
| 380 |
struct mwifiex_ie_types_ssid_param_set *ssid_tlv; |
| 381 |
struct mwifiex_ie_types_phy_param_set *phy_tlv; |
| 382 |
struct mwifiex_ie_types_ss_param_set *ss_tlv; |
| 383 |
struct mwifiex_ie_types_rates_param_set *rates_tlv; |
| 384 |
struct mwifiex_ie_types_auth_type *auth_tlv; |
| 385 |
struct mwifiex_ie_types_sae_pwe_mode *sae_pwe_tlv; |
| 386 |
struct mwifiex_ie_types_chan_list_param_set *chan_tlv; |
| 387 |
struct mwifiex_ie_types_host_mlme *host_mlme_tlv; |
| 388 |
u8 rates[MWIFIEX_SUPPORTED_RATES]; |
| 389 |
u32 rates_size; |
| 390 |
u16 tmp_cap; |
| 391 |
u8 *pos; |
| 392 |
int rsn_ie_len = 0; |
| 393 |
|
| 394 |
pos = (u8 *) assoc; |
| 395 |
|
| 396 |
cmd->command = cpu_to_le16(HostCmd_CMD_802_11_ASSOCIATE); |
| 397 |
|
| 398 |
/* Save so we know which BSS Desc to use in the response handler */ |
| 399 |
priv->attempted_bss_desc = bss_desc; |
| 400 |
|
| 401 |
memcpy(assoc->peer_sta_addr, |
| 402 |
bss_desc->mac_address, sizeof(assoc->peer_sta_addr)); |
| 403 |
pos += sizeof(assoc->peer_sta_addr); |
| 404 |
|
| 405 |
/* Set the listen interval */ |
| 406 |
assoc->listen_interval = cpu_to_le16(priv->listen_interval); |
| 407 |
/* Set the beacon period */ |
| 408 |
assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period); |
| 409 |
|
| 410 |
pos += sizeof(assoc->cap_info_bitmap); |
| 411 |
pos += sizeof(assoc->listen_interval); |
| 412 |
pos += sizeof(assoc->beacon_period); |
| 413 |
pos += sizeof(assoc->dtim_period); |
| 414 |
|
| 415 |
ssid_tlv = (struct mwifiex_ie_types_ssid_param_set *) pos; |
| 416 |
ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID); |
| 417 |
ssid_tlv->header.len = cpu_to_le16((u16) bss_desc->ssid.ssid_len); |
| 418 |
memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid, |
| 419 |
le16_to_cpu(ssid_tlv->header.len)); |
| 420 |
pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len); |
| 421 |
|
| 422 |
phy_tlv = (struct mwifiex_ie_types_phy_param_set *) pos; |
| 423 |
phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS); |
| 424 |
phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set)); |
| 425 |
memcpy(&phy_tlv->fh_ds.ds_param_set, |
| 426 |
&bss_desc->phy_param_set.ds_param_set.current_chan, |
| 427 |
sizeof(phy_tlv->fh_ds.ds_param_set)); |
| 428 |
pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len); |
| 429 |
|
| 430 |
ss_tlv = (struct mwifiex_ie_types_ss_param_set *) pos; |
| 431 |
ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS); |
| 432 |
ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set)); |
| 433 |
pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len); |
| 434 |
|
| 435 |
/* Get the common rates supported between the driver and the BSS Desc */ |
| 436 |
if (mwifiex_setup_rates_from_bssdesc |
| 437 |
(priv, bss_desc, rates, &rates_size)) |
| 438 |
return -1; |
| 439 |
|
| 440 |
/* Save the data rates into Current BSS state structure */ |
| 441 |
priv->curr_bss_params.num_of_rates = rates_size; |
| 442 |
memcpy(&priv->curr_bss_params.data_rates, rates, rates_size); |
| 443 |
|
| 444 |
/* Setup the Rates TLV in the association command */ |
| 445 |
rates_tlv = (struct mwifiex_ie_types_rates_param_set *) pos; |
| 446 |
rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); |
| 447 |
rates_tlv->header.len = cpu_to_le16((u16) rates_size); |
| 448 |
memcpy(rates_tlv->rates, rates, rates_size); |
| 449 |
pos += sizeof(rates_tlv->header) + rates_size; |
| 450 |
mwifiex_dbg(priv->adapter, INFO, "info: ASSOC_CMD: rates size = %d\n", |
| 451 |
rates_size); |
| 452 |
|
| 453 |
/* Add the Authentication type to be used for Auth frames */ |
| 454 |
auth_tlv = (struct mwifiex_ie_types_auth_type *) pos; |
| 455 |
auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); |
| 456 |
auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type)); |
| 457 |
if (priv->sec_info.wep_enabled) |
| 458 |
auth_tlv->auth_type = cpu_to_le16( |
| 459 |
(u16) priv->sec_info.authentication_mode); |
| 460 |
else |
| 461 |
auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM); |
| 462 |
|
| 463 |
pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len); |
| 464 |
|
| 465 |
if (priv->sec_info.authentication_mode == WLAN_AUTH_SAE) { |
| 466 |
auth_tlv->auth_type = cpu_to_le16(MWIFIEX_AUTHTYPE_SAE); |
| 467 |
if (bss_desc->bcn_rsnx_ie && |
| 468 |
bss_desc->bcn_rsnx_ie->ieee_hdr.len && |
| 469 |
(bss_desc->bcn_rsnx_ie->data[0] & |
| 470 |
WLAN_RSNX_CAPA_SAE_H2E)) { |
| 471 |
sae_pwe_tlv = |
| 472 |
(struct mwifiex_ie_types_sae_pwe_mode *)pos; |
| 473 |
sae_pwe_tlv->header.type = |
| 474 |
cpu_to_le16(TLV_TYPE_SAE_PWE_MODE); |
| 475 |
sae_pwe_tlv->header.len = |
| 476 |
cpu_to_le16(sizeof(sae_pwe_tlv->pwe[0])); |
| 477 |
sae_pwe_tlv->pwe[0] = bss_desc->bcn_rsnx_ie->data[0]; |
| 478 |
pos += sizeof(sae_pwe_tlv->header) + |
| 479 |
sizeof(sae_pwe_tlv->pwe[0]); |
| 480 |
} |
| 481 |
} |
| 482 |
|
| 483 |
if (IS_SUPPORT_MULTI_BANDS(priv->adapter) && |
| 484 |
!(ISSUPP_11NENABLED(priv->adapter->fw_cap_info) && |
| 485 |
(!bss_desc->disable_11n) && |
| 486 |
(priv->adapter->config_bands & BAND_GN || |
| 487 |
priv->adapter->config_bands & BAND_AN) && |
| 488 |
(bss_desc->bcn_ht_cap) |
| 489 |
) |
| 490 |
) { |
| 491 |
/* Append a channel TLV for the channel the attempted AP was |
| 492 |
found on */ |
| 493 |
chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; |
| 494 |
chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| 495 |
chan_tlv->header.len = |
| 496 |
cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); |
| 497 |
|
| 498 |
memset(chan_tlv->chan_scan_param, 0x00, |
| 499 |
sizeof(struct mwifiex_chan_scan_param_set)); |
| 500 |
chan_tlv->chan_scan_param[0].chan_number = |
| 501 |
(bss_desc->phy_param_set.ds_param_set.current_chan); |
| 502 |
mwifiex_dbg(priv->adapter, INFO, "info: Assoc: TLV Chan = %d\n", |
| 503 |
chan_tlv->chan_scan_param[0].chan_number); |
| 504 |
|
| 505 |
chan_tlv->chan_scan_param[0].radio_type = |
| 506 |
mwifiex_band_to_radio_type((u8) bss_desc->bss_band); |
| 507 |
|
| 508 |
mwifiex_dbg(priv->adapter, INFO, "info: Assoc: TLV Band = %d\n", |
| 509 |
chan_tlv->chan_scan_param[0].radio_type); |
| 510 |
pos += sizeof(chan_tlv->header) + |
| 511 |
sizeof(struct mwifiex_chan_scan_param_set); |
| 512 |
} |
| 513 |
|
| 514 |
if (priv->adapter->host_mlme_enabled) { |
| 515 |
host_mlme_tlv = (struct mwifiex_ie_types_host_mlme *)pos; |
| 516 |
host_mlme_tlv->header.type = cpu_to_le16(TLV_TYPE_HOST_MLME); |
| 517 |
host_mlme_tlv->header.len = |
| 518 |
cpu_to_le16(sizeof(host_mlme_tlv->host_mlme)); |
| 519 |
host_mlme_tlv->host_mlme = 1; |
| 520 |
pos += sizeof(host_mlme_tlv->header) + |
| 521 |
sizeof(host_mlme_tlv->host_mlme); |
| 522 |
} |
| 523 |
|
| 524 |
if (!priv->wps.session_enable) { |
| 525 |
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) |
| 526 |
rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); |
| 527 |
|
| 528 |
if (rsn_ie_len == -1) |
| 529 |
return -1; |
| 530 |
} |
| 531 |
|
| 532 |
if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) && |
| 533 |
(!bss_desc->disable_11n) && |
| 534 |
(priv->adapter->config_bands & BAND_GN || |
| 535 |
priv->adapter->config_bands & BAND_AN)) |
| 536 |
mwifiex_cmd_append_11n_tlv(priv, bss_desc, &pos); |
| 537 |
|
| 538 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && |
| 539 |
!bss_desc->disable_11n && !bss_desc->disable_11ac && |
| 540 |
priv->adapter->config_bands & BAND_AAC) |
| 541 |
mwifiex_cmd_append_11ac_tlv(priv, bss_desc, &pos); |
| 542 |
|
| 543 |
/* Append vendor specific IE TLV */ |
| 544 |
mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_ASSOC, &pos); |
| 545 |
|
| 546 |
mwifiex_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie, |
| 547 |
bss_desc->bcn_ht_cap); |
| 548 |
if (priv->sec_info.wapi_enabled && priv->wapi_ie_len) |
| 549 |
mwifiex_cmd_append_wapi_ie(priv, &pos); |
| 550 |
|
| 551 |
if (priv->wps.session_enable && priv->wps_ie_len) |
| 552 |
mwifiex_cmd_append_wps_ie(priv, &pos); |
| 553 |
|
| 554 |
mwifiex_cmd_append_generic_ie(priv, &pos); |
| 555 |
|
| 556 |
mwifiex_cmd_append_tsf_tlv(priv, &pos, bss_desc); |
| 557 |
|
| 558 |
mwifiex_11h_process_join(priv, &pos, bss_desc); |
| 559 |
|
| 560 |
cmd->size = cpu_to_le16((u16) (pos - (u8 *) assoc) + S_DS_GEN); |
| 561 |
|
| 562 |
/* Set the Capability info at last */ |
| 563 |
tmp_cap = bss_desc->cap_info_bitmap; |
| 564 |
|
| 565 |
if (priv->adapter->config_bands == BAND_B) |
| 566 |
tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| 567 |
|
| 568 |
tmp_cap &= CAPINFO_MASK; |
| 569 |
mwifiex_dbg(priv->adapter, INFO, |
| 570 |
"info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n", |
| 571 |
tmp_cap, CAPINFO_MASK); |
| 572 |
assoc->cap_info_bitmap = cpu_to_le16(tmp_cap); |
| 573 |
|
| 574 |
return 0; |
| 575 |
} |
| 576 |
|
| 577 |
static const char *assoc_failure_reason_to_str(u16 cap_info) |
| 578 |
{ |
| 579 |
switch (cap_info) { |
| 580 |
case CONNECT_ERR_AUTH_ERR_STA_FAILURE: |
| 581 |
return "CONNECT_ERR_AUTH_ERR_STA_FAILURE"; |
| 582 |
case CONNECT_ERR_AUTH_MSG_UNHANDLED: |
| 583 |
return "CONNECT_ERR_AUTH_MSG_UNHANDLED"; |
| 584 |
case CONNECT_ERR_ASSOC_ERR_TIMEOUT: |
| 585 |
return "CONNECT_ERR_ASSOC_ERR_TIMEOUT"; |
| 586 |
case CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED: |
| 587 |
return "CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED"; |
| 588 |
case CONNECT_ERR_STA_FAILURE: |
| 589 |
return "CONNECT_ERR_STA_FAILURE"; |
| 590 |
} |
| 591 |
|
| 592 |
return "Unknown connect failure"; |
| 593 |
} |
| 594 |
/* |
| 595 |
* Association firmware command response handler |
| 596 |
* |
| 597 |
* The response buffer for the association command has the following |
| 598 |
* memory layout. |
| 599 |
* |
| 600 |
* For cases where an association response was not received (indicated |
| 601 |
* by the CapInfo and AId field): |
| 602 |
* |
| 603 |
* .------------------------------------------------------------. |
| 604 |
* | Header(4 * sizeof(t_u16)): Standard command response hdr | |
| 605 |
* .------------------------------------------------------------. |
| 606 |
* | cap_info/Error Return(t_u16): | |
| 607 |
* | 0xFFFF(-1): Internal error | |
| 608 |
* | 0xFFFE(-2): Authentication unhandled message | |
| 609 |
* | 0xFFFD(-3): Authentication refused | |
| 610 |
* | 0xFFFC(-4): Timeout waiting for AP response | |
| 611 |
* .------------------------------------------------------------. |
| 612 |
* | status_code(t_u16): | |
| 613 |
* | If cap_info is -1: | |
| 614 |
* | An internal firmware failure prevented the | |
| 615 |
* | command from being processed. The status_code | |
| 616 |
* | will be set to 1. | |
| 617 |
* | | |
| 618 |
* | If cap_info is -2: | |
| 619 |
* | An authentication frame was received but was | |
| 620 |
* | not handled by the firmware. IEEE Status | |
| 621 |
* | code for the failure is returned. | |
| 622 |
* | | |
| 623 |
* | If cap_info is -3: | |
| 624 |
* | An authentication frame was received and the | |
| 625 |
* | status_code is the IEEE Status reported in the | |
| 626 |
* | response. | |
| 627 |
* | | |
| 628 |
* | If cap_info is -4: | |
| 629 |
* | (1) Association response timeout | |
| 630 |
* | (2) Authentication response timeout | |
| 631 |
* .------------------------------------------------------------. |
| 632 |
* | a_id(t_u16): 0xFFFF | |
| 633 |
* .------------------------------------------------------------. |
| 634 |
* |
| 635 |
* |
| 636 |
* For cases where an association response was received, the IEEE |
| 637 |
* standard association response frame is returned: |
| 638 |
* |
| 639 |
* .------------------------------------------------------------. |
| 640 |
* | Header(4 * sizeof(t_u16)): Standard command response hdr | |
| 641 |
* .------------------------------------------------------------. |
| 642 |
* | cap_info(t_u16): IEEE Capability | |
| 643 |
* .------------------------------------------------------------. |
| 644 |
* | status_code(t_u16): IEEE Status Code | |
| 645 |
* .------------------------------------------------------------. |
| 646 |
* | a_id(t_u16): IEEE Association ID | |
| 647 |
* .------------------------------------------------------------. |
| 648 |
* | IEEE IEs(variable): Any received IEs comprising the | |
| 649 |
* | remaining portion of a received | |
| 650 |
* | association response frame. | |
| 651 |
* .------------------------------------------------------------. |
| 652 |
* |
| 653 |
* For simplistic handling, the status_code field can be used to determine |
| 654 |
* an association success (0) or failure (non-zero). |
| 655 |
*/ |
| 656 |
int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, |
| 657 |
struct host_cmd_ds_command *resp) |
| 658 |
{ |
| 659 |
struct mwifiex_adapter *adapter = priv->adapter; |
| 660 |
int ret = 0; |
| 661 |
struct ieee_types_assoc_rsp *assoc_rsp; |
| 662 |
struct mwifiex_bssdescriptor *bss_desc; |
| 663 |
bool enable_data = true; |
| 664 |
u16 cap_info, status_code, aid; |
| 665 |
const u8 *ie_ptr; |
| 666 |
|
| 667 |
if (!priv->attempted_bss_desc) { |
| 668 |
mwifiex_dbg(priv->adapter, ERROR, |
| 669 |
"ASSOC_RESP: failed, association terminated by host\n"); |
| 670 |
goto done; |
| 671 |
} |
| 672 |
|
| 673 |
if (adapter->host_mlme_enabled) { |
| 674 |
struct ieee80211_mgmt *hdr; |
| 675 |
|
| 676 |
hdr = (struct ieee80211_mgmt *)&resp->params; |
| 677 |
if (!memcmp(hdr->bssid, |
| 678 |
priv->attempted_bss_desc->mac_address, |
| 679 |
ETH_ALEN)) |
| 680 |
assoc_rsp = (struct ieee_types_assoc_rsp *) |
| 681 |
&hdr->u.assoc_resp; |
| 682 |
else |
| 683 |
assoc_rsp = |
| 684 |
(struct ieee_types_assoc_rsp *)&resp->params; |
| 685 |
} else { |
| 686 |
assoc_rsp = (struct ieee_types_assoc_rsp *)&resp->params; |
| 687 |
} |
| 688 |
|
| 689 |
cap_info = le16_to_cpu(assoc_rsp->cap_info_bitmap); |
| 690 |
status_code = le16_to_cpu(assoc_rsp->status_code); |
| 691 |
aid = le16_to_cpu(assoc_rsp->a_id); |
| 692 |
|
| 693 |
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) |
| 694 |
dev_err(priv->adapter->dev, |
| 695 |
"invalid AID value 0x%x; bits 15:14 not set\n", |
| 696 |
aid); |
| 697 |
|
| 698 |
aid &= ~(BIT(15) | BIT(14)); |
| 699 |
|
| 700 |
priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, |
| 701 |
sizeof(priv->assoc_rsp_buf)); |
| 702 |
|
| 703 |
assoc_rsp->a_id = cpu_to_le16(aid); |
| 704 |
memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); |
| 705 |
|
| 706 |
if (status_code) { |
| 707 |
priv->adapter->dbg.num_cmd_assoc_failure++; |
| 708 |
mwifiex_dbg(priv->adapter, ERROR, |
| 709 |
"ASSOC_RESP: failed,\t" |
| 710 |
"status code=%d err=%#x a_id=%#x\n", |
| 711 |
status_code, cap_info, |
| 712 |
le16_to_cpu(assoc_rsp->a_id)); |
| 713 |
|
| 714 |
mwifiex_dbg(priv->adapter, ERROR, "assoc failure: reason %s\n", |
| 715 |
assoc_failure_reason_to_str(cap_info)); |
| 716 |
if (cap_info == CONNECT_ERR_ASSOC_ERR_TIMEOUT) { |
| 717 |
if (status_code == MWIFIEX_ASSOC_CMD_FAILURE_AUTH) { |
| 718 |
ret = WLAN_STATUS_AUTH_TIMEOUT; |
| 719 |
mwifiex_dbg(priv->adapter, ERROR, |
| 720 |
"ASSOC_RESP: AUTH timeout\n"); |
| 721 |
} else { |
| 722 |
ret = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| 723 |
mwifiex_dbg(priv->adapter, ERROR, |
| 724 |
"ASSOC_RESP: UNSPECIFIED failure\n"); |
| 725 |
} |
| 726 |
|
| 727 |
if (priv->adapter->host_mlme_enabled) |
| 728 |
priv->assoc_rsp_size = 0; |
| 729 |
} else { |
| 730 |
ret = status_code; |
| 731 |
} |
| 732 |
|
| 733 |
goto done; |
| 734 |
} |
| 735 |
|
| 736 |
/* Send a Media Connected event, according to the Spec */ |
| 737 |
priv->media_connected = true; |
| 738 |
|
| 739 |
priv->adapter->ps_state = PS_STATE_AWAKE; |
| 740 |
priv->adapter->pps_uapsd_mode = false; |
| 741 |
priv->adapter->tx_lock_flag = false; |
| 742 |
|
| 743 |
/* Set the attempted BSSID Index to current */ |
| 744 |
bss_desc = priv->attempted_bss_desc; |
| 745 |
|
| 746 |
mwifiex_dbg(priv->adapter, INFO, "info: ASSOC_RESP: %s\n", |
| 747 |
bss_desc->ssid.ssid); |
| 748 |
|
| 749 |
/* Make a copy of current BSSID descriptor */ |
| 750 |
memcpy(&priv->curr_bss_params.bss_descriptor, |
| 751 |
bss_desc, sizeof(struct mwifiex_bssdescriptor)); |
| 752 |
|
| 753 |
/* Update curr_bss_params */ |
| 754 |
priv->curr_bss_params.bss_descriptor.channel |
| 755 |
= bss_desc->phy_param_set.ds_param_set.current_chan; |
| 756 |
|
| 757 |
priv->curr_bss_params.band = (u8) bss_desc->bss_band; |
| 758 |
|
| 759 |
if (bss_desc->wmm_ie.vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC) |
| 760 |
priv->curr_bss_params.wmm_enabled = true; |
| 761 |
else |
| 762 |
priv->curr_bss_params.wmm_enabled = false; |
| 763 |
|
| 764 |
if ((priv->wmm_required || bss_desc->bcn_ht_cap) && |
| 765 |
priv->curr_bss_params.wmm_enabled) |
| 766 |
priv->wmm_enabled = true; |
| 767 |
else |
| 768 |
priv->wmm_enabled = false; |
| 769 |
|
| 770 |
priv->curr_bss_params.wmm_uapsd_enabled = false; |
| 771 |
|
| 772 |
if (priv->wmm_enabled) |
| 773 |
priv->curr_bss_params.wmm_uapsd_enabled |
| 774 |
= ((bss_desc->wmm_ie.qos_info_bitmap & |
| 775 |
IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) ? 1 : 0); |
| 776 |
|
| 777 |
/* Store the bandwidth information from assoc response */ |
| 778 |
ie_ptr = cfg80211_find_ie(WLAN_EID_HT_OPERATION, assoc_rsp->ie_buffer, |
| 779 |
priv->assoc_rsp_size |
| 780 |
- sizeof(struct ieee_types_assoc_rsp)); |
| 781 |
|
| 782 |
priv->ht_param_present = ie_ptr ? true : false; |
| 783 |
|
| 784 |
mwifiex_dbg(priv->adapter, INFO, |
| 785 |
"info: ASSOC_RESP: curr_pkt_filter is %#x\n", |
| 786 |
priv->curr_pkt_filter); |
| 787 |
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) |
| 788 |
priv->wpa_is_gtk_set = false; |
| 789 |
|
| 790 |
if (priv->wmm_enabled) { |
| 791 |
/* Don't re-enable carrier until we get the WMM_GET_STATUS |
| 792 |
event */ |
| 793 |
enable_data = false; |
| 794 |
} else { |
| 795 |
/* Since WMM is not enabled, setup the queues with the |
| 796 |
defaults */ |
| 797 |
mwifiex_wmm_setup_queue_priorities(priv, NULL); |
| 798 |
mwifiex_wmm_setup_ac_downgrade(priv); |
| 799 |
} |
| 800 |
|
| 801 |
if (enable_data) |
| 802 |
mwifiex_dbg(priv->adapter, INFO, |
| 803 |
"info: post association, re-enabling data flow\n"); |
| 804 |
|
| 805 |
/* Reset SNR/NF/RSSI values */ |
| 806 |
priv->data_rssi_last = 0; |
| 807 |
priv->data_nf_last = 0; |
| 808 |
priv->data_rssi_avg = 0; |
| 809 |
priv->data_nf_avg = 0; |
| 810 |
priv->bcn_rssi_last = 0; |
| 811 |
priv->bcn_nf_last = 0; |
| 812 |
priv->bcn_rssi_avg = 0; |
| 813 |
priv->bcn_nf_avg = 0; |
| 814 |
priv->rxpd_rate = 0; |
| 815 |
priv->rxpd_htinfo = 0; |
| 816 |
|
| 817 |
mwifiex_save_curr_bcn(priv); |
| 818 |
|
| 819 |
priv->adapter->dbg.num_cmd_assoc_success++; |
| 820 |
|
| 821 |
mwifiex_dbg(priv->adapter, MSG, "assoc: associated with %pM\n", |
| 822 |
priv->attempted_bss_desc->mac_address); |
| 823 |
|
| 824 |
/* Add the ra_list here for infra mode as there will be only 1 ra |
| 825 |
always */ |
| 826 |
mwifiex_ralist_add(priv, |
| 827 |
priv->curr_bss_params.bss_descriptor.mac_address); |
| 828 |
|
| 829 |
if (!netif_carrier_ok(priv->netdev)) |
| 830 |
netif_carrier_on(priv->netdev); |
| 831 |
mwifiex_wake_up_net_dev_queue(priv->netdev, adapter); |
| 832 |
|
| 833 |
if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) |
| 834 |
priv->scan_block = true; |
| 835 |
else |
| 836 |
priv->port_open = true; |
| 837 |
|
| 838 |
done: |
| 839 |
/* Need to indicate IOCTL complete */ |
| 840 |
if (adapter->curr_cmd->wait_q_enabled) { |
| 841 |
if (ret) |
| 842 |
adapter->cmd_wait_q.status = -1; |
| 843 |
else |
| 844 |
adapter->cmd_wait_q.status = 0; |
| 845 |
} |
| 846 |
|
| 847 |
return ret; |
| 848 |
} |
| 849 |
|
| 850 |
/* |
| 851 |
* This function prepares command for ad-hoc start. |
| 852 |
* |
| 853 |
* Driver will fill up SSID, BSS mode, IBSS parameters, physical |
| 854 |
* parameters, probe delay, and capability information. Firmware |
| 855 |
* will fill up beacon period, basic rates and operational rates. |
| 856 |
* |
| 857 |
* In addition, the following TLVs are added - |
| 858 |
* - Channel TLV |
| 859 |
* - Vendor specific IE |
| 860 |
* - WPA/WPA2 IE |
| 861 |
* - HT Capabilities IE |
| 862 |
* - HT Information IE |
| 863 |
* |
| 864 |
* Preparation also includes - |
| 865 |
* - Setting command ID and proper size |
| 866 |
* - Ensuring correct endian-ness |
| 867 |
*/ |
| 868 |
int |
| 869 |
mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, |
| 870 |
struct host_cmd_ds_command *cmd, |
| 871 |
struct cfg80211_ssid *req_ssid) |
| 872 |
{ |
| 873 |
int rsn_ie_len = 0; |
| 874 |
struct mwifiex_adapter *adapter = priv->adapter; |
| 875 |
struct host_cmd_ds_802_11_ad_hoc_start *adhoc_start = |
| 876 |
&cmd->params.adhoc_start; |
| 877 |
struct mwifiex_bssdescriptor *bss_desc; |
| 878 |
u32 cmd_append_size = 0; |
| 879 |
u32 i; |
| 880 |
u16 tmp_cap; |
| 881 |
struct mwifiex_ie_types_chan_list_param_set *chan_tlv; |
| 882 |
u8 radio_type; |
| 883 |
|
| 884 |
struct mwifiex_ie_types_htcap *ht_cap; |
| 885 |
struct mwifiex_ie_types_htinfo *ht_info; |
| 886 |
u8 *pos = (u8 *) adhoc_start + |
| 887 |
sizeof(struct host_cmd_ds_802_11_ad_hoc_start); |
| 888 |
|
| 889 |
if (!adapter) |
| 890 |
return -1; |
| 891 |
|
| 892 |
cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_START); |
| 893 |
|
| 894 |
bss_desc = &priv->curr_bss_params.bss_descriptor; |
| 895 |
priv->attempted_bss_desc = bss_desc; |
| 896 |
|
| 897 |
/* |
| 898 |
* Fill in the parameters for 2 data structures: |
| 899 |
* 1. struct host_cmd_ds_802_11_ad_hoc_start command |
| 900 |
* 2. bss_desc |
| 901 |
* Driver will fill up SSID, bss_mode,IBSS param, Physical Param, |
| 902 |
* probe delay, and Cap info. |
| 903 |
* Firmware will fill up beacon period, Basic rates |
| 904 |
* and operational rates. |
| 905 |
*/ |
| 906 |
|
| 907 |
memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN); |
| 908 |
|
| 909 |
if (req_ssid->ssid_len > IEEE80211_MAX_SSID_LEN) |
| 910 |
req_ssid->ssid_len = IEEE80211_MAX_SSID_LEN; |
| 911 |
memcpy(adhoc_start->ssid, req_ssid->ssid, req_ssid->ssid_len); |
| 912 |
|
| 913 |
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: SSID = %s\n", |
| 914 |
adhoc_start->ssid); |
| 915 |
|
| 916 |
memset(bss_desc->ssid.ssid, 0, IEEE80211_MAX_SSID_LEN); |
| 917 |
memcpy(bss_desc->ssid.ssid, req_ssid->ssid, req_ssid->ssid_len); |
| 918 |
|
| 919 |
bss_desc->ssid.ssid_len = req_ssid->ssid_len; |
| 920 |
|
| 921 |
/* Set the BSS mode */ |
| 922 |
adhoc_start->bss_mode = HostCmd_BSS_MODE_IBSS; |
| 923 |
bss_desc->bss_mode = NL80211_IFTYPE_ADHOC; |
| 924 |
adhoc_start->beacon_period = cpu_to_le16(priv->beacon_period); |
| 925 |
bss_desc->beacon_period = priv->beacon_period; |
| 926 |
|
| 927 |
/* Set Physical param set */ |
| 928 |
/* Parameter IE Id */ |
| 929 |
#define DS_PARA_IE_ID 3 |
| 930 |
/* Parameter IE length */ |
| 931 |
#define DS_PARA_IE_LEN 1 |
| 932 |
|
| 933 |
adhoc_start->phy_param_set.ds_param_set.element_id = DS_PARA_IE_ID; |
| 934 |
adhoc_start->phy_param_set.ds_param_set.len = DS_PARA_IE_LEN; |
| 935 |
|
| 936 |
if (!mwifiex_get_cfp(priv, adapter->adhoc_start_band, |
| 937 |
(u16) priv->adhoc_channel, 0)) { |
| 938 |
struct mwifiex_chan_freq_power *cfp; |
| 939 |
cfp = mwifiex_get_cfp(priv, adapter->adhoc_start_band, |
| 940 |
FIRST_VALID_CHANNEL, 0); |
| 941 |
if (cfp) |
| 942 |
priv->adhoc_channel = (u8) cfp->channel; |
| 943 |
} |
| 944 |
|
| 945 |
if (!priv->adhoc_channel) { |
| 946 |
mwifiex_dbg(adapter, ERROR, |
| 947 |
"ADHOC_S_CMD: adhoc_channel cannot be 0\n"); |
| 948 |
return -1; |
| 949 |
} |
| 950 |
|
| 951 |
mwifiex_dbg(adapter, INFO, |
| 952 |
"info: ADHOC_S_CMD: creating ADHOC on channel %d\n", |
| 953 |
priv->adhoc_channel); |
| 954 |
|
| 955 |
priv->curr_bss_params.bss_descriptor.channel = priv->adhoc_channel; |
| 956 |
priv->curr_bss_params.band = adapter->adhoc_start_band; |
| 957 |
|
| 958 |
bss_desc->channel = priv->adhoc_channel; |
| 959 |
adhoc_start->phy_param_set.ds_param_set.current_chan = |
| 960 |
priv->adhoc_channel; |
| 961 |
|
| 962 |
memcpy(&bss_desc->phy_param_set, &adhoc_start->phy_param_set, |
| 963 |
sizeof(union ieee_types_phy_param_set)); |
| 964 |
|
| 965 |
/* Set IBSS param set */ |
| 966 |
/* IBSS parameter IE Id */ |
| 967 |
#define IBSS_PARA_IE_ID 6 |
| 968 |
/* IBSS parameter IE length */ |
| 969 |
#define IBSS_PARA_IE_LEN 2 |
| 970 |
|
| 971 |
adhoc_start->ss_param_set.ibss_param_set.element_id = IBSS_PARA_IE_ID; |
| 972 |
adhoc_start->ss_param_set.ibss_param_set.len = IBSS_PARA_IE_LEN; |
| 973 |
adhoc_start->ss_param_set.ibss_param_set.atim_window |
| 974 |
= cpu_to_le16(priv->atim_window); |
| 975 |
memcpy(&bss_desc->ss_param_set, &adhoc_start->ss_param_set, |
| 976 |
sizeof(union ieee_types_ss_param_set)); |
| 977 |
|
| 978 |
/* Set Capability info */ |
| 979 |
bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_IBSS; |
| 980 |
tmp_cap = WLAN_CAPABILITY_IBSS; |
| 981 |
|
| 982 |
/* Set up privacy in bss_desc */ |
| 983 |
if (priv->sec_info.encryption_mode) { |
| 984 |
/* Ad-Hoc capability privacy on */ |
| 985 |
mwifiex_dbg(adapter, INFO, |
| 986 |
"info: ADHOC_S_CMD: wep_status set privacy to WEP\n"); |
| 987 |
bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; |
| 988 |
tmp_cap |= WLAN_CAPABILITY_PRIVACY; |
| 989 |
} else { |
| 990 |
mwifiex_dbg(adapter, INFO, |
| 991 |
"info: ADHOC_S_CMD: wep_status NOT set,\t" |
| 992 |
"setting privacy to ACCEPT ALL\n"); |
| 993 |
bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL; |
| 994 |
} |
| 995 |
|
| 996 |
memset(adhoc_start->data_rate, 0, sizeof(adhoc_start->data_rate)); |
| 997 |
mwifiex_get_active_data_rates(priv, adhoc_start->data_rate); |
| 998 |
if ((adapter->adhoc_start_band & BAND_G) && |
| 999 |
(priv->curr_pkt_filter & HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON)) { |
| 1000 |
if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL, |
| 1001 |
HostCmd_ACT_GEN_SET, 0, |
| 1002 |
&priv->curr_pkt_filter, false)) { |
| 1003 |
mwifiex_dbg(adapter, ERROR, |
| 1004 |
"ADHOC_S_CMD: G Protection config failed\n"); |
| 1005 |
return -1; |
| 1006 |
} |
| 1007 |
} |
| 1008 |
/* Find the last non zero */ |
| 1009 |
for (i = 0; i < sizeof(adhoc_start->data_rate); i++) |
| 1010 |
if (!adhoc_start->data_rate[i]) |
| 1011 |
break; |
| 1012 |
|
| 1013 |
priv->curr_bss_params.num_of_rates = i; |
| 1014 |
|
| 1015 |
/* Copy the ad-hoc creating rates into Current BSS rate structure */ |
| 1016 |
memcpy(&priv->curr_bss_params.data_rates, |
| 1017 |
&adhoc_start->data_rate, priv->curr_bss_params.num_of_rates); |
| 1018 |
|
| 1019 |
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: rates=%4ph\n", |
| 1020 |
adhoc_start->data_rate); |
| 1021 |
|
| 1022 |
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: AD-HOC Start command is ready\n"); |
| 1023 |
|
| 1024 |
if (IS_SUPPORT_MULTI_BANDS(adapter)) { |
| 1025 |
/* Append a channel TLV */ |
| 1026 |
chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; |
| 1027 |
chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| 1028 |
chan_tlv->header.len = |
| 1029 |
cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); |
| 1030 |
|
| 1031 |
memset(chan_tlv->chan_scan_param, 0x00, |
| 1032 |
sizeof(struct mwifiex_chan_scan_param_set)); |
| 1033 |
chan_tlv->chan_scan_param[0].chan_number = |
| 1034 |
(u8) priv->curr_bss_params.bss_descriptor.channel; |
| 1035 |
|
| 1036 |
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: TLV Chan = %d\n", |
| 1037 |
chan_tlv->chan_scan_param[0].chan_number); |
| 1038 |
|
| 1039 |
chan_tlv->chan_scan_param[0].radio_type |
| 1040 |
= mwifiex_band_to_radio_type(priv->curr_bss_params.band); |
| 1041 |
if (adapter->adhoc_start_band & BAND_GN || |
| 1042 |
adapter->adhoc_start_band & BAND_AN) { |
| 1043 |
if (adapter->sec_chan_offset == |
| 1044 |
IEEE80211_HT_PARAM_CHA_SEC_ABOVE) |
| 1045 |
chan_tlv->chan_scan_param[0].radio_type |= |
| 1046 |
(IEEE80211_HT_PARAM_CHA_SEC_ABOVE << 4); |
| 1047 |
else if (adapter->sec_chan_offset == |
| 1048 |
IEEE80211_HT_PARAM_CHA_SEC_BELOW) |
| 1049 |
chan_tlv->chan_scan_param[0].radio_type |= |
| 1050 |
(IEEE80211_HT_PARAM_CHA_SEC_BELOW << 4); |
| 1051 |
} |
| 1052 |
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: TLV Band = %d\n", |
| 1053 |
chan_tlv->chan_scan_param[0].radio_type); |
| 1054 |
pos += sizeof(chan_tlv->header) + |
| 1055 |
sizeof(struct mwifiex_chan_scan_param_set); |
| 1056 |
cmd_append_size += |
| 1057 |
sizeof(chan_tlv->header) + |
| 1058 |
sizeof(struct mwifiex_chan_scan_param_set); |
| 1059 |
} |
| 1060 |
|
| 1061 |
/* Append vendor specific IE TLV */ |
| 1062 |
cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, |
| 1063 |
MWIFIEX_VSIE_MASK_ADHOC, &pos); |
| 1064 |
|
| 1065 |
if (priv->sec_info.wpa_enabled) { |
| 1066 |
rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); |
| 1067 |
if (rsn_ie_len == -1) |
| 1068 |
return -1; |
| 1069 |
cmd_append_size += rsn_ie_len; |
| 1070 |
} |
| 1071 |
|
| 1072 |
if (adapter->adhoc_11n_enabled) { |
| 1073 |
/* Fill HT CAPABILITY */ |
| 1074 |
ht_cap = (struct mwifiex_ie_types_htcap *) pos; |
| 1075 |
memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap)); |
| 1076 |
ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY); |
| 1077 |
ht_cap->header.len = |
| 1078 |
cpu_to_le16(sizeof(struct ieee80211_ht_cap)); |
| 1079 |
radio_type = mwifiex_band_to_radio_type( |
| 1080 |
priv->adapter->config_bands); |
| 1081 |
mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap); |
| 1082 |
|
| 1083 |
if (adapter->sec_chan_offset == |
| 1084 |
IEEE80211_HT_PARAM_CHA_SEC_NONE) { |
| 1085 |
u16 tmp_ht_cap; |
| 1086 |
|
| 1087 |
tmp_ht_cap = le16_to_cpu(ht_cap->ht_cap.cap_info); |
| 1088 |
tmp_ht_cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| 1089 |
tmp_ht_cap &= ~IEEE80211_HT_CAP_SGI_40; |
| 1090 |
ht_cap->ht_cap.cap_info = cpu_to_le16(tmp_ht_cap); |
| 1091 |
} |
| 1092 |
|
| 1093 |
pos += sizeof(struct mwifiex_ie_types_htcap); |
| 1094 |
cmd_append_size += sizeof(struct mwifiex_ie_types_htcap); |
| 1095 |
|
| 1096 |
/* Fill HT INFORMATION */ |
| 1097 |
ht_info = (struct mwifiex_ie_types_htinfo *) pos; |
| 1098 |
memset(ht_info, 0, sizeof(struct mwifiex_ie_types_htinfo)); |
| 1099 |
ht_info->header.type = cpu_to_le16(WLAN_EID_HT_OPERATION); |
| 1100 |
ht_info->header.len = |
| 1101 |
cpu_to_le16(sizeof(struct ieee80211_ht_operation)); |
| 1102 |
|
| 1103 |
ht_info->ht_oper.primary_chan = |
| 1104 |
(u8) priv->curr_bss_params.bss_descriptor.channel; |
| 1105 |
if (adapter->sec_chan_offset) { |
| 1106 |
ht_info->ht_oper.ht_param = adapter->sec_chan_offset; |
| 1107 |
ht_info->ht_oper.ht_param |= |
| 1108 |
IEEE80211_HT_PARAM_CHAN_WIDTH_ANY; |
| 1109 |
} |
| 1110 |
ht_info->ht_oper.operation_mode = |
| 1111 |
cpu_to_le16(IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); |
| 1112 |
ht_info->ht_oper.basic_set[0] = 0xff; |
| 1113 |
pos += sizeof(struct mwifiex_ie_types_htinfo); |
| 1114 |
cmd_append_size += |
| 1115 |
sizeof(struct mwifiex_ie_types_htinfo); |
| 1116 |
} |
| 1117 |
|
| 1118 |
cmd->size = |
| 1119 |
cpu_to_le16((u16)(sizeof(struct host_cmd_ds_802_11_ad_hoc_start) |
| 1120 |
+ S_DS_GEN + cmd_append_size)); |
| 1121 |
|
| 1122 |
if (adapter->adhoc_start_band == BAND_B) |
| 1123 |
tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| 1124 |
else |
| 1125 |
tmp_cap |= WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| 1126 |
|
| 1127 |
adhoc_start->cap_info_bitmap = cpu_to_le16(tmp_cap); |
| 1128 |
|
| 1129 |
return 0; |
| 1130 |
} |
| 1131 |
|
| 1132 |
/* |
| 1133 |
* This function prepares command for ad-hoc join. |
| 1134 |
* |
| 1135 |
* Most of the parameters are set up by copying from the target BSS descriptor |
| 1136 |
* from the scan response. |
| 1137 |
* |
| 1138 |
* In addition, the following TLVs are added - |
| 1139 |
* - Channel TLV |
| 1140 |
* - Vendor specific IE |
| 1141 |
* - WPA/WPA2 IE |
| 1142 |
* - 11n IE |
| 1143 |
* |
| 1144 |
* Preparation also includes - |
| 1145 |
* - Setting command ID and proper size |
| 1146 |
* - Ensuring correct endian-ness |
| 1147 |
*/ |
| 1148 |
int |
| 1149 |
mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv, |
| 1150 |
struct host_cmd_ds_command *cmd, |
| 1151 |
struct mwifiex_bssdescriptor *bss_desc) |
| 1152 |
{ |
| 1153 |
int rsn_ie_len = 0; |
| 1154 |
struct host_cmd_ds_802_11_ad_hoc_join *adhoc_join = |
| 1155 |
&cmd->params.adhoc_join; |
| 1156 |
struct mwifiex_ie_types_chan_list_param_set *chan_tlv; |
| 1157 |
u32 cmd_append_size = 0; |
| 1158 |
u16 tmp_cap; |
| 1159 |
u32 i, rates_size = 0; |
| 1160 |
u16 curr_pkt_filter; |
| 1161 |
u8 *pos = |
| 1162 |
(u8 *) adhoc_join + |
| 1163 |
sizeof(struct host_cmd_ds_802_11_ad_hoc_join); |
| 1164 |
|
| 1165 |
/* Use G protection */ |
| 1166 |
#define USE_G_PROTECTION 0x02 |
| 1167 |
if (bss_desc->erp_flags & USE_G_PROTECTION) { |
| 1168 |
curr_pkt_filter = |
| 1169 |
priv-> |
| 1170 |
curr_pkt_filter | HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON; |
| 1171 |
|
| 1172 |
if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL, |
| 1173 |
HostCmd_ACT_GEN_SET, 0, |
| 1174 |
&curr_pkt_filter, false)) { |
| 1175 |
mwifiex_dbg(priv->adapter, ERROR, |
| 1176 |
"ADHOC_J_CMD: G Protection config failed\n"); |
| 1177 |
return -1; |
| 1178 |
} |
| 1179 |
} |
| 1180 |
|
| 1181 |
priv->attempted_bss_desc = bss_desc; |
| 1182 |
|
| 1183 |
cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_JOIN); |
| 1184 |
|
| 1185 |
adhoc_join->bss_descriptor.bss_mode = HostCmd_BSS_MODE_IBSS; |
| 1186 |
|
| 1187 |
adhoc_join->bss_descriptor.beacon_period |
| 1188 |
= cpu_to_le16(bss_desc->beacon_period); |
| 1189 |
|
| 1190 |
memcpy(&adhoc_join->bss_descriptor.bssid, |
| 1191 |
&bss_desc->mac_address, ETH_ALEN); |
| 1192 |
|
| 1193 |
memcpy(&adhoc_join->bss_descriptor.ssid, |
| 1194 |
&bss_desc->ssid.ssid, bss_desc->ssid.ssid_len); |
| 1195 |
|
| 1196 |
memcpy(&adhoc_join->bss_descriptor.phy_param_set, |
| 1197 |
&bss_desc->phy_param_set, |
| 1198 |
sizeof(union ieee_types_phy_param_set)); |
| 1199 |
|
| 1200 |
memcpy(&adhoc_join->bss_descriptor.ss_param_set, |
| 1201 |
&bss_desc->ss_param_set, sizeof(union ieee_types_ss_param_set)); |
| 1202 |
|
| 1203 |
tmp_cap = bss_desc->cap_info_bitmap; |
| 1204 |
|
| 1205 |
tmp_cap &= CAPINFO_MASK; |
| 1206 |
|
| 1207 |
mwifiex_dbg(priv->adapter, INFO, |
| 1208 |
"info: ADHOC_J_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n", |
| 1209 |
tmp_cap, CAPINFO_MASK); |
| 1210 |
|
| 1211 |
/* Information on BSSID descriptor passed to FW */ |
| 1212 |
mwifiex_dbg(priv->adapter, INFO, |
| 1213 |
"info: ADHOC_J_CMD: BSSID=%pM, SSID='%s'\n", |
| 1214 |
adhoc_join->bss_descriptor.bssid, |
| 1215 |
adhoc_join->bss_descriptor.ssid); |
| 1216 |
|
| 1217 |
for (i = 0; i < MWIFIEX_SUPPORTED_RATES && |
| 1218 |
bss_desc->supported_rates[i]; i++) |
| 1219 |
; |
| 1220 |
rates_size = i; |
| 1221 |
|
| 1222 |
/* Copy Data Rates from the Rates recorded in scan response */ |
| 1223 |
memset(adhoc_join->bss_descriptor.data_rates, 0, |
| 1224 |
sizeof(adhoc_join->bss_descriptor.data_rates)); |
| 1225 |
memcpy(adhoc_join->bss_descriptor.data_rates, |
| 1226 |
bss_desc->supported_rates, rates_size); |
| 1227 |
|
| 1228 |
/* Copy the adhoc join rates into Current BSS state structure */ |
| 1229 |
priv->curr_bss_params.num_of_rates = rates_size; |
| 1230 |
memcpy(&priv->curr_bss_params.data_rates, bss_desc->supported_rates, |
| 1231 |
rates_size); |
| 1232 |
|
| 1233 |
/* Copy the channel information */ |
| 1234 |
priv->curr_bss_params.bss_descriptor.channel = bss_desc->channel; |
| 1235 |
priv->curr_bss_params.band = (u8) bss_desc->bss_band; |
| 1236 |
|
| 1237 |
if (priv->sec_info.wep_enabled || priv->sec_info.wpa_enabled) |
| 1238 |
tmp_cap |= WLAN_CAPABILITY_PRIVACY; |
| 1239 |
|
| 1240 |
if (IS_SUPPORT_MULTI_BANDS(priv->adapter)) { |
| 1241 |
/* Append a channel TLV */ |
| 1242 |
chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; |
| 1243 |
chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| 1244 |
chan_tlv->header.len = |
| 1245 |
cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); |
| 1246 |
|
| 1247 |
memset(chan_tlv->chan_scan_param, 0x00, |
| 1248 |
sizeof(struct mwifiex_chan_scan_param_set)); |
| 1249 |
chan_tlv->chan_scan_param[0].chan_number = |
| 1250 |
(bss_desc->phy_param_set.ds_param_set.current_chan); |
| 1251 |
mwifiex_dbg(priv->adapter, INFO, "info: ADHOC_J_CMD: TLV Chan=%d\n", |
| 1252 |
chan_tlv->chan_scan_param[0].chan_number); |
| 1253 |
|
| 1254 |
chan_tlv->chan_scan_param[0].radio_type = |
| 1255 |
mwifiex_band_to_radio_type((u8) bss_desc->bss_band); |
| 1256 |
|
| 1257 |
mwifiex_dbg(priv->adapter, INFO, "info: ADHOC_J_CMD: TLV Band=%d\n", |
| 1258 |
chan_tlv->chan_scan_param[0].radio_type); |
| 1259 |
pos += sizeof(chan_tlv->header) + |
| 1260 |
sizeof(struct mwifiex_chan_scan_param_set); |
| 1261 |
cmd_append_size += sizeof(chan_tlv->header) + |
| 1262 |
sizeof(struct mwifiex_chan_scan_param_set); |
| 1263 |
} |
| 1264 |
|
| 1265 |
if (priv->sec_info.wpa_enabled) |
| 1266 |
rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); |
| 1267 |
if (rsn_ie_len == -1) |
| 1268 |
return -1; |
| 1269 |
cmd_append_size += rsn_ie_len; |
| 1270 |
|
| 1271 |
if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info)) |
| 1272 |
cmd_append_size += mwifiex_cmd_append_11n_tlv(priv, |
| 1273 |
bss_desc, &pos); |
| 1274 |
|
| 1275 |
/* Append vendor specific IE TLV */ |
| 1276 |
cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, |
| 1277 |
MWIFIEX_VSIE_MASK_ADHOC, &pos); |
| 1278 |
|
| 1279 |
cmd->size = cpu_to_le16 |
| 1280 |
((u16) (sizeof(struct host_cmd_ds_802_11_ad_hoc_join) |
| 1281 |
+ S_DS_GEN + cmd_append_size)); |
| 1282 |
|
| 1283 |
adhoc_join->bss_descriptor.cap_info_bitmap = cpu_to_le16(tmp_cap); |
| 1284 |
|
| 1285 |
return 0; |
| 1286 |
} |
| 1287 |
|
| 1288 |
/* |
| 1289 |
* This function handles the command response of ad-hoc start and |
| 1290 |
* ad-hoc join. |
| 1291 |
* |
| 1292 |
* The function generates a device-connected event to notify |
| 1293 |
* the applications, in case of successful ad-hoc start/join, and |
| 1294 |
* saves the beacon buffer. |
| 1295 |
*/ |
| 1296 |
int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv, |
| 1297 |
struct host_cmd_ds_command *resp) |
| 1298 |
{ |
| 1299 |
int ret = 0; |
| 1300 |
struct mwifiex_adapter *adapter = priv->adapter; |
| 1301 |
struct host_cmd_ds_802_11_ad_hoc_start_result *start_result = |
| 1302 |
&resp->params.start_result; |
| 1303 |
struct host_cmd_ds_802_11_ad_hoc_join_result *join_result = |
| 1304 |
&resp->params.join_result; |
| 1305 |
struct mwifiex_bssdescriptor *bss_desc; |
| 1306 |
u16 cmd = le16_to_cpu(resp->command); |
| 1307 |
u8 result; |
| 1308 |
|
| 1309 |
if (!priv->attempted_bss_desc) { |
| 1310 |
mwifiex_dbg(priv->adapter, ERROR, |
| 1311 |
"ADHOC_RESP: failed, association terminated by host\n"); |
| 1312 |
goto done; |
| 1313 |
} |
| 1314 |
|
| 1315 |
if (cmd == HostCmd_CMD_802_11_AD_HOC_START) |
| 1316 |
result = start_result->result; |
| 1317 |
else |
| 1318 |
result = join_result->result; |
| 1319 |
|
| 1320 |
bss_desc = priv->attempted_bss_desc; |
| 1321 |
|
| 1322 |
/* Join result code 0 --> SUCCESS */ |
| 1323 |
if (result) { |
| 1324 |
mwifiex_dbg(priv->adapter, ERROR, "ADHOC_RESP: failed\n"); |
| 1325 |
if (priv->media_connected) |
| 1326 |
mwifiex_reset_connect_state(priv, result, true); |
| 1327 |
|
| 1328 |
memset(&priv->curr_bss_params.bss_descriptor, |
| 1329 |
0x00, sizeof(struct mwifiex_bssdescriptor)); |
| 1330 |
|
| 1331 |
ret = -1; |
| 1332 |
goto done; |
| 1333 |
} |
| 1334 |
|
| 1335 |
/* Send a Media Connected event, according to the Spec */ |
| 1336 |
priv->media_connected = true; |
| 1337 |
|
| 1338 |
if (le16_to_cpu(resp->command) == HostCmd_CMD_802_11_AD_HOC_START) { |
| 1339 |
mwifiex_dbg(priv->adapter, INFO, "info: ADHOC_S_RESP %s\n", |
| 1340 |
bss_desc->ssid.ssid); |
| 1341 |
|
| 1342 |
/* Update the created network descriptor with the new BSSID */ |
| 1343 |
memcpy(bss_desc->mac_address, |
| 1344 |
start_result->bssid, ETH_ALEN); |
| 1345 |
|
| 1346 |
priv->adhoc_state = ADHOC_STARTED; |
| 1347 |
} else { |
| 1348 |
/* |
| 1349 |
* Now the join cmd should be successful. |
| 1350 |
* If BSSID has changed use SSID to compare instead of BSSID |
| 1351 |
*/ |
| 1352 |
mwifiex_dbg(priv->adapter, INFO, |
| 1353 |
"info: ADHOC_J_RESP %s\n", |
| 1354 |
bss_desc->ssid.ssid); |
| 1355 |
|
| 1356 |
/* |
| 1357 |
* Make a copy of current BSSID descriptor, only needed for |
| 1358 |
* join since the current descriptor is already being used |
| 1359 |
* for adhoc start |
| 1360 |
*/ |
| 1361 |
memcpy(&priv->curr_bss_params.bss_descriptor, |
| 1362 |
bss_desc, sizeof(struct mwifiex_bssdescriptor)); |
| 1363 |
|
| 1364 |
priv->adhoc_state = ADHOC_JOINED; |
| 1365 |
} |
| 1366 |
|
| 1367 |
mwifiex_dbg(priv->adapter, INFO, "info: ADHOC_RESP: channel = %d\n", |
| 1368 |
priv->adhoc_channel); |
| 1369 |
mwifiex_dbg(priv->adapter, INFO, "info: ADHOC_RESP: BSSID = %pM\n", |
| 1370 |
priv->curr_bss_params.bss_descriptor.mac_address); |
| 1371 |
|
| 1372 |
if (!netif_carrier_ok(priv->netdev)) |
| 1373 |
netif_carrier_on(priv->netdev); |
| 1374 |
mwifiex_wake_up_net_dev_queue(priv->netdev, adapter); |
| 1375 |
|
| 1376 |
mwifiex_save_curr_bcn(priv); |
| 1377 |
|
| 1378 |
done: |
| 1379 |
/* Need to indicate IOCTL complete */ |
| 1380 |
if (adapter->curr_cmd->wait_q_enabled) { |
| 1381 |
if (ret) |
| 1382 |
adapter->cmd_wait_q.status = -1; |
| 1383 |
else |
| 1384 |
adapter->cmd_wait_q.status = 0; |
| 1385 |
|
| 1386 |
} |
| 1387 |
|
| 1388 |
return ret; |
| 1389 |
} |
| 1390 |
|
| 1391 |
/* |
| 1392 |
* This function associates to a specific BSS discovered in a scan. |
| 1393 |
* |
| 1394 |
* It clears any past association response stored for application |
| 1395 |
* retrieval and calls the command preparation routine to send the |
| 1396 |
* command to firmware. |
| 1397 |
*/ |
| 1398 |
int mwifiex_associate(struct mwifiex_private *priv, |
| 1399 |
struct mwifiex_bssdescriptor *bss_desc) |
| 1400 |
{ |
| 1401 |
/* Return error if the adapter is not STA role or table entry |
| 1402 |
* is not marked as infra. |
| 1403 |
*/ |
| 1404 |
if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) || |
| 1405 |
(bss_desc->bss_mode != NL80211_IFTYPE_STATION)) |
| 1406 |
return -1; |
| 1407 |
|
| 1408 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && |
| 1409 |
!bss_desc->disable_11n && !bss_desc->disable_11ac && |
| 1410 |
priv->adapter->config_bands & BAND_AAC) |
| 1411 |
mwifiex_set_11ac_ba_params(priv); |
| 1412 |
else |
| 1413 |
mwifiex_set_ba_params(priv); |
| 1414 |
|
| 1415 |
/* Clear any past association response stored for application |
| 1416 |
retrieval */ |
| 1417 |
priv->assoc_rsp_size = 0; |
| 1418 |
|
| 1419 |
return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_ASSOCIATE, |
| 1420 |
HostCmd_ACT_GEN_SET, 0, bss_desc, true); |
| 1421 |
} |
| 1422 |
|
| 1423 |
/* |
| 1424 |
* This function starts an ad-hoc network. |
| 1425 |
* |
| 1426 |
* It calls the command preparation routine to send the command to firmware. |
| 1427 |
*/ |
| 1428 |
int |
| 1429 |
mwifiex_adhoc_start(struct mwifiex_private *priv, |
| 1430 |
struct cfg80211_ssid *adhoc_ssid) |
| 1431 |
{ |
| 1432 |
mwifiex_dbg(priv->adapter, INFO, "info: Adhoc Channel = %d\n", |
| 1433 |
priv->adhoc_channel); |
| 1434 |
mwifiex_dbg(priv->adapter, INFO, "info: curr_bss_params.channel = %d\n", |
| 1435 |
priv->curr_bss_params.bss_descriptor.channel); |
| 1436 |
mwifiex_dbg(priv->adapter, INFO, "info: curr_bss_params.band = %d\n", |
| 1437 |
priv->curr_bss_params.band); |
| 1438 |
|
| 1439 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && |
| 1440 |
priv->adapter->config_bands & BAND_AAC) |
| 1441 |
mwifiex_set_11ac_ba_params(priv); |
| 1442 |
else |
| 1443 |
mwifiex_set_ba_params(priv); |
| 1444 |
|
| 1445 |
return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_START, |
| 1446 |
HostCmd_ACT_GEN_SET, 0, adhoc_ssid, true); |
| 1447 |
} |
| 1448 |
|
| 1449 |
/* |
| 1450 |
* This function joins an ad-hoc network found in a previous scan. |
| 1451 |
* |
| 1452 |
* It calls the command preparation routine to send the command to firmware, |
| 1453 |
* if already not connected to the requested SSID. |
| 1454 |
*/ |
| 1455 |
int mwifiex_adhoc_join(struct mwifiex_private *priv, |
| 1456 |
struct mwifiex_bssdescriptor *bss_desc) |
| 1457 |
{ |
| 1458 |
mwifiex_dbg(priv->adapter, INFO, |
| 1459 |
"info: adhoc join: curr_bss ssid =%s\n", |
| 1460 |
priv->curr_bss_params.bss_descriptor.ssid.ssid); |
| 1461 |
mwifiex_dbg(priv->adapter, INFO, |
| 1462 |
"info: adhoc join: curr_bss ssid_len =%u\n", |
| 1463 |
priv->curr_bss_params.bss_descriptor.ssid.ssid_len); |
| 1464 |
mwifiex_dbg(priv->adapter, INFO, "info: adhoc join: ssid =%s\n", |
| 1465 |
bss_desc->ssid.ssid); |
| 1466 |
mwifiex_dbg(priv->adapter, INFO, "info: adhoc join: ssid_len =%u\n", |
| 1467 |
bss_desc->ssid.ssid_len); |
| 1468 |
|
| 1469 |
/* Check if the requested SSID is already joined */ |
| 1470 |
if (priv->curr_bss_params.bss_descriptor.ssid.ssid_len && |
| 1471 |
cfg80211_ssid_eq(&bss_desc->ssid, |
| 1472 |
&priv->curr_bss_params.bss_descriptor.ssid) && |
| 1473 |
(priv->curr_bss_params.bss_descriptor.bss_mode == |
| 1474 |
NL80211_IFTYPE_ADHOC)) { |
| 1475 |
mwifiex_dbg(priv->adapter, INFO, |
| 1476 |
"info: ADHOC_J_CMD: new ad-hoc SSID\t" |
| 1477 |
"is the same as current; not attempting to re-join\n"); |
| 1478 |
return -1; |
| 1479 |
} |
| 1480 |
|
| 1481 |
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && |
| 1482 |
!bss_desc->disable_11n && !bss_desc->disable_11ac && |
| 1483 |
priv->adapter->config_bands & BAND_AAC) |
| 1484 |
mwifiex_set_11ac_ba_params(priv); |
| 1485 |
else |
| 1486 |
mwifiex_set_ba_params(priv); |
| 1487 |
|
| 1488 |
mwifiex_dbg(priv->adapter, INFO, |
| 1489 |
"info: curr_bss_params.channel = %d\n", |
| 1490 |
priv->curr_bss_params.bss_descriptor.channel); |
| 1491 |
mwifiex_dbg(priv->adapter, INFO, |
| 1492 |
"info: curr_bss_params.band = %c\n", |
| 1493 |
priv->curr_bss_params.band); |
| 1494 |
|
| 1495 |
return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_JOIN, |
| 1496 |
HostCmd_ACT_GEN_SET, 0, bss_desc, true); |
| 1497 |
} |
| 1498 |
|
| 1499 |
/* |
| 1500 |
* This function deauthenticates/disconnects from infra network by sending |
| 1501 |
* deauthentication request. |
| 1502 |
*/ |
| 1503 |
static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac) |
| 1504 |
{ |
| 1505 |
u8 mac_address[ETH_ALEN]; |
| 1506 |
int ret; |
| 1507 |
|
| 1508 |
if (!mac || is_zero_ether_addr(mac)) |
| 1509 |
memcpy(mac_address, |
| 1510 |
priv->curr_bss_params.bss_descriptor.mac_address, |
| 1511 |
ETH_ALEN); |
| 1512 |
else |
| 1513 |
memcpy(mac_address, mac, ETH_ALEN); |
| 1514 |
|
| 1515 |
ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_DEAUTHENTICATE, |
| 1516 |
HostCmd_ACT_GEN_SET, 0, mac_address, true); |
| 1517 |
|
| 1518 |
return ret; |
| 1519 |
} |
| 1520 |
|
| 1521 |
/* |
| 1522 |
* This function deauthenticates/disconnects from a BSS. |
| 1523 |
* |
| 1524 |
* In case of infra made, it sends deauthentication request, and |
| 1525 |
* in case of ad-hoc mode, a stop network request is sent to the firmware. |
| 1526 |
* In AP mode, a command to stop bss is sent to firmware. |
| 1527 |
*/ |
| 1528 |
int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) |
| 1529 |
{ |
| 1530 |
int ret = 0; |
| 1531 |
|
| 1532 |
if (!priv->media_connected) |
| 1533 |
return 0; |
| 1534 |
|
| 1535 |
if (priv->adapter->host_mlme_enabled) { |
| 1536 |
priv->auth_flag = 0; |
| 1537 |
priv->auth_alg = WLAN_AUTH_NONE; |
| 1538 |
priv->host_mlme_reg = false; |
| 1539 |
priv->mgmt_frame_mask = 0; |
| 1540 |
if (mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG, |
| 1541 |
HostCmd_ACT_GEN_SET, 0, |
| 1542 |
&priv->mgmt_frame_mask, false)) { |
| 1543 |
mwifiex_dbg(priv->adapter, ERROR, |
| 1544 |
"could not unregister mgmt frame rx\n"); |
| 1545 |
return -1; |
| 1546 |
} |
| 1547 |
} |
| 1548 |
|
| 1549 |
switch (priv->bss_mode) { |
| 1550 |
case NL80211_IFTYPE_STATION: |
| 1551 |
case NL80211_IFTYPE_P2P_CLIENT: |
| 1552 |
ret = mwifiex_deauthenticate_infra(priv, mac); |
| 1553 |
if (ret) |
| 1554 |
cfg80211_disconnected(priv->netdev, 0, NULL, 0, |
| 1555 |
true, GFP_KERNEL); |
| 1556 |
break; |
| 1557 |
case NL80211_IFTYPE_ADHOC: |
| 1558 |
return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_AD_HOC_STOP, |
| 1559 |
HostCmd_ACT_GEN_SET, 0, NULL, true); |
| 1560 |
case NL80211_IFTYPE_AP: |
| 1561 |
return mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP, |
| 1562 |
HostCmd_ACT_GEN_SET, 0, NULL, true); |
| 1563 |
default: |
| 1564 |
break; |
| 1565 |
} |
| 1566 |
|
| 1567 |
return ret; |
| 1568 |
} |
| 1569 |
|
| 1570 |
/* This function deauthenticates/disconnects from all BSS. */ |
| 1571 |
void mwifiex_deauthenticate_all(struct mwifiex_adapter *adapter) |
| 1572 |
{ |
| 1573 |
struct mwifiex_private *priv; |
| 1574 |
int i; |
| 1575 |
|
| 1576 |
for (i = 0; i < adapter->priv_num; i++) { |
| 1577 |
priv = adapter->priv[i]; |
| 1578 |
mwifiex_deauthenticate(priv, NULL); |
| 1579 |
} |
| 1580 |
} |
| 1581 |
EXPORT_SYMBOL_GPL(mwifiex_deauthenticate_all); |
| 1582 |
|
| 1583 |
/* |
| 1584 |
* This function converts band to radio type used in channel TLV. |
| 1585 |
*/ |
| 1586 |
u8 |
| 1587 |
mwifiex_band_to_radio_type(u8 band) |
| 1588 |
{ |
| 1589 |
switch (band) { |
| 1590 |
case BAND_A: |
| 1591 |
case BAND_AN: |
| 1592 |
case BAND_A | BAND_AN: |
| 1593 |
case BAND_A | BAND_AN | BAND_AAC: |
| 1594 |
return HostCmd_SCAN_RADIO_TYPE_A; |
| 1595 |
case BAND_B: |
| 1596 |
case BAND_G: |
| 1597 |
case BAND_B | BAND_G: |
| 1598 |
default: |
| 1599 |
return HostCmd_SCAN_RADIO_TYPE_BG; |
| 1600 |
} |
| 1601 |
} |