| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef B43_H_ |
| 3 |
#define B43_H_ |
| 4 |
|
| 5 |
#include <linux/kernel.h> |
| 6 |
#include <linux/spinlock.h> |
| 7 |
#include <linux/interrupt.h> |
| 8 |
#include <linux/hw_random.h> |
| 9 |
#include <linux/bcma/bcma.h> |
| 10 |
#include <linux/ssb/ssb.h> |
| 11 |
#include <linux/completion.h> |
| 12 |
#include <net/mac80211.h> |
| 13 |
|
| 14 |
#include "debugfs.h" |
| 15 |
#include "leds.h" |
| 16 |
#include "rfkill.h" |
| 17 |
#include "bus.h" |
| 18 |
#include "lo.h" |
| 19 |
#include "phy_common.h" |
| 20 |
|
| 21 |
|
| 22 |
#ifdef CONFIG_B43_DEBUG |
| 23 |
# define B43_DEBUG 1 |
| 24 |
#else |
| 25 |
# define B43_DEBUG 0 |
| 26 |
#endif |
| 27 |
|
| 28 |
/* MMIO offsets */ |
| 29 |
#define B43_MMIO_DMA0_REASON 0x20 |
| 30 |
#define B43_MMIO_DMA0_IRQ_MASK 0x24 |
| 31 |
#define B43_MMIO_DMA1_REASON 0x28 |
| 32 |
#define B43_MMIO_DMA1_IRQ_MASK 0x2C |
| 33 |
#define B43_MMIO_DMA2_REASON 0x30 |
| 34 |
#define B43_MMIO_DMA2_IRQ_MASK 0x34 |
| 35 |
#define B43_MMIO_DMA3_REASON 0x38 |
| 36 |
#define B43_MMIO_DMA3_IRQ_MASK 0x3C |
| 37 |
#define B43_MMIO_DMA4_REASON 0x40 |
| 38 |
#define B43_MMIO_DMA4_IRQ_MASK 0x44 |
| 39 |
#define B43_MMIO_DMA5_REASON 0x48 |
| 40 |
#define B43_MMIO_DMA5_IRQ_MASK 0x4C |
| 41 |
#define B43_MMIO_MACCTL 0x120 /* MAC control */ |
| 42 |
#define B43_MMIO_MACCMD 0x124 /* MAC command */ |
| 43 |
#define B43_MMIO_GEN_IRQ_REASON 0x128 |
| 44 |
#define B43_MMIO_GEN_IRQ_MASK 0x12C |
| 45 |
#define B43_MMIO_RAM_CONTROL 0x130 |
| 46 |
#define B43_MMIO_RAM_DATA 0x134 |
| 47 |
#define B43_MMIO_PS_STATUS 0x140 |
| 48 |
#define B43_MMIO_RADIO_HWENABLED_HI 0x158 |
| 49 |
#define B43_MMIO_MAC_HW_CAP 0x15C /* MAC capabilities (corerev >= 13) */ |
| 50 |
#define B43_MMIO_SHM_CONTROL 0x160 |
| 51 |
#define B43_MMIO_SHM_DATA 0x164 |
| 52 |
#define B43_MMIO_SHM_DATA_UNALIGNED 0x166 |
| 53 |
#define B43_MMIO_XMITSTAT_0 0x170 |
| 54 |
#define B43_MMIO_XMITSTAT_1 0x174 |
| 55 |
#define B43_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ |
| 56 |
#define B43_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ |
| 57 |
#define B43_MMIO_TSF_CFP_REP 0x188 |
| 58 |
#define B43_MMIO_TSF_CFP_START 0x18C |
| 59 |
#define B43_MMIO_TSF_CFP_MAXDUR 0x190 |
| 60 |
|
| 61 |
/* 32-bit DMA */ |
| 62 |
#define B43_MMIO_DMA32_BASE0 0x200 |
| 63 |
#define B43_MMIO_DMA32_BASE1 0x220 |
| 64 |
#define B43_MMIO_DMA32_BASE2 0x240 |
| 65 |
#define B43_MMIO_DMA32_BASE3 0x260 |
| 66 |
#define B43_MMIO_DMA32_BASE4 0x280 |
| 67 |
#define B43_MMIO_DMA32_BASE5 0x2A0 |
| 68 |
/* 64-bit DMA */ |
| 69 |
#define B43_MMIO_DMA64_BASE0 0x200 |
| 70 |
#define B43_MMIO_DMA64_BASE1 0x240 |
| 71 |
#define B43_MMIO_DMA64_BASE2 0x280 |
| 72 |
#define B43_MMIO_DMA64_BASE3 0x2C0 |
| 73 |
#define B43_MMIO_DMA64_BASE4 0x300 |
| 74 |
#define B43_MMIO_DMA64_BASE5 0x340 |
| 75 |
|
| 76 |
/* PIO on core rev < 11 */ |
| 77 |
#define B43_MMIO_PIO_BASE0 0x300 |
| 78 |
#define B43_MMIO_PIO_BASE1 0x310 |
| 79 |
#define B43_MMIO_PIO_BASE2 0x320 |
| 80 |
#define B43_MMIO_PIO_BASE3 0x330 |
| 81 |
#define B43_MMIO_PIO_BASE4 0x340 |
| 82 |
#define B43_MMIO_PIO_BASE5 0x350 |
| 83 |
#define B43_MMIO_PIO_BASE6 0x360 |
| 84 |
#define B43_MMIO_PIO_BASE7 0x370 |
| 85 |
/* PIO on core rev >= 11 */ |
| 86 |
#define B43_MMIO_PIO11_BASE0 0x200 |
| 87 |
#define B43_MMIO_PIO11_BASE1 0x240 |
| 88 |
#define B43_MMIO_PIO11_BASE2 0x280 |
| 89 |
#define B43_MMIO_PIO11_BASE3 0x2C0 |
| 90 |
#define B43_MMIO_PIO11_BASE4 0x300 |
| 91 |
#define B43_MMIO_PIO11_BASE5 0x340 |
| 92 |
|
| 93 |
#define B43_MMIO_RADIO24_CONTROL 0x3D8 /* core rev >= 24 only */ |
| 94 |
#define B43_MMIO_RADIO24_DATA 0x3DA /* core rev >= 24 only */ |
| 95 |
#define B43_MMIO_PHY_VER 0x3E0 |
| 96 |
#define B43_MMIO_PHY_RADIO 0x3E2 |
| 97 |
#define B43_MMIO_PHY0 0x3E6 |
| 98 |
#define B43_MMIO_ANTENNA 0x3E8 |
| 99 |
#define B43_MMIO_CHANNEL 0x3F0 |
| 100 |
#define B43_MMIO_CHANNEL_EXT 0x3F4 |
| 101 |
#define B43_MMIO_RADIO_CONTROL 0x3F6 |
| 102 |
#define B43_MMIO_RADIO_DATA_HIGH 0x3F8 |
| 103 |
#define B43_MMIO_RADIO_DATA_LOW 0x3FA |
| 104 |
#define B43_MMIO_PHY_CONTROL 0x3FC |
| 105 |
#define B43_MMIO_PHY_DATA 0x3FE |
| 106 |
#define B43_MMIO_MACFILTER_CONTROL 0x420 |
| 107 |
#define B43_MMIO_MACFILTER_DATA 0x422 |
| 108 |
#define B43_MMIO_RCMTA_COUNT 0x43C |
| 109 |
#define B43_MMIO_PSM_PHY_HDR 0x492 |
| 110 |
#define B43_MMIO_RADIO_HWENABLED_LO 0x49A |
| 111 |
#define B43_MMIO_GPIO_CONTROL 0x49C |
| 112 |
#define B43_MMIO_GPIO_MASK 0x49E |
| 113 |
#define B43_MMIO_TXE0_CTL 0x500 |
| 114 |
#define B43_MMIO_TXE0_AUX 0x502 |
| 115 |
#define B43_MMIO_TXE0_TS_LOC 0x504 |
| 116 |
#define B43_MMIO_TXE0_TIME_OUT 0x506 |
| 117 |
#define B43_MMIO_TXE0_WM_0 0x508 |
| 118 |
#define B43_MMIO_TXE0_WM_1 0x50A |
| 119 |
#define B43_MMIO_TXE0_PHYCTL 0x50C |
| 120 |
#define B43_MMIO_TXE0_STATUS 0x50E |
| 121 |
#define B43_MMIO_TXE0_MMPLCP0 0x510 |
| 122 |
#define B43_MMIO_TXE0_MMPLCP1 0x512 |
| 123 |
#define B43_MMIO_TXE0_PHYCTL1 0x514 |
| 124 |
#define B43_MMIO_XMTFIFODEF 0x520 |
| 125 |
#define B43_MMIO_XMTFIFO_FRAME_CNT 0x522 /* core rev>= 16 only */ |
| 126 |
#define B43_MMIO_XMTFIFO_BYTE_CNT 0x524 /* core rev>= 16 only */ |
| 127 |
#define B43_MMIO_XMTFIFO_HEAD 0x526 /* core rev>= 16 only */ |
| 128 |
#define B43_MMIO_XMTFIFO_RD_PTR 0x528 /* core rev>= 16 only */ |
| 129 |
#define B43_MMIO_XMTFIFO_WR_PTR 0x52A /* core rev>= 16 only */ |
| 130 |
#define B43_MMIO_XMTFIFODEF1 0x52C /* core rev>= 16 only */ |
| 131 |
#define B43_MMIO_XMTFIFOCMD 0x540 |
| 132 |
#define B43_MMIO_XMTFIFOFLUSH 0x542 |
| 133 |
#define B43_MMIO_XMTFIFOTHRESH 0x544 |
| 134 |
#define B43_MMIO_XMTFIFORDY 0x546 |
| 135 |
#define B43_MMIO_XMTFIFOPRIRDY 0x548 |
| 136 |
#define B43_MMIO_XMTFIFORQPRI 0x54A |
| 137 |
#define B43_MMIO_XMTTPLATETXPTR 0x54C |
| 138 |
#define B43_MMIO_XMTTPLATEPTR 0x550 |
| 139 |
#define B43_MMIO_SMPL_CLCT_STRPTR 0x552 /* core rev>= 22 only */ |
| 140 |
#define B43_MMIO_SMPL_CLCT_STPPTR 0x554 /* core rev>= 22 only */ |
| 141 |
#define B43_MMIO_SMPL_CLCT_CURPTR 0x556 /* core rev>= 22 only */ |
| 142 |
#define B43_MMIO_XMTTPLATEDATALO 0x560 |
| 143 |
#define B43_MMIO_XMTTPLATEDATAHI 0x562 |
| 144 |
#define B43_MMIO_XMTSEL 0x568 |
| 145 |
#define B43_MMIO_XMTTXCNT 0x56A |
| 146 |
#define B43_MMIO_XMTTXSHMADDR 0x56C |
| 147 |
#define B43_MMIO_TSF_CFP_START_LOW 0x604 |
| 148 |
#define B43_MMIO_TSF_CFP_START_HIGH 0x606 |
| 149 |
#define B43_MMIO_TSF_CFP_PRETBTT 0x612 |
| 150 |
#define B43_MMIO_TSF_CLK_FRAC_LOW 0x62E |
| 151 |
#define B43_MMIO_TSF_CLK_FRAC_HIGH 0x630 |
| 152 |
#define B43_MMIO_TSF_0 0x632 /* core rev < 3 only */ |
| 153 |
#define B43_MMIO_TSF_1 0x634 /* core rev < 3 only */ |
| 154 |
#define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ |
| 155 |
#define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ |
| 156 |
#define B43_MMIO_RNG 0x65A |
| 157 |
#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */ |
| 158 |
#define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ |
| 159 |
#define B43_MMIO_IFSSTAT 0x690 |
| 160 |
#define B43_MMIO_IFSMEDBUSYCTL 0x692 |
| 161 |
#define B43_MMIO_IFTXDUR 0x694 |
| 162 |
#define B43_MMIO_IFSCTL_USE_EDCF 0x0004 |
| 163 |
#define B43_MMIO_POWERUP_DELAY 0x6A8 |
| 164 |
#define B43_MMIO_BTCOEX_CTL 0x6B4 /* Bluetooth Coexistence Control */ |
| 165 |
#define B43_MMIO_BTCOEX_STAT 0x6B6 /* Bluetooth Coexistence Status */ |
| 166 |
#define B43_MMIO_BTCOEX_TXCTL 0x6B8 /* Bluetooth Coexistence Transmit Control */ |
| 167 |
#define B43_MMIO_WEPCTL 0x7C0 |
| 168 |
|
| 169 |
/* SPROM boardflags_lo values */ |
| 170 |
#define B43_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ |
| 171 |
#define B43_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ |
| 172 |
#define B43_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ |
| 173 |
#define B43_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ |
| 174 |
#define B43_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ |
| 175 |
#define B43_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ |
| 176 |
#define B43_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ |
| 177 |
#define B43_BFL_ENETADM 0x0080 /* has ADMtek switch */ |
| 178 |
#define B43_BFL_ENETVLAN 0x0100 /* can do vlan */ |
| 179 |
#define B43_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ |
| 180 |
#define B43_BFL_NOPCI 0x0400 /* leaves PCI floating */ |
| 181 |
#define B43_BFL_FEM 0x0800 /* supports the Front End Module */ |
| 182 |
#define B43_BFL_EXTLNA 0x1000 /* has an external LNA */ |
| 183 |
#define B43_BFL_HGPA 0x2000 /* had high gain PA */ |
| 184 |
#define B43_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ |
| 185 |
#define B43_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ |
| 186 |
|
| 187 |
/* SPROM boardflags_hi values */ |
| 188 |
#define B43_BFH_NOPA 0x0001 /* has no PA */ |
| 189 |
#define B43_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ |
| 190 |
#define B43_BFH_PAREF 0x0004 /* uses the PARef LDO */ |
| 191 |
#define B43_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared |
| 192 |
* with bluetooth */ |
| 193 |
#define B43_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ |
| 194 |
#define B43_BFH_BUCKBOOST 0x0020 /* has buck/booster */ |
| 195 |
#define B43_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna |
| 196 |
* with bluetooth */ |
| 197 |
#define B43_BFH_NOCBUCK 0x0080 |
| 198 |
#define B43_BFH_PALDO 0x0200 |
| 199 |
#define B43_BFH_EXTLNA_5GHZ 0x1000 /* has an external LNA (5GHz mode) */ |
| 200 |
|
| 201 |
/* SPROM boardflags2_lo values */ |
| 202 |
#define B43_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ |
| 203 |
#define B43_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ |
| 204 |
#define B43_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ |
| 205 |
#define B43_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ |
| 206 |
#define B43_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ |
| 207 |
#define B43_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ |
| 208 |
#define B43_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ |
| 209 |
#define B43_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ |
| 210 |
#define B43_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ |
| 211 |
#define B43_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ |
| 212 |
#define B43_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ |
| 213 |
#define B43_BFL2_SINGLEANT_CCK 0x1000 |
| 214 |
#define B43_BFL2_2G_SPUR_WAR 0x2000 |
| 215 |
|
| 216 |
/* SPROM boardflags2_hi values */ |
| 217 |
#define B43_BFH2_GPLL_WAR2 0x0001 |
| 218 |
#define B43_BFH2_IPALVLSHIFT_3P3 0x0002 |
| 219 |
#define B43_BFH2_INTERNDET_TXIQCAL 0x0004 |
| 220 |
#define B43_BFH2_XTALBUFOUTEN 0x0008 |
| 221 |
|
| 222 |
/* GPIO register offset, in both ChipCommon and PCI core. */ |
| 223 |
#define B43_GPIO_CONTROL 0x6c |
| 224 |
|
| 225 |
/* SHM Routing */ |
| 226 |
enum { |
| 227 |
B43_SHM_UCODE, /* Microcode memory */ |
| 228 |
B43_SHM_SHARED, /* Shared memory */ |
| 229 |
B43_SHM_SCRATCH, /* Scratch memory */ |
| 230 |
B43_SHM_HW, /* Internal hardware register */ |
| 231 |
B43_SHM_RCMTA, /* Receive match transmitter address (rev >= 5 only) */ |
| 232 |
}; |
| 233 |
/* SHM Routing modifiers */ |
| 234 |
#define B43_SHM_AUTOINC_R 0x0200 /* Auto-increment address on read */ |
| 235 |
#define B43_SHM_AUTOINC_W 0x0100 /* Auto-increment address on write */ |
| 236 |
#define B43_SHM_AUTOINC_RW (B43_SHM_AUTOINC_R | \ |
| 237 |
B43_SHM_AUTOINC_W) |
| 238 |
|
| 239 |
/* Misc SHM_SHARED offsets */ |
| 240 |
#define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ |
| 241 |
#define B43_SHM_SH_PCTLWDPOS 0x0008 |
| 242 |
#define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */ |
| 243 |
#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities (Opensource firmware only) */ |
| 244 |
#define B43_SHM_SH_PHYVER 0x0050 /* PHY version */ |
| 245 |
#define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */ |
| 246 |
#define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */ |
| 247 |
#define B43_SHM_SH_HOSTF1 0x005E /* Hostflags 1 for ucode options */ |
| 248 |
#define B43_SHM_SH_HOSTF2 0x0060 /* Hostflags 2 for ucode options */ |
| 249 |
#define B43_SHM_SH_HOSTF3 0x0062 /* Hostflags 3 for ucode options */ |
| 250 |
#define B43_SHM_SH_RFATT 0x0064 /* Current radio attenuation value */ |
| 251 |
#define B43_SHM_SH_RADAR 0x0066 /* Radar register */ |
| 252 |
#define B43_SHM_SH_PHYTXNOI 0x006E /* PHY noise directly after TX (lower 8bit only) */ |
| 253 |
#define B43_SHM_SH_RFRXSP1 0x0072 /* RF RX SP Register 1 */ |
| 254 |
#define B43_SHM_SH_HOSTF4 0x0078 /* Hostflags 4 for ucode options */ |
| 255 |
#define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ |
| 256 |
#define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5 Ghz channel */ |
| 257 |
#define B43_SHM_SH_CHAN_40MHZ 0x0200 /* Bit set, if 40 Mhz channel width */ |
| 258 |
#define B43_SHM_SH_MACHW_L 0x00C0 /* Location where the ucode expects the MAC capabilities */ |
| 259 |
#define B43_SHM_SH_MACHW_H 0x00C2 /* Location where the ucode expects the MAC capabilities */ |
| 260 |
#define B43_SHM_SH_HOSTF5 0x00D4 /* Hostflags 5 for ucode options */ |
| 261 |
#define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ |
| 262 |
/* TSSI information */ |
| 263 |
#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */ |
| 264 |
#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */ |
| 265 |
#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */ |
| 266 |
#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */ |
| 267 |
/* SHM_SHARED TX FIFO variables */ |
| 268 |
#define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ |
| 269 |
#define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ |
| 270 |
#define B43_SHM_SH_SIZE45 0x009C /* TX FIFO size for FIFO 4 and 5 */ |
| 271 |
#define B43_SHM_SH_SIZE67 0x009E /* TX FIFO size for FIFO 6 and 7 */ |
| 272 |
/* SHM_SHARED background noise */ |
| 273 |
#define B43_SHM_SH_JSSI0 0x0088 /* Measure JSSI 0 */ |
| 274 |
#define B43_SHM_SH_JSSI1 0x008A /* Measure JSSI 1 */ |
| 275 |
#define B43_SHM_SH_JSSIAUX 0x008C /* Measure JSSI AUX */ |
| 276 |
/* SHM_SHARED crypto engine */ |
| 277 |
#define B43_SHM_SH_DEFAULTIV 0x003C /* Default IV location */ |
| 278 |
#define B43_SHM_SH_NRRXTRANS 0x003E /* # of soft RX transmitter addresses (max 8) */ |
| 279 |
#define B43_SHM_SH_KTP 0x0056 /* Key table pointer */ |
| 280 |
#define B43_SHM_SH_TKIPTSCTTAK 0x0318 |
| 281 |
#define B43_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block (v4 firmware) */ |
| 282 |
#define B43_SHM_SH_PSM 0x05F4 /* PSM transmitter address match block (rev < 5) */ |
| 283 |
/* SHM_SHARED WME variables */ |
| 284 |
#define B43_SHM_SH_EDCFSTAT 0x000E /* EDCF status */ |
| 285 |
#define B43_SHM_SH_TXFCUR 0x0030 /* TXF current index */ |
| 286 |
#define B43_SHM_SH_EDCFQ 0x0240 /* EDCF Q info */ |
| 287 |
/* SHM_SHARED powersave mode related */ |
| 288 |
#define B43_SHM_SH_SLOTT 0x0010 /* Slot time */ |
| 289 |
#define B43_SHM_SH_DTIMPER 0x0012 /* DTIM period */ |
| 290 |
#define B43_SHM_SH_NOSLPZNATDTIM 0x004C /* NOSLPZNAT DTIM */ |
| 291 |
/* SHM_SHARED beacon/AP variables */ |
| 292 |
#define B43_SHM_SH_BT_BASE0 0x0068 /* Beacon template base 0 */ |
| 293 |
#define B43_SHM_SH_BTL0 0x0018 /* Beacon template length 0 */ |
| 294 |
#define B43_SHM_SH_BT_BASE1 0x0468 /* Beacon template base 1 */ |
| 295 |
#define B43_SHM_SH_BTL1 0x001A /* Beacon template length 1 */ |
| 296 |
#define B43_SHM_SH_BTSFOFF 0x001C /* Beacon TSF offset */ |
| 297 |
#define B43_SHM_SH_TIMBPOS 0x001E /* TIM B position in beacon */ |
| 298 |
#define B43_SHM_SH_DTIMP 0x0012 /* DTIP period */ |
| 299 |
#define B43_SHM_SH_MCASTCOOKIE 0x00A8 /* Last bcast/mcast frame ID */ |
| 300 |
#define B43_SHM_SH_SFFBLIM 0x0044 /* Short frame fallback retry limit */ |
| 301 |
#define B43_SHM_SH_LFFBLIM 0x0046 /* Long frame fallback retry limit */ |
| 302 |
#define B43_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word (see PHY TX control) */ |
| 303 |
#define B43_SHM_SH_EXTNPHYCTL 0x00B0 /* Extended bytes for beacon PHY control (N) */ |
| 304 |
#define B43_SHM_SH_BCN_LI 0x00B6 /* beacon listen interval */ |
| 305 |
/* SHM_SHARED ACK/CTS control */ |
| 306 |
#define B43_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word (see PHY TX control) */ |
| 307 |
/* SHM_SHARED probe response variables */ |
| 308 |
#define B43_SHM_SH_PRSSID 0x0160 /* Probe Response SSID */ |
| 309 |
#define B43_SHM_SH_PRSSIDLEN 0x0048 /* Probe Response SSID length */ |
| 310 |
#define B43_SHM_SH_PRTLEN 0x004A /* Probe Response template length */ |
| 311 |
#define B43_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */ |
| 312 |
#define B43_SHM_SH_PRPHYCTL 0x0188 /* Probe Response PHY TX control word */ |
| 313 |
/* SHM_SHARED rate tables */ |
| 314 |
#define B43_SHM_SH_OFDMDIRECT 0x01C0 /* Pointer to OFDM direct map */ |
| 315 |
#define B43_SHM_SH_OFDMBASIC 0x01E0 /* Pointer to OFDM basic rate map */ |
| 316 |
#define B43_SHM_SH_CCKDIRECT 0x0200 /* Pointer to CCK direct map */ |
| 317 |
#define B43_SHM_SH_CCKBASIC 0x0220 /* Pointer to CCK basic rate map */ |
| 318 |
/* SHM_SHARED microcode soft registers */ |
| 319 |
#define B43_SHM_SH_UCODEREV 0x0000 /* Microcode revision */ |
| 320 |
#define B43_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */ |
| 321 |
#define B43_SHM_SH_UCODEDATE 0x0004 /* Microcode date */ |
| 322 |
#define B43_SHM_SH_UCODETIME 0x0006 /* Microcode time */ |
| 323 |
#define B43_SHM_SH_UCODESTAT 0x0040 /* Microcode debug status code */ |
| 324 |
#define B43_SHM_SH_UCODESTAT_INVALID 0 |
| 325 |
#define B43_SHM_SH_UCODESTAT_INIT 1 |
| 326 |
#define B43_SHM_SH_UCODESTAT_ACTIVE 2 |
| 327 |
#define B43_SHM_SH_UCODESTAT_SUSP 3 /* suspended */ |
| 328 |
#define B43_SHM_SH_UCODESTAT_SLEEP 4 /* asleep (PS) */ |
| 329 |
#define B43_SHM_SH_MAXBFRAMES 0x0080 /* Maximum number of frames in a burst */ |
| 330 |
#define B43_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */ |
| 331 |
#define B43_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */ |
| 332 |
/* SHM_SHARED tx iq workarounds */ |
| 333 |
#define B43_SHM_SH_NPHY_TXIQW0 0x0700 |
| 334 |
#define B43_SHM_SH_NPHY_TXIQW1 0x0702 |
| 335 |
#define B43_SHM_SH_NPHY_TXIQW2 0x0704 |
| 336 |
#define B43_SHM_SH_NPHY_TXIQW3 0x0706 |
| 337 |
/* SHM_SHARED tx pwr ctrl */ |
| 338 |
#define B43_SHM_SH_NPHY_TXPWR_INDX0 0x0708 |
| 339 |
#define B43_SHM_SH_NPHY_TXPWR_INDX1 0x070E |
| 340 |
|
| 341 |
/* SHM_SCRATCH offsets */ |
| 342 |
#define B43_SHM_SC_MINCONT 0x0003 /* Minimum contention window */ |
| 343 |
#define B43_SHM_SC_MAXCONT 0x0004 /* Maximum contention window */ |
| 344 |
#define B43_SHM_SC_CURCONT 0x0005 /* Current contention window */ |
| 345 |
#define B43_SHM_SC_SRLIMIT 0x0006 /* Short retry count limit */ |
| 346 |
#define B43_SHM_SC_LRLIMIT 0x0007 /* Long retry count limit */ |
| 347 |
#define B43_SHM_SC_DTIMC 0x0008 /* Current DTIM count */ |
| 348 |
#define B43_SHM_SC_BTL0LEN 0x0015 /* Beacon 0 template length */ |
| 349 |
#define B43_SHM_SC_BTL1LEN 0x0016 /* Beacon 1 template length */ |
| 350 |
#define B43_SHM_SC_SCFB 0x0017 /* Short frame transmit count threshold for rate fallback */ |
| 351 |
#define B43_SHM_SC_LCFB 0x0018 /* Long frame transmit count threshold for rate fallback */ |
| 352 |
|
| 353 |
/* Hardware Radio Enable masks */ |
| 354 |
#define B43_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) |
| 355 |
#define B43_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) |
| 356 |
|
| 357 |
/* HostFlags. See b43_hf_read/write() */ |
| 358 |
#define B43_HF_ANTDIVHELP 0x000000000001ULL /* ucode antenna div helper */ |
| 359 |
#define B43_HF_SYMW 0x000000000002ULL /* G-PHY SYM workaround */ |
| 360 |
#define B43_HF_RXPULLW 0x000000000004ULL /* RX pullup workaround */ |
| 361 |
#define B43_HF_CCKBOOST 0x000000000008ULL /* 4dB CCK power boost (exclusive with OFDM boost) */ |
| 362 |
#define B43_HF_BTCOEX 0x000000000010ULL /* Bluetooth coexistance */ |
| 363 |
#define B43_HF_GDCW 0x000000000020ULL /* G-PHY DC canceller filter bw workaround */ |
| 364 |
#define B43_HF_OFDMPABOOST 0x000000000040ULL /* Enable PA gain boost for OFDM */ |
| 365 |
#define B43_HF_ACPR 0x000000000080ULL /* Disable for Japan, channel 14 */ |
| 366 |
#define B43_HF_EDCF 0x000000000100ULL /* on if WME and MAC suspended */ |
| 367 |
#define B43_HF_TSSIRPSMW 0x000000000200ULL /* TSSI reset PSM ucode workaround */ |
| 368 |
#define B43_HF_20IN40IQW 0x000000000200ULL /* 20 in 40 MHz I/Q workaround (rev >= 13 only) */ |
| 369 |
#define B43_HF_DSCRQ 0x000000000400ULL /* Disable slow clock request in ucode */ |
| 370 |
#define B43_HF_ACIW 0x000000000800ULL /* ACI workaround: shift bits by 2 on PHY CRS */ |
| 371 |
#define B43_HF_2060W 0x000000001000ULL /* 2060 radio workaround */ |
| 372 |
#define B43_HF_RADARW 0x000000002000ULL /* Radar workaround */ |
| 373 |
#define B43_HF_USEDEFKEYS 0x000000004000ULL /* Enable use of default keys */ |
| 374 |
#define B43_HF_AFTERBURNER 0x000000008000ULL /* Afterburner enabled */ |
| 375 |
#define B43_HF_BT4PRIOCOEX 0x000000010000ULL /* Bluetooth 4-priority coexistance */ |
| 376 |
#define B43_HF_FWKUP 0x000000020000ULL /* Fast wake-up ucode */ |
| 377 |
#define B43_HF_VCORECALC 0x000000040000ULL /* Force VCO recalculation when powering up synthpu */ |
| 378 |
#define B43_HF_PCISCW 0x000000080000ULL /* PCI slow clock workaround */ |
| 379 |
#define B43_HF_4318TSSI 0x000000200000ULL /* 4318 TSSI */ |
| 380 |
#define B43_HF_FBCMCFIFO 0x000000400000ULL /* Flush bcast/mcast FIFO immediately */ |
| 381 |
#define B43_HF_HWPCTL 0x000000800000ULL /* Enable hardwarre power control */ |
| 382 |
#define B43_HF_BTCOEXALT 0x000001000000ULL /* Bluetooth coexistance in alternate pins */ |
| 383 |
#define B43_HF_TXBTCHECK 0x000002000000ULL /* Bluetooth check during transmission */ |
| 384 |
#define B43_HF_SKCFPUP 0x000004000000ULL /* Skip CFP update */ |
| 385 |
#define B43_HF_N40W 0x000008000000ULL /* N PHY 40 MHz workaround (rev >= 13 only) */ |
| 386 |
#define B43_HF_ANTSEL 0x000020000000ULL /* Antenna selection (for testing antenna div.) */ |
| 387 |
#define B43_HF_BT3COEXT 0x000020000000ULL /* Bluetooth 3-wire coexistence (rev >= 13 only) */ |
| 388 |
#define B43_HF_BTCANT 0x000040000000ULL /* Bluetooth coexistence (antenna mode) (rev >= 13 only) */ |
| 389 |
#define B43_HF_ANTSELEN 0x000100000000ULL /* Antenna selection enabled (rev >= 13 only) */ |
| 390 |
#define B43_HF_ANTSELMODE 0x000200000000ULL /* Antenna selection mode (rev >= 13 only) */ |
| 391 |
#define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */ |
| 392 |
#define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */ |
| 393 |
|
| 394 |
/* Firmware capabilities field in SHM (Opensource firmware only) */ |
| 395 |
#define B43_FWCAPA_HWCRYPTO 0x0001 |
| 396 |
#define B43_FWCAPA_QOS 0x0002 |
| 397 |
|
| 398 |
/* MacFilter offsets. */ |
| 399 |
#define B43_MACFILTER_SELF 0x0000 |
| 400 |
#define B43_MACFILTER_BSSID 0x0003 |
| 401 |
|
| 402 |
/* PowerControl */ |
| 403 |
#define B43_PCTL_IN 0xB0 |
| 404 |
#define B43_PCTL_OUT 0xB4 |
| 405 |
#define B43_PCTL_OUTENABLE 0xB8 |
| 406 |
#define B43_PCTL_XTAL_POWERUP 0x40 |
| 407 |
#define B43_PCTL_PLL_POWERDOWN 0x80 |
| 408 |
|
| 409 |
/* PowerControl Clock Modes */ |
| 410 |
#define B43_PCTL_CLK_FAST 0x00 |
| 411 |
#define B43_PCTL_CLK_SLOW 0x01 |
| 412 |
#define B43_PCTL_CLK_DYNAMIC 0x02 |
| 413 |
|
| 414 |
#define B43_PCTL_FORCE_SLOW 0x0800 |
| 415 |
#define B43_PCTL_FORCE_PLL 0x1000 |
| 416 |
#define B43_PCTL_DYN_XTAL 0x2000 |
| 417 |
|
| 418 |
/* PHYVersioning */ |
| 419 |
#define B43_PHYTYPE_A 0x00 |
| 420 |
#define B43_PHYTYPE_B 0x01 |
| 421 |
#define B43_PHYTYPE_G 0x02 |
| 422 |
#define B43_PHYTYPE_N 0x04 |
| 423 |
#define B43_PHYTYPE_LP 0x05 |
| 424 |
#define B43_PHYTYPE_SSLPN 0x06 |
| 425 |
#define B43_PHYTYPE_HT 0x07 |
| 426 |
#define B43_PHYTYPE_LCN 0x08 |
| 427 |
#define B43_PHYTYPE_LCNXN 0x09 |
| 428 |
#define B43_PHYTYPE_LCN40 0x0a |
| 429 |
#define B43_PHYTYPE_AC 0x0b |
| 430 |
|
| 431 |
/* PHYRegisters */ |
| 432 |
#define B43_PHY_ILT_A_CTRL 0x0072 |
| 433 |
#define B43_PHY_ILT_A_DATA1 0x0073 |
| 434 |
#define B43_PHY_ILT_A_DATA2 0x0074 |
| 435 |
#define B43_PHY_G_LO_CONTROL 0x0810 |
| 436 |
#define B43_PHY_ILT_G_CTRL 0x0472 |
| 437 |
#define B43_PHY_ILT_G_DATA1 0x0473 |
| 438 |
#define B43_PHY_ILT_G_DATA2 0x0474 |
| 439 |
#define B43_PHY_A_PCTL 0x007B |
| 440 |
#define B43_PHY_G_PCTL 0x0029 |
| 441 |
#define B43_PHY_A_CRS 0x0029 |
| 442 |
#define B43_PHY_RADIO_BITFIELD 0x0401 |
| 443 |
#define B43_PHY_G_CRS 0x0429 |
| 444 |
#define B43_PHY_NRSSILT_CTRL 0x0803 |
| 445 |
#define B43_PHY_NRSSILT_DATA 0x0804 |
| 446 |
|
| 447 |
/* RadioRegisters */ |
| 448 |
#define B43_RADIOCTL_ID 0x01 |
| 449 |
|
| 450 |
/* MAC Control bitfield */ |
| 451 |
#define B43_MACCTL_ENABLED 0x00000001 /* MAC Enabled */ |
| 452 |
#define B43_MACCTL_PSM_RUN 0x00000002 /* Run Microcode */ |
| 453 |
#define B43_MACCTL_PSM_JMP0 0x00000004 /* Microcode jump to 0 */ |
| 454 |
#define B43_MACCTL_SHM_ENABLED 0x00000100 /* SHM Enabled */ |
| 455 |
#define B43_MACCTL_SHM_UPPER 0x00000200 /* SHM Upper */ |
| 456 |
#define B43_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */ |
| 457 |
#define B43_MACCTL_PSM_DBG 0x00002000 /* Microcode debugging enabled */ |
| 458 |
#define B43_MACCTL_GPOUTSMSK 0x0000C000 /* GPOUT Select Mask */ |
| 459 |
#define B43_MACCTL_BE 0x00010000 /* Big Endian mode */ |
| 460 |
#define B43_MACCTL_INFRA 0x00020000 /* Infrastructure mode */ |
| 461 |
#define B43_MACCTL_AP 0x00040000 /* AccessPoint mode */ |
| 462 |
#define B43_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */ |
| 463 |
#define B43_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */ |
| 464 |
#define B43_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep frames with bad PLCP */ |
| 465 |
#define B43_MACCTL_PHY_LOCK 0x00200000 |
| 466 |
#define B43_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */ |
| 467 |
#define B43_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */ |
| 468 |
#define B43_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */ |
| 469 |
#define B43_MACCTL_HWPS 0x02000000 /* Hardware Power Saving */ |
| 470 |
#define B43_MACCTL_AWAKE 0x04000000 /* Device is awake */ |
| 471 |
#define B43_MACCTL_CLOSEDNET 0x08000000 /* Closed net (no SSID bcast) */ |
| 472 |
#define B43_MACCTL_TBTTHOLD 0x10000000 /* TBTT Hold */ |
| 473 |
#define B43_MACCTL_DISCTXSTAT 0x20000000 /* Discard TX status */ |
| 474 |
#define B43_MACCTL_DISCPMQ 0x40000000 /* Discard Power Management Queue */ |
| 475 |
#define B43_MACCTL_GMODE 0x80000000 /* G Mode */ |
| 476 |
|
| 477 |
/* MAC Command bitfield */ |
| 478 |
#define B43_MACCMD_BEACON0_VALID 0x00000001 /* Beacon 0 in template RAM is busy/valid */ |
| 479 |
#define B43_MACCMD_BEACON1_VALID 0x00000002 /* Beacon 1 in template RAM is busy/valid */ |
| 480 |
#define B43_MACCMD_DFQ_VALID 0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */ |
| 481 |
#define B43_MACCMD_CCA 0x00000008 /* Clear channel assessment */ |
| 482 |
#define B43_MACCMD_BGNOISE 0x00000010 /* Background noise */ |
| 483 |
|
| 484 |
/* B43_MMIO_PSM_PHY_HDR bits */ |
| 485 |
#define B43_PSM_HDR_MAC_PHY_RESET 0x00000001 |
| 486 |
#define B43_PSM_HDR_MAC_PHY_CLOCK_EN 0x00000002 |
| 487 |
#define B43_PSM_HDR_MAC_PHY_FORCE_CLK 0x00000004 |
| 488 |
|
| 489 |
/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */ |
| 490 |
#define B43_BCMA_CLKCTLST_80211_PLL_REQ 0x00000100 |
| 491 |
#define B43_BCMA_CLKCTLST_PHY_PLL_REQ 0x00000200 |
| 492 |
#define B43_BCMA_CLKCTLST_80211_PLL_ST 0x01000000 |
| 493 |
#define B43_BCMA_CLKCTLST_PHY_PLL_ST 0x02000000 |
| 494 |
|
| 495 |
/* BCMA 802.11 core specific IO Control (BCMA_IOCTL) flags */ |
| 496 |
#define B43_BCMA_IOCTL_PHY_CLKEN 0x00000004 /* PHY Clock Enable */ |
| 497 |
#define B43_BCMA_IOCTL_PHY_RESET 0x00000008 /* PHY Reset */ |
| 498 |
#define B43_BCMA_IOCTL_MACPHYCLKEN 0x00000010 /* MAC PHY Clock Control Enable */ |
| 499 |
#define B43_BCMA_IOCTL_PLLREFSEL 0x00000020 /* PLL Frequency Reference Select */ |
| 500 |
#define B43_BCMA_IOCTL_PHY_BW 0x000000C0 /* PHY band width and clock speed mask (N-PHY+ only?) */ |
| 501 |
#define B43_BCMA_IOCTL_PHY_BW_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */ |
| 502 |
#define B43_BCMA_IOCTL_PHY_BW_20MHZ 0x00000040 /* 20 MHz bandwidth, 80 MHz PHY */ |
| 503 |
#define B43_BCMA_IOCTL_PHY_BW_40MHZ 0x00000080 /* 40 MHz bandwidth, 160 MHz PHY */ |
| 504 |
#define B43_BCMA_IOCTL_PHY_BW_80MHZ 0x000000C0 /* 80 MHz bandwidth */ |
| 505 |
#define B43_BCMA_IOCTL_DAC 0x00000300 /* Highspeed DAC mode control field */ |
| 506 |
#define B43_BCMA_IOCTL_GMODE 0x00002000 /* G Mode Enable */ |
| 507 |
|
| 508 |
/* BCMA 802.11 core specific IO status (BCMA_IOST) flags */ |
| 509 |
#define B43_BCMA_IOST_2G_PHY 0x00000001 /* 2.4G capable phy */ |
| 510 |
#define B43_BCMA_IOST_5G_PHY 0x00000002 /* 5G capable phy */ |
| 511 |
#define B43_BCMA_IOST_FASTCLKA 0x00000004 /* Fast Clock Available */ |
| 512 |
#define B43_BCMA_IOST_DUALB_PHY 0x00000008 /* Dualband phy */ |
| 513 |
|
| 514 |
/* 802.11 core specific TM State Low (SSB_TMSLOW) flags */ |
| 515 |
#define B43_TMSLOW_GMODE 0x20000000 /* G Mode Enable */ |
| 516 |
#define B43_TMSLOW_PHY_BANDWIDTH 0x00C00000 /* PHY band width and clock speed mask (N-PHY only) */ |
| 517 |
#define B43_TMSLOW_PHY_BANDWIDTH_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */ |
| 518 |
#define B43_TMSLOW_PHY_BANDWIDTH_20MHZ 0x00400000 /* 20 MHz bandwidth, 80 MHz PHY */ |
| 519 |
#define B43_TMSLOW_PHY_BANDWIDTH_40MHZ 0x00800000 /* 40 MHz bandwidth, 160 MHz PHY */ |
| 520 |
#define B43_TMSLOW_PLLREFSEL 0x00200000 /* PLL Frequency Reference Select (rev >= 5) */ |
| 521 |
#define B43_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Control Enable (rev >= 5) */ |
| 522 |
#define B43_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */ |
| 523 |
#define B43_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */ |
| 524 |
|
| 525 |
/* 802.11 core specific TM State High (SSB_TMSHIGH) flags */ |
| 526 |
#define B43_TMSHIGH_DUALBAND_PHY 0x00080000 /* Dualband PHY available */ |
| 527 |
#define B43_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available (rev >= 5) */ |
| 528 |
#define B43_TMSHIGH_HAVE_5GHZ_PHY 0x00020000 /* 5 GHz PHY available (rev >= 5) */ |
| 529 |
#define B43_TMSHIGH_HAVE_2GHZ_PHY 0x00010000 /* 2.4 GHz PHY available (rev >= 5) */ |
| 530 |
|
| 531 |
/* Generic-Interrupt reasons. */ |
| 532 |
#define B43_IRQ_MAC_SUSPENDED 0x00000001 |
| 533 |
#define B43_IRQ_BEACON 0x00000002 |
| 534 |
#define B43_IRQ_TBTT_INDI 0x00000004 |
| 535 |
#define B43_IRQ_BEACON_TX_OK 0x00000008 |
| 536 |
#define B43_IRQ_BEACON_CANCEL 0x00000010 |
| 537 |
#define B43_IRQ_ATIM_END 0x00000020 |
| 538 |
#define B43_IRQ_PMQ 0x00000040 |
| 539 |
#define B43_IRQ_PIO_WORKAROUND 0x00000100 |
| 540 |
#define B43_IRQ_MAC_TXERR 0x00000200 |
| 541 |
#define B43_IRQ_PHY_TXERR 0x00000800 |
| 542 |
#define B43_IRQ_PMEVENT 0x00001000 |
| 543 |
#define B43_IRQ_TIMER0 0x00002000 |
| 544 |
#define B43_IRQ_TIMER1 0x00004000 |
| 545 |
#define B43_IRQ_DMA 0x00008000 |
| 546 |
#define B43_IRQ_TXFIFO_FLUSH_OK 0x00010000 |
| 547 |
#define B43_IRQ_CCA_MEASURE_OK 0x00020000 |
| 548 |
#define B43_IRQ_NOISESAMPLE_OK 0x00040000 |
| 549 |
#define B43_IRQ_UCODE_DEBUG 0x08000000 |
| 550 |
#define B43_IRQ_RFKILL 0x10000000 |
| 551 |
#define B43_IRQ_TX_OK 0x20000000 |
| 552 |
#define B43_IRQ_PHY_G_CHANGED 0x40000000 |
| 553 |
#define B43_IRQ_TIMEOUT 0x80000000 |
| 554 |
|
| 555 |
#define B43_IRQ_ALL 0xFFFFFFFF |
| 556 |
#define B43_IRQ_MASKTEMPLATE (B43_IRQ_TBTT_INDI | \ |
| 557 |
B43_IRQ_ATIM_END | \ |
| 558 |
B43_IRQ_PMQ | \ |
| 559 |
B43_IRQ_MAC_TXERR | \ |
| 560 |
B43_IRQ_PHY_TXERR | \ |
| 561 |
B43_IRQ_DMA | \ |
| 562 |
B43_IRQ_TXFIFO_FLUSH_OK | \ |
| 563 |
B43_IRQ_NOISESAMPLE_OK | \ |
| 564 |
B43_IRQ_UCODE_DEBUG | \ |
| 565 |
B43_IRQ_RFKILL | \ |
| 566 |
B43_IRQ_TX_OK) |
| 567 |
|
| 568 |
/* The firmware register to fetch the debug-IRQ reason from. */ |
| 569 |
#define B43_DEBUGIRQ_REASON_REG 63 |
| 570 |
/* Debug-IRQ reasons. */ |
| 571 |
#define B43_DEBUGIRQ_PANIC 0 /* The firmware panic'ed */ |
| 572 |
#define B43_DEBUGIRQ_DUMP_SHM 1 /* Dump shared SHM */ |
| 573 |
#define B43_DEBUGIRQ_DUMP_REGS 2 /* Dump the microcode registers */ |
| 574 |
#define B43_DEBUGIRQ_MARKER 3 /* A "marker" was thrown by the firmware. */ |
| 575 |
#define B43_DEBUGIRQ_ACK 0xFFFF /* The host writes that to ACK the IRQ */ |
| 576 |
|
| 577 |
/* The firmware register that contains the "marker" line. */ |
| 578 |
#define B43_MARKER_ID_REG 2 |
| 579 |
#define B43_MARKER_LINE_REG 3 |
| 580 |
|
| 581 |
/* The firmware register to fetch the panic reason from. */ |
| 582 |
#define B43_FWPANIC_REASON_REG 3 |
| 583 |
/* Firmware panic reason codes */ |
| 584 |
#define B43_FWPANIC_DIE 0 /* Firmware died. Don't auto-restart it. */ |
| 585 |
#define B43_FWPANIC_RESTART 1 /* Firmware died. Schedule a controller reset. */ |
| 586 |
|
| 587 |
/* The firmware register that contains the watchdog counter. */ |
| 588 |
#define B43_WATCHDOG_REG 1 |
| 589 |
|
| 590 |
/* Device specific rate values. |
| 591 |
* The actual values defined here are (rate_in_mbps * 2). |
| 592 |
* Some code depends on this. Don't change it. */ |
| 593 |
#define B43_CCK_RATE_1MB 0x02 |
| 594 |
#define B43_CCK_RATE_2MB 0x04 |
| 595 |
#define B43_CCK_RATE_5MB 0x0B |
| 596 |
#define B43_CCK_RATE_11MB 0x16 |
| 597 |
#define B43_OFDM_RATE_6MB 0x0C |
| 598 |
#define B43_OFDM_RATE_9MB 0x12 |
| 599 |
#define B43_OFDM_RATE_12MB 0x18 |
| 600 |
#define B43_OFDM_RATE_18MB 0x24 |
| 601 |
#define B43_OFDM_RATE_24MB 0x30 |
| 602 |
#define B43_OFDM_RATE_36MB 0x48 |
| 603 |
#define B43_OFDM_RATE_48MB 0x60 |
| 604 |
#define B43_OFDM_RATE_54MB 0x6C |
| 605 |
/* Convert a b43 rate value to a rate in 100kbps */ |
| 606 |
#define B43_RATE_TO_BASE100KBPS(rate) (((rate) * 10) / 2) |
| 607 |
|
| 608 |
#define B43_DEFAULT_SHORT_RETRY_LIMIT 7 |
| 609 |
#define B43_DEFAULT_LONG_RETRY_LIMIT 4 |
| 610 |
|
| 611 |
#define B43_PHY_TX_BADNESS_LIMIT 1000 |
| 612 |
|
| 613 |
/* Max size of a security key */ |
| 614 |
#define B43_SEC_KEYSIZE 16 |
| 615 |
/* Max number of group keys */ |
| 616 |
#define B43_NR_GROUP_KEYS 4 |
| 617 |
/* Max number of pairwise keys */ |
| 618 |
#define B43_NR_PAIRWISE_KEYS 50 |
| 619 |
/* Security algorithms. */ |
| 620 |
enum { |
| 621 |
B43_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ |
| 622 |
B43_SEC_ALGO_WEP40, |
| 623 |
B43_SEC_ALGO_TKIP, |
| 624 |
B43_SEC_ALGO_AES, |
| 625 |
B43_SEC_ALGO_WEP104, |
| 626 |
B43_SEC_ALGO_AES_LEGACY, |
| 627 |
}; |
| 628 |
|
| 629 |
struct b43_dmaring; |
| 630 |
|
| 631 |
/* The firmware file header */ |
| 632 |
#define B43_FW_TYPE_UCODE 'u' |
| 633 |
#define B43_FW_TYPE_PCM 'p' |
| 634 |
#define B43_FW_TYPE_IV 'i' |
| 635 |
struct b43_fw_header { |
| 636 |
/* File type */ |
| 637 |
u8 type; |
| 638 |
/* File format version */ |
| 639 |
u8 ver; |
| 640 |
u8 __padding[2]; |
| 641 |
/* Size of the data. For ucode and PCM this is in bytes. |
| 642 |
* For IV this is number-of-ivs. */ |
| 643 |
__be32 size; |
| 644 |
} __packed; |
| 645 |
|
| 646 |
/* Initial Value file format */ |
| 647 |
#define B43_IV_OFFSET_MASK 0x7FFF |
| 648 |
#define B43_IV_32BIT 0x8000 |
| 649 |
struct b43_iv { |
| 650 |
__be16 offset_size; |
| 651 |
union { |
| 652 |
__be16 d16; |
| 653 |
__be32 d32; |
| 654 |
} __packed data; |
| 655 |
} __packed; |
| 656 |
|
| 657 |
|
| 658 |
/* Data structures for DMA transmission, per 80211 core. */ |
| 659 |
struct b43_dma { |
| 660 |
struct b43_dmaring *tx_ring_AC_BK; /* Background */ |
| 661 |
struct b43_dmaring *tx_ring_AC_BE; /* Best Effort */ |
| 662 |
struct b43_dmaring *tx_ring_AC_VI; /* Video */ |
| 663 |
struct b43_dmaring *tx_ring_AC_VO; /* Voice */ |
| 664 |
struct b43_dmaring *tx_ring_mcast; /* Multicast */ |
| 665 |
|
| 666 |
struct b43_dmaring *rx_ring; |
| 667 |
|
| 668 |
u32 translation; /* Routing bits */ |
| 669 |
bool translation_in_low; /* Should translation bit go into low addr? */ |
| 670 |
bool parity; /* Check for parity */ |
| 671 |
}; |
| 672 |
|
| 673 |
struct b43_pio_txqueue; |
| 674 |
struct b43_pio_rxqueue; |
| 675 |
|
| 676 |
/* Data structures for PIO transmission, per 80211 core. */ |
| 677 |
struct b43_pio { |
| 678 |
struct b43_pio_txqueue *tx_queue_AC_BK; /* Background */ |
| 679 |
struct b43_pio_txqueue *tx_queue_AC_BE; /* Best Effort */ |
| 680 |
struct b43_pio_txqueue *tx_queue_AC_VI; /* Video */ |
| 681 |
struct b43_pio_txqueue *tx_queue_AC_VO; /* Voice */ |
| 682 |
struct b43_pio_txqueue *tx_queue_mcast; /* Multicast */ |
| 683 |
|
| 684 |
struct b43_pio_rxqueue *rx_queue; |
| 685 |
}; |
| 686 |
|
| 687 |
/* Context information for a noise calculation (Link Quality). */ |
| 688 |
struct b43_noise_calculation { |
| 689 |
bool calculation_running; |
| 690 |
u8 nr_samples; |
| 691 |
s8 samples[8][4]; |
| 692 |
}; |
| 693 |
|
| 694 |
struct b43_stats { |
| 695 |
u8 link_noise; |
| 696 |
}; |
| 697 |
|
| 698 |
struct b43_key { |
| 699 |
/* If keyconf is NULL, this key is disabled. |
| 700 |
* keyconf is a cookie. Don't derefenrence it outside of the set_key |
| 701 |
* path, because b43 doesn't own it. */ |
| 702 |
struct ieee80211_key_conf *keyconf; |
| 703 |
u8 algorithm; |
| 704 |
}; |
| 705 |
|
| 706 |
/* SHM offsets to the QOS data structures for the 4 different queues. */ |
| 707 |
#define B43_QOS_QUEUE_NUM 4 |
| 708 |
#define B43_QOS_PARAMS(queue) (B43_SHM_SH_EDCFQ + \ |
| 709 |
(B43_NR_QOSPARAMS * sizeof(u16) * (queue))) |
| 710 |
#define B43_QOS_BACKGROUND B43_QOS_PARAMS(0) |
| 711 |
#define B43_QOS_BESTEFFORT B43_QOS_PARAMS(1) |
| 712 |
#define B43_QOS_VIDEO B43_QOS_PARAMS(2) |
| 713 |
#define B43_QOS_VOICE B43_QOS_PARAMS(3) |
| 714 |
|
| 715 |
/* QOS parameter hardware data structure offsets. */ |
| 716 |
#define B43_NR_QOSPARAMS 16 |
| 717 |
enum { |
| 718 |
B43_QOSPARAM_TXOP = 0, |
| 719 |
B43_QOSPARAM_CWMIN, |
| 720 |
B43_QOSPARAM_CWMAX, |
| 721 |
B43_QOSPARAM_CWCUR, |
| 722 |
B43_QOSPARAM_AIFS, |
| 723 |
B43_QOSPARAM_BSLOTS, |
| 724 |
B43_QOSPARAM_REGGAP, |
| 725 |
B43_QOSPARAM_STATUS, |
| 726 |
}; |
| 727 |
|
| 728 |
/* QOS parameters for a queue. */ |
| 729 |
struct b43_qos_params { |
| 730 |
/* The QOS parameters */ |
| 731 |
struct ieee80211_tx_queue_params p; |
| 732 |
}; |
| 733 |
|
| 734 |
struct b43_wl; |
| 735 |
|
| 736 |
/* The type of the firmware file. */ |
| 737 |
enum b43_firmware_file_type { |
| 738 |
B43_FWTYPE_PROPRIETARY, |
| 739 |
B43_FWTYPE_OPENSOURCE, |
| 740 |
B43_NR_FWTYPES, |
| 741 |
}; |
| 742 |
|
| 743 |
/* Context data for fetching firmware. */ |
| 744 |
struct b43_request_fw_context { |
| 745 |
/* The device we are requesting the fw for. */ |
| 746 |
struct b43_wldev *dev; |
| 747 |
/* a pointer to the firmware object */ |
| 748 |
const struct firmware *blob; |
| 749 |
/* The type of firmware to request. */ |
| 750 |
enum b43_firmware_file_type req_type; |
| 751 |
/* Error messages for each firmware type. */ |
| 752 |
char errors[B43_NR_FWTYPES][128]; |
| 753 |
/* Temporary buffer for storing the firmware name. */ |
| 754 |
char fwname[64]; |
| 755 |
/* A fatal error occurred while requesting. Firmware request |
| 756 |
* can not continue, as any other request will also fail. */ |
| 757 |
int fatal_failure; |
| 758 |
}; |
| 759 |
|
| 760 |
/* In-memory representation of a cached microcode file. */ |
| 761 |
struct b43_firmware_file { |
| 762 |
const char *filename; |
| 763 |
const struct firmware *data; |
| 764 |
/* Type of the firmware file name. Note that this does only indicate |
| 765 |
* the type by the firmware name. NOT the file contents. |
| 766 |
* If you want to check for proprietary vs opensource, use (struct b43_firmware)->opensource |
| 767 |
* instead! The (struct b43_firmware)->opensource flag is derived from the actual firmware |
| 768 |
* binary code, not just the filename. |
| 769 |
*/ |
| 770 |
enum b43_firmware_file_type type; |
| 771 |
}; |
| 772 |
|
| 773 |
enum b43_firmware_hdr_format { |
| 774 |
B43_FW_HDR_598, |
| 775 |
B43_FW_HDR_410, |
| 776 |
B43_FW_HDR_351, |
| 777 |
}; |
| 778 |
|
| 779 |
/* Pointers to the firmware data and meta information about it. */ |
| 780 |
struct b43_firmware { |
| 781 |
/* Microcode */ |
| 782 |
struct b43_firmware_file ucode; |
| 783 |
/* PCM code */ |
| 784 |
struct b43_firmware_file pcm; |
| 785 |
/* Initial MMIO values for the firmware */ |
| 786 |
struct b43_firmware_file initvals; |
| 787 |
/* Initial MMIO values for the firmware, band-specific */ |
| 788 |
struct b43_firmware_file initvals_band; |
| 789 |
|
| 790 |
/* Firmware revision */ |
| 791 |
u16 rev; |
| 792 |
/* Firmware patchlevel */ |
| 793 |
u16 patch; |
| 794 |
|
| 795 |
/* Format of header used by firmware */ |
| 796 |
enum b43_firmware_hdr_format hdr_format; |
| 797 |
|
| 798 |
/* Set to true, if we are using an opensource firmware. |
| 799 |
* Use this to check for proprietary vs opensource. */ |
| 800 |
bool opensource; |
| 801 |
/* Set to true, if the core needs a PCM firmware, but |
| 802 |
* we failed to load one. This is always false for |
| 803 |
* core rev > 10, as these don't need PCM firmware. */ |
| 804 |
bool pcm_request_failed; |
| 805 |
}; |
| 806 |
|
| 807 |
enum b43_band { |
| 808 |
B43_BAND_2G = 0, |
| 809 |
B43_BAND_5G_LO = 1, |
| 810 |
B43_BAND_5G_MI = 2, |
| 811 |
B43_BAND_5G_HI = 3, |
| 812 |
}; |
| 813 |
|
| 814 |
/* Device (802.11 core) initialization status. */ |
| 815 |
enum { |
| 816 |
B43_STAT_UNINIT = 0, /* Uninitialized. */ |
| 817 |
B43_STAT_INITIALIZED = 1, /* Initialized, but not started, yet. */ |
| 818 |
B43_STAT_STARTED = 2, /* Up and running. */ |
| 819 |
}; |
| 820 |
#define b43_status(wldev) atomic_read(&(wldev)->__init_status) |
| 821 |
#define b43_set_status(wldev, stat) do { \ |
| 822 |
atomic_set(&(wldev)->__init_status, (stat)); \ |
| 823 |
smp_wmb(); \ |
| 824 |
} while (0) |
| 825 |
|
| 826 |
/* Data structure for one wireless device (802.11 core) */ |
| 827 |
struct b43_wldev { |
| 828 |
struct b43_bus_dev *dev; |
| 829 |
struct b43_wl *wl; |
| 830 |
/* a completion event structure needed if this call is asynchronous */ |
| 831 |
struct completion fw_load_complete; |
| 832 |
|
| 833 |
/* The device initialization status. |
| 834 |
* Use b43_status() to query. */ |
| 835 |
atomic_t __init_status; |
| 836 |
|
| 837 |
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */ |
| 838 |
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ |
| 839 |
bool radio_hw_enable; /* saved state of radio hardware enabled state */ |
| 840 |
bool qos_enabled; /* TRUE, if QoS is used. */ |
| 841 |
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ |
| 842 |
bool use_pio; /* TRUE if next init should use PIO */ |
| 843 |
|
| 844 |
/* PHY/Radio device. */ |
| 845 |
struct b43_phy phy; |
| 846 |
|
| 847 |
union { |
| 848 |
/* DMA engines. */ |
| 849 |
struct b43_dma dma; |
| 850 |
/* PIO engines. */ |
| 851 |
struct b43_pio pio; |
| 852 |
}; |
| 853 |
/* Use b43_using_pio_transfers() to check whether we are using |
| 854 |
* DMA or PIO data transfers. */ |
| 855 |
bool __using_pio_transfers; |
| 856 |
|
| 857 |
/* Various statistics about the physical device. */ |
| 858 |
struct b43_stats stats; |
| 859 |
|
| 860 |
/* Reason code of the last interrupt. */ |
| 861 |
u32 irq_reason; |
| 862 |
u32 dma_reason[6]; |
| 863 |
/* The currently active generic-interrupt mask. */ |
| 864 |
u32 irq_mask; |
| 865 |
|
| 866 |
/* Link Quality calculation context. */ |
| 867 |
struct b43_noise_calculation noisecalc; |
| 868 |
/* if > 0 MAC is suspended. if == 0 MAC is enabled. */ |
| 869 |
int mac_suspended; |
| 870 |
|
| 871 |
/* Periodic tasks */ |
| 872 |
struct delayed_work periodic_work; |
| 873 |
unsigned int periodic_state; |
| 874 |
|
| 875 |
struct work_struct restart_work; |
| 876 |
|
| 877 |
/* encryption/decryption */ |
| 878 |
u16 ktp; /* Key table pointer */ |
| 879 |
struct b43_key key[B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS]; |
| 880 |
|
| 881 |
/* Firmware data */ |
| 882 |
struct b43_firmware fw; |
| 883 |
|
| 884 |
/* Devicelist in struct b43_wl (all 802.11 cores) */ |
| 885 |
struct list_head list; |
| 886 |
|
| 887 |
/* Debugging stuff follows. */ |
| 888 |
#ifdef CONFIG_B43_DEBUG |
| 889 |
struct b43_dfsentry *dfsentry; |
| 890 |
unsigned int irq_count; |
| 891 |
unsigned int irq_bit_count[32]; |
| 892 |
unsigned int tx_count; |
| 893 |
unsigned int rx_count; |
| 894 |
#endif |
| 895 |
}; |
| 896 |
|
| 897 |
/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ |
| 898 |
struct b43_wl { |
| 899 |
/* Pointer to the active wireless device on this chip */ |
| 900 |
struct b43_wldev *current_dev; |
| 901 |
/* Pointer to the ieee80211 hardware data structure */ |
| 902 |
struct ieee80211_hw *hw; |
| 903 |
|
| 904 |
/* Global driver mutex. Every operation must run with this mutex locked. */ |
| 905 |
struct mutex mutex; |
| 906 |
/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ |
| 907 |
* handler, only. This basically is just the IRQ mask register. */ |
| 908 |
spinlock_t hardirq_lock; |
| 909 |
|
| 910 |
/* Set this if we call ieee80211_register_hw() and check if we call |
| 911 |
* ieee80211_unregister_hw(). */ |
| 912 |
bool hw_registered; |
| 913 |
|
| 914 |
/* We can only have one operating interface (802.11 core) |
| 915 |
* at a time. General information about this interface follows. |
| 916 |
*/ |
| 917 |
|
| 918 |
struct ieee80211_vif *vif; |
| 919 |
/* The MAC address of the operating interface. */ |
| 920 |
u8 mac_addr[ETH_ALEN]; |
| 921 |
/* Current BSSID */ |
| 922 |
u8 bssid[ETH_ALEN]; |
| 923 |
/* Interface type. (NL80211_IFTYPE_XXX) */ |
| 924 |
int if_type; |
| 925 |
/* Is the card operating in AP, STA or IBSS mode? */ |
| 926 |
bool operating; |
| 927 |
/* filter flags */ |
| 928 |
unsigned int filter_flags; |
| 929 |
/* Stats about the wireless interface */ |
| 930 |
struct ieee80211_low_level_stats ieee_stats; |
| 931 |
|
| 932 |
#ifdef CONFIG_B43_HWRNG |
| 933 |
struct hwrng rng; |
| 934 |
bool rng_initialized; |
| 935 |
char rng_name[30 + 1]; |
| 936 |
#endif /* CONFIG_B43_HWRNG */ |
| 937 |
|
| 938 |
bool radiotap_enabled; |
| 939 |
bool radio_enabled; |
| 940 |
|
| 941 |
/* The beacon we are currently using (AP or IBSS mode). */ |
| 942 |
struct sk_buff *current_beacon; |
| 943 |
bool beacon0_uploaded; |
| 944 |
bool beacon1_uploaded; |
| 945 |
bool beacon_templates_virgin; /* Never wrote the templates? */ |
| 946 |
struct work_struct beacon_update_trigger; |
| 947 |
spinlock_t beacon_lock; |
| 948 |
|
| 949 |
/* The current QOS parameters for the 4 queues. */ |
| 950 |
struct b43_qos_params qos_params[B43_QOS_QUEUE_NUM]; |
| 951 |
|
| 952 |
/* Work for adjustment of the transmission power. |
| 953 |
* This is scheduled when we determine that the actual TX output |
| 954 |
* power doesn't match what we want. */ |
| 955 |
struct work_struct txpower_adjust_work; |
| 956 |
|
| 957 |
/* Packet transmit work */ |
| 958 |
struct work_struct tx_work; |
| 959 |
|
| 960 |
/* Queue of packets to be transmitted. */ |
| 961 |
struct sk_buff_head tx_queue[B43_QOS_QUEUE_NUM]; |
| 962 |
|
| 963 |
/* Flag that implement the queues stopping. */ |
| 964 |
bool tx_queue_stopped[B43_QOS_QUEUE_NUM]; |
| 965 |
|
| 966 |
/* firmware loading work */ |
| 967 |
struct work_struct firmware_load; |
| 968 |
|
| 969 |
/* The device LEDs. */ |
| 970 |
struct b43_leds leds; |
| 971 |
|
| 972 |
/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */ |
| 973 |
u8 pio_scratchspace[118] __attribute__((__aligned__(8))); |
| 974 |
u8 pio_tailspace[4] __attribute__((__aligned__(8))); |
| 975 |
}; |
| 976 |
|
| 977 |
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) |
| 978 |
{ |
| 979 |
return hw->priv; |
| 980 |
} |
| 981 |
|
| 982 |
static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev) |
| 983 |
{ |
| 984 |
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); |
| 985 |
return ssb_get_drvdata(ssb_dev); |
| 986 |
} |
| 987 |
|
| 988 |
/* Is the device operating in a specified mode (NL80211_IFTYPE_XXX). */ |
| 989 |
static inline int b43_is_mode(struct b43_wl *wl, int type) |
| 990 |
{ |
| 991 |
return (wl->operating && wl->if_type == type); |
| 992 |
} |
| 993 |
|
| 994 |
/** |
| 995 |
* b43_current_band - Returns the currently used band. |
| 996 |
* Returns one of NL80211_BAND_2GHZ and NL80211_BAND_5GHZ. |
| 997 |
*/ |
| 998 |
static inline enum nl80211_band b43_current_band(struct b43_wl *wl) |
| 999 |
{ |
| 1000 |
return wl->hw->conf.chandef.chan->band; |
| 1001 |
} |
| 1002 |
|
| 1003 |
static inline int b43_bus_may_powerdown(struct b43_wldev *wldev) |
| 1004 |
{ |
| 1005 |
return wldev->dev->bus_may_powerdown(wldev->dev); |
| 1006 |
} |
| 1007 |
static inline int b43_bus_powerup(struct b43_wldev *wldev, bool dynamic_pctl) |
| 1008 |
{ |
| 1009 |
return wldev->dev->bus_powerup(wldev->dev, dynamic_pctl); |
| 1010 |
} |
| 1011 |
static inline int b43_device_is_enabled(struct b43_wldev *wldev) |
| 1012 |
{ |
| 1013 |
return wldev->dev->device_is_enabled(wldev->dev); |
| 1014 |
} |
| 1015 |
static inline void b43_device_enable(struct b43_wldev *wldev, |
| 1016 |
u32 core_specific_flags) |
| 1017 |
{ |
| 1018 |
wldev->dev->device_enable(wldev->dev, core_specific_flags); |
| 1019 |
} |
| 1020 |
static inline void b43_device_disable(struct b43_wldev *wldev, |
| 1021 |
u32 core_specific_flags) |
| 1022 |
{ |
| 1023 |
wldev->dev->device_disable(wldev->dev, core_specific_flags); |
| 1024 |
} |
| 1025 |
|
| 1026 |
static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) |
| 1027 |
{ |
| 1028 |
return dev->dev->read16(dev->dev, offset); |
| 1029 |
} |
| 1030 |
|
| 1031 |
static inline void b43_write16(struct b43_wldev *dev, u16 offset, u16 value) |
| 1032 |
{ |
| 1033 |
dev->dev->write16(dev->dev, offset, value); |
| 1034 |
} |
| 1035 |
|
| 1036 |
/* To optimize this check for flush_writes on BCM47XX_BCMA only. */ |
| 1037 |
static inline void b43_write16f(struct b43_wldev *dev, u16 offset, u16 value) |
| 1038 |
{ |
| 1039 |
b43_write16(dev, offset, value); |
| 1040 |
#if defined(CONFIG_BCM47XX_BCMA) |
| 1041 |
if (dev->dev->flush_writes) |
| 1042 |
b43_read16(dev, offset); |
| 1043 |
#endif |
| 1044 |
} |
| 1045 |
|
| 1046 |
static inline void b43_maskset16(struct b43_wldev *dev, u16 offset, u16 mask, |
| 1047 |
u16 set) |
| 1048 |
{ |
| 1049 |
b43_write16(dev, offset, (b43_read16(dev, offset) & mask) | set); |
| 1050 |
} |
| 1051 |
|
| 1052 |
static inline u32 b43_read32(struct b43_wldev *dev, u16 offset) |
| 1053 |
{ |
| 1054 |
return dev->dev->read32(dev->dev, offset); |
| 1055 |
} |
| 1056 |
|
| 1057 |
static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value) |
| 1058 |
{ |
| 1059 |
dev->dev->write32(dev->dev, offset, value); |
| 1060 |
} |
| 1061 |
|
| 1062 |
static inline void b43_maskset32(struct b43_wldev *dev, u16 offset, u32 mask, |
| 1063 |
u32 set) |
| 1064 |
{ |
| 1065 |
b43_write32(dev, offset, (b43_read32(dev, offset) & mask) | set); |
| 1066 |
} |
| 1067 |
|
| 1068 |
static inline void b43_block_read(struct b43_wldev *dev, void *buffer, |
| 1069 |
size_t count, u16 offset, u8 reg_width) |
| 1070 |
{ |
| 1071 |
dev->dev->block_read(dev->dev, buffer, count, offset, reg_width); |
| 1072 |
} |
| 1073 |
|
| 1074 |
static inline void b43_block_write(struct b43_wldev *dev, const void *buffer, |
| 1075 |
size_t count, u16 offset, u8 reg_width) |
| 1076 |
{ |
| 1077 |
dev->dev->block_write(dev->dev, buffer, count, offset, reg_width); |
| 1078 |
} |
| 1079 |
|
| 1080 |
static inline bool b43_using_pio_transfers(struct b43_wldev *dev) |
| 1081 |
{ |
| 1082 |
return dev->__using_pio_transfers; |
| 1083 |
} |
| 1084 |
|
| 1085 |
static inline void b43_wake_queue(struct b43_wldev *dev, int queue_prio) |
| 1086 |
{ |
| 1087 |
if (dev->qos_enabled) |
| 1088 |
ieee80211_wake_queue(dev->wl->hw, queue_prio); |
| 1089 |
else |
| 1090 |
ieee80211_wake_queue(dev->wl->hw, 0); |
| 1091 |
} |
| 1092 |
|
| 1093 |
static inline void b43_stop_queue(struct b43_wldev *dev, int queue_prio) |
| 1094 |
{ |
| 1095 |
if (dev->qos_enabled) |
| 1096 |
ieee80211_stop_queue(dev->wl->hw, queue_prio); |
| 1097 |
else |
| 1098 |
ieee80211_stop_queue(dev->wl->hw, 0); |
| 1099 |
} |
| 1100 |
|
| 1101 |
/* Message printing */ |
| 1102 |
__printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...); |
| 1103 |
__printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...); |
| 1104 |
__printf(2, 3) void b43warn(struct b43_wl *wl, const char *fmt, ...); |
| 1105 |
__printf(2, 3) void b43dbg(struct b43_wl *wl, const char *fmt, ...); |
| 1106 |
|
| 1107 |
|
| 1108 |
/* A WARN_ON variant that vanishes when b43 debugging is disabled. |
| 1109 |
* This _also_ evaluates the arg with debugging disabled. */ |
| 1110 |
#if B43_DEBUG |
| 1111 |
# define B43_WARN_ON(x) WARN_ON(x) |
| 1112 |
#else |
| 1113 |
static inline bool __b43_warn_on_dummy(bool x) { return x; } |
| 1114 |
# define B43_WARN_ON(x) __b43_warn_on_dummy(unlikely(!!(x))) |
| 1115 |
#endif |
| 1116 |
|
| 1117 |
/* Convert an integer to a Q5.2 value */ |
| 1118 |
#define INT_TO_Q52(i) ((i) << 2) |
| 1119 |
/* Convert a Q5.2 value to an integer (precision loss!) */ |
| 1120 |
#define Q52_TO_INT(q52) ((q52) >> 2) |
| 1121 |
/* Macros for printing a value in Q5.2 format */ |
| 1122 |
#define Q52_FMT "%u.%u" |
| 1123 |
#define Q52_ARG(q52) Q52_TO_INT(q52), ((((q52) & 0x3) * 100) / 4) |
| 1124 |
|
| 1125 |
#endif /* B43_H_ */ |