| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef B43_PHY_HT_H_ |
| 3 |
#define B43_PHY_HT_H_ |
| 4 |
|
| 5 |
#include "phy_common.h" |
| 6 |
|
| 7 |
|
| 8 |
#define B43_PHY_HT_BBCFG 0x001 /* BB config */ |
| 9 |
#define B43_PHY_HT_BBCFG_RSTCCA 0x4000 /* Reset CCA */ |
| 10 |
#define B43_PHY_HT_BBCFG_RSTRX 0x8000 /* Reset RX */ |
| 11 |
#define B43_PHY_HT_BANDCTL 0x009 /* Band control */ |
| 12 |
#define B43_PHY_HT_BANDCTL_5GHZ 0x0001 /* Use the 5GHz band */ |
| 13 |
#define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */ |
| 14 |
#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */ |
| 15 |
#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */ |
| 16 |
#define B43_PHY_HT_CLASS_CTL 0x0B0 /* Classifier control */ |
| 17 |
#define B43_PHY_HT_CLASS_CTL_CCK_EN 0x0001 /* CCK enable */ |
| 18 |
#define B43_PHY_HT_CLASS_CTL_OFDM_EN 0x0002 /* OFDM enable */ |
| 19 |
#define B43_PHY_HT_CLASS_CTL_WAITED_EN 0x0004 /* Waited enable */ |
| 20 |
#define B43_PHY_HT_IQLOCAL_CMDGCTL 0x0C2 /* I/Q LO cal command G control */ |
| 21 |
#define B43_PHY_HT_SAMP_CMD 0x0C3 /* Sample command */ |
| 22 |
#define B43_PHY_HT_SAMP_CMD_STOP 0x0002 /* Stop */ |
| 23 |
#define B43_PHY_HT_SAMP_LOOP_CNT 0x0C4 /* Sample loop count */ |
| 24 |
#define B43_PHY_HT_SAMP_WAIT_CNT 0x0C5 /* Sample wait count */ |
| 25 |
#define B43_PHY_HT_SAMP_DEP_CNT 0x0C6 /* Sample depth count */ |
| 26 |
#define B43_PHY_HT_SAMP_STAT 0x0C7 /* Sample status */ |
| 27 |
#define B43_PHY_HT_EST_PWR_C1 0x118 |
| 28 |
#define B43_PHY_HT_EST_PWR_C2 0x119 |
| 29 |
#define B43_PHY_HT_EST_PWR_C3 0x11A |
| 30 |
#define B43_PHY_HT_TSSIMODE 0x122 /* TSSI mode */ |
| 31 |
#define B43_PHY_HT_TSSIMODE_EN 0x0001 /* TSSI enable */ |
| 32 |
#define B43_PHY_HT_TSSIMODE_PDEN 0x0002 /* Power det enable */ |
| 33 |
#define B43_PHY_HT_BW1 0x1CE |
| 34 |
#define B43_PHY_HT_BW2 0x1CF |
| 35 |
#define B43_PHY_HT_BW3 0x1D0 |
| 36 |
#define B43_PHY_HT_BW4 0x1D1 |
| 37 |
#define B43_PHY_HT_BW5 0x1D2 |
| 38 |
#define B43_PHY_HT_BW6 0x1D3 |
| 39 |
#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */ |
| 40 |
#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */ |
| 41 |
#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */ |
| 42 |
#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */ |
| 43 |
#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */ |
| 44 |
#define B43_PHY_HT_TXPCTL_N 0x1E8 /* TX power control N num */ |
| 45 |
#define B43_PHY_HT_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */ |
| 46 |
#define B43_PHY_HT_TXPCTL_N_TSSID_SHIFT 0 |
| 47 |
#define B43_PHY_HT_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */ |
| 48 |
#define B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT 8 |
| 49 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI 0x1E9 /* TX power control idle TSSI */ |
| 50 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1 0x003F |
| 51 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT 0 |
| 52 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2 0x3F00 |
| 53 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT 8 |
| 54 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF 0x8000 /* Raw TSSI offset bin format */ |
| 55 |
#define B43_PHY_HT_TXPCTL_TARG_PWR 0x1EA /* TX power control target power */ |
| 56 |
#define B43_PHY_HT_TXPCTL_TARG_PWR_C1 0x00FF /* Power 0 */ |
| 57 |
#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT 0 |
| 58 |
#define B43_PHY_HT_TXPCTL_TARG_PWR_C2 0xFF00 /* Power 1 */ |
| 59 |
#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT 8 |
| 60 |
#define B43_PHY_HT_TX_PCTL_STATUS_C1 0x1ED |
| 61 |
#define B43_PHY_HT_TX_PCTL_STATUS_C2 0x1EE |
| 62 |
#define B43_PHY_HT_TXPCTL_CMD_C2 0x222 |
| 63 |
#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F |
| 64 |
#define B43_PHY_HT_RSSI_C1 0x219 |
| 65 |
#define B43_PHY_HT_RSSI_C2 0x21A |
| 66 |
#define B43_PHY_HT_RSSI_C3 0x21B |
| 67 |
|
| 68 |
#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E) |
| 69 |
#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E) |
| 70 |
#define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E) |
| 71 |
|
| 72 |
#define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000) |
| 73 |
#define B43_PHY_HT_RF_SEQ_MODE_CA_OVER 0x0001 /* Core active override */ |
| 74 |
#define B43_PHY_HT_RF_SEQ_MODE_TR_OVER 0x0002 /* Trigger override */ |
| 75 |
#define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003) |
| 76 |
#define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */ |
| 77 |
#define B43_PHY_HT_RF_SEQ_TRIG_TX2RX 0x0002 /* TX2RX */ |
| 78 |
#define B43_PHY_HT_RF_SEQ_TRIG_UPGH 0x0004 /* Update gain H */ |
| 79 |
#define B43_PHY_HT_RF_SEQ_TRIG_UPGL 0x0008 /* Update gain L */ |
| 80 |
#define B43_PHY_HT_RF_SEQ_TRIG_UPGU 0x0010 /* Update gain U */ |
| 81 |
#define B43_PHY_HT_RF_SEQ_TRIG_RST2RX 0x0020 /* Reset to RX */ |
| 82 |
#define B43_PHY_HT_RF_SEQ_STATUS B43_PHY_EXTG(0x004) |
| 83 |
/* Values for the status are the same as for the trigger */ |
| 84 |
|
| 85 |
#define B43_PHY_HT_RF_CTL_CMD 0x810 |
| 86 |
#define B43_PHY_HT_RF_CTL_CMD_FORCE 0x0001 |
| 87 |
#define B43_PHY_HT_RF_CTL_CMD_CHIP0_PU 0x0002 |
| 88 |
|
| 89 |
#define B43_PHY_HT_RF_CTL_INT_C1 B43_PHY_EXTG(0x04c) |
| 90 |
#define B43_PHY_HT_RF_CTL_INT_C2 B43_PHY_EXTG(0x06c) |
| 91 |
#define B43_PHY_HT_RF_CTL_INT_C3 B43_PHY_EXTG(0x08c) |
| 92 |
|
| 93 |
#define B43_PHY_HT_AFE_C1_OVER B43_PHY_EXTG(0x110) |
| 94 |
#define B43_PHY_HT_AFE_C1 B43_PHY_EXTG(0x111) |
| 95 |
#define B43_PHY_HT_AFE_C2_OVER B43_PHY_EXTG(0x114) |
| 96 |
#define B43_PHY_HT_AFE_C2 B43_PHY_EXTG(0x115) |
| 97 |
#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118) |
| 98 |
#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119) |
| 99 |
|
| 100 |
#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164) |
| 101 |
#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F |
| 102 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2 B43_PHY_EXTG(0x165) /* TX power control idle TSSI */ |
| 103 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3 0x003F |
| 104 |
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT 0 |
| 105 |
#define B43_PHY_HT_TXPCTL_TARG_PWR2 B43_PHY_EXTG(0x166) /* TX power control target power */ |
| 106 |
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3 0x00FF |
| 107 |
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT 0 |
| 108 |
#define B43_PHY_HT_TX_PCTL_STATUS_C3 B43_PHY_EXTG(0x169) |
| 109 |
|
| 110 |
#define B43_PHY_B_BBCFG B43_PHY_N_BMODE(0x001) |
| 111 |
#define B43_PHY_B_BBCFG_RSTCCA 0x4000 /* Reset CCA */ |
| 112 |
#define B43_PHY_B_BBCFG_RSTRX 0x8000 /* Reset RX */ |
| 113 |
#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A) |
| 114 |
|
| 115 |
|
| 116 |
/* Values for PHY registers used on channel switching */ |
| 117 |
struct b43_phy_ht_channeltab_e_phy { |
| 118 |
u16 bw1; |
| 119 |
u16 bw2; |
| 120 |
u16 bw3; |
| 121 |
u16 bw4; |
| 122 |
u16 bw5; |
| 123 |
u16 bw6; |
| 124 |
}; |
| 125 |
|
| 126 |
|
| 127 |
struct b43_phy_ht { |
| 128 |
u16 rf_ctl_int_save[3]; |
| 129 |
|
| 130 |
bool tx_pwr_ctl; |
| 131 |
u8 tx_pwr_idx[3]; |
| 132 |
|
| 133 |
s32 bb_mult_save[3]; |
| 134 |
|
| 135 |
u8 idle_tssi[3]; |
| 136 |
}; |
| 137 |
|
| 138 |
|
| 139 |
struct b43_phy_operations; |
| 140 |
extern const struct b43_phy_operations b43_phyops_ht; |
| 141 |
|
| 142 |
#endif /* B43_PHY_HT_H_ */ |