| 1 |
/* |
| 2 |
* Copyright (c) 2006-2008 Nick Kossifidis <[email protected]> |
| 3 |
* Copyright (c) 2004-2008 Reyk Floeter <[email protected]> |
| 4 |
* Copyright (c) 2007-2008 Michael Taylor <[email protected]> |
| 5 |
* |
| 6 |
* Permission to use, copy, modify, and distribute this software for any |
| 7 |
* purpose with or without fee is hereby granted, provided that the above |
| 8 |
* copyright notice and this permission notice appear in all copies. |
| 9 |
* |
| 10 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 11 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 12 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 13 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 14 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 15 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 16 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 17 |
* |
| 18 |
*/ |
| 19 |
|
| 20 |
/* |
| 21 |
* Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k |
| 22 |
* maintained by Reyk Floeter |
| 23 |
* |
| 24 |
* I tried to document those registers by looking at ar5k code, some |
| 25 |
* 802.11 (802.11e mostly) papers and by reading various public available |
| 26 |
* Atheros presentations and papers like these: |
| 27 |
* |
| 28 |
* 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf |
| 29 |
* |
| 30 |
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf |
| 31 |
* |
| 32 |
* This file also contains register values found on a memory dump of |
| 33 |
* Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal |
| 34 |
* released by Atheros and on various debug messages found on the net. |
| 35 |
*/ |
| 36 |
|
| 37 |
#include "../reg.h" |
| 38 |
|
| 39 |
/*====MAC DMA REGISTERS====*/ |
| 40 |
|
| 41 |
/* |
| 42 |
* AR5210-Specific TXDP registers |
| 43 |
* 5210 has only 2 transmit queues so no DCU/QCU, just |
| 44 |
* 2 transmit descriptor pointers... |
| 45 |
*/ |
| 46 |
#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ |
| 47 |
#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ |
| 48 |
|
| 49 |
/* |
| 50 |
* Mac Control Register |
| 51 |
*/ |
| 52 |
#define AR5K_CR 0x0008 /* Register Address */ |
| 53 |
#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ |
| 54 |
#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ |
| 55 |
#define AR5K_CR_RXE 0x00000004 /* RX Enable */ |
| 56 |
#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ |
| 57 |
#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ |
| 58 |
#define AR5K_CR_RXD 0x00000020 /* RX Disable */ |
| 59 |
#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ |
| 60 |
|
| 61 |
/* |
| 62 |
* RX Descriptor Pointer register |
| 63 |
*/ |
| 64 |
#define AR5K_RXDP 0x000c |
| 65 |
|
| 66 |
/* |
| 67 |
* Configuration and status register |
| 68 |
*/ |
| 69 |
#define AR5K_CFG 0x0014 /* Register Address */ |
| 70 |
#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ |
| 71 |
#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ |
| 72 |
#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ |
| 73 |
#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ |
| 74 |
#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ |
| 75 |
#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ |
| 76 |
#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ |
| 77 |
#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ |
| 78 |
#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ |
| 79 |
#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ |
| 80 |
#define AR5K_CFG_TXCNT_S 11 |
| 81 |
#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ |
| 82 |
#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ |
| 83 |
#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ |
| 84 |
#define AR5K_CFG_PCI_THRES_S 17 |
| 85 |
|
| 86 |
/* |
| 87 |
* Interrupt enable register |
| 88 |
*/ |
| 89 |
#define AR5K_IER 0x0024 /* Register Address */ |
| 90 |
#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ |
| 91 |
#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ |
| 92 |
|
| 93 |
|
| 94 |
/* |
| 95 |
* 0x0028 is Beacon Control Register on 5210 |
| 96 |
* and first RTS duration register on 5211 |
| 97 |
*/ |
| 98 |
|
| 99 |
/* |
| 100 |
* Beacon control register [5210] |
| 101 |
*/ |
| 102 |
#define AR5K_BCR 0x0028 /* Register Address */ |
| 103 |
#define AR5K_BCR_AP 0x00000000 /* AP mode */ |
| 104 |
#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ |
| 105 |
#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ |
| 106 |
#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ |
| 107 |
#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ |
| 108 |
#define AR5K_BCR_BCGET 0x00000010 |
| 109 |
|
| 110 |
/* |
| 111 |
* First RTS duration register [5211] |
| 112 |
*/ |
| 113 |
#define AR5K_RTSD0 0x0028 /* Register Address */ |
| 114 |
#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ |
| 115 |
#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ |
| 116 |
#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ |
| 117 |
#define AR5K_RTSD0_9_S 8 |
| 118 |
#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ |
| 119 |
#define AR5K_RTSD0_12_S 16 |
| 120 |
#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ |
| 121 |
#define AR5K_RTSD0_18_S 24 |
| 122 |
|
| 123 |
|
| 124 |
/* |
| 125 |
* 0x002c is Beacon Status Register on 5210 |
| 126 |
* and second RTS duration register on 5211 |
| 127 |
*/ |
| 128 |
|
| 129 |
/* |
| 130 |
* Beacon status register [5210] |
| 131 |
* |
| 132 |
* As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR |
| 133 |
* for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning |
| 134 |
* here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). |
| 135 |
* So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i |
| 136 |
* renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what |
| 137 |
* else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. |
| 138 |
*/ |
| 139 |
#define AR5K_BSR 0x002c /* Register Address */ |
| 140 |
#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ |
| 141 |
#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ |
| 142 |
#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ |
| 143 |
#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ |
| 144 |
#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ |
| 145 |
#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ |
| 146 |
#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ |
| 147 |
#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ |
| 148 |
#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ |
| 149 |
#define AR5K_BSR_SWBA_CNT 0x00ff0000 |
| 150 |
|
| 151 |
/* |
| 152 |
* Second RTS duration register [5211] |
| 153 |
*/ |
| 154 |
#define AR5K_RTSD1 0x002c /* Register Address */ |
| 155 |
#define AR5K_RTSD1_24 0x000000ff /* 24Mb */ |
| 156 |
#define AR5K_RTSD1_24_S 0 |
| 157 |
#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ |
| 158 |
#define AR5K_RTSD1_36_S 8 |
| 159 |
#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ |
| 160 |
#define AR5K_RTSD1_48_S 16 |
| 161 |
#define AR5K_RTSD1_54 0xff000000 /* 54Mb */ |
| 162 |
#define AR5K_RTSD1_54_S 24 |
| 163 |
|
| 164 |
|
| 165 |
/* |
| 166 |
* Transmit configuration register |
| 167 |
*/ |
| 168 |
#define AR5K_TXCFG 0x0030 /* Register Address */ |
| 169 |
#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ |
| 170 |
#define AR5K_TXCFG_SDMAMR_S 0 |
| 171 |
#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ |
| 172 |
#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ |
| 173 |
#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ |
| 174 |
#define AR5K_TXCFG_TXFULL_S 4 |
| 175 |
#define AR5K_TXCFG_TXFULL_0B 0x00000000 |
| 176 |
#define AR5K_TXCFG_TXFULL_64B 0x00000010 |
| 177 |
#define AR5K_TXCFG_TXFULL_128B 0x00000020 |
| 178 |
#define AR5K_TXCFG_TXFULL_192B 0x00000030 |
| 179 |
#define AR5K_TXCFG_TXFULL_256B 0x00000040 |
| 180 |
#define AR5K_TXCFG_TXCONT_EN 0x00000080 |
| 181 |
#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ |
| 182 |
#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ |
| 183 |
#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ |
| 184 |
#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ |
| 185 |
#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ |
| 186 |
#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ |
| 187 |
#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ |
| 188 |
#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ |
| 189 |
#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ |
| 190 |
#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ |
| 191 |
|
| 192 |
/* |
| 193 |
* Receive configuration register |
| 194 |
*/ |
| 195 |
#define AR5K_RXCFG 0x0034 /* Register Address */ |
| 196 |
#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ |
| 197 |
#define AR5K_RXCFG_SDMAMW_S 0 |
| 198 |
#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ |
| 199 |
#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ |
| 200 |
#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ |
| 201 |
#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ |
| 202 |
#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ |
| 203 |
|
| 204 |
/* |
| 205 |
* Receive jumbo descriptor last address register |
| 206 |
* Only found in 5211 (?) |
| 207 |
*/ |
| 208 |
#define AR5K_RXJLA 0x0038 |
| 209 |
|
| 210 |
/* |
| 211 |
* MIB control register |
| 212 |
*/ |
| 213 |
#define AR5K_MIBC 0x0040 /* Register Address */ |
| 214 |
#define AR5K_MIBC_COW 0x00000001 /* Counter Overflow Warning */ |
| 215 |
#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ |
| 216 |
#define AR5K_MIBC_CMC 0x00000004 /* Clear MIB Counters */ |
| 217 |
#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */ |
| 218 |
|
| 219 |
/* |
| 220 |
* Timeout prescale register |
| 221 |
*/ |
| 222 |
#define AR5K_TOPS 0x0044 |
| 223 |
#define AR5K_TOPS_M 0x0000ffff |
| 224 |
|
| 225 |
/* |
| 226 |
* Receive timeout register (no frame received) |
| 227 |
*/ |
| 228 |
#define AR5K_RXNOFRM 0x0048 |
| 229 |
#define AR5K_RXNOFRM_M 0x000003ff |
| 230 |
|
| 231 |
/* |
| 232 |
* Transmit timeout register (no frame sent) |
| 233 |
*/ |
| 234 |
#define AR5K_TXNOFRM 0x004c |
| 235 |
#define AR5K_TXNOFRM_M 0x000003ff |
| 236 |
#define AR5K_TXNOFRM_QCU 0x000ffc00 |
| 237 |
#define AR5K_TXNOFRM_QCU_S 10 |
| 238 |
|
| 239 |
/* |
| 240 |
* Receive frame gap timeout register |
| 241 |
*/ |
| 242 |
#define AR5K_RPGTO 0x0050 |
| 243 |
#define AR5K_RPGTO_M 0x000003ff |
| 244 |
|
| 245 |
/* |
| 246 |
* Receive frame count limit register |
| 247 |
*/ |
| 248 |
#define AR5K_RFCNT 0x0054 |
| 249 |
#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ |
| 250 |
#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ |
| 251 |
|
| 252 |
/* |
| 253 |
* Misc settings register |
| 254 |
* (reserved0-3) |
| 255 |
*/ |
| 256 |
#define AR5K_MISC 0x0058 /* Register Address */ |
| 257 |
#define AR5K_MISC_DMA_OBS_M 0x000001e0 |
| 258 |
#define AR5K_MISC_DMA_OBS_S 5 |
| 259 |
#define AR5K_MISC_MISC_OBS_M 0x00000e00 |
| 260 |
#define AR5K_MISC_MISC_OBS_S 9 |
| 261 |
#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 |
| 262 |
#define AR5K_MISC_MAC_OBS_LSB_S 12 |
| 263 |
#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 |
| 264 |
#define AR5K_MISC_MAC_OBS_MSB_S 15 |
| 265 |
#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ |
| 266 |
#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ |
| 267 |
|
| 268 |
/* |
| 269 |
* QCU/DCU clock gating register (5311) |
| 270 |
* (reserved4-5) |
| 271 |
*/ |
| 272 |
#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ |
| 273 |
#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ |
| 274 |
#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ |
| 275 |
|
| 276 |
/* |
| 277 |
* Interrupt Status Registers |
| 278 |
* |
| 279 |
* For 5210 there is only one status register but for |
| 280 |
* 5211/5212 we have one primary and 4 secondary registers. |
| 281 |
* So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. |
| 282 |
* Most of these bits are common for all chipsets. |
| 283 |
* |
| 284 |
* NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain |
| 285 |
* the logical OR from per-queue interrupt bits found on SISR registers |
| 286 |
* (see below). |
| 287 |
*/ |
| 288 |
#define AR5K_ISR 0x001c /* Register Address [5210] */ |
| 289 |
#define AR5K_PISR 0x0080 /* Register Address [5211+] */ |
| 290 |
#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ |
| 291 |
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ |
| 292 |
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */ |
| 293 |
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ |
| 294 |
#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ |
| 295 |
#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ |
| 296 |
#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ |
| 297 |
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ |
| 298 |
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ |
| 299 |
#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) |
| 300 |
* NOTE: We don't have per-queue info for this |
| 301 |
* one, but we can enable it per-queue through |
| 302 |
* TXNOFRM_QCU field on TXNOFRM register */ |
| 303 |
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ |
| 304 |
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ |
| 305 |
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ |
| 306 |
#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ |
| 307 |
#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ |
| 308 |
#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ |
| 309 |
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ |
| 310 |
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ |
| 311 |
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ |
| 312 |
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] |
| 313 |
* 'or' of MCABT, SSERR, DPERR from SISR2 */ |
| 314 |
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ |
| 315 |
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ |
| 316 |
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ |
| 317 |
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ |
| 318 |
#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */ |
| 319 |
#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ |
| 320 |
#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ |
| 321 |
#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt |
| 322 |
* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, |
| 323 |
* CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ |
| 324 |
#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ |
| 325 |
#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ |
| 326 |
#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ |
| 327 |
#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ |
| 328 |
|
| 329 |
#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\ |
| 330 |
AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\ |
| 331 |
AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\ |
| 332 |
AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\ |
| 333 |
AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG) |
| 334 |
|
| 335 |
/* |
| 336 |
* Secondary status registers [5211+] (0 - 4) |
| 337 |
* |
| 338 |
* These give the status for each QCU, only QCUs 0-9 are |
| 339 |
* represented. |
| 340 |
*/ |
| 341 |
#define AR5K_SISR0 0x0084 /* Register Address [5211+] */ |
| 342 |
#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ |
| 343 |
#define AR5K_SISR0_QCU_TXOK_S 0 |
| 344 |
#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ |
| 345 |
#define AR5K_SISR0_QCU_TXDESC_S 16 |
| 346 |
|
| 347 |
#define AR5K_SISR1 0x0088 /* Register Address [5211+] */ |
| 348 |
#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ |
| 349 |
#define AR5K_SISR1_QCU_TXERR_S 0 |
| 350 |
#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ |
| 351 |
#define AR5K_SISR1_QCU_TXEOL_S 16 |
| 352 |
|
| 353 |
#define AR5K_SISR2 0x008c /* Register Address [5211+] */ |
| 354 |
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ |
| 355 |
#define AR5K_SISR2_QCU_TXURN_S 0 |
| 356 |
#define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */ |
| 357 |
#define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */ |
| 358 |
#define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */ |
| 359 |
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ |
| 360 |
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ |
| 361 |
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ |
| 362 |
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ |
| 363 |
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ |
| 364 |
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ |
| 365 |
#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */ |
| 366 |
|
| 367 |
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */ |
| 368 |
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ |
| 369 |
#define AR5K_SISR3_QCBRORN_S 0 |
| 370 |
#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ |
| 371 |
#define AR5K_SISR3_QCBRURN_S 16 |
| 372 |
|
| 373 |
#define AR5K_SISR4 0x0094 /* Register Address [5211+] */ |
| 374 |
#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ |
| 375 |
#define AR5K_SISR4_QTRIG_S 0 |
| 376 |
|
| 377 |
/* |
| 378 |
* Shadow read-and-clear interrupt status registers [5211+] |
| 379 |
*/ |
| 380 |
#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ |
| 381 |
#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ |
| 382 |
#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ |
| 383 |
#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ |
| 384 |
#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ |
| 385 |
#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ |
| 386 |
|
| 387 |
/* |
| 388 |
* Interrupt Mask Registers |
| 389 |
* |
| 390 |
* As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary |
| 391 |
* (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. |
| 392 |
*/ |
| 393 |
#define AR5K_IMR 0x0020 /* Register Address [5210] */ |
| 394 |
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ |
| 395 |
#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ |
| 396 |
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ |
| 397 |
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ |
| 398 |
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ |
| 399 |
#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ |
| 400 |
#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ |
| 401 |
#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ |
| 402 |
#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ |
| 403 |
#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ |
| 404 |
#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ |
| 405 |
#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ |
| 406 |
#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ |
| 407 |
#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ |
| 408 |
#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ |
| 409 |
#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ |
| 410 |
#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ |
| 411 |
#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ |
| 412 |
#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ |
| 413 |
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ |
| 414 |
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ |
| 415 |
#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ |
| 416 |
#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ |
| 417 |
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ |
| 418 |
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ |
| 419 |
#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ |
| 420 |
#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ |
| 421 |
#define AR5K_IMR_TIM 0x00800000 /* [5211+] */ |
| 422 |
#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, |
| 423 |
CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ |
| 424 |
#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ |
| 425 |
#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ |
| 426 |
#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ |
| 427 |
#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ |
| 428 |
|
| 429 |
/* |
| 430 |
* Secondary interrupt mask registers [5211+] (0 - 4) |
| 431 |
*/ |
| 432 |
#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ |
| 433 |
#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ |
| 434 |
#define AR5K_SIMR0_QCU_TXOK_S 0 |
| 435 |
#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ |
| 436 |
#define AR5K_SIMR0_QCU_TXDESC_S 16 |
| 437 |
|
| 438 |
#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ |
| 439 |
#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ |
| 440 |
#define AR5K_SIMR1_QCU_TXERR_S 0 |
| 441 |
#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ |
| 442 |
#define AR5K_SIMR1_QCU_TXEOL_S 16 |
| 443 |
|
| 444 |
#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ |
| 445 |
#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ |
| 446 |
#define AR5K_SIMR2_QCU_TXURN_S 0 |
| 447 |
#define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */ |
| 448 |
#define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */ |
| 449 |
#define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */ |
| 450 |
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ |
| 451 |
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ |
| 452 |
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ |
| 453 |
#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ |
| 454 |
#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ |
| 455 |
#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ |
| 456 |
#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ |
| 457 |
|
| 458 |
#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ |
| 459 |
#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ |
| 460 |
#define AR5K_SIMR3_QCBRORN_S 0 |
| 461 |
#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ |
| 462 |
#define AR5K_SIMR3_QCBRURN_S 16 |
| 463 |
|
| 464 |
#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ |
| 465 |
#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ |
| 466 |
#define AR5K_SIMR4_QTRIG_S 0 |
| 467 |
|
| 468 |
/* |
| 469 |
* DMA Debug registers 0-7 |
| 470 |
* 0xe0 - 0xfc |
| 471 |
*/ |
| 472 |
|
| 473 |
/* |
| 474 |
* Decompression mask registers [5212+] |
| 475 |
*/ |
| 476 |
#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ |
| 477 |
#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ |
| 478 |
|
| 479 |
/* |
| 480 |
* Wake On Wireless pattern control register [5212+] |
| 481 |
*/ |
| 482 |
#define AR5K_WOW_PCFG 0x0410 /* Register Address */ |
| 483 |
#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ |
| 484 |
#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ |
| 485 |
#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ |
| 486 |
#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ |
| 487 |
#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ |
| 488 |
#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ |
| 489 |
#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ |
| 490 |
#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ |
| 491 |
#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ |
| 492 |
|
| 493 |
/* |
| 494 |
* Wake On Wireless pattern index register (?) [5212+] |
| 495 |
*/ |
| 496 |
#define AR5K_WOW_PAT_IDX 0x0414 |
| 497 |
|
| 498 |
/* |
| 499 |
* Wake On Wireless pattern data register [5212+] |
| 500 |
*/ |
| 501 |
#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ |
| 502 |
#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ |
| 503 |
#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ |
| 504 |
#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ |
| 505 |
#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ |
| 506 |
#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ |
| 507 |
#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ |
| 508 |
|
| 509 |
/* |
| 510 |
* Decompression configuration registers [5212+] |
| 511 |
*/ |
| 512 |
#define AR5K_DCCFG 0x0420 /* Register Address */ |
| 513 |
#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ |
| 514 |
#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ |
| 515 |
#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ |
| 516 |
#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ |
| 517 |
|
| 518 |
/* |
| 519 |
* Compression configuration registers [5212+] |
| 520 |
*/ |
| 521 |
#define AR5K_CCFG 0x0600 /* Register Address */ |
| 522 |
#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ |
| 523 |
#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ |
| 524 |
|
| 525 |
#define AR5K_CCFG_CCU 0x0604 /* Register Address */ |
| 526 |
#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ |
| 527 |
#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ |
| 528 |
#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ |
| 529 |
#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ |
| 530 |
#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ |
| 531 |
|
| 532 |
/* |
| 533 |
* Compression performance counter registers [5212+] |
| 534 |
*/ |
| 535 |
#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ |
| 536 |
#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ |
| 537 |
#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ |
| 538 |
#define AR5K_CPC3 0x061c /* Compression performance counter 3 */ |
| 539 |
#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ |
| 540 |
|
| 541 |
|
| 542 |
/* |
| 543 |
* Queue control unit (QCU) registers [5211+] |
| 544 |
* |
| 545 |
* Card has 12 TX Queues but i see that only 0-9 are used (?) |
| 546 |
* both in binary HAL (see ah.h) and ar5k. Each queue has its own |
| 547 |
* TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) |
| 548 |
* configuration register (0x08c0 - 0x08ec), a ready time configuration |
| 549 |
* register (0x0900 - 0x092c), a misc configuration register (0x09c0 - |
| 550 |
* 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some |
| 551 |
* global registers, QCU transmit enable/disable and "one shot arm (?)" |
| 552 |
* set/clear, which contain status for all queues (we shift by 1 for each |
| 553 |
* queue). To access these registers easily we define some macros here |
| 554 |
* that are used inside HAL. For more infos check out *_tx_queue functs. |
| 555 |
*/ |
| 556 |
|
| 557 |
/* |
| 558 |
* Generic QCU Register access macros |
| 559 |
*/ |
| 560 |
#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) |
| 561 |
#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) |
| 562 |
#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) |
| 563 |
|
| 564 |
/* |
| 565 |
* QCU Transmit descriptor pointer registers |
| 566 |
*/ |
| 567 |
#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ |
| 568 |
#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) |
| 569 |
|
| 570 |
/* |
| 571 |
* QCU Transmit enable register |
| 572 |
*/ |
| 573 |
#define AR5K_QCU_TXE 0x0840 |
| 574 |
#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) |
| 575 |
#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) |
| 576 |
|
| 577 |
/* |
| 578 |
* QCU Transmit disable register |
| 579 |
*/ |
| 580 |
#define AR5K_QCU_TXD 0x0880 |
| 581 |
#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) |
| 582 |
#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) |
| 583 |
|
| 584 |
/* |
| 585 |
* QCU Constant Bit Rate configuration registers |
| 586 |
*/ |
| 587 |
#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ |
| 588 |
#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ |
| 589 |
#define AR5K_QCU_CBRCFG_INTVAL_S 0 |
| 590 |
#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ |
| 591 |
#define AR5K_QCU_CBRCFG_ORN_THRES_S 24 |
| 592 |
#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) |
| 593 |
|
| 594 |
/* |
| 595 |
* QCU Ready time configuration registers |
| 596 |
*/ |
| 597 |
#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ |
| 598 |
#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ |
| 599 |
#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 |
| 600 |
#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ |
| 601 |
#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) |
| 602 |
|
| 603 |
/* |
| 604 |
* QCU one shot arm set registers |
| 605 |
*/ |
| 606 |
#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ |
| 607 |
#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff |
| 608 |
|
| 609 |
/* |
| 610 |
* QCU one shot arm clear registers |
| 611 |
*/ |
| 612 |
#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ |
| 613 |
#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff |
| 614 |
|
| 615 |
/* |
| 616 |
* QCU misc registers |
| 617 |
*/ |
| 618 |
#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ |
| 619 |
#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ |
| 620 |
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ |
| 621 |
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ |
| 622 |
#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ |
| 623 |
#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ |
| 624 |
#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ |
| 625 |
#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ |
| 626 |
#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ |
| 627 |
#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ |
| 628 |
#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ |
| 629 |
#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ |
| 630 |
#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ |
| 631 |
#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ |
| 632 |
#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ |
| 633 |
#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ |
| 634 |
#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) |
| 635 |
|
| 636 |
|
| 637 |
/* |
| 638 |
* QCU status registers |
| 639 |
*/ |
| 640 |
#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ |
| 641 |
#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ |
| 642 |
#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ |
| 643 |
#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) |
| 644 |
|
| 645 |
/* |
| 646 |
* QCU ready time shutdown register |
| 647 |
*/ |
| 648 |
#define AR5K_QCU_RDYTIMESHDN 0x0a40 |
| 649 |
#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff |
| 650 |
|
| 651 |
/* |
| 652 |
* QCU compression buffer base registers [5212+] |
| 653 |
*/ |
| 654 |
#define AR5K_QCU_CBB_SELECT 0x0b00 |
| 655 |
#define AR5K_QCU_CBB_ADDR 0x0b04 |
| 656 |
#define AR5K_QCU_CBB_ADDR_S 9 |
| 657 |
|
| 658 |
/* |
| 659 |
* QCU compression buffer configuration register [5212+] |
| 660 |
* (buffer size) |
| 661 |
*/ |
| 662 |
#define AR5K_QCU_CBCFG 0x0b08 |
| 663 |
|
| 664 |
|
| 665 |
|
| 666 |
/* |
| 667 |
* Distributed Coordination Function (DCF) control unit (DCU) |
| 668 |
* registers [5211+] |
| 669 |
* |
| 670 |
* These registers control the various characteristics of each queue |
| 671 |
* for 802.11e (WME) compatibility so they go together with |
| 672 |
* QCU registers in pairs. For each queue we have a QCU mask register, |
| 673 |
* (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), |
| 674 |
* a retry limit register (0x1080 - 0x10ac), a channel time register |
| 675 |
* (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and |
| 676 |
* a sequence number register (0x1140 - 0x116c). It seems that "global" |
| 677 |
* registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). |
| 678 |
* We use the same macros here for easier register access. |
| 679 |
* |
| 680 |
*/ |
| 681 |
|
| 682 |
/* |
| 683 |
* DCU QCU mask registers |
| 684 |
*/ |
| 685 |
#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ |
| 686 |
#define AR5K_DCU_QCUMASK_M 0x000003ff |
| 687 |
#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) |
| 688 |
|
| 689 |
/* |
| 690 |
* DCU local Inter Frame Space settings register |
| 691 |
*/ |
| 692 |
#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ |
| 693 |
#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ |
| 694 |
#define AR5K_DCU_LCL_IFS_CW_MIN_S 0 |
| 695 |
#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ |
| 696 |
#define AR5K_DCU_LCL_IFS_CW_MAX_S 10 |
| 697 |
#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ |
| 698 |
#define AR5K_DCU_LCL_IFS_AIFS_S 20 |
| 699 |
#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ |
| 700 |
#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) |
| 701 |
|
| 702 |
/* |
| 703 |
* DCU retry limit registers |
| 704 |
* all these fields don't allow zero values |
| 705 |
*/ |
| 706 |
#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ |
| 707 |
#define AR5K_DCU_RETRY_LMT_RTS 0x0000000f /* RTS failure limit. Transmission fails if no CTS is received for this number of times */ |
| 708 |
#define AR5K_DCU_RETRY_LMT_RTS_S 0 |
| 709 |
#define AR5K_DCU_RETRY_LMT_STA_RTS 0x00003f00 /* STA RTS failure limit. If exceeded CW reset */ |
| 710 |
#define AR5K_DCU_RETRY_LMT_STA_RTS_S 8 |
| 711 |
#define AR5K_DCU_RETRY_LMT_STA_DATA 0x000fc000 /* STA data failure limit. If exceeded CW reset. */ |
| 712 |
#define AR5K_DCU_RETRY_LMT_STA_DATA_S 14 |
| 713 |
#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) |
| 714 |
|
| 715 |
/* |
| 716 |
* DCU channel time registers |
| 717 |
*/ |
| 718 |
#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ |
| 719 |
#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ |
| 720 |
#define AR5K_DCU_CHAN_TIME_DUR_S 0 |
| 721 |
#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ |
| 722 |
#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) |
| 723 |
|
| 724 |
/* |
| 725 |
* DCU misc registers [5211+] |
| 726 |
* |
| 727 |
* Note: Arbiter lockout control controls the |
| 728 |
* behaviour on low priority queues when we have multiple queues |
| 729 |
* with pending frames. Intra-frame lockout means we wait until |
| 730 |
* the queue's current frame transmits (with post frame backoff and bursting) |
| 731 |
* before we transmit anything else and global lockout means we |
| 732 |
* wait for the whole queue to finish before higher priority queues |
| 733 |
* can transmit (this is used on beacon and CAB queues). |
| 734 |
* No lockout means there is no special handling. |
| 735 |
*/ |
| 736 |
#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ |
| 737 |
#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ |
| 738 |
#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series |
| 739 |
station RTS/data failure count |
| 740 |
reset policy (?) */ |
| 741 |
#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series |
| 742 |
CW reset policy */ |
| 743 |
#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ |
| 744 |
#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ |
| 745 |
#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ |
| 746 |
#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ |
| 747 |
#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ |
| 748 |
#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ |
| 749 |
#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 |
| 750 |
#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 |
| 751 |
#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ |
| 752 |
#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ |
| 753 |
#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 |
| 754 |
#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ |
| 755 |
#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ |
| 756 |
#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ |
| 757 |
#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ |
| 758 |
#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ |
| 759 |
#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ |
| 760 |
#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ |
| 761 |
#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ |
| 762 |
#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ |
| 763 |
#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) |
| 764 |
|
| 765 |
/* |
| 766 |
* DCU frame sequence number registers |
| 767 |
*/ |
| 768 |
#define AR5K_DCU_SEQNUM_BASE 0x1140 |
| 769 |
#define AR5K_DCU_SEQNUM_M 0x00000fff |
| 770 |
#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) |
| 771 |
|
| 772 |
/* |
| 773 |
* DCU global IFS SIFS register |
| 774 |
*/ |
| 775 |
#define AR5K_DCU_GBL_IFS_SIFS 0x1030 |
| 776 |
#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff |
| 777 |
|
| 778 |
/* |
| 779 |
* DCU global IFS slot interval register |
| 780 |
*/ |
| 781 |
#define AR5K_DCU_GBL_IFS_SLOT 0x1070 |
| 782 |
#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff |
| 783 |
|
| 784 |
/* |
| 785 |
* DCU global IFS EIFS register |
| 786 |
*/ |
| 787 |
#define AR5K_DCU_GBL_IFS_EIFS 0x10b0 |
| 788 |
#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff |
| 789 |
|
| 790 |
/* |
| 791 |
* DCU global IFS misc register |
| 792 |
* |
| 793 |
* LFSR stands for Linear Feedback Shift Register |
| 794 |
* and it's used for generating pseudo-random |
| 795 |
* number sequences. |
| 796 |
* |
| 797 |
* (If i understand correctly, random numbers are |
| 798 |
* used for idle sensing -multiplied with cwmin/max etc-) |
| 799 |
*/ |
| 800 |
#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ |
| 801 |
#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ |
| 802 |
#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ |
| 803 |
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ |
| 804 |
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S 4 |
| 805 |
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ |
| 806 |
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 |
| 807 |
#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ |
| 808 |
#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ |
| 809 |
#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ |
| 810 |
#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ |
| 811 |
|
| 812 |
/* |
| 813 |
* DCU frame prefetch control register |
| 814 |
*/ |
| 815 |
#define AR5K_DCU_FP 0x1230 /* Register Address */ |
| 816 |
#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ |
| 817 |
#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ |
| 818 |
#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ |
| 819 |
|
| 820 |
/* |
| 821 |
* DCU transmit pause control/status register |
| 822 |
*/ |
| 823 |
#define AR5K_DCU_TXP 0x1270 /* Register Address */ |
| 824 |
#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ |
| 825 |
#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ |
| 826 |
|
| 827 |
/* |
| 828 |
* DCU transmit filter table 0 (32 entries) |
| 829 |
* each entry contains a 32bit slice of the |
| 830 |
* 128bit tx filter for each DCU (4 slices per DCU) |
| 831 |
*/ |
| 832 |
#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 |
| 833 |
#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) |
| 834 |
|
| 835 |
/* |
| 836 |
* DCU transmit filter table 1 (16 entries) |
| 837 |
*/ |
| 838 |
#define AR5K_DCU_TX_FILTER_1_BASE 0x103c |
| 839 |
#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) |
| 840 |
|
| 841 |
/* |
| 842 |
* DCU clear transmit filter register |
| 843 |
*/ |
| 844 |
#define AR5K_DCU_TX_FILTER_CLR 0x143c |
| 845 |
|
| 846 |
/* |
| 847 |
* DCU set transmit filter register |
| 848 |
*/ |
| 849 |
#define AR5K_DCU_TX_FILTER_SET 0x147c |
| 850 |
|
| 851 |
/* |
| 852 |
* Reset control register |
| 853 |
*/ |
| 854 |
#define AR5K_RESET_CTL 0x4000 /* Register Address */ |
| 855 |
#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ |
| 856 |
#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ |
| 857 |
#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ |
| 858 |
#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ |
| 859 |
#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ |
| 860 |
#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ |
| 861 |
|
| 862 |
/* |
| 863 |
* Sleep control register |
| 864 |
*/ |
| 865 |
#define AR5K_SLEEP_CTL 0x4004 /* Register Address */ |
| 866 |
#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ |
| 867 |
#define AR5K_SLEEP_CTL_SLDUR_S 0 |
| 868 |
#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ |
| 869 |
#define AR5K_SLEEP_CTL_SLE_S 16 |
| 870 |
#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ |
| 871 |
#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ |
| 872 |
#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ |
| 873 |
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ |
| 874 |
#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ |
| 875 |
#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ |
| 876 |
#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ |
| 877 |
|
| 878 |
/* |
| 879 |
* Interrupt pending register |
| 880 |
*/ |
| 881 |
#define AR5K_INTPEND 0x4008 |
| 882 |
#define AR5K_INTPEND_M 0x00000001 |
| 883 |
|
| 884 |
/* |
| 885 |
* Sleep force register |
| 886 |
*/ |
| 887 |
#define AR5K_SFR 0x400c |
| 888 |
#define AR5K_SFR_EN 0x00000001 |
| 889 |
|
| 890 |
/* |
| 891 |
* PCI configuration register |
| 892 |
* TODO: Fix LED stuff |
| 893 |
*/ |
| 894 |
#define AR5K_PCICFG 0x4010 /* Register Address */ |
| 895 |
#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ |
| 896 |
#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ |
| 897 |
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ |
| 898 |
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ |
| 899 |
#define AR5K_PCICFG_EESIZE_S 3 |
| 900 |
#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ |
| 901 |
#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ |
| 902 |
#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ |
| 903 |
#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ |
| 904 |
#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ |
| 905 |
#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ |
| 906 |
#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ |
| 907 |
#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ |
| 908 |
#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ |
| 909 |
#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ |
| 910 |
#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ |
| 911 |
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ |
| 912 |
#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ |
| 913 |
#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ |
| 914 |
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ |
| 915 |
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ |
| 916 |
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ |
| 917 |
#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ |
| 918 |
#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ |
| 919 |
#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ |
| 920 |
#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ |
| 921 |
#define AR5K_PCICFG_LEDBLINK_S 20 |
| 922 |
#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ |
| 923 |
#define AR5K_PCICFG_LEDSTATE \ |
| 924 |
(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ |
| 925 |
AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) |
| 926 |
#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ |
| 927 |
#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 |
| 928 |
|
| 929 |
/* |
| 930 |
* "General Purpose Input/Output" (GPIO) control register |
| 931 |
* |
| 932 |
* I'm not sure about this but after looking at the code |
| 933 |
* for all chipsets here is what i got. |
| 934 |
* |
| 935 |
* We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) |
| 936 |
* Mode 0 -> always input |
| 937 |
* Mode 1 -> output when GPIODO for this GPIO is set to 0 |
| 938 |
* Mode 2 -> output when GPIODO for this GPIO is set to 1 |
| 939 |
* Mode 3 -> always output |
| 940 |
* |
| 941 |
* For more infos check out get_gpio/set_gpio and |
| 942 |
* set_gpio_input/set_gpio_output functs. |
| 943 |
* For more infos on gpio interrupt check out set_gpio_intr. |
| 944 |
*/ |
| 945 |
#define AR5K_NUM_GPIO 6 |
| 946 |
|
| 947 |
#define AR5K_GPIOCR 0x4014 /* Register Address */ |
| 948 |
#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ |
| 949 |
#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ |
| 950 |
#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ |
| 951 |
#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ |
| 952 |
#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ |
| 953 |
#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ |
| 954 |
#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ |
| 955 |
#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ |
| 956 |
|
| 957 |
/* |
| 958 |
* "General Purpose Input/Output" (GPIO) data output register |
| 959 |
*/ |
| 960 |
#define AR5K_GPIODO 0x4018 |
| 961 |
|
| 962 |
/* |
| 963 |
* "General Purpose Input/Output" (GPIO) data input register |
| 964 |
*/ |
| 965 |
#define AR5K_GPIODI 0x401c |
| 966 |
#define AR5K_GPIODI_M 0x0000002f |
| 967 |
|
| 968 |
/* |
| 969 |
* Silicon revision register |
| 970 |
*/ |
| 971 |
#define AR5K_SREV 0x4020 /* Register Address */ |
| 972 |
#define AR5K_SREV_REV 0x0000000f /* Mask for revision */ |
| 973 |
#define AR5K_SREV_REV_S 0 |
| 974 |
#define AR5K_SREV_VER 0x000000ff /* Mask for version */ |
| 975 |
#define AR5K_SREV_VER_S 4 |
| 976 |
|
| 977 |
/* |
| 978 |
* TXE write posting register |
| 979 |
*/ |
| 980 |
#define AR5K_TXEPOST 0x4028 |
| 981 |
|
| 982 |
/* |
| 983 |
* QCU sleep mask |
| 984 |
*/ |
| 985 |
#define AR5K_QCU_SLEEP_MASK 0x402c |
| 986 |
|
| 987 |
/* 0x4068 is compression buffer configuration |
| 988 |
* register on 5414 and pm configuration register |
| 989 |
* on 5424 and newer pci-e chips. */ |
| 990 |
|
| 991 |
/* |
| 992 |
* Compression buffer configuration |
| 993 |
* register (enable/disable) [5414] |
| 994 |
*/ |
| 995 |
#define AR5K_5414_CBCFG 0x4068 |
| 996 |
#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ |
| 997 |
|
| 998 |
/* |
| 999 |
* PCI-E Power management configuration |
| 1000 |
* and status register [5424+] |
| 1001 |
*/ |
| 1002 |
#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ |
| 1003 |
/* Only 5424 */ |
| 1004 |
#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 |
| 1005 |
when d2_sleep_en is asserted */ |
| 1006 |
#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ |
| 1007 |
#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ |
| 1008 |
#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes |
| 1009 |
down */ |
| 1010 |
/* Wake On Wireless */ |
| 1011 |
#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ |
| 1012 |
#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ |
| 1013 |
#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ |
| 1014 |
#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 |
| 1015 |
#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 |
| 1016 |
#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 |
| 1017 |
#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 |
| 1018 |
|
| 1019 |
/* |
| 1020 |
* PCI-E Workaround enable register |
| 1021 |
*/ |
| 1022 |
#define AR5K_PCIE_WAEN 0x407c |
| 1023 |
|
| 1024 |
/* |
| 1025 |
* PCI-E Serializer/Deserializer |
| 1026 |
* registers |
| 1027 |
*/ |
| 1028 |
#define AR5K_PCIE_SERDES 0x4080 |
| 1029 |
#define AR5K_PCIE_SERDES_RESET 0x4084 |
| 1030 |
|
| 1031 |
/*====EEPROM REGISTERS====*/ |
| 1032 |
|
| 1033 |
/* |
| 1034 |
* EEPROM access registers |
| 1035 |
* |
| 1036 |
* Here we got a difference between 5210/5211-12 |
| 1037 |
* read data register for 5210 is at 0x6800 and |
| 1038 |
* status register is at 0x6c00. There is also |
| 1039 |
* no eeprom command register on 5210 and the |
| 1040 |
* offsets are different. |
| 1041 |
* |
| 1042 |
* To read eeprom data for a specific offset: |
| 1043 |
* 5210 - enable eeprom access (AR5K_PCICFG_EEAE) |
| 1044 |
* read AR5K_EEPROM_BASE +(4 * offset) |
| 1045 |
* check the eeprom status register |
| 1046 |
* and read eeprom data register. |
| 1047 |
* |
| 1048 |
* 5211 - write offset to AR5K_EEPROM_BASE |
| 1049 |
* 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD |
| 1050 |
* check the eeprom status register |
| 1051 |
* and read eeprom data register. |
| 1052 |
* |
| 1053 |
* To write eeprom data for a specific offset: |
| 1054 |
* 5210 - enable eeprom access (AR5K_PCICFG_EEAE) |
| 1055 |
* write data to AR5K_EEPROM_BASE +(4 * offset) |
| 1056 |
* check the eeprom status register |
| 1057 |
* 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD |
| 1058 |
* 5212 write offset to AR5K_EEPROM_BASE |
| 1059 |
* write data to data register |
| 1060 |
* write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD |
| 1061 |
* check the eeprom status register |
| 1062 |
* |
| 1063 |
* For more infos check eeprom_* functs and the ar5k.c |
| 1064 |
* file posted in madwifi-devel mailing list. |
| 1065 |
* http://sourceforge.net/mailarchive/message.php?msg_id=8966525 |
| 1066 |
* |
| 1067 |
*/ |
| 1068 |
#define AR5K_EEPROM_BASE 0x6000 |
| 1069 |
|
| 1070 |
/* |
| 1071 |
* EEPROM data register |
| 1072 |
*/ |
| 1073 |
#define AR5K_EEPROM_DATA_5211 0x6004 |
| 1074 |
#define AR5K_EEPROM_DATA_5210 0x6800 |
| 1075 |
#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ |
| 1076 |
AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) |
| 1077 |
|
| 1078 |
/* |
| 1079 |
* EEPROM command register |
| 1080 |
*/ |
| 1081 |
#define AR5K_EEPROM_CMD 0x6008 /* Register Address */ |
| 1082 |
#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ |
| 1083 |
#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ |
| 1084 |
#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ |
| 1085 |
|
| 1086 |
/* |
| 1087 |
* EEPROM status register |
| 1088 |
*/ |
| 1089 |
#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ |
| 1090 |
#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ |
| 1091 |
#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ |
| 1092 |
AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) |
| 1093 |
#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ |
| 1094 |
#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ |
| 1095 |
#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ |
| 1096 |
#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ |
| 1097 |
|
| 1098 |
/* |
| 1099 |
* EEPROM config register |
| 1100 |
*/ |
| 1101 |
#define AR5K_EEPROM_CFG 0x6010 /* Register Address */ |
| 1102 |
#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ |
| 1103 |
#define AR5K_EEPROM_CFG_SIZE_AUTO 0 |
| 1104 |
#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 |
| 1105 |
#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 |
| 1106 |
#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 |
| 1107 |
#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ |
| 1108 |
#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ |
| 1109 |
#define AR5K_EEPROM_CFG_CLK_RATE_S 3 |
| 1110 |
#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 |
| 1111 |
#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 |
| 1112 |
#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 |
| 1113 |
#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ |
| 1114 |
#define AR5K_EEPROM_CFG_PROT_KEY_S 8 |
| 1115 |
#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ |
| 1116 |
|
| 1117 |
|
| 1118 |
/* |
| 1119 |
* TODO: Wake On Wireless registers |
| 1120 |
* Range 0x7000 - 0x7ce0 |
| 1121 |
*/ |
| 1122 |
|
| 1123 |
/* |
| 1124 |
* Protocol Control Unit (PCU) registers |
| 1125 |
*/ |
| 1126 |
/* |
| 1127 |
* Used for checking initial register writes |
| 1128 |
* during channel reset (see reset func) |
| 1129 |
*/ |
| 1130 |
#define AR5K_PCU_MIN 0x8000 |
| 1131 |
#define AR5K_PCU_MAX 0x8fff |
| 1132 |
|
| 1133 |
/* |
| 1134 |
* First station id register (Lower 32 bits of MAC address) |
| 1135 |
*/ |
| 1136 |
#define AR5K_STA_ID0 0x8000 |
| 1137 |
#define AR5K_STA_ID0_ARRD_L32 0xffffffff |
| 1138 |
|
| 1139 |
/* |
| 1140 |
* Second station id register (Upper 16 bits of MAC address + PCU settings) |
| 1141 |
*/ |
| 1142 |
#define AR5K_STA_ID1 0x8004 /* Register Address */ |
| 1143 |
#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */ |
| 1144 |
#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ |
| 1145 |
#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ |
| 1146 |
#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ |
| 1147 |
#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ |
| 1148 |
#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ |
| 1149 |
#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ |
| 1150 |
#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ |
| 1151 |
#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ |
| 1152 |
AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) |
| 1153 |
#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ |
| 1154 |
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ |
| 1155 |
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ |
| 1156 |
#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */ |
| 1157 |
#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */ |
| 1158 |
#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ |
| 1159 |
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ |
| 1160 |
#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ |
| 1161 |
#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ |
| 1162 |
#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ |
| 1163 |
#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ |
| 1164 |
|
| 1165 |
#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \ |
| 1166 |
AR5K_STA_ID1_DESC_ANTENNA | \ |
| 1167 |
AR5K_STA_ID1_RTS_DEF_ANTENNA | \ |
| 1168 |
AR5K_STA_ID1_SELFGEN_DEF_ANT) |
| 1169 |
|
| 1170 |
/* |
| 1171 |
* First BSSID register (MAC address, lower 32bits) |
| 1172 |
*/ |
| 1173 |
#define AR5K_BSS_ID0 0x8008 |
| 1174 |
|
| 1175 |
/* |
| 1176 |
* Second BSSID register (MAC address in upper 16 bits) |
| 1177 |
* |
| 1178 |
* AID: Association ID |
| 1179 |
*/ |
| 1180 |
#define AR5K_BSS_ID1 0x800c |
| 1181 |
#define AR5K_BSS_ID1_AID 0xffff0000 |
| 1182 |
#define AR5K_BSS_ID1_AID_S 16 |
| 1183 |
|
| 1184 |
/* |
| 1185 |
* Backoff slot time register |
| 1186 |
*/ |
| 1187 |
#define AR5K_SLOT_TIME 0x8010 |
| 1188 |
|
| 1189 |
/* |
| 1190 |
* ACK/CTS timeout register |
| 1191 |
*/ |
| 1192 |
#define AR5K_TIME_OUT 0x8014 /* Register Address */ |
| 1193 |
#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ |
| 1194 |
#define AR5K_TIME_OUT_ACK_S 0 |
| 1195 |
#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ |
| 1196 |
#define AR5K_TIME_OUT_CTS_S 16 |
| 1197 |
|
| 1198 |
/* |
| 1199 |
* RSSI threshold register |
| 1200 |
*/ |
| 1201 |
#define AR5K_RSSI_THR 0x8018 /* Register Address */ |
| 1202 |
#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ |
| 1203 |
#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ |
| 1204 |
#define AR5K_RSSI_THR_BMISS_5210_S 8 |
| 1205 |
#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ |
| 1206 |
#define AR5K_RSSI_THR_BMISS_5211_S 8 |
| 1207 |
#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ |
| 1208 |
AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) |
| 1209 |
#define AR5K_RSSI_THR_BMISS_S 8 |
| 1210 |
|
| 1211 |
/* |
| 1212 |
* 5210 has more PCU registers because there is no QCU/DCU |
| 1213 |
* so queue parameters are set here, this way a lot common |
| 1214 |
* registers have different address for 5210. To make things |
| 1215 |
* easier we define a macro based on ah->ah_version for common |
| 1216 |
* registers with different addresses and common flags. |
| 1217 |
*/ |
| 1218 |
|
| 1219 |
/* |
| 1220 |
* Retry limit register |
| 1221 |
* |
| 1222 |
* Retry limit register for 5210 (no QCU/DCU so it's done in PCU) |
| 1223 |
*/ |
| 1224 |
#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ |
| 1225 |
#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ |
| 1226 |
#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 |
| 1227 |
#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ |
| 1228 |
#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 |
| 1229 |
#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ |
| 1230 |
#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 |
| 1231 |
#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ |
| 1232 |
#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 |
| 1233 |
#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ |
| 1234 |
#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 |
| 1235 |
|
| 1236 |
/* |
| 1237 |
* Transmit latency register |
| 1238 |
*/ |
| 1239 |
#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ |
| 1240 |
#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ |
| 1241 |
#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ |
| 1242 |
AR5K_USEC_5210 : AR5K_USEC_5211) |
| 1243 |
#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ |
| 1244 |
#define AR5K_USEC_1_S 0 |
| 1245 |
#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ |
| 1246 |
#define AR5K_USEC_32_S 7 |
| 1247 |
#define AR5K_USEC_TX_LATENCY_5211 0x007fc000 |
| 1248 |
#define AR5K_USEC_TX_LATENCY_5211_S 14 |
| 1249 |
#define AR5K_USEC_RX_LATENCY_5211 0x1f800000 |
| 1250 |
#define AR5K_USEC_RX_LATENCY_5211_S 23 |
| 1251 |
#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ |
| 1252 |
#define AR5K_USEC_TX_LATENCY_5210_S 14 |
| 1253 |
#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ |
| 1254 |
#define AR5K_USEC_RX_LATENCY_5210_S 20 |
| 1255 |
|
| 1256 |
/* |
| 1257 |
* PCU beacon control register |
| 1258 |
*/ |
| 1259 |
#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ |
| 1260 |
#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ |
| 1261 |
#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ |
| 1262 |
AR5K_BEACON_5210 : AR5K_BEACON_5211) |
| 1263 |
#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ |
| 1264 |
#define AR5K_BEACON_PERIOD_S 0 |
| 1265 |
#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ |
| 1266 |
#define AR5K_BEACON_TIM_S 16 |
| 1267 |
#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ |
| 1268 |
#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ |
| 1269 |
|
| 1270 |
/* |
| 1271 |
* CFP period register |
| 1272 |
*/ |
| 1273 |
#define AR5K_CFP_PERIOD_5210 0x8028 |
| 1274 |
#define AR5K_CFP_PERIOD_5211 0x8024 |
| 1275 |
#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ |
| 1276 |
AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) |
| 1277 |
|
| 1278 |
/* |
| 1279 |
* Next beacon time register |
| 1280 |
*/ |
| 1281 |
#define AR5K_TIMER0_5210 0x802c |
| 1282 |
#define AR5K_TIMER0_5211 0x8028 |
| 1283 |
#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ |
| 1284 |
AR5K_TIMER0_5210 : AR5K_TIMER0_5211) |
| 1285 |
|
| 1286 |
/* |
| 1287 |
* Next DMA beacon alert register |
| 1288 |
*/ |
| 1289 |
#define AR5K_TIMER1_5210 0x8030 |
| 1290 |
#define AR5K_TIMER1_5211 0x802c |
| 1291 |
#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ |
| 1292 |
AR5K_TIMER1_5210 : AR5K_TIMER1_5211) |
| 1293 |
|
| 1294 |
/* |
| 1295 |
* Next software beacon alert register |
| 1296 |
*/ |
| 1297 |
#define AR5K_TIMER2_5210 0x8034 |
| 1298 |
#define AR5K_TIMER2_5211 0x8030 |
| 1299 |
#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ |
| 1300 |
AR5K_TIMER2_5210 : AR5K_TIMER2_5211) |
| 1301 |
|
| 1302 |
/* |
| 1303 |
* Next ATIM window time register |
| 1304 |
*/ |
| 1305 |
#define AR5K_TIMER3_5210 0x8038 |
| 1306 |
#define AR5K_TIMER3_5211 0x8034 |
| 1307 |
#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ |
| 1308 |
AR5K_TIMER3_5210 : AR5K_TIMER3_5211) |
| 1309 |
|
| 1310 |
|
| 1311 |
/* |
| 1312 |
* 5210 First inter frame spacing register (IFS) |
| 1313 |
*/ |
| 1314 |
#define AR5K_IFS0 0x8040 |
| 1315 |
#define AR5K_IFS0_SIFS 0x000007ff |
| 1316 |
#define AR5K_IFS0_SIFS_S 0 |
| 1317 |
#define AR5K_IFS0_DIFS 0x007ff800 |
| 1318 |
#define AR5K_IFS0_DIFS_S 11 |
| 1319 |
|
| 1320 |
/* |
| 1321 |
* 5210 Second inter frame spacing register (IFS) |
| 1322 |
*/ |
| 1323 |
#define AR5K_IFS1 0x8044 |
| 1324 |
#define AR5K_IFS1_PIFS 0x00000fff |
| 1325 |
#define AR5K_IFS1_PIFS_S 0 |
| 1326 |
#define AR5K_IFS1_EIFS 0x03fff000 |
| 1327 |
#define AR5K_IFS1_EIFS_S 12 |
| 1328 |
#define AR5K_IFS1_CS_EN 0x04000000 |
| 1329 |
#define AR5K_IFS1_CS_EN_S 26 |
| 1330 |
|
| 1331 |
/* |
| 1332 |
* CFP duration register |
| 1333 |
*/ |
| 1334 |
#define AR5K_CFP_DUR_5210 0x8048 |
| 1335 |
#define AR5K_CFP_DUR_5211 0x8038 |
| 1336 |
#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ |
| 1337 |
AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) |
| 1338 |
|
| 1339 |
/* |
| 1340 |
* Receive filter register |
| 1341 |
*/ |
| 1342 |
#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ |
| 1343 |
#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ |
| 1344 |
#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ |
| 1345 |
AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) |
| 1346 |
#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ |
| 1347 |
#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ |
| 1348 |
#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ |
| 1349 |
#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ |
| 1350 |
#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ |
| 1351 |
#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ |
| 1352 |
#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ |
| 1353 |
#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ |
| 1354 |
#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ |
| 1355 |
#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ |
| 1356 |
#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ |
| 1357 |
#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ |
| 1358 |
#define AR5K_RX_FILTER_PHYERR \ |
| 1359 |
((ah->ah_version == AR5K_AR5211 ? \ |
| 1360 |
AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) |
| 1361 |
#define AR5K_RX_FILTER_RADARERR \ |
| 1362 |
((ah->ah_version == AR5K_AR5211 ? \ |
| 1363 |
AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) |
| 1364 |
|
| 1365 |
/* |
| 1366 |
* Multicast filter register (lower 32 bits) |
| 1367 |
*/ |
| 1368 |
#define AR5K_MCAST_FILTER0_5210 0x8050 |
| 1369 |
#define AR5K_MCAST_FILTER0_5211 0x8040 |
| 1370 |
#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ |
| 1371 |
AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) |
| 1372 |
|
| 1373 |
/* |
| 1374 |
* Multicast filter register (higher 16 bits) |
| 1375 |
*/ |
| 1376 |
#define AR5K_MCAST_FILTER1_5210 0x8054 |
| 1377 |
#define AR5K_MCAST_FILTER1_5211 0x8044 |
| 1378 |
#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ |
| 1379 |
AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) |
| 1380 |
|
| 1381 |
|
| 1382 |
/* |
| 1383 |
* Transmit mask register (lower 32 bits) [5210] |
| 1384 |
*/ |
| 1385 |
#define AR5K_TX_MASK0 0x8058 |
| 1386 |
|
| 1387 |
/* |
| 1388 |
* Transmit mask register (higher 16 bits) [5210] |
| 1389 |
*/ |
| 1390 |
#define AR5K_TX_MASK1 0x805c |
| 1391 |
|
| 1392 |
/* |
| 1393 |
* Clear transmit mask [5210] |
| 1394 |
*/ |
| 1395 |
#define AR5K_CLR_TMASK 0x8060 |
| 1396 |
|
| 1397 |
/* |
| 1398 |
* Trigger level register (before transmission) [5210] |
| 1399 |
*/ |
| 1400 |
#define AR5K_TRIG_LVL 0x8064 |
| 1401 |
|
| 1402 |
|
| 1403 |
/* |
| 1404 |
* PCU Diagnostic register |
| 1405 |
* |
| 1406 |
* Used for tweaking/diagnostics. |
| 1407 |
*/ |
| 1408 |
#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ |
| 1409 |
#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ |
| 1410 |
#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ |
| 1411 |
AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) |
| 1412 |
#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ |
| 1413 |
#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ |
| 1414 |
#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ |
| 1415 |
#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable HW encryption */ |
| 1416 |
#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable HW decryption */ |
| 1417 |
#define AR5K_DIAG_SW_DIS_TX_5210 0x00000020 /* Disable transmit [5210] */ |
| 1418 |
#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable receive */ |
| 1419 |
#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 |
| 1420 |
#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ |
| 1421 |
AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) |
| 1422 |
#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* TX Data Loopback (i guess it goes with DIS_TX) [5210] */ |
| 1423 |
#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 |
| 1424 |
#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ |
| 1425 |
AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) |
| 1426 |
#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Generate invalid TX FCS */ |
| 1427 |
#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 |
| 1428 |
#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ |
| 1429 |
AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) |
| 1430 |
#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Add 56 bytes of channel info before the frame data in the RX buffer */ |
| 1431 |
#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 |
| 1432 |
#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ |
| 1433 |
AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) |
| 1434 |
#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ |
| 1435 |
#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 |
| 1436 |
#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ |
| 1437 |
AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) |
| 1438 |
#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ |
| 1439 |
#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ |
| 1440 |
#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ |
| 1441 |
#define AR5K_DIAG_SW_SCRAM_SEED_S 10 |
| 1442 |
#define AR5K_DIAG_SW_DIS_SEQ_INC_5210 0x00040000 /* Disable seqnum increment (?)[5210] */ |
| 1443 |
#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 |
| 1444 |
#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ |
| 1445 |
#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ |
| 1446 |
AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) |
| 1447 |
#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ |
| 1448 |
#define AR5K_DIAG_SW_OBSPT_S 18 |
| 1449 |
#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x00100000 /* Ignore carrier sense */ |
| 1450 |
#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x00200000 /* Ignore virtual carrier sense */ |
| 1451 |
#define AR5K_DIAG_SW_CHANNEL_IDLE_HIGH 0x00400000 /* Force channel idle high */ |
| 1452 |
#define AR5K_DIAG_SW_PHEAR_ME 0x00800000 /* ??? */ |
| 1453 |
|
| 1454 |
/* |
| 1455 |
* TSF (clock) register (lower 32 bits) |
| 1456 |
*/ |
| 1457 |
#define AR5K_TSF_L32_5210 0x806c |
| 1458 |
#define AR5K_TSF_L32_5211 0x804c |
| 1459 |
#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ |
| 1460 |
AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) |
| 1461 |
|
| 1462 |
/* |
| 1463 |
* TSF (clock) register (higher 32 bits) |
| 1464 |
*/ |
| 1465 |
#define AR5K_TSF_U32_5210 0x8070 |
| 1466 |
#define AR5K_TSF_U32_5211 0x8050 |
| 1467 |
#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ |
| 1468 |
AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) |
| 1469 |
|
| 1470 |
/* |
| 1471 |
* Last beacon timestamp register (Read Only) |
| 1472 |
*/ |
| 1473 |
#define AR5K_LAST_TSTP 0x8080 |
| 1474 |
|
| 1475 |
/* |
| 1476 |
* ADDAC test register [5211+] |
| 1477 |
*/ |
| 1478 |
#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ |
| 1479 |
#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ |
| 1480 |
#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ |
| 1481 |
#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ |
| 1482 |
#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ |
| 1483 |
#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ |
| 1484 |
#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ |
| 1485 |
#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ |
| 1486 |
#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ |
| 1487 |
#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ |
| 1488 |
#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ |
| 1489 |
#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ |
| 1490 |
|
| 1491 |
/* |
| 1492 |
* Default antenna register [5211+] |
| 1493 |
*/ |
| 1494 |
#define AR5K_DEFAULT_ANTENNA 0x8058 |
| 1495 |
|
| 1496 |
/* |
| 1497 |
* Frame control QoS mask register (?) [5211+] |
| 1498 |
* (FC_QOS_MASK) |
| 1499 |
*/ |
| 1500 |
#define AR5K_FRAME_CTL_QOSM 0x805c |
| 1501 |
|
| 1502 |
/* |
| 1503 |
* Seq mask register (?) [5211+] |
| 1504 |
*/ |
| 1505 |
#define AR5K_SEQ_MASK 0x8060 |
| 1506 |
|
| 1507 |
/* |
| 1508 |
* Retry count register [5210] |
| 1509 |
*/ |
| 1510 |
#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ |
| 1511 |
#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ |
| 1512 |
#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ |
| 1513 |
|
| 1514 |
/* |
| 1515 |
* Back-off status register [5210] |
| 1516 |
*/ |
| 1517 |
#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ |
| 1518 |
#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ |
| 1519 |
#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ |
| 1520 |
|
| 1521 |
|
| 1522 |
|
| 1523 |
/* |
| 1524 |
* NAV register (current) |
| 1525 |
*/ |
| 1526 |
#define AR5K_NAV_5210 0x808c |
| 1527 |
#define AR5K_NAV_5211 0x8084 |
| 1528 |
#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ |
| 1529 |
AR5K_NAV_5210 : AR5K_NAV_5211) |
| 1530 |
|
| 1531 |
/* |
| 1532 |
* MIB counters: |
| 1533 |
* |
| 1534 |
* max value is 0xc000, if this is reached we get a MIB interrupt. |
| 1535 |
* they can be controlled via AR5K_MIBC and are cleared on read. |
| 1536 |
*/ |
| 1537 |
|
| 1538 |
/* |
| 1539 |
* RTS success (MIB counter) |
| 1540 |
*/ |
| 1541 |
#define AR5K_RTS_OK_5210 0x8090 |
| 1542 |
#define AR5K_RTS_OK_5211 0x8088 |
| 1543 |
#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ |
| 1544 |
AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) |
| 1545 |
|
| 1546 |
/* |
| 1547 |
* RTS failure (MIB counter) |
| 1548 |
*/ |
| 1549 |
#define AR5K_RTS_FAIL_5210 0x8094 |
| 1550 |
#define AR5K_RTS_FAIL_5211 0x808c |
| 1551 |
#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| 1552 |
AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) |
| 1553 |
|
| 1554 |
/* |
| 1555 |
* ACK failure (MIB counter) |
| 1556 |
*/ |
| 1557 |
#define AR5K_ACK_FAIL_5210 0x8098 |
| 1558 |
#define AR5K_ACK_FAIL_5211 0x8090 |
| 1559 |
#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| 1560 |
AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) |
| 1561 |
|
| 1562 |
/* |
| 1563 |
* FCS failure (MIB counter) |
| 1564 |
*/ |
| 1565 |
#define AR5K_FCS_FAIL_5210 0x809c |
| 1566 |
#define AR5K_FCS_FAIL_5211 0x8094 |
| 1567 |
#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| 1568 |
AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) |
| 1569 |
|
| 1570 |
/* |
| 1571 |
* Beacon count register |
| 1572 |
*/ |
| 1573 |
#define AR5K_BEACON_CNT_5210 0x80a0 |
| 1574 |
#define AR5K_BEACON_CNT_5211 0x8098 |
| 1575 |
#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ |
| 1576 |
AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) |
| 1577 |
|
| 1578 |
|
| 1579 |
/*===5212 Specific PCU registers===*/ |
| 1580 |
|
| 1581 |
/* |
| 1582 |
* Transmit power control register |
| 1583 |
*/ |
| 1584 |
#define AR5K_TPC 0x80e8 |
| 1585 |
#define AR5K_TPC_ACK 0x0000003f /* ack frames */ |
| 1586 |
#define AR5K_TPC_ACK_S 0 |
| 1587 |
#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ |
| 1588 |
#define AR5K_TPC_CTS_S 8 |
| 1589 |
#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ |
| 1590 |
#define AR5K_TPC_CHIRP_S 16 |
| 1591 |
#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ |
| 1592 |
#define AR5K_TPC_DOPPLER_S 24 |
| 1593 |
|
| 1594 |
/* |
| 1595 |
* XR (eXtended Range) mode register |
| 1596 |
*/ |
| 1597 |
#define AR5K_XRMODE 0x80c0 /* Register Address */ |
| 1598 |
#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ |
| 1599 |
#define AR5K_XRMODE_POLL_TYPE_S 0 |
| 1600 |
#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ |
| 1601 |
#define AR5K_XRMODE_POLL_SUBTYPE_S 2 |
| 1602 |
#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ |
| 1603 |
#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ |
| 1604 |
#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ |
| 1605 |
#define AR5K_XRMODE_FRAME_HOLD_S 20 |
| 1606 |
|
| 1607 |
/* |
| 1608 |
* XR delay register |
| 1609 |
*/ |
| 1610 |
#define AR5K_XRDELAY 0x80c4 /* Register Address */ |
| 1611 |
#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ |
| 1612 |
#define AR5K_XRDELAY_SLOT_DELAY_S 0 |
| 1613 |
#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ |
| 1614 |
#define AR5K_XRDELAY_CHIRP_DELAY_S 16 |
| 1615 |
|
| 1616 |
/* |
| 1617 |
* XR timeout register |
| 1618 |
*/ |
| 1619 |
#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ |
| 1620 |
#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ |
| 1621 |
#define AR5K_XRTIMEOUT_CHIRP_S 0 |
| 1622 |
#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ |
| 1623 |
#define AR5K_XRTIMEOUT_POLL_S 16 |
| 1624 |
|
| 1625 |
/* |
| 1626 |
* XR chirp register |
| 1627 |
*/ |
| 1628 |
#define AR5K_XRCHIRP 0x80cc /* Register Address */ |
| 1629 |
#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ |
| 1630 |
#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ |
| 1631 |
|
| 1632 |
/* |
| 1633 |
* XR stomp register |
| 1634 |
*/ |
| 1635 |
#define AR5K_XRSTOMP 0x80d0 /* Register Address */ |
| 1636 |
#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ |
| 1637 |
#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ |
| 1638 |
#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ |
| 1639 |
#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ |
| 1640 |
#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ |
| 1641 |
#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ |
| 1642 |
|
| 1643 |
/* |
| 1644 |
* First enhanced sleep register |
| 1645 |
*/ |
| 1646 |
#define AR5K_SLEEP0 0x80d4 /* Register Address */ |
| 1647 |
#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ |
| 1648 |
#define AR5K_SLEEP0_NEXT_DTIM_S 0 |
| 1649 |
#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ |
| 1650 |
#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ |
| 1651 |
#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ |
| 1652 |
#define AR5K_SLEEP0_CABTO_S 24 |
| 1653 |
|
| 1654 |
/* |
| 1655 |
* Second enhanced sleep register |
| 1656 |
*/ |
| 1657 |
#define AR5K_SLEEP1 0x80d8 /* Register Address */ |
| 1658 |
#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ |
| 1659 |
#define AR5K_SLEEP1_NEXT_TIM_S 0 |
| 1660 |
#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ |
| 1661 |
#define AR5K_SLEEP1_BEACON_TO_S 24 |
| 1662 |
|
| 1663 |
/* |
| 1664 |
* Third enhanced sleep register |
| 1665 |
*/ |
| 1666 |
#define AR5K_SLEEP2 0x80dc /* Register Address */ |
| 1667 |
#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ |
| 1668 |
#define AR5K_SLEEP2_TIM_PER_S 0 |
| 1669 |
#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ |
| 1670 |
#define AR5K_SLEEP2_DTIM_PER_S 16 |
| 1671 |
|
| 1672 |
/* |
| 1673 |
* TX power control (TPC) register |
| 1674 |
* |
| 1675 |
* XXX: PCDAC steps (0.5dBm) or dBm ? |
| 1676 |
* |
| 1677 |
*/ |
| 1678 |
#define AR5K_TXPC 0x80e8 /* Register Address */ |
| 1679 |
#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ |
| 1680 |
#define AR5K_TXPC_ACK_S 0 |
| 1681 |
#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ |
| 1682 |
#define AR5K_TXPC_CTS_S 8 |
| 1683 |
#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ |
| 1684 |
#define AR5K_TXPC_CHIRP_S 16 |
| 1685 |
#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ |
| 1686 |
#define AR5K_TXPC_DOPPLER_S 24 |
| 1687 |
|
| 1688 |
/* |
| 1689 |
* Profile count registers |
| 1690 |
* |
| 1691 |
* These registers can be cleared and frozen with ATH5K_MIBC, but they do not |
| 1692 |
* generate a MIB interrupt. |
| 1693 |
* Instead of overflowing, they shift by one bit to the right. All registers |
| 1694 |
* shift together, i.e. when one reaches the max, all shift at the same time by |
| 1695 |
* one bit to the right. This way we should always get consistent values. |
| 1696 |
*/ |
| 1697 |
#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ |
| 1698 |
#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ |
| 1699 |
#define AR5K_PROFCNT_RXCLR 0x80f4 /* Busy count */ |
| 1700 |
#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle counter */ |
| 1701 |
|
| 1702 |
/* |
| 1703 |
* Quiet period control registers |
| 1704 |
*/ |
| 1705 |
#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ |
| 1706 |
#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ |
| 1707 |
#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 |
| 1708 |
#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ |
| 1709 |
#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ |
| 1710 |
|
| 1711 |
#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ |
| 1712 |
#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ |
| 1713 |
#define AR5K_QUIET_CTL2_QT_PER_S 0 |
| 1714 |
#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ |
| 1715 |
#define AR5K_QUIET_CTL2_QT_DUR_S 16 |
| 1716 |
|
| 1717 |
/* |
| 1718 |
* TSF parameter register |
| 1719 |
*/ |
| 1720 |
#define AR5K_TSF_PARM 0x8104 /* Register Address */ |
| 1721 |
#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ |
| 1722 |
#define AR5K_TSF_PARM_INC_S 0 |
| 1723 |
|
| 1724 |
/* |
| 1725 |
* QoS NOACK policy |
| 1726 |
*/ |
| 1727 |
#define AR5K_QOS_NOACK 0x8108 /* Register Address */ |
| 1728 |
#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ |
| 1729 |
#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 |
| 1730 |
#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ |
| 1731 |
#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 |
| 1732 |
#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ |
| 1733 |
#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 |
| 1734 |
|
| 1735 |
/* |
| 1736 |
* PHY error filter register |
| 1737 |
*/ |
| 1738 |
#define AR5K_PHY_ERR_FIL 0x810c |
| 1739 |
#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ |
| 1740 |
#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ |
| 1741 |
#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ |
| 1742 |
|
| 1743 |
/* |
| 1744 |
* XR latency register |
| 1745 |
*/ |
| 1746 |
#define AR5K_XRLAT_TX 0x8110 |
| 1747 |
|
| 1748 |
/* |
| 1749 |
* ACK SIFS register |
| 1750 |
*/ |
| 1751 |
#define AR5K_ACKSIFS 0x8114 /* Register Address */ |
| 1752 |
#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ |
| 1753 |
|
| 1754 |
/* |
| 1755 |
* MIC QoS control register (?) |
| 1756 |
*/ |
| 1757 |
#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ |
| 1758 |
#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) |
| 1759 |
#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ |
| 1760 |
|
| 1761 |
/* |
| 1762 |
* MIC QoS select register (?) |
| 1763 |
*/ |
| 1764 |
#define AR5K_MIC_QOS_SEL 0x811c |
| 1765 |
#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) |
| 1766 |
|
| 1767 |
/* |
| 1768 |
* Misc mode control register (?) |
| 1769 |
*/ |
| 1770 |
#define AR5K_MISC_MODE 0x8120 /* Register Address */ |
| 1771 |
#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ |
| 1772 |
#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ |
| 1773 |
#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ |
| 1774 |
/* more bits */ |
| 1775 |
|
| 1776 |
/* |
| 1777 |
* OFDM Filter counter |
| 1778 |
*/ |
| 1779 |
#define AR5K_OFDM_FIL_CNT 0x8124 |
| 1780 |
|
| 1781 |
/* |
| 1782 |
* CCK Filter counter |
| 1783 |
*/ |
| 1784 |
#define AR5K_CCK_FIL_CNT 0x8128 |
| 1785 |
|
| 1786 |
/* |
| 1787 |
* PHY Error Counters (same masks as AR5K_PHY_ERR_FIL) |
| 1788 |
*/ |
| 1789 |
#define AR5K_PHYERR_CNT1 0x812c |
| 1790 |
#define AR5K_PHYERR_CNT1_MASK 0x8130 |
| 1791 |
|
| 1792 |
#define AR5K_PHYERR_CNT2 0x8134 |
| 1793 |
#define AR5K_PHYERR_CNT2_MASK 0x8138 |
| 1794 |
|
| 1795 |
/* if the PHY Error Counters reach this maximum, we get MIB interrupts */ |
| 1796 |
#define ATH5K_PHYERR_CNT_MAX 0x00c00000 |
| 1797 |
|
| 1798 |
/* |
| 1799 |
* TSF Threshold register (?) |
| 1800 |
*/ |
| 1801 |
#define AR5K_TSF_THRES 0x813c |
| 1802 |
|
| 1803 |
/* |
| 1804 |
* TODO: Wake On Wireless registers |
| 1805 |
* Range: 0x8147 - 0x818c |
| 1806 |
*/ |
| 1807 |
|
| 1808 |
/* |
| 1809 |
* Rate -> ACK SIFS mapping table (32 entries) |
| 1810 |
*/ |
| 1811 |
#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ |
| 1812 |
#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) |
| 1813 |
#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ |
| 1814 |
#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ |
| 1815 |
|
| 1816 |
/* |
| 1817 |
* Rate -> duration mapping table (32 entries) |
| 1818 |
*/ |
| 1819 |
#define AR5K_RATE_DUR_BASE 0x8700 |
| 1820 |
#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) |
| 1821 |
|
| 1822 |
/* |
| 1823 |
* Rate -> db mapping table |
| 1824 |
* (8 entries, each one has 4 8bit fields) |
| 1825 |
*/ |
| 1826 |
#define AR5K_RATE2DB_BASE 0x87c0 |
| 1827 |
#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) |
| 1828 |
|
| 1829 |
/* |
| 1830 |
* db -> Rate mapping table |
| 1831 |
* (8 entries, each one has 4 8bit fields) |
| 1832 |
*/ |
| 1833 |
#define AR5K_DB2RATE_BASE 0x87e0 |
| 1834 |
#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) |
| 1835 |
|
| 1836 |
/*===5212 end===*/ |
| 1837 |
|
| 1838 |
#define AR5K_KEYTABLE_SIZE_5210 64 |
| 1839 |
#define AR5K_KEYTABLE_SIZE_5211 128 |
| 1840 |
|
| 1841 |
/*===PHY REGISTERS===*/ |
| 1842 |
|
| 1843 |
/* |
| 1844 |
* PHY registers start |
| 1845 |
*/ |
| 1846 |
#define AR5K_PHY_BASE 0x9800 |
| 1847 |
#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) |
| 1848 |
|
| 1849 |
/* |
| 1850 |
* TST_2 (Misc config parameters) |
| 1851 |
*/ |
| 1852 |
#define AR5K_PHY_TST2 0x9800 /* Register Address */ |
| 1853 |
#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ |
| 1854 |
#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ |
| 1855 |
#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ |
| 1856 |
#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ |
| 1857 |
#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ |
| 1858 |
#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ |
| 1859 |
#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ |
| 1860 |
#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ |
| 1861 |
#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ |
| 1862 |
#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ |
| 1863 |
#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ |
| 1864 |
#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ |
| 1865 |
#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ |
| 1866 |
#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ |
| 1867 |
#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ |
| 1868 |
#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ |
| 1869 |
#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ |
| 1870 |
#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ |
| 1871 |
|
| 1872 |
/* |
| 1873 |
* PHY frame control register [5110] /turbo mode register [5111+] |
| 1874 |
* |
| 1875 |
* There is another frame control register for [5111+] |
| 1876 |
* at address 0x9944 (see below) but the 2 first flags |
| 1877 |
* are common here between 5110 frame control register |
| 1878 |
* and [5111+] turbo mode register, so this also works as |
| 1879 |
* a "turbo mode register" for 5110. We treat this one as |
| 1880 |
* a frame control register for 5110 below. |
| 1881 |
*/ |
| 1882 |
#define AR5K_PHY_TURBO 0x9804 /* Register Address */ |
| 1883 |
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ |
| 1884 |
#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ |
| 1885 |
#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */ |
| 1886 |
|
| 1887 |
/* |
| 1888 |
* PHY agility command register |
| 1889 |
* (aka TST_1) |
| 1890 |
*/ |
| 1891 |
#define AR5K_PHY_AGC 0x9808 /* Register Address */ |
| 1892 |
#define AR5K_PHY_TST1 0x9808 |
| 1893 |
#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ |
| 1894 |
#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ |
| 1895 |
#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ |
| 1896 |
#define AR5K_PHY_TST1_TXSRC_SRC_S 1 |
| 1897 |
#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ |
| 1898 |
#define AR5K_PHY_TST1_TXSRC_ALT_S 7 |
| 1899 |
|
| 1900 |
|
| 1901 |
/* |
| 1902 |
* PHY timing register 3 [5112+] |
| 1903 |
*/ |
| 1904 |
#define AR5K_PHY_TIMING_3 0x9814 |
| 1905 |
#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 |
| 1906 |
#define AR5K_PHY_TIMING_3_DSC_MAN_S 17 |
| 1907 |
#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 |
| 1908 |
#define AR5K_PHY_TIMING_3_DSC_EXP_S 13 |
| 1909 |
|
| 1910 |
/* |
| 1911 |
* PHY chip revision register |
| 1912 |
*/ |
| 1913 |
#define AR5K_PHY_CHIP_ID 0x9818 |
| 1914 |
|
| 1915 |
/* |
| 1916 |
* PHY activation register |
| 1917 |
*/ |
| 1918 |
#define AR5K_PHY_ACT 0x981c /* Register Address */ |
| 1919 |
#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ |
| 1920 |
#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ |
| 1921 |
|
| 1922 |
/* |
| 1923 |
* PHY RF control registers |
| 1924 |
*/ |
| 1925 |
#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ |
| 1926 |
#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ |
| 1927 |
#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 |
| 1928 |
|
| 1929 |
#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ |
| 1930 |
#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ |
| 1931 |
#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 |
| 1932 |
|
| 1933 |
#define AR5K_PHY_ADC_CTL 0x982c |
| 1934 |
#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 |
| 1935 |
#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 |
| 1936 |
#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 |
| 1937 |
#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 |
| 1938 |
#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 |
| 1939 |
#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 |
| 1940 |
#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 |
| 1941 |
|
| 1942 |
#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ |
| 1943 |
#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ |
| 1944 |
#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ |
| 1945 |
#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ |
| 1946 |
#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ |
| 1947 |
|
| 1948 |
/* |
| 1949 |
* Pre-Amplifier control register |
| 1950 |
* (XPA -> external pre-amplifier) |
| 1951 |
*/ |
| 1952 |
#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ |
| 1953 |
#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ |
| 1954 |
#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ |
| 1955 |
#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ |
| 1956 |
#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ |
| 1957 |
|
| 1958 |
/* |
| 1959 |
* PHY settling register |
| 1960 |
*/ |
| 1961 |
#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ |
| 1962 |
#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ |
| 1963 |
#define AR5K_PHY_SETTLING_AGC_S 0 |
| 1964 |
#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settling time */ |
| 1965 |
#define AR5K_PHY_SETTLING_SWITCH_S 7 |
| 1966 |
|
| 1967 |
/* |
| 1968 |
* PHY Gain registers |
| 1969 |
*/ |
| 1970 |
#define AR5K_PHY_GAIN 0x9848 /* Register Address */ |
| 1971 |
#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ |
| 1972 |
#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 |
| 1973 |
#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 |
| 1974 |
#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 |
| 1975 |
|
| 1976 |
#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ |
| 1977 |
#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ |
| 1978 |
|
| 1979 |
/* |
| 1980 |
* Desired ADC/PGA size register |
| 1981 |
* (for more infos read ANI patent) |
| 1982 |
*/ |
| 1983 |
#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ |
| 1984 |
#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ |
| 1985 |
#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 |
| 1986 |
#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ |
| 1987 |
#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 |
| 1988 |
#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ |
| 1989 |
#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 |
| 1990 |
|
| 1991 |
/* |
| 1992 |
* PHY signal register |
| 1993 |
* (for more infos read ANI patent) |
| 1994 |
*/ |
| 1995 |
#define AR5K_PHY_SIG 0x9858 /* Register Address */ |
| 1996 |
#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ |
| 1997 |
#define AR5K_PHY_SIG_FIRSTEP_S 12 |
| 1998 |
#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ |
| 1999 |
#define AR5K_PHY_SIG_FIRPWR_S 18 |
| 2000 |
|
| 2001 |
/* |
| 2002 |
* PHY coarse agility control register |
| 2003 |
* (for more infos read ANI patent) |
| 2004 |
*/ |
| 2005 |
#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ |
| 2006 |
#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ |
| 2007 |
#define AR5K_PHY_AGCCOARSE_LO_S 7 |
| 2008 |
#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ |
| 2009 |
#define AR5K_PHY_AGCCOARSE_HI_S 15 |
| 2010 |
|
| 2011 |
/* |
| 2012 |
* PHY agility control register |
| 2013 |
*/ |
| 2014 |
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */ |
| 2015 |
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ |
| 2016 |
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ |
| 2017 |
#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ |
| 2018 |
#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ |
| 2019 |
#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ |
| 2020 |
#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ |
| 2021 |
|
| 2022 |
/* |
| 2023 |
* PHY noise floor status register (CCA = Clear Channel Assessment) |
| 2024 |
*/ |
| 2025 |
#define AR5K_PHY_NF 0x9864 /* Register address */ |
| 2026 |
#define AR5K_PHY_NF_M 0x000001ff /* Noise floor, written to hardware in 1/2 dBm units */ |
| 2027 |
#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) |
| 2028 |
#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ |
| 2029 |
#define AR5K_PHY_NF_THRESH62_S 12 |
| 2030 |
#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* Minimum measured noise level, read from hardware in 1 dBm units */ |
| 2031 |
#define AR5K_PHY_NF_MINCCA_PWR_S 19 |
| 2032 |
|
| 2033 |
/* |
| 2034 |
* PHY ADC saturation register [5110] |
| 2035 |
*/ |
| 2036 |
#define AR5K_PHY_ADCSAT 0x9868 |
| 2037 |
#define AR5K_PHY_ADCSAT_ICNT 0x0001f800 |
| 2038 |
#define AR5K_PHY_ADCSAT_ICNT_S 11 |
| 2039 |
#define AR5K_PHY_ADCSAT_THR 0x000007e0 |
| 2040 |
#define AR5K_PHY_ADCSAT_THR_S 5 |
| 2041 |
|
| 2042 |
/* |
| 2043 |
* PHY Weak ofdm signal detection threshold registers (ANI) [5212+] |
| 2044 |
*/ |
| 2045 |
|
| 2046 |
/* High thresholds */ |
| 2047 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 |
| 2048 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f |
| 2049 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 |
| 2050 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 |
| 2051 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 |
| 2052 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 |
| 2053 |
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 |
| 2054 |
|
| 2055 |
/* Low thresholds */ |
| 2056 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c |
| 2057 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 |
| 2058 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 |
| 2059 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 |
| 2060 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 |
| 2061 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 |
| 2062 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 |
| 2063 |
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 |
| 2064 |
|
| 2065 |
|
| 2066 |
/* |
| 2067 |
* PHY sleep registers [5112+] |
| 2068 |
*/ |
| 2069 |
#define AR5K_PHY_SCR 0x9870 |
| 2070 |
|
| 2071 |
#define AR5K_PHY_SLMT 0x9874 |
| 2072 |
#define AR5K_PHY_SLMT_32MHZ 0x0000007f |
| 2073 |
|
| 2074 |
#define AR5K_PHY_SCAL 0x9878 |
| 2075 |
#define AR5K_PHY_SCAL_32MHZ 0x0000000e |
| 2076 |
#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 |
| 2077 |
#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a |
| 2078 |
#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 |
| 2079 |
|
| 2080 |
/* |
| 2081 |
* PHY PLL (Phase Locked Loop) control register |
| 2082 |
*/ |
| 2083 |
#define AR5K_PHY_PLL 0x987c |
| 2084 |
#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ |
| 2085 |
/* 40MHz -> 5GHz band */ |
| 2086 |
#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 |
| 2087 |
#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa |
| 2088 |
#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 |
| 2089 |
#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ |
| 2090 |
AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) |
| 2091 |
/* 44MHz -> 2.4GHz band */ |
| 2092 |
#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 |
| 2093 |
#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab |
| 2094 |
#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ |
| 2095 |
AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) |
| 2096 |
|
| 2097 |
#define AR5K_PHY_PLL_RF5111 0x00000000 |
| 2098 |
#define AR5K_PHY_PLL_RF5112 0x00000040 |
| 2099 |
#define AR5K_PHY_PLL_HALF_RATE 0x00000100 |
| 2100 |
#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 |
| 2101 |
|
| 2102 |
/* |
| 2103 |
* RF Buffer register |
| 2104 |
* |
| 2105 |
* It's obvious from the code that 0x989c is the buffer register but |
| 2106 |
* for the other special registers that we write to after sending each |
| 2107 |
* packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers |
| 2108 |
* for now. It's interesting that they are also used for some other operations. |
| 2109 |
*/ |
| 2110 |
|
| 2111 |
#define AR5K_RF_BUFFER 0x989c |
| 2112 |
#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ |
| 2113 |
#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ |
| 2114 |
#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ |
| 2115 |
|
| 2116 |
#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ |
| 2117 |
/* Channel set on 5111 */ |
| 2118 |
/* Used to read radio revision*/ |
| 2119 |
|
| 2120 |
#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ |
| 2121 |
/* Bank 0,1,2,6 on 5111 */ |
| 2122 |
/* Bank 1 on 5112 */ |
| 2123 |
/* Used during activation on 5111 */ |
| 2124 |
|
| 2125 |
#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ |
| 2126 |
/* Used during activation on 5111 */ |
| 2127 |
/* Channel on 5112 */ |
| 2128 |
/* Bank 6 on 5112 */ |
| 2129 |
|
| 2130 |
#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ |
| 2131 |
|
| 2132 |
/* |
| 2133 |
* PHY RF stage register [5210] |
| 2134 |
*/ |
| 2135 |
#define AR5K_PHY_RFSTG 0x98d4 |
| 2136 |
#define AR5K_PHY_RFSTG_DISABLE 0x00000021 |
| 2137 |
|
| 2138 |
/* |
| 2139 |
* BIN masks (?) |
| 2140 |
*/ |
| 2141 |
#define AR5K_PHY_BIN_MASK_1 0x9900 |
| 2142 |
#define AR5K_PHY_BIN_MASK_2 0x9904 |
| 2143 |
#define AR5K_PHY_BIN_MASK_3 0x9908 |
| 2144 |
|
| 2145 |
#define AR5K_PHY_BIN_MASK_CTL 0x990c |
| 2146 |
#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff |
| 2147 |
#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 |
| 2148 |
#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 |
| 2149 |
#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 |
| 2150 |
|
| 2151 |
/* |
| 2152 |
* PHY Antenna control register |
| 2153 |
*/ |
| 2154 |
#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ |
| 2155 |
#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ |
| 2156 |
#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ |
| 2157 |
#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ |
| 2158 |
#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ |
| 2159 |
#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 |
| 2160 |
|
| 2161 |
/* |
| 2162 |
* PHY receiver delay register [5111+] |
| 2163 |
*/ |
| 2164 |
#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ |
| 2165 |
#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ |
| 2166 |
|
| 2167 |
/* |
| 2168 |
* PHY max rx length register (?) [5111] |
| 2169 |
*/ |
| 2170 |
#define AR5K_PHY_MAX_RX_LEN 0x991c |
| 2171 |
|
| 2172 |
/* |
| 2173 |
* PHY timing register 4 |
| 2174 |
* I(nphase)/Q(adrature) calibration register [5111+] |
| 2175 |
*/ |
| 2176 |
#define AR5K_PHY_IQ 0x9920 /* Register Address */ |
| 2177 |
#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ |
| 2178 |
#define AR5K_PHY_IQ_CORR_Q_Q_COFF_S 0 |
| 2179 |
#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ |
| 2180 |
#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 |
| 2181 |
#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ |
| 2182 |
#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ |
| 2183 |
#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 |
| 2184 |
#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ |
| 2185 |
#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ |
| 2186 |
#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ |
| 2187 |
#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ |
| 2188 |
#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ |
| 2189 |
#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ |
| 2190 |
#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ |
| 2191 |
|
| 2192 |
/* |
| 2193 |
* PHY timing register 5 |
| 2194 |
* OFDM Self-correlator Cyclic RSSI threshold params |
| 2195 |
* (Check out bb_cycpwr_thr1 on ANI patent) |
| 2196 |
*/ |
| 2197 |
#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ |
| 2198 |
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ |
| 2199 |
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ |
| 2200 |
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 |
| 2201 |
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ |
| 2202 |
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ |
| 2203 |
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ |
| 2204 |
#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ |
| 2205 |
|
| 2206 |
/* |
| 2207 |
* PHY-only warm reset register |
| 2208 |
*/ |
| 2209 |
#define AR5K_PHY_WARM_RESET 0x9928 |
| 2210 |
|
| 2211 |
/* |
| 2212 |
* PHY-only control register |
| 2213 |
*/ |
| 2214 |
#define AR5K_PHY_CTL 0x992c /* Register Address */ |
| 2215 |
#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ |
| 2216 |
#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ |
| 2217 |
#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ |
| 2218 |
#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ |
| 2219 |
#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ |
| 2220 |
#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ |
| 2221 |
#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ |
| 2222 |
#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ |
| 2223 |
|
| 2224 |
/* |
| 2225 |
* PHY PAPD probe register [5111+] |
| 2226 |
*/ |
| 2227 |
#define AR5K_PHY_PAPD_PROBE 0x9930 |
| 2228 |
#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 |
| 2229 |
#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 |
| 2230 |
#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 |
| 2231 |
#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 |
| 2232 |
#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 |
| 2233 |
#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 |
| 2234 |
#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 |
| 2235 |
#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ |
| 2236 |
#define AR5K_PHY_PAPD_PROBE_TYPE_S 23 |
| 2237 |
#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 |
| 2238 |
#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 |
| 2239 |
#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 |
| 2240 |
#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 |
| 2241 |
#define AR5K_PHY_PAPD_PROBE_GAINF_S 25 |
| 2242 |
#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ |
| 2243 |
#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ |
| 2244 |
|
| 2245 |
/* |
| 2246 |
* PHY TX rate power registers [5112+] |
| 2247 |
*/ |
| 2248 |
#define AR5K_PHY_TXPOWER_RATE1 0x9934 |
| 2249 |
#define AR5K_PHY_TXPOWER_RATE2 0x9938 |
| 2250 |
#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c |
| 2251 |
#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 |
| 2252 |
#define AR5K_PHY_TXPOWER_RATE3 0xa234 |
| 2253 |
#define AR5K_PHY_TXPOWER_RATE4 0xa238 |
| 2254 |
|
| 2255 |
/* |
| 2256 |
* PHY frame control register [5111+] |
| 2257 |
*/ |
| 2258 |
#define AR5K_PHY_FRAME_CTL_5210 0x9804 |
| 2259 |
#define AR5K_PHY_FRAME_CTL_5211 0x9944 |
| 2260 |
#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ |
| 2261 |
AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) |
| 2262 |
/*---[5111+]---*/ |
| 2263 |
#define AR5K_PHY_FRAME_CTL_WIN_LEN 0x00000003 /* Force window length (?) */ |
| 2264 |
#define AR5K_PHY_FRAME_CTL_WIN_LEN_S 0 |
| 2265 |
#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ |
| 2266 |
#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 |
| 2267 |
#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ |
| 2268 |
#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 |
| 2269 |
#define AR5K_PHY_FRAME_CTL_EMU_S 31 |
| 2270 |
/*---[5110/5111]---*/ |
| 2271 |
#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ |
| 2272 |
#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ |
| 2273 |
#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ |
| 2274 |
#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ |
| 2275 |
#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 |
| 2276 |
#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ |
| 2277 |
#define AR5K_PHY_FRAME_CTL_INI \ |
| 2278 |
(AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ |
| 2279 |
AR5K_PHY_FRAME_CTL_TXURN_ERR | \ |
| 2280 |
AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ |
| 2281 |
AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ |
| 2282 |
AR5K_PHY_FRAME_CTL_PARITY_ERR | \ |
| 2283 |
AR5K_PHY_FRAME_CTL_TIMING_ERR) |
| 2284 |
|
| 2285 |
/* |
| 2286 |
* PHY Tx Power adjustment register [5212A+] |
| 2287 |
*/ |
| 2288 |
#define AR5K_PHY_TX_PWR_ADJ 0x994c |
| 2289 |
#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 |
| 2290 |
#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 |
| 2291 |
#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 |
| 2292 |
#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 |
| 2293 |
|
| 2294 |
/* |
| 2295 |
* PHY radar detection register [5111+] |
| 2296 |
*/ |
| 2297 |
#define AR5K_PHY_RADAR 0x9954 |
| 2298 |
#define AR5K_PHY_RADAR_ENABLE 0x00000001 |
| 2299 |
#define AR5K_PHY_RADAR_DISABLE 0x00000000 |
| 2300 |
#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold |
| 2301 |
5-bits, units unknown {0..31} |
| 2302 |
(? MHz ?) */ |
| 2303 |
#define AR5K_PHY_RADAR_INBANDTHR_S 1 |
| 2304 |
|
| 2305 |
#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold |
| 2306 |
6-bits, dBm range {0..63} |
| 2307 |
in dBm units. */ |
| 2308 |
#define AR5K_PHY_RADAR_PRSSI_THR_S 6 |
| 2309 |
|
| 2310 |
#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold |
| 2311 |
6-bits, dBm range {0..63} |
| 2312 |
in dBm units. */ |
| 2313 |
#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 |
| 2314 |
|
| 2315 |
#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. |
| 2316 |
6-bits, dBm range {0..63} |
| 2317 |
in dBm units. */ |
| 2318 |
#define AR5K_PHY_RADAR_RSSI_THR_S 18 |
| 2319 |
|
| 2320 |
#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response |
| 2321 |
filter power out threshold. |
| 2322 |
7-bits, standard power range |
| 2323 |
{0..127} in 1/2 dBm units. */ |
| 2324 |
#define AR5K_PHY_RADAR_FIRPWR_THRS 24 |
| 2325 |
|
| 2326 |
/* |
| 2327 |
* PHY antenna switch table registers |
| 2328 |
*/ |
| 2329 |
#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 |
| 2330 |
#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 |
| 2331 |
|
| 2332 |
/* |
| 2333 |
* PHY Noise floor threshold |
| 2334 |
*/ |
| 2335 |
#define AR5K_PHY_NFTHRES 0x9968 |
| 2336 |
|
| 2337 |
/* |
| 2338 |
* Sigma Delta register (?) [5213] |
| 2339 |
*/ |
| 2340 |
#define AR5K_PHY_SIGMA_DELTA 0x996C |
| 2341 |
#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 |
| 2342 |
#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 |
| 2343 |
#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 |
| 2344 |
#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 |
| 2345 |
#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 |
| 2346 |
#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 |
| 2347 |
#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 |
| 2348 |
#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 |
| 2349 |
|
| 2350 |
/* |
| 2351 |
* RF restart register [5112+] (?) |
| 2352 |
*/ |
| 2353 |
#define AR5K_PHY_RESTART 0x9970 /* restart */ |
| 2354 |
#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ |
| 2355 |
#define AR5K_PHY_RESTART_DIV_GC_S 18 |
| 2356 |
|
| 2357 |
/* |
| 2358 |
* RF Bus access request register (for synth-only channel switching) |
| 2359 |
*/ |
| 2360 |
#define AR5K_PHY_RFBUS_REQ 0x997C |
| 2361 |
#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 |
| 2362 |
|
| 2363 |
/* |
| 2364 |
* Spur mitigation masks (?) |
| 2365 |
*/ |
| 2366 |
#define AR5K_PHY_TIMING_7 0x9980 |
| 2367 |
#define AR5K_PHY_TIMING_8 0x9984 |
| 2368 |
#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff |
| 2369 |
#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 |
| 2370 |
|
| 2371 |
#define AR5K_PHY_BIN_MASK2_1 0x9988 |
| 2372 |
#define AR5K_PHY_BIN_MASK2_2 0x998c |
| 2373 |
#define AR5K_PHY_BIN_MASK2_3 0x9990 |
| 2374 |
|
| 2375 |
#define AR5K_PHY_BIN_MASK2_4 0x9994 |
| 2376 |
#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff |
| 2377 |
#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 |
| 2378 |
|
| 2379 |
#define AR5K_PHY_TIMING_9 0x9998 |
| 2380 |
#define AR5K_PHY_TIMING_10 0x999c |
| 2381 |
#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff |
| 2382 |
#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 |
| 2383 |
|
| 2384 |
/* |
| 2385 |
* Spur mitigation control |
| 2386 |
*/ |
| 2387 |
#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ |
| 2388 |
#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ |
| 2389 |
#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 |
| 2390 |
#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ |
| 2391 |
#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 |
| 2392 |
#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ |
| 2393 |
#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ |
| 2394 |
|
| 2395 |
/* |
| 2396 |
* Gain tables |
| 2397 |
*/ |
| 2398 |
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ |
| 2399 |
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) |
| 2400 |
#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ |
| 2401 |
#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) |
| 2402 |
|
| 2403 |
/* |
| 2404 |
* PHY timing IQ calibration result register [5111+] |
| 2405 |
*/ |
| 2406 |
#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ |
| 2407 |
#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ |
| 2408 |
#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ |
| 2409 |
|
| 2410 |
/* |
| 2411 |
* PHY current RSSI register [5111+] |
| 2412 |
*/ |
| 2413 |
#define AR5K_PHY_CURRENT_RSSI 0x9c1c |
| 2414 |
|
| 2415 |
/* |
| 2416 |
* PHY RF Bus grant register |
| 2417 |
*/ |
| 2418 |
#define AR5K_PHY_RFBUS_GRANT 0x9c20 |
| 2419 |
#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 |
| 2420 |
|
| 2421 |
/* |
| 2422 |
* PHY ADC test register |
| 2423 |
*/ |
| 2424 |
#define AR5K_PHY_ADC_TEST 0x9c24 |
| 2425 |
#define AR5K_PHY_ADC_TEST_I 0x00000001 |
| 2426 |
#define AR5K_PHY_ADC_TEST_Q 0x00000200 |
| 2427 |
|
| 2428 |
/* |
| 2429 |
* PHY DAC test register |
| 2430 |
*/ |
| 2431 |
#define AR5K_PHY_DAC_TEST 0x9c28 |
| 2432 |
#define AR5K_PHY_DAC_TEST_I 0x00000001 |
| 2433 |
#define AR5K_PHY_DAC_TEST_Q 0x00000200 |
| 2434 |
|
| 2435 |
/* |
| 2436 |
* PHY PTAT register (?) |
| 2437 |
*/ |
| 2438 |
#define AR5K_PHY_PTAT 0x9c2c |
| 2439 |
|
| 2440 |
/* |
| 2441 |
* PHY Illegal TX rate register [5112+] |
| 2442 |
*/ |
| 2443 |
#define AR5K_PHY_BAD_TX_RATE 0x9c30 |
| 2444 |
|
| 2445 |
/* |
| 2446 |
* PHY SPUR Power register [5112+] |
| 2447 |
*/ |
| 2448 |
#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ |
| 2449 |
#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ |
| 2450 |
#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ |
| 2451 |
#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ |
| 2452 |
|
| 2453 |
/* |
| 2454 |
* PHY Channel status register [5112+] (?) |
| 2455 |
*/ |
| 2456 |
#define AR5K_PHY_CHAN_STATUS 0x9c38 |
| 2457 |
#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 |
| 2458 |
#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 |
| 2459 |
#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 |
| 2460 |
#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 |
| 2461 |
|
| 2462 |
/* |
| 2463 |
* Heavy clip enable register |
| 2464 |
*/ |
| 2465 |
#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 |
| 2466 |
|
| 2467 |
/* |
| 2468 |
* PHY clock sleep registers [5112+] |
| 2469 |
*/ |
| 2470 |
#define AR5K_PHY_SCLOCK 0x99f0 |
| 2471 |
#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c |
| 2472 |
#define AR5K_PHY_SDELAY 0x99f4 |
| 2473 |
#define AR5K_PHY_SDELAY_32MHZ 0x000000ff |
| 2474 |
#define AR5K_PHY_SPENDING 0x99f8 |
| 2475 |
|
| 2476 |
|
| 2477 |
/* |
| 2478 |
* PHY PAPD I (power?) table (?) |
| 2479 |
* (92! entries) |
| 2480 |
*/ |
| 2481 |
#define AR5K_PHY_PAPD_I_BASE 0xa000 |
| 2482 |
#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) |
| 2483 |
|
| 2484 |
/* |
| 2485 |
* PHY PCDAC TX power table |
| 2486 |
*/ |
| 2487 |
#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 |
| 2488 |
#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) |
| 2489 |
|
| 2490 |
/* |
| 2491 |
* PHY mode register [5111+] |
| 2492 |
*/ |
| 2493 |
#define AR5K_PHY_MODE 0x0a200 /* Register Address */ |
| 2494 |
#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ |
| 2495 |
#define AR5K_PHY_MODE_MOD_OFDM 0 |
| 2496 |
#define AR5K_PHY_MODE_MOD_CCK 1 |
| 2497 |
#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ |
| 2498 |
#define AR5K_PHY_MODE_FREQ_5GHZ 0 |
| 2499 |
#define AR5K_PHY_MODE_FREQ_2GHZ 2 |
| 2500 |
#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ |
| 2501 |
#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ |
| 2502 |
#define AR5K_PHY_MODE_RAD_RF5111 0 |
| 2503 |
#define AR5K_PHY_MODE_RAD_RF5112 8 |
| 2504 |
#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ |
| 2505 |
#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ |
| 2506 |
#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ |
| 2507 |
|
| 2508 |
/* |
| 2509 |
* PHY CCK transmit control register [5111+ (?)] |
| 2510 |
*/ |
| 2511 |
#define AR5K_PHY_CCKTXCTL 0xa204 |
| 2512 |
#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 |
| 2513 |
#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 |
| 2514 |
#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 |
| 2515 |
#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 |
| 2516 |
|
| 2517 |
/* |
| 2518 |
* PHY CCK Cross-correlator Barker RSSI threshold register [5212+] |
| 2519 |
*/ |
| 2520 |
#define AR5K_PHY_CCK_CROSSCORR 0xa208 |
| 2521 |
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f |
| 2522 |
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 |
| 2523 |
|
| 2524 |
/* Same address is used for antenna diversity activation */ |
| 2525 |
#define AR5K_PHY_FAST_ANT_DIV 0xa208 |
| 2526 |
#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 |
| 2527 |
|
| 2528 |
/* |
| 2529 |
* PHY 2GHz gain register [5111+] |
| 2530 |
*/ |
| 2531 |
#define AR5K_PHY_GAIN_2GHZ 0xa20c |
| 2532 |
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 |
| 2533 |
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 |
| 2534 |
#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c |
| 2535 |
|
| 2536 |
#define AR5K_PHY_CCK_RX_CTL_4 0xa21c |
| 2537 |
#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 |
| 2538 |
#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 |
| 2539 |
|
| 2540 |
#define AR5K_PHY_DAG_CCK_CTL 0xa228 |
| 2541 |
#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 |
| 2542 |
#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 |
| 2543 |
#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 |
| 2544 |
|
| 2545 |
#define AR5K_PHY_FAST_ADC 0xa24c |
| 2546 |
|
| 2547 |
#define AR5K_PHY_BLUETOOTH 0xa254 |
| 2548 |
|
| 2549 |
/* |
| 2550 |
* Transmit Power Control register |
| 2551 |
* [2413+] |
| 2552 |
*/ |
| 2553 |
#define AR5K_PHY_TPC_RG1 0xa258 |
| 2554 |
#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 |
| 2555 |
#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 |
| 2556 |
#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 |
| 2557 |
#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 |
| 2558 |
#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 |
| 2559 |
#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 |
| 2560 |
#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 |
| 2561 |
#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 |
| 2562 |
|
| 2563 |
#define AR5K_PHY_TPC_RG5 0xa26C |
| 2564 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F |
| 2565 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 |
| 2566 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 |
| 2567 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 |
| 2568 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 |
| 2569 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 |
| 2570 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 |
| 2571 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 |
| 2572 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 |
| 2573 |
#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 |
| 2574 |
|
| 2575 |
/* |
| 2576 |
* PHY PDADC Tx power table |
| 2577 |
*/ |
| 2578 |
#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 |
| 2579 |
#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) |
| 2580 |
|
| 2581 |
/* |
| 2582 |
* Platform registers for WiSoC |
| 2583 |
*/ |
| 2584 |
#define AR5K_AR5312_RESET 0xbc003020 |
| 2585 |
#define AR5K_AR5312_RESET_BB0_COLD 0x00000004 |
| 2586 |
#define AR5K_AR5312_RESET_BB1_COLD 0x00000200 |
| 2587 |
#define AR5K_AR5312_RESET_WMAC0 0x00002000 |
| 2588 |
#define AR5K_AR5312_RESET_BB0_WARM 0x00004000 |
| 2589 |
#define AR5K_AR5312_RESET_WMAC1 0x00020000 |
| 2590 |
#define AR5K_AR5312_RESET_BB1_WARM 0x00040000 |
| 2591 |
|
| 2592 |
#define AR5K_AR5312_ENABLE 0xbc003080 |
| 2593 |
#define AR5K_AR5312_ENABLE_WLAN0 0x00000001 |
| 2594 |
#define AR5K_AR5312_ENABLE_WLAN1 0x00000008 |
| 2595 |
|
| 2596 |
#define AR5K_AR2315_RESET 0xb1000004 |
| 2597 |
#define AR5K_AR2315_RESET_WMAC 0x00000001 |
| 2598 |
#define AR5K_AR2315_RESET_BB_WARM 0x00000002 |
| 2599 |
|
| 2600 |
#define AR5K_AR2315_AHB_ARB_CTL 0xb1000008 |
| 2601 |
#define AR5K_AR2315_AHB_ARB_CTL_WLAN 0x00000002 |
| 2602 |
|
| 2603 |
#define AR5K_AR2315_BYTESWAP 0xb100000c |
| 2604 |
#define AR5K_AR2315_BYTESWAP_WMAC 0x00000002 |