| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
|
| 4 |
Broadcom B43 wireless driver |
| 5 |
IEEE 802.11n HT-PHY support |
| 6 |
|
| 7 |
Copyright (c) 2011 Rafał Miłecki <[email protected]> |
| 8 |
|
| 9 |
|
| 10 |
*/ |
| 11 |
|
| 12 |
#include <linux/slab.h> |
| 13 |
|
| 14 |
#include "b43.h" |
| 15 |
#include "phy_ht.h" |
| 16 |
#include "tables_phy_ht.h" |
| 17 |
#include "radio_2059.h" |
| 18 |
#include "main.h" |
| 19 |
|
| 20 |
/* Force values to keep compatibility with wl */ |
| 21 |
enum ht_rssi_type { |
| 22 |
HT_RSSI_W1 = 0, |
| 23 |
HT_RSSI_W2 = 1, |
| 24 |
HT_RSSI_NB = 2, |
| 25 |
HT_RSSI_IQ = 3, |
| 26 |
HT_RSSI_TSSI_2G = 4, |
| 27 |
HT_RSSI_TSSI_5G = 5, |
| 28 |
HT_RSSI_TBD = 6, |
| 29 |
}; |
| 30 |
|
| 31 |
/************************************************** |
| 32 |
* Radio 2059. |
| 33 |
**************************************************/ |
| 34 |
|
| 35 |
static void b43_radio_2059_channel_setup(struct b43_wldev *dev, |
| 36 |
const struct b43_phy_ht_channeltab_e_radio2059 *e) |
| 37 |
{ |
| 38 |
static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| 39 |
u16 r; |
| 40 |
int core; |
| 41 |
|
| 42 |
b43_radio_write(dev, 0x16, e->radio_syn16); |
| 43 |
b43_radio_write(dev, 0x17, e->radio_syn17); |
| 44 |
b43_radio_write(dev, 0x22, e->radio_syn22); |
| 45 |
b43_radio_write(dev, 0x25, e->radio_syn25); |
| 46 |
b43_radio_write(dev, 0x27, e->radio_syn27); |
| 47 |
b43_radio_write(dev, 0x28, e->radio_syn28); |
| 48 |
b43_radio_write(dev, 0x29, e->radio_syn29); |
| 49 |
b43_radio_write(dev, 0x2c, e->radio_syn2c); |
| 50 |
b43_radio_write(dev, 0x2d, e->radio_syn2d); |
| 51 |
b43_radio_write(dev, 0x37, e->radio_syn37); |
| 52 |
b43_radio_write(dev, 0x41, e->radio_syn41); |
| 53 |
b43_radio_write(dev, 0x43, e->radio_syn43); |
| 54 |
b43_radio_write(dev, 0x47, e->radio_syn47); |
| 55 |
|
| 56 |
for (core = 0; core < 3; core++) { |
| 57 |
r = routing[core]; |
| 58 |
b43_radio_write(dev, r | 0x4a, e->radio_rxtx4a); |
| 59 |
b43_radio_write(dev, r | 0x58, e->radio_rxtx58); |
| 60 |
b43_radio_write(dev, r | 0x5a, e->radio_rxtx5a); |
| 61 |
b43_radio_write(dev, r | 0x6a, e->radio_rxtx6a); |
| 62 |
b43_radio_write(dev, r | 0x6d, e->radio_rxtx6d); |
| 63 |
b43_radio_write(dev, r | 0x6e, e->radio_rxtx6e); |
| 64 |
b43_radio_write(dev, r | 0x92, e->radio_rxtx92); |
| 65 |
b43_radio_write(dev, r | 0x98, e->radio_rxtx98); |
| 66 |
} |
| 67 |
|
| 68 |
udelay(50); |
| 69 |
|
| 70 |
/* Calibration */ |
| 71 |
b43_radio_mask(dev, R2059_RFPLL_MISC_EN, ~0x1); |
| 72 |
b43_radio_mask(dev, R2059_RFPLL_MISC_CAL_RESETN, ~0x4); |
| 73 |
b43_radio_set(dev, R2059_RFPLL_MISC_CAL_RESETN, 0x4); |
| 74 |
b43_radio_set(dev, R2059_RFPLL_MISC_EN, 0x1); |
| 75 |
|
| 76 |
udelay(300); |
| 77 |
} |
| 78 |
|
| 79 |
/* Calibrate resistors in LPF of PLL? */ |
| 80 |
static void b43_radio_2059_rcal(struct b43_wldev *dev) |
| 81 |
{ |
| 82 |
/* Enable */ |
| 83 |
b43_radio_set(dev, R2059_C3 | R2059_RCAL_CONFIG, 0x1); |
| 84 |
usleep_range(10, 20); |
| 85 |
|
| 86 |
b43_radio_set(dev, R2059_C3 | 0x0BF, 0x1); |
| 87 |
b43_radio_maskset(dev, R2059_C3 | 0x19B, 0x3, 0x2); |
| 88 |
|
| 89 |
/* Start */ |
| 90 |
b43_radio_set(dev, R2059_C3 | R2059_RCAL_CONFIG, 0x2); |
| 91 |
usleep_range(100, 200); |
| 92 |
|
| 93 |
/* Stop */ |
| 94 |
b43_radio_mask(dev, R2059_C3 | R2059_RCAL_CONFIG, ~0x2); |
| 95 |
|
| 96 |
if (!b43_radio_wait_value(dev, R2059_C3 | R2059_RCAL_STATUS, 1, 1, 100, |
| 97 |
1000000)) |
| 98 |
b43err(dev->wl, "Radio 0x2059 rcal timeout\n"); |
| 99 |
|
| 100 |
/* Disable */ |
| 101 |
b43_radio_mask(dev, R2059_C3 | R2059_RCAL_CONFIG, ~0x1); |
| 102 |
|
| 103 |
b43_radio_set(dev, 0xa, 0x60); |
| 104 |
} |
| 105 |
|
| 106 |
/* Calibrate the internal RC oscillator? */ |
| 107 |
static void b43_radio_2057_rccal(struct b43_wldev *dev) |
| 108 |
{ |
| 109 |
static const u16 radio_values[3][2] = { |
| 110 |
{ 0x61, 0xE9 }, { 0x69, 0xD5 }, { 0x73, 0x99 }, |
| 111 |
}; |
| 112 |
int i; |
| 113 |
|
| 114 |
for (i = 0; i < 3; i++) { |
| 115 |
b43_radio_write(dev, R2059_RCCAL_MASTER, radio_values[i][0]); |
| 116 |
b43_radio_write(dev, R2059_RCCAL_X1, 0x6E); |
| 117 |
b43_radio_write(dev, R2059_RCCAL_TRC0, radio_values[i][1]); |
| 118 |
|
| 119 |
/* Start */ |
| 120 |
b43_radio_write(dev, R2059_RCCAL_START_R1_Q1_P1, 0x55); |
| 121 |
|
| 122 |
/* Wait */ |
| 123 |
if (!b43_radio_wait_value(dev, R2059_RCCAL_DONE_OSCCAP, 2, 2, |
| 124 |
500, 5000000)) |
| 125 |
b43err(dev->wl, "Radio 0x2059 rccal timeout\n"); |
| 126 |
|
| 127 |
/* Stop */ |
| 128 |
b43_radio_write(dev, R2059_RCCAL_START_R1_Q1_P1, 0x15); |
| 129 |
} |
| 130 |
|
| 131 |
b43_radio_mask(dev, R2059_RCCAL_MASTER, ~0x1); |
| 132 |
} |
| 133 |
|
| 134 |
static void b43_radio_2059_init_pre(struct b43_wldev *dev) |
| 135 |
{ |
| 136 |
b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, ~B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| 137 |
b43_phy_set(dev, B43_PHY_HT_RF_CTL_CMD, B43_PHY_HT_RF_CTL_CMD_FORCE); |
| 138 |
b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, ~B43_PHY_HT_RF_CTL_CMD_FORCE); |
| 139 |
b43_phy_set(dev, B43_PHY_HT_RF_CTL_CMD, B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| 140 |
} |
| 141 |
|
| 142 |
static void b43_radio_2059_init(struct b43_wldev *dev) |
| 143 |
{ |
| 144 |
static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3 }; |
| 145 |
int i; |
| 146 |
|
| 147 |
/* Prepare (reset?) radio */ |
| 148 |
b43_radio_2059_init_pre(dev); |
| 149 |
|
| 150 |
r2059_upload_inittabs(dev); |
| 151 |
|
| 152 |
for (i = 0; i < ARRAY_SIZE(routing); i++) |
| 153 |
b43_radio_set(dev, routing[i] | 0x146, 0x3); |
| 154 |
|
| 155 |
/* Post init starts below */ |
| 156 |
|
| 157 |
b43_radio_set(dev, R2059_RFPLL_MISC_CAL_RESETN, 0x0078); |
| 158 |
b43_radio_set(dev, R2059_XTAL_CONFIG2, 0x0080); |
| 159 |
msleep(2); |
| 160 |
b43_radio_mask(dev, R2059_RFPLL_MISC_CAL_RESETN, ~0x0078); |
| 161 |
b43_radio_mask(dev, R2059_XTAL_CONFIG2, ~0x0080); |
| 162 |
|
| 163 |
if (1) { /* FIXME */ |
| 164 |
b43_radio_2059_rcal(dev); |
| 165 |
b43_radio_2057_rccal(dev); |
| 166 |
} |
| 167 |
|
| 168 |
b43_radio_mask(dev, R2059_RFPLL_MASTER, ~0x0008); |
| 169 |
} |
| 170 |
|
| 171 |
/************************************************** |
| 172 |
* RF |
| 173 |
**************************************************/ |
| 174 |
|
| 175 |
static void b43_phy_ht_force_rf_sequence(struct b43_wldev *dev, u16 rf_seq) |
| 176 |
{ |
| 177 |
u8 i; |
| 178 |
|
| 179 |
u16 save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE); |
| 180 |
b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, 0x3); |
| 181 |
|
| 182 |
b43_phy_set(dev, B43_PHY_HT_RF_SEQ_TRIG, rf_seq); |
| 183 |
for (i = 0; i < 200; i++) { |
| 184 |
if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & rf_seq)) { |
| 185 |
i = 0; |
| 186 |
break; |
| 187 |
} |
| 188 |
msleep(1); |
| 189 |
} |
| 190 |
if (i) |
| 191 |
b43err(dev->wl, "Forcing RF sequence timeout\n"); |
| 192 |
|
| 193 |
b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode); |
| 194 |
} |
| 195 |
|
| 196 |
static void b43_phy_ht_pa_override(struct b43_wldev *dev, bool enable) |
| 197 |
{ |
| 198 |
struct b43_phy_ht *htphy = dev->phy.ht; |
| 199 |
static const u16 regs[3] = { B43_PHY_HT_RF_CTL_INT_C1, |
| 200 |
B43_PHY_HT_RF_CTL_INT_C2, |
| 201 |
B43_PHY_HT_RF_CTL_INT_C3 }; |
| 202 |
int i; |
| 203 |
|
| 204 |
if (enable) { |
| 205 |
for (i = 0; i < 3; i++) |
| 206 |
b43_phy_write(dev, regs[i], htphy->rf_ctl_int_save[i]); |
| 207 |
} else { |
| 208 |
for (i = 0; i < 3; i++) |
| 209 |
htphy->rf_ctl_int_save[i] = b43_phy_read(dev, regs[i]); |
| 210 |
/* TODO: Does 5GHz band use different value (not 0x0400)? */ |
| 211 |
for (i = 0; i < 3; i++) |
| 212 |
b43_phy_write(dev, regs[i], 0x0400); |
| 213 |
} |
| 214 |
} |
| 215 |
|
| 216 |
/************************************************** |
| 217 |
* Various PHY ops |
| 218 |
**************************************************/ |
| 219 |
|
| 220 |
static u16 b43_phy_ht_classifier(struct b43_wldev *dev, u16 mask, u16 val) |
| 221 |
{ |
| 222 |
u16 tmp; |
| 223 |
u16 allowed = B43_PHY_HT_CLASS_CTL_CCK_EN | |
| 224 |
B43_PHY_HT_CLASS_CTL_OFDM_EN | |
| 225 |
B43_PHY_HT_CLASS_CTL_WAITED_EN; |
| 226 |
|
| 227 |
tmp = b43_phy_read(dev, B43_PHY_HT_CLASS_CTL); |
| 228 |
tmp &= allowed; |
| 229 |
tmp &= ~mask; |
| 230 |
tmp |= (val & mask); |
| 231 |
b43_phy_maskset(dev, B43_PHY_HT_CLASS_CTL, ~allowed, tmp); |
| 232 |
|
| 233 |
return tmp; |
| 234 |
} |
| 235 |
|
| 236 |
static void b43_phy_ht_reset_cca(struct b43_wldev *dev) |
| 237 |
{ |
| 238 |
u16 bbcfg; |
| 239 |
|
| 240 |
b43_phy_force_clock(dev, true); |
| 241 |
bbcfg = b43_phy_read(dev, B43_PHY_HT_BBCFG); |
| 242 |
b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg | B43_PHY_HT_BBCFG_RSTCCA); |
| 243 |
udelay(1); |
| 244 |
b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg & ~B43_PHY_HT_BBCFG_RSTCCA); |
| 245 |
b43_phy_force_clock(dev, false); |
| 246 |
|
| 247 |
b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RST2RX); |
| 248 |
} |
| 249 |
|
| 250 |
static void b43_phy_ht_zero_extg(struct b43_wldev *dev) |
| 251 |
{ |
| 252 |
u8 i, j; |
| 253 |
static const u16 base[] = { 0x40, 0x60, 0x80 }; |
| 254 |
|
| 255 |
for (i = 0; i < ARRAY_SIZE(base); i++) { |
| 256 |
for (j = 0; j < 4; j++) |
| 257 |
b43_phy_write(dev, B43_PHY_EXTG(base[i] + j), 0); |
| 258 |
} |
| 259 |
|
| 260 |
for (i = 0; i < ARRAY_SIZE(base); i++) |
| 261 |
b43_phy_write(dev, B43_PHY_EXTG(base[i] + 0xc), 0); |
| 262 |
} |
| 263 |
|
| 264 |
/* Some unknown AFE (Analog Frondned) op */ |
| 265 |
static void b43_phy_ht_afe_unk1(struct b43_wldev *dev) |
| 266 |
{ |
| 267 |
u8 i; |
| 268 |
|
| 269 |
static const u16 ctl_regs[3][2] = { |
| 270 |
{ B43_PHY_HT_AFE_C1_OVER, B43_PHY_HT_AFE_C1 }, |
| 271 |
{ B43_PHY_HT_AFE_C2_OVER, B43_PHY_HT_AFE_C2 }, |
| 272 |
{ B43_PHY_HT_AFE_C3_OVER, B43_PHY_HT_AFE_C3}, |
| 273 |
}; |
| 274 |
|
| 275 |
for (i = 0; i < 3; i++) { |
| 276 |
/* TODO: verify masks&sets */ |
| 277 |
b43_phy_set(dev, ctl_regs[i][1], 0x4); |
| 278 |
b43_phy_set(dev, ctl_regs[i][0], 0x4); |
| 279 |
b43_phy_mask(dev, ctl_regs[i][1], ~0x1); |
| 280 |
b43_phy_set(dev, ctl_regs[i][0], 0x1); |
| 281 |
b43_httab_write(dev, B43_HTTAB16(8, 5 + (i * 0x10)), 0); |
| 282 |
b43_phy_mask(dev, ctl_regs[i][0], ~0x4); |
| 283 |
} |
| 284 |
} |
| 285 |
|
| 286 |
static void b43_phy_ht_read_clip_detection(struct b43_wldev *dev, u16 *clip_st) |
| 287 |
{ |
| 288 |
clip_st[0] = b43_phy_read(dev, B43_PHY_HT_C1_CLIP1THRES); |
| 289 |
clip_st[1] = b43_phy_read(dev, B43_PHY_HT_C2_CLIP1THRES); |
| 290 |
clip_st[2] = b43_phy_read(dev, B43_PHY_HT_C3_CLIP1THRES); |
| 291 |
} |
| 292 |
|
| 293 |
static void b43_phy_ht_bphy_init(struct b43_wldev *dev) |
| 294 |
{ |
| 295 |
unsigned int i; |
| 296 |
u16 val; |
| 297 |
|
| 298 |
val = 0x1E1F; |
| 299 |
for (i = 0; i < 16; i++) { |
| 300 |
b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val); |
| 301 |
val -= 0x202; |
| 302 |
} |
| 303 |
val = 0x3E3F; |
| 304 |
for (i = 0; i < 16; i++) { |
| 305 |
b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val); |
| 306 |
val -= 0x202; |
| 307 |
} |
| 308 |
b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668); |
| 309 |
} |
| 310 |
|
| 311 |
static void b43_phy_ht_bphy_reset(struct b43_wldev *dev, bool reset) |
| 312 |
{ |
| 313 |
u16 tmp; |
| 314 |
|
| 315 |
tmp = b43_read16(dev, B43_MMIO_PSM_PHY_HDR); |
| 316 |
b43_write16(dev, B43_MMIO_PSM_PHY_HDR, |
| 317 |
tmp | B43_PSM_HDR_MAC_PHY_FORCE_CLK); |
| 318 |
|
| 319 |
/* Put BPHY in or take it out of the reset */ |
| 320 |
if (reset) |
| 321 |
b43_phy_set(dev, B43_PHY_B_BBCFG, |
| 322 |
B43_PHY_B_BBCFG_RSTCCA | B43_PHY_B_BBCFG_RSTRX); |
| 323 |
else |
| 324 |
b43_phy_mask(dev, B43_PHY_B_BBCFG, |
| 325 |
0xffff & ~(B43_PHY_B_BBCFG_RSTCCA | |
| 326 |
B43_PHY_B_BBCFG_RSTRX)); |
| 327 |
|
| 328 |
b43_write16(dev, B43_MMIO_PSM_PHY_HDR, tmp); |
| 329 |
} |
| 330 |
|
| 331 |
/************************************************** |
| 332 |
* Samples |
| 333 |
**************************************************/ |
| 334 |
|
| 335 |
static void b43_phy_ht_stop_playback(struct b43_wldev *dev) |
| 336 |
{ |
| 337 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 338 |
u16 tmp; |
| 339 |
int i; |
| 340 |
|
| 341 |
tmp = b43_phy_read(dev, B43_PHY_HT_SAMP_STAT); |
| 342 |
if (tmp & 0x1) |
| 343 |
b43_phy_set(dev, B43_PHY_HT_SAMP_CMD, B43_PHY_HT_SAMP_CMD_STOP); |
| 344 |
else if (tmp & 0x2) |
| 345 |
b43_phy_mask(dev, B43_PHY_HT_IQLOCAL_CMDGCTL, 0x7FFF); |
| 346 |
|
| 347 |
b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0x0004); |
| 348 |
|
| 349 |
for (i = 0; i < 3; i++) { |
| 350 |
if (phy_ht->bb_mult_save[i] >= 0) { |
| 351 |
b43_httab_write(dev, B43_HTTAB16(13, 0x63 + i * 4), |
| 352 |
phy_ht->bb_mult_save[i]); |
| 353 |
b43_httab_write(dev, B43_HTTAB16(13, 0x67 + i * 4), |
| 354 |
phy_ht->bb_mult_save[i]); |
| 355 |
} |
| 356 |
} |
| 357 |
} |
| 358 |
|
| 359 |
static u16 b43_phy_ht_load_samples(struct b43_wldev *dev) |
| 360 |
{ |
| 361 |
int i; |
| 362 |
u16 len = 20 << 3; |
| 363 |
|
| 364 |
b43_phy_write(dev, B43_PHY_HT_TABLE_ADDR, 0x4400); |
| 365 |
|
| 366 |
for (i = 0; i < len; i++) { |
| 367 |
b43_phy_write(dev, B43_PHY_HT_TABLE_DATAHI, 0); |
| 368 |
b43_phy_write(dev, B43_PHY_HT_TABLE_DATALO, 0); |
| 369 |
} |
| 370 |
|
| 371 |
return len; |
| 372 |
} |
| 373 |
|
| 374 |
static void b43_phy_ht_run_samples(struct b43_wldev *dev, u16 samps, u16 loops, |
| 375 |
u16 wait) |
| 376 |
{ |
| 377 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 378 |
u16 save_seq_mode; |
| 379 |
int i; |
| 380 |
|
| 381 |
for (i = 0; i < 3; i++) { |
| 382 |
if (phy_ht->bb_mult_save[i] < 0) |
| 383 |
phy_ht->bb_mult_save[i] = b43_httab_read(dev, B43_HTTAB16(13, 0x63 + i * 4)); |
| 384 |
} |
| 385 |
|
| 386 |
b43_phy_write(dev, B43_PHY_HT_SAMP_DEP_CNT, samps - 1); |
| 387 |
if (loops != 0xFFFF) |
| 388 |
loops--; |
| 389 |
b43_phy_write(dev, B43_PHY_HT_SAMP_LOOP_CNT, loops); |
| 390 |
b43_phy_write(dev, B43_PHY_HT_SAMP_WAIT_CNT, wait); |
| 391 |
|
| 392 |
save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE); |
| 393 |
b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, |
| 394 |
B43_PHY_HT_RF_SEQ_MODE_CA_OVER); |
| 395 |
|
| 396 |
/* TODO: find out mask bits! Do we need more function arguments? */ |
| 397 |
b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0); |
| 398 |
b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0); |
| 399 |
b43_phy_mask(dev, B43_PHY_HT_IQLOCAL_CMDGCTL, ~0); |
| 400 |
b43_phy_set(dev, B43_PHY_HT_SAMP_CMD, 0x1); |
| 401 |
|
| 402 |
for (i = 0; i < 100; i++) { |
| 403 |
if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & 1)) { |
| 404 |
i = 0; |
| 405 |
break; |
| 406 |
} |
| 407 |
udelay(10); |
| 408 |
} |
| 409 |
if (i) |
| 410 |
b43err(dev->wl, "run samples timeout\n"); |
| 411 |
|
| 412 |
b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode); |
| 413 |
} |
| 414 |
|
| 415 |
static void b43_phy_ht_tx_tone(struct b43_wldev *dev) |
| 416 |
{ |
| 417 |
u16 samp; |
| 418 |
|
| 419 |
samp = b43_phy_ht_load_samples(dev); |
| 420 |
b43_phy_ht_run_samples(dev, samp, 0xFFFF, 0); |
| 421 |
} |
| 422 |
|
| 423 |
/************************************************** |
| 424 |
* RSSI |
| 425 |
**************************************************/ |
| 426 |
|
| 427 |
static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel, |
| 428 |
enum ht_rssi_type rssi_type) |
| 429 |
{ |
| 430 |
static const u16 ctl_regs[3][2] = { |
| 431 |
{ B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, }, |
| 432 |
{ B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, }, |
| 433 |
{ B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, }, |
| 434 |
}; |
| 435 |
static const u16 radio_r[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| 436 |
int core; |
| 437 |
|
| 438 |
if (core_sel == 0) { |
| 439 |
b43err(dev->wl, "RSSI selection for core off not implemented yet\n"); |
| 440 |
} else { |
| 441 |
for (core = 0; core < 3; core++) { |
| 442 |
/* Check if caller requested a one specific core */ |
| 443 |
if ((core_sel == 1 && core != 0) || |
| 444 |
(core_sel == 2 && core != 1) || |
| 445 |
(core_sel == 3 && core != 2)) |
| 446 |
continue; |
| 447 |
|
| 448 |
switch (rssi_type) { |
| 449 |
case HT_RSSI_TSSI_2G: |
| 450 |
b43_phy_set(dev, ctl_regs[core][0], 0x3 << 8); |
| 451 |
b43_phy_set(dev, ctl_regs[core][0], 0x3 << 10); |
| 452 |
b43_phy_set(dev, ctl_regs[core][1], 0x1 << 9); |
| 453 |
b43_phy_set(dev, ctl_regs[core][1], 0x1 << 10); |
| 454 |
|
| 455 |
b43_radio_set(dev, R2059_C3 | 0xbf, 0x1); |
| 456 |
b43_radio_write(dev, radio_r[core] | 0x159, |
| 457 |
0x11); |
| 458 |
break; |
| 459 |
default: |
| 460 |
b43err(dev->wl, "RSSI selection for type %d not implemented yet\n", |
| 461 |
rssi_type); |
| 462 |
} |
| 463 |
} |
| 464 |
} |
| 465 |
} |
| 466 |
|
| 467 |
static void b43_phy_ht_poll_rssi(struct b43_wldev *dev, enum ht_rssi_type type, |
| 468 |
s32 *buf, u8 nsamp) |
| 469 |
{ |
| 470 |
u16 phy_regs_values[12]; |
| 471 |
static const u16 phy_regs_to_save[] = { |
| 472 |
B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, |
| 473 |
0x848, 0x841, |
| 474 |
B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, |
| 475 |
0x868, 0x861, |
| 476 |
B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, |
| 477 |
0x888, 0x881, |
| 478 |
}; |
| 479 |
u16 tmp[3]; |
| 480 |
int i; |
| 481 |
|
| 482 |
for (i = 0; i < 12; i++) |
| 483 |
phy_regs_values[i] = b43_phy_read(dev, phy_regs_to_save[i]); |
| 484 |
|
| 485 |
b43_phy_ht_rssi_select(dev, 5, type); |
| 486 |
|
| 487 |
for (i = 0; i < 6; i++) |
| 488 |
buf[i] = 0; |
| 489 |
|
| 490 |
for (i = 0; i < nsamp; i++) { |
| 491 |
tmp[0] = b43_phy_read(dev, B43_PHY_HT_RSSI_C1); |
| 492 |
tmp[1] = b43_phy_read(dev, B43_PHY_HT_RSSI_C2); |
| 493 |
tmp[2] = b43_phy_read(dev, B43_PHY_HT_RSSI_C3); |
| 494 |
|
| 495 |
buf[0] += ((s8)((tmp[0] & 0x3F) << 2)) >> 2; |
| 496 |
buf[1] += ((s8)(((tmp[0] >> 8) & 0x3F) << 2)) >> 2; |
| 497 |
buf[2] += ((s8)((tmp[1] & 0x3F) << 2)) >> 2; |
| 498 |
buf[3] += ((s8)(((tmp[1] >> 8) & 0x3F) << 2)) >> 2; |
| 499 |
buf[4] += ((s8)((tmp[2] & 0x3F) << 2)) >> 2; |
| 500 |
buf[5] += ((s8)(((tmp[2] >> 8) & 0x3F) << 2)) >> 2; |
| 501 |
} |
| 502 |
|
| 503 |
for (i = 0; i < 12; i++) |
| 504 |
b43_phy_write(dev, phy_regs_to_save[i], phy_regs_values[i]); |
| 505 |
} |
| 506 |
|
| 507 |
/************************************************** |
| 508 |
* Tx/Rx |
| 509 |
**************************************************/ |
| 510 |
|
| 511 |
static void b43_phy_ht_tx_power_fix(struct b43_wldev *dev) |
| 512 |
{ |
| 513 |
int i; |
| 514 |
|
| 515 |
for (i = 0; i < 3; i++) { |
| 516 |
u16 mask; |
| 517 |
u32 tmp = b43_httab_read(dev, B43_HTTAB32(26, 0xE8)); |
| 518 |
|
| 519 |
if (0) /* FIXME */ |
| 520 |
mask = 0x2 << (i * 4); |
| 521 |
else |
| 522 |
mask = 0; |
| 523 |
b43_phy_mask(dev, B43_PHY_EXTG(0x108), mask); |
| 524 |
|
| 525 |
b43_httab_write(dev, B43_HTTAB16(7, 0x110 + i), tmp >> 16); |
| 526 |
b43_httab_write(dev, B43_HTTAB8(13, 0x63 + (i * 4)), |
| 527 |
tmp & 0xFF); |
| 528 |
b43_httab_write(dev, B43_HTTAB8(13, 0x73 + (i * 4)), |
| 529 |
tmp & 0xFF); |
| 530 |
} |
| 531 |
} |
| 532 |
|
| 533 |
static void b43_phy_ht_tx_power_ctl(struct b43_wldev *dev, bool enable) |
| 534 |
{ |
| 535 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 536 |
u16 en_bits = B43_PHY_HT_TXPCTL_CMD_C1_COEFF | |
| 537 |
B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN | |
| 538 |
B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN; |
| 539 |
static const u16 cmd_regs[3] = { B43_PHY_HT_TXPCTL_CMD_C1, |
| 540 |
B43_PHY_HT_TXPCTL_CMD_C2, |
| 541 |
B43_PHY_HT_TXPCTL_CMD_C3 }; |
| 542 |
static const u16 status_regs[3] = { B43_PHY_HT_TX_PCTL_STATUS_C1, |
| 543 |
B43_PHY_HT_TX_PCTL_STATUS_C2, |
| 544 |
B43_PHY_HT_TX_PCTL_STATUS_C3 }; |
| 545 |
int i; |
| 546 |
|
| 547 |
if (!enable) { |
| 548 |
if (b43_phy_read(dev, B43_PHY_HT_TXPCTL_CMD_C1) & en_bits) { |
| 549 |
/* We disable enabled TX pwr ctl, save it's state */ |
| 550 |
for (i = 0; i < 3; i++) |
| 551 |
phy_ht->tx_pwr_idx[i] = |
| 552 |
b43_phy_read(dev, status_regs[i]); |
| 553 |
} |
| 554 |
b43_phy_mask(dev, B43_PHY_HT_TXPCTL_CMD_C1, 0xffff & ~en_bits); |
| 555 |
} else { |
| 556 |
b43_phy_set(dev, B43_PHY_HT_TXPCTL_CMD_C1, en_bits); |
| 557 |
|
| 558 |
if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ) { |
| 559 |
for (i = 0; i < 3; i++) |
| 560 |
b43_phy_write(dev, cmd_regs[i], 0x32); |
| 561 |
} |
| 562 |
|
| 563 |
for (i = 0; i < 3; i++) |
| 564 |
if (phy_ht->tx_pwr_idx[i] <= |
| 565 |
B43_PHY_HT_TXPCTL_CMD_C1_INIT) |
| 566 |
b43_phy_write(dev, cmd_regs[i], |
| 567 |
phy_ht->tx_pwr_idx[i]); |
| 568 |
} |
| 569 |
|
| 570 |
phy_ht->tx_pwr_ctl = enable; |
| 571 |
} |
| 572 |
|
| 573 |
static void b43_phy_ht_tx_power_ctl_idle_tssi(struct b43_wldev *dev) |
| 574 |
{ |
| 575 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 576 |
static const u16 base[] = { 0x840, 0x860, 0x880 }; |
| 577 |
u16 save_regs[3][3]; |
| 578 |
s32 rssi_buf[6]; |
| 579 |
int core; |
| 580 |
|
| 581 |
for (core = 0; core < 3; core++) { |
| 582 |
save_regs[core][1] = b43_phy_read(dev, base[core] + 6); |
| 583 |
save_regs[core][2] = b43_phy_read(dev, base[core] + 7); |
| 584 |
save_regs[core][0] = b43_phy_read(dev, base[core] + 0); |
| 585 |
|
| 586 |
b43_phy_write(dev, base[core] + 6, 0); |
| 587 |
b43_phy_mask(dev, base[core] + 7, ~0xF); /* 0xF? Or just 0x6? */ |
| 588 |
b43_phy_set(dev, base[core] + 0, 0x0400); |
| 589 |
b43_phy_set(dev, base[core] + 0, 0x1000); |
| 590 |
} |
| 591 |
|
| 592 |
b43_phy_ht_tx_tone(dev); |
| 593 |
udelay(20); |
| 594 |
b43_phy_ht_poll_rssi(dev, HT_RSSI_TSSI_2G, rssi_buf, 1); |
| 595 |
b43_phy_ht_stop_playback(dev); |
| 596 |
b43_phy_ht_reset_cca(dev); |
| 597 |
|
| 598 |
phy_ht->idle_tssi[0] = rssi_buf[0] & 0xff; |
| 599 |
phy_ht->idle_tssi[1] = rssi_buf[2] & 0xff; |
| 600 |
phy_ht->idle_tssi[2] = rssi_buf[4] & 0xff; |
| 601 |
|
| 602 |
for (core = 0; core < 3; core++) { |
| 603 |
b43_phy_write(dev, base[core] + 0, save_regs[core][0]); |
| 604 |
b43_phy_write(dev, base[core] + 6, save_regs[core][1]); |
| 605 |
b43_phy_write(dev, base[core] + 7, save_regs[core][2]); |
| 606 |
} |
| 607 |
} |
| 608 |
|
| 609 |
static void b43_phy_ht_tssi_setup(struct b43_wldev *dev) |
| 610 |
{ |
| 611 |
static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| 612 |
int core; |
| 613 |
|
| 614 |
/* 0x159 is probably TX_SSI_MUX or TSSIG (by comparing to N-PHY) */ |
| 615 |
for (core = 0; core < 3; core++) { |
| 616 |
b43_radio_set(dev, 0x8bf, 0x1); |
| 617 |
b43_radio_write(dev, routing[core] | 0x0159, 0x0011); |
| 618 |
} |
| 619 |
} |
| 620 |
|
| 621 |
static void b43_phy_ht_tx_power_ctl_setup(struct b43_wldev *dev) |
| 622 |
{ |
| 623 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 624 |
struct ssb_sprom *sprom = dev->dev->bus_sprom; |
| 625 |
|
| 626 |
u8 *idle = phy_ht->idle_tssi; |
| 627 |
u8 target[3]; |
| 628 |
s16 a1[3], b0[3], b1[3]; |
| 629 |
|
| 630 |
u16 freq = dev->phy.chandef->chan->center_freq; |
| 631 |
int i, c; |
| 632 |
|
| 633 |
if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) { |
| 634 |
for (c = 0; c < 3; c++) { |
| 635 |
target[c] = sprom->core_pwr_info[c].maxpwr_2g; |
| 636 |
a1[c] = sprom->core_pwr_info[c].pa_2g[0]; |
| 637 |
b0[c] = sprom->core_pwr_info[c].pa_2g[1]; |
| 638 |
b1[c] = sprom->core_pwr_info[c].pa_2g[2]; |
| 639 |
} |
| 640 |
} else if (freq >= 4900 && freq < 5100) { |
| 641 |
for (c = 0; c < 3; c++) { |
| 642 |
target[c] = sprom->core_pwr_info[c].maxpwr_5gl; |
| 643 |
a1[c] = sprom->core_pwr_info[c].pa_5gl[0]; |
| 644 |
b0[c] = sprom->core_pwr_info[c].pa_5gl[1]; |
| 645 |
b1[c] = sprom->core_pwr_info[c].pa_5gl[2]; |
| 646 |
} |
| 647 |
} else if (freq >= 5100 && freq < 5500) { |
| 648 |
for (c = 0; c < 3; c++) { |
| 649 |
target[c] = sprom->core_pwr_info[c].maxpwr_5g; |
| 650 |
a1[c] = sprom->core_pwr_info[c].pa_5g[0]; |
| 651 |
b0[c] = sprom->core_pwr_info[c].pa_5g[1]; |
| 652 |
b1[c] = sprom->core_pwr_info[c].pa_5g[2]; |
| 653 |
} |
| 654 |
} else if (freq >= 5500) { |
| 655 |
for (c = 0; c < 3; c++) { |
| 656 |
target[c] = sprom->core_pwr_info[c].maxpwr_5gh; |
| 657 |
a1[c] = sprom->core_pwr_info[c].pa_5gh[0]; |
| 658 |
b0[c] = sprom->core_pwr_info[c].pa_5gh[1]; |
| 659 |
b1[c] = sprom->core_pwr_info[c].pa_5gh[2]; |
| 660 |
} |
| 661 |
} else { |
| 662 |
target[0] = target[1] = target[2] = 52; |
| 663 |
a1[0] = a1[1] = a1[2] = -424; |
| 664 |
b0[0] = b0[1] = b0[2] = 5612; |
| 665 |
b1[0] = b1[1] = b1[2] = -1393; |
| 666 |
} |
| 667 |
|
| 668 |
b43_phy_set(dev, B43_PHY_HT_TSSIMODE, B43_PHY_HT_TSSIMODE_EN); |
| 669 |
b43_phy_mask(dev, B43_PHY_HT_TXPCTL_CMD_C1, |
| 670 |
~B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN & 0xFFFF); |
| 671 |
|
| 672 |
/* TODO: Does it depend on sprom->fem.ghz2.tssipos? */ |
| 673 |
b43_phy_set(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, 0x4000); |
| 674 |
|
| 675 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, |
| 676 |
~B43_PHY_HT_TXPCTL_CMD_C1_INIT, 0x19); |
| 677 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C2, |
| 678 |
~B43_PHY_HT_TXPCTL_CMD_C2_INIT, 0x19); |
| 679 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C3, |
| 680 |
~B43_PHY_HT_TXPCTL_CMD_C3_INIT, 0x19); |
| 681 |
|
| 682 |
b43_phy_set(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| 683 |
B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF); |
| 684 |
|
| 685 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| 686 |
~B43_PHY_HT_TXPCTL_IDLE_TSSI_C1, |
| 687 |
idle[0] << B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT); |
| 688 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| 689 |
~B43_PHY_HT_TXPCTL_IDLE_TSSI_C2, |
| 690 |
idle[1] << B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT); |
| 691 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI2, |
| 692 |
~B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3, |
| 693 |
idle[2] << B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT); |
| 694 |
|
| 695 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_N, ~B43_PHY_HT_TXPCTL_N_TSSID, |
| 696 |
0xf0); |
| 697 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_N, ~B43_PHY_HT_TXPCTL_N_NPTIL2, |
| 698 |
0x3 << B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT); |
| 699 |
#if 0 |
| 700 |
/* TODO: what to mask/set? */ |
| 701 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, 0x800, 0) |
| 702 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, 0x400, 0) |
| 703 |
#endif |
| 704 |
|
| 705 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR, |
| 706 |
~B43_PHY_HT_TXPCTL_TARG_PWR_C1, |
| 707 |
target[0] << B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT); |
| 708 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR, |
| 709 |
~B43_PHY_HT_TXPCTL_TARG_PWR_C2 & 0xFFFF, |
| 710 |
target[1] << B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT); |
| 711 |
b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR2, |
| 712 |
~B43_PHY_HT_TXPCTL_TARG_PWR2_C3, |
| 713 |
target[2] << B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT); |
| 714 |
|
| 715 |
for (c = 0; c < 3; c++) { |
| 716 |
s32 num, den, pwr; |
| 717 |
u32 regval[64]; |
| 718 |
|
| 719 |
for (i = 0; i < 64; i++) { |
| 720 |
num = 8 * (16 * b0[c] + b1[c] * i); |
| 721 |
den = 32768 + a1[c] * i; |
| 722 |
pwr = max((4 * num + den / 2) / den, -8); |
| 723 |
regval[i] = pwr; |
| 724 |
} |
| 725 |
b43_httab_write_bulk(dev, B43_HTTAB16(26 + c, 0), 64, regval); |
| 726 |
} |
| 727 |
} |
| 728 |
|
| 729 |
/************************************************** |
| 730 |
* Channel switching ops. |
| 731 |
**************************************************/ |
| 732 |
|
| 733 |
static void b43_phy_ht_spur_avoid(struct b43_wldev *dev, |
| 734 |
struct ieee80211_channel *new_channel) |
| 735 |
{ |
| 736 |
struct bcma_device *core = dev->dev->bdev; |
| 737 |
int spuravoid = 0; |
| 738 |
|
| 739 |
/* Check for 13 and 14 is just a guess, we don't have enough logs. */ |
| 740 |
if (new_channel->hw_value == 13 || new_channel->hw_value == 14) |
| 741 |
spuravoid = 1; |
| 742 |
bcma_core_pll_ctl(core, B43_BCMA_CLKCTLST_PHY_PLL_REQ, 0, false); |
| 743 |
bcma_pmu_spuravoid_pllupdate(&core->bus->drv_cc, spuravoid); |
| 744 |
bcma_core_pll_ctl(core, |
| 745 |
B43_BCMA_CLKCTLST_80211_PLL_REQ | |
| 746 |
B43_BCMA_CLKCTLST_PHY_PLL_REQ, |
| 747 |
B43_BCMA_CLKCTLST_80211_PLL_ST | |
| 748 |
B43_BCMA_CLKCTLST_PHY_PLL_ST, false); |
| 749 |
|
| 750 |
b43_mac_switch_freq(dev, spuravoid); |
| 751 |
|
| 752 |
b43_wireless_core_phy_pll_reset(dev); |
| 753 |
|
| 754 |
if (spuravoid) |
| 755 |
b43_phy_set(dev, B43_PHY_HT_BBCFG, B43_PHY_HT_BBCFG_RSTRX); |
| 756 |
else |
| 757 |
b43_phy_mask(dev, B43_PHY_HT_BBCFG, |
| 758 |
~B43_PHY_HT_BBCFG_RSTRX & 0xFFFF); |
| 759 |
|
| 760 |
b43_phy_ht_reset_cca(dev); |
| 761 |
} |
| 762 |
|
| 763 |
static void b43_phy_ht_channel_setup(struct b43_wldev *dev, |
| 764 |
const struct b43_phy_ht_channeltab_e_phy *e, |
| 765 |
struct ieee80211_channel *new_channel) |
| 766 |
{ |
| 767 |
if (new_channel->band == NL80211_BAND_5GHZ) { |
| 768 |
/* Switch to 2 GHz for a moment to access B-PHY regs */ |
| 769 |
b43_phy_mask(dev, B43_PHY_HT_BANDCTL, ~B43_PHY_HT_BANDCTL_5GHZ); |
| 770 |
|
| 771 |
b43_phy_ht_bphy_reset(dev, true); |
| 772 |
|
| 773 |
/* Switch to 5 GHz */ |
| 774 |
b43_phy_set(dev, B43_PHY_HT_BANDCTL, B43_PHY_HT_BANDCTL_5GHZ); |
| 775 |
} else { |
| 776 |
/* Switch to 2 GHz */ |
| 777 |
b43_phy_mask(dev, B43_PHY_HT_BANDCTL, ~B43_PHY_HT_BANDCTL_5GHZ); |
| 778 |
|
| 779 |
b43_phy_ht_bphy_reset(dev, false); |
| 780 |
} |
| 781 |
|
| 782 |
b43_phy_write(dev, B43_PHY_HT_BW1, e->bw1); |
| 783 |
b43_phy_write(dev, B43_PHY_HT_BW2, e->bw2); |
| 784 |
b43_phy_write(dev, B43_PHY_HT_BW3, e->bw3); |
| 785 |
b43_phy_write(dev, B43_PHY_HT_BW4, e->bw4); |
| 786 |
b43_phy_write(dev, B43_PHY_HT_BW5, e->bw5); |
| 787 |
b43_phy_write(dev, B43_PHY_HT_BW6, e->bw6); |
| 788 |
|
| 789 |
if (new_channel->hw_value == 14) { |
| 790 |
b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_OFDM_EN, 0); |
| 791 |
b43_phy_set(dev, B43_PHY_HT_TEST, 0x0800); |
| 792 |
} else { |
| 793 |
b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_OFDM_EN, |
| 794 |
B43_PHY_HT_CLASS_CTL_OFDM_EN); |
| 795 |
if (new_channel->band == NL80211_BAND_2GHZ) |
| 796 |
b43_phy_mask(dev, B43_PHY_HT_TEST, ~0x840); |
| 797 |
} |
| 798 |
|
| 799 |
if (1) /* TODO: On N it's for early devices only, what about HT? */ |
| 800 |
b43_phy_ht_tx_power_fix(dev); |
| 801 |
|
| 802 |
b43_phy_ht_spur_avoid(dev, new_channel); |
| 803 |
|
| 804 |
b43_phy_write(dev, 0x017e, 0x3830); |
| 805 |
} |
| 806 |
|
| 807 |
static int b43_phy_ht_set_channel(struct b43_wldev *dev, |
| 808 |
struct ieee80211_channel *channel, |
| 809 |
enum nl80211_channel_type channel_type) |
| 810 |
{ |
| 811 |
struct b43_phy *phy = &dev->phy; |
| 812 |
|
| 813 |
const struct b43_phy_ht_channeltab_e_radio2059 *chent_r2059 = NULL; |
| 814 |
|
| 815 |
if (phy->radio_ver == 0x2059) { |
| 816 |
chent_r2059 = b43_phy_ht_get_channeltab_e_r2059(dev, |
| 817 |
channel->center_freq); |
| 818 |
if (!chent_r2059) |
| 819 |
return -ESRCH; |
| 820 |
} else { |
| 821 |
return -ESRCH; |
| 822 |
} |
| 823 |
|
| 824 |
/* TODO: In case of N-PHY some bandwidth switching goes here */ |
| 825 |
|
| 826 |
if (phy->radio_ver == 0x2059) { |
| 827 |
b43_radio_2059_channel_setup(dev, chent_r2059); |
| 828 |
b43_phy_ht_channel_setup(dev, &(chent_r2059->phy_regs), |
| 829 |
channel); |
| 830 |
} else { |
| 831 |
return -ESRCH; |
| 832 |
} |
| 833 |
|
| 834 |
return 0; |
| 835 |
} |
| 836 |
|
| 837 |
/************************************************** |
| 838 |
* Basic PHY ops. |
| 839 |
**************************************************/ |
| 840 |
|
| 841 |
static int b43_phy_ht_op_allocate(struct b43_wldev *dev) |
| 842 |
{ |
| 843 |
struct b43_phy_ht *phy_ht; |
| 844 |
|
| 845 |
phy_ht = kzalloc_obj(*phy_ht); |
| 846 |
if (!phy_ht) |
| 847 |
return -ENOMEM; |
| 848 |
dev->phy.ht = phy_ht; |
| 849 |
|
| 850 |
return 0; |
| 851 |
} |
| 852 |
|
| 853 |
static void b43_phy_ht_op_prepare_structs(struct b43_wldev *dev) |
| 854 |
{ |
| 855 |
struct b43_phy *phy = &dev->phy; |
| 856 |
struct b43_phy_ht *phy_ht = phy->ht; |
| 857 |
int i; |
| 858 |
|
| 859 |
memset(phy_ht, 0, sizeof(*phy_ht)); |
| 860 |
|
| 861 |
phy_ht->tx_pwr_ctl = true; |
| 862 |
for (i = 0; i < 3; i++) |
| 863 |
phy_ht->tx_pwr_idx[i] = B43_PHY_HT_TXPCTL_CMD_C1_INIT + 1; |
| 864 |
|
| 865 |
for (i = 0; i < 3; i++) |
| 866 |
phy_ht->bb_mult_save[i] = -1; |
| 867 |
} |
| 868 |
|
| 869 |
static int b43_phy_ht_op_init(struct b43_wldev *dev) |
| 870 |
{ |
| 871 |
struct b43_phy_ht *phy_ht = dev->phy.ht; |
| 872 |
u16 tmp; |
| 873 |
u16 clip_state[3]; |
| 874 |
bool saved_tx_pwr_ctl; |
| 875 |
|
| 876 |
if (dev->dev->bus_type != B43_BUS_BCMA) { |
| 877 |
b43err(dev->wl, "HT-PHY is supported only on BCMA bus!\n"); |
| 878 |
return -EOPNOTSUPP; |
| 879 |
} |
| 880 |
|
| 881 |
b43_phy_ht_tables_init(dev); |
| 882 |
|
| 883 |
b43_phy_mask(dev, 0x0be, ~0x2); |
| 884 |
b43_phy_set(dev, 0x23f, 0x7ff); |
| 885 |
b43_phy_set(dev, 0x240, 0x7ff); |
| 886 |
b43_phy_set(dev, 0x241, 0x7ff); |
| 887 |
|
| 888 |
b43_phy_ht_zero_extg(dev); |
| 889 |
|
| 890 |
b43_phy_mask(dev, B43_PHY_EXTG(0), ~0x3); |
| 891 |
|
| 892 |
b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0); |
| 893 |
b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0); |
| 894 |
b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0); |
| 895 |
|
| 896 |
b43_phy_write(dev, B43_PHY_EXTG(0x103), 0x20); |
| 897 |
b43_phy_write(dev, B43_PHY_EXTG(0x101), 0x20); |
| 898 |
b43_phy_write(dev, 0x20d, 0xb8); |
| 899 |
b43_phy_write(dev, B43_PHY_EXTG(0x14f), 0xc8); |
| 900 |
b43_phy_write(dev, 0x70, 0x50); |
| 901 |
b43_phy_write(dev, 0x1ff, 0x30); |
| 902 |
|
| 903 |
if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ) |
| 904 |
b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_CCK_EN, 0); |
| 905 |
else |
| 906 |
b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_CCK_EN, |
| 907 |
B43_PHY_HT_CLASS_CTL_CCK_EN); |
| 908 |
|
| 909 |
b43_phy_set(dev, 0xb1, 0x91); |
| 910 |
b43_phy_write(dev, 0x32f, 0x0003); |
| 911 |
b43_phy_write(dev, 0x077, 0x0010); |
| 912 |
b43_phy_write(dev, 0x0b4, 0x0258); |
| 913 |
b43_phy_mask(dev, 0x17e, ~0x4000); |
| 914 |
|
| 915 |
b43_phy_write(dev, 0x0b9, 0x0072); |
| 916 |
|
| 917 |
b43_httab_write_few(dev, B43_HTTAB16(7, 0x14e), 2, 0x010f, 0x010f); |
| 918 |
b43_httab_write_few(dev, B43_HTTAB16(7, 0x15e), 2, 0x010f, 0x010f); |
| 919 |
b43_httab_write_few(dev, B43_HTTAB16(7, 0x16e), 2, 0x010f, 0x010f); |
| 920 |
|
| 921 |
b43_phy_ht_afe_unk1(dev); |
| 922 |
|
| 923 |
b43_httab_write_few(dev, B43_HTTAB16(7, 0x130), 9, 0x777, 0x111, 0x111, |
| 924 |
0x777, 0x111, 0x111, 0x777, 0x111, 0x111); |
| 925 |
|
| 926 |
b43_httab_write(dev, B43_HTTAB16(7, 0x120), 0x0777); |
| 927 |
b43_httab_write(dev, B43_HTTAB16(7, 0x124), 0x0777); |
| 928 |
|
| 929 |
b43_httab_write(dev, B43_HTTAB16(8, 0x00), 0x02); |
| 930 |
b43_httab_write(dev, B43_HTTAB16(8, 0x10), 0x02); |
| 931 |
b43_httab_write(dev, B43_HTTAB16(8, 0x20), 0x02); |
| 932 |
|
| 933 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x08), 4, |
| 934 |
0x8e, 0x96, 0x96, 0x96); |
| 935 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x18), 4, |
| 936 |
0x8f, 0x9f, 0x9f, 0x9f); |
| 937 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x28), 4, |
| 938 |
0x8f, 0x9f, 0x9f, 0x9f); |
| 939 |
|
| 940 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x0c), 4, 0x2, 0x2, 0x2, 0x2); |
| 941 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x1c), 4, 0x2, 0x2, 0x2, 0x2); |
| 942 |
b43_httab_write_few(dev, B43_HTTAB16(8, 0x2c), 4, 0x2, 0x2, 0x2, 0x2); |
| 943 |
|
| 944 |
b43_phy_maskset(dev, 0x0280, 0xff00, 0x3e); |
| 945 |
b43_phy_maskset(dev, 0x0283, 0xff00, 0x3e); |
| 946 |
b43_phy_maskset(dev, B43_PHY_OFDM(0x0141), 0xff00, 0x46); |
| 947 |
b43_phy_maskset(dev, 0x0283, 0xff00, 0x40); |
| 948 |
|
| 949 |
b43_httab_write_few(dev, B43_HTTAB16(00, 0x8), 4, |
| 950 |
0x09, 0x0e, 0x13, 0x18); |
| 951 |
b43_httab_write_few(dev, B43_HTTAB16(01, 0x8), 4, |
| 952 |
0x09, 0x0e, 0x13, 0x18); |
| 953 |
/* TODO: Did wl mean 2 instead of 40? */ |
| 954 |
b43_httab_write_few(dev, B43_HTTAB16(40, 0x8), 4, |
| 955 |
0x09, 0x0e, 0x13, 0x18); |
| 956 |
|
| 957 |
b43_phy_maskset(dev, B43_PHY_OFDM(0x24), 0x3f, 0xd); |
| 958 |
b43_phy_maskset(dev, B43_PHY_OFDM(0x64), 0x3f, 0xd); |
| 959 |
b43_phy_maskset(dev, B43_PHY_OFDM(0xa4), 0x3f, 0xd); |
| 960 |
|
| 961 |
b43_phy_set(dev, B43_PHY_EXTG(0x060), 0x1); |
| 962 |
b43_phy_set(dev, B43_PHY_EXTG(0x064), 0x1); |
| 963 |
b43_phy_set(dev, B43_PHY_EXTG(0x080), 0x1); |
| 964 |
b43_phy_set(dev, B43_PHY_EXTG(0x084), 0x1); |
| 965 |
|
| 966 |
/* Copy some tables entries */ |
| 967 |
tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x144)); |
| 968 |
b43_httab_write(dev, B43_HTTAB16(7, 0x14a), tmp); |
| 969 |
tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x154)); |
| 970 |
b43_httab_write(dev, B43_HTTAB16(7, 0x15a), tmp); |
| 971 |
tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x164)); |
| 972 |
b43_httab_write(dev, B43_HTTAB16(7, 0x16a), tmp); |
| 973 |
|
| 974 |
/* Reset CCA */ |
| 975 |
b43_phy_force_clock(dev, true); |
| 976 |
tmp = b43_phy_read(dev, B43_PHY_HT_BBCFG); |
| 977 |
b43_phy_write(dev, B43_PHY_HT_BBCFG, tmp | B43_PHY_HT_BBCFG_RSTCCA); |
| 978 |
b43_phy_write(dev, B43_PHY_HT_BBCFG, tmp & ~B43_PHY_HT_BBCFG_RSTCCA); |
| 979 |
b43_phy_force_clock(dev, false); |
| 980 |
|
| 981 |
b43_mac_phy_clock_set(dev, true); |
| 982 |
|
| 983 |
b43_phy_ht_pa_override(dev, false); |
| 984 |
b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RX2TX); |
| 985 |
b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RST2RX); |
| 986 |
b43_phy_ht_pa_override(dev, true); |
| 987 |
|
| 988 |
/* TODO: Should we restore it? Or store it in global PHY info? */ |
| 989 |
b43_phy_ht_classifier(dev, 0, 0); |
| 990 |
b43_phy_ht_read_clip_detection(dev, clip_state); |
| 991 |
|
| 992 |
if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) |
| 993 |
b43_phy_ht_bphy_init(dev); |
| 994 |
|
| 995 |
b43_httab_write_bulk(dev, B43_HTTAB32(0x1a, 0xc0), |
| 996 |
B43_HTTAB_1A_C0_LATE_SIZE, b43_httab_0x1a_0xc0_late); |
| 997 |
|
| 998 |
saved_tx_pwr_ctl = phy_ht->tx_pwr_ctl; |
| 999 |
b43_phy_ht_tx_power_fix(dev); |
| 1000 |
b43_phy_ht_tx_power_ctl(dev, false); |
| 1001 |
b43_phy_ht_tx_power_ctl_idle_tssi(dev); |
| 1002 |
b43_phy_ht_tx_power_ctl_setup(dev); |
| 1003 |
b43_phy_ht_tssi_setup(dev); |
| 1004 |
b43_phy_ht_tx_power_ctl(dev, saved_tx_pwr_ctl); |
| 1005 |
|
| 1006 |
return 0; |
| 1007 |
} |
| 1008 |
|
| 1009 |
static void b43_phy_ht_op_free(struct b43_wldev *dev) |
| 1010 |
{ |
| 1011 |
struct b43_phy *phy = &dev->phy; |
| 1012 |
struct b43_phy_ht *phy_ht = phy->ht; |
| 1013 |
|
| 1014 |
kfree(phy_ht); |
| 1015 |
phy->ht = NULL; |
| 1016 |
} |
| 1017 |
|
| 1018 |
/* https://bcm-v4.sipsolutions.net/802.11/Radio/Switch%20Radio */ |
| 1019 |
static void b43_phy_ht_op_software_rfkill(struct b43_wldev *dev, |
| 1020 |
bool blocked) |
| 1021 |
{ |
| 1022 |
if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED) |
| 1023 |
b43err(dev->wl, "MAC not suspended\n"); |
| 1024 |
|
| 1025 |
if (blocked) { |
| 1026 |
b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, |
| 1027 |
~B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| 1028 |
} else { |
| 1029 |
if (dev->phy.radio_ver == 0x2059) |
| 1030 |
b43_radio_2059_init(dev); |
| 1031 |
else |
| 1032 |
B43_WARN_ON(1); |
| 1033 |
|
| 1034 |
b43_switch_channel(dev, dev->phy.channel); |
| 1035 |
} |
| 1036 |
} |
| 1037 |
|
| 1038 |
static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on) |
| 1039 |
{ |
| 1040 |
if (on) { |
| 1041 |
b43_phy_write(dev, B43_PHY_HT_AFE_C1, 0x00cd); |
| 1042 |
b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0x0000); |
| 1043 |
b43_phy_write(dev, B43_PHY_HT_AFE_C2, 0x00cd); |
| 1044 |
b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0x0000); |
| 1045 |
b43_phy_write(dev, B43_PHY_HT_AFE_C3, 0x00cd); |
| 1046 |
b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0x0000); |
| 1047 |
} else { |
| 1048 |
b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0x07ff); |
| 1049 |
b43_phy_write(dev, B43_PHY_HT_AFE_C1, 0x00fd); |
| 1050 |
b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0x07ff); |
| 1051 |
b43_phy_write(dev, B43_PHY_HT_AFE_C2, 0x00fd); |
| 1052 |
b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0x07ff); |
| 1053 |
b43_phy_write(dev, B43_PHY_HT_AFE_C3, 0x00fd); |
| 1054 |
} |
| 1055 |
} |
| 1056 |
|
| 1057 |
static int b43_phy_ht_op_switch_channel(struct b43_wldev *dev, |
| 1058 |
unsigned int new_channel) |
| 1059 |
{ |
| 1060 |
struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; |
| 1061 |
enum nl80211_channel_type channel_type = |
| 1062 |
cfg80211_get_chandef_type(&dev->wl->hw->conf.chandef); |
| 1063 |
|
| 1064 |
if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) { |
| 1065 |
if ((new_channel < 1) || (new_channel > 14)) |
| 1066 |
return -EINVAL; |
| 1067 |
} else { |
| 1068 |
return -EINVAL; |
| 1069 |
} |
| 1070 |
|
| 1071 |
return b43_phy_ht_set_channel(dev, channel, channel_type); |
| 1072 |
} |
| 1073 |
|
| 1074 |
static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev) |
| 1075 |
{ |
| 1076 |
if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) |
| 1077 |
return 11; |
| 1078 |
return 36; |
| 1079 |
} |
| 1080 |
|
| 1081 |
/************************************************** |
| 1082 |
* R/W ops. |
| 1083 |
**************************************************/ |
| 1084 |
|
| 1085 |
static void b43_phy_ht_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask, |
| 1086 |
u16 set) |
| 1087 |
{ |
| 1088 |
b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); |
| 1089 |
b43_write16(dev, B43_MMIO_PHY_DATA, |
| 1090 |
(b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set); |
| 1091 |
} |
| 1092 |
|
| 1093 |
static u16 b43_phy_ht_op_radio_read(struct b43_wldev *dev, u16 reg) |
| 1094 |
{ |
| 1095 |
/* HT-PHY needs 0x200 for read access */ |
| 1096 |
reg |= 0x200; |
| 1097 |
|
| 1098 |
b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg); |
| 1099 |
return b43_read16(dev, B43_MMIO_RADIO24_DATA); |
| 1100 |
} |
| 1101 |
|
| 1102 |
static void b43_phy_ht_op_radio_write(struct b43_wldev *dev, u16 reg, |
| 1103 |
u16 value) |
| 1104 |
{ |
| 1105 |
b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg); |
| 1106 |
b43_write16(dev, B43_MMIO_RADIO24_DATA, value); |
| 1107 |
} |
| 1108 |
|
| 1109 |
static enum b43_txpwr_result |
| 1110 |
b43_phy_ht_op_recalc_txpower(struct b43_wldev *dev, bool ignore_tssi) |
| 1111 |
{ |
| 1112 |
return B43_TXPWR_RES_DONE; |
| 1113 |
} |
| 1114 |
|
| 1115 |
static void b43_phy_ht_op_adjust_txpower(struct b43_wldev *dev) |
| 1116 |
{ |
| 1117 |
} |
| 1118 |
|
| 1119 |
/************************************************** |
| 1120 |
* PHY ops struct. |
| 1121 |
**************************************************/ |
| 1122 |
|
| 1123 |
const struct b43_phy_operations b43_phyops_ht = { |
| 1124 |
.allocate = b43_phy_ht_op_allocate, |
| 1125 |
.free = b43_phy_ht_op_free, |
| 1126 |
.prepare_structs = b43_phy_ht_op_prepare_structs, |
| 1127 |
.init = b43_phy_ht_op_init, |
| 1128 |
.phy_maskset = b43_phy_ht_op_maskset, |
| 1129 |
.radio_read = b43_phy_ht_op_radio_read, |
| 1130 |
.radio_write = b43_phy_ht_op_radio_write, |
| 1131 |
.software_rfkill = b43_phy_ht_op_software_rfkill, |
| 1132 |
.switch_analog = b43_phy_ht_op_switch_analog, |
| 1133 |
.switch_channel = b43_phy_ht_op_switch_channel, |
| 1134 |
.get_default_chan = b43_phy_ht_op_get_default_chan, |
| 1135 |
.recalc_txpower = b43_phy_ht_op_recalc_txpower, |
| 1136 |
.adjust_txpower = b43_phy_ht_op_adjust_txpower, |
| 1137 |
}; |