| 1 |
/* |
| 2 |
* Copyright (c) 2004-2008 Reyk Floeter <[email protected]> |
| 3 |
* Copyright (c) 2006-2008 Nick Kossifidis <[email protected]> |
| 4 |
* Copyright (c) 2007-2008 Luis Rodriguez <[email protected]> |
| 5 |
* Copyright (c) 2007-2008 Pavel Roskin <[email protected]> |
| 6 |
* Copyright (c) 2007-2008 Jiri Slaby <[email protected]> |
| 7 |
* |
| 8 |
* Permission to use, copy, modify, and distribute this software for any |
| 9 |
* purpose with or without fee is hereby granted, provided that the above |
| 10 |
* copyright notice and this permission notice appear in all copies. |
| 11 |
* |
| 12 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 13 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 14 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 15 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 16 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 17 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 18 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 19 |
* |
| 20 |
*/ |
| 21 |
|
| 22 |
/****************************\ |
| 23 |
Reset function and helpers |
| 24 |
\****************************/ |
| 25 |
|
| 26 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 27 |
|
| 28 |
#include <linux/unaligned.h> |
| 29 |
|
| 30 |
#include <linux/pci.h> /* To determine if a card is pci-e */ |
| 31 |
#include <linux/log2.h> |
| 32 |
#include <linux/platform_device.h> |
| 33 |
#include "ath5k.h" |
| 34 |
#include "reg.h" |
| 35 |
#include "debug.h" |
| 36 |
|
| 37 |
|
| 38 |
/** |
| 39 |
* DOC: Reset function and helpers |
| 40 |
* |
| 41 |
* Here we implement the main reset routine, used to bring the card |
| 42 |
* to a working state and ready to receive. We also handle routines |
| 43 |
* that don't fit on other places such as clock, sleep and power control |
| 44 |
*/ |
| 45 |
|
| 46 |
|
| 47 |
/******************\ |
| 48 |
* Helper functions * |
| 49 |
\******************/ |
| 50 |
|
| 51 |
/** |
| 52 |
* ath5k_hw_register_timeout() - Poll a register for a flag/field change |
| 53 |
* @ah: The &struct ath5k_hw |
| 54 |
* @reg: The register to read |
| 55 |
* @flag: The flag/field to check on the register |
| 56 |
* @val: The field value we expect (if we check a field) |
| 57 |
* @is_set: Instead of checking if the flag got cleared, check if it got set |
| 58 |
* |
| 59 |
* Some registers contain flags that indicate that an operation is |
| 60 |
* running. We use this function to poll these registers and check |
| 61 |
* if these flags get cleared. We also use it to poll a register |
| 62 |
* field (containing multiple flags) until it gets a specific value. |
| 63 |
* |
| 64 |
* Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 |
| 65 |
*/ |
| 66 |
int |
| 67 |
ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, |
| 68 |
bool is_set) |
| 69 |
{ |
| 70 |
int i; |
| 71 |
u32 data; |
| 72 |
|
| 73 |
for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { |
| 74 |
data = ath5k_hw_reg_read(ah, reg); |
| 75 |
if (is_set && (data & flag)) |
| 76 |
break; |
| 77 |
else if ((data & flag) == val) |
| 78 |
break; |
| 79 |
udelay(15); |
| 80 |
} |
| 81 |
|
| 82 |
return (i <= 0) ? -EAGAIN : 0; |
| 83 |
} |
| 84 |
|
| 85 |
|
| 86 |
/*************************\ |
| 87 |
* Clock related functions * |
| 88 |
\*************************/ |
| 89 |
|
| 90 |
/** |
| 91 |
* ath5k_hw_htoclock() - Translate usec to hw clock units |
| 92 |
* @ah: The &struct ath5k_hw |
| 93 |
* @usec: value in microseconds |
| 94 |
* |
| 95 |
* Translate usecs to hw clock units based on the current |
| 96 |
* hw clock rate. |
| 97 |
* |
| 98 |
* Returns number of clock units |
| 99 |
*/ |
| 100 |
unsigned int |
| 101 |
ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) |
| 102 |
{ |
| 103 |
struct ath_common *common = ath5k_hw_common(ah); |
| 104 |
return usec * common->clockrate; |
| 105 |
} |
| 106 |
|
| 107 |
/** |
| 108 |
* ath5k_hw_clocktoh() - Translate hw clock units to usec |
| 109 |
* @ah: The &struct ath5k_hw |
| 110 |
* @clock: value in hw clock units |
| 111 |
* |
| 112 |
* Translate hw clock units to usecs based on the current |
| 113 |
* hw clock rate. |
| 114 |
* |
| 115 |
* Returns number of usecs |
| 116 |
*/ |
| 117 |
unsigned int |
| 118 |
ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) |
| 119 |
{ |
| 120 |
struct ath_common *common = ath5k_hw_common(ah); |
| 121 |
return clock / common->clockrate; |
| 122 |
} |
| 123 |
|
| 124 |
/** |
| 125 |
* ath5k_hw_init_core_clock() - Initialize core clock |
| 126 |
* @ah: The &struct ath5k_hw |
| 127 |
* |
| 128 |
* Initialize core clock parameters (usec, usec32, latencies etc), |
| 129 |
* based on current bwmode and chipset properties. |
| 130 |
*/ |
| 131 |
static void |
| 132 |
ath5k_hw_init_core_clock(struct ath5k_hw *ah) |
| 133 |
{ |
| 134 |
struct ieee80211_channel *channel = ah->ah_current_channel; |
| 135 |
struct ath_common *common = ath5k_hw_common(ah); |
| 136 |
u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs; |
| 137 |
|
| 138 |
/* |
| 139 |
* Set core clock frequency |
| 140 |
*/ |
| 141 |
switch (channel->hw_value) { |
| 142 |
case AR5K_MODE_11A: |
| 143 |
clock = 40; |
| 144 |
break; |
| 145 |
case AR5K_MODE_11B: |
| 146 |
clock = 22; |
| 147 |
break; |
| 148 |
case AR5K_MODE_11G: |
| 149 |
default: |
| 150 |
clock = 44; |
| 151 |
break; |
| 152 |
} |
| 153 |
|
| 154 |
/* Use clock multiplier for non-default |
| 155 |
* bwmode */ |
| 156 |
switch (ah->ah_bwmode) { |
| 157 |
case AR5K_BWMODE_40MHZ: |
| 158 |
clock *= 2; |
| 159 |
break; |
| 160 |
case AR5K_BWMODE_10MHZ: |
| 161 |
clock /= 2; |
| 162 |
break; |
| 163 |
case AR5K_BWMODE_5MHZ: |
| 164 |
clock /= 4; |
| 165 |
break; |
| 166 |
default: |
| 167 |
break; |
| 168 |
} |
| 169 |
|
| 170 |
common->clockrate = clock; |
| 171 |
|
| 172 |
/* |
| 173 |
* Set USEC parameters |
| 174 |
*/ |
| 175 |
/* Set USEC counter on PCU*/ |
| 176 |
usec = clock - 1; |
| 177 |
usec = AR5K_REG_SM(usec, AR5K_USEC_1); |
| 178 |
|
| 179 |
/* Set usec duration on DCU */ |
| 180 |
if (ah->ah_version != AR5K_AR5210) |
| 181 |
AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, |
| 182 |
AR5K_DCU_GBL_IFS_MISC_USEC_DUR, |
| 183 |
clock); |
| 184 |
|
| 185 |
/* Set 32MHz USEC counter */ |
| 186 |
if ((ah->ah_radio == AR5K_RF5112) || |
| 187 |
(ah->ah_radio == AR5K_RF2413) || |
| 188 |
(ah->ah_radio == AR5K_RF5413) || |
| 189 |
(ah->ah_radio == AR5K_RF2316) || |
| 190 |
(ah->ah_radio == AR5K_RF2317)) |
| 191 |
/* Remain on 40MHz clock ? */ |
| 192 |
sclock = 40 - 1; |
| 193 |
else |
| 194 |
sclock = 32 - 1; |
| 195 |
sclock = AR5K_REG_SM(sclock, AR5K_USEC_32); |
| 196 |
|
| 197 |
/* |
| 198 |
* Set tx/rx latencies |
| 199 |
*/ |
| 200 |
usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); |
| 201 |
txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211); |
| 202 |
rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211); |
| 203 |
|
| 204 |
/* |
| 205 |
* Set default Tx frame to Tx data start delay |
| 206 |
*/ |
| 207 |
txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; |
| 208 |
|
| 209 |
/* |
| 210 |
* 5210 initvals don't include usec settings |
| 211 |
* so we need to use magic values here for |
| 212 |
* tx/rx latencies |
| 213 |
*/ |
| 214 |
if (ah->ah_version == AR5K_AR5210) { |
| 215 |
/* same for turbo */ |
| 216 |
txlat = AR5K_INIT_TX_LATENCY_5210; |
| 217 |
rxlat = AR5K_INIT_RX_LATENCY_5210; |
| 218 |
} |
| 219 |
|
| 220 |
if (ah->ah_mac_srev < AR5K_SREV_AR5211) { |
| 221 |
/* 5311 has different tx/rx latency masks |
| 222 |
* from 5211, since we deal 5311 the same |
| 223 |
* as 5211 when setting initvals, shift |
| 224 |
* values here to their proper locations |
| 225 |
* |
| 226 |
* Note: Initvals indicate tx/rx/ latencies |
| 227 |
* are the same for turbo mode */ |
| 228 |
txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210); |
| 229 |
rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210); |
| 230 |
} else |
| 231 |
switch (ah->ah_bwmode) { |
| 232 |
case AR5K_BWMODE_10MHZ: |
| 233 |
txlat = AR5K_REG_SM(txlat * 2, |
| 234 |
AR5K_USEC_TX_LATENCY_5211); |
| 235 |
rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, |
| 236 |
AR5K_USEC_RX_LATENCY_5211); |
| 237 |
txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ; |
| 238 |
break; |
| 239 |
case AR5K_BWMODE_5MHZ: |
| 240 |
txlat = AR5K_REG_SM(txlat * 4, |
| 241 |
AR5K_USEC_TX_LATENCY_5211); |
| 242 |
rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, |
| 243 |
AR5K_USEC_RX_LATENCY_5211); |
| 244 |
txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ; |
| 245 |
break; |
| 246 |
case AR5K_BWMODE_40MHZ: |
| 247 |
txlat = AR5K_INIT_TX_LAT_MIN; |
| 248 |
rxlat = AR5K_REG_SM(rxlat / 2, |
| 249 |
AR5K_USEC_RX_LATENCY_5211); |
| 250 |
txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; |
| 251 |
break; |
| 252 |
default: |
| 253 |
break; |
| 254 |
} |
| 255 |
|
| 256 |
usec_reg = (usec | sclock | txlat | rxlat); |
| 257 |
ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); |
| 258 |
|
| 259 |
/* On 5112 set tx frame to tx data start delay */ |
| 260 |
if (ah->ah_radio == AR5K_RF5112) { |
| 261 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, |
| 262 |
AR5K_PHY_RF_CTL2_TXF2TXD_START, |
| 263 |
txf2txs); |
| 264 |
} |
| 265 |
} |
| 266 |
|
| 267 |
/** |
| 268 |
* ath5k_hw_set_sleep_clock() - Setup sleep clock operation |
| 269 |
* @ah: The &struct ath5k_hw |
| 270 |
* @enable: Enable sleep clock operation (false to disable) |
| 271 |
* |
| 272 |
* If there is an external 32KHz crystal available, use it |
| 273 |
* as ref. clock instead of 32/40MHz clock and baseband clocks |
| 274 |
* to save power during sleep or restore normal 32/40MHz |
| 275 |
* operation. |
| 276 |
* |
| 277 |
* NOTE: When operating on 32KHz certain PHY registers (27 - 31, |
| 278 |
* 123 - 127) require delay on access. |
| 279 |
*/ |
| 280 |
static void |
| 281 |
ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) |
| 282 |
{ |
| 283 |
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| 284 |
u32 scal, spending, sclock; |
| 285 |
|
| 286 |
/* Only set 32KHz settings if we have an external |
| 287 |
* 32KHz crystal present */ |
| 288 |
if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || |
| 289 |
AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && |
| 290 |
enable) { |
| 291 |
|
| 292 |
/* 1 usec/cycle */ |
| 293 |
AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); |
| 294 |
/* Set up tsf increment on each cycle */ |
| 295 |
AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); |
| 296 |
|
| 297 |
/* Set baseband sleep control registers |
| 298 |
* and sleep control rate */ |
| 299 |
ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); |
| 300 |
|
| 301 |
if ((ah->ah_radio == AR5K_RF5112) || |
| 302 |
(ah->ah_radio == AR5K_RF5413) || |
| 303 |
(ah->ah_radio == AR5K_RF2316) || |
| 304 |
(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) |
| 305 |
spending = 0x14; |
| 306 |
else |
| 307 |
spending = 0x18; |
| 308 |
ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); |
| 309 |
|
| 310 |
if ((ah->ah_radio == AR5K_RF5112) || |
| 311 |
(ah->ah_radio == AR5K_RF5413) || |
| 312 |
(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { |
| 313 |
ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); |
| 314 |
ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); |
| 315 |
ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); |
| 316 |
ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); |
| 317 |
AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, |
| 318 |
AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); |
| 319 |
} else { |
| 320 |
ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); |
| 321 |
ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); |
| 322 |
ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); |
| 323 |
ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); |
| 324 |
AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, |
| 325 |
AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); |
| 326 |
} |
| 327 |
|
| 328 |
/* Enable sleep clock operation */ |
| 329 |
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, |
| 330 |
AR5K_PCICFG_SLEEP_CLOCK_EN); |
| 331 |
|
| 332 |
} else { |
| 333 |
|
| 334 |
/* Disable sleep clock operation and |
| 335 |
* restore default parameters */ |
| 336 |
AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, |
| 337 |
AR5K_PCICFG_SLEEP_CLOCK_EN); |
| 338 |
|
| 339 |
AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, |
| 340 |
AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); |
| 341 |
|
| 342 |
/* Set DAC/ADC delays */ |
| 343 |
ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); |
| 344 |
ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); |
| 345 |
|
| 346 |
if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) |
| 347 |
scal = AR5K_PHY_SCAL_32MHZ_2417; |
| 348 |
else if (ee->ee_is_hb63) |
| 349 |
scal = AR5K_PHY_SCAL_32MHZ_HB63; |
| 350 |
else |
| 351 |
scal = AR5K_PHY_SCAL_32MHZ; |
| 352 |
ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); |
| 353 |
|
| 354 |
ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); |
| 355 |
ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); |
| 356 |
|
| 357 |
if ((ah->ah_radio == AR5K_RF5112) || |
| 358 |
(ah->ah_radio == AR5K_RF5413) || |
| 359 |
(ah->ah_radio == AR5K_RF2316) || |
| 360 |
(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) |
| 361 |
spending = 0x14; |
| 362 |
else |
| 363 |
spending = 0x18; |
| 364 |
ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); |
| 365 |
|
| 366 |
/* Set up tsf increment on each cycle */ |
| 367 |
AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); |
| 368 |
|
| 369 |
if ((ah->ah_radio == AR5K_RF5112) || |
| 370 |
(ah->ah_radio == AR5K_RF5413) || |
| 371 |
(ah->ah_radio == AR5K_RF2316) || |
| 372 |
(ah->ah_radio == AR5K_RF2317)) |
| 373 |
sclock = 40 - 1; |
| 374 |
else |
| 375 |
sclock = 32 - 1; |
| 376 |
AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock); |
| 377 |
} |
| 378 |
} |
| 379 |
|
| 380 |
|
| 381 |
/*********************\ |
| 382 |
* Reset/Sleep control * |
| 383 |
\*********************/ |
| 384 |
|
| 385 |
/** |
| 386 |
* ath5k_hw_nic_reset() - Reset the various chipset units |
| 387 |
* @ah: The &struct ath5k_hw |
| 388 |
* @val: Mask to indicate what units to reset |
| 389 |
* |
| 390 |
* To reset the various chipset units we need to write |
| 391 |
* the mask to AR5K_RESET_CTL and poll the register until |
| 392 |
* all flags are cleared. |
| 393 |
* |
| 394 |
* Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) |
| 395 |
*/ |
| 396 |
static int |
| 397 |
ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) |
| 398 |
{ |
| 399 |
int ret; |
| 400 |
u32 mask = val ? val : ~0U; |
| 401 |
|
| 402 |
/* Read-and-clear RX Descriptor Pointer*/ |
| 403 |
ath5k_hw_reg_read(ah, AR5K_RXDP); |
| 404 |
|
| 405 |
/* |
| 406 |
* Reset the device and wait until success |
| 407 |
*/ |
| 408 |
ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); |
| 409 |
|
| 410 |
/* Wait at least 128 PCI clocks */ |
| 411 |
usleep_range(15, 20); |
| 412 |
|
| 413 |
if (ah->ah_version == AR5K_AR5210) { |
| 414 |
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA |
| 415 |
| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; |
| 416 |
mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA |
| 417 |
| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; |
| 418 |
} else { |
| 419 |
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; |
| 420 |
mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; |
| 421 |
} |
| 422 |
|
| 423 |
ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); |
| 424 |
|
| 425 |
/* |
| 426 |
* Reset configuration register (for hw byte-swap). Note that this |
| 427 |
* is only set for big endian. We do the necessary magic in |
| 428 |
* AR5K_INIT_CFG. |
| 429 |
*/ |
| 430 |
if ((val & AR5K_RESET_CTL_PCU) == 0) |
| 431 |
ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); |
| 432 |
|
| 433 |
return ret; |
| 434 |
} |
| 435 |
|
| 436 |
/** |
| 437 |
* ath5k_hw_wisoc_reset() - Reset AHB chipset |
| 438 |
* @ah: The &struct ath5k_hw |
| 439 |
* @flags: Mask to indicate what units to reset |
| 440 |
* |
| 441 |
* Same as ath5k_hw_nic_reset but for AHB based devices |
| 442 |
* |
| 443 |
* Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) |
| 444 |
*/ |
| 445 |
static int |
| 446 |
ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) |
| 447 |
{ |
| 448 |
u32 mask = flags ? flags : ~0U; |
| 449 |
u32 __iomem *reg; |
| 450 |
u32 regval; |
| 451 |
u32 val = 0; |
| 452 |
|
| 453 |
/* ah->ah_mac_srev is not available at this point yet */ |
| 454 |
if (ah->devid >= AR5K_SREV_AR2315_R6) { |
| 455 |
reg = (u32 __iomem *) AR5K_AR2315_RESET; |
| 456 |
if (mask & AR5K_RESET_CTL_PCU) |
| 457 |
val |= AR5K_AR2315_RESET_WMAC; |
| 458 |
if (mask & AR5K_RESET_CTL_BASEBAND) |
| 459 |
val |= AR5K_AR2315_RESET_BB_WARM; |
| 460 |
} else { |
| 461 |
reg = (u32 __iomem *) AR5K_AR5312_RESET; |
| 462 |
if (to_platform_device(ah->dev)->id == 0) { |
| 463 |
if (mask & AR5K_RESET_CTL_PCU) |
| 464 |
val |= AR5K_AR5312_RESET_WMAC0; |
| 465 |
if (mask & AR5K_RESET_CTL_BASEBAND) |
| 466 |
val |= AR5K_AR5312_RESET_BB0_COLD | |
| 467 |
AR5K_AR5312_RESET_BB0_WARM; |
| 468 |
} else { |
| 469 |
if (mask & AR5K_RESET_CTL_PCU) |
| 470 |
val |= AR5K_AR5312_RESET_WMAC1; |
| 471 |
if (mask & AR5K_RESET_CTL_BASEBAND) |
| 472 |
val |= AR5K_AR5312_RESET_BB1_COLD | |
| 473 |
AR5K_AR5312_RESET_BB1_WARM; |
| 474 |
} |
| 475 |
} |
| 476 |
|
| 477 |
/* Put BB/MAC into reset */ |
| 478 |
regval = ioread32(reg); |
| 479 |
iowrite32(regval | val, reg); |
| 480 |
regval = ioread32(reg); |
| 481 |
udelay(100); /* NB: should be atomic */ |
| 482 |
|
| 483 |
/* Bring BB/MAC out of reset */ |
| 484 |
iowrite32(regval & ~val, reg); |
| 485 |
regval = ioread32(reg); |
| 486 |
|
| 487 |
/* |
| 488 |
* Reset configuration register (for hw byte-swap). Note that this |
| 489 |
* is only set for big endian. We do the necessary magic in |
| 490 |
* AR5K_INIT_CFG. |
| 491 |
*/ |
| 492 |
if ((flags & AR5K_RESET_CTL_PCU) == 0) |
| 493 |
ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); |
| 494 |
|
| 495 |
return 0; |
| 496 |
} |
| 497 |
|
| 498 |
/** |
| 499 |
* ath5k_hw_set_power_mode() - Set power mode |
| 500 |
* @ah: The &struct ath5k_hw |
| 501 |
* @mode: One of enum ath5k_power_mode |
| 502 |
* @set_chip: Set to true to write sleep control register |
| 503 |
* @sleep_duration: How much time the device is allowed to sleep |
| 504 |
* when sleep logic is enabled (in 128 microsecond increments). |
| 505 |
* |
| 506 |
* This function is used to configure sleep policy and allowed |
| 507 |
* sleep modes. For more information check out the sleep control |
| 508 |
* register on reg.h and STA_ID1. |
| 509 |
* |
| 510 |
* Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid |
| 511 |
* mode is requested. |
| 512 |
*/ |
| 513 |
static int |
| 514 |
ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, |
| 515 |
bool set_chip, u16 sleep_duration) |
| 516 |
{ |
| 517 |
unsigned int i; |
| 518 |
u32 staid, data; |
| 519 |
|
| 520 |
staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); |
| 521 |
|
| 522 |
switch (mode) { |
| 523 |
case AR5K_PM_AUTO: |
| 524 |
staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; |
| 525 |
fallthrough; |
| 526 |
case AR5K_PM_NETWORK_SLEEP: |
| 527 |
if (set_chip) |
| 528 |
ath5k_hw_reg_write(ah, |
| 529 |
AR5K_SLEEP_CTL_SLE_ALLOW | |
| 530 |
sleep_duration, |
| 531 |
AR5K_SLEEP_CTL); |
| 532 |
|
| 533 |
staid |= AR5K_STA_ID1_PWR_SV; |
| 534 |
break; |
| 535 |
|
| 536 |
case AR5K_PM_FULL_SLEEP: |
| 537 |
if (set_chip) |
| 538 |
ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, |
| 539 |
AR5K_SLEEP_CTL); |
| 540 |
|
| 541 |
staid |= AR5K_STA_ID1_PWR_SV; |
| 542 |
break; |
| 543 |
|
| 544 |
case AR5K_PM_AWAKE: |
| 545 |
|
| 546 |
staid &= ~AR5K_STA_ID1_PWR_SV; |
| 547 |
|
| 548 |
if (!set_chip) |
| 549 |
goto commit; |
| 550 |
|
| 551 |
data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); |
| 552 |
|
| 553 |
/* If card is down we 'll get 0xffff... so we |
| 554 |
* need to clean this up before we write the register |
| 555 |
*/ |
| 556 |
if (data & 0xffc00000) |
| 557 |
data = 0; |
| 558 |
else |
| 559 |
/* Preserve sleep duration etc */ |
| 560 |
data = data & ~AR5K_SLEEP_CTL_SLE; |
| 561 |
|
| 562 |
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, |
| 563 |
AR5K_SLEEP_CTL); |
| 564 |
usleep_range(15, 20); |
| 565 |
|
| 566 |
for (i = 200; i > 0; i--) { |
| 567 |
/* Check if the chip did wake up */ |
| 568 |
if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & |
| 569 |
AR5K_PCICFG_SPWR_DN) == 0) |
| 570 |
break; |
| 571 |
|
| 572 |
/* Wait a bit and retry */ |
| 573 |
usleep_range(50, 75); |
| 574 |
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, |
| 575 |
AR5K_SLEEP_CTL); |
| 576 |
} |
| 577 |
|
| 578 |
/* Fail if the chip didn't wake up */ |
| 579 |
if (i == 0) |
| 580 |
return -EIO; |
| 581 |
|
| 582 |
break; |
| 583 |
|
| 584 |
default: |
| 585 |
return -EINVAL; |
| 586 |
} |
| 587 |
|
| 588 |
commit: |
| 589 |
ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); |
| 590 |
|
| 591 |
return 0; |
| 592 |
} |
| 593 |
|
| 594 |
/** |
| 595 |
* ath5k_hw_on_hold() - Put device on hold |
| 596 |
* @ah: The &struct ath5k_hw |
| 597 |
* |
| 598 |
* Put MAC and Baseband on warm reset and keep that state |
| 599 |
* (don't clean sleep control register). After this MAC |
| 600 |
* and Baseband are disabled and a full reset is needed |
| 601 |
* to come back. This way we save as much power as possible |
| 602 |
* without putting the card on full sleep. |
| 603 |
* |
| 604 |
* Returns 0 on success or -EIO on error |
| 605 |
*/ |
| 606 |
int |
| 607 |
ath5k_hw_on_hold(struct ath5k_hw *ah) |
| 608 |
{ |
| 609 |
struct pci_dev *pdev = ah->pdev; |
| 610 |
u32 bus_flags; |
| 611 |
int ret; |
| 612 |
|
| 613 |
if (ath5k_get_bus_type(ah) == ATH_AHB) |
| 614 |
return 0; |
| 615 |
|
| 616 |
/* Make sure device is awake */ |
| 617 |
ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); |
| 618 |
if (ret) { |
| 619 |
ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); |
| 620 |
return ret; |
| 621 |
} |
| 622 |
|
| 623 |
/* |
| 624 |
* Put chipset on warm reset... |
| 625 |
* |
| 626 |
* Note: putting PCI core on warm reset on PCI-E cards |
| 627 |
* results card to hang and always return 0xffff... so |
| 628 |
* we ignore that flag for PCI-E cards. On PCI cards |
| 629 |
* this flag gets cleared after 64 PCI clocks. |
| 630 |
*/ |
| 631 |
bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; |
| 632 |
|
| 633 |
if (ah->ah_version == AR5K_AR5210) { |
| 634 |
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | |
| 635 |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | |
| 636 |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); |
| 637 |
usleep_range(2000, 2500); |
| 638 |
} else { |
| 639 |
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | |
| 640 |
AR5K_RESET_CTL_BASEBAND | bus_flags); |
| 641 |
} |
| 642 |
|
| 643 |
if (ret) { |
| 644 |
ATH5K_ERR(ah, "failed to put device on warm reset\n"); |
| 645 |
return -EIO; |
| 646 |
} |
| 647 |
|
| 648 |
/* ...wakeup again!*/ |
| 649 |
ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); |
| 650 |
if (ret) { |
| 651 |
ATH5K_ERR(ah, "failed to put device on hold\n"); |
| 652 |
return ret; |
| 653 |
} |
| 654 |
|
| 655 |
return ret; |
| 656 |
} |
| 657 |
|
| 658 |
/** |
| 659 |
* ath5k_hw_nic_wakeup() - Force card out of sleep |
| 660 |
* @ah: The &struct ath5k_hw |
| 661 |
* @channel: The &struct ieee80211_channel |
| 662 |
* |
| 663 |
* Bring up MAC + PHY Chips and program PLL |
| 664 |
* NOTE: Channel is NULL for the initial wakeup. |
| 665 |
* |
| 666 |
* Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos |
| 667 |
*/ |
| 668 |
int |
| 669 |
ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) |
| 670 |
{ |
| 671 |
struct pci_dev *pdev = ah->pdev; |
| 672 |
u32 turbo, mode, clock, bus_flags; |
| 673 |
int ret; |
| 674 |
|
| 675 |
turbo = 0; |
| 676 |
mode = 0; |
| 677 |
clock = 0; |
| 678 |
|
| 679 |
if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { |
| 680 |
/* Wakeup the device */ |
| 681 |
ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); |
| 682 |
if (ret) { |
| 683 |
ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); |
| 684 |
return ret; |
| 685 |
} |
| 686 |
} |
| 687 |
|
| 688 |
/* |
| 689 |
* Put chipset on warm reset... |
| 690 |
* |
| 691 |
* Note: putting PCI core on warm reset on PCI-E cards |
| 692 |
* results card to hang and always return 0xffff... so |
| 693 |
* we ignore that flag for PCI-E cards. On PCI cards |
| 694 |
* this flag gets cleared after 64 PCI clocks. |
| 695 |
*/ |
| 696 |
bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; |
| 697 |
|
| 698 |
if (ah->ah_version == AR5K_AR5210) { |
| 699 |
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | |
| 700 |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | |
| 701 |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); |
| 702 |
usleep_range(2000, 2500); |
| 703 |
} else { |
| 704 |
if (ath5k_get_bus_type(ah) == ATH_AHB) |
| 705 |
ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | |
| 706 |
AR5K_RESET_CTL_BASEBAND); |
| 707 |
else |
| 708 |
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | |
| 709 |
AR5K_RESET_CTL_BASEBAND | bus_flags); |
| 710 |
} |
| 711 |
|
| 712 |
if (ret) { |
| 713 |
ATH5K_ERR(ah, "failed to reset the MAC Chip\n"); |
| 714 |
return -EIO; |
| 715 |
} |
| 716 |
|
| 717 |
/* ...wakeup again!...*/ |
| 718 |
ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); |
| 719 |
if (ret) { |
| 720 |
ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); |
| 721 |
return ret; |
| 722 |
} |
| 723 |
|
| 724 |
/* ...reset configuration register on Wisoc ... |
| 725 |
* ...clear reset control register and pull device out of |
| 726 |
* warm reset on others */ |
| 727 |
if (ath5k_get_bus_type(ah) == ATH_AHB) |
| 728 |
ret = ath5k_hw_wisoc_reset(ah, 0); |
| 729 |
else |
| 730 |
ret = ath5k_hw_nic_reset(ah, 0); |
| 731 |
|
| 732 |
if (ret) { |
| 733 |
ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n"); |
| 734 |
return -EIO; |
| 735 |
} |
| 736 |
|
| 737 |
/* On initialization skip PLL programming since we don't have |
| 738 |
* a channel / mode set yet */ |
| 739 |
if (!channel) |
| 740 |
return 0; |
| 741 |
|
| 742 |
if (ah->ah_version != AR5K_AR5210) { |
| 743 |
/* |
| 744 |
* Get channel mode flags |
| 745 |
*/ |
| 746 |
|
| 747 |
if (ah->ah_radio >= AR5K_RF5112) { |
| 748 |
mode = AR5K_PHY_MODE_RAD_RF5112; |
| 749 |
clock = AR5K_PHY_PLL_RF5112; |
| 750 |
} else { |
| 751 |
mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ |
| 752 |
clock = AR5K_PHY_PLL_RF5111; /*Zero*/ |
| 753 |
} |
| 754 |
|
| 755 |
if (channel->band == NL80211_BAND_2GHZ) { |
| 756 |
mode |= AR5K_PHY_MODE_FREQ_2GHZ; |
| 757 |
clock |= AR5K_PHY_PLL_44MHZ; |
| 758 |
|
| 759 |
if (channel->hw_value == AR5K_MODE_11B) { |
| 760 |
mode |= AR5K_PHY_MODE_MOD_CCK; |
| 761 |
} else { |
| 762 |
/* XXX Dynamic OFDM/CCK is not supported by the |
| 763 |
* AR5211 so we set MOD_OFDM for plain g (no |
| 764 |
* CCK headers) operation. We need to test |
| 765 |
* this, 5211 might support ofdm-only g after |
| 766 |
* all, there are also initial register values |
| 767 |
* in the code for g mode (see initvals.c). |
| 768 |
*/ |
| 769 |
if (ah->ah_version == AR5K_AR5211) |
| 770 |
mode |= AR5K_PHY_MODE_MOD_OFDM; |
| 771 |
else |
| 772 |
mode |= AR5K_PHY_MODE_MOD_DYN; |
| 773 |
} |
| 774 |
} else if (channel->band == NL80211_BAND_5GHZ) { |
| 775 |
mode |= (AR5K_PHY_MODE_FREQ_5GHZ | |
| 776 |
AR5K_PHY_MODE_MOD_OFDM); |
| 777 |
|
| 778 |
/* Different PLL setting for 5413 */ |
| 779 |
if (ah->ah_radio == AR5K_RF5413) |
| 780 |
clock = AR5K_PHY_PLL_40MHZ_5413; |
| 781 |
else |
| 782 |
clock |= AR5K_PHY_PLL_40MHZ; |
| 783 |
} else { |
| 784 |
ATH5K_ERR(ah, "invalid radio frequency mode\n"); |
| 785 |
return -EINVAL; |
| 786 |
} |
| 787 |
|
| 788 |
/*XXX: Can bwmode be used with dynamic mode ? |
| 789 |
* (I don't think it supports 44MHz) */ |
| 790 |
/* On 2425 initvals TURBO_SHORT is not present */ |
| 791 |
if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { |
| 792 |
turbo = AR5K_PHY_TURBO_MODE; |
| 793 |
if (ah->ah_radio != AR5K_RF2425) |
| 794 |
turbo |= AR5K_PHY_TURBO_SHORT; |
| 795 |
} else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) { |
| 796 |
if (ah->ah_radio == AR5K_RF5413) { |
| 797 |
mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? |
| 798 |
AR5K_PHY_MODE_HALF_RATE : |
| 799 |
AR5K_PHY_MODE_QUARTER_RATE; |
| 800 |
} else if (ah->ah_version == AR5K_AR5212) { |
| 801 |
clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? |
| 802 |
AR5K_PHY_PLL_HALF_RATE : |
| 803 |
AR5K_PHY_PLL_QUARTER_RATE; |
| 804 |
} |
| 805 |
} |
| 806 |
|
| 807 |
} else { /* Reset the device */ |
| 808 |
|
| 809 |
/* ...enable Atheros turbo mode if requested */ |
| 810 |
if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) |
| 811 |
ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, |
| 812 |
AR5K_PHY_TURBO); |
| 813 |
} |
| 814 |
|
| 815 |
if (ah->ah_version != AR5K_AR5210) { |
| 816 |
|
| 817 |
/* ...update PLL if needed */ |
| 818 |
if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { |
| 819 |
ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); |
| 820 |
usleep_range(300, 350); |
| 821 |
} |
| 822 |
|
| 823 |
/* ...set the PHY operating mode */ |
| 824 |
ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); |
| 825 |
ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); |
| 826 |
} |
| 827 |
|
| 828 |
return 0; |
| 829 |
} |
| 830 |
|
| 831 |
|
| 832 |
/**************************************\ |
| 833 |
* Post-initvals register modifications * |
| 834 |
\**************************************/ |
| 835 |
|
| 836 |
/** |
| 837 |
* ath5k_hw_tweak_initval_settings() - Tweak initial settings |
| 838 |
* @ah: The &struct ath5k_hw |
| 839 |
* @channel: The &struct ieee80211_channel |
| 840 |
* |
| 841 |
* Some settings are not handled on initvals, e.g. bwmode |
| 842 |
* settings, some phy settings, workarounds etc that in general |
| 843 |
* don't fit anywhere else or are too small to introduce a separate |
| 844 |
* function for each one. So we have this function to handle |
| 845 |
* them all during reset and complete card's initialization. |
| 846 |
*/ |
| 847 |
static void |
| 848 |
ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, |
| 849 |
struct ieee80211_channel *channel) |
| 850 |
{ |
| 851 |
if (ah->ah_version == AR5K_AR5212 && |
| 852 |
ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { |
| 853 |
|
| 854 |
/* Setup ADC control */ |
| 855 |
ath5k_hw_reg_write(ah, |
| 856 |
(AR5K_REG_SM(2, |
| 857 |
AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) | |
| 858 |
AR5K_REG_SM(2, |
| 859 |
AR5K_PHY_ADC_CTL_INBUFGAIN_ON) | |
| 860 |
AR5K_PHY_ADC_CTL_PWD_DAC_OFF | |
| 861 |
AR5K_PHY_ADC_CTL_PWD_ADC_OFF), |
| 862 |
AR5K_PHY_ADC_CTL); |
| 863 |
|
| 864 |
|
| 865 |
|
| 866 |
/* Disable barker RSSI threshold */ |
| 867 |
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, |
| 868 |
AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR); |
| 869 |
|
| 870 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, |
| 871 |
AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2); |
| 872 |
|
| 873 |
/* Set the mute mask */ |
| 874 |
ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); |
| 875 |
} |
| 876 |
|
| 877 |
/* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */ |
| 878 |
if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B) |
| 879 |
ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH); |
| 880 |
|
| 881 |
/* Enable DCU double buffering */ |
| 882 |
if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B) |
| 883 |
AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, |
| 884 |
AR5K_TXCFG_DCU_DBL_BUF_DIS); |
| 885 |
|
| 886 |
/* Set fast ADC */ |
| 887 |
if ((ah->ah_radio == AR5K_RF5413) || |
| 888 |
(ah->ah_radio == AR5K_RF2317) || |
| 889 |
(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { |
| 890 |
u32 fast_adc = true; |
| 891 |
|
| 892 |
if (channel->center_freq == 2462 || |
| 893 |
channel->center_freq == 2467) |
| 894 |
fast_adc = 0; |
| 895 |
|
| 896 |
/* Only update if needed */ |
| 897 |
if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc) |
| 898 |
ath5k_hw_reg_write(ah, fast_adc, |
| 899 |
AR5K_PHY_FAST_ADC); |
| 900 |
} |
| 901 |
|
| 902 |
/* Fix for first revision of the RF5112 RF chipset */ |
| 903 |
if (ah->ah_radio == AR5K_RF5112 && |
| 904 |
ah->ah_radio_5ghz_revision < |
| 905 |
AR5K_SREV_RAD_5112A) { |
| 906 |
u32 data; |
| 907 |
ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, |
| 908 |
AR5K_PHY_CCKTXCTL); |
| 909 |
if (channel->band == NL80211_BAND_5GHZ) |
| 910 |
data = 0xffb81020; |
| 911 |
else |
| 912 |
data = 0xffb80d20; |
| 913 |
ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); |
| 914 |
} |
| 915 |
|
| 916 |
if (ah->ah_mac_srev < AR5K_SREV_AR5211) { |
| 917 |
/* Clear QCU/DCU clock gating register */ |
| 918 |
ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); |
| 919 |
/* Set DAC/ADC delays */ |
| 920 |
ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, |
| 921 |
AR5K_PHY_SCAL); |
| 922 |
/* Enable PCU FIFO corruption ECO */ |
| 923 |
AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, |
| 924 |
AR5K_DIAG_SW_ECO_ENABLE); |
| 925 |
} |
| 926 |
|
| 927 |
if (ah->ah_bwmode) { |
| 928 |
/* Increase PHY switch and AGC settling time |
| 929 |
* on turbo mode (ath5k_hw_commit_eeprom_settings |
| 930 |
* will override settling time if available) */ |
| 931 |
if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { |
| 932 |
|
| 933 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, |
| 934 |
AR5K_PHY_SETTLING_AGC, |
| 935 |
AR5K_AGC_SETTLING_TURBO); |
| 936 |
|
| 937 |
/* XXX: Initvals indicate we only increase |
| 938 |
* switch time on AR5212, 5211 and 5210 |
| 939 |
* only change agc time (bug?) */ |
| 940 |
if (ah->ah_version == AR5K_AR5212) |
| 941 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, |
| 942 |
AR5K_PHY_SETTLING_SWITCH, |
| 943 |
AR5K_SWITCH_SETTLING_TURBO); |
| 944 |
|
| 945 |
if (ah->ah_version == AR5K_AR5210) { |
| 946 |
/* Set Frame Control Register */ |
| 947 |
ath5k_hw_reg_write(ah, |
| 948 |
(AR5K_PHY_FRAME_CTL_INI | |
| 949 |
AR5K_PHY_TURBO_MODE | |
| 950 |
AR5K_PHY_TURBO_SHORT | 0x2020), |
| 951 |
AR5K_PHY_FRAME_CTL_5210); |
| 952 |
} |
| 953 |
/* On 5413 PHY force window length for half/quarter rate*/ |
| 954 |
} else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) && |
| 955 |
(ah->ah_mac_srev <= AR5K_SREV_AR5414)) { |
| 956 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211, |
| 957 |
AR5K_PHY_FRAME_CTL_WIN_LEN, |
| 958 |
3); |
| 959 |
} |
| 960 |
} else if (ah->ah_version == AR5K_AR5210) { |
| 961 |
/* Set Frame Control Register for normal operation */ |
| 962 |
ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020), |
| 963 |
AR5K_PHY_FRAME_CTL_5210); |
| 964 |
} |
| 965 |
} |
| 966 |
|
| 967 |
/** |
| 968 |
* ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM |
| 969 |
* @ah: The &struct ath5k_hw |
| 970 |
* @channel: The &struct ieee80211_channel |
| 971 |
* |
| 972 |
* Use settings stored on EEPROM to properly initialize the card |
| 973 |
* based on various infos and per-mode calibration data. |
| 974 |
*/ |
| 975 |
static void |
| 976 |
ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, |
| 977 |
struct ieee80211_channel *channel) |
| 978 |
{ |
| 979 |
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| 980 |
s16 cck_ofdm_pwr_delta; |
| 981 |
u8 ee_mode; |
| 982 |
|
| 983 |
/* TODO: Add support for AR5210 EEPROM */ |
| 984 |
if (ah->ah_version == AR5K_AR5210) |
| 985 |
return; |
| 986 |
|
| 987 |
ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); |
| 988 |
|
| 989 |
/* Adjust power delta for channel 14 */ |
| 990 |
if (channel->center_freq == 2484) |
| 991 |
cck_ofdm_pwr_delta = |
| 992 |
((ee->ee_cck_ofdm_power_delta - |
| 993 |
ee->ee_scaled_cck_delta) * 2) / 10; |
| 994 |
else |
| 995 |
cck_ofdm_pwr_delta = |
| 996 |
(ee->ee_cck_ofdm_power_delta * 2) / 10; |
| 997 |
|
| 998 |
/* Set CCK to OFDM power delta on tx power |
| 999 |
* adjustment register */ |
| 1000 |
if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { |
| 1001 |
if (channel->hw_value == AR5K_MODE_11G) |
| 1002 |
ath5k_hw_reg_write(ah, |
| 1003 |
AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), |
| 1004 |
AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | |
| 1005 |
AR5K_REG_SM((cck_ofdm_pwr_delta * -1), |
| 1006 |
AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX), |
| 1007 |
AR5K_PHY_TX_PWR_ADJ); |
| 1008 |
else |
| 1009 |
ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ); |
| 1010 |
} else { |
| 1011 |
/* For older revs we scale power on sw during tx power |
| 1012 |
* setup */ |
| 1013 |
ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta; |
| 1014 |
ah->ah_txpower.txp_cck_ofdm_gainf_delta = |
| 1015 |
ee->ee_cck_ofdm_gain_delta; |
| 1016 |
} |
| 1017 |
|
| 1018 |
/* XXX: necessary here? is called from ath5k_hw_set_antenna_mode() |
| 1019 |
* too */ |
| 1020 |
ath5k_hw_set_antenna_switch(ah, ee_mode); |
| 1021 |
|
| 1022 |
/* Noise floor threshold */ |
| 1023 |
ath5k_hw_reg_write(ah, |
| 1024 |
AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), |
| 1025 |
AR5K_PHY_NFTHRES); |
| 1026 |
|
| 1027 |
if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && |
| 1028 |
(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) { |
| 1029 |
/* Switch settling time (Turbo) */ |
| 1030 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, |
| 1031 |
AR5K_PHY_SETTLING_SWITCH, |
| 1032 |
ee->ee_switch_settling_turbo[ee_mode]); |
| 1033 |
|
| 1034 |
/* Tx/Rx attenuation (Turbo) */ |
| 1035 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, |
| 1036 |
AR5K_PHY_GAIN_TXRX_ATTEN, |
| 1037 |
ee->ee_atn_tx_rx_turbo[ee_mode]); |
| 1038 |
|
| 1039 |
/* ADC/PGA desired size (Turbo) */ |
| 1040 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, |
| 1041 |
AR5K_PHY_DESIRED_SIZE_ADC, |
| 1042 |
ee->ee_adc_desired_size_turbo[ee_mode]); |
| 1043 |
|
| 1044 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, |
| 1045 |
AR5K_PHY_DESIRED_SIZE_PGA, |
| 1046 |
ee->ee_pga_desired_size_turbo[ee_mode]); |
| 1047 |
|
| 1048 |
/* Tx/Rx margin (Turbo) */ |
| 1049 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, |
| 1050 |
AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, |
| 1051 |
ee->ee_margin_tx_rx_turbo[ee_mode]); |
| 1052 |
|
| 1053 |
} else { |
| 1054 |
/* Switch settling time */ |
| 1055 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, |
| 1056 |
AR5K_PHY_SETTLING_SWITCH, |
| 1057 |
ee->ee_switch_settling[ee_mode]); |
| 1058 |
|
| 1059 |
/* Tx/Rx attenuation */ |
| 1060 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, |
| 1061 |
AR5K_PHY_GAIN_TXRX_ATTEN, |
| 1062 |
ee->ee_atn_tx_rx[ee_mode]); |
| 1063 |
|
| 1064 |
/* ADC/PGA desired size */ |
| 1065 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, |
| 1066 |
AR5K_PHY_DESIRED_SIZE_ADC, |
| 1067 |
ee->ee_adc_desired_size[ee_mode]); |
| 1068 |
|
| 1069 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, |
| 1070 |
AR5K_PHY_DESIRED_SIZE_PGA, |
| 1071 |
ee->ee_pga_desired_size[ee_mode]); |
| 1072 |
|
| 1073 |
/* Tx/Rx margin */ |
| 1074 |
if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) |
| 1075 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, |
| 1076 |
AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, |
| 1077 |
ee->ee_margin_tx_rx[ee_mode]); |
| 1078 |
} |
| 1079 |
|
| 1080 |
/* XPA delays */ |
| 1081 |
ath5k_hw_reg_write(ah, |
| 1082 |
(ee->ee_tx_end2xpa_disable[ee_mode] << 24) | |
| 1083 |
(ee->ee_tx_end2xpa_disable[ee_mode] << 16) | |
| 1084 |
(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | |
| 1085 |
(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); |
| 1086 |
|
| 1087 |
/* XLNA delay */ |
| 1088 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3, |
| 1089 |
AR5K_PHY_RF_CTL3_TXE2XLNA_ON, |
| 1090 |
ee->ee_tx_end2xlna_enable[ee_mode]); |
| 1091 |
|
| 1092 |
/* Thresh64 (ANI) */ |
| 1093 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF, |
| 1094 |
AR5K_PHY_NF_THRESH62, |
| 1095 |
ee->ee_thr_62[ee_mode]); |
| 1096 |
|
| 1097 |
/* False detect backoff for channels |
| 1098 |
* that have spur noise. Write the new |
| 1099 |
* cyclic power RSSI threshold. */ |
| 1100 |
if (ath5k_hw_chan_has_spur_noise(ah, channel)) |
| 1101 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, |
| 1102 |
AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, |
| 1103 |
AR5K_INIT_CYCRSSI_THR1 + |
| 1104 |
ee->ee_false_detect[ee_mode]); |
| 1105 |
else |
| 1106 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, |
| 1107 |
AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, |
| 1108 |
AR5K_INIT_CYCRSSI_THR1); |
| 1109 |
|
| 1110 |
/* I/Q correction (set enable bit last to match HAL sources) */ |
| 1111 |
/* TODO: Per channel i/q infos ? */ |
| 1112 |
if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { |
| 1113 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, |
| 1114 |
ee->ee_i_cal[ee_mode]); |
| 1115 |
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, |
| 1116 |
ee->ee_q_cal[ee_mode]); |
| 1117 |
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE); |
| 1118 |
} |
| 1119 |
|
| 1120 |
/* Heavy clipping -disable for now */ |
| 1121 |
if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1) |
| 1122 |
ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); |
| 1123 |
} |
| 1124 |
|
| 1125 |
|
| 1126 |
/*********************\ |
| 1127 |
* Main reset function * |
| 1128 |
\*********************/ |
| 1129 |
|
| 1130 |
/** |
| 1131 |
* ath5k_hw_reset() - The main reset function |
| 1132 |
* @ah: The &struct ath5k_hw |
| 1133 |
* @op_mode: One of enum nl80211_iftype |
| 1134 |
* @channel: The &struct ieee80211_channel |
| 1135 |
* @fast: Enable fast channel switching |
| 1136 |
* @skip_pcu: Skip pcu initialization |
| 1137 |
* |
| 1138 |
* This is the function we call each time we want to (re)initialize the |
| 1139 |
* card and pass new settings to hw. We also call it when hw runs into |
| 1140 |
* trouble to make it come back to a working state. |
| 1141 |
* |
| 1142 |
* Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO |
| 1143 |
* on failure. |
| 1144 |
*/ |
| 1145 |
int |
| 1146 |
ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, |
| 1147 |
struct ieee80211_channel *channel, bool fast, bool skip_pcu) |
| 1148 |
{ |
| 1149 |
u32 s_seq[10], s_led[3], tsf_up, tsf_lo; |
| 1150 |
u8 mode; |
| 1151 |
int i, ret; |
| 1152 |
|
| 1153 |
tsf_up = 0; |
| 1154 |
tsf_lo = 0; |
| 1155 |
mode = 0; |
| 1156 |
|
| 1157 |
/* |
| 1158 |
* Sanity check for fast flag |
| 1159 |
* Fast channel change only available |
| 1160 |
* on AR2413/AR5413. |
| 1161 |
*/ |
| 1162 |
if (fast && (ah->ah_radio != AR5K_RF2413) && |
| 1163 |
(ah->ah_radio != AR5K_RF5413)) |
| 1164 |
fast = false; |
| 1165 |
|
| 1166 |
/* Disable sleep clock operation |
| 1167 |
* to avoid register access delay on certain |
| 1168 |
* PHY registers */ |
| 1169 |
if (ah->ah_version == AR5K_AR5212) |
| 1170 |
ath5k_hw_set_sleep_clock(ah, false); |
| 1171 |
|
| 1172 |
mode = channel->hw_value; |
| 1173 |
switch (mode) { |
| 1174 |
case AR5K_MODE_11A: |
| 1175 |
break; |
| 1176 |
case AR5K_MODE_11G: |
| 1177 |
if (ah->ah_version <= AR5K_AR5211) { |
| 1178 |
ATH5K_ERR(ah, |
| 1179 |
"G mode not available on 5210/5211"); |
| 1180 |
return -EINVAL; |
| 1181 |
} |
| 1182 |
break; |
| 1183 |
case AR5K_MODE_11B: |
| 1184 |
if (ah->ah_version < AR5K_AR5211) { |
| 1185 |
ATH5K_ERR(ah, |
| 1186 |
"B mode not available on 5210"); |
| 1187 |
return -EINVAL; |
| 1188 |
} |
| 1189 |
break; |
| 1190 |
default: |
| 1191 |
ATH5K_ERR(ah, |
| 1192 |
"invalid channel: %d\n", channel->center_freq); |
| 1193 |
return -EINVAL; |
| 1194 |
} |
| 1195 |
|
| 1196 |
/* |
| 1197 |
* If driver requested fast channel change and DMA has stopped |
| 1198 |
* go on. If it fails continue with a normal reset. |
| 1199 |
*/ |
| 1200 |
if (fast) { |
| 1201 |
ret = ath5k_hw_phy_init(ah, channel, mode, true); |
| 1202 |
if (ret) { |
| 1203 |
ATH5K_DBG(ah, ATH5K_DEBUG_RESET, |
| 1204 |
"fast chan change failed, falling back to normal reset\n"); |
| 1205 |
/* Non fatal, can happen eg. |
| 1206 |
* on mode change */ |
| 1207 |
ret = 0; |
| 1208 |
} else { |
| 1209 |
ATH5K_DBG(ah, ATH5K_DEBUG_RESET, |
| 1210 |
"fast chan change successful\n"); |
| 1211 |
return 0; |
| 1212 |
} |
| 1213 |
} |
| 1214 |
|
| 1215 |
/* |
| 1216 |
* Save some registers before a reset |
| 1217 |
*/ |
| 1218 |
if (ah->ah_version != AR5K_AR5210) { |
| 1219 |
/* |
| 1220 |
* Save frame sequence count |
| 1221 |
* For revs. after Oahu, only save |
| 1222 |
* seq num for DCU 0 (Global seq num) |
| 1223 |
*/ |
| 1224 |
if (ah->ah_mac_srev < AR5K_SREV_AR5211) { |
| 1225 |
|
| 1226 |
for (i = 0; i < 10; i++) |
| 1227 |
s_seq[i] = ath5k_hw_reg_read(ah, |
| 1228 |
AR5K_QUEUE_DCU_SEQNUM(i)); |
| 1229 |
|
| 1230 |
} else { |
| 1231 |
s_seq[0] = ath5k_hw_reg_read(ah, |
| 1232 |
AR5K_QUEUE_DCU_SEQNUM(0)); |
| 1233 |
} |
| 1234 |
|
| 1235 |
/* TSF accelerates on AR5211 during reset |
| 1236 |
* As a workaround save it here and restore |
| 1237 |
* it later so that it's back in time after |
| 1238 |
* reset. This way it'll get re-synced on the |
| 1239 |
* next beacon without breaking ad-hoc. |
| 1240 |
* |
| 1241 |
* On AR5212 TSF is almost preserved across a |
| 1242 |
* reset so it stays back in time anyway and |
| 1243 |
* we don't have to save/restore it. |
| 1244 |
* |
| 1245 |
* XXX: Since this breaks power saving we have |
| 1246 |
* to disable power saving until we receive the |
| 1247 |
* next beacon, so we can resync beacon timers */ |
| 1248 |
if (ah->ah_version == AR5K_AR5211) { |
| 1249 |
tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32); |
| 1250 |
tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32); |
| 1251 |
} |
| 1252 |
} |
| 1253 |
|
| 1254 |
|
| 1255 |
/*GPIOs*/ |
| 1256 |
s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & |
| 1257 |
AR5K_PCICFG_LEDSTATE; |
| 1258 |
s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); |
| 1259 |
s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); |
| 1260 |
|
| 1261 |
|
| 1262 |
/* |
| 1263 |
* Since we are going to write rf buffer |
| 1264 |
* check if we have any pending gain_F |
| 1265 |
* optimization settings |
| 1266 |
*/ |
| 1267 |
if (ah->ah_version == AR5K_AR5212 && |
| 1268 |
(ah->ah_radio <= AR5K_RF5112)) { |
| 1269 |
if (!fast && ah->ah_rf_banks != NULL) |
| 1270 |
ath5k_hw_gainf_calibrate(ah); |
| 1271 |
} |
| 1272 |
|
| 1273 |
/* Wakeup the device */ |
| 1274 |
ret = ath5k_hw_nic_wakeup(ah, channel); |
| 1275 |
if (ret) |
| 1276 |
return ret; |
| 1277 |
|
| 1278 |
/* PHY access enable */ |
| 1279 |
if (ah->ah_mac_srev >= AR5K_SREV_AR5211) |
| 1280 |
ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); |
| 1281 |
else |
| 1282 |
ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40, |
| 1283 |
AR5K_PHY(0)); |
| 1284 |
|
| 1285 |
/* Write initial settings */ |
| 1286 |
ret = ath5k_hw_write_initvals(ah, mode, skip_pcu); |
| 1287 |
if (ret) |
| 1288 |
return ret; |
| 1289 |
|
| 1290 |
/* Initialize core clock settings */ |
| 1291 |
ath5k_hw_init_core_clock(ah); |
| 1292 |
|
| 1293 |
/* |
| 1294 |
* Tweak initval settings for revised |
| 1295 |
* chipsets and add some more config |
| 1296 |
* bits |
| 1297 |
*/ |
| 1298 |
ath5k_hw_tweak_initval_settings(ah, channel); |
| 1299 |
|
| 1300 |
/* Commit values from EEPROM */ |
| 1301 |
ath5k_hw_commit_eeprom_settings(ah, channel); |
| 1302 |
|
| 1303 |
|
| 1304 |
/* |
| 1305 |
* Restore saved values |
| 1306 |
*/ |
| 1307 |
|
| 1308 |
/* Seqnum, TSF */ |
| 1309 |
if (ah->ah_version != AR5K_AR5210) { |
| 1310 |
if (ah->ah_mac_srev < AR5K_SREV_AR5211) { |
| 1311 |
for (i = 0; i < 10; i++) |
| 1312 |
ath5k_hw_reg_write(ah, s_seq[i], |
| 1313 |
AR5K_QUEUE_DCU_SEQNUM(i)); |
| 1314 |
} else { |
| 1315 |
ath5k_hw_reg_write(ah, s_seq[0], |
| 1316 |
AR5K_QUEUE_DCU_SEQNUM(0)); |
| 1317 |
} |
| 1318 |
|
| 1319 |
if (ah->ah_version == AR5K_AR5211) { |
| 1320 |
ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32); |
| 1321 |
ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32); |
| 1322 |
} |
| 1323 |
} |
| 1324 |
|
| 1325 |
/* Ledstate */ |
| 1326 |
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); |
| 1327 |
|
| 1328 |
/* Gpio settings */ |
| 1329 |
ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); |
| 1330 |
ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); |
| 1331 |
|
| 1332 |
/* |
| 1333 |
* Initialize PCU |
| 1334 |
*/ |
| 1335 |
ath5k_hw_pcu_init(ah, op_mode); |
| 1336 |
|
| 1337 |
/* |
| 1338 |
* Initialize PHY |
| 1339 |
*/ |
| 1340 |
ret = ath5k_hw_phy_init(ah, channel, mode, false); |
| 1341 |
if (ret) { |
| 1342 |
ATH5K_ERR(ah, |
| 1343 |
"failed to initialize PHY (%i) !\n", ret); |
| 1344 |
return ret; |
| 1345 |
} |
| 1346 |
|
| 1347 |
/* |
| 1348 |
* Configure QCUs/DCUs |
| 1349 |
*/ |
| 1350 |
ret = ath5k_hw_init_queues(ah); |
| 1351 |
if (ret) |
| 1352 |
return ret; |
| 1353 |
|
| 1354 |
|
| 1355 |
/* |
| 1356 |
* Initialize DMA/Interrupts |
| 1357 |
*/ |
| 1358 |
ath5k_hw_dma_init(ah); |
| 1359 |
|
| 1360 |
|
| 1361 |
/* |
| 1362 |
* Enable 32KHz clock function for AR5212+ chips |
| 1363 |
* Set clocks to 32KHz operation and use an |
| 1364 |
* external 32KHz crystal when sleeping if one |
| 1365 |
* exists. |
| 1366 |
* Disabled by default because it is also disabled in |
| 1367 |
* other drivers and it is known to cause stability |
| 1368 |
* issues on some devices |
| 1369 |
*/ |
| 1370 |
if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 && |
| 1371 |
op_mode != NL80211_IFTYPE_AP) |
| 1372 |
ath5k_hw_set_sleep_clock(ah, true); |
| 1373 |
|
| 1374 |
/* |
| 1375 |
* Disable beacons and reset the TSF |
| 1376 |
*/ |
| 1377 |
AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); |
| 1378 |
ath5k_hw_reset_tsf(ah); |
| 1379 |
return 0; |
| 1380 |
} |