| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* NXP Wireless LAN device driver: major functions |
| 4 |
* |
| 5 |
* Copyright 2011-2020 NXP |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/suspend.h> |
| 9 |
#include <net/sock.h> |
| 10 |
|
| 11 |
#include "main.h" |
| 12 |
#include "wmm.h" |
| 13 |
#include "cfg80211.h" |
| 14 |
#include "11n.h" |
| 15 |
|
| 16 |
#define VERSION "1.0" |
| 17 |
#define MFG_FIRMWARE "mwifiex_mfg.bin" |
| 18 |
|
| 19 |
static unsigned int debug_mask = MWIFIEX_DEFAULT_DEBUG_MASK; |
| 20 |
module_param(debug_mask, uint, 0); |
| 21 |
MODULE_PARM_DESC(debug_mask, "bitmap for debug flags"); |
| 22 |
|
| 23 |
const char driver_version[] = "mwifiex " VERSION " (%s) "; |
| 24 |
static char *cal_data_cfg; |
| 25 |
module_param(cal_data_cfg, charp, 0); |
| 26 |
|
| 27 |
static unsigned short driver_mode; |
| 28 |
module_param(driver_mode, ushort, 0); |
| 29 |
MODULE_PARM_DESC(driver_mode, |
| 30 |
"station=0x1(default), ap-sta=0x3, station-p2p=0x5, ap-sta-p2p=0x7"); |
| 31 |
|
| 32 |
bool mfg_mode; |
| 33 |
module_param(mfg_mode, bool, 0); |
| 34 |
MODULE_PARM_DESC(mfg_mode, "manufacturing mode enable:1, disable:0"); |
| 35 |
|
| 36 |
bool aggr_ctrl; |
| 37 |
module_param(aggr_ctrl, bool, 0000); |
| 38 |
MODULE_PARM_DESC(aggr_ctrl, "usb tx aggregation enable:1, disable:0"); |
| 39 |
|
| 40 |
const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; |
| 41 |
|
| 42 |
/* |
| 43 |
* This function registers the device and performs all the necessary |
| 44 |
* initializations. |
| 45 |
* |
| 46 |
* The following initialization operations are performed - |
| 47 |
* - Allocate adapter structure |
| 48 |
* - Save interface specific operations table in adapter |
| 49 |
* - Call interface specific initialization routine |
| 50 |
* - Allocate private structures |
| 51 |
* - Set default adapter structure parameters |
| 52 |
* - Initialize locks |
| 53 |
* |
| 54 |
* In case of any errors during inittialization, this function also ensures |
| 55 |
* proper cleanup before exiting. |
| 56 |
*/ |
| 57 |
static int mwifiex_register(void *card, struct device *dev, |
| 58 |
const struct mwifiex_if_ops *if_ops, void **padapter) |
| 59 |
{ |
| 60 |
struct mwifiex_adapter *adapter; |
| 61 |
int i; |
| 62 |
|
| 63 |
adapter = kzalloc_obj(struct mwifiex_adapter); |
| 64 |
if (!adapter) |
| 65 |
return -ENOMEM; |
| 66 |
|
| 67 |
*padapter = adapter; |
| 68 |
adapter->dev = dev; |
| 69 |
adapter->card = card; |
| 70 |
|
| 71 |
/* Save interface specific operations in adapter */ |
| 72 |
memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops)); |
| 73 |
adapter->debug_mask = debug_mask; |
| 74 |
|
| 75 |
/* card specific initialization has been deferred until now .. */ |
| 76 |
if (adapter->if_ops.init_if) |
| 77 |
if (adapter->if_ops.init_if(adapter)) |
| 78 |
goto error; |
| 79 |
|
| 80 |
adapter->priv_num = 0; |
| 81 |
|
| 82 |
for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { |
| 83 |
/* Allocate memory for private structure */ |
| 84 |
adapter->priv[i] = |
| 85 |
kzalloc_obj(struct mwifiex_private); |
| 86 |
if (!adapter->priv[i]) |
| 87 |
goto error; |
| 88 |
|
| 89 |
adapter->priv[i]->adapter = adapter; |
| 90 |
adapter->priv_num++; |
| 91 |
} |
| 92 |
mwifiex_init_lock_list(adapter); |
| 93 |
|
| 94 |
timer_setup(&adapter->cmd_timer, mwifiex_cmd_timeout_func, 0); |
| 95 |
|
| 96 |
return 0; |
| 97 |
|
| 98 |
error: |
| 99 |
mwifiex_dbg(adapter, ERROR, |
| 100 |
"info: leave mwifiex_register with error\n"); |
| 101 |
|
| 102 |
for (i = 0; i < adapter->priv_num; i++) |
| 103 |
kfree(adapter->priv[i]); |
| 104 |
|
| 105 |
kfree(adapter); |
| 106 |
|
| 107 |
return -1; |
| 108 |
} |
| 109 |
|
| 110 |
/* |
| 111 |
* This function unregisters the device and performs all the necessary |
| 112 |
* cleanups. |
| 113 |
* |
| 114 |
* The following cleanup operations are performed - |
| 115 |
* - Free the timers |
| 116 |
* - Free beacon buffers |
| 117 |
* - Free private structures |
| 118 |
* - Free adapter structure |
| 119 |
*/ |
| 120 |
static int mwifiex_unregister(struct mwifiex_adapter *adapter) |
| 121 |
{ |
| 122 |
s32 i; |
| 123 |
|
| 124 |
if (adapter->if_ops.cleanup_if) |
| 125 |
adapter->if_ops.cleanup_if(adapter); |
| 126 |
|
| 127 |
timer_shutdown_sync(&adapter->cmd_timer); |
| 128 |
|
| 129 |
/* Free private structures */ |
| 130 |
for (i = 0; i < adapter->priv_num; i++) { |
| 131 |
mwifiex_free_curr_bcn(adapter->priv[i]); |
| 132 |
kfree(adapter->priv[i]); |
| 133 |
} |
| 134 |
|
| 135 |
if (adapter->nd_info) { |
| 136 |
for (i = 0 ; i < adapter->nd_info->n_matches ; i++) |
| 137 |
kfree(adapter->nd_info->matches[i]); |
| 138 |
kfree(adapter->nd_info); |
| 139 |
adapter->nd_info = NULL; |
| 140 |
} |
| 141 |
|
| 142 |
kfree(adapter->regd); |
| 143 |
|
| 144 |
kfree(adapter); |
| 145 |
return 0; |
| 146 |
} |
| 147 |
|
| 148 |
void mwifiex_queue_main_work(struct mwifiex_adapter *adapter) |
| 149 |
{ |
| 150 |
unsigned long flags; |
| 151 |
|
| 152 |
spin_lock_irqsave(&adapter->main_proc_lock, flags); |
| 153 |
if (adapter->mwifiex_processing) { |
| 154 |
adapter->more_task_flag = true; |
| 155 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 156 |
} else { |
| 157 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 158 |
queue_work(adapter->workqueue, &adapter->main_work); |
| 159 |
} |
| 160 |
} |
| 161 |
EXPORT_SYMBOL_GPL(mwifiex_queue_main_work); |
| 162 |
|
| 163 |
static void mwifiex_queue_rx_work(struct mwifiex_adapter *adapter) |
| 164 |
{ |
| 165 |
spin_lock_bh(&adapter->rx_proc_lock); |
| 166 |
if (adapter->rx_processing) { |
| 167 |
spin_unlock_bh(&adapter->rx_proc_lock); |
| 168 |
} else { |
| 169 |
spin_unlock_bh(&adapter->rx_proc_lock); |
| 170 |
queue_work(adapter->rx_workqueue, &adapter->rx_work); |
| 171 |
} |
| 172 |
} |
| 173 |
|
| 174 |
static int mwifiex_process_rx(struct mwifiex_adapter *adapter) |
| 175 |
{ |
| 176 |
struct sk_buff *skb; |
| 177 |
struct mwifiex_rxinfo *rx_info; |
| 178 |
|
| 179 |
spin_lock_bh(&adapter->rx_proc_lock); |
| 180 |
if (adapter->rx_processing || adapter->rx_locked) { |
| 181 |
spin_unlock_bh(&adapter->rx_proc_lock); |
| 182 |
goto exit_rx_proc; |
| 183 |
} else { |
| 184 |
adapter->rx_processing = true; |
| 185 |
spin_unlock_bh(&adapter->rx_proc_lock); |
| 186 |
} |
| 187 |
|
| 188 |
/* Check for Rx data */ |
| 189 |
while ((skb = skb_dequeue(&adapter->rx_data_q))) { |
| 190 |
atomic_dec(&adapter->rx_pending); |
| 191 |
if ((adapter->delay_main_work || |
| 192 |
adapter->iface_type == MWIFIEX_USB) && |
| 193 |
(atomic_read(&adapter->rx_pending) < LOW_RX_PENDING)) { |
| 194 |
if (adapter->if_ops.submit_rem_rx_urbs) |
| 195 |
adapter->if_ops.submit_rem_rx_urbs(adapter); |
| 196 |
adapter->delay_main_work = false; |
| 197 |
mwifiex_queue_main_work(adapter); |
| 198 |
} |
| 199 |
rx_info = MWIFIEX_SKB_RXCB(skb); |
| 200 |
if (rx_info->buf_type == MWIFIEX_TYPE_AGGR_DATA) { |
| 201 |
if (adapter->if_ops.deaggr_pkt) |
| 202 |
adapter->if_ops.deaggr_pkt(adapter, skb); |
| 203 |
dev_kfree_skb_any(skb); |
| 204 |
} else { |
| 205 |
mwifiex_handle_rx_packet(adapter, skb); |
| 206 |
} |
| 207 |
} |
| 208 |
spin_lock_bh(&adapter->rx_proc_lock); |
| 209 |
adapter->rx_processing = false; |
| 210 |
spin_unlock_bh(&adapter->rx_proc_lock); |
| 211 |
|
| 212 |
exit_rx_proc: |
| 213 |
return 0; |
| 214 |
} |
| 215 |
|
| 216 |
static void maybe_quirk_fw_disable_ds(struct mwifiex_adapter *adapter) |
| 217 |
{ |
| 218 |
struct mwifiex_private *priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); |
| 219 |
struct mwifiex_ver_ext ver_ext; |
| 220 |
|
| 221 |
if (test_and_set_bit(MWIFIEX_IS_REQUESTING_FW_VEREXT, &adapter->work_flags)) |
| 222 |
return; |
| 223 |
|
| 224 |
memset(&ver_ext, 0, sizeof(ver_ext)); |
| 225 |
ver_ext.version_str_sel = 1; |
| 226 |
if (mwifiex_send_cmd(priv, HostCmd_CMD_VERSION_EXT, |
| 227 |
HostCmd_ACT_GEN_GET, 0, &ver_ext, false)) { |
| 228 |
mwifiex_dbg(priv->adapter, MSG, |
| 229 |
"Checking hardware revision failed.\n"); |
| 230 |
} |
| 231 |
} |
| 232 |
|
| 233 |
/* |
| 234 |
* The main process. |
| 235 |
* |
| 236 |
* This function is the main procedure of the driver and handles various driver |
| 237 |
* operations. It runs in a loop and provides the core functionalities. |
| 238 |
* |
| 239 |
* The main responsibilities of this function are - |
| 240 |
* - Ensure concurrency control |
| 241 |
* - Handle pending interrupts and call interrupt handlers |
| 242 |
* - Wake up the card if required |
| 243 |
* - Handle command responses and call response handlers |
| 244 |
* - Handle events and call event handlers |
| 245 |
* - Execute pending commands |
| 246 |
* - Transmit pending data packets |
| 247 |
*/ |
| 248 |
int mwifiex_main_process(struct mwifiex_adapter *adapter) |
| 249 |
{ |
| 250 |
int ret = 0; |
| 251 |
unsigned long flags; |
| 252 |
|
| 253 |
spin_lock_irqsave(&adapter->main_proc_lock, flags); |
| 254 |
|
| 255 |
/* Check if already processing */ |
| 256 |
if (adapter->mwifiex_processing || adapter->main_locked) { |
| 257 |
adapter->more_task_flag = true; |
| 258 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 259 |
return 0; |
| 260 |
} else { |
| 261 |
adapter->mwifiex_processing = true; |
| 262 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 263 |
} |
| 264 |
process_start: |
| 265 |
do { |
| 266 |
if (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) |
| 267 |
break; |
| 268 |
|
| 269 |
/* For non-USB interfaces, If we process interrupts first, it |
| 270 |
* would increase RX pending even further. Avoid this by |
| 271 |
* checking if rx_pending has crossed high threshold and |
| 272 |
* schedule rx work queue and then process interrupts. |
| 273 |
* For USB interface, there are no interrupts. We already have |
| 274 |
* HIGH_RX_PENDING check in usb.c |
| 275 |
*/ |
| 276 |
if (atomic_read(&adapter->rx_pending) >= HIGH_RX_PENDING && |
| 277 |
adapter->iface_type != MWIFIEX_USB) { |
| 278 |
adapter->delay_main_work = true; |
| 279 |
mwifiex_queue_rx_work(adapter); |
| 280 |
break; |
| 281 |
} |
| 282 |
|
| 283 |
/* Handle pending interrupt if any */ |
| 284 |
if (adapter->int_status) { |
| 285 |
if (adapter->hs_activated) |
| 286 |
mwifiex_process_hs_config(adapter); |
| 287 |
if (adapter->if_ops.process_int_status) |
| 288 |
adapter->if_ops.process_int_status(adapter); |
| 289 |
} |
| 290 |
|
| 291 |
if (adapter->rx_work_enabled && adapter->data_received) |
| 292 |
mwifiex_queue_rx_work(adapter); |
| 293 |
|
| 294 |
/* Need to wake up the card ? */ |
| 295 |
if ((adapter->ps_state == PS_STATE_SLEEP) && |
| 296 |
(adapter->pm_wakeup_card_req && |
| 297 |
!adapter->pm_wakeup_fw_try) && |
| 298 |
(is_command_pending(adapter) || |
| 299 |
!skb_queue_empty(&adapter->tx_data_q) || |
| 300 |
!mwifiex_bypass_txlist_empty(adapter) || |
| 301 |
!mwifiex_wmm_lists_empty(adapter))) { |
| 302 |
adapter->pm_wakeup_fw_try = true; |
| 303 |
mod_timer(&adapter->wakeup_timer, jiffies + (HZ*3)); |
| 304 |
adapter->if_ops.wakeup(adapter); |
| 305 |
continue; |
| 306 |
} |
| 307 |
|
| 308 |
if (IS_CARD_RX_RCVD(adapter)) { |
| 309 |
adapter->data_received = false; |
| 310 |
adapter->pm_wakeup_fw_try = false; |
| 311 |
timer_delete(&adapter->wakeup_timer); |
| 312 |
if (adapter->ps_state == PS_STATE_SLEEP) |
| 313 |
adapter->ps_state = PS_STATE_AWAKE; |
| 314 |
} else { |
| 315 |
/* We have tried to wakeup the card already */ |
| 316 |
if (adapter->pm_wakeup_fw_try) |
| 317 |
break; |
| 318 |
if (adapter->ps_state == PS_STATE_PRE_SLEEP) |
| 319 |
mwifiex_check_ps_cond(adapter); |
| 320 |
|
| 321 |
if (adapter->ps_state != PS_STATE_AWAKE) |
| 322 |
break; |
| 323 |
if (adapter->tx_lock_flag) { |
| 324 |
if (adapter->iface_type == MWIFIEX_USB) { |
| 325 |
if (!adapter->usb_mc_setup) |
| 326 |
break; |
| 327 |
} else |
| 328 |
break; |
| 329 |
} |
| 330 |
|
| 331 |
if ((!adapter->scan_chan_gap_enabled && |
| 332 |
adapter->scan_processing) || adapter->data_sent || |
| 333 |
mwifiex_is_tdls_chan_switching |
| 334 |
(mwifiex_get_priv(adapter, |
| 335 |
MWIFIEX_BSS_ROLE_STA)) || |
| 336 |
(mwifiex_wmm_lists_empty(adapter) && |
| 337 |
mwifiex_bypass_txlist_empty(adapter) && |
| 338 |
skb_queue_empty(&adapter->tx_data_q))) { |
| 339 |
if (adapter->cmd_sent || adapter->curr_cmd || |
| 340 |
!mwifiex_is_send_cmd_allowed |
| 341 |
(mwifiex_get_priv(adapter, |
| 342 |
MWIFIEX_BSS_ROLE_STA)) || |
| 343 |
(!is_command_pending(adapter))) |
| 344 |
break; |
| 345 |
} |
| 346 |
} |
| 347 |
|
| 348 |
/* Check for event */ |
| 349 |
if (adapter->event_received) { |
| 350 |
adapter->event_received = false; |
| 351 |
mwifiex_process_event(adapter); |
| 352 |
} |
| 353 |
|
| 354 |
/* Check for Cmd Resp */ |
| 355 |
if (adapter->cmd_resp_received) { |
| 356 |
adapter->cmd_resp_received = false; |
| 357 |
mwifiex_process_cmdresp(adapter); |
| 358 |
} |
| 359 |
|
| 360 |
/* Check if we need to confirm Sleep Request |
| 361 |
received previously */ |
| 362 |
if (adapter->ps_state == PS_STATE_PRE_SLEEP) |
| 363 |
mwifiex_check_ps_cond(adapter); |
| 364 |
|
| 365 |
/* * The ps_state may have been changed during processing of |
| 366 |
* Sleep Request event. |
| 367 |
*/ |
| 368 |
if ((adapter->ps_state == PS_STATE_SLEEP) || |
| 369 |
(adapter->ps_state == PS_STATE_PRE_SLEEP) || |
| 370 |
(adapter->ps_state == PS_STATE_SLEEP_CFM)) { |
| 371 |
continue; |
| 372 |
} |
| 373 |
|
| 374 |
if (adapter->tx_lock_flag) { |
| 375 |
if (adapter->iface_type == MWIFIEX_USB) { |
| 376 |
if (!adapter->usb_mc_setup) |
| 377 |
continue; |
| 378 |
} else |
| 379 |
continue; |
| 380 |
} |
| 381 |
|
| 382 |
if (!adapter->cmd_sent && !adapter->curr_cmd && |
| 383 |
mwifiex_is_send_cmd_allowed |
| 384 |
(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { |
| 385 |
if (mwifiex_exec_next_cmd(adapter) == -1) { |
| 386 |
ret = -1; |
| 387 |
break; |
| 388 |
} |
| 389 |
} |
| 390 |
|
| 391 |
/** If USB Multi channel setup ongoing, |
| 392 |
* wait for ready to tx data. |
| 393 |
*/ |
| 394 |
if (adapter->iface_type == MWIFIEX_USB && |
| 395 |
adapter->usb_mc_setup) |
| 396 |
continue; |
| 397 |
|
| 398 |
if ((adapter->scan_chan_gap_enabled || |
| 399 |
!adapter->scan_processing) && |
| 400 |
!adapter->data_sent && |
| 401 |
!skb_queue_empty(&adapter->tx_data_q)) { |
| 402 |
if (adapter->hs_activated_manually) { |
| 403 |
mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY), |
| 404 |
MWIFIEX_ASYNC_CMD); |
| 405 |
adapter->hs_activated_manually = false; |
| 406 |
} |
| 407 |
|
| 408 |
mwifiex_process_tx_queue(adapter); |
| 409 |
if (adapter->hs_activated) { |
| 410 |
clear_bit(MWIFIEX_IS_HS_CONFIGURED, |
| 411 |
&adapter->work_flags); |
| 412 |
mwifiex_hs_activated_event(adapter, false); |
| 413 |
} |
| 414 |
} |
| 415 |
|
| 416 |
if ((adapter->scan_chan_gap_enabled || |
| 417 |
!adapter->scan_processing) && |
| 418 |
!adapter->data_sent && |
| 419 |
!mwifiex_bypass_txlist_empty(adapter) && |
| 420 |
!mwifiex_is_tdls_chan_switching |
| 421 |
(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { |
| 422 |
if (adapter->hs_activated_manually) { |
| 423 |
mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY), |
| 424 |
MWIFIEX_ASYNC_CMD); |
| 425 |
adapter->hs_activated_manually = false; |
| 426 |
} |
| 427 |
|
| 428 |
mwifiex_process_bypass_tx(adapter); |
| 429 |
if (adapter->hs_activated) { |
| 430 |
clear_bit(MWIFIEX_IS_HS_CONFIGURED, |
| 431 |
&adapter->work_flags); |
| 432 |
mwifiex_hs_activated_event(adapter, false); |
| 433 |
} |
| 434 |
} |
| 435 |
|
| 436 |
if ((adapter->scan_chan_gap_enabled || |
| 437 |
!adapter->scan_processing) && |
| 438 |
!adapter->data_sent && !mwifiex_wmm_lists_empty(adapter) && |
| 439 |
!mwifiex_is_tdls_chan_switching |
| 440 |
(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { |
| 441 |
if (adapter->hs_activated_manually) { |
| 442 |
mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY), |
| 443 |
MWIFIEX_ASYNC_CMD); |
| 444 |
adapter->hs_activated_manually = false; |
| 445 |
} |
| 446 |
|
| 447 |
mwifiex_wmm_process_tx(adapter); |
| 448 |
if (adapter->hs_activated) { |
| 449 |
clear_bit(MWIFIEX_IS_HS_CONFIGURED, |
| 450 |
&adapter->work_flags); |
| 451 |
mwifiex_hs_activated_event(adapter, false); |
| 452 |
} |
| 453 |
} |
| 454 |
|
| 455 |
if (adapter->delay_null_pkt && !adapter->cmd_sent && |
| 456 |
!adapter->curr_cmd && !is_command_pending(adapter) && |
| 457 |
(mwifiex_wmm_lists_empty(adapter) && |
| 458 |
mwifiex_bypass_txlist_empty(adapter) && |
| 459 |
skb_queue_empty(&adapter->tx_data_q))) { |
| 460 |
if (!mwifiex_send_null_packet |
| 461 |
(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), |
| 462 |
MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET | |
| 463 |
MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) { |
| 464 |
adapter->delay_null_pkt = false; |
| 465 |
adapter->ps_state = PS_STATE_SLEEP; |
| 466 |
} |
| 467 |
break; |
| 468 |
} |
| 469 |
} while (true); |
| 470 |
|
| 471 |
spin_lock_irqsave(&adapter->main_proc_lock, flags); |
| 472 |
if (adapter->more_task_flag) { |
| 473 |
adapter->more_task_flag = false; |
| 474 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 475 |
goto process_start; |
| 476 |
} |
| 477 |
adapter->mwifiex_processing = false; |
| 478 |
spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| 479 |
|
| 480 |
return ret; |
| 481 |
} |
| 482 |
EXPORT_SYMBOL_GPL(mwifiex_main_process); |
| 483 |
|
| 484 |
/* |
| 485 |
* This function frees the adapter structure. |
| 486 |
* |
| 487 |
* Additionally, this closes the netlink socket, frees the timers |
| 488 |
* and private structures. |
| 489 |
*/ |
| 490 |
static void mwifiex_free_adapter(struct mwifiex_adapter *adapter) |
| 491 |
{ |
| 492 |
if (!adapter) { |
| 493 |
pr_err("%s: adapter is NULL\n", __func__); |
| 494 |
return; |
| 495 |
} |
| 496 |
|
| 497 |
if (adapter->rgpower_data) { |
| 498 |
release_firmware(adapter->rgpower_data); |
| 499 |
adapter->rgpower_data = NULL; |
| 500 |
} |
| 501 |
|
| 502 |
mwifiex_unregister(adapter); |
| 503 |
pr_debug("info: %s: free adapter\n", __func__); |
| 504 |
} |
| 505 |
|
| 506 |
/* |
| 507 |
* This function cancels all works in the queue and destroys |
| 508 |
* the main workqueue. |
| 509 |
*/ |
| 510 |
static void mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter) |
| 511 |
{ |
| 512 |
if (adapter->workqueue) { |
| 513 |
destroy_workqueue(adapter->workqueue); |
| 514 |
adapter->workqueue = NULL; |
| 515 |
} |
| 516 |
|
| 517 |
if (adapter->rx_workqueue) { |
| 518 |
destroy_workqueue(adapter->rx_workqueue); |
| 519 |
adapter->rx_workqueue = NULL; |
| 520 |
} |
| 521 |
|
| 522 |
if (adapter->host_mlme_workqueue) { |
| 523 |
destroy_workqueue(adapter->host_mlme_workqueue); |
| 524 |
adapter->host_mlme_workqueue = NULL; |
| 525 |
} |
| 526 |
} |
| 527 |
|
| 528 |
/* |
| 529 |
* This function gets firmware and initializes it. |
| 530 |
* |
| 531 |
* The main initialization steps followed are - |
| 532 |
* - Download the correct firmware to card |
| 533 |
* - Issue the init commands to firmware |
| 534 |
*/ |
| 535 |
static int _mwifiex_fw_dpc(const struct firmware *firmware, void *context) |
| 536 |
{ |
| 537 |
int ret; |
| 538 |
char fmt[64]; |
| 539 |
struct mwifiex_adapter *adapter = context; |
| 540 |
struct mwifiex_fw_image fw; |
| 541 |
bool init_failed = false; |
| 542 |
struct wireless_dev *wdev; |
| 543 |
struct completion *fw_done = adapter->fw_done; |
| 544 |
|
| 545 |
if (!firmware) { |
| 546 |
mwifiex_dbg(adapter, ERROR, |
| 547 |
"Failed to get firmware %s\n", adapter->fw_name); |
| 548 |
goto err_dnld_fw; |
| 549 |
} |
| 550 |
|
| 551 |
memset(&fw, 0, sizeof(struct mwifiex_fw_image)); |
| 552 |
adapter->firmware = firmware; |
| 553 |
fw.fw_buf = (u8 *) adapter->firmware->data; |
| 554 |
fw.fw_len = adapter->firmware->size; |
| 555 |
|
| 556 |
if (adapter->if_ops.dnld_fw) { |
| 557 |
ret = adapter->if_ops.dnld_fw(adapter, &fw); |
| 558 |
} else { |
| 559 |
ret = mwifiex_dnld_fw(adapter, &fw); |
| 560 |
} |
| 561 |
|
| 562 |
if (ret == -1) |
| 563 |
goto err_dnld_fw; |
| 564 |
|
| 565 |
mwifiex_dbg(adapter, MSG, "WLAN FW is active\n"); |
| 566 |
|
| 567 |
if (cal_data_cfg) { |
| 568 |
if ((request_firmware(&adapter->cal_data, cal_data_cfg, |
| 569 |
adapter->dev)) < 0) |
| 570 |
mwifiex_dbg(adapter, ERROR, |
| 571 |
"Cal data request_firmware() failed\n"); |
| 572 |
} |
| 573 |
|
| 574 |
/* enable host interrupt after fw dnld is successful */ |
| 575 |
if (adapter->if_ops.enable_int) { |
| 576 |
if (adapter->if_ops.enable_int(adapter)) |
| 577 |
goto err_dnld_fw; |
| 578 |
} |
| 579 |
|
| 580 |
ret = mwifiex_init_fw(adapter); |
| 581 |
if (ret == -1) |
| 582 |
goto err_init_fw; |
| 583 |
|
| 584 |
maybe_quirk_fw_disable_ds(adapter); |
| 585 |
|
| 586 |
if (!adapter->wiphy) { |
| 587 |
if (mwifiex_register_cfg80211(adapter)) { |
| 588 |
mwifiex_dbg(adapter, ERROR, |
| 589 |
"cannot register with cfg80211\n"); |
| 590 |
goto err_init_fw; |
| 591 |
} |
| 592 |
} |
| 593 |
|
| 594 |
if (mwifiex_init_channel_scan_gap(adapter)) { |
| 595 |
mwifiex_dbg(adapter, ERROR, |
| 596 |
"could not init channel stats table\n"); |
| 597 |
goto err_init_chan_scan; |
| 598 |
} |
| 599 |
|
| 600 |
if (driver_mode) { |
| 601 |
driver_mode &= MWIFIEX_DRIVER_MODE_BITMASK; |
| 602 |
driver_mode |= MWIFIEX_DRIVER_MODE_STA; |
| 603 |
} |
| 604 |
|
| 605 |
rtnl_lock(); |
| 606 |
wiphy_lock(adapter->wiphy); |
| 607 |
/* Create station interface by default */ |
| 608 |
wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d", NET_NAME_ENUM, |
| 609 |
NL80211_IFTYPE_STATION, NULL); |
| 610 |
if (IS_ERR(wdev)) { |
| 611 |
mwifiex_dbg(adapter, ERROR, |
| 612 |
"cannot create default STA interface\n"); |
| 613 |
wiphy_unlock(adapter->wiphy); |
| 614 |
rtnl_unlock(); |
| 615 |
goto err_add_intf; |
| 616 |
} |
| 617 |
|
| 618 |
if (driver_mode & MWIFIEX_DRIVER_MODE_UAP) { |
| 619 |
wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", NET_NAME_ENUM, |
| 620 |
NL80211_IFTYPE_AP, NULL); |
| 621 |
if (IS_ERR(wdev)) { |
| 622 |
mwifiex_dbg(adapter, ERROR, |
| 623 |
"cannot create AP interface\n"); |
| 624 |
wiphy_unlock(adapter->wiphy); |
| 625 |
rtnl_unlock(); |
| 626 |
goto err_add_intf; |
| 627 |
} |
| 628 |
} |
| 629 |
|
| 630 |
if (driver_mode & MWIFIEX_DRIVER_MODE_P2P) { |
| 631 |
wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", NET_NAME_ENUM, |
| 632 |
NL80211_IFTYPE_P2P_CLIENT, NULL); |
| 633 |
if (IS_ERR(wdev)) { |
| 634 |
mwifiex_dbg(adapter, ERROR, |
| 635 |
"cannot create p2p client interface\n"); |
| 636 |
wiphy_unlock(adapter->wiphy); |
| 637 |
rtnl_unlock(); |
| 638 |
goto err_add_intf; |
| 639 |
} |
| 640 |
} |
| 641 |
wiphy_unlock(adapter->wiphy); |
| 642 |
rtnl_unlock(); |
| 643 |
|
| 644 |
mwifiex_drv_get_driver_version(adapter, fmt, sizeof(fmt) - 1); |
| 645 |
mwifiex_dbg(adapter, MSG, "driver_version = %s\n", fmt); |
| 646 |
adapter->is_up = true; |
| 647 |
goto done; |
| 648 |
|
| 649 |
err_add_intf: |
| 650 |
kfree(adapter->chan_stats); |
| 651 |
err_init_chan_scan: |
| 652 |
wiphy_unregister(adapter->wiphy); |
| 653 |
wiphy_free(adapter->wiphy); |
| 654 |
err_init_fw: |
| 655 |
if (adapter->if_ops.disable_int) |
| 656 |
adapter->if_ops.disable_int(adapter); |
| 657 |
err_dnld_fw: |
| 658 |
mwifiex_dbg(adapter, ERROR, |
| 659 |
"info: %s: unregister device\n", __func__); |
| 660 |
if (adapter->if_ops.unregister_dev) |
| 661 |
adapter->if_ops.unregister_dev(adapter); |
| 662 |
|
| 663 |
set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 664 |
mwifiex_terminate_workqueue(adapter); |
| 665 |
|
| 666 |
if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { |
| 667 |
pr_debug("info: %s: shutdown mwifiex\n", __func__); |
| 668 |
mwifiex_shutdown_drv(adapter); |
| 669 |
mwifiex_free_cmd_buffers(adapter); |
| 670 |
} |
| 671 |
|
| 672 |
init_failed = true; |
| 673 |
done: |
| 674 |
if (adapter->firmware) { |
| 675 |
release_firmware(adapter->firmware); |
| 676 |
adapter->firmware = NULL; |
| 677 |
} |
| 678 |
if (init_failed) { |
| 679 |
if (adapter->irq_wakeup >= 0) |
| 680 |
device_init_wakeup(adapter->dev, false); |
| 681 |
mwifiex_free_adapter(adapter); |
| 682 |
} |
| 683 |
/* Tell all current and future waiters we're finished */ |
| 684 |
complete_all(fw_done); |
| 685 |
|
| 686 |
return init_failed ? -EIO : 0; |
| 687 |
} |
| 688 |
|
| 689 |
static void mwifiex_fw_dpc(const struct firmware *firmware, void *context) |
| 690 |
{ |
| 691 |
_mwifiex_fw_dpc(firmware, context); |
| 692 |
} |
| 693 |
|
| 694 |
/* |
| 695 |
* This function gets the firmware and (if called asynchronously) kicks off the |
| 696 |
* HW init when done. |
| 697 |
*/ |
| 698 |
static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter, |
| 699 |
bool req_fw_nowait) |
| 700 |
{ |
| 701 |
int ret; |
| 702 |
|
| 703 |
/* Override default firmware with manufacturing one if |
| 704 |
* manufacturing mode is enabled |
| 705 |
*/ |
| 706 |
if (mfg_mode) |
| 707 |
strscpy(adapter->fw_name, MFG_FIRMWARE, |
| 708 |
sizeof(adapter->fw_name)); |
| 709 |
|
| 710 |
if (req_fw_nowait) { |
| 711 |
ret = request_firmware_nowait(THIS_MODULE, 1, adapter->fw_name, |
| 712 |
adapter->dev, GFP_KERNEL, adapter, |
| 713 |
mwifiex_fw_dpc); |
| 714 |
} else { |
| 715 |
ret = request_firmware(&adapter->firmware, |
| 716 |
adapter->fw_name, |
| 717 |
adapter->dev); |
| 718 |
} |
| 719 |
|
| 720 |
if (ret < 0) |
| 721 |
mwifiex_dbg(adapter, ERROR, "request_firmware%s error %d\n", |
| 722 |
req_fw_nowait ? "_nowait" : "", ret); |
| 723 |
return ret; |
| 724 |
} |
| 725 |
|
| 726 |
/* |
| 727 |
* CFG802.11 network device handler for open. |
| 728 |
* |
| 729 |
* Starts the data queue. |
| 730 |
*/ |
| 731 |
static int |
| 732 |
mwifiex_open(struct net_device *dev) |
| 733 |
{ |
| 734 |
netif_carrier_off(dev); |
| 735 |
|
| 736 |
return 0; |
| 737 |
} |
| 738 |
|
| 739 |
/* |
| 740 |
* CFG802.11 network device handler for close. |
| 741 |
*/ |
| 742 |
static int |
| 743 |
mwifiex_close(struct net_device *dev) |
| 744 |
{ |
| 745 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 746 |
|
| 747 |
if (priv->scan_request) { |
| 748 |
struct cfg80211_scan_info info = { |
| 749 |
.aborted = true, |
| 750 |
}; |
| 751 |
|
| 752 |
mwifiex_dbg(priv->adapter, INFO, |
| 753 |
"aborting scan on ndo_stop\n"); |
| 754 |
cfg80211_scan_done(priv->scan_request, &info); |
| 755 |
priv->scan_request = NULL; |
| 756 |
priv->scan_aborting = true; |
| 757 |
} |
| 758 |
|
| 759 |
if (priv->sched_scanning) { |
| 760 |
mwifiex_dbg(priv->adapter, INFO, |
| 761 |
"aborting bgscan on ndo_stop\n"); |
| 762 |
mwifiex_stop_bg_scan(priv); |
| 763 |
cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0); |
| 764 |
} |
| 765 |
|
| 766 |
return 0; |
| 767 |
} |
| 768 |
|
| 769 |
static bool |
| 770 |
mwifiex_bypass_tx_queue(struct mwifiex_private *priv, |
| 771 |
struct sk_buff *skb) |
| 772 |
{ |
| 773 |
struct ethhdr *eth_hdr = (struct ethhdr *)skb->data; |
| 774 |
|
| 775 |
if (ntohs(eth_hdr->h_proto) == ETH_P_PAE || |
| 776 |
mwifiex_is_skb_mgmt_frame(skb) || |
| 777 |
(GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA && |
| 778 |
ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && |
| 779 |
(ntohs(eth_hdr->h_proto) == ETH_P_TDLS))) { |
| 780 |
mwifiex_dbg(priv->adapter, DATA, |
| 781 |
"bypass txqueue; eth type %#x, mgmt %d\n", |
| 782 |
ntohs(eth_hdr->h_proto), |
| 783 |
mwifiex_is_skb_mgmt_frame(skb)); |
| 784 |
if (eth_hdr->h_proto == htons(ETH_P_PAE)) |
| 785 |
mwifiex_dbg(priv->adapter, MSG, |
| 786 |
"key: send EAPOL to %pM\n", |
| 787 |
eth_hdr->h_dest); |
| 788 |
return true; |
| 789 |
} |
| 790 |
|
| 791 |
return false; |
| 792 |
} |
| 793 |
/* |
| 794 |
* Add buffer into wmm tx queue and queue work to transmit it. |
| 795 |
*/ |
| 796 |
int mwifiex_queue_tx_pkt(struct mwifiex_private *priv, struct sk_buff *skb) |
| 797 |
{ |
| 798 |
struct netdev_queue *txq; |
| 799 |
int index = mwifiex_1d_to_wmm_queue[skb->priority]; |
| 800 |
|
| 801 |
if (atomic_inc_return(&priv->wmm_tx_pending[index]) >= MAX_TX_PENDING) { |
| 802 |
txq = netdev_get_tx_queue(priv->netdev, index); |
| 803 |
if (!netif_tx_queue_stopped(txq)) { |
| 804 |
netif_tx_stop_queue(txq); |
| 805 |
mwifiex_dbg(priv->adapter, DATA, |
| 806 |
"stop queue: %d\n", index); |
| 807 |
} |
| 808 |
} |
| 809 |
|
| 810 |
if (mwifiex_bypass_tx_queue(priv, skb)) { |
| 811 |
atomic_inc(&priv->adapter->tx_pending); |
| 812 |
atomic_inc(&priv->adapter->bypass_tx_pending); |
| 813 |
mwifiex_wmm_add_buf_bypass_txqueue(priv, skb); |
| 814 |
} else { |
| 815 |
atomic_inc(&priv->adapter->tx_pending); |
| 816 |
mwifiex_wmm_add_buf_txqueue(priv, skb); |
| 817 |
} |
| 818 |
|
| 819 |
mwifiex_queue_main_work(priv->adapter); |
| 820 |
|
| 821 |
return 0; |
| 822 |
} |
| 823 |
|
| 824 |
struct sk_buff * |
| 825 |
mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv, |
| 826 |
struct sk_buff *skb, u8 flag, u64 *cookie) |
| 827 |
{ |
| 828 |
struct sk_buff *orig_skb = skb; |
| 829 |
struct mwifiex_txinfo *tx_info, *orig_tx_info; |
| 830 |
|
| 831 |
skb = skb_clone(skb, GFP_ATOMIC); |
| 832 |
if (skb) { |
| 833 |
int id; |
| 834 |
|
| 835 |
spin_lock_bh(&priv->ack_status_lock); |
| 836 |
id = idr_alloc(&priv->ack_status_frames, orig_skb, |
| 837 |
1, 0x10, GFP_ATOMIC); |
| 838 |
spin_unlock_bh(&priv->ack_status_lock); |
| 839 |
|
| 840 |
if (id >= 0) { |
| 841 |
tx_info = MWIFIEX_SKB_TXCB(skb); |
| 842 |
tx_info->ack_frame_id = id; |
| 843 |
tx_info->flags |= flag; |
| 844 |
orig_tx_info = MWIFIEX_SKB_TXCB(orig_skb); |
| 845 |
orig_tx_info->ack_frame_id = id; |
| 846 |
orig_tx_info->flags |= flag; |
| 847 |
|
| 848 |
if (flag == MWIFIEX_BUF_FLAG_ACTION_TX_STATUS && cookie) |
| 849 |
orig_tx_info->cookie = *cookie; |
| 850 |
|
| 851 |
} else if (skb_shared(skb)) { |
| 852 |
kfree_skb(orig_skb); |
| 853 |
} else { |
| 854 |
kfree_skb(skb); |
| 855 |
skb = orig_skb; |
| 856 |
} |
| 857 |
} else { |
| 858 |
/* couldn't clone -- lose tx status ... */ |
| 859 |
skb = orig_skb; |
| 860 |
} |
| 861 |
|
| 862 |
return skb; |
| 863 |
} |
| 864 |
|
| 865 |
/* |
| 866 |
* CFG802.11 network device handler for data transmission. |
| 867 |
*/ |
| 868 |
static netdev_tx_t |
| 869 |
mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 870 |
{ |
| 871 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 872 |
struct sk_buff *new_skb; |
| 873 |
struct mwifiex_txinfo *tx_info; |
| 874 |
bool multicast; |
| 875 |
|
| 876 |
mwifiex_dbg(priv->adapter, DATA, |
| 877 |
"data: %lu BSS(%d-%d): Data <= kernel\n", |
| 878 |
jiffies, priv->bss_type, priv->bss_num); |
| 879 |
|
| 880 |
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &priv->adapter->work_flags)) { |
| 881 |
kfree_skb(skb); |
| 882 |
priv->stats.tx_dropped++; |
| 883 |
return 0; |
| 884 |
} |
| 885 |
if (!skb->len || (skb->len > ETH_FRAME_LEN)) { |
| 886 |
mwifiex_dbg(priv->adapter, ERROR, |
| 887 |
"Tx: bad skb len %d\n", skb->len); |
| 888 |
kfree_skb(skb); |
| 889 |
priv->stats.tx_dropped++; |
| 890 |
return 0; |
| 891 |
} |
| 892 |
if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) { |
| 893 |
mwifiex_dbg(priv->adapter, DATA, |
| 894 |
"data: Tx: insufficient skb headroom %d\n", |
| 895 |
skb_headroom(skb)); |
| 896 |
/* Insufficient skb headroom - allocate a new skb */ |
| 897 |
new_skb = |
| 898 |
skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN); |
| 899 |
if (unlikely(!new_skb)) { |
| 900 |
mwifiex_dbg(priv->adapter, ERROR, |
| 901 |
"Tx: cannot alloca new_skb\n"); |
| 902 |
kfree_skb(skb); |
| 903 |
priv->stats.tx_dropped++; |
| 904 |
return 0; |
| 905 |
} |
| 906 |
kfree_skb(skb); |
| 907 |
skb = new_skb; |
| 908 |
mwifiex_dbg(priv->adapter, INFO, |
| 909 |
"info: new skb headroomd %d\n", |
| 910 |
skb_headroom(skb)); |
| 911 |
} |
| 912 |
|
| 913 |
tx_info = MWIFIEX_SKB_TXCB(skb); |
| 914 |
memset(tx_info, 0, sizeof(*tx_info)); |
| 915 |
tx_info->bss_num = priv->bss_num; |
| 916 |
tx_info->bss_type = priv->bss_type; |
| 917 |
tx_info->pkt_len = skb->len; |
| 918 |
|
| 919 |
multicast = is_multicast_ether_addr(skb->data); |
| 920 |
|
| 921 |
if (unlikely(!multicast && sk_requests_wifi_status(skb->sk) && |
| 922 |
priv->adapter->fw_api_ver == MWIFIEX_FW_V15)) |
| 923 |
skb = mwifiex_clone_skb_for_tx_status(priv, |
| 924 |
skb, |
| 925 |
MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS, NULL); |
| 926 |
|
| 927 |
/* Record the current time the packet was queued; used to |
| 928 |
* determine the amount of time the packet was queued in |
| 929 |
* the driver before it was sent to the firmware. |
| 930 |
* The delay is then sent along with the packet to the |
| 931 |
* firmware for aggregate delay calculation for stats and |
| 932 |
* MSDU lifetime expiry. |
| 933 |
*/ |
| 934 |
__net_timestamp(skb); |
| 935 |
|
| 936 |
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && |
| 937 |
priv->bss_type == MWIFIEX_BSS_TYPE_STA && |
| 938 |
!ether_addr_equal_unaligned(priv->cfg_bssid, skb->data)) { |
| 939 |
if (priv->adapter->auto_tdls && priv->check_tdls_tx) |
| 940 |
mwifiex_tdls_check_tx(priv, skb); |
| 941 |
} |
| 942 |
|
| 943 |
mwifiex_queue_tx_pkt(priv, skb); |
| 944 |
|
| 945 |
return 0; |
| 946 |
} |
| 947 |
|
| 948 |
int mwifiex_set_mac_address(struct mwifiex_private *priv, |
| 949 |
struct net_device *dev, bool external, |
| 950 |
u8 *new_mac) |
| 951 |
{ |
| 952 |
int ret; |
| 953 |
u64 mac_addr, old_mac_addr; |
| 954 |
|
| 955 |
old_mac_addr = ether_addr_to_u64(priv->curr_addr); |
| 956 |
|
| 957 |
if (external) { |
| 958 |
mac_addr = ether_addr_to_u64(new_mac); |
| 959 |
} else { |
| 960 |
/* Internal mac address change */ |
| 961 |
if (priv->bss_type == MWIFIEX_BSS_TYPE_ANY) |
| 962 |
return -EOPNOTSUPP; |
| 963 |
|
| 964 |
mac_addr = old_mac_addr; |
| 965 |
|
| 966 |
if (priv->bss_type == MWIFIEX_BSS_TYPE_P2P) { |
| 967 |
mac_addr |= BIT_ULL(MWIFIEX_MAC_LOCAL_ADMIN_BIT); |
| 968 |
mac_addr += priv->bss_num; |
| 969 |
} else if (priv->adapter->priv[0] != priv) { |
| 970 |
/* Set mac address based on bss_type/bss_num */ |
| 971 |
mac_addr ^= BIT_ULL(priv->bss_type + 8); |
| 972 |
mac_addr += priv->bss_num; |
| 973 |
} |
| 974 |
} |
| 975 |
|
| 976 |
u64_to_ether_addr(mac_addr, priv->curr_addr); |
| 977 |
|
| 978 |
/* Send request to firmware */ |
| 979 |
ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS, |
| 980 |
HostCmd_ACT_GEN_SET, 0, NULL, true); |
| 981 |
|
| 982 |
if (ret) { |
| 983 |
u64_to_ether_addr(old_mac_addr, priv->curr_addr); |
| 984 |
mwifiex_dbg(priv->adapter, ERROR, |
| 985 |
"set mac address failed: ret=%d\n", ret); |
| 986 |
return ret; |
| 987 |
} |
| 988 |
|
| 989 |
eth_hw_addr_set(dev, priv->curr_addr); |
| 990 |
return 0; |
| 991 |
} |
| 992 |
|
| 993 |
/* CFG802.11 network device handler for setting MAC address. |
| 994 |
*/ |
| 995 |
static int |
| 996 |
mwifiex_ndo_set_mac_address(struct net_device *dev, void *addr) |
| 997 |
{ |
| 998 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 999 |
struct sockaddr *hw_addr = addr; |
| 1000 |
|
| 1001 |
return mwifiex_set_mac_address(priv, dev, true, hw_addr->sa_data); |
| 1002 |
} |
| 1003 |
|
| 1004 |
/* |
| 1005 |
* CFG802.11 network device handler for setting multicast list. |
| 1006 |
*/ |
| 1007 |
static void mwifiex_set_multicast_list(struct net_device *dev) |
| 1008 |
{ |
| 1009 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 1010 |
struct mwifiex_multicast_list mcast_list; |
| 1011 |
|
| 1012 |
if (dev->flags & IFF_PROMISC) { |
| 1013 |
mcast_list.mode = MWIFIEX_PROMISC_MODE; |
| 1014 |
} else if (dev->flags & IFF_ALLMULTI || |
| 1015 |
netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) { |
| 1016 |
mcast_list.mode = MWIFIEX_ALL_MULTI_MODE; |
| 1017 |
} else { |
| 1018 |
mcast_list.mode = MWIFIEX_MULTICAST_MODE; |
| 1019 |
mcast_list.num_multicast_addr = |
| 1020 |
mwifiex_copy_mcast_addr(&mcast_list, dev); |
| 1021 |
} |
| 1022 |
mwifiex_request_set_multicast_list(priv, &mcast_list); |
| 1023 |
} |
| 1024 |
|
| 1025 |
/* |
| 1026 |
* CFG802.11 network device handler for transmission timeout. |
| 1027 |
*/ |
| 1028 |
static void |
| 1029 |
mwifiex_tx_timeout(struct net_device *dev, unsigned int txqueue) |
| 1030 |
{ |
| 1031 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 1032 |
|
| 1033 |
priv->num_tx_timeout++; |
| 1034 |
priv->tx_timeout_cnt++; |
| 1035 |
mwifiex_dbg(priv->adapter, ERROR, |
| 1036 |
"%lu : Tx timeout(#%d), bss_type-num = %d-%d\n", |
| 1037 |
jiffies, priv->tx_timeout_cnt, priv->bss_type, |
| 1038 |
priv->bss_num); |
| 1039 |
mwifiex_set_trans_start(dev); |
| 1040 |
|
| 1041 |
if (priv->tx_timeout_cnt > TX_TIMEOUT_THRESHOLD && |
| 1042 |
priv->adapter->if_ops.card_reset) { |
| 1043 |
mwifiex_dbg(priv->adapter, ERROR, |
| 1044 |
"tx_timeout_cnt exceeds threshold.\t" |
| 1045 |
"Triggering card reset!\n"); |
| 1046 |
priv->adapter->if_ops.card_reset(priv->adapter); |
| 1047 |
} |
| 1048 |
} |
| 1049 |
|
| 1050 |
void mwifiex_multi_chan_resync(struct mwifiex_adapter *adapter) |
| 1051 |
{ |
| 1052 |
struct usb_card_rec *card = adapter->card; |
| 1053 |
struct mwifiex_private *priv; |
| 1054 |
u16 tx_buf_size; |
| 1055 |
int i, ret; |
| 1056 |
|
| 1057 |
card->mc_resync_flag = true; |
| 1058 |
for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| 1059 |
if (atomic_read(&card->port[i].tx_data_urb_pending)) { |
| 1060 |
mwifiex_dbg(adapter, WARN, "pending data urb in sys\n"); |
| 1061 |
return; |
| 1062 |
} |
| 1063 |
} |
| 1064 |
|
| 1065 |
card->mc_resync_flag = false; |
| 1066 |
tx_buf_size = 0xffff; |
| 1067 |
priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| 1068 |
ret = mwifiex_send_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, |
| 1069 |
HostCmd_ACT_GEN_SET, 0, &tx_buf_size, false); |
| 1070 |
if (ret) |
| 1071 |
mwifiex_dbg(adapter, ERROR, |
| 1072 |
"send reconfig tx buf size cmd err\n"); |
| 1073 |
} |
| 1074 |
EXPORT_SYMBOL_GPL(mwifiex_multi_chan_resync); |
| 1075 |
|
| 1076 |
void mwifiex_upload_device_dump(struct mwifiex_adapter *adapter) |
| 1077 |
{ |
| 1078 |
/* Dump all the memory data into single file, a userspace script will |
| 1079 |
* be used to split all the memory data to multiple files |
| 1080 |
*/ |
| 1081 |
mwifiex_dbg(adapter, MSG, |
| 1082 |
"== mwifiex dump information to /sys/class/devcoredump start\n"); |
| 1083 |
dev_coredumpv(adapter->dev, adapter->devdump_data, adapter->devdump_len, |
| 1084 |
GFP_KERNEL); |
| 1085 |
mwifiex_dbg(adapter, MSG, |
| 1086 |
"== mwifiex dump information to /sys/class/devcoredump end\n"); |
| 1087 |
|
| 1088 |
/* Device dump data will be freed in device coredump release function |
| 1089 |
* after 5 min. Here reset adapter->devdump_data and ->devdump_len |
| 1090 |
* to avoid it been accidentally reused. |
| 1091 |
*/ |
| 1092 |
adapter->devdump_data = NULL; |
| 1093 |
adapter->devdump_len = 0; |
| 1094 |
} |
| 1095 |
EXPORT_SYMBOL_GPL(mwifiex_upload_device_dump); |
| 1096 |
|
| 1097 |
void mwifiex_drv_info_dump(struct mwifiex_adapter *adapter) |
| 1098 |
{ |
| 1099 |
char *p; |
| 1100 |
char drv_version[64]; |
| 1101 |
struct usb_card_rec *cardp; |
| 1102 |
struct sdio_mmc_card *sdio_card; |
| 1103 |
struct mwifiex_private *priv; |
| 1104 |
int i, idx; |
| 1105 |
struct netdev_queue *txq; |
| 1106 |
struct mwifiex_debug_info *debug_info; |
| 1107 |
|
| 1108 |
mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump start===\n"); |
| 1109 |
|
| 1110 |
p = adapter->devdump_data; |
| 1111 |
strcpy(p, "========Start dump driverinfo========\n"); |
| 1112 |
p += strlen("========Start dump driverinfo========\n"); |
| 1113 |
p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); |
| 1114 |
|
| 1115 |
mwifiex_drv_get_driver_version(adapter, drv_version, |
| 1116 |
sizeof(drv_version) - 1); |
| 1117 |
p += sprintf(p, "driver_version = %s\n", drv_version); |
| 1118 |
|
| 1119 |
if (adapter->iface_type == MWIFIEX_USB) { |
| 1120 |
cardp = (struct usb_card_rec *)adapter->card; |
| 1121 |
p += sprintf(p, "tx_cmd_urb_pending = %d\n", |
| 1122 |
atomic_read(&cardp->tx_cmd_urb_pending)); |
| 1123 |
p += sprintf(p, "tx_data_urb_pending_port_0 = %d\n", |
| 1124 |
atomic_read(&cardp->port[0].tx_data_urb_pending)); |
| 1125 |
p += sprintf(p, "tx_data_urb_pending_port_1 = %d\n", |
| 1126 |
atomic_read(&cardp->port[1].tx_data_urb_pending)); |
| 1127 |
p += sprintf(p, "rx_cmd_urb_pending = %d\n", |
| 1128 |
atomic_read(&cardp->rx_cmd_urb_pending)); |
| 1129 |
p += sprintf(p, "rx_data_urb_pending = %d\n", |
| 1130 |
atomic_read(&cardp->rx_data_urb_pending)); |
| 1131 |
} |
| 1132 |
|
| 1133 |
p += sprintf(p, "tx_pending = %d\n", |
| 1134 |
atomic_read(&adapter->tx_pending)); |
| 1135 |
p += sprintf(p, "rx_pending = %d\n", |
| 1136 |
atomic_read(&adapter->rx_pending)); |
| 1137 |
|
| 1138 |
if (adapter->iface_type == MWIFIEX_SDIO) { |
| 1139 |
sdio_card = (struct sdio_mmc_card *)adapter->card; |
| 1140 |
p += sprintf(p, "\nmp_rd_bitmap=0x%x curr_rd_port=0x%x\n", |
| 1141 |
sdio_card->mp_rd_bitmap, sdio_card->curr_rd_port); |
| 1142 |
p += sprintf(p, "mp_wr_bitmap=0x%x curr_wr_port=0x%x\n", |
| 1143 |
sdio_card->mp_wr_bitmap, sdio_card->curr_wr_port); |
| 1144 |
} |
| 1145 |
|
| 1146 |
for (i = 0; i < adapter->priv_num; i++) { |
| 1147 |
if (!adapter->priv[i]->netdev) |
| 1148 |
continue; |
| 1149 |
priv = adapter->priv[i]; |
| 1150 |
p += sprintf(p, "\n[interface : \"%s\"]\n", |
| 1151 |
priv->netdev->name); |
| 1152 |
p += sprintf(p, "wmm_tx_pending[0] = %d\n", |
| 1153 |
atomic_read(&priv->wmm_tx_pending[0])); |
| 1154 |
p += sprintf(p, "wmm_tx_pending[1] = %d\n", |
| 1155 |
atomic_read(&priv->wmm_tx_pending[1])); |
| 1156 |
p += sprintf(p, "wmm_tx_pending[2] = %d\n", |
| 1157 |
atomic_read(&priv->wmm_tx_pending[2])); |
| 1158 |
p += sprintf(p, "wmm_tx_pending[3] = %d\n", |
| 1159 |
atomic_read(&priv->wmm_tx_pending[3])); |
| 1160 |
p += sprintf(p, "media_state=\"%s\"\n", !priv->media_connected ? |
| 1161 |
"Disconnected" : "Connected"); |
| 1162 |
p += sprintf(p, "carrier %s\n", (netif_carrier_ok(priv->netdev) |
| 1163 |
? "on" : "off")); |
| 1164 |
for (idx = 0; idx < priv->netdev->num_tx_queues; idx++) { |
| 1165 |
txq = netdev_get_tx_queue(priv->netdev, idx); |
| 1166 |
p += sprintf(p, "tx queue %d:%s ", idx, |
| 1167 |
netif_tx_queue_stopped(txq) ? |
| 1168 |
"stopped" : "started"); |
| 1169 |
} |
| 1170 |
p += sprintf(p, "\n%s: num_tx_timeout = %d\n", |
| 1171 |
priv->netdev->name, priv->num_tx_timeout); |
| 1172 |
} |
| 1173 |
|
| 1174 |
if (adapter->iface_type == MWIFIEX_SDIO || |
| 1175 |
adapter->iface_type == MWIFIEX_PCIE) { |
| 1176 |
p += sprintf(p, "\n=== %s register dump===\n", |
| 1177 |
adapter->iface_type == MWIFIEX_SDIO ? |
| 1178 |
"SDIO" : "PCIE"); |
| 1179 |
if (adapter->if_ops.reg_dump) |
| 1180 |
p += adapter->if_ops.reg_dump(adapter, p); |
| 1181 |
} |
| 1182 |
p += sprintf(p, "\n=== more debug information\n"); |
| 1183 |
debug_info = kzalloc_obj(*debug_info); |
| 1184 |
if (debug_info) { |
| 1185 |
for (i = 0; i < adapter->priv_num; i++) { |
| 1186 |
if (!adapter->priv[i]->netdev) |
| 1187 |
continue; |
| 1188 |
priv = adapter->priv[i]; |
| 1189 |
mwifiex_get_debug_info(priv, debug_info); |
| 1190 |
p += mwifiex_debug_info_to_buffer(priv, p, debug_info); |
| 1191 |
break; |
| 1192 |
} |
| 1193 |
kfree(debug_info); |
| 1194 |
} |
| 1195 |
|
| 1196 |
strcpy(p, "\n========End dump========\n"); |
| 1197 |
p += strlen("\n========End dump========\n"); |
| 1198 |
mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump end===\n"); |
| 1199 |
adapter->devdump_len = p - (char *)adapter->devdump_data; |
| 1200 |
} |
| 1201 |
EXPORT_SYMBOL_GPL(mwifiex_drv_info_dump); |
| 1202 |
|
| 1203 |
void mwifiex_prepare_fw_dump_info(struct mwifiex_adapter *adapter) |
| 1204 |
{ |
| 1205 |
u8 idx; |
| 1206 |
char *fw_dump_ptr; |
| 1207 |
u32 dump_len = 0; |
| 1208 |
|
| 1209 |
for (idx = 0; idx < adapter->num_mem_types; idx++) { |
| 1210 |
struct memory_type_mapping *entry = |
| 1211 |
&adapter->mem_type_mapping_tbl[idx]; |
| 1212 |
|
| 1213 |
if (entry->mem_ptr) { |
| 1214 |
dump_len += (strlen("========Start dump ") + |
| 1215 |
strlen(entry->mem_name) + |
| 1216 |
strlen("========\n") + |
| 1217 |
(entry->mem_size + 1) + |
| 1218 |
strlen("\n========End dump========\n")); |
| 1219 |
} |
| 1220 |
} |
| 1221 |
|
| 1222 |
if (dump_len + 1 + adapter->devdump_len > MWIFIEX_FW_DUMP_SIZE) { |
| 1223 |
/* Realloc in case buffer overflow */ |
| 1224 |
fw_dump_ptr = vzalloc(dump_len + 1 + adapter->devdump_len); |
| 1225 |
mwifiex_dbg(adapter, MSG, "Realloc device dump data.\n"); |
| 1226 |
if (!fw_dump_ptr) { |
| 1227 |
vfree(adapter->devdump_data); |
| 1228 |
mwifiex_dbg(adapter, ERROR, |
| 1229 |
"vzalloc devdump data failure!\n"); |
| 1230 |
return; |
| 1231 |
} |
| 1232 |
|
| 1233 |
memmove(fw_dump_ptr, adapter->devdump_data, |
| 1234 |
adapter->devdump_len); |
| 1235 |
vfree(adapter->devdump_data); |
| 1236 |
adapter->devdump_data = fw_dump_ptr; |
| 1237 |
} |
| 1238 |
|
| 1239 |
fw_dump_ptr = (char *)adapter->devdump_data + adapter->devdump_len; |
| 1240 |
|
| 1241 |
for (idx = 0; idx < adapter->num_mem_types; idx++) { |
| 1242 |
struct memory_type_mapping *entry = |
| 1243 |
&adapter->mem_type_mapping_tbl[idx]; |
| 1244 |
|
| 1245 |
if (entry->mem_ptr) { |
| 1246 |
strcpy(fw_dump_ptr, "========Start dump "); |
| 1247 |
fw_dump_ptr += strlen("========Start dump "); |
| 1248 |
|
| 1249 |
strcpy(fw_dump_ptr, entry->mem_name); |
| 1250 |
fw_dump_ptr += strlen(entry->mem_name); |
| 1251 |
|
| 1252 |
strcpy(fw_dump_ptr, "========\n"); |
| 1253 |
fw_dump_ptr += strlen("========\n"); |
| 1254 |
|
| 1255 |
memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size); |
| 1256 |
fw_dump_ptr += entry->mem_size; |
| 1257 |
|
| 1258 |
strcpy(fw_dump_ptr, "\n========End dump========\n"); |
| 1259 |
fw_dump_ptr += strlen("\n========End dump========\n"); |
| 1260 |
} |
| 1261 |
} |
| 1262 |
|
| 1263 |
adapter->devdump_len = fw_dump_ptr - (char *)adapter->devdump_data; |
| 1264 |
|
| 1265 |
for (idx = 0; idx < adapter->num_mem_types; idx++) { |
| 1266 |
struct memory_type_mapping *entry = |
| 1267 |
&adapter->mem_type_mapping_tbl[idx]; |
| 1268 |
|
| 1269 |
vfree(entry->mem_ptr); |
| 1270 |
entry->mem_ptr = NULL; |
| 1271 |
entry->mem_size = 0; |
| 1272 |
} |
| 1273 |
} |
| 1274 |
EXPORT_SYMBOL_GPL(mwifiex_prepare_fw_dump_info); |
| 1275 |
|
| 1276 |
/* |
| 1277 |
* CFG802.11 network device handler for statistics retrieval. |
| 1278 |
*/ |
| 1279 |
static struct net_device_stats *mwifiex_get_stats(struct net_device *dev) |
| 1280 |
{ |
| 1281 |
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| 1282 |
|
| 1283 |
return &priv->stats; |
| 1284 |
} |
| 1285 |
|
| 1286 |
static u16 |
| 1287 |
mwifiex_netdev_select_wmm_queue(struct net_device *dev, struct sk_buff *skb, |
| 1288 |
struct net_device *sb_dev) |
| 1289 |
{ |
| 1290 |
skb->priority = cfg80211_classify8021d(skb, NULL); |
| 1291 |
return mwifiex_1d_to_wmm_queue[skb->priority]; |
| 1292 |
} |
| 1293 |
|
| 1294 |
/* Network device handlers */ |
| 1295 |
static const struct net_device_ops mwifiex_netdev_ops = { |
| 1296 |
.ndo_open = mwifiex_open, |
| 1297 |
.ndo_stop = mwifiex_close, |
| 1298 |
.ndo_start_xmit = mwifiex_hard_start_xmit, |
| 1299 |
.ndo_set_mac_address = mwifiex_ndo_set_mac_address, |
| 1300 |
.ndo_validate_addr = eth_validate_addr, |
| 1301 |
.ndo_tx_timeout = mwifiex_tx_timeout, |
| 1302 |
.ndo_get_stats = mwifiex_get_stats, |
| 1303 |
.ndo_set_rx_mode = mwifiex_set_multicast_list, |
| 1304 |
.ndo_select_queue = mwifiex_netdev_select_wmm_queue, |
| 1305 |
}; |
| 1306 |
|
| 1307 |
/* |
| 1308 |
* This function initializes the private structure parameters. |
| 1309 |
* |
| 1310 |
* The following wait queues are initialized - |
| 1311 |
* - IOCTL wait queue |
| 1312 |
* - Command wait queue |
| 1313 |
* - Statistics wait queue |
| 1314 |
* |
| 1315 |
* ...and the following default parameters are set - |
| 1316 |
* - Current key index : Set to 0 |
| 1317 |
* - Rate index : Set to auto |
| 1318 |
* - Media connected : Set to disconnected |
| 1319 |
* - Adhoc link sensed : Set to false |
| 1320 |
* - Nick name : Set to null |
| 1321 |
* - Number of Tx timeout : Set to 0 |
| 1322 |
* - Device address : Set to current address |
| 1323 |
* - Rx histogram statistc : Set to 0 |
| 1324 |
* |
| 1325 |
* In addition, the CFG80211 work queue is also created. |
| 1326 |
*/ |
| 1327 |
void mwifiex_init_priv_params(struct mwifiex_private *priv, |
| 1328 |
struct net_device *dev) |
| 1329 |
{ |
| 1330 |
dev->netdev_ops = &mwifiex_netdev_ops; |
| 1331 |
dev->needs_free_netdev = true; |
| 1332 |
/* Initialize private structure */ |
| 1333 |
priv->current_key_index = 0; |
| 1334 |
priv->media_connected = false; |
| 1335 |
memset(priv->mgmt_ie, 0, |
| 1336 |
sizeof(struct mwifiex_ie) * MAX_MGMT_IE_INDEX); |
| 1337 |
priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK; |
| 1338 |
priv->proberesp_idx = MWIFIEX_AUTO_IDX_MASK; |
| 1339 |
priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK; |
| 1340 |
priv->gen_idx = MWIFIEX_AUTO_IDX_MASK; |
| 1341 |
priv->num_tx_timeout = 0; |
| 1342 |
if (is_valid_ether_addr(dev->dev_addr)) |
| 1343 |
ether_addr_copy(priv->curr_addr, dev->dev_addr); |
| 1344 |
else |
| 1345 |
ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr); |
| 1346 |
|
| 1347 |
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA || |
| 1348 |
GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { |
| 1349 |
priv->hist_data = kmalloc_obj(*priv->hist_data); |
| 1350 |
if (priv->hist_data) |
| 1351 |
mwifiex_hist_data_reset(priv); |
| 1352 |
} |
| 1353 |
} |
| 1354 |
|
| 1355 |
/* |
| 1356 |
* This function check if command is pending. |
| 1357 |
*/ |
| 1358 |
int is_command_pending(struct mwifiex_adapter *adapter) |
| 1359 |
{ |
| 1360 |
int is_cmd_pend_q_empty; |
| 1361 |
|
| 1362 |
spin_lock_bh(&adapter->cmd_pending_q_lock); |
| 1363 |
is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); |
| 1364 |
spin_unlock_bh(&adapter->cmd_pending_q_lock); |
| 1365 |
|
| 1366 |
return !is_cmd_pend_q_empty; |
| 1367 |
} |
| 1368 |
|
| 1369 |
/* This is the host mlme work queue function. |
| 1370 |
* It handles the host mlme operations. |
| 1371 |
*/ |
| 1372 |
static void mwifiex_host_mlme_work_queue(struct work_struct *work) |
| 1373 |
{ |
| 1374 |
struct mwifiex_adapter *adapter = |
| 1375 |
container_of(work, struct mwifiex_adapter, host_mlme_work); |
| 1376 |
|
| 1377 |
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) |
| 1378 |
return; |
| 1379 |
|
| 1380 |
/* Check for host mlme disconnection */ |
| 1381 |
if (adapter->host_mlme_link_lost) { |
| 1382 |
if (adapter->priv_link_lost) { |
| 1383 |
mwifiex_reset_connect_state(adapter->priv_link_lost, |
| 1384 |
WLAN_REASON_DEAUTH_LEAVING, |
| 1385 |
true); |
| 1386 |
adapter->priv_link_lost = NULL; |
| 1387 |
} |
| 1388 |
adapter->host_mlme_link_lost = false; |
| 1389 |
} |
| 1390 |
|
| 1391 |
/* Check for host mlme Assoc Resp */ |
| 1392 |
if (adapter->assoc_resp_received) { |
| 1393 |
mwifiex_process_assoc_resp(adapter); |
| 1394 |
adapter->assoc_resp_received = false; |
| 1395 |
} |
| 1396 |
} |
| 1397 |
|
| 1398 |
/* |
| 1399 |
* This is the RX work queue function. |
| 1400 |
* |
| 1401 |
* It handles the RX operations. |
| 1402 |
*/ |
| 1403 |
static void mwifiex_rx_work_queue(struct work_struct *work) |
| 1404 |
{ |
| 1405 |
struct mwifiex_adapter *adapter = |
| 1406 |
container_of(work, struct mwifiex_adapter, rx_work); |
| 1407 |
|
| 1408 |
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) |
| 1409 |
return; |
| 1410 |
mwifiex_process_rx(adapter); |
| 1411 |
} |
| 1412 |
|
| 1413 |
/* |
| 1414 |
* This is the main work queue function. |
| 1415 |
* |
| 1416 |
* It handles the main process, which in turn handles the complete |
| 1417 |
* driver operations. |
| 1418 |
*/ |
| 1419 |
static void mwifiex_main_work_queue(struct work_struct *work) |
| 1420 |
{ |
| 1421 |
struct mwifiex_adapter *adapter = |
| 1422 |
container_of(work, struct mwifiex_adapter, main_work); |
| 1423 |
|
| 1424 |
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) |
| 1425 |
return; |
| 1426 |
mwifiex_main_process(adapter); |
| 1427 |
} |
| 1428 |
|
| 1429 |
/* Common teardown code used for both device removal and reset */ |
| 1430 |
static void mwifiex_uninit_sw(struct mwifiex_adapter *adapter) |
| 1431 |
{ |
| 1432 |
struct mwifiex_private *priv; |
| 1433 |
int i; |
| 1434 |
|
| 1435 |
/* We can no longer handle interrupts once we start doing the teardown |
| 1436 |
* below. |
| 1437 |
*/ |
| 1438 |
if (adapter->if_ops.disable_int) |
| 1439 |
adapter->if_ops.disable_int(adapter); |
| 1440 |
|
| 1441 |
set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 1442 |
mwifiex_terminate_workqueue(adapter); |
| 1443 |
adapter->int_status = 0; |
| 1444 |
|
| 1445 |
/* Stop data */ |
| 1446 |
for (i = 0; i < adapter->priv_num; i++) { |
| 1447 |
priv = adapter->priv[i]; |
| 1448 |
if (priv->netdev) { |
| 1449 |
mwifiex_stop_net_dev_queue(priv->netdev, adapter); |
| 1450 |
if (netif_carrier_ok(priv->netdev)) |
| 1451 |
netif_carrier_off(priv->netdev); |
| 1452 |
netif_device_detach(priv->netdev); |
| 1453 |
} |
| 1454 |
} |
| 1455 |
|
| 1456 |
mwifiex_dbg(adapter, CMD, "cmd: calling mwifiex_shutdown_drv...\n"); |
| 1457 |
mwifiex_shutdown_drv(adapter); |
| 1458 |
mwifiex_dbg(adapter, CMD, "cmd: mwifiex_shutdown_drv done\n"); |
| 1459 |
|
| 1460 |
if (atomic_read(&adapter->rx_pending) || |
| 1461 |
atomic_read(&adapter->tx_pending) || |
| 1462 |
atomic_read(&adapter->cmd_pending)) { |
| 1463 |
mwifiex_dbg(adapter, ERROR, |
| 1464 |
"rx_pending=%d, tx_pending=%d,\t" |
| 1465 |
"cmd_pending=%d\n", |
| 1466 |
atomic_read(&adapter->rx_pending), |
| 1467 |
atomic_read(&adapter->tx_pending), |
| 1468 |
atomic_read(&adapter->cmd_pending)); |
| 1469 |
} |
| 1470 |
|
| 1471 |
for (i = 0; i < adapter->priv_num; i++) { |
| 1472 |
priv = adapter->priv[i]; |
| 1473 |
rtnl_lock(); |
| 1474 |
if (priv->netdev && |
| 1475 |
priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED) { |
| 1476 |
/* |
| 1477 |
* Close the netdev now, because if we do it later, the |
| 1478 |
* netdev notifiers will need to acquire the wiphy lock |
| 1479 |
* again --> deadlock. |
| 1480 |
*/ |
| 1481 |
dev_close(priv->wdev.netdev); |
| 1482 |
wiphy_lock(adapter->wiphy); |
| 1483 |
mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev); |
| 1484 |
wiphy_unlock(adapter->wiphy); |
| 1485 |
} |
| 1486 |
rtnl_unlock(); |
| 1487 |
} |
| 1488 |
|
| 1489 |
wiphy_unregister(adapter->wiphy); |
| 1490 |
wiphy_free(adapter->wiphy); |
| 1491 |
adapter->wiphy = NULL; |
| 1492 |
|
| 1493 |
kfree(adapter->chan_stats); |
| 1494 |
mwifiex_free_cmd_buffers(adapter); |
| 1495 |
} |
| 1496 |
|
| 1497 |
/* |
| 1498 |
* This function can be used for shutting down the adapter SW. |
| 1499 |
*/ |
| 1500 |
int mwifiex_shutdown_sw(struct mwifiex_adapter *adapter) |
| 1501 |
{ |
| 1502 |
struct mwifiex_private *priv; |
| 1503 |
|
| 1504 |
if (!adapter) |
| 1505 |
return 0; |
| 1506 |
|
| 1507 |
wait_for_completion(adapter->fw_done); |
| 1508 |
/* Caller should ensure we aren't suspending while this happens */ |
| 1509 |
reinit_completion(adapter->fw_done); |
| 1510 |
|
| 1511 |
priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| 1512 |
mwifiex_deauthenticate(priv, NULL); |
| 1513 |
|
| 1514 |
mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN); |
| 1515 |
|
| 1516 |
mwifiex_uninit_sw(adapter); |
| 1517 |
adapter->is_up = false; |
| 1518 |
|
| 1519 |
if (adapter->if_ops.down_dev) |
| 1520 |
adapter->if_ops.down_dev(adapter); |
| 1521 |
|
| 1522 |
return 0; |
| 1523 |
} |
| 1524 |
EXPORT_SYMBOL_GPL(mwifiex_shutdown_sw); |
| 1525 |
|
| 1526 |
/* This function can be used for reinitting the adapter SW. Required |
| 1527 |
* code is extracted from mwifiex_add_card() |
| 1528 |
*/ |
| 1529 |
int |
| 1530 |
mwifiex_reinit_sw(struct mwifiex_adapter *adapter) |
| 1531 |
{ |
| 1532 |
int ret; |
| 1533 |
|
| 1534 |
mwifiex_init_lock_list(adapter); |
| 1535 |
if (adapter->if_ops.up_dev) |
| 1536 |
adapter->if_ops.up_dev(adapter); |
| 1537 |
|
| 1538 |
adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; |
| 1539 |
clear_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 1540 |
clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| 1541 |
adapter->hs_activated = false; |
| 1542 |
clear_bit(MWIFIEX_IS_CMD_TIMEDOUT, &adapter->work_flags); |
| 1543 |
init_waitqueue_head(&adapter->hs_activate_wait_q); |
| 1544 |
init_waitqueue_head(&adapter->cmd_wait_q.wait); |
| 1545 |
adapter->cmd_wait_q.status = 0; |
| 1546 |
adapter->scan_wait_q_woken = false; |
| 1547 |
|
| 1548 |
if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB) |
| 1549 |
adapter->rx_work_enabled = true; |
| 1550 |
|
| 1551 |
adapter->workqueue = |
| 1552 |
alloc_workqueue("MWIFIEX_WORK_QUEUE", |
| 1553 |
WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 0); |
| 1554 |
if (!adapter->workqueue) |
| 1555 |
goto err_kmalloc; |
| 1556 |
|
| 1557 |
INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); |
| 1558 |
|
| 1559 |
if (adapter->rx_work_enabled) { |
| 1560 |
adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE", |
| 1561 |
WQ_HIGHPRI | |
| 1562 |
WQ_MEM_RECLAIM | |
| 1563 |
WQ_UNBOUND, 0); |
| 1564 |
if (!adapter->rx_workqueue) |
| 1565 |
goto err_kmalloc; |
| 1566 |
INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue); |
| 1567 |
} |
| 1568 |
|
| 1569 |
if (adapter->host_mlme_enabled) { |
| 1570 |
adapter->host_mlme_workqueue = |
| 1571 |
alloc_workqueue("MWIFIEX_HOST_MLME_WORK_QUEUE", |
| 1572 |
WQ_HIGHPRI | |
| 1573 |
WQ_MEM_RECLAIM | |
| 1574 |
WQ_UNBOUND, 0); |
| 1575 |
if (!adapter->host_mlme_workqueue) |
| 1576 |
goto err_kmalloc; |
| 1577 |
INIT_WORK(&adapter->host_mlme_work, |
| 1578 |
mwifiex_host_mlme_work_queue); |
| 1579 |
} |
| 1580 |
|
| 1581 |
/* Register the device. Fill up the private data structure with |
| 1582 |
* relevant information from the card. Some code extracted from |
| 1583 |
* mwifiex_register_dev() |
| 1584 |
*/ |
| 1585 |
mwifiex_dbg(adapter, INFO, "%s, mwifiex_init_hw_fw()...\n", __func__); |
| 1586 |
|
| 1587 |
if (mwifiex_init_hw_fw(adapter, false)) { |
| 1588 |
mwifiex_dbg(adapter, ERROR, |
| 1589 |
"%s: firmware init failed\n", __func__); |
| 1590 |
goto err_init_fw; |
| 1591 |
} |
| 1592 |
|
| 1593 |
/* _mwifiex_fw_dpc() does its own cleanup */ |
| 1594 |
ret = _mwifiex_fw_dpc(adapter->firmware, adapter); |
| 1595 |
if (ret) { |
| 1596 |
pr_err("Failed to bring up adapter: %d\n", ret); |
| 1597 |
return ret; |
| 1598 |
} |
| 1599 |
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__); |
| 1600 |
|
| 1601 |
return 0; |
| 1602 |
|
| 1603 |
err_init_fw: |
| 1604 |
mwifiex_dbg(adapter, ERROR, "info: %s: unregister device\n", __func__); |
| 1605 |
if (adapter->if_ops.unregister_dev) |
| 1606 |
adapter->if_ops.unregister_dev(adapter); |
| 1607 |
|
| 1608 |
err_kmalloc: |
| 1609 |
set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 1610 |
mwifiex_terminate_workqueue(adapter); |
| 1611 |
if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { |
| 1612 |
mwifiex_dbg(adapter, ERROR, |
| 1613 |
"info: %s: shutdown mwifiex\n", __func__); |
| 1614 |
mwifiex_shutdown_drv(adapter); |
| 1615 |
mwifiex_free_cmd_buffers(adapter); |
| 1616 |
} |
| 1617 |
|
| 1618 |
complete_all(adapter->fw_done); |
| 1619 |
mwifiex_dbg(adapter, INFO, "%s, error\n", __func__); |
| 1620 |
|
| 1621 |
return -1; |
| 1622 |
} |
| 1623 |
EXPORT_SYMBOL_GPL(mwifiex_reinit_sw); |
| 1624 |
|
| 1625 |
static irqreturn_t mwifiex_irq_wakeup_handler(int irq, void *priv) |
| 1626 |
{ |
| 1627 |
struct mwifiex_adapter *adapter = priv; |
| 1628 |
|
| 1629 |
dev_dbg(adapter->dev, "%s: wake by wifi", __func__); |
| 1630 |
adapter->wake_by_wifi = true; |
| 1631 |
disable_irq_nosync(irq); |
| 1632 |
|
| 1633 |
/* Notify PM core we are wakeup source */ |
| 1634 |
pm_wakeup_event(adapter->dev, 0); |
| 1635 |
pm_system_wakeup(); |
| 1636 |
|
| 1637 |
return IRQ_HANDLED; |
| 1638 |
} |
| 1639 |
|
| 1640 |
static void mwifiex_probe_of(struct mwifiex_adapter *adapter) |
| 1641 |
{ |
| 1642 |
int ret; |
| 1643 |
struct device *dev = adapter->dev; |
| 1644 |
|
| 1645 |
if (!dev->of_node) |
| 1646 |
goto err_exit; |
| 1647 |
|
| 1648 |
adapter->dt_node = dev->of_node; |
| 1649 |
adapter->irq_wakeup = irq_of_parse_and_map(adapter->dt_node, 0); |
| 1650 |
if (!adapter->irq_wakeup) { |
| 1651 |
dev_dbg(dev, "fail to parse irq_wakeup from device tree\n"); |
| 1652 |
goto err_exit; |
| 1653 |
} |
| 1654 |
|
| 1655 |
ret = devm_request_irq(dev, adapter->irq_wakeup, |
| 1656 |
mwifiex_irq_wakeup_handler, |
| 1657 |
IRQF_TRIGGER_LOW | IRQF_NO_AUTOEN, |
| 1658 |
"wifi_wake", adapter); |
| 1659 |
if (ret) { |
| 1660 |
dev_err(dev, "Failed to request irq_wakeup %d (%d)\n", |
| 1661 |
adapter->irq_wakeup, ret); |
| 1662 |
goto err_exit; |
| 1663 |
} |
| 1664 |
|
| 1665 |
if (device_init_wakeup(dev, true)) { |
| 1666 |
dev_err(dev, "fail to init wakeup for mwifiex\n"); |
| 1667 |
goto err_exit; |
| 1668 |
} |
| 1669 |
return; |
| 1670 |
|
| 1671 |
err_exit: |
| 1672 |
adapter->irq_wakeup = -1; |
| 1673 |
} |
| 1674 |
|
| 1675 |
/* |
| 1676 |
* This function adds the card. |
| 1677 |
* |
| 1678 |
* This function follows the following major steps to set up the device - |
| 1679 |
* - Initialize software. This includes probing the card, registering |
| 1680 |
* the interface operations table, and allocating/initializing the |
| 1681 |
* adapter structure |
| 1682 |
* - Set up the netlink socket |
| 1683 |
* - Create and start the main work queue |
| 1684 |
* - Register the device |
| 1685 |
* - Initialize firmware and hardware |
| 1686 |
* - Add logical interfaces |
| 1687 |
*/ |
| 1688 |
int |
| 1689 |
mwifiex_add_card(void *card, struct completion *fw_done, |
| 1690 |
const struct mwifiex_if_ops *if_ops, u8 iface_type, |
| 1691 |
struct device *dev) |
| 1692 |
{ |
| 1693 |
struct mwifiex_adapter *adapter; |
| 1694 |
|
| 1695 |
if (mwifiex_register(card, dev, if_ops, (void **)&adapter)) { |
| 1696 |
pr_err("%s: software init failed\n", __func__); |
| 1697 |
goto err_init_sw; |
| 1698 |
} |
| 1699 |
|
| 1700 |
mwifiex_probe_of(adapter); |
| 1701 |
|
| 1702 |
adapter->iface_type = iface_type; |
| 1703 |
adapter->fw_done = fw_done; |
| 1704 |
|
| 1705 |
adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; |
| 1706 |
clear_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 1707 |
clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| 1708 |
adapter->hs_activated = false; |
| 1709 |
init_waitqueue_head(&adapter->hs_activate_wait_q); |
| 1710 |
init_waitqueue_head(&adapter->cmd_wait_q.wait); |
| 1711 |
adapter->cmd_wait_q.status = 0; |
| 1712 |
adapter->scan_wait_q_woken = false; |
| 1713 |
|
| 1714 |
if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB) |
| 1715 |
adapter->rx_work_enabled = true; |
| 1716 |
|
| 1717 |
adapter->workqueue = |
| 1718 |
alloc_workqueue("MWIFIEX_WORK_QUEUE", |
| 1719 |
WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 0); |
| 1720 |
if (!adapter->workqueue) |
| 1721 |
goto err_kmalloc; |
| 1722 |
|
| 1723 |
INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); |
| 1724 |
|
| 1725 |
if (adapter->rx_work_enabled) { |
| 1726 |
adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE", |
| 1727 |
WQ_HIGHPRI | |
| 1728 |
WQ_MEM_RECLAIM | |
| 1729 |
WQ_UNBOUND, 0); |
| 1730 |
if (!adapter->rx_workqueue) |
| 1731 |
goto err_kmalloc; |
| 1732 |
|
| 1733 |
INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue); |
| 1734 |
} |
| 1735 |
|
| 1736 |
/* Register the device. Fill up the private data structure with relevant |
| 1737 |
information from the card. */ |
| 1738 |
if (adapter->if_ops.register_dev(adapter)) { |
| 1739 |
pr_err("%s: failed to register mwifiex device\n", __func__); |
| 1740 |
goto err_registerdev; |
| 1741 |
} |
| 1742 |
|
| 1743 |
if (adapter->host_mlme_enabled) { |
| 1744 |
adapter->host_mlme_workqueue = |
| 1745 |
alloc_workqueue("MWIFIEX_HOST_MLME_WORK_QUEUE", |
| 1746 |
WQ_HIGHPRI | |
| 1747 |
WQ_MEM_RECLAIM | |
| 1748 |
WQ_UNBOUND, 0); |
| 1749 |
if (!adapter->host_mlme_workqueue) |
| 1750 |
goto err_kmalloc; |
| 1751 |
INIT_WORK(&adapter->host_mlme_work, |
| 1752 |
mwifiex_host_mlme_work_queue); |
| 1753 |
} |
| 1754 |
|
| 1755 |
if (mwifiex_init_hw_fw(adapter, true)) { |
| 1756 |
pr_err("%s: firmware init failed\n", __func__); |
| 1757 |
goto err_init_fw; |
| 1758 |
} |
| 1759 |
|
| 1760 |
return 0; |
| 1761 |
|
| 1762 |
err_init_fw: |
| 1763 |
pr_debug("info: %s: unregister device\n", __func__); |
| 1764 |
if (adapter->if_ops.unregister_dev) |
| 1765 |
adapter->if_ops.unregister_dev(adapter); |
| 1766 |
err_registerdev: |
| 1767 |
set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| 1768 |
mwifiex_terminate_workqueue(adapter); |
| 1769 |
if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { |
| 1770 |
pr_debug("info: %s: shutdown mwifiex\n", __func__); |
| 1771 |
mwifiex_shutdown_drv(adapter); |
| 1772 |
mwifiex_free_cmd_buffers(adapter); |
| 1773 |
} |
| 1774 |
err_kmalloc: |
| 1775 |
if (adapter->irq_wakeup >= 0) |
| 1776 |
device_init_wakeup(adapter->dev, false); |
| 1777 |
mwifiex_free_adapter(adapter); |
| 1778 |
|
| 1779 |
err_init_sw: |
| 1780 |
|
| 1781 |
return -1; |
| 1782 |
} |
| 1783 |
EXPORT_SYMBOL_GPL(mwifiex_add_card); |
| 1784 |
|
| 1785 |
/* |
| 1786 |
* This function removes the card. |
| 1787 |
* |
| 1788 |
* This function follows the following major steps to remove the device - |
| 1789 |
* - Stop data traffic |
| 1790 |
* - Shutdown firmware |
| 1791 |
* - Remove the logical interfaces |
| 1792 |
* - Terminate the work queue |
| 1793 |
* - Unregister the device |
| 1794 |
* - Free the adapter structure |
| 1795 |
*/ |
| 1796 |
int mwifiex_remove_card(struct mwifiex_adapter *adapter) |
| 1797 |
{ |
| 1798 |
if (!adapter) |
| 1799 |
return 0; |
| 1800 |
|
| 1801 |
if (adapter->is_up) |
| 1802 |
mwifiex_uninit_sw(adapter); |
| 1803 |
|
| 1804 |
if (adapter->irq_wakeup >= 0) |
| 1805 |
device_init_wakeup(adapter->dev, false); |
| 1806 |
|
| 1807 |
/* Unregister device */ |
| 1808 |
mwifiex_dbg(adapter, INFO, |
| 1809 |
"info: unregister device\n"); |
| 1810 |
if (adapter->if_ops.unregister_dev) |
| 1811 |
adapter->if_ops.unregister_dev(adapter); |
| 1812 |
/* Free adapter structure */ |
| 1813 |
mwifiex_dbg(adapter, INFO, |
| 1814 |
"info: free adapter\n"); |
| 1815 |
mwifiex_free_adapter(adapter); |
| 1816 |
|
| 1817 |
return 0; |
| 1818 |
} |
| 1819 |
EXPORT_SYMBOL_GPL(mwifiex_remove_card); |
| 1820 |
|
| 1821 |
void _mwifiex_dbg(const struct mwifiex_adapter *adapter, int mask, |
| 1822 |
const char *fmt, ...) |
| 1823 |
{ |
| 1824 |
struct va_format vaf; |
| 1825 |
va_list args; |
| 1826 |
|
| 1827 |
if (!(adapter->debug_mask & mask)) |
| 1828 |
return; |
| 1829 |
|
| 1830 |
va_start(args, fmt); |
| 1831 |
|
| 1832 |
vaf.fmt = fmt; |
| 1833 |
vaf.va = &args; |
| 1834 |
|
| 1835 |
if (adapter->dev) |
| 1836 |
dev_info(adapter->dev, "%pV", &vaf); |
| 1837 |
else |
| 1838 |
pr_info("%pV", &vaf); |
| 1839 |
|
| 1840 |
va_end(args); |
| 1841 |
} |
| 1842 |
EXPORT_SYMBOL_GPL(_mwifiex_dbg); |
| 1843 |
|
| 1844 |
/* |
| 1845 |
* This function initializes the module. |
| 1846 |
* |
| 1847 |
* The debug FS is also initialized if configured. |
| 1848 |
*/ |
| 1849 |
static int |
| 1850 |
mwifiex_init_module(void) |
| 1851 |
{ |
| 1852 |
#ifdef CONFIG_DEBUG_FS |
| 1853 |
mwifiex_debugfs_init(); |
| 1854 |
#endif |
| 1855 |
return 0; |
| 1856 |
} |
| 1857 |
|
| 1858 |
/* |
| 1859 |
* This function cleans up the module. |
| 1860 |
* |
| 1861 |
* The debug FS is removed if available. |
| 1862 |
*/ |
| 1863 |
static void |
| 1864 |
mwifiex_cleanup_module(void) |
| 1865 |
{ |
| 1866 |
#ifdef CONFIG_DEBUG_FS |
| 1867 |
mwifiex_debugfs_remove(); |
| 1868 |
#endif |
| 1869 |
} |
| 1870 |
|
| 1871 |
module_init(mwifiex_init_module); |
| 1872 |
module_exit(mwifiex_cleanup_module); |
| 1873 |
|
| 1874 |
MODULE_AUTHOR("Marvell International Ltd."); |
| 1875 |
MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION); |
| 1876 |
MODULE_VERSION(VERSION); |
| 1877 |
MODULE_LICENSE("GPL v2"); |